fixed a few overflows in atomic (atomic/atomic_paw.f90, atomic/partial_wave_expansion.f90)
fixed a few wrong format specifiers (Modules/write_upf_v2.f90)
try to make error messages from self-consistency in atomic easier to interpret and fix
(atomic/ascheqps.f90)
added a mechanism to save the configuration used to generate it in the INFO section of
a pseudopotential.
LP
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4836 c92efa57-630b-4861-b058-cf58834340f0
flag reporting whether only half G-vector sphere is present (not
actually used in q-e but it may be useful for other codes). make.depend
updated
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4819 c92efa57-630b-4861-b058-cf58834340f0
version number added to the file, so that we have a way to deal with
incompatible changes in the future; miscellaneous tags put into a
CONTROL files; field IONS made uniform with the rest of the file;
rationalization of the names of tag STARTING_MAG (now MAGNETIZATION_INIT),
uniform tag structure (as for IONS above). Some of these changes are
incompatible with the previous format, but it will still possible to
read files from previous versions, though. Only third-party software
reading the qexml format may be affected, but it is unlikely that there
is any (in addition to those by AF)
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4774 c92efa57-630b-4861-b058-cf58834340f0
LP
UPF file format updated completely, UPFv2 introduced:
* ld1.x can still produce old format, with the switch upf_v1_format=.true. in inputp
this is disabled by default, but we can discuss if it should be the opposite.
* pw.x cp.x and all utilities should notice no difference
* some utilities in upftools still need to be updated, anyway conversion UPFv1 to UPFv2
is very easy, so this should be no big issue
* starting from now to produce an UPF file you need to fill the pseudo_upf derivedd type
and feed it to write_upf woutine in upf_module (Modules/upf.f90)
* extensive use of iotk
I have tried to make the new format as self contained as possible, e.g. there should be
minimal need for post-processing after the data is read, no more reconstruction of known
quantities, and no more odd syntax to save negligible quantity of space. Also the human
readable section is a bit richer, all the rest is more machine readable.
I hope this will not cause any throuble, and tried really hard to, all examples and all
tests works as fine as before and gives (what really looks like) the same results.
Other changes that I needed to make:
* radial grids are now allocatable, they management is a bit less of a hack too
* paw and uspp augmentation are stored in the same place
* paw print total all-electron energy if all atoms are paw, not very useful, but nice
* most of the pseudopotential-writing reading files have been renamed to some more
logical name, I spare you the list. E.g. read_oldpseudo -> read_pseudo_rrkj3
* paw_t derived type was only used in atomic, so I have put it there (as the pseudo_type
module take ages to recompile it was awkward to leave it there).
PAW tests inserted in test/ there are 6 of them, as a consequence I have also put 5 paw
pseudopotentials in the pseudo/ directory.
I will update the PAW scf examples soon, by deleting them (as running a pw with a PAW
pseudopotential requires no option at all). PAW generation examples should be updated.
A lot of small bugfixes here & there mostly uninitialized variables or unallocated
pointers used as subrotuine arguments.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4769 c92efa57-630b-4861-b058-cf58834340f0
reconstruction. Most significant changes:
- Added variable 'lgipaw_reconstruction' (also in namelist 'inputp')
- Made 'lpaw' optional in 'write_pseudo_paw()' (in 'write_upf.f90')
- New file/routine 'calculate_gipaw_orbitals()'
apsi
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4750 c92efa57-630b-4861-b058-cf58834340f0
Modules/error_handler.f90 . Not really an elegant solution, since
the module in error_handler is never used and subroutine "errore"
is not in the module, but better than it used to be. All makefiles
and make.depend updated (fixes yesterday's linking error as well).
Minor changes here and there as well.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4591 c92efa57-630b-4861-b058-cf58834340f0
Symmetrization of becsum simplified a bit introducing mapping to "triangular" composite index.
Read upf now uses default (*) format for paw part.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4529 c92efa57-630b-4861-b058-cf58834340f0
Mods: removed read_paw module and .PAW temporary format support. Makefiles and
make.depend updated accordingly.
Fixes in ld1: test of upf types was not working anymore (same as reason as CP),
added deallocation of pawsetup. As testing of PAW without generation may not
work yet I have put a big error for it.
Other: simpson_cp90 was pretending to be simpson in error messages
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4461 c92efa57-630b-4861-b058-cf58834340f0
routines, actually results should be the same, and execution time should be
a lot shorter.
* each atom type now integrated to a different max(l)
* max(l) tuned in order to exclude the non local channel of pseudo-
potential, if it's empty
* several implementation optimization
* all occurences of ALLOCATABLE changed to POINTER inside derived types
* added original Bloechl shape for augmentation charge, at the moment it
is not useful but if someone wants to implement analylitical correction
to overlaps...
* PAW now uses UPF format, the format is still being tested: it will
probably change a bit in the near future
* as a consequence radial grids are now pointed from upf type and can be
updated directly in read_upf, upf_to_internal don't have to set the grid
anymore (at the moment only for pseudos read from upf files)
* added a non-destructive check for abs(zeta)>1. in vxc_t
LP
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4449 c92efa57-630b-4861-b058-cf58834340f0
like in it was in reduce sub of PW. This is to avoid large temporary
array allocations in module mp.f90 (mp.f90 calls subs in mp_base.f90).
On the other hands mp.f90 provide the general interfaces for different
kind of data and data size checking.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4441 c92efa57-630b-4861-b058-cf58834340f0
nymore). Other things working: parallel, gamma-only.
Files vxc_t, exc_t and vxcgc moved from atomic to Modules (to prevent cyclic dependencies).
Other random fixes: a kind in init_vloc, a call to infomsg in ./PH/add_for_charges.f90.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4358 c92efa57-630b-4861-b058-cf58834340f0
This means that a lot of routines have been modified and a few files have
been added. During the year several people have contributed to this code,
mainly Guido Fratesi, Ricardo Mazzarello, Stefano de Gironcoli, Andrea Dal
Corso and me (Lorenzo Paulatto).
A brief report of modified or added files follows, further down you will
find a loger report of modifications that was necessary to merge develop_PAW
branch with the current CVS version.
Current version is not 100% functional, but it doesn't brake anything else and
can be used to generate and test PAW pseudopotential.
*************************************
*** Brief report of modifications ***
*************************************
Modified files:
PW/clean_pw.f90
PW/electrons.f90
PW/print_clock_pw.f90
PW/hinit0.f90
PW/potinit.f90
PW/newd.f90
PW/summary.f90
PW/setup.f90
PW/read_pseudo.f90
PW/init_us_1.f90
PW/init_run.f90
PW/mix_rho.f90
atomic/atomic_paw.f90
atomic/write_paw_recon.f90
atomic/ld1_writeout.f90
atomic/write_resultsps.f90
atomic/ld1inc.f90
atomic/ld1_readin.f90
atomic/gener_pseudo.f90
atomic/parameters.f900
atomic/run_pseudo.f900
atomic/set_rho_core.f90
atomic/pseudovloc.f90
Modules/read_upf.f90
Modules/uspp.f90
Modules/pseudo_types.f90
Modules/parameters.f90
Added files:
PW/grid_paw_routines.f90
PW/rad_paw_routines.f90
Modules/grid_paw_variables.f90
Modules/read_paw.f90
Added files that will be removed:
PW/rad_paw_trash.f90
PW/paw_xc.f90
Examples:
examples/PAWexample contains a full test of PAW pseudopotential
for Oxygen. The test consist in these tasks:
- 2 norm conserving, 2 US and 4 PAW pseudopotentials are
generated and tested in ld1
- pw test for an isolated O atom at different cutoffs
- pw test for an O2 molecule at different O-O distance
please read examples/PAWexample/README for (a few) details.
NOTES:
1. new modifications to atomic_paw (and related) from ADC have been rolled
back, as they were breaking a lot of things, I will reintroduce them
later when I am sure that everything works properly.
2. the files PW/paw_xc.f90 and Modules/rad_paw_trash.f90 will be removed in
the next few weeks.
TODO:
1. use new ld1 XC code as much as possible, and remove legacy XC routines
from rad_paw_routines
2. full self-consistency with radial energies
3. make new Harris-Foulkes estimate paw-aware
4. provide some kind error estimate
5. FORCES and stress!! (require symmetrization of becsums)
6. cleanup
************************
*** merge of PW code ***
************************
Versions notation:
OLD=version from 2 years ago used as reference to generate the patches
NEW=CURRENT=current trunk version
PAW=current develop_PAW version
Note: pseudo-potential input and allocation routines changed
a lot in the last years, this is a diagram:
OLD:PW/readin ~~> PAW:PW/read_pseudo --> disappears
pops out --> PAW:PW/readin ~~> NEW:PW/read_pseudo
added files:
Modules/read_paw.f90 (contains module read_paw_module with subroutines
paw_io nullify_pseudo_paw, allocate_pseudo_paw and
deallocate_pseudo_paw previously in removed file
Modules/readpseudo.f90. Also contains module
paw_to_internal with subroutine set_pseudo_paw,
previously in upf_to_internal.f90)
PW/paw_xc.f90 (contains OLD=PAW xc and gcxc routines as adapting paw
grid code to use new routines was very error prone and
quite worthless, as it has to be removed anyway)
Conflicts reported by CVS during merge:
DONE */Makefiles (all replaced with new, redone by hand)
DONE flib/functionals.f90 (nothing to do)
DONE Modules/functionals.f90 (RNV == replaced with NEW version)
DONE Modules/atom.f90 (trivial: duped rgrid)
DONE Modules/autopilot.f90 (trivial)
DONE Modules/bfgs_module.f90 (RNV)
DONE Modules/cell_base.f90 (RNV)
DONE Modules/check_stop.f90 (RNV)
DONE Modules/constants.f90 (RNV)
DONE Modules/constraints_module.f90 (RNV)
DONE Modules/energies.f90 (RNV)
DONE Modules/input_parameters.f90 (RNV)
DONE Modules/ions_base.f90 (RNV, has 3 new subs)
DONE Modules/ions_nose.f90 (RNV)
DONE Modules/parameters.f90 (actually RNV)
DONE Modules/path_base.f90 (RNV)
DONE Modules/path_opt_routines.f90 (RNV)
DONE Modules/path_reparametrisation.f90 (RNV)
DONE Modules/path_variables.f90 (RNV)
DONE Modules/pseudo_types.f90 (cleaned double def of paw_t)
DONE Modules/read_cards.f90 (RNV)
DONE Modules/read_namelists.f90 (checked and RNV)
DONE Modules/uspp.f90 (trivial)
DONE Modules/xml_io_base.f90 (RNV)
DONE PW/read_pseudo.f90 (merged by hand with PAW PW/readin)
DONE PW/bp_calc_btq.f90 (trivial)
DONE PW/c_bands.f90 (actually RNV)
DONE PW/ccgdiagg.f90 (RNV)
DONE PW/cegterg.f90 (RNV)
DONE PW/cft3s.f90 (RNV)
DONE PW/cinitcgg.f90 (RNV)
DONE PW/c_phase_field.f90 (RNV)
DONE PW/divide_et_impera.f90 (nothing to do?)
DONE PW/exx.f90 (RNV)
DONE PW/hinit0.f90 (easy)
DONE PW/h_psi.f90 (RNV)
DONE PW/init_run.f90 (easy)
DONE PW/kpoint_grid.f90 (nothing to do?)
DONE PW/newd.f90 (required mod in newd_paw_grid, CHECK!!)
DONE PW/openfil.f90 (actually RNV)
DONE PW/paw.f90 (actually RNV)
DONE PW/punch.f90 (RNV)
DONE PW/pwscf.f90 (quite RNV)
DONE PW/set_kup_and_kdw.f90 (RNV)
DONE PW/setup.f90 (RNV + 2 line merged by hand)
DONE PW/sgama.f9 (actually RNV)
DONE PW/sgam_at_mag.f90 (actually RNV)
DONE PW/stop_run.f90 (actually RNV)
DONE PW/stres_gradcorr.f90 (actually RNV)
DONE PW/symrho_mag.f90 (nothing to do)
DONE PW/v_of_rho.f90 (RNV)
DONE PW/compute_fes_grads.f90 (RNV)
DONE PW/gradcorr.f90 (RNV)
DONE PW/input.f90 (RNV)
DONE PW/pw_restart.f90 (RNV)
DONE PW/read_ncpp.f90 (actually RNV)
DONE PW/summary.f90 (RNV + inserted new PP type)
DONE PW/wfcinit.f90 (RNV)
the hard ones:
DONE PW/electrons.f90 (adapted code to new syntaxes, a lot of cleanup, removed
some PAW junk that can be readded later, removed parts
that were applyed twice, or had been removed in trunk,
the rhog allocations and usage may need fixes)
DONE PW/mix_rho.f90 (merged tauk and paw additions, a bit of cleanup and smarter
variables names)
DONE PW/init_us_1.f90 (qtot redefined with "triangular" index nb,mb-->ijv)
modified for compiling:
Modules/io_files.f90 (depatched)
PW/pwcom.f90 (depatched)
Modules/parameters.f90 (temporary readded cp_lmax = lmaxx+1)
PW/newd.f90 (merge was wrong, redone mostly by hand)
PW/read_ncpp.f90 (depatched)
PW/read_pseudo (small fixes)
PW/sgam_at_mag.f90 (depatched)
PW/sgama.f90 (depatched)
PW/stres_gradcorr.f90 (depatched)
modified for running:
PW/clean_pw.f90 (added call to deallocate_paw_internals)
Modifications to PAW routines:
1. compute_onecenter_charges and compute_onecenter_charges modified to
comply with new structure of v_xc (in v_of_rho.f90), requiring new
g-space densities to be saved and computed --> using old xc routines
as this code will be removed.
2. qrad size has changed, prad and ptrad had to be changed accordingly.
3. several minor modifications to use new radial grid structure.
4. infomsg arguments changed, very funny bug followed.
5. added new routine deallocate_paw_internals, called by PW/clean_pw.f90
required to run pp.x with more than one q-point(and good programming
practice)
*************************
*** merge of LD1 code ***
*************************
2nd try: atomic code replaced with current version, then merge by hand
the files that are used by paw subsystem:
* atomic_paw.f90 (replaced with most recent version from develop_PAW
routine us2paw and paw2us taken from newer trunk
version, a lot of minor changes.)
* gener_pseudo.f90 (fixes)
* ld1inc.f90 (PAW variables added)
* ld1_readin.f90 (PAW variables added, I am not sure if lpaw should go
in input or inputp namelist)
* ld1_writeout.f90 (it was only necessary to add a few lines)
* pseudovloc.f90 (nothing to do)
* run_pseudo.f90 (almost nothing to do)
* set_rho_core.f90 (readded a few lines for lnc2paw)
* write_paw_recon.f90 (nothing to do)
* write_resultsps.f90 (nothing to do: trunk version is more
PAW-aware than PAW version)
Main problems were found in subroutines run_pseudo and gen_pseudo,
a little code had to be rewritten to comply with new variable names
and fix with merge.
TODO: fix atomic_paw routines to use minimal allocated arrays insetad
of ndmx sized ones; try to use the pawet as much as possible. Remove
test lines and other garbage. Find a fix for PAW2.
The first week of september Andrea Dal Corso uploaded a few modifications to
the atomic_paw routines. I had to rollback them as the structure of atomic_paw
has changed a lot and reimplementing them is probably easier and definitely
safer than fixing everything. I will do it soon, I swear!
LP
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4257 c92efa57-630b-4861-b058-cf58834340f0
- correct an unquoted string (iosys) in PW/input.f90:483
(this was the cause of tonight compilation failere)
- correct a few incorrect format strings
- make more use of the constants module and thus
provide more consistent units. NOTE, this has some
numerical changes in the outputs, as in some places
rather low precision and inconsistent numbers were
used for unit conversion.
- convert all(?) single precision constants to double
using the attached little perl program.
exceptions: efermi.f90 (as it is supposed to be rewritten
anyways), plotbands.f90 (it uses single precision everywhere,
which may result in saving a significant amount of memory,
so i converted the two double precision constants to single).
Unused routine 'set_fft_grid' removed
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@3602 c92efa57-630b-4861-b058-cf58834340f0
- disable locales via use of LC_ALL=C in all shell scripts
(which will hopefully make sorted lists more consistent
between people running with different locales).
- remove redundant files from PW, NMR_new, VdW, VIB;
rename subroutines if their functionality is noI
unchanged from the original source it was taken from.
- corresponding updates to Makefiles and dependencies.
- whitespace cleanups (eleminate remaining tabs).
- a few more float->DBLE
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@3596 c92efa57-630b-4861-b058-cf58834340f0
make.depend are now in the CVS and shouldn't be updated unless
needed. Configure no longer runs makedeps.sh. Type 'make depend'
to regenerate dependencies.
Remove all */make.depend files before updating!
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@3409 c92efa57-630b-4861-b058-cf58834340f0
ccavazzoni