gimp/INSTALL.in

529 lines
24 KiB
Plaintext
Raw Normal View History

---------------------------------------
Installation instructions for GIMP @GIMP_APP_VERSION@
---------------------------------------
There are some basic steps to building and installing GIMP.
GIMP @GIMP_APP_VERSION@ replaces earlier GIMP 2.x versions. It is advised that you
uninstall them before installing GIMP @GIMP_APP_VERSION@. If you want to keep your
older GIMP 2.x installation in parallel to GIMP @GIMP_APP_VERSION@, you have to
choose a separate prefix which is not in your default library search
path.
GIMP @GIMP_APP_VERSION@ is fully backward compatible to all earlier GIMP 2.x version.
Plug-ins and scripts written for GIMP 2.8, 2.6 or earlier GIMP 2.x
versions will continue to work and don't need to be changed nor
recompiled to be used with GIMP @GIMP_APP_VERSION@.
The most important part is to make sure the requirements for a build
are fulfilled. We depend on a number of tools and libraries which are
listed below. For libraries this means you need to also have the
header files installed.
2009-05-13 16:19:52 +08:00
******************************************************************
* Unless you are experienced with building software from source, *
* you should not attempt to build all these libraries yourself! *
* We suggest that you check if your distributor has development *
* packages of them and use these instead. *
******************************************************************
2009-05-13 16:19:52 +08:00
1. You need to have installed a recent version of pkg-config (>= @GIMP_PKGCONFIG_VERSION@) available
from https://www.freedesktop.org/software/pkgconfig/.
2. You need intltool (at least @INTLTOOL_REQUIRED_VERSION@, but preferably a newer version).
Intltool can be downloaded from
https://ftp.gnome.org/pub/gnome/sources/intltool/
You also need gettext version @XGETTEXT_REQUIRED_VERSION@ or over. Earlier gettext had
issues with script-fu localization, ending up in incomplete GIMP localization.
3. You need to have GEGL version @GEGL_REQUIRED_VERSION@ or newer and babl version
@BABL_REQUIRED_VERSION@ or newer. You can get them from https://gegl.org/ or clone
2009-04-25 23:57:19 +08:00
them from the GNOME git repository:
https://gitlab.gnome.org/GNOME/babl.git
https://gitlab.gnome.org/GNOME/gegl.git
Note: install GEGL with libumfpack (SuiteSparse) for alternative Matting
engine "gegl:matting-levin" and OpenEXR library for OpenEXR format
support.
4. You need to have installed GTK+ version @GTK_REQUIRED_VERSION@ or newer.
GIMP also needs a recent version of GLib (>= @GLIB_REQUIRED_VERSION@), GDK-Pixbuf
(>= @GDK_PIXBUF_REQUIRED_VERSION@), and Pango (>= @PANGOCAIRO_REQUIRED_VERSION@). Sources for these can be grabbed
from ftp://ftp.gtk.org/.
5. We use cairo >= @CAIRO_REQUIRED_VERSION@, which is hosted at
https://www.cairographics.org/.
6. We require PangoCairo, a Pango backend using Cairo. Make sure you
have Cairo, FreeType2 and fontconfig installed before you compile
Pango. GIMP depends on freetype2 being newer than version @FREETYPE2_REQUIRED_VERSION@
and fontconfig @FONTCONFIG_REQUIRED_VERSION@ or newer. Older versions are known to have
bugs that seriously affect the stability of GIMP.
2014-05-03 02:31:07 +08:00
We also require HarfBuzz @HARFBUZZ_REQUIRED_VERSION@ or newer, an
OpenType text shaping tool. As this is a dependency for Pango, you
will likely have it installed, but you may have to install a
development package for the headers.
2014-08-13 08:36:55 +08:00
7. The file-compressor plug-in requires zlib, libbzip2, and liblzma to
be installed. All these libraries are required dependencies.
8. For metadata access GIMP requires the gexiv2 @GEXIV2_REQUIRED_VERSION@ or newer library.
It is hosted at: https://wiki.gnome.org/Projects/gexiv2
9. libpng, libjpeg, libtiff and lcms are hard dependencies that can
not be disabled.
10. For MyPaint brushes, brushlib (libmypaint) @LIBMYPAINT_REQUIRED_VERSION@ is used.
The libmypaint repository is hosted at:
2014-07-23 00:03:46 +08:00
https://github.com/mypaint/libmypaint
2014-07-23 00:03:46 +08:00
If installing from repository, do not install the master branch!
Checkout the tag "v1.3.0" instead, or simply install from a tarball
or from your favorite package manager.
11. We also need the mypaint-brushes data package:
https://github.com/mypaint/mypaint-brushes
If installing from repository, install from branch "v1.3.x" or the
particular tag "v1.3.0". In particular do not install from master
which installs brushes incompatible with GIMP.
Also this is a data packages and therefore it will install the
pkg-config file inside `$PREFIX/share/pkgconfig/`. If you install
mypaint-brushes from repository in a non-standard prefix, you will
have to make sure your $PKG_CONFIG_PATH environment variable also
lists `$PREFIX/share/pkgconfig/`.
12. You may want to install other third party libraries or programs
that are needed for some of the available plug-ins. We recommend
to check that the following libraries are installed: openjpeg,
webkit, libmng, librsvg, libwmf, libaa and libgs (Ghostscript).
13. HEIF support depends on the libheif library. If you don't have
access to pre-built packages, the code is available at:
https://github.com/strukturag/libheif
Make sure you build libheif with libde265 and libx265 support (for
respectively decoding and encoding), otherwise the plug-in is
mostly useless.
14. The Python extension requires Python 2 development headers (@PYTHON2_REQUIRED_VERSION@
or newer) to be present. You will also need PyGTK and the
respective development headers.
15. Windows builds can now generate backtrace logs upon a crash.
The logs will be available in: %APPDATA%\GIMP\@GIMP_APP_VERSION@\CrashLog\
The feature depends on Dr.MinGW's ExcHndl library:
https://github.com/jrfonseca/drmingw
16. Configure GIMP by running the `configure' script. You may want
to pass some options to it, see below.
17. Build GIMP by running `make'. The use of GNU make is recommended.
If you need to tweak the build to make it work with other flavours
of make, we'd appreciate if you'd send us a patch with the changes.
18. Install GIMP by running `make install'. In order to avoid clashes
with other versions of GIMP, we install a binary called gimp-@GIMP_APP_VERSION@.
By default there's also a link created so that you can type 'gimp'
to start gimp-@GIMP_APP_VERSION@.
19. Summary of required packages and what version you need:
Package Name Version
appstream-glib @APPSTREAM_GLIB_REQUIRED_VERSION@
ATK @ATK_REQUIRED_VERSION@
babl @BABL_REQUIRED_VERSION@
cairo @CAIRO_REQUIRED_VERSION@
Fontconfig @FONTCONFIG_REQUIRED_VERSION@
freetype2 @FREETYPE2_REQUIRED_VERSION@
GDK-PixBuf @GDK_PIXBUF_REQUIRED_VERSION@
GEGL @GEGL_REQUIRED_VERSION@
gexiv2 @GEXIV2_REQUIRED_VERSION@
GIO
GLib @GLIB_REQUIRED_VERSION@
glib-networking
GTK+ @GTK_REQUIRED_VERSION@
HarfBuzz @HARFBUZZ_REQUIRED_VERSION@
libbzip2
libjpeg
liblzma @LIBLZMA_REQUIRED_VERSION@
libmypaint @LIBMYPAINT_REQUIRED_VERSION@
libpng @LIBPNG_REQUIRED_VERSION@
libpoppler-glib @POPPLER_REQUIRED_VERSION@
librsvg @RSVG_REQUIRED_VERSION@
libtiff
Little CMS @LCMS_REQUIRED_VERSION@
mypaint-brushes-1.0
pangocairo @PANGOCAIRO_REQUIRED_VERSION@
poppler-data @POPPLER_DATA_REQUIRED_VERSION@
zlib
1997-11-25 06:05:25 +08:00
20. Summary of optional packages:
Package Name Version Feature
cairo-pdf @CAIRO_PDF_REQUIRED_VERSION@ PDF export
ExcHndl - Crash logs on Windows with Dr. MinGW
gs - ghostscript
libaa - ASCII art
libheif @LIBHEIF_REQUIRED_VERSION@ HEIF
libmng - MNG
libwebp @WEBP_REQUIRED_VERSION@ WebP (built with --enable-libwebpmux and --enable-libwebpdemux)
libwmf @WMF_REQUIRED_VERSION@ WMF
libXcursor - X11 Mouse Cursor
libxpm - XPM
openexr @OPENEXR_REQUIRED_VERSION@ OpenEXR
OpenJPEG @OPENJPEG_REQUIRED_VERSION@ JPEG 2000
python 2 @PYTHON2_REQUIRED_VERSION@ Python plug-ins
webkit @WEBKITGTK_REQUIRED_VERSION@ Help browser & webpage
21. Summary of optional runtime dependencies:
darktable >= 1.7, with lua support enabled for raw loading
RawTherapee >= 5.2 for raw loading
xdg-email for sending emails
sendmail for sending emails if --with-sendmail enabled
gdb or lldb for our new bug-reporting dialog
"gegl:matting-levin" GEGL operation for alternative matting engine
2009-05-13 16:19:52 +08:00
Please make sure you don't have any old GTK+-2.x, jpeg, etc. libraries
lying around on your system, otherwise configure may fail to find the
new ones.
1997-11-25 06:05:25 +08:00
Generic instructions for configuring and compiling auto-configured
packages are included below. Here is an illustration of commands that
might be used to build and install GIMP. The actual configuration,
1997-11-25 06:05:25 +08:00
compilation and installation output is not shown.
% tar xvfz gimp-@GIMP_VERSION@.tar.gz # unpack the sources
% cd gimp-@GIMP_VERSION@ # change to the toplevel directory
% ./configure # run the `configure' script
% make # build GIMP
% make install # install GIMP
1997-11-25 06:05:25 +08:00
The `configure' script examines your system, and adapts GIMP to run on
it. The script has many options, some of which are described in the
generic instructions included at the end of this file. All of the
1997-11-25 06:05:25 +08:00
options can be listed using the command `./configure --help'. There
are several special options the GIMP `configure' script recognizes.
These are:
1997-11-25 06:05:25 +08:00
--disable-vector-icons. This option installs raster icons instead of
vector icons.
--enable-relocatable-bundle. This option forces GIMP to search some
resources (e.g. MyPaint brushes or libwmf fonts) relatively to the
running prefix, rather than using build-time paths.
--enable-shared and --disable-shared. This option affects whether
1997-11-25 06:05:25 +08:00
shared libraries will be built or not. Shared libraries provide
Makefile.am configure.in added stuff for the new library below. 2001-01-23 Michael Natterer <mitch@gimp.org> * Makefile.am * configure.in * gimptool.in: added stuff for the new library below. * libgimpcolor/.cvsignore * libgimpcolor/Makefile.am * libgimpcolor/gimpcolor.h * libgimpcolor/gimpcolorspace.c * libgimpcolor/gimpcolorspace.h * libgimpcolor/gimpcolortypes.h * libgimpcolor/gimphsv.c * libgimpcolor/gimphsv.h * libgimpcolor/gimprgb.c * libgimpcolor/gimprgb.h: new shared library which both the app and plug-ins link against. The library depends only on glib. * libgimpcolor/gimpcolor.def * libgimpcolor/makefile.mingw.in * libgimpcolor/makefile.msc: added Win32 build files which definitely don't work. * libgimp/Makefile.am * libgimp/gimpcolor.[ch] * libgimp/gimpcolorspace.[ch]: removed. * libgimp/gimp.h * libgimp/gimpadaptivesupersample.c * libgimp/gimpbilinear.c * libgimp/gimppalette.c * libgimp/gimptypes.h: include the stuff from libgimpcolor. Plug-Ins don't need to include <libgimpcolor/gimpcolor.h> explicitely. LibGimp depends on libgimpcolor and thus also includes it's headers. * libgimp/gimp.def * libgimp/makefile.mingw.in: fiddled around with Win32 stuff... * app/Makefile.am: link against libgimpcolor.la * app/apptypes.h: include "libgimpcolor/gimpcolortypes.h" * app/asupsample.c * app/channels_dialog.c * app/colormap_dialog.c * app/commands.c * app/convert.c * app/devices.c * app/disp_callbacks.c * app/drawable.c * app/gimpcontext.c * app/gimpdnd.c * app/gimpimage.c * app/gimppalette.c * app/gimprc.c * app/gradient.c * app/libgimp_glue.c * app/palette.c * app/palette_import.c * app/qmask.c * app/xcf.c * app/tools/paint_core.c * app/tools/paintbrush.c * app/tools/pencil.c: include "libgimpcolor/gimpcolor.h" before all gimp includes because it's a standalone library. * plug-ins/FractalExplorer/Makefile.am * plug-ins/Lighting/Makefile.am * plug-ins/MapObject/Makefile.am * plug-ins/bmp/Makefile.am * plug-ins/common/Makefile.am * plug-ins/common/mkgen.pl * plug-ins/dbbrowser/Makefile.am * plug-ins/faxg3/Makefile.am * plug-ins/fits/Makefile.am * plug-ins/flame/Makefile.am * plug-ins/fp/Makefile.am * plug-ins/gap/Makefile.am * plug-ins/gdyntext/Makefile.am * plug-ins/gfig/Makefile.am * plug-ins/gflare/Makefile.am * plug-ins/gfli/Makefile.am * plug-ins/gimpressionist/Makefile.am * plug-ins/helpbrowser/Makefile.am * plug-ins/ifscompose/Makefile.am * plug-ins/imagemap/Makefile.am * plug-ins/maze/Makefile.am * plug-ins/mosaic/Makefile.am * plug-ins/pagecurl/Makefile.am * plug-ins/print/Makefile.am * plug-ins/rcm/Makefile.am * plug-ins/script-fu/Makefile.am * plug-ins/sel2path/Makefile.am * plug-ins/sgi/Makefile.am * plug-ins/webbrowser/Makefile.am * plug-ins/xjt/Makefile.am: add libgimpcolor.la to LDADD. * INSTALL: don't recommend to --disable-shared for development. * TODO.xml: increased some percentages, added plug-in help stuff.
2001-01-24 02:49:44 +08:00
for much smaller executables. The default is to enable shared
libraries. Disabling shared libraries is almost never a good idea.
1997-11-25 06:05:25 +08:00
--enable-debug and --disable-debug. This option causes the build
1997-11-25 06:05:25 +08:00
process to compile with debugging enabled. If debugging is
disabled, GIMP will instead be compiled with optimizations turned
1997-11-25 06:05:25 +08:00
on. The default is for debugging to be disabled. NOTE: This
option is intended primarily as a convenience for developers.
--enable-profile and --disable-profile. This option causes the build
process to compile with execution profiling enabled. The default is
for profiling to be disabled. NOTE: This option is intended primarily
as a convenience for developers.
--enable-ansi and --disable-ansi. This option causes stricter
1997-11-25 06:05:25 +08:00
ANSI C checking to be performed when compiling with GCC. The
default is for strict checking to be disabled. NOTE: This option
is intended primarily as a convenience for developers.
--with-gimpdir=DIR. This option changes the default directory
GIMP uses to search for its configuration files from
~/.config/GIMP/@GIMP_APP_VERSION@ (the directory .config/GIMP/@GIMP_APP_VERSION@
in the user's home directory) to ~/.config/DIR/@GIMP_APP_VERSION@.
If DIR is an absolute path, the directory will be changed to DIR.
--with-shm=[none|sysv|posix|auto]. This option allows you to specify
how image data is transported between the core and plug-ins. Usually
the best way to do this is detected automatically.
--without-libtiff. configure will bail out if libtiff can not be
found. You better fix the underlying problem and install these
libraries with their header files. If you absolutely want to
compile GIMP without support for TIFF you need to explicitly
disable them using this option.
--without-aa. The AA plug-in needs libaa and configure checks for
its presence. Use --without-aa if you run into problems.
--without-libxpm. The XPM plug-in needs libxpm and configure checks
for its presence. If for some reason you don't want to build the
XPM plug-in even though the library is installed, use
--without-libxpm to disable it explicitly.
--without-libmng. The MNG plug-in needs libmng and configure checks
for its presence. If for some reason you don't want to build the
MNG plug-in even though the library is installed, use
--without-libmng to disable it explicitly.
--without-wmf. The WMF plug-in needs libwmf2 and configure checks for
its presence. Use --without-wmf if you run into problems.
2009-05-13 16:19:52 +08:00
--without-webkit. If for some reason you don't want to build the
Help Browser plug-in, you can use --without-webkit to disable
it explicitly.
--without-librsvg. If for some reason you want to build GIMP without
SVG support, you can build --without-librsvg.
--without-print. If for some reason you don't want to build the Print
plug-in based on the GtkPrint API, you can build with --without-print.
--without-alsa. If you don't want to compile ALSA support into the
MIDI input controller module, you can use the --without-alsa option.
--without-linux-input. If you don't want to compile the Linux Input
controller module, you can use the --without-linux-input option.
--without-hal. If you want to build the Linux Input controller module
without HAL support, you can use the --without-hal option.
2010-06-02 02:45:46 +08:00
--without-mac-twain. If you don't want to compile the Mac OS X
TWAIN plug-in, you can use the --without-mac-twain option.
--with-gif-compression=[lzw|rle|none]. Allows to tune the compression
algorithm used by the GIF plug-in. If you are afraid of Unisys' LZW
patent (which should have expired in most countries by now), you
can go for simple run-length encoding or even configure the plug-in
to create uncompressed GIFs.
--enable-gtk-doc. This option controls whether the libgimp API
2009-05-13 16:19:52 +08:00
references will be created using gtk-doc. The HTML pages are
included in a standard tarball, so you will only need this if you
are building from SVN.
--with-html-dir=PATH. This option allows to specify where the
libgimp API reference should be installed. You might want to modify
the path so it points to the place where glib and gtk+ installed
their API references so that the libgimp reference can link to
them.
--disable-mp. This option allows you to disable support for multiple
processors. It is enabled by default.
2000-01-02 04:07:16 +08:00
--with-sendmail[=PATH]. This option is used to tell GIMP to send email
through sendmail instead of xdg-email. You can optionally indicate
where to find the sendmail command. Otherwise sendmail will simply
be searched in your $PATH at runtime.
--with-desktop-dir=[PATH]. This option specifies where to install
desktop files. These files are used by desktop environments that
comply to the specs published at freedesktop.org. The default
value ${prefix}/share should be fine if your desktop environment
is installed in the same prefix as gimp. No files are installed
if you call configure with --without-desktop-dir.
2000-01-02 04:07:16 +08:00
--disable-default-binary. Use this option if you don't want to make
gimp-@GIMP_APP_VERSION@ the default GIMP installation. Otherwise a link called
gimp pointing to the gimp-@GIMP_APP_VERSION@ executable will be installed.
--disable-gimp-console. Use this option if you don't want the
gimp-console binary to be built in addition to the standard binary.
gimp-console is useful for command-line batch mode or as a server.
--disable-python. If for some reason you don't want to build the
2009-05-13 16:19:52 +08:00
Python based PyGIMP plug-in, you can use --disable-python.
With this commit we finally say goodbye to SIOD. This large set of changes 2006-10-15 Kevin Cozens <kcozens@cvs.gnome.org> With this commit we finally say goodbye to SIOD. This large set of changes updates the Script-Fu plug-in to use the TinyScheme Scheme interpreter. These changes originated with changes originally made to Script-Fu which created Tiny-Fu (aka. the gimp-tiny-fu module). * plug-ins/script-fu/Makefile.am * plug-ins/script-fu/script-fu-console.c * plug-ins/script-fu/script-fu-interface.c * plug-ins/script-fu/script-fu-scripts.c * plug-ins/script-fu/script-fu-scripts.h * plug-ins/script-fu/script-fu-server.c * plug-ins/script-fu/script-fu-text-console.c * plug-ins/script-fu/script-fu.c: Updated with the changes made to these files as part of the work on the Tiny-Fu project. * plug-ins/script-fu/scheme-wrapper.c * plug-ins/script-fu/scheme-wrapper.h: Renamed from siod-wrapper.[ch] and updated based on differences to ts-wrapper.[ch] from gimp-tiny-fu. * plug-ins/script-fu/ftx/* * plug-ins/script-fu/re/* * plug-ins/script-fu/tinyscheme/* * plug-ins/script-fu/scripts/script-fu.init * plug-ins/script-fu/scripts/script-fu-compat.init * plug-ins/script-fu/scripts/contactsheet.scm * plug-ins/script-fu/scripts/script-fu-set-cmap.scm * plug-ins/script-fu/scripts/script-fu-util-setpt.scm * plug-ins/script-fu/scripts/ts-helloworld.scm: Added all of these files and directories from Tiny-Fu. Updated the Makefile.am files of ftx, re, and tinyscheme now they are in the GIMP source tree. * plug-ins/script-fu/scripts/*.scm: All scripts have been updated as needed to ensure they will work with the TinyScheme interpreter. Most of the files have been reformatted making it easier to see the syntax of Scheme and making them easier to read. * plug-ins/script-fu/scripts/Makefile.am: Updated script file lists. * plug-ins/script-fu/siod-wrapper.c * plug-ins/script-fu/siod-wrapper.h * plug-ins/script-fu/siod/*: Removed obsolete files. * configure.in: Updated list of files in AC_CONFIG_FILES. Changed --disable-script-fu to --without-script-fu which it should have been when originally added. * INSTALL: Updated to show change to --without-script-fu.
2006-10-16 09:08:54 +08:00
--without-script-fu. If for some reason you don't want to build the
Script-Fu plug-in, you can use --without-script-fu.
--without-xmc. The X11 Mouse Cursor(XMC) plug-in needs libXcursor
and configure checks for its presence. If for some reason you
don't want to build the XMC plug-in even though the library is
installed, use --without-xmc to disable it explicitly.
1997-11-25 06:05:25 +08:00
The `make' command builds several things:
- A bunch of public libraries in the directories starting with 'libgimp'.
- The plug-in programs in the 'plug-ins' directory.
- Some modules in the 'modules' subdirectory.
- The main GIMP program 'gimp-@GIMP_APP_VERSION@' in `app'.
1997-11-25 06:05:25 +08:00
2009-05-13 16:19:52 +08:00
The `make install' commands installs the GIMP header files associated
with the libgimp libraries, the plug-ins, some data files and the GIMP
executable. After running `make install' and assuming the build process
2001-11-13 12:13:58 +08:00
was successful you should be able to run `gimp'.
1997-11-25 06:05:25 +08:00
2000-01-02 04:07:16 +08:00
When ./configure fails
======================
'configure' uses pkg-config, a tool that replaces the old foo-config
2009-05-13 16:19:52 +08:00
scripts. The most recent version is available from
https://www.freedesktop.org/software/pkgconfig/
'configure' tries to compile and run a short GTK+ program. There are
several reasons why this might fail:
2009-05-13 16:19:52 +08:00
* pkg-config could not find the file 'gtk+-2.0.pc' that gets installed
with GTK. (This file is used to get information about where GTK+ is
installed.)
2009-05-13 16:19:52 +08:00
Fix: Either make sure that this file is in the path where pkg-config
looks for it (try 'pkg-config --debug' or add the location of
gtk+-2.0.pc to the environment variable PKG_CONFIG_PATH before running
configure.
2009-05-13 16:19:52 +08:00
* Libraries you installed are not found when you attempt to start GIMP.
The details of how to fix this problem will depend on the system:
On Linux and other systems using ELF libraries, add the directory to
holding the library to /etc/ld.so.conf or to the environment variable
LD_LIBRARY_PATH, and run 'ldconfig'.
On other systems, it may be necessary to encode this path
into the executable, by setting the LDFLAGS environment variable
before running configure. For example:
LDFLAGS="-R/home/joe/lib" ./configure
or
LDFLAGS="-Wl,-rpath -Wl,/home/joe/lib" ./configure
2009-05-13 16:19:52 +08:00
* An old version of the GTK+ libraries was found instead of
your newly installed version. This commonly happens if a
2003-03-20 17:47:38 +08:00
binary package of GTK+ was previously installed on your system,
and you later compiled GTK+ from source.
Fix: Remove the old libraries and include files. If you are afraid
that removing the old libraries may break other packages supplied by
your distributor, you can try installing GLib, GTK+ and other
libraries in a different prefix after setting the environment
variable PKG_CONFIG_LIBDIR to point to lib/pkgconfig/ in that new
prefix so that it does not try to read the *.pc files from the
default directory (/usr/lib/pkgconfig). However, removing the old
packages is often the easier solution.
A detailed log of the ./configure output is written to the file
config.log. This may help diagnose problems.
When ./configure fails on plug-ins
==================================
2009-05-13 16:19:52 +08:00
There are some GIMP plug-ins that need additional third-party libraries
installed on your system. For example to compile the plug-ins that load
and save JPEG, PNG or TIFF files you need the related libraries and header
files installed, otherwise you'll get a message that plug-in xyz will not
be built.
If you are sure that those libraries are correctly installed, but configure
fails to detect them, the following might help:
Set your LDFLAGS environment variable to look for the library in a certain
place, e.g. if you are working in a bash shell you would say:
export LDFLAGS="-L<path_to_library> -L<path_to_another_one>"
before you run configure.
Set your CPPFLAGS environment variable to look for the header file in a
certain place, e.g. if you are working in a bash shell you would say:
export CPPFLAGS="-I<path_to_header_file> -I<path_to_another_one>"
before you run configure.
1997-11-25 06:05:25 +08:00
Generic Instructions for Building Auto-Configured Packages
==========================================================
To compile this package:
1. Configure the package for your system. In the directory that this
file is in, type `./configure'. If you're using `csh' on an old
version of System V, you might need to type `sh configure' instead to
prevent `csh' from trying to execute `configure' itself.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation, and
creates the Makefile(s) (one in each subdirectory of the source
directory). In some packages it creates a C header file containing
system-dependent definitions. It also creates a file `config.status'
that you can run in the future to recreate the current configuration.
Running `configure' takes a minute or two.
To compile the package in a different directory from the one
containing the source code, you must use GNU make. `cd' to the
directory where you want the object files and executables to go and
run `configure' with the option `--srcdir=DIR', where DIR is the
directory that contains the source code. Using this option is
actually unnecessary if the source code is in the parent directory of
the one in which you are compiling; `configure' automatically checks
for the source code in `..' if it does not find it in the current
directory.
By default, `make install' will install the package's files in
/usr/local/bin, /usr/local/lib, /usr/local/man, etc. You can specify
an installation prefix other than /usr/local by giving `configure' the
2000-10-27 02:03:53 +08:00
option `--prefix=PATH'.
1997-11-25 06:05:25 +08:00
You can specify separate installation prefixes for machine-specific
files and machine-independent files. If you give `configure' the
option `--exec-prefix=PATH', the package will use PATH as the prefix
for installing programs and libraries. Normally, all files are
installed using the same prefix.
`configure' ignores any other arguments that you give it.
If your system requires unusual options for compilation or linking
that `configure' doesn't know about, you can give `configure' initial
values for some variables by setting them in the environment. In
Bourne-compatible shells, you can do that on the command line like
this:
CC='gcc -traditional' DEFS=-D_POSIX_SOURCE ./configure
The `make' variables that you might want to override with environment
variables when running `configure' are:
(For these variables, any value given in the environment overrides the
value that `configure' would choose:)
CC C compiler program.
Default is `cc', or `gcc' if `gcc' is in your PATH.
INSTALL Program to use to install files.
Default is `install' if you have it, `cp' otherwise.
INCLUDEDIR Directory for `configure' to search for include files.
Default is /usr/include.
(For these variables, any value given in the environment is added to
the value that `configure' chooses:)
DEFS Configuration options, in the form '-Dfoo -Dbar ...'
LIBS Libraries to link with, in the form '-lfoo -lbar ...'
If you need to do unusual things to compile the package, we encourage
you to teach `configure' how to do them and mail the diffs to the
address given in the README so we can include them in the next
release.
2. Type `make' to compile the package.
3. Type `make install' to install programs, data files, and
documentation.
4. You can remove the program binaries and object files from the
source directory by typing `make clean'. To also remove the
Makefile(s), the header file containing system-dependent definitions
(if the package uses one), and `config.status' (all the files that
`configure' created), type `make distclean'.
The file `configure.ac' is used as a template to create `configure' by
1997-11-25 06:05:25 +08:00
a program called `autoconf'. You will only need it if you want to
regenerate `configure' using a newer version of `autoconf'.