scnc
/
quantum-espresso
mirror of https://gitlab.com/QEF/q-e.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
quantum-espresso/Modules/autopilot.f90

929 lines
31 KiB
Fortran
Raw Blame History

! autopilot.f90
!********************************************************************************
! autopilot.f90 Copyright (c) 2005 Targacept, Inc.
!********************************************************************************
! The Autopilot Feature suite is a user level enhancement that enables the
! following features:
! automatic restart of a job;
! preconfiguration of job parameters;
! on-the-fly changes to job parameters;
! and pausing of a running job.
!
! For more information, see README.AUTOPILOT in document directory.
!
! This program is free software; you can redistribute it and/or modify it under
! the terms of the GNU General Public License as published by the Free Software
! Foundation; either version 2 of the License, or (at your option) any later version.
! This program is distributed in the hope that it will be useful, but WITHOUT ANY
! WARRANTY; without even the implied warranty of MERCHANTABILITY FOR A PARTICULAR
! PURPOSE. See the GNU General Public License at www.gnu.or/copyleft/gpl.txt for
! more details.
!
! THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
! EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
! PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
! INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
! FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND THE
! PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,
! YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
!
! IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING,
! WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE
! THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
! GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
! INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA
! BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
! FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER
! OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
!
! You should have received a copy of the GNU General Public License along with
! this program; if not, write to the
! Free Software Foundation, Inc.,
! 51 Franklin Street,
! Fifth Floor,
! Boston, MA 02110-1301, USA.
!
! Targacept's address is
! 200 East First Street, Suite 300
! Winston-Salem, North Carolina USA 27101-4165
! Attn: Molecular Design.
! Email: atp@targacept.com
!
! This work was supported by the Advanced Technology Program of the
! National Institute of Standards and Technology (NIST), Award No. 70NANB3H3065
!
!********************************************************************************
MODULE autopilot
!---------------------------------------------------------------------------
!! This module handles the Autopilot Feature Suite.
!
!! Written by Lee Atkinson, with help from the ATP team at Targacept, Inc.
!! Created June 2005.
!! Modified by Yonas Abraham, Sept 2006.
!
! The address for Targacept, Inc. is:
! 200 East First Street, Suite
! 300, Winston-Salem, North Carolina 27101;
! Attn: Molecular Design.
!
!! See README.AUTOPILOT in the Doc directory for more information.
!---------------------------------------------------------------------------
USE kinds
USE parser, ONLY : read_line
IMPLICIT NONE
SAVE
INTEGER, parameter :: MAX_INT = huge(1)
INTEGER, parameter :: max_event_step = 32 !right now there can be upto 32 Autopilot Events
INTEGER, parameter :: n_auto_vars = 10 !right now there are only 10 Autopilot Variables
INTEGER :: n_events
INTEGER :: event_index = 0
INTEGER :: max_rules = 320 !(max_event_step * n_auto_vars)
INTEGER :: n_rules
INTEGER :: event_step(max_event_step)
INTEGER :: current_nfi
LOGICAL :: pilot_p = .FALSE. ! pilot property
LOGICAL :: restart_p = .FALSE. ! restart property
LOGICAL :: pause_p = .FALSE. ! pause property
INTEGER :: pilot_unit = 42 ! perhaps move this to io_files
CHARACTER(LEN=256) :: pilot_type
! AUTOPILOT VARIABLES
! These are the variable tables which change the actual variable
! dynamically during the course of a simulation. There are many
! parameters which govern a simulation, yet only these are allowed
! to be changed using the event rule mechanism.
! Each of these tables are typed according to their variable
! and begin with event_
! &CONTROL
INTEGER :: rule_isave(max_event_step)
INTEGER :: rule_iprint(max_event_step)
LOGICAL :: rule_tprint(max_event_step)
REAL(DP) :: rule_dt(max_event_step)
! &SYSTEM
! &ELECTRONS
REAL(DP) :: rule_emass(max_event_step)
CHARACTER(LEN=80) :: rule_electron_dynamics(max_event_step)
REAL(DP) :: rule_electron_damping(max_event_step)
CHARACTER(LEN=80) :: rule_electron_orthogonalization(max_event_step)
! &IONS
CHARACTER(LEN=80) :: rule_ion_dynamics(max_event_step)
REAL(DP) :: rule_ion_damping(max_event_step)
CHARACTER(LEN=80) :: rule_ion_temperature(max_event_step)
REAL(DP) :: rule_tempw(max_event_step)
INTEGER :: rule_nhpcl(max_event_step)
REAL(DP) :: rule_fnosep(max_event_step)
! &CELL
! &PHONON
! Each rule also needs to be correlated (flagged) against the event time table
! This is used to flag the a given variable is to be changed on an
! event. Initially all set to false, a rule against an event makes it true
! Each of these flags are LOGICALs and begin with event_
! &CONTROL
LOGICAL :: event_isave(max_event_step)
LOGICAL :: event_iprint(max_event_step)
LOGICAL :: event_tprint(max_event_step)
LOGICAL :: event_dt(max_event_step)
! &SYSTEM
! &ELECTRONS
LOGICAL :: event_emass(max_event_step)
LOGICAL :: event_electron_dynamics(max_event_step)
LOGICAL :: event_electron_damping(max_event_step)
LOGICAL :: event_electron_orthogonalization(max_event_step)
! &IONS
LOGICAL :: event_ion_dynamics(max_event_step)
LOGICAL :: event_ion_damping(max_event_step)
LOGICAL :: event_ion_temperature(max_event_step)
LOGICAL :: event_tempw(max_event_step)
LOGICAL :: event_nhpcl(max_event_step)
LOGICAL :: event_fnosep(max_event_step)
! &CELL
! &PHONON
PRIVATE
PUBLIC :: auto_check, init_autopilot, card_autopilot, add_rule, &
& assign_rule, restart_p, max_event_step, event_index, event_step, rule_isave, &
& rule_iprint, &
& rule_tprint, &
& rule_dt, rule_emass, rule_electron_dynamics, rule_electron_damping, &
& rule_ion_dynamics, rule_ion_damping, rule_ion_temperature, rule_tempw, &
& rule_electron_orthogonalization, &
& event_isave, event_iprint, &
& event_tprint, &
& event_dt, event_emass, &
& event_electron_dynamics, event_electron_damping, event_ion_dynamics, &
& current_nfi, pilot_p, pilot_unit, pause_p,auto_error, parse_mailbox, &
& event_ion_damping, event_ion_temperature, event_tempw, &
& event_electron_orthogonalization, &
& event_nhpcl, event_fnosep, rule_nhpcl, rule_fnosep
CONTAINS
!----------------------------------------------------------------------------
SUBROUTINE auto_error( calling_routine, message)
!----------------------------------------------------------------------------
!! This routine calls errore based upon the pilot property flag.
!! If the flag is TRUE, the simulation will not stop,
!! but the pause property flag is set to TRUE,
!! causing pilot to force a state of sleep,
!! until the user can mail proper commands.
!! Otherwise, its assumed that dynamics have not started
!! and this call is an indirect result of read_cards.
!! Thus the simulation will stop.
!! Either way errore will always issues a warning message.
!
IMPLICIT NONE
!
CHARACTER(LEN=*), INTENT(IN) :: calling_routine
!! the name of the calling calling_routine
CHARACTER(LEN=*), INTENT(IN) :: message
!! the output message
!
INTEGER :: ierr
! the error flag
IF (pilot_p) THEN
! if ierr < 0 errore writes the message but does not stop
ierr = -1
pause_p = .TRUE.
!call mp_bcast(pause_p, ionode_id, world_comm)
ELSE
! if ierr > 0 it stops
ierr = 1
ENDIF
CALL errore( calling_routine, message, ierr )
END SUBROUTINE auto_error
!-----------------------------------------------------------------------
! AUTO (restart) MODE
!
! Checks if restart files are present, just like what readfile_cp does,
! which calls cp_readfile which create a path to restart.xml.
! This could be checked with inquire, as in check_restartfile.
! If restart_mode=auto, and restart.xml is present,
! then restart_mode="restart", else its "from_scratch".
! Set other associated vars, appropriately.
!
! Put this in setcontrol_flags on the select statement
!-----------------------------------------------------------------------
LOGICAL FUNCTION auto_check (ndr, outdir)
!---------------------------------------------------------------------
!! Checks if restart files are present.
!
USE io_global, ONLY: ionode, ionode_id
USE mp, ONLY : mp_bcast
USE mp_world, ONLY : world_comm
IMPLICIT NONE
INTEGER, INTENT(IN) :: ndr
!! I/O unit number
CHARACTER(LEN=*), INTENT(IN) :: outdir
!! output directory
!
! ... local variables
!
CHARACTER(LEN=256) :: dirname, filename
CHARACTER (LEN=6), EXTERNAL :: int_to_char
LOGICAL :: restart_p = .FALSE.
INTEGER :: strlen
! right now cp_readfile is called with outdir = ' '
! so, in keeping with the current design,
! the responsibility of setting
! ndr and outdir is the calling program
IF (ionode) THEN
dirname = 'RESTART' // int_to_char( ndr )
IF ( LEN( outdir ) > 1 ) THEN
strlen = index(outdir,' ') - 1
dirname = outdir(1:strlen) // '/' // dirname
END IF
filename = TRIM( dirname ) // '/' // 'restart.xml'
INQUIRE( FILE = TRIM( filename ), EXIST = restart_p )
auto_check = restart_p
END IF
CALL mp_bcast(auto_check, ionode_id, world_comm)
return
END FUNCTION auto_check
!-----------------------------------------------------------------------
SUBROUTINE init_autopilot
!---------------------------------------------------------------------
!! INITIALIZE AUTOPILOT: must be done, even if not in use.
!! Add this as a call in read_cards.f90 sub: card_default_values.
!
IMPLICIT NONE
!
integer :: event
pause_p = .FALSE.
! Initialize all events to an iteration that should never occur
DO event=1,max_event_step
event_step(event) = MAX_INT
ENDDO
n_events = 0
n_rules = 0
event_index = 1
! Initialize here
! &CONTROL
event_isave(:) = .false.
event_iprint(:) = .false.
event_tprint(:) = .false.
event_dt(:) = .false.
! &SYSTEM
! &ELECTRONS
event_emass(:) = .false.
event_electron_dynamics(:) = .false.
event_electron_damping(:) = .false.
event_electron_orthogonalization(:) = .false.
! &IONS
event_ion_dynamics(:) = .false.
event_ion_damping(:) = .false.
event_ion_temperature(:) = .false.
event_tempw(:) = .false.
! &CELL
! &PHONON
rule_isave(:) = 0
rule_iprint(:) = 0
rule_tprint(:) = .FALSE.
rule_dt(:) = 0.0_DP
rule_emass(:) = 0.0_DP
rule_electron_dynamics(:) = 'NONE'
rule_electron_damping(:) = 0.0_DP
rule_ion_dynamics(:) = 'NONE'
rule_ion_damping(:) = 0.0_DP
rule_ion_temperature(:) = 'NOT_CONTROLLED'
rule_tempw(:) = 0.01_DP
END SUBROUTINE init_autopilot
!-----------------------------------------------------------------------
SUBROUTINE card_autopilot( input_line )
!--------------------------------------------------------------------
!! Called in READ_CARDS and in PARSE_MAILBOX.
!
USE io_global, ONLY: ionode
!
IMPLICIT NONE
!
CHARACTER(LEN=256) :: input_line
!
! ... local variables
!
INTEGER :: i, j, linelen
LOGICAL :: process_this_line = .FALSE.
LOGICAL :: endrules = .FALSE.
LOGICAL :: tend = .FALSE.
LOGICAL, SAVE :: tread = .FALSE.
LOGICAL, EXTERNAL :: matches
CHARACTER(LEN=1), EXTERNAL :: capital
!ASU: copied this here since it seems not to be executed during each
! call of the routine. Needed for multiple rules in same block
process_this_line = .FALSE.
endrules = .FALSE.
tend = .FALSE.
tread = .FALSE.
! This is so we do not read a autopilot card twice from the input file
IF (( .NOT. pilot_p ) .and. tread ) THEN
CALL errore( ' card_autopilot ', ' two occurrences', 2 )
END IF
! If this routined has been called from parse_mailbox
! the pilot_type should be set
IF ( pilot_p ) THEN
! IF its MANUAL then process this line first!
! other skip this line and get the next
IF (TRIM(pilot_type) .eq. 'MANUAL') THEN
process_this_line = .TRUE.
ELSE IF (TRIM(pilot_type) .eq. 'PILOT') THEN
process_this_line = .FALSE.
ELSE IF (TRIM(pilot_type) .eq. 'AUTO') THEN
process_this_line = .FALSE.
ELSE
IF( ionode ) WRITE(*,*) 'AUTOPILOT: UNRECOGNIZED PILOT TYPE!', TRIM(pilot_type), '===='
GO TO 10
END IF
ELSE
! this routine is called from read_cards
pilot_type = 'AUTO'
process_this_line = .FALSE.
END IF
j=0
! must use a local (j) since n_rules may not get updated correctly
DO WHILE ((.NOT. endrules) .and. j<=max_rules)
j=j+1
IF (j > max_rules) THEN
CALL auto_error( ' AutoPilot ','Maximum Number of Dynamic Rules May Have Been Execced!')
go to 10
END IF
! Assume that pilot_p is an indicator and that
! this call to card_autopilot is from parse_mailbox
! and not from read_cards
IF(pilot_p) THEN
IF ( .NOT. process_this_line ) THEN
! get the next one
CALL read_line( input_line, end_of_file = tend)
END IF
ELSE
! from read_cards
CALL read_line( input_line, end_of_file = tend)
END IF
linelen = LEN_TRIM( input_line )
DO i = 1, linelen
input_line( i : i ) = capital( input_line( i : i ) )
END DO
! If ENDRULES isnt found, add_rule will fail
! and we run out of line anyway
IF ( tend .or. matches( 'ENDRULES', input_line ) ) GO TO 10
! Assume this is a rule
CALL ADD_RULE(input_line)
! now, do not process this line anymore
! make sure we get the next one
process_this_line = .FALSE.
END DO
IF( ionode ) WRITE(*,*) 'AUTOPILOT SET'
10 CONTINUE
END SUBROUTINE card_autopilot
!-----------------------------------------------------------------------
SUBROUTINE add_rule( input_line )
!---------------------------------------------------------------------
!! ADD RULE
!
USE io_global, ONLY: ionode
!
IMPLICIT NONE
!
CHARACTER(LEN=256) :: input_line
!
! ... local variables
!
integer :: i, linelen
integer :: eq1_pos, eq2_pos, plus_pos, colon_pos
CHARACTER(LEN=32) :: var_label
CHARACTER(LEN=32) :: value_str
INTEGER :: on_step, now_step, plus_step
integer :: ios
integer :: event
LOGICAL, EXTERNAL :: matches
LOGICAL :: new_event
! this is a temporary local variable
event = n_events
! important for parsing
i=0
eq1_pos = 0
eq2_pos = 0
plus_pos = 0
colon_pos = 0
linelen=LEN_TRIM( input_line )
! Attempt to get PLUS SYMBOL
i = 1
do while( (plus_pos .eq. 0) .and. (i <= linelen) )
i = i + 1
if(input_line( i : i ) .eq. '+') then
plus_pos = i
endif
end do
! Attempt to get a colon
i = 1
do while( (colon_pos .eq. 0) .and. (i <= linelen) )
i = i + 1
if(input_line( i : i ) .eq. ':') then
colon_pos = i
endif
end do
! Attempt to get first equals
i = 1
do while( (eq1_pos .eq. 0) .and. (i <= linelen) )
i = i + 1
if(input_line( i : i ) .eq. '=') then
eq1_pos = i
endif
end do
! Attempt to get second equals
if ((eq1_pos .ne. 0) .and. (eq1_pos < colon_pos)) then
i = colon_pos + 1
do while( (eq2_pos .eq. 0) .and. (i <= linelen) )
i = i + 1
if(input_line( i : i ) .eq. '=') then
eq2_pos = i
endif
end do
endif
! Complain if there is a bad parse
if (colon_pos .eq. 0) then
call auto_error( ' AutoPilot ','Missing colon separator')
go to 20
endif
if (eq1_pos .eq. 0) then
call auto_error( ' AutoPilot ','Missing equals sign')
go to 20
endif
if ((plus_pos > 0) .and. (eq1_pos < colon_pos)) then
call auto_error( ' AutoPilot ','equals and plus found prior to colon')
go to 20
endif
!================================================================================
! Detect events
IF ( (pilot_type .eq. 'MANUAL') .or. (pilot_type .eq. 'PILOT') ) THEN
!-------------------------------------------
!Do the equivalent of the following:
!READ(input_line, *) now_label, plus_label1, plus_step, colon_label, var_label, eq_label2, value_str
!Format:
! [NOW [+ plus_step] :] var_label = value_str
!-------------------------------------------
! if there is a NOW, get it and try to get plus and plus_step
IF ( matches( 'NOW', input_line ) ) THEN
! Attempt to get PLUS_STEP
plus_step = 0
! if all is non-trivial, read a PLUS_STEP
if ((plus_pos > 0) .and. (colon_pos > plus_pos)) then
! assume a number lies between
read(input_line(plus_pos+1:colon_pos-1),*,iostat=ios) plus_step
if(ios .ne. 0) then
CALL auto_error( ' AutoPilot ','Value Type Mismatch on NOW line!')
go to 20
end if
end if
! set NOW event
now_step = current_nfi + plus_step
ELSE
! set NOW event
now_step = current_nfi
END IF
!================================================================================
! set event
!
! Heres where it get interesting
! We may have a new event , or not! :)
IF ((event-1) .gt. 0) THEN
IF ( now_step .lt. event_step(event-1)) THEN
IF( ionode ) write(*,*) ' AutoPilot: current input_line', input_line
CALL auto_error( ' AutoPilot ','Dynamic Rule Event Out of Order!')
go to 20
ENDIF
ENDIF
IF (event .eq. 0) THEN
new_event = .true.
ELSEIF ( now_step .gt. event_step(event)) THEN
new_event = .true.
ELSE
new_event = .false.
ENDIF
IF ( new_event ) THEN
! new event
event = event + 1
IF (event > max_event_step) THEN
IF( ionode ) write(*,*) ' AutoPilot: current input_line', input_line
CALL auto_error( ' AutoPilot ','Maximum Number of Dynamic Rule Event Exceeded!')
go to 20
ENDIF
event_step(event) = now_step
n_events = event
ENDIF
ELSE IF ( matches( 'ON_STEP', input_line ) ) THEN
! Assuming pilot_type is AUTO
! if it isnt and ON_STEP these rules wont take anyway
!-------------------------------------------
!Do the equivalent of the following:
!READ(input_line, *) on_step_label, eq_label1, on_step, colon_label, var_label, eq_label2, value_str
!Format:
! ON_STEP = on_step : var_label = value_str
!-------------------------------------------
IF( ionode ) write(*,*) 'ADD_RULE: POWER STEERING'
! Attempt to get ON_STEP
on_step = MAX_INT
! if all is non-trivial, read a PLUS_STEP
if ((eq1_pos > 0) .and. (colon_pos > eq1_pos)) then
! assume a number lies between
read(input_line(eq1_pos+1:colon_pos-1),*,iostat=ios) on_step
if(ios .ne. 0) then
CALL auto_error( ' AutoPilot ','Value Type Mismatch on ON_STEP line!')
go to 20
end if
end if
!================================================================================
! set event
!
! Heres where it get interesting
! We may have a new event , or not! :)
IF ( ((event-1) .gt. 0)) THEN
IF ( on_step .lt. event_step(event-1)) THEN
IF( ionode ) write(*,*) ' AutoPilot: current input_line', input_line
CALL auto_error( ' AutoPilot ','Dynamic Rule Event Out of Order!')
go to 20
ENDIF
ENDIF
IF (event .eq. 0) THEN
new_event = .true.
ELSEIF (on_step .gt. event_step(event)) THEN
new_event = .true.
ELSE
new_event = .false.
ENDIF
IF (new_event) THEN
! new event
event = event + 1
IF (event > max_event_step) THEN
IF( ionode ) write(*,*) ' AutoPilot: current input_line', input_line
CALL auto_error( ' AutoPilot ','Maximum Number of Dynamic Rule Event Exceeded!')
go to 20
ENDIF
event_step(event) = on_step
n_events = event
ENDIF
END IF ! Event Detection Complete
!-------------------------------------
! Now look for a label and a value
!-------------------------------------
if (eq2_pos .eq. 0) then
var_label = input_line(colon_pos+1: eq1_pos-1)
read( input_line(eq1_pos+1:linelen), *, iostat=ios) value_str
if(ios .ne. 0) then
CALL auto_error( ' AutoPilot ','Value Type Mismatch on NOW_STEP line!')
go to 20
end if
else
var_label = input_line(colon_pos+1: eq2_pos-1)
read( input_line(eq2_pos+1:linelen), *, iostat=ios) value_str
if(ios .ne. 0) then
CALL auto_error( ' AutoPilot ','Value Type Mismatch on ON_STEP line!')
go to 20
end if
endif
! The Assignment must lie outside the new event scope since
! there can exists more than one rule per event
IF ( (n_rules+1) .gt. max_rules) THEN
IF( ionode ) write(*,*) ' AutoPilot: current n_rules', n_rules
CALL auto_error( ' AutoPilot ', ' invalid number of rules ')
go to 20
END IF
call assign_rule(event, var_label, value_str)
!IF( ionode ) write(*,*) ' Number of rules: ', n_rules
FLUSH(6)
20 CONTINUE
END SUBROUTINE add_rule
!-----------------------------------------------------------------------
SUBROUTINE assign_rule(event, var, value)
!---------------------------------------------------------------------
!! ASSIGN RULE
!
USE io_global, ONLY: ionode
!
IMPLICIT NONE
!
INTEGER :: event
CHARACTER(LEN=32) :: var
CHARACTER(LEN=32) :: value
!
! ... local variables
!
INTEGER :: i, varlen
INTEGER :: int_value
LOGICAL :: logical_value
REAL :: real_value
REAL(DP) :: realDP_value
LOGICAL :: assigned
LOGICAL, EXTERNAL :: matches
CHARACTER(LEN=1), EXTERNAL :: capital
var = TRIM(var)
varlen = LEN_TRIM(var)
DO i = 1, varlen
var( i : i ) = capital( var( i : i ) )
END DO
IF( ionode ) write(*,'(" Reading rule: ",A20,A20)' ) var, value
assigned = .TRUE.
IF ( matches( "ISAVE", var ) ) THEN
read(value, *) int_value
rule_isave(event) = int_value
event_isave(event) = .true.
ELSEIF ( matches( "IPRINT", var ) ) THEN
read(value, *) int_value
rule_iprint(event) = int_value
event_iprint(event) = .true.
ELSEIF ( matches( "TPRINT", var ) ) THEN
read(value, *) logical_value
rule_tprint(event) = logical_value
event_tprint(event) = .true.
ELSEIF ( matches( "DT", var ) ) THEN
read(value, *) real_value
rule_dt(event) = real_value
event_dt(event) = .true.
!IF( ionode ) write(*,*) 'RULE_DT', rule_dt(event), 'EVENT', event
ELSEIF ( matches( "EMASS", var ) ) THEN
read(value, *) realDP_value
rule_emass(event) = realDP_value
event_emass(event) = .true.
ELSEIF ( matches( "ELECTRON_DYNAMICS", var ) ) THEN
read(value, *) value
if ((value .ne. 'SD') .and. (value .ne. 'VERLET') .and. (value .ne. 'DAMP') &
.and. (value .ne. 'NONE') .and. (value .ne. 'CG') ) then
call auto_error(' autopilot ',' unknown electron_dynamics '//trim(value) )
assigned = .FALSE.
go to 40
endif
rule_electron_dynamics(event) = value
event_electron_dynamics(event) = .true.
ELSEIF ( matches( "ELECTRON_DAMPING", var ) ) THEN
read(value, *) realDP_value
rule_electron_damping(event) = realDP_value
event_electron_damping(event) = .true.
ELSEIF ( matches( "ION_DYNAMICS", var ) ) THEN
read(value, *) value
if ((value .ne. 'SD') .and. (value .ne. 'VERLET') .and. (value .ne. 'DAMP') .and. (value .ne. 'NONE')) then
call auto_error(' autopilot ',' unknown ion_dynamics '//trim(value) )
assigned = .FALSE.
go to 40
endif
rule_ion_dynamics(event) = value
event_ion_dynamics(event) = .true.
ELSEIF ( matches( "ORTHOGONALIZATION", var) ) THEN
read(value, *) value
if ( (value .ne. 'ORTHO') .and. (value .ne. 'GRAM-SCHMIDT') ) then
call auto_error(' autopilot ',' unknown orthogonalization '//trim(value) )
assigned = .false.
go to 40
endif
rule_electron_orthogonalization(event) = value
event_electron_orthogonalization(event) = .true.
ELSEIF ( matches( "ION_DAMPING", var ) ) THEN
read(value, *) realDP_value
rule_ion_damping(event) = realDP_value
event_ion_damping(event) = .true.
ELSEIF ( matches( "ION_TEMPERATURE", var ) ) THEN
read(value, *) value
if ((value .ne. 'NOSE') .and. (value .ne. 'NOT_CONTROLLED') .and. (value .ne. 'RESCALING')) then
call auto_error(' autopilot ',' unknown ion_temperature '//trim(value) )
assigned = .FALSE.
go to 40
endif
rule_ion_temperature(event) = value
event_ion_temperature(event) = .true.
ELSEIF ( matches( "TEMPW", var ) ) THEN
read(value, *) realDP_value
rule_tempw(event) = realDP_value
event_tempw(event) = .true.
ELSEIF ( matches( "NHPCL", var ) ) THEN
read(value, *) int_value
rule_nhpcl(event) = int_value
event_nhpcl(event) = .true.
ELSEIF ( matches( "FNOSEP", var ) ) THEN
read(value, *) realDP_value
rule_fnosep(event) = realDP_value
event_fnosep(event) = .true.
ELSE
CALL auto_error( 'autopilot', ' ASSIGN_RULE: FAILED '//trim(var)//' '//trim(value) )
END IF
40 if (assigned) then
n_rules = n_rules + 1
else
IF( ionode ) write(*,*) ' Autopilot: Rule Assignment Failure '
CALL auto_error( 'autopilot', ' ASSIGN_RULE: FAILED '//trim(var)//' '//trim(value) )
endif
END SUBROUTINE assign_rule
!-----------------------------------------------------------------------
SUBROUTINE parse_mailbox ()
!---------------------------------------------------------------------
!! Read the mailbox with a mailbox parser:
!
!! * if it starts with ON_STEP, then apply to event table etc;
!! * if not the try to establish that its a variable to set right now.
!
USE io_global, ONLY: ionode
!
IMPLICIT NONE
!
INTEGER :: i
CHARACTER(LEN=256) :: input_line
LOGICAL :: tend
CHARACTER(LEN=1), EXTERNAL :: capital
LOGICAL, EXTERNAL :: matches
! we can use this parser routine, since parse_unit=pilot_unit
CALL read_line( input_line, end_of_file=tend )
IF (tend) GO TO 50
DO i = 1, LEN_TRIM( input_line )
input_line( i : i ) = capital( input_line( i : i ) )
END DO
! This conditional implements the PAUSE feature calling init_auto_pilot,
! will reset this modules global PAUSE_P variable to FALSE
IF ( matches( "PAUSE", input_line ) .or. &
matches( "SLEEP", input_line ) .or. &
matches( "HOVER", input_line ) .or. &
matches( "WAIT", input_line ) .or. &
matches( "HOLD", input_line ) ) THEN
IF( ionode ) write(*,*) 'SLEEPING'
IF( ionode ) write(*,*) 'INPUT_LINE=', input_line
pause_p = .TRUE.
! now you can pass continue to resume
ELSE IF (matches( "CONTINUE", input_line ) .or. &
matches( "RESUME", input_line ) ) THEN
IF( ionode ) write(*,*) 'RUNNING'
IF( ionode ) write(*,*) 'INPUT_LINE=', input_line
pause_p = .FALSE.
! Now just quit this subroutine
ELSE
! Also, We didnt see a PAUSE cmd!
pause_p = .FALSE.
! now lets detect the mode for card_autopilot
! even though this line will be passed to it the first time
IF ( matches( "AUTOPILOT", TRIM(input_line) ) ) THEN
IF( ionode ) WRITE(*,*) ' New autopilot course detected'
pilot_type ='AUTO'
ELSE IF (matches( "PILOT", TRIM(input_line) ) ) THEN
IF( ionode ) WRITE(*,*) ' Relative pilot course correction detected'
pilot_type ='PILOT'
ELSE IF (matches( "NOW", TRIM(input_line) ) ) THEN
IF( ionode ) WRITE(*,*) ' Manual piloting detected'
pilot_type ='MANUAL'
ELSE
! Well lets just pause since this guys is throwing trash
IF( ionode ) WRITE(*,*) ' Mailbox contents not understood: pausing'
pause_p = .TRUE.
ENDIF
END IF
IF (pause_p) GO TO 50
! ok if one adds a rule during steering`
! event table must be cleared (from steer point) forward
!
! Every nodes gets this (and the call to card_autopilot
! which calls add_rule, which calls assign_rule, etc
! In this way we sync the event table
! Then we shouldn't have to sync employ_rules variable
! changes, or their subroutine side effects (like ions_nose_init)
CALL init_autopilot()
CALL card_autopilot( input_line )
50 CONTINUE
end subroutine parse_mailbox
END MODULE autopilot
Reference in New Issue View Git Blame Copy Permalink