Summary:
When inserting uses from outside the MemorySSA creation, we don't
normally need to rename uses, based on the assumption that there will be
no inserted Phis (if Def existed that required a Phi, that Phi already
exists). However, when dealing with unreachable blocks, MemorySSA will
optimize away Phis whose incoming blocks are unreachable, and these Phis end
up being re-added when inserting a Use.
There are two potential solutions here:
1. Analyze the inserted Phis and clean them up if they are unneeded
(current method for cleaning up trivial phis does not cover this)
2. Leave the Phi in place and rename uses, the same way as whe inserting
defs.
This patch use approach 2.
Resolves first test in PR42940.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66033
llvm-svn: 369291
Rename file `tsan_libdispatch.cpp -> tsan_libdispatch_interceptors.cpp`
to make it clear that it's main purpose is defining interceptors.
llvm-svn: 369289
In D66424 it has been requested to move all the new tests added by r369278 into
resources-x86_64.s. That is because only the 8b/16 ops should be tested by
resources-cmpxchg.s. This partially reverts r369278.
llvm-svn: 369288
The motivating case are the changes in vector-reduce-add.ll where
we were doing extra work in the scalar domain instead of shuffling.
There may be some one use check that needs to be looked into there,
but this patch sidesteps the issue by avoiding broadcasts that
aren't really broadcasting.
Differential Revision: https://reviews.llvm.org/D66071
llvm-svn: 369287
I don't think anything in this loop modifies the control flow and we don't restart any iteration after setting the flag.
This code was added in http://reviews.llvm.org/D16893 but looking at the test case added there the code that caused the dominator tree to change was merging blocks with their predecessor not the bitreverse optimization.
Differential Revision: https://reviews.llvm.org/D66366
llvm-svn: 369283
Summary:
Adds semantic highlighting for tokens that are a macro argument.
Example:
```
D_V(SomeVar);
```
The "SomeVar" inside the macro is highlighted as a variable now.
Tokens that are in a macro body expansion are ignored in this patch for three reasons.
* The spelling loc is inside the macro "definition" meaning it would highlight inside the macro definition (could probably easily be fixed by using getExpansionLoc instead of getSpellingLoc?)
* If wanting to highlight the macro definition this could create duplicate tokens. And if the tokens are of different types there would be conflicts (tokens in the same range but with different types). Say a macro defines some name and both a variable declaration and a function use this, there would be two tokens in the macro definition but one with Kind "Variable" and the other with Kind "Function".
* Thirdly, macro body expansions could come from a file that is not the main file (easily fixed, just check that the Loc is in the main file and not even a problem if we wanted to highlight the actual macro "invocation")
Reviewers: hokein, sammccall, ilya-biryukov
Subscribers: MaskRay, jkorous, arphaman, kadircet, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D64741
llvm-svn: 369275
On the matrix bot on GreenDragon [1] we want to run the test suite
against different DWARF versions. The idea here is not to replace
targeted tests for certain DWARF features, but rather to provide an easy
way to support this configuration.
[1] http://green.lab.llvm.org/green/view/LLDB/job/lldb-cmake-matrix/
Differential revision: https://reviews.llvm.org/D66370
llvm-svn: 369272
After D66007/r369262, if the control flow reaches `if (sym.isUndefined())`, we know:
* The relocation is not a link-time constant => symbol is preemptable => Undefined or SharedSymbol
* Not an undef weak.
* -no-pie.
* The symbol type is neither STT_OBJECT nor STT_FUNC.
ld.lld --export-dynamic --unresolved-symbols=ignore-all %t.o can satisfy
these conditions. Delete the isUndefined() test so that we error
`symbol '...' has no type`, because we don't know the type to make the
decision to create copy relocation/canonical PLT.
llvm-svn: 369271
The commit being reverted caused segfaults when building
with libc++ and GCC (and possibly other configurations).
Differential Revision: https://reviews.llvm.org/D62868
llvm-svn: 369270
Summary:
The windows version implementation of readNativeFileSlice, was trying to
match the POSIX behavior of not treating EOF as an error, but it was
only handling the case of reading from a pipe. Attempting to read past
the end of a regular file returns a slightly different error code, which
needs to be handled too. This patch adds ERROR_HANDLE_EOF to the list of
error codes to be treated as an end of file, and adds some unit tests
for the API.
This issue was found while attempting to land D66224, which caused a bunch of
lldb tests to start failing on windows.
Reviewers: rnk, aganea
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66344
llvm-svn: 369269
Summary:
The general fold is only valid for positive divisors.
Which effectively means, it is invalid for `INT_MIN` divisors,
and we currently bailout if we see them.
But that is too strict, we can just fix-up the results.
For that, let's do a second computation 'in parallel':
```
Name: srem -> and
Pre: isPowerOf2(C)
%o = srem i8 %X, C
%r = icmp eq %o, 0
=>
%n = and i8 %X, C-1
%r = icmp eq %n, 0
```
https://rise4fun.com/Alive/Sup
And then just blend results: if the divisor was `INT_MIN`,
pick the value we got via bit-test,
else pick the value from general fold.
There's interesting observation - `ISD::ROTR` is set to
`LegalizeAction::Expand` before AVX512, so we should not
treat `INT_MIN` divisor as even; and as it can be seen
while `@test_srem_odd_even_one` improves on all run-lines,
`@test_srem_odd_even_INT_MIN` only improves for AVX512.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66300
llvm-svn: 369268
This function is just a wrapper for GetNumberOfResults and will
be removed soon. This patch just changes all calls to GetNumberOfResults
where possible (which is currently just the unit test).
llvm-svn: 369267
There are 4 methods that return std::error_code now,
though they do not have to because they are always succeed.
I refactored them.
This allows to simplify the code in tools a bit.
llvm-svn: 369263
In processRelocAux(), we handle errors before copy relocation/canonical PLT.
This makes error checking a bit complex because we have to check for
conditions that will be allowed by copy relocation/canonical PLT.
Instead, move copy relocation/canonical PLT before error checking. This
simplifies the previous clumsy error checking code
`config->shared || (config->pie && expr == R_ABS && type != target->symbolicRel)`
to the simple `config->isPic`. Some diagnostics can be reported in
different ways. The code motion changes diagnostics for some contrived
test cases:
* copy-rel-pie-error.s -> copy-rel-pie2.s:
It was rejected before but accepted now. ld.bfd also accepts the case.
* copy-errors.s: "cannot preempt symbol" changes to "symbol 'bar' has no type"
* got32{,x}-i386.s: the suggestion changes from "-fPIC or -Wl,-z,notext" to "-fPIE"
* x86-64-dyn-rel-error5.s: one diagnostic changes for -pie case
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D66007
llvm-svn: 369262
Summary:
If we have a MI marked with bitcast bits, but without input operands,
PeepholeOptimizer might crash with assert.
eg:
If we apply the changes in PPCInstrVSX.td as in this patch:
[(set v4i32:$XT, (bitconvert (v16i8 immAllOnesV)))]>;
We will get assert in PeepholeOptimizer.
```
llvm-lit llvm-project/llvm/test/CodeGen/PowerPC/build-vector-tests.ll -v
llvm-project/llvm/include/llvm/CodeGen/MachineInstr.h:417: const
llvm::MachineOperand &llvm::MachineInstr::getOperand(unsigned int)
const: Assertion `i < getNumOperands() && "getOperand() out of range!"'
failed.
```
The fix is to abort if we found out of bound access.
Reviewers: qcolombet, MatzeB, hfinkel, arsenm
Reviewed By: qcolombet
Subscribers: wdng, arsenm, steven.zhang, wuzish, nemanjai, hiraditya, kbarton, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65542
llvm-svn: 369261
Like rLLD354040
Previously, for unknown relocation types, in -no-pie/-pie mode, we got something like:
foo.o: unrecognized relocation ...
In -shared mode:
error: can't create dynamic relocation ... against symbol: yyy in readonly segment
Delete the default case from Hexagon::getRelExpr and add the error there. We will get consistent error message like `error: unknown relocation (1024) against symbol foo`
Reviewed By: sidneym
Differential Revision: https://reviews.llvm.org/D66275
llvm-svn: 369260
CGLoopInfo was keeping pointers to parent loop LoopInfos, but when the loop info vector grew, it reallocated the storage and invalidated all of the parent pointers, causing use-after-free. Manage the lifetimes of the LoopInfos separately so that the pointers aren't stale.
Patch by Bevin Hansson.
llvm-svn: 369259
The current behavior of shouldForceRelocation forces relocations for the
majority of fixups when relaxation is enabled. This makes sense for
fixups which incorporate symbols but is unnecessary for simple data
fixups where the fixup target is already resolved to an absolute value.
Differential Revision: https://reviews.llvm.org/D63404
Patch by Edward Jones.
llvm-svn: 369257
Summary:
Extend the MIR parser and writer so that the call site information can
refer to calls that are bundled.
Reviewers: aprantl, asowda, NikolaPrica, djtodoro, ivanbaev, vsk
Reviewed By: aprantl
Subscribers: arsenm, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D66145
llvm-svn: 369256
Generic types are an abstraction of type sets. It mimics the way
functions are defined in the OpenCL specification. For example,
floatN can abstract all the vector sizes of the float type.
This allows to
* stick more closely to the specification, which uses generic types;
* factorize definitions of functions with numerous prototypes in the
tablegen file; and
* reduce the memory impact of functions with many overloads.
Patch by Pierre Gondois and Sven van Haastregt.
Differential Revision: https://reviews.llvm.org/D65456
llvm-svn: 369253
Rewrite the logic for detecting if we are deducing addr space of
a pointee type to take into account special logic for arrays. For
pointers/references to arrays we can have any number of parentheses
expressions as well as nested pointers.
Differential Revision: https://reviews.llvm.org/D66137
llvm-svn: 369251
These tests are mostly trying to reach the different completion functions
in CommandCompletions.cpp (::ArchitectureNames, ::DiskFiles, ::Modules).
llvm-svn: 369249
Currently the machine instruction sinker identifies DBG_VALUE insts that
also need to sink by comparing register numbers. Unfortunately this isn't
safe, because (after register allocation) a DBG_VALUE may read a register
that aliases what's being sunk. To fix this, identify the DBG_VALUEs that
need to sink by recording & examining their register units. Register units
gives us the following guarantee:
"Two registers overlap if and only if they have a common register unit"
[MCRegisterInfo.h]
Thus we can always identify aliasing DBG_VALUEs if the set of register
units read by the DBG_VALUE, and the register units of the instruction
being sunk, intersect. (MachineSink already uses classes like
"LiveRegUnits" for determining sinking validity anyway).
The test added checks for super and subregister DBG_VALUE reads of a sunk
copy being sunk as well.
Differential Revision: https://reviews.llvm.org/D58191
llvm-svn: 369247
Add a test that takes the maximum amount of passes permitted to converge.
This will make sure that any symbol defined in a linker script gets the
correct value and that any other convergence limit involving symbol address
doesn't restrict Thunk convergence.
Differential Revision: https://reviews.llvm.org/D66346
llvm-svn: 369246
This patch adds vecreduce_add and the relevant instruction selection for
vaddv.
Differential revision: https://reviews.llvm.org/D66085
llvm-svn: 369245
This adds some sext costs for MVE, taken from the length of assembly sequences
that we currently generate.
Differential Revision: https://reviews.llvm.org/D66010
llvm-svn: 369244
LiveDebugVariables can coalesce ranges of variable locations across
multiple basic blocks. However when it recreates DBG_VALUE instructions,
it has to recreate one DBG_VALUE per block, otherwise it doesn't
represent the pre-regalloc layout and variable assignments can go missing.
This feature works -- however while mucking around with LiveDebugVariables,
I commented the relevant code it out and no tests failed. Thus, here's a
test that checks LiveDebugVariables preserves DBG_VALUEs across block
boundaries.
Differential Revision: https://reviews.llvm.org/D66347
llvm-svn: 369243
Sam Clegg