support targets that support these conversions. Users should avoid using
this node as the current targets don't generating code for it.
llvm-svn: 59001
This is Chris' patch from the PR, modified to realize that
SETUGT/SETULT occur legitimately with integers, plus
two fixes in LegalizeDAG to pass a valid result type into
LegalizeSetCC. The argument of TLI.getSetCCResultType is
ignored on PPC, but I think I'm following usage elsewhere.
llvm-svn: 58871
This is a temporary fix for the -print-emitted-asm option, where
errs() is used as the stream, in the case where other code is
using stderr without using errs()' buffer. Hopefully soon we'll
fix errs() to be non-buffered instead. Patch by Preston Gurd.
llvm-svn: 58859
priority function. Instead, just iterate over the AllNodes list, which is
already in topological order. This eliminates a fair amount of bookkeeping,
and speeds up the isel phase by about 15% on many testcases.
The impact on most targets is that AddToISelQueue calls can be simply removed.
In the x86 target, there are two additional notable changes.
The rule-bending AND+SHIFT optimization in MatchAddress that creates new
pre-isel nodes during isel is now a little more verbose, but more robust.
Instead of either creating an invalid DAG or creating an invalid topological
sort, as it has historically done, it can now just insert the new nodes into
the node list at a position where they will be consistent with the topological
ordering.
Also, the address-matching code has logic that checked to see if a node was
"already selected". However, when a node is selected, it has all its uses
taken away via ReplaceAllUsesWith or equivalent, so it won't recieve any
further visits from MatchAddress. This code is now removed.
llvm-svn: 58748
so that va_start/va_arg/et.al. will walk arguments correctly for Cell SPU.
N.B.: Because neither clang nor llvm-gcc-4.2 can be built for CellSPU, this is
still unexorcised code.
llvm-svn: 58415
allows ppcf128->int conversion to work with
DeadInstructionElimination. This is now turned
off but RM is harmless. It does not do a complete
job of modeling the rounding mode.
Revert marking MFCR as using all 7 CR subregisters;
while correct, this caused the problem in PR 2964,
plus the local RA crash noted in the comments.
This was needed to make DeadInstructionElimination,
but as we are not running that, it is backed out
for now. Eventually it should go back in and the
other problems fixed where they're broken.
llvm-svn: 58391
Since the ARM constant pool handling supercedes the standard LLVM constant
pool entirely, the JIT emitter does not allocate space for the constants,
nor initialize the memory. The constant pool is considered part of the
instruction stream.
Likewise, when resolving relocations into the constant pool, a hook into
the target back end is used to resolve from the constant ID# to the
address where the constant is stored.
For now, the support in the ARM emitter is limited to 32-bit integer. Future
patches will expand this to the full range of constants necessary.
llvm-svn: 58338
ppcf128 to i32 conversion and expand it into a code
sequence like in LegalizeDAG. This needs custom
ppc lowering of FP_ROUND_INREG, so turn that on and
make it work with LegalizeTypes. Probably PPC should
simply custom lower the original conversion.
llvm-svn: 58329
a memset using 16-byte XMM stores, but where the stack realignment code
didn't work. Until it does (PR2962) disable use of xmm regs in memcpy
and memset formation for linux and other targets with insufficiently
aligned stacks.
This is part of PR2888
llvm-svn: 58317
flag. Then in a debugger developers can set breakpoints at these calls
to see waht is about to be selected and what the resulting subgraph
looks like. This really helps when debugging instruction selection.
llvm-svn: 58278
target-independent code to target-specific code. This prevents it
from running on targets that aren't using fast-isel.
In addition to saving compile time, this addresses the problem
that not all targets are prepared for it. In order to use this
pass, all instructions must declare all their fixed uses and
defs of physical registers.
llvm-svn: 58144
variable is moved to the execution engine. The JIT calls the TargetJITInfo
to allocate thread local storage. Currently, only linux/x86 knows how to
allocate thread local global variables.
llvm-svn: 58142
LHS is a foldable load, then LHS and RHS are swapped
and SetCCOpcode is changed to SETUGT. But the later
code is expecting operands to be the wrong way round
for SETUGT, but they are not in this case, resulting
in an inverted compare. The solution is to move the
load normalization before the correction for SETUGT.
This bug was tickled by LegalizeTypes which happened
to legalize the testcase slightly differently to
LegalizeDAG.
llvm-svn: 58092
assume that i64 has been turned into a BUILD_PAIR
node (when called from LegalizeTypes this hasn't
happened yet) and don't use a vector shuffle mask
with an illegal element type.
llvm-svn: 57972
The same one Apple gcc uses, faster. Also gets the
extreme case in gcc.c-torture/execute/ieee/rbug.c
correct which we weren't before; this is not
sufficient to get the test to pass though, there
is another bug.
llvm-svn: 57926
in the 32-bit signed offset field of addresses. Even though this
may be intended, some linkers refuse to relocate code where the
relocated address computation overflows.
Also, fix the sign-extension of constant offsets to use the
actual pointer size, rather than the size of the GlobalAddress
node, which may be different, for example on x86-64 where MVT::i32
is used when the address is being fit into the 32-bit displacement
field.
llvm-svn: 57885
Where previously LLVM might emit code like this:
ucomisd %xmm1, %xmm0
setne %al
setp %cl
orb %al, %cl
jne .LBB4_2
it now emits this:
ucomisd %xmm1, %xmm0
jne .LBB4_2
jp .LBB4_2
It has fewer instructions and uses fewer registers, but it does
have more branches. And in the case that this code is followed by
a non-fallthrough edge, it may be followed by a jmp instruction,
resulting in three branch instructions in sequence. Some effort
is made to avoid this situation.
To achieve this, X86ISelLowering.cpp now recognizes FCMP_OEQ and
FCMP_UNE in lowered form, and replace them with code that emits
two branches, except in the case where it would require converting
a fall-through edge to an explicit branch.
Also, X86InstrInfo.cpp's branch analysis and transform code now
knows now to handle blocks with multiple conditional branches. It
uses loops instead of having fixed checks for up to two
instructions. It can now analyze and transform code generated
from FCMP_OEQ and FCMP_UNE.
llvm-svn: 57873
the copy instruction from the instruction list before asking the
target to create the new instruction. This gets the old instruction
out of the way so that it doesn't interfere with the target's
rematerialization code. In the case of x86, this helps it find
more cases where EFLAGS is not live.
Also, in the X86InstrInfo.cpp, teach isSafeToClobberEFLAGS to check
to see if it reached the end of the block after scanning each
instruction, instead of just before. This lets it notice when the
end of the block is only two instructions away, without doing any
additional scanning.
These changes allow rematerialization to clobber EFLAGS in more
cases, for example using xor instead of mov to set the return value
to zero in the included testcase.
llvm-svn: 57872
is re-written by the callback to branch directly to the compiled code
in future invocations.
Added back in range-based memory permission functions for the updating of
the stub on Darwin.
llvm-svn: 57846
LowerOperation if it doesn't know what else to do.
This methods should probably be factorized some,
but this is good enough for the moment. Have
LowerATOMIC_BINARY_64 use EXTRACT_ELEMENT rather
than assuming the operand is a BUILD_PAIR (if it
is then getNode will automagically simplify the
EXTRACT_ELEMENT). This way LowerATOMIC_BINARY_64
usable from LegalizeTypes.
llvm-svn: 57831
and add a TargetLowering hook for it to use to determine when this
is legal (i.e. not in PIC mode, etc.)
This allows instruction selection to emit folded constant offsets
in more cases, such as the included testcase, eliminating the need
for explicit arithmetic instructions.
This eliminates the need for the C++ code in X86ISelDAGToDAG.cpp
that attempted to achieve the same effect, but wasn't as effective.
Also, fix handling of offsets in GlobalAddressSDNodes in several
places, including changing GlobalAddressSDNode's offset from
int to int64_t.
The Mips, Alpha, Sparc, and CellSPU targets appear to be
unaware of GlobalAddress offsets currently, so set the hook to
false on those targets.
llvm-svn: 57748
in 32-bit mode instead of assigning a register pair. This has nothing to
do with PR2356, but I happened to notice it while working on it.
llvm-svn: 57704
use a SUB instruction instead of an ADD, because -128 can be
encoded in an 8-bit signed immediate field, while +128 can't be.
This avoids the need for a 32-bit immediate field in this case.
A similar optimization applies to 64-bit adds with 0x80000000,
with the 32-bit signed immediate field.
To support this, teach tablegen how to handle 64-bit constants.
llvm-svn: 57663
shift counts, and patterns that match dynamic shift counts
when the subtract is obscured by a truncate node.
Add DAGCombiner support for recognizing rotate patterns
when the shift counts are defined by truncate nodes.
Fix and simplify the code for commuting shld and shrd
instructions to work even when the given instruction doesn't
have a parent, and when the caller needs a new instruction.
These changes allow LLVM to use the shld, shrd, rol, and ror
instructions on x86 to replace equivalent code using two
shifts and an or in many more cases.
llvm-svn: 57662
the predicates by extending simple predicates to create
more complex predicates instead of duplicating the logic
for the simple predicates.
This doesn't reduce much redundancy in DAGISelEmitter.cpp's
generated source yet; that will require improvements to
DAGISelEmitter.cpp's instruction sorting, to make it more
effectively group nodes with similar predicates together.
llvm-svn: 57565
1. Compute action in X86SelectSelect based on MVT instead of type.
2. Use TLI.getValueType(..) instead of MVT::getVT(..) because the former
handles pointers and the later doesn't.
3. Don't pass TLI into isTypeLegal, since it already has access to it as
an ivar.
#2 gives fast isel some minor new functionality: handling load/stores of
pointers.
llvm-svn: 57552
which makes it easy to share the compare/imm folding logic with 'setcc'.
This shaves a bunch of instructions off the common select case, which
happens a lot in llvm-gcc.
llvm-svn: 57549
i.e. conditions that cannot be checked with a single instruction. For example,
SETONE and SETUEQ on x86.
- Teach legalizer to implement *illegal* setcc as a and / or of a number of
legal setcc nodes. For now, only implement FP conditions. e.g. SETONE is
implemented as SETO & SETNE, SETUEQ is SETUO | SETEQ.
- Move x86 target over.
llvm-svn: 57542
- Move the EH landing-pad code and adjust it so that it works
with FastISel as well as with SDISel.
- Add FastISel support for @llvm.eh.exception and
@llvm.eh.selector.
llvm-svn: 57539
instead of requiring all "short description" strings to begin with
two spaces. This makes these strings less mysterious, and it fixes
some cases where short description strings mistakenly did not
begin with two spaces.
llvm-svn: 57521
create a new DAG node to represent the new shift to keep the
DAG consistent, even though it'll almost always be folded into
the address.
If a user of the resulting address has multiple uses, the
nodes may get revisited by a later MatchAddress call, in which
case DAG inconsistencies do matter.
This fixes PR2849.
llvm-svn: 57465
the same pattern as roundpd/roundps, the Intel compiler
builtins do not: rounds* has an extra operand. Fixes
gcc.target/i386/sse4_1-rounds[sd]-[1234].c
llvm-svn: 57370
GCC 4.4.0 gives an error on the "int" declaration for example
saying that it has already been declared (using the "short"
one). Using templates here allow the compiler to distinguish
between the function to choose.
Also, "llvm/Support/DataTypes.h" was not included, leading to
error messages about not knowing "uint32_t" for example.
Patch by Samuel Tardieu.
llvm-svn: 57292
X86::CL that was used, emit an EXTRACT_SUBREG from the CL
super-register to CL. This more precisely describes how the
CL register is being used.
llvm-svn: 57264
Instead, just create one, and make sure everything that needs
it can access it. Previously most of the SelectionDAGISel
subclasses all had their own TargetLowering object, which was
redundant with the TargetLowering object in the TargetMachine
subclasses, except on Sparc, where SparcTargetMachine
didn't have a TargetLowering object. Change Sparc to work
more like the other targets here.
llvm-svn: 57016
local register allocator's physreg liveness doesn't recognize subregs,
so it doesn't know that defs of %ecx that are immediately followed by
uses of %cl aren't dead. This comes up due to the way fast-isel emits
shift instructions.
This is a temporary workaround. Arguably, local regalloc should
handle subreg references correctly. On the other hand, perhaps
fast-isel should use INSERT_SUBREG instead of just assigning to the
most convenient super-register of %cl when lowering shifts.
This fixes MultiSource/Benchmarks/MallocBench/espresso,
MultiSource/Applications/hexxagon, and others, under -fast.
llvm-svn: 56947
a constant vector ("{0x123, 0x456}" syntax). The fix is to simplify the
_mm_srli_si128 macro, and move the "* 8" from the macro into the compiler
back-end. I can't change the existing __builtins because so many people are
using them :-(."
Patch by Stuart Hastings!
llvm-svn: 56944
This allows the 64-bit forms to use+def RSP instead of ESP. This
doesn't fix any real bugs today, but it is more precise and it
makes the debug dumps on x86-64 look more consistent.
Also, add some comments describing the CALL instructions' physreg
operand uses and defs.
llvm-svn: 56925
`-fno-builtin' flag. Currently, it's used to replace "memset" with "_bzero"
instead of "__bzero" on Darwin10+. This arguably violates the meaning of this
flag, but is currently sufficient. The meaning of this flag should become more
specific over time.
llvm-svn: 56885
Completely eliminate the TopOrder std::vector. Instead, sort
the AllNodes list in place. This also eliminates the need to
call AllNodes.size(), a linear-time operation, before
performing the sort.
Also, eliminate the Sources temporary std::vector, since it
essentially duplicates the sorted result as it is being
built.
This also changes the direction of the topological sort
from bottom-up to top-down. The AllNodes list starts out in
roughly top-down order, so this reduces the amount of
reordering needed. Top-down is also more convenient for
Legalize, and ISel needed only minor adjustments.
llvm-svn: 56867
its size). Adjust various lowering functions to
pass this info through from CallInst. Use it to
implement sseregparm returns on X86. Remove
X86_ssecall calling convention.
llvm-svn: 56677
require RIP-relative addressing and use it to fix a bug
in X86FastISel in x86-64 PIC mode, where it was trying to
use base/index registers with RIP-relative addresses. This
fixes a bunch of x86-64 testsuite failures.
llvm-svn: 56676
information is in an unreachable block, then it's possible that the high/low pc
values won't be set for the dwarf information. E.g., this function:
void abort(void) __attribute__((__noreturn__));
void dead_beef(void) __attribute__ ((noreturn));
int *b;
void dead_beef(void) {
*b=0xdeadbeef;
abort();
}
has a call to "@llvm.dbg.region.end" only in the unreachable block:
define void @dead_beef() noreturn nounwind {
entry:
call void @llvm.dbg.func.start(...)
call void @llvm.dbg.stoppoint(...)
...
call void @abort( ) noreturn nounwind
unreachable
return: ; No predecessors!
call void @llvm.dbg.stoppoint(...)
call void @llvm.dbg.region.end(...)
ret void
}
The dwarf information emitted is something like:
0x00000084: TAG_subprogram [5]
AT_name( "dead_beef" )
AT_external( 0x01 )
AT_prototyped( 0x01 )
AT_decl_file( 0x01 )
AT_decl_line( 0x08 )
Note that this is *not* the best fix for this problem, but a band-aid for an
gaping wound. This code needs to be changed when we revamp our debugging
information.
llvm-svn: 56628
s/ParamAttr/Attribute/g
s/PAList/AttrList/g
s/FnAttributeWithIndex/AttributeWithIndex/g
s/FnAttr/Attribute/g
This sets the stage
- to implement function notes as function attributes and
- to distinguish between function attributes and return value attributes.
This requires corresponding changes in llvm-gcc and clang.
llvm-svn: 56622
Scott Michel