replica
/
hanchenye-llvm-project
2
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
hanchenye-llvm-project/llvm/test/CodeGen/Mips/mips16_32_5.ll

79 lines
1.9 KiB
LLVM
Raw Normal View History

[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -march=mipsel -mattr=mips16 -relocation-model=static -O3 < %s -mips-mixed-16-32 | FileCheck %s -check-prefix=16
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. llvm-svn: 179118
2013-04-10 03:46:01 +08:00
; RUN: llc -march=mipsel -mcpu=mips32 -relocation-model=static -O3 < %s -mips-mixed-16-32 | FileCheck %s -check-prefix=32
define void @foo() #0 {
entry:
ret void
}
Fix a low hanging use of hasRawTextSupport. This also fixes the placement of the function label comment. It was being placed next to the mips16 directive instead of next to the label. llvm-svn: 199245
2014-01-15 02:57:12 +08:00
; 16: .set mips16
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. llvm-svn: 179118
2013-04-10 03:46:01 +08:00
; 16: .ent foo
Last change for mips16 prolog/epilog cleanup and optimization. Some tiny cosmetic code changes to follow. Because of the wide ranging nature of the patch a full 24 test cycle was needed to check against regression. This was the smallest patch I could make to progress from the earlier ones in the series. llvm-svn: 197350
2013-12-16 04:49:30 +08:00
; 16: jrc $ra
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. llvm-svn: 179118
2013-04-10 03:46:01 +08:00
; 16: .end foo
Fix a low hanging use of hasRawTextSupport. This also fixes the placement of the function label comment. It was being placed next to the mips16 directive instead of next to the label. llvm-svn: 199245
2014-01-15 02:57:12 +08:00
; 32: .set mips16
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. llvm-svn: 179118
2013-04-10 03:46:01 +08:00
; 32: .ent foo
Last change for mips16 prolog/epilog cleanup and optimization. Some tiny cosmetic code changes to follow. Because of the wide ranging nature of the patch a full 24 test cycle was needed to check against regression. This was the smallest patch I could make to progress from the earlier ones in the series. llvm-svn: 197350
2013-12-16 04:49:30 +08:00
; 32: jrc $ra
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. llvm-svn: 179118
2013-04-10 03:46:01 +08:00
; 32: .end foo
define void @nofoo() #1 {
entry:
ret void
}
Fix a low hanging use of hasRawTextSupport. This also fixes the placement of the function label comment. It was being placed next to the mips16 directive instead of next to the label. llvm-svn: 199245
2014-01-15 02:57:12 +08:00
; 16: .set nomips16
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. llvm-svn: 179118
2013-04-10 03:46:01 +08:00
; 16: .ent nofoo
; 16: .set noreorder
; 16: .set nomacro
; 16: .set noat
; 16: jr $ra
; 16: nop
; 16: .set at
; 16: .set macro
; 16: .set reorder
; 16: .end nofoo
Fix a low hanging use of hasRawTextSupport. This also fixes the placement of the function label comment. It was being placed next to the mips16 directive instead of next to the label. llvm-svn: 199245
2014-01-15 02:57:12 +08:00
; 32: .set nomips16
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. llvm-svn: 179118
2013-04-10 03:46:01 +08:00
; 32: .ent nofoo
; 32: .set noreorder
; 32: .set nomacro
; 32: .set noat
; 32: jr $ra
; 32: nop
; 32: .set at
; 32: .set macro
; 32: .set reorder
; 32: .end nofoo
define i32 @main() #2 {
entry:
ret i32 0
}
Fix a low hanging use of hasRawTextSupport. This also fixes the placement of the function label comment. It was being placed next to the mips16 directive instead of next to the label. llvm-svn: 199245
2014-01-15 02:57:12 +08:00
; 16: .set nomips16
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. llvm-svn: 179118
2013-04-10 03:46:01 +08:00
; 16: .ent main
; 16: .set noreorder
; 16: .set nomacro
; 16: .set noat
; 16: jr $ra
; 16: addiu $2, $zero, 0
; 16: .set at
; 16: .set macro
; 16: .set reorder
; 16: .end main
Fix a low hanging use of hasRawTextSupport. This also fixes the placement of the function label comment. It was being placed next to the mips16 directive instead of next to the label. llvm-svn: 199245
2014-01-15 02:57:12 +08:00
; 32: .set nomips16
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. llvm-svn: 179118
2013-04-10 03:46:01 +08:00
; 32: .ent main
; 32: .set noreorder
; 32: .set nomacro
; 32: .set noat
; 32: jr $ra
; 32: addiu $2, $zero, 0
; 32: .set at
; 32: .set macro
; 32: .set reorder
; 32: .end main
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'. llvm-svn: 189068
2013-08-23 05:28:54 +08:00
attributes #0 = { nounwind "less-precise-fpmad"="false" "mips16" "no-frame-pointer-elim"="false" "no-frame-pointer-elim-non-leaf" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #1 = { nounwind "less-precise-fpmad"="false" "no-frame-pointer-elim"="false" "no-frame-pointer-elim-non-leaf" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "nomips16" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #2 = { nounwind "less-precise-fpmad"="false" "nomips16" "no-frame-pointer-elim"="false" "no-frame-pointer-elim-non-leaf" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "unsafe-fp-math"="false" "use-soft-float"="false" }