with a fix
rotate CallInst operands, i.e. move callee to the back
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
llvm-svn: 101397
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
llvm-svn: 101364
code. It used to #include the enhanced disassembly
information for the targets it supported straight
out of lib/Target/{X86,ARM,...} but now it uses a
new interface provided by MCDisassembler, and (so
far) implemented by X86 and ARM.
Also removed hacky #define-controlled initialization
of targets in edis. If clients only want edis to
initialize a limited set of targets, they can set
--enable-targets on the configure command line.
llvm-svn: 101179
MachineBasicBlock::livein_iterator a const_iterator, because
clients shouldn't ever be using the iterator interface to
mutate the livein set.
llvm-svn: 101147
If we have this situation:
jCC L1
jmp L2
L1:
...
L2:
...
We can get a small performance boost by emitting this instead:
jnCC L2
L1:
...
L2:
...
This testcase shows an example of this:
float func(float x, float y) {
double product = (double)x * y;
if (product == 0.0)
return product;
return product - 1.0;
}
llvm-svn: 101075
argument that had to be between 0 and 7 to have any value,
firing an assert later in the AsmPrinter. Now, the
disassembler rejects instructions with out-of-range values
for that immediate.
llvm-svn: 100694
When a frame pointer is not otherwise required, and dynamic stack alignment
is necessary solely due to the spilling of a register with larger alignment
requirements than the default stack alignment, the frame pointer can be both
used as a general purpose register and a frame pointer. That goes poorly, for
obvious reasons. This patch brings back a bit of old logic for identifying
the use of such registers and conservatively reserves the frame pointer
during register allocation in such cases.
For now, implement for X86 only since it's 32-bit linux which is hitting this,
and we want a targeted fix for 2.7. As a follow-on, this will be expanded
to handle other targets, as theoretically the problem could arise elsewhere
as well.
llvm-svn: 100559
When a target instruction wants to set target-specific flags, it should simply
set bits in the TSFlags bit vector defined in the Instruction TableGen class.
This works well because TableGen resolves member references late:
class I : Instruction {
AddrMode AM = AddrModeNone;
let TSFlags{3-0} = AM.Value;
}
let AM = AddrMode4 in
def ADD : I;
TSFlags gets the expected bits from AddrMode4 in this example.
llvm-svn: 100384
"asm printering" happens through MCStreamer. This also
Streamerizes PIC16 debug info, which escaped my attention.
This removes a leak from LLVMTargetMachine of the 'legacy'
output stream.
llvm-svn: 100327
raw_ostream to print an instruction to had to be specified
at MCInstPrinter construction time instead of being able
to pick at each call to printInstruction.
llvm-svn: 100307
Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
llvm-svn: 100304
a new subtarget option for AES and check for the support. Add "westmere"
line of processors and add AES-NI support to the core i7.
Add a couple of TODOs for information I couldn't verify.
llvm-svn: 100231
Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
llvm-svn: 100191
1. Makes it possible to lower with floating point loads and stores.
2. Avoid unaligned loads / stores unless it's fast.
3. Fix some memcpy lowering logic bug related to when to optimize a
load from constant string into a constant.
4. Adjust x86 memcpy lowering threshold to make it more sane.
5. Fix x86 target hook so it uses vector and floating point memory
ops more effectively.
rdar://7774704
llvm-svn: 100090
aes instead of sse4.2. Add a brief todo for a subtarget flag and rework
the aeskeygenassist instruction to more closely match the docs.
llvm-svn: 100078
SSEDomainFix will collapse to the domain with the lower number when it has a
choice. The SSEPackedSingle domain often has smaller instructions, so prefer
that.
llvm-svn: 99952
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
A update of langref will occur in a subsequent checkin.
llvm-svn: 99928
create symbols. It is extremely error prone and a source of a lot
of the remaining integrated assembler bugs on x86-64.
This fixes rdar://7807601.
llvm-svn: 99902
makes calls a little bit more consistent and allows easy removal of the
specializations in the future. Convert all callers to the templated functions.
llvm-svn: 99838
On Nehalem and newer CPUs there is a 2 cycle latency penalty on using a register
in a different domain than where it was defined. Some instructions have
equvivalents for different domains, like por/orps/orpd.
The SSEDomainFix pass tries to minimize the number of domain crossings by
changing between equvivalent opcodes where possible.
This is a work in progress, in particular the pass doesn't do anything yet. SSE
instructions are tagged with their execution domain in TableGen using the last
two bits of TSFlags. Note that not all instructions are tagged correctly. Life
just isn't that simple.
The SSE execution domain issue is very similar to the ARM NEON/VFP pipeline
issue handled by NEONMoveFixPass. This pass may become target independent to
handle both.
llvm-svn: 99524
addl $12, %esp
popl %esi
popl %edi
popl %ebx
popl %ebp
jmpl *__Block_deallocator-L1$pb(%esi) # TAILCALL
The problem is the global base register is assigned GR32 register class. TCRETURNmi needs the registers making up the address mode to have the GR32_TC register class.
The *proper* fix is for X86DAGToDAGISel::getGlobalBaseReg() to return a copy from the global base register of the machine function rather than returning the register itself. But that has the potential of causing it to be coalesced to a more restrictive register class: GR32_TC. It can introduce additional copies and spills. For something as important the PIC base, it's not worth it especially since this is not an issue on 64-bit.
llvm-svn: 99455
--- Reverse-merging r99440 into '.':
U test/MC/AsmParser/X86/x86_32-bit_cat.s
U test/MC/AsmParser/X86/x86_32-encoding.s
U include/llvm/IntrinsicsX86.td
U include/llvm/CodeGen/SelectionDAGNodes.h
U lib/Target/X86/X86InstrSSE.td
U lib/Target/X86/X86ISelLowering.h
llvm-svn: 99450
not get an "Unknown immediate size" assert failure when used. All instructions
of this form have an 8-bit immediate. Also added a test case of an example
instruction that is of this form.
llvm-svn: 99435
ISD node. The only change in the generated isel code are comments
like:
< // Src: (X86dec_flag:i16 GR16:i16:$src)
---
> // Src: (X86dec_flag:i16:i32 GR16:i16:$src)
because now it knows that X86dec_flag returns both an i16 (for the result)
and an i32 (for EFLAGS) in this case. Wewt.
llvm-svn: 99369
This is work in progress. So far, SSE execution domain tables are added to
X86InstrInfo, and a skeleton pass is enabled with -sse-domain-fix.
llvm-svn: 99345
override prefix and only the r/m16 forms should have had that. Also for variant
one, the AT&T syntax, added suffixes to all forms. Also added the missing
64-bit form for 'CRC32 r64, r/m8'. Plus added test cases for all forms and
tweaked one test case to add the needed suffixes.
llvm-svn: 98980
to input patterns, we can fix X86ISD::CMP and X86ISD::BT as taking
two inputs (which have to be the same type) and *returning an i32*.
This is how the SDNodes get made in the graph, but we weren't able
to model it this way due to deficiencies in the pattern language.
Now we can change things like this:
def UCOM_FpIr80: FpI_<(outs), (ins RFP80:$lhs, RFP80:$rhs), CompareFP,
- [(X86cmp RFP80:$lhs, RFP80:$rhs),
- (implicit EFLAGS)]>; // CC = ST(0) cmp ST(i)
+ [(set EFLAGS, (X86cmp RFP80:$lhs, RFP80:$rhs))]>;
and fix terrible crimes like this:
-def : Pat<(parallel (X86cmp GR8:$src1, 0), (implicit EFLAGS)),
+def : Pat<(X86cmp GR8:$src1, 0),
(TEST8rr GR8:$src1, GR8:$src1)>;
This relies on matching the result of TEST8rr (which is EFLAGS, which is
an implicit def) to the result of X86cmp, an i32.
llvm-svn: 98903
temporary workaround for matching inc/dec on x86_64 to the correct instruction.
- This hack will eventually be replaced with a robust mechanism for handling
matching instructions based on the available target features.
llvm-svn: 98858
Gabor Greif