Original commit by Ayonam Ray.
This commit adds a regression test for the issue discovered in the
previous commit: that the range check for the jump table can only be
omitted if the fall-through destination of the jump table is
unreachable, which isn't necessarily true just because the default of
the switch is unreachable.
This addresses the missing optimization in PR41242.
> During the lowering of a switch that would result in the generation of a
> jump table, a range check is performed before indexing into the jump
> table, for the switch value being outside the jump table range and a
> conditional branch is inserted to jump to the default block. In case the
> default block is unreachable, this conditional jump can be omitted. This
> patch implements omitting this conditional branch for unreachable
> defaults.
>
> Differential Revision: https://reviews.llvm.org/D52002
> Reviewers: Hans Wennborg, Eli Freidman, Roman Lebedev
llvm-svn: 357067
but the implementation is hard to extend. It doesn't currently have an
easy way to support intrinsics that, for example, lack a rounding mode.
This will be needed for impending new constrained intrinsics.
This code is split out of D55897 <https://reviews.llvm.org/D55897>, which
itself was split out of D43515 <https://reviews.llvm.org/D43515>.
Reviewed by: arsenm
Differential Revision: http://reviews.llvm.org/D59830
llvm-svn: 357065
Cleanup isAArch64FrameOffsetLegal by:
- Merging the large switch statement to reuse AArch64InstrInfo::getMemOpInfo().
- Using AArch64InstrInfo::getUnscaledLdSt() to determine whether an instruction
has an unscaled variant.
- Simplifying the logic that calculates the offset to fit the immediate.
Reviewers: paquette, evandro, eli.friedman, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D59636
llvm-svn: 357064
This re-commits r354263, which was because it uncovered with handling of
modules with empty (zero) UUIDs. This would cause us to treat two
modules as intentical even though they were not. This caused an assert
in PlaceholderObjectFile::SetLoadAddress to fire, because we were trying
to load the module twice even though it was designed to be only loaded
at a specific address. (The same problem also existed with the previous
implementation, but it had no asserts to warn us about this.) These
issues have now been fixed in r356896.
windows bot. The issue there was that ObjectFilePECOFF vended its base
address through the incorrect interface. SymbolFilePDB depended on that,
which lead to assertion failures when SymbolFilePDB was attempting to
use the placeholder object files as a base. This has been fixed in
r354258
The original commit message was:
The reason this wasn't working was that ProcessMinidump was creating odd
object-file-less modules, and SymbolFileBreakpad required the module to
have an associated object file because it needed to get its base
address.
This fixes that by introducing a PlaceholderObjectFile to serve as a
dummy object file. The general idea for this is taken from D55142, but
I've reworked it a bit to avoid the need for the PlaceholderModule
class. Now that we have an object file, our modules are sufficiently
similar to regular modules that we can use the regular Module class
almost out of the box -- the only thing I needed to tweak was the
Module::CreateModuleFromObjectFile functon to set the module's FileSpec
in addition to it's architecture. This wasn't needed for ObjectFileJIT
(the other user of CreateModuleFromObjectFile), but it shouldn't hurt it
either, and the change seems like a straightforward extension of this
function.
Reviewers: clayborg, lemo, amccarth
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D57751
llvm-svn: 357060
This patch mirrors the change made to the Unix equivalent in
r351916. This in turn fixes bugs related to the use of FileOutputBuffer
to output to "-", i.e. stdout, on Windows.
Differential Revision: https://reviews.llvm.org/D59663
llvm-svn: 357058
Enable SSE41 ZERO_EXTEND_VECTOR_INREG shuffle combines - for the PMOVZX(PSHUFD(V)) -> UNPCKH(V,0) pattern we reduce the shuffles (port5-bottleneck on Intel) at the expense of creating a zero (pxor v,v) and an extra register move - which is a good trade off as these are pretty cheap and in most cases it doesn't increase register pressure.
This also exposed a missed opportunity to use combine to ZERO_EXTEND_VECTOR_INREG with folded loads - even if we're in the float domain.
........
Causes PR41249
llvm-svn: 357057
This is diagnosed by gcc-8. The ValueType struct already has a default
constructor which performs zero-initialization, so we can just call that
instead of using memset.
llvm-svn: 357056
Summary:
gcc diagnoses this as "array subscript 63 is above array bounds of
'RegisterContextDarwin_arm64::VReg [32]'".
The correct fix seems to be subtracting the fpu register base index, but
I have no way of verifying that this actually works.
Reviewers: jasonmolenda
Subscribers: javed.absar, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D59495
llvm-svn: 357055
getAsCarry() checks that the input argument is a carry-producing node before
allowing a transformation to addcarry. This patch adds a check to make sure
that the carry-producing node is legal. If it is not, it may not remain in a
form that is manageable by the target backend. The test case caused a
compilation failure during instruction selection for this reason on SystemZ.
Patch by Ulrich Weigand.
Review: Sanjay Patel
https://reviews.llvm.org/D59822
llvm-svn: 357052
ToolOutputFile handles '-' so no need to specialize here.
Also, we neither reassign the variable nor pass it around, thus no need
to use std::unique_ptr<ToolOutputFile>.
exit(1) -> return 1; to call the destructor of raw_fd_stream
llvm-svn: 357051
We handle the case where the C2 does not fit in a signed 32-bit immediate, but
(C2>>C1) does. But there's also some 64-bit opportunities when C2 is not an unsigned
32-bit immediate, but (C2>>C1) is. For OR/XOR this allows us to load the
immediate with with MOV32ri instead of a movabsq. For AND it allows us to use a
32-bit AND and fold the immediate.
llvm-svn: 357050
Previously we manually selected the AND/OR/XOR with immediate and the SHL(or ADD if the shift is 1). But this was missing out on the opportunity to use a 64 bit AND with a 32-bit immediate and possibly other isel tricks we have built into the tables.
Instead, insert the new nodes into the DAG using insertDAGNode and allow them each to be selected through the normal table.
llvm-svn: 357049
This patch lays the groundwork for extending the generic machine scheduler by providing a PPC-specific implementation.
There are no functional changes as this is an incremental patch that simply provides the necessary overrides which just
encapsulate the behavior of the generic scheduler. Subsequent patches will add specific behavior.
Differential Revision: https://reviews.llvm.org/D59284
llvm-svn: 357047
We were manually outputting the code we would get from selecting ANY_EXTEND. We
can save some code by just letting an ANY_EXTEND go through isel on its own.
llvm-svn: 357045
Summary:
Instead of assuming that the language is C++ instead check the compunit
for the language it received from the debug info.
Subscribers: aprantl, jdoerfert
Differential Revision: https://reviews.llvm.org/D59805
llvm-svn: 357044
A section containing metadata on remark diagnostics will be emitted if
the flag (-mllvm) -remarks-section is present.
For now, the metadata is:
* a magic number for remarks: "REMARKS\0"
* the version number: a little-endian uint64_t
* the absolute file path to the serialized remark diagnostics: a
null-terminated string.
Differential Revision: https://reviews.llvm.org/D59571
llvm-svn: 357043
This fixes a false positive on the following, where st is configured to have
different sizes based on some preprocessor logic:
if (sizeof(buf) == sizeof(*st))
memcpy(&buf, st, sizeof(*st));
llvm-svn: 357041
MarkVarDeclODRUsed indirectly calls captureInBlock, which creates a copy
expression. The copy expression is insulated in it's own
ExpressionEvaluationContext, so it saves, mutates, and restores MaybeODRUseExprs
as CleanupVarDeclMarking is iterating through it, leading to a crash. Fix this
by iterating through a local copy of MaybeODRUseExprs.
rdar://47493525
https://reviews.llvm.org/D59670
llvm-svn: 357040
Split off from D59749. This uses a simpler and more efficient
implementation of isSignWrappedSet(), and considers full sets
as non-wrapped, to be consistent with isWrappedSet(). Otherwise
the behavior is unchanged.
There are currently only two users of this function and both already
check for isFullSet() || isSignWrappedSet(), so this is not going to
cause a change in overall behavior.
Differential Revision: https://reviews.llvm.org/D59848
llvm-svn: 357039
FileManager constructs a VFS in its constructor if it isn't passed one,
and there's no way to reset it. Make that contract clear by returning a
reference from its accessor.
https://reviews.llvm.org/D59388
llvm-svn: 357038
Remove CompilerInstance::VirtualFileSystem and
CompilerInstance::setVirtualFileSystem, instead relying on the VFS in
the FileManager. CompilerInstance and its clients already went to some
trouble to make these match. Now they are guaranteed to match.
As part of this, I added a VFS parameter (defaults to nullptr) to
CompilerInstance::createFileManager, to avoid repeating construction
logic in clients that just wanted to customize the VFS.
https://reviews.llvm.org/D59377
llvm-svn: 357037
A bunch of macros use the same variable name, and since CMake macros
don't get their own scope, the value persists across macro invocations,
and we can end up exporting targets which shouldn't be exported. Clear
the variable before each use to avoid this.
Converting these macros to functions would also help, since it would
avoid the variable leaking into its parent scope, and that's something I
plan to follow up with. It won't fully address the problem, however,
since functions still inherit variables from their parent scopes, so if
someone in the parent scope just happened to use the same variable name
we'd still have the same issue.
llvm-svn: 357036
Implement rounding mode support for addxf3/subxf3.
On architectures that implemented the support, this will access the
corresponding floating point environment register to apply the
correct rounding. For other architectures, it will keep the current
behaviour and use IEEE-754 default rounding mode (to nearest, ties
to even).
ARM32/AArch64 support implemented in this change. i386 and AMD64
will be added in a follow up change.
Differential Revision: https://reviews.llvm.org/D57143
llvm-svn: 357035
This patch splits the huge function PPCBranchSelector.cpp:runOnMachineFunction into several smaller functions.
No functional change.
Differential Revision: https://reviews.llvm.org/D59623
llvm-svn: 357033
When splitting a subrange we end up with two different subranges covering
two different, non overlapping, lanes.
As part of this splitting the VNIs of the original live-range need
to be dispatched to the subranges according to which lanes they are
actually defining.
Prior to this patch we were assuming that all values were defining
all lanes. This was wrong as demonstrated by llvm.org/PR40835.
Differential Revision: https://reviews.llvm.org/D59731
llvm-svn: 357032
Since AArch64 has default outlining behaviour, we need to make sure that
-mno-outline is actually passed along to the linker in this case. Otherwise,
it will run by default on minsize functions even when -mno-outline is specified.
Also fix the darwin-ld test for this, which wasn't actually doing anything.
llvm-svn: 357031
We have the folds for fadd/fsub/fmul already in DAGCombiner,
so it may be possible to remove that code if we can guarantee that
these ops are zapped before they can exist.
llvm-svn: 357029
The UseVSXReg flag can be safely removed and the code cleaned up.
Patch By: Yi-Hong Liu
Differential Revision: https://reviews.llvm.org/D58685
llvm-svn: 357028
Summary:
This option `AllowShortLambdasOnASingleLine` similar to the other `AllowShort*` options, but applied to C++ lambdas.
Reviewers: djasper, klimek
Reviewed By: klimek
Subscribers: MyDeveloperDay, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D57687
llvm-svn: 357027
This reverts commit rL357020.
The commit broke the test llvm/test/tools/llvm-objdump/embedded-source.test
on some builds including clang-ppc64be-linux-multistage,
clang-s390x-linux, clang-with-lto-ubuntu, clang-x64-windows-msvc,
llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast (and others).
llvm-svn: 357026
This reverts commit rL357020
Reason: rL357018, which this commit depend on breaks the test:
llvm/test/tools/llvm-objdump/embedded-source.test on some architectures.
llvm-svn: 357025
When the output buffer is too small to contain the output, `vsnprintf()`
fills the buffer and returns the number of characters that __would have__
been written if the buffer was sufficiently large.
`_vnsprintf_s()` on the other hand fills the buffer and returns -1 when this
happens. We want the former behavior, but we also want to be able to
pass in a locale to prevent having to call `setlocale()`.
`__stdio_common_vsprintf()` is the only function general enough to get
the behavior we want.
Differential Revision: https://reviews.llvm.org/D59727
llvm-svn: 357024
This change implements lowering of references global symbols in PIC
mode.
This change implements lowering of global references in PIC mode using a
new @GOT reference type. @GOT references can be used with function or
data symbol names combined with the get_global instruction. In this case
the linker will insert the wasm global that stores the address of the
symbol (either in memory for data symbols or in the wasm table for
function symbols).
For now I'm continuing to use the R_WASM_GLOBAL_INDEX_LEB relocation
type for this type of reference which means that this relocation type
can refer to either a global or a function or data symbol. We could
choose to introduce specific relocation types for GOT entries in the
future. See the current dynamic linking proposal:
https://github.com/WebAssembly/tool-conventions/blob/master/DynamicLinking.md
Differential Revision: https://reviews.llvm.org/D54647
llvm-svn: 357022
Reapply rL356943; the previous attempt was reverted because the patch rL356941
that this depended on had broken a test.
Original commit message:
[lld] Prevent duplicate files in debug line header in dwarf 5.
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59671
llvm-svn: 357020
Reapply rL356941 after regenerating the object file in the failing test
llvm/test/tools/llvm-objdump/embedded-source.test from source.
Original commit message:
[llvm] Prevent duplicate files in debug line header in dwarf 5.
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 357018
Hans Wennborg