to Modules/environment.f90 and generalized to PW and other codes.
PW/startup.f90 is kept as a wraper for now. The initial message in CP
looks now like the one in PW (please check if it satisfactory). The
compilation date has disappeared from info printed by CP: was it useful?
Makefiles and make.depends updated. ld1 does not depend any longer upon
files in PW/ . Miscellaneous cleanup.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@6111 c92efa57-630b-4861-b058-cf58834340f0
images in a cluster calculation. Still to be tested in parallel, it
has been tested for Gamma vs 0 0 0 and for nspin=1 and 2. Forces seem
to be ok. In the few cases considere there is no significant increase
of workload with respect to the periodic calculation.
plot_io.f90 moved from PP to flib because it may be needed
in PW/martyna_tuckeman.f90 for debugging and in this way circular
references are avoided. It only USE low-level modules like io_global,
kinds, and constants so it should be ok.
Module ws_base.f90 added in Modules. It deals with basic operations
associated to Wigner-Seitz cell. The implementation should be general;
it has been tested for SC and FCC only.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@5911 c92efa57-630b-4861-b058-cf58834340f0
Modules/vxccg.f90 split into atomic/vxcgc.f90 and flib/radial_gradients.f90
Modules/metagga.f90 moved to flib/metagga.f90
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@5884 c92efa57-630b-4861-b058-cf58834340f0
modules is provided by the Makefile in each subdirectory, rather than
by make.sys. No big advantage but neater solution than before
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@5737 c92efa57-630b-4861-b058-cf58834340f0
name (remember tha some machines like Mac OSX have case-insensitive file
systems! ee == EE) b) some linkers require an explicit presence of all
modules in the list of files to be linked
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@5001 c92efa57-630b-4861-b058-cf58834340f0
LP
UPF file format updated completely, UPFv2 introduced:
* ld1.x can still produce old format, with the switch upf_v1_format=.true. in inputp
this is disabled by default, but we can discuss if it should be the opposite.
* pw.x cp.x and all utilities should notice no difference
* some utilities in upftools still need to be updated, anyway conversion UPFv1 to UPFv2
is very easy, so this should be no big issue
* starting from now to produce an UPF file you need to fill the pseudo_upf derivedd type
and feed it to write_upf woutine in upf_module (Modules/upf.f90)
* extensive use of iotk
I have tried to make the new format as self contained as possible, e.g. there should be
minimal need for post-processing after the data is read, no more reconstruction of known
quantities, and no more odd syntax to save negligible quantity of space. Also the human
readable section is a bit richer, all the rest is more machine readable.
I hope this will not cause any throuble, and tried really hard to, all examples and all
tests works as fine as before and gives (what really looks like) the same results.
Other changes that I needed to make:
* radial grids are now allocatable, they management is a bit less of a hack too
* paw and uspp augmentation are stored in the same place
* paw print total all-electron energy if all atoms are paw, not very useful, but nice
* most of the pseudopotential-writing reading files have been renamed to some more
logical name, I spare you the list. E.g. read_oldpseudo -> read_pseudo_rrkj3
* paw_t derived type was only used in atomic, so I have put it there (as the pseudo_type
module take ages to recompile it was awkward to leave it there).
PAW tests inserted in test/ there are 6 of them, as a consequence I have also put 5 paw
pseudopotentials in the pseudo/ directory.
I will update the PAW scf examples soon, by deleting them (as running a pw with a PAW
pseudopotential requires no option at all). PAW generation examples should be updated.
A lot of small bugfixes here & there mostly uninitialized variables or unallocated
pointers used as subrotuine arguments.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4769 c92efa57-630b-4861-b058-cf58834340f0
Modules/error_handler.f90 . Not really an elegant solution, since
the module in error_handler is never used and subroutine "errore"
is not in the module, but better than it used to be. All makefiles
and make.depend updated (fixes yesterday's linking error as well).
Minor changes here and there as well.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4591 c92efa57-630b-4861-b058-cf58834340f0
Mods: removed read_paw module and .PAW temporary format support. Makefiles and
make.depend updated accordingly.
Fixes in ld1: test of upf types was not working anymore (same as reason as CP),
added deallocation of pawsetup. As testing of PAW without generation may not
work yet I have put a big error for it.
Other: simpson_cp90 was pretending to be simpson in error messages
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4461 c92efa57-630b-4861-b058-cf58834340f0
like in it was in reduce sub of PW. This is to avoid large temporary
array allocations in module mp.f90 (mp.f90 calls subs in mp_base.f90).
On the other hands mp.f90 provide the general interfaces for different
kind of data and data size checking.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4441 c92efa57-630b-4861-b058-cf58834340f0
This is the first step of code cleanup. Actually nothing should change.
rad_paw_routines -> paw_onecenter (2 functions went to paw_init)
grid_paw_variables -> paw_variables (with some additions from rad_paw_routines)
grid_paw_routines -> paw_init (merged with 2 init functions from rad_paw)
Probably there are a few random fixes around.
Next step: remove ndmx and ntpx.
LP
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4422 c92efa57-630b-4861-b058-cf58834340f0
nymore). Other things working: parallel, gamma-only.
Files vxc_t, exc_t and vxcgc moved from atomic to Modules (to prevent cyclic dependencies).
Other random fixes: a kind in init_vloc, a call to infomsg in ./PH/add_for_charges.f90.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4358 c92efa57-630b-4861-b058-cf58834340f0
This means that a lot of routines have been modified and a few files have
been added. During the year several people have contributed to this code,
mainly Guido Fratesi, Ricardo Mazzarello, Stefano de Gironcoli, Andrea Dal
Corso and me (Lorenzo Paulatto).
A brief report of modified or added files follows, further down you will
find a loger report of modifications that was necessary to merge develop_PAW
branch with the current CVS version.
Current version is not 100% functional, but it doesn't brake anything else and
can be used to generate and test PAW pseudopotential.
*************************************
*** Brief report of modifications ***
*************************************
Modified files:
PW/clean_pw.f90
PW/electrons.f90
PW/print_clock_pw.f90
PW/hinit0.f90
PW/potinit.f90
PW/newd.f90
PW/summary.f90
PW/setup.f90
PW/read_pseudo.f90
PW/init_us_1.f90
PW/init_run.f90
PW/mix_rho.f90
atomic/atomic_paw.f90
atomic/write_paw_recon.f90
atomic/ld1_writeout.f90
atomic/write_resultsps.f90
atomic/ld1inc.f90
atomic/ld1_readin.f90
atomic/gener_pseudo.f90
atomic/parameters.f900
atomic/run_pseudo.f900
atomic/set_rho_core.f90
atomic/pseudovloc.f90
Modules/read_upf.f90
Modules/uspp.f90
Modules/pseudo_types.f90
Modules/parameters.f90
Added files:
PW/grid_paw_routines.f90
PW/rad_paw_routines.f90
Modules/grid_paw_variables.f90
Modules/read_paw.f90
Added files that will be removed:
PW/rad_paw_trash.f90
PW/paw_xc.f90
Examples:
examples/PAWexample contains a full test of PAW pseudopotential
for Oxygen. The test consist in these tasks:
- 2 norm conserving, 2 US and 4 PAW pseudopotentials are
generated and tested in ld1
- pw test for an isolated O atom at different cutoffs
- pw test for an O2 molecule at different O-O distance
please read examples/PAWexample/README for (a few) details.
NOTES:
1. new modifications to atomic_paw (and related) from ADC have been rolled
back, as they were breaking a lot of things, I will reintroduce them
later when I am sure that everything works properly.
2. the files PW/paw_xc.f90 and Modules/rad_paw_trash.f90 will be removed in
the next few weeks.
TODO:
1. use new ld1 XC code as much as possible, and remove legacy XC routines
from rad_paw_routines
2. full self-consistency with radial energies
3. make new Harris-Foulkes estimate paw-aware
4. provide some kind error estimate
5. FORCES and stress!! (require symmetrization of becsums)
6. cleanup
************************
*** merge of PW code ***
************************
Versions notation:
OLD=version from 2 years ago used as reference to generate the patches
NEW=CURRENT=current trunk version
PAW=current develop_PAW version
Note: pseudo-potential input and allocation routines changed
a lot in the last years, this is a diagram:
OLD:PW/readin ~~> PAW:PW/read_pseudo --> disappears
pops out --> PAW:PW/readin ~~> NEW:PW/read_pseudo
added files:
Modules/read_paw.f90 (contains module read_paw_module with subroutines
paw_io nullify_pseudo_paw, allocate_pseudo_paw and
deallocate_pseudo_paw previously in removed file
Modules/readpseudo.f90. Also contains module
paw_to_internal with subroutine set_pseudo_paw,
previously in upf_to_internal.f90)
PW/paw_xc.f90 (contains OLD=PAW xc and gcxc routines as adapting paw
grid code to use new routines was very error prone and
quite worthless, as it has to be removed anyway)
Conflicts reported by CVS during merge:
DONE */Makefiles (all replaced with new, redone by hand)
DONE flib/functionals.f90 (nothing to do)
DONE Modules/functionals.f90 (RNV == replaced with NEW version)
DONE Modules/atom.f90 (trivial: duped rgrid)
DONE Modules/autopilot.f90 (trivial)
DONE Modules/bfgs_module.f90 (RNV)
DONE Modules/cell_base.f90 (RNV)
DONE Modules/check_stop.f90 (RNV)
DONE Modules/constants.f90 (RNV)
DONE Modules/constraints_module.f90 (RNV)
DONE Modules/energies.f90 (RNV)
DONE Modules/input_parameters.f90 (RNV)
DONE Modules/ions_base.f90 (RNV, has 3 new subs)
DONE Modules/ions_nose.f90 (RNV)
DONE Modules/parameters.f90 (actually RNV)
DONE Modules/path_base.f90 (RNV)
DONE Modules/path_opt_routines.f90 (RNV)
DONE Modules/path_reparametrisation.f90 (RNV)
DONE Modules/path_variables.f90 (RNV)
DONE Modules/pseudo_types.f90 (cleaned double def of paw_t)
DONE Modules/read_cards.f90 (RNV)
DONE Modules/read_namelists.f90 (checked and RNV)
DONE Modules/uspp.f90 (trivial)
DONE Modules/xml_io_base.f90 (RNV)
DONE PW/read_pseudo.f90 (merged by hand with PAW PW/readin)
DONE PW/bp_calc_btq.f90 (trivial)
DONE PW/c_bands.f90 (actually RNV)
DONE PW/ccgdiagg.f90 (RNV)
DONE PW/cegterg.f90 (RNV)
DONE PW/cft3s.f90 (RNV)
DONE PW/cinitcgg.f90 (RNV)
DONE PW/c_phase_field.f90 (RNV)
DONE PW/divide_et_impera.f90 (nothing to do?)
DONE PW/exx.f90 (RNV)
DONE PW/hinit0.f90 (easy)
DONE PW/h_psi.f90 (RNV)
DONE PW/init_run.f90 (easy)
DONE PW/kpoint_grid.f90 (nothing to do?)
DONE PW/newd.f90 (required mod in newd_paw_grid, CHECK!!)
DONE PW/openfil.f90 (actually RNV)
DONE PW/paw.f90 (actually RNV)
DONE PW/punch.f90 (RNV)
DONE PW/pwscf.f90 (quite RNV)
DONE PW/set_kup_and_kdw.f90 (RNV)
DONE PW/setup.f90 (RNV + 2 line merged by hand)
DONE PW/sgama.f9 (actually RNV)
DONE PW/sgam_at_mag.f90 (actually RNV)
DONE PW/stop_run.f90 (actually RNV)
DONE PW/stres_gradcorr.f90 (actually RNV)
DONE PW/symrho_mag.f90 (nothing to do)
DONE PW/v_of_rho.f90 (RNV)
DONE PW/compute_fes_grads.f90 (RNV)
DONE PW/gradcorr.f90 (RNV)
DONE PW/input.f90 (RNV)
DONE PW/pw_restart.f90 (RNV)
DONE PW/read_ncpp.f90 (actually RNV)
DONE PW/summary.f90 (RNV + inserted new PP type)
DONE PW/wfcinit.f90 (RNV)
the hard ones:
DONE PW/electrons.f90 (adapted code to new syntaxes, a lot of cleanup, removed
some PAW junk that can be readded later, removed parts
that were applyed twice, or had been removed in trunk,
the rhog allocations and usage may need fixes)
DONE PW/mix_rho.f90 (merged tauk and paw additions, a bit of cleanup and smarter
variables names)
DONE PW/init_us_1.f90 (qtot redefined with "triangular" index nb,mb-->ijv)
modified for compiling:
Modules/io_files.f90 (depatched)
PW/pwcom.f90 (depatched)
Modules/parameters.f90 (temporary readded cp_lmax = lmaxx+1)
PW/newd.f90 (merge was wrong, redone mostly by hand)
PW/read_ncpp.f90 (depatched)
PW/read_pseudo (small fixes)
PW/sgam_at_mag.f90 (depatched)
PW/sgama.f90 (depatched)
PW/stres_gradcorr.f90 (depatched)
modified for running:
PW/clean_pw.f90 (added call to deallocate_paw_internals)
Modifications to PAW routines:
1. compute_onecenter_charges and compute_onecenter_charges modified to
comply with new structure of v_xc (in v_of_rho.f90), requiring new
g-space densities to be saved and computed --> using old xc routines
as this code will be removed.
2. qrad size has changed, prad and ptrad had to be changed accordingly.
3. several minor modifications to use new radial grid structure.
4. infomsg arguments changed, very funny bug followed.
5. added new routine deallocate_paw_internals, called by PW/clean_pw.f90
required to run pp.x with more than one q-point(and good programming
practice)
*************************
*** merge of LD1 code ***
*************************
2nd try: atomic code replaced with current version, then merge by hand
the files that are used by paw subsystem:
* atomic_paw.f90 (replaced with most recent version from develop_PAW
routine us2paw and paw2us taken from newer trunk
version, a lot of minor changes.)
* gener_pseudo.f90 (fixes)
* ld1inc.f90 (PAW variables added)
* ld1_readin.f90 (PAW variables added, I am not sure if lpaw should go
in input or inputp namelist)
* ld1_writeout.f90 (it was only necessary to add a few lines)
* pseudovloc.f90 (nothing to do)
* run_pseudo.f90 (almost nothing to do)
* set_rho_core.f90 (readded a few lines for lnc2paw)
* write_paw_recon.f90 (nothing to do)
* write_resultsps.f90 (nothing to do: trunk version is more
PAW-aware than PAW version)
Main problems were found in subroutines run_pseudo and gen_pseudo,
a little code had to be rewritten to comply with new variable names
and fix with merge.
TODO: fix atomic_paw routines to use minimal allocated arrays insetad
of ndmx sized ones; try to use the pawet as much as possible. Remove
test lines and other garbage. Find a fix for PAW2.
The first week of september Andrea Dal Corso uploaded a few modifications to
the atomic_paw routines. I had to rollback them as the structure of atomic_paw
has changed a lot and reimplementing them is probably easier and definitely
safer than fixing everything. I will do it soon, I swear!
LP
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@4257 c92efa57-630b-4861-b058-cf58834340f0
LD used instead of MPIF90 in Makefiles for loading. Since LD is used
anyway in iotk, it makes sense to use it. In some cases it may be
useful to have distinct options for compiling and for loading.
Minor cleanup in some routines
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@3976 c92efa57-630b-4861-b058-cf58834340f0
PAW-related stuff extracted and put into the paw module; various checks
moved to more appropriate places; initialization of obsolete variables
lloc and lmax moved elsewhere; variable zp moved to uspp_param.
All PP-reading subroutines (too many) read zp, not zv; zv is set later.
Summary for pseudopotentials unified and purged of printout of
obsolete/unused/unset variables.
PW/readin.f90 renamed to something more suggestive of what it does
(PW/read_pseudo.f90). Module PW/upf_to_internal.f90 moved to Modules/,
routine upf2internal removed from CPV/read_pseudo.f90.
Harmless error in berry phase + a few bad formats in GIPAW fixed.
Dependencies and Makefiles updated.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@3851 c92efa57-630b-4861-b058-cf58834340f0
libcp.a respectively), used to load the executables. This removes
the need to specify all needed objects in many different makefiles.
Works with 95, ifort, xlf. Please let me know if there are problems
with more exotic or lousy compilers.
A few minor things fixed as well.
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@3428 c92efa57-630b-4861-b058-cf58834340f0
representation of the small group of k. k points on the border
of the Brillouin zone of systems with non symmorphic space groups
are not dealt with. Spin-orbit case included.
Find_mode_sym extended to all the q points, with the same limitations as
the bands.
(still experimental).
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@3330 c92efa57-630b-4861-b058-cf58834340f0
- io_pot removed, replaced by read_rho, write_rho. It looks like it is
working but more testing is needed
- Makeifles updated
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@3072 c92efa57-630b-4861-b058-cf58834340f0
- further changes to support image parallelization in CP
- bug fix in XML save file for wave functions / charge density / pools .
In siple case and combinations of procs and polls now it seem to work.
More testing is required
git-svn-id: http://qeforge.qe-forge.org/svn/q-e/trunk/espresso@2963 c92efa57-630b-4861-b058-cf58834340f0
giannozz