I added a "thread-stop-format" to distinguish between the form
that is just the thread info (since the stop printing immediately prints
the frame info) and one with more frame 0 info - which is useful for
"thread list" and the like.
I also added a frame.no-debug boolean to the format entities so you can
print frame information differently between frames with source info and those
without.
This closes https://reviews.llvm.org/D26383.
<rdar://problem/28273697>
llvm-svn: 286288
This change introduces optional marking of the column within a source
line where a thread is stopped. This marking will show up when the
source code for a thread stop is displayed, when the debug info
knows the column information, and if the optional column marking is
enabled.
There are two separate methods for handling the marking of the stop
column:
* via ANSI terminal codes, which are added inline to the source line
display. The default ANSI mark-up is to underline the column.
* via a pure text-based caret that is added in the appropriate column
in a newly-inserted blank line underneath the source line in
question.
There are some new options that control how this all works.
* settings set stop-show-column
This takes one of 4 values:
* ansi-or-caret: use the ANSI terminal code mechanism if LLDB
is running with color enabled; if not, use the caret-based,
pure text method (see the "caret" mode below).
* ansi: only use the ANSI terminal code mechanism to highlight
the stop line. If LLDB is running with color disabled, no
stop column marking will occur.
* caret: only use the pure text caret method, which introduces
a newly-inserted line underneath the current line, where
the only character in the new line is a caret that highlights
the stop column in question.
* none: no stop column marking will be attempted.
* settings set stop-show-column-ansi-prefix
This is a text format that indicates the ANSI formatting
code to insert into the stream immediately preceding the
column where the stop column character will be marked up.
It defaults to ${ansi.underline}; however, it can contain
any valid LLDB format codes, e.g.
${ansi.fg.red}${ansi.bold}${ansi.underline}
* settings set stop-show-column-ansi-suffix
This is the text format that specifies the ANSI terminal
codes to end the markup that was started with the prefix
described above. It defaults to: ${ansi.normal}. This
should be sufficient for the common cases.
Significant leg-work was done by Adrian Prantl. (Thanks, Adrian!)
differential review: https://reviews.llvm.org/D20835
reviewers: clayborg, jingham
llvm-svn: 282105
Serialize breakpoint names & the hardware_requested attributes.
Also added a few missing affordances to SBBreakpoint whose absence
writing the tests pointed out.
<rdar://problem/12611863>
llvm-svn: 282036
Moved the guts of the code from CommandObjectBreakpoint to Target (should
have done it that way in the first place.) Added an SBBreakpointList class
so there's a way to specify which breakpoints to serialize and to report the
deserialized breakpoints.
<rdar://problem/12611863>
llvm-svn: 281520
Summary:
- Added an API to public interface that provides permissions (RWX) of
individual sections of an object file
- Earlier, there was no way to find out this information through SB
APIs
- A possible use case of this API is:
when a user wants to know the sections that have executable machine
instructions and want to write a tool on top of LLDB based on this
information
- Differential Revision: https://reviews.llvm.org/D24251
llvm-svn: 280924
Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.
See docs/structured_data/StructuredDataPlugins.md for details.
differential review: https://reviews.llvm.org/D22976
reviewers: clayborg, jingham
llvm-svn: 279202
Summary:
This patch fills in the implementation of GetMemoryRegions() on the Linux and Mac OS core file implementations of lldb_private::Process (ProcessElfCore::GetMemoryRegions and ProcessMachCore::GetMemoryRegions.) The GetMemoryRegions API was added under: http://reviews.llvm.org/D20565
The patch re-uses the m_core_range_infos list that was recently added to implement GetMemoryRegionInfo in both ProcessElfCore and ProcessMachCore to ensure the returned regions match the regions returned by Process::GetMemoryRegionInfo(addr_t load_addr, MemoryRegionInfo ®ion_info).
Reviewers: clayborg
Subscribers: labath, lldb-commits
Differential Revision: http://reviews.llvm.org/D21751
llvm-svn: 274741
- if a synthetic child comes from the same hierarchy as its parent object, then it can't be cached by SharedPointer inside the synthetic provider, or it will cause a reference loop;
- but, if a synthetic child is made from whole cloth (e.g. from an expression, a memory region, ...), then it better be cached by SharedPointer, or it will be cleared out and cause an assert() to fail if used at a later point
For most cases of self-rooted synthetic children, we have a flag we set "IsSyntheticChildrenGenerated", but we were not using it to track caching. So, what ended up happening is each provider would set up its own cache, and if it got it wrong, a hard to diagnose crash would ensue
This patch fixes that by centralizing caching in ValueObjectSynthetic - if a provider returns a self-rooted child (as per the flag), then it gets cached centrally by the ValueObject itself
This cache is used only for lifetime management and not later retrieval of child values - a different cache handles that (because we might have a mix of self-rooted and properly nested child values for the same parent, we can't trivially use this lifetime cache for retrieval)
Fixes rdar://26480007
llvm-svn: 274683
within a source file.
This isn't done, I need to make the name match smarter (right now it requires an
exact match which is annoying for methods of a class in a namespace.
Also, though we use it in tests all over the place, it doesn't look like we have
a test for Source Regexp breakpoints by themselves, I'll add that in a follow-on patch.
llvm-svn: 267834
Summary:
This fixes a leak introduced by some of these changes:
r257644
r250530
r250525
The changes made in these patches result in leaking the FILE* passed
to SetImmediateOutputFile. GetStream() will dup() the fd held by the
python caller and create a new FILE*. It will then pass this FILE*
to SetImmediateOutputFile, which always uses the flag
transfer_ownership=false when it creates a File from the FILE*.
Since transfer_ownership is false, the lldb File destructor will not
close the underlying FILE*. Because this FILE* came from a dup-ed fd,
it will also not be closed when the python caller closes its file.
Leaking the FILE* causes issues if the same file is used multiple times
by different python callers during the same lldb run, even if these
callers open and close the python file properly, as you can end up
with issues due to multiple buffered writes to the same file.
Reviewers: granata.enrico, zturner, clayborg
Subscribers: zturner, lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D18459
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 264476
This feature is controlled by an expression command option, a target property and the
SBExpressionOptions setting. FixIt's are only applied to UserExpressions, not UtilityFunctions,
those you have to get right when you make them.
This is just a first stage. At present the fixits are applied silently. The next step
is to tell the user about the applied fixit.
<rdar://problem/25351938>
llvm-svn: 264379
This patch adds ThreadSanitizer support into LLDB:
- Adding a new InstrumentationRuntime plugin, ThreadSanitizerRuntime, in the same way ASan is implemented.
- A breakpoint stops in `__tsan_on_report`, then we extract all sorts of information by evaluating an expression. We then populate this into StopReasonExtendedInfo.
- SBThread gets a new API, SBThread::GetStopReasonExtendedBacktraces(), which returns TSan’s backtraces in the form of regular SBThreads. Non-TSan stop reasons return an empty collection.
- Added some test cases.
Reviewed by Greg Clayton.
llvm-svn: 264162
That way you can set offset breakpoints that will move as the function they are
contained in moves (which address breakpoints can't do...)
I don't align the new address to instruction boundaries yet, so you have to get
this right yourself for now.
<rdar://problem/13365575>
llvm-svn: 263049
working directory by default -- a typical security problem that we
need to be more conservative about.
It adds a new target setting, target.load-cwd-lldbinit which may
be true (always read $cwd/.lldbinit), false (never read $cwd/.lldbinit)
or warn (warn if there is a $cwd/.lldbinit and don't read it). The
default is set to warn. If this is met with unhappiness, we can look
at changing the default to true (to match current behavior) on a
different platform.
This does not affect reading of ~/.lldbinit - that will still be read,
as before. If you run lldb in your home directory, it will not warn
about the presence of a .lldbinit file there.
I had to add two SB API - SBHostOS::GetUserHomeDirectory and
SBFileSpec::AppendPathComponent - for the lldb driver code to be
able to get the home directory path in an OS neutral manner.
The warning text is
There is a .lldbinit file in the current directory which is not being read.
To silence this warning without sourcing in the local .lldbinit,
add the following to the lldbinit file in your home directory:
settings set target.load-cwd-lldbinit false
To allow lldb to source .lldbinit files in the current working directory,
set the value of this variable to true. Only do so if you understand and
accept the security risk.
<rdar://problem/24199163>
llvm-svn: 261280
SUMMARY:
Get the load address for the address given by symbol and function.
Earlier, this was done for function only, this patch does it for symbol too.
This patch also adds TestAvoidBreakpointInDelaySlot.py to test this change.
Reviewers: clayborg
Subscribers: labath, zturner, mohit.bhakkad, sagar, jaydeep, lldb-commits
Differential Revision: http://reviews.llvm.org/D16049
llvm-svn: 258919
SBProcess::ReadMemory and other related functions such as
WriteMemory are returning Python string() objects. This means
that in Python 3 that are returning Unicode objects. In reality
they should be returning bytes objects which is the same as a string
in Python 2, but different in Python 3. This patch updates the
generated SWIG code to return Python bytes objects for all
memory related functions.
One quirk of this patch is that the C++ signature of ReadCStringFromMemory
has it writing c-string data into a void*. This confuses our swig
typemaps which expect that a void* means byte data. So I hacked up
a custom typemap which maps this specific function to treat the
void* as string data instead of byte data.
llvm-svn: 258743
breakpoint as "file address" so that the address breakpoint will track that
module even if it gets loaded in a different place. Also fixed the Address
breakpoint resolver so that it handles this tracking correctly.
llvm-svn: 253308
Fixed a crash that would happen if you tried to get the name of a constructor or destructor by calling "getDeclName()" instead of calling getName() (which would assert and crash).
Added the ability to get function arguments names from SBFunction.
llvm-svn: 252622
For language that support such a thing, this API allows to ask whether a type is anonymous (i.e. has been given no name)
Comes with test case
llvm-svn: 252390
instance:
break set -l c++ -r Name
will only break on C++ symbols that match Name, not ObjC or plain C symbols. This also works
for "break set -n" and there are SB API's to pass this as well.
llvm-svn: 252356
Summary:
Along with this, support for an optional argument to the "num_children"
method of a Python synthetic child provider has also been added. These have
been added with the following use case in mind:
Synthetic child providers currently have a method "has_children" and
"num_children". While the former is good enough to know if there are
children, it does not give any insight into how many children there are.
Though the latter serves this purpose, calculating the number for children
of a data structure could be an O(N) operation if the data structure has N
children. The new method added in this change provide a middle ground.
One can call GetNumChildren(K) to know if a child exists at an index K
which can be as large as the callers tolerance can be. If the caller wants
to know about children beyond K, it can make an other call with 2K. If the
synthetic child provider maintains state about it counting till K
previosly, then the next call is only an O(K) operation. Infact, all
calls made progressively with steps of K will be O(K) operations.
Reviewers: vharron, clayborg, granata.enrico
Subscribers: labath, lldb-commits
Differential Revision: http://reviews.llvm.org/D13778
llvm-svn: 250930
This makes LLDB launch and create a REPL, specifying no target so that the REPL
can create one for itself. Also added the "--repl-language" option, which
specifies the language to use. Plumbed the relevant arguments and errors
through the REPL creation mechanism.
llvm-svn: 250773
Added the ability to specify if an attach by name should be synchronous or not in SBAttachInfo and ProcessAttachInfo.
<rdar://problem/22821480>
llvm-svn: 249361
debugging optimized code. Adds new methods on Function/SBFunction
to query whether a given function is optimized. Adds a new
function.is-optimized format entity and changes the default
frame-format to append "[opt]" if the function was built with
optimization.
The only indication that a binary was built with optimization
that we have right now is the presence of the DW_AT_APPLE_optimized
attribute (DW_FORM_flag value 1) in the DW_TAG_compile_unit.
The absence of this flag may mean that the compile_unit was not
compiled with optimization, or it may mean that the producer
does not generate this attribute.
Currently this only works for dSYM debugging. When we create
the CompileUnit with dwarf-in-.o-file debugging we don't have
the attribute value yet so it's not set. I need to find the
flag value when we do start to read the .o file DWARF and
set the CompileUnit's status at that point - but haven't
done it yet.
I'm also going to add a mechanism for issuing warnings to users
such that they're only issued once in a debug session and
there is away for users to suppress these warnings altogether
via .lldbinit file settings. But I want to get this changeset
committed now that it's at a useful state.
<rdar://problem/19281172>
llvm-svn: 243508
Jim Ingham