Summary: Separated some instruction and pseudo-instruction definitions from InstAlias definitions, added banner for pseudo-instructions and removed a redundant whitespace from a pseudo-instruction definition. No functional change.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7552
llvm-svn: 230327
With this patch we allow the SCoP detection to detect regions as SCoPs
which have non-affine control flow inside. All non-affine regions are
tracked and later accessible to the ScopInfo.
As there is no real difference, non-affine branches as well as
floating point branches are covered (and both called non-affine
control flow). However, the detection is restricted to
overapproximate only loop free regions.
llvm-svn: 230325
Sanitizers work on ancient kernels and were depending on types existing.
When those types were removed, the sanitizer build broke. See bug
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=59009 for more information.
This patch fixes it by isolating the need for those types only when the
feature is actually needed, thus allowing one to compile the kernel with
or without that change, irrespective of its version.
Patch by Christophe Lyon.
llvm-svn: 230324
The buildbot failed to build with
error: variable ‘enable_fp’ set but not used [-Werror=unused-but-set-variable]
let's add a `(void)enable_fp;`.
llvm-svn: 230323
Summary:
Add -exec-abort command + test.
Also, I had fixed an error, when lldb-mi exits on eStateExited. With current patch we can re-run target:
```
-file-exec-and-symbols hello
^done
-exec-run
^running
*stopped,reason="breakpoint-hit"...
-exec-abort
^done
*stopped,reason="exited-normally"... <- program exits
-exec-run <- run again
^running
*stopped,reason="breakpoint-hit"...
```
All tests pass on OS X.
Reviewers: zturner, emaste, abidh, clayborg
Reviewed By: abidh, clayborg
Subscribers: lldb-commits, emaste, zturner, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D7794
llvm-svn: 230321
This new class makes it easier to change the timeout of a
GDBRemoteCommunication instance for a short time and then restore it to
its original value.
Differential revision: http://reviews.llvm.org/D7826
llvm-svn: 230319
In debug mode (COMPILER_RT_DEBUG=On), we still build with -fomit-frame-pointer and wrap_ioctl doesn't set up a proper stack frame. In release mode it does, because ioctl_common_pre gets inlined into wrap_ioctl and it uses the COMMON_INTERCEPTOR_READ_RANGE macro which in the end calls GET_CURRENT_FRAME and that forces the compiler to generate a stack frame for the function.
Not having a proper stack frame breaks the unwinder. This patch forces to generate a frame pointer (via ENABLE_FRAME_POINTER macro).
Reviewed at http://reviews.llvm.org/D7815
llvm-svn: 230318
When AddressSanitizer only a single dynamic alloca and no static allocas, due to an early exit from FunctionStackPoisoner::poisonStack we forget to unpoison the dynamic alloca. This patch fixes that.
Reviewed at http://reviews.llvm.org/D7810
llvm-svn: 230317
When AddressSanitizer only a single dynamic alloca and no static allocas, due to an early exit from FunctionStackPoisoner::poisonStack we forget to unpoison the dynamic alloca. This patch fixes that.
Reviewed at http://reviews.llvm.org/D7810
llvm-svn: 230316
MSVC does not support C99 _Complex.
ICC, however, does support it on windows x86_64, and treats it, for purposes of parameter passing, as equivalent to a struct containing two fields (for the real and imaginary part).
Differential Revision: http://reviews.llvm.org/D7825
llvm-svn: 230315
This would cause frameworks to have spurious "redefinition" errors if
they had both a (legacy) "module.map" and a (new) "module.modulemap" file and we
happened to do a sub-directory search in that directory using a
non-framework include path (e.g. -Ifoo/ -Ffoo/). For migration
purposes it's very handy that the compiler will prefer the new spelling
of the filename and not look at the old one if it doesn't need to.
llvm-svn: 230308
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
rdar://problem/19104245
This reapplies r230044 with a fixed configure+make build and updated
dependencies. Take 3.
llvm-svn: 230305
When generating coverage maps, we were traversing the body as if it
were part of the parent function, but this doesn't make sense since
we're currently counting lambdas as separate functions.
llvm-svn: 230304
bug is not actually modules-specific, but it's a little tricky to tickle it
outside of modules builds, so submitting with the reduced testcase I have.
llvm-svn: 230303
Summary: Begin to add various address modes; including alloca.
Test Plan: Make sure there are no regressions in test-suite at O0/02 in mips32r1/r2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: echristo, rfuhler, llvm-commits
Differential Revision: http://reviews.llvm.org/D6426
llvm-svn: 230300
Also, since most of the time the lack of such information is a serious problem that hinders productive debugging, emit an actual user visible warning when this occurs (once per process)
Fixes rdar://19898507
llvm-svn: 230299
Summary:
GCC emits a pretty amusing warning when there are apostrophes in a #warning:
```warning: invalid suffix on literal; C++11 requires a space between literal and identifier [-Wliteral-suffix]```
Reword the warning to avoid this, and be more consistent with other warnings in libc++.
Reviewers: danalbert
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7818
llvm-svn: 230298
This is a follow up to r230233 to fix something that I noticed by
inspection. The AddrModeT2_i8s4 addressing mode does not support
negative offsets. I spent a good chunk of the day trying to come up with
a testcase for this but was not successful. This addressing mode is used
to spill and restore GPRPair registers in Thumb2 code and that does not
happen often. We also make very limited used of negative offsets when
lowering frame indexes. I am going ahead with the change anyway, because
I am pretty confident that it is correct. I also added a missing assertion
to check that the low bits of the scaled offset are zero.
llvm-svn: 230297
No two elements of this array should be the same, but the standard library
may pass the same element as both arguments to this function.
llvm-svn: 230293
Clang has introduced ::max_align_t in stddef.h in r201729, but libc++ was
already defining std::max_align_t on Darwin because there was none in the
global namespace. After that Clang commit though, libc++ started defining
std::max_align_t to be a typedef for ::max_align_t, which has a different
definition. This changed the ABI. This commit restores the previous
definition.
rdar://19919394 rdar://18557982
llvm-svn: 230292
The bug was a result of getPreStartForExtend interpreting nsw/nuw
flags on an add recurrence more strongly than is legal. {S,+,X}<nsw>
implies S+X is nsw only if the backedge of the loop is taken at least
once.
NOTE: I had accidentally committed an unrelated change with the commit
message of this change in r230275 (r230275 was reverted in r230279).
This is the correct change for this commit message.
Differential Revision: http://reviews.llvm.org/D7808
llvm-svn: 230291
When debugging LTO issues with ld64, we use -save-temps to save the merged
optimized bitcode file, then invoke ld64 again on the single bitcode file to
speed up debugging code generation passes and ld64 stuff after code generation.
llvm linking a single bitcode file via lto_codegen_add_module will generate a
different bitcode file from the single input. With the newly-added
lto_codegen_set_module, we can make sure the destination module is the same as
the input.
lto_codegen_set_module will transfer the ownship of the module to code
generator.
rdar://19024554
llvm-svn: 230290
Revise the fix to https://code.google.com/p/address-sanitizer/issues/detail?id=178:
always disable strict init-order checking the first time dlopen() is
called: at this point shared library is allowed to access globals
defined in the main executable, as they are guaranteed to be
initialized. Revise the test cases:
* simplify init-order-dlopen.cc test case: make it Linux-specific
(there's no strict init-order checking on other platforms anyway),
and single-threaded.
* reinforce init-order-pthread-create.cc test case: make sure that
init-order checker would produce a false positive unless we
turn it off at the moment we call pthread_create().
llvm-svn: 230288
This case is interesting because ScalarEvolutionExpander lowers min(a,
b) as ~max(~a,~b). I think the profitability heuristics can be made
more clever/aggressive, but this is a start.
Differential Revision: http://reviews.llvm.org/D7821
llvm-svn: 230285
This is implemented by making a new FileSystem function:
bool
FileSystem::IsLocal(const FileSpec &spec)
Then using this in a new function:
DataBufferSP
FileSpec::MemoryMapFileContentsIfLocal(off_t file_offset, size_t file_size) const;
This function only mmaps data if the file is a local file since that means we can reliably page in data. We were experiencing crashes where people would use debug info files on network mounted file systems and that mount would go away and cause the next access to a page that wasn't paged in to crash LLDB.
We now avoid this by just copying the data into a heap buffer and keeping a permanent copy to avoid the crash. Updated all previous users of FileSpec::MemoryMapFileContentsIfLocal() in ObjectFile subclasses over to use the new FileSpec::MemoryMapFileContentsIfLocal() function.
<rdar://problem/19470249>
llvm-svn: 230283
When emitting the increment operation, SCEVExpander marks the
operation as nuw or nsw based on the flags on the preincrement SCEV.
This is incorrect because, for instance, it is possible that {-6,+,1}
is <nuw> while {-6,+,1}+1 = {-5,+,1} is not.
This change teaches SCEV to mark the increment as nuw/nsw only if it
can explicitly prove that the increment operation won't overflow.
Apart from the attached test case, another (more realistic) manifestation
of the bug can be seen in Transforms/IndVarSimplify/pr20680.ll.
NOTE: this change was landed with an incorrect commit message in
rL230275 and was reverted for that reason in rL230279. This commit
message is the correct one.
Differential Revision: http://reviews.llvm.org/D7778
llvm-svn: 230280
230275 got committed with an incorrect commit message due to a mixup
on my side. Will re-land in a few moments with the correct commit
message.
llvm-svn: 230279
This patch teaches the backend how to expand a double-half conversion into
a double-float conversion immediately followed by a float-half conversion.
We do this only under fast-math, and if float-half conversions are legal
for the target.
Added test CodeGen/X86/fastmath-float-half-conversion.ll
Differential Revision: http://reviews.llvm.org/D7832
llvm-svn: 230276
The bug was a result of getPreStartForExtend interpreting nsw/nuw
flags on an add recurrence more strongly than is legal. {S,+,X}<nsw>
implies S+X is nsw only if the backedge of the loop is taken at least
once.
Differential Revision: http://reviews.llvm.org/D7808
llvm-svn: 230275
In LLD's model, symbol is a property of the node (atom) and not a property of
edge (reference). Prior to this patch, we stored the symbol in the reference.
From post-commit comments, it seemed better to create a map from the reference
to the symbol instead and use this mapping wherever desired.
Address comments from Ruiu/Simon Atanasyan.
llvm-svn: 230273
Toma Tabacu