ArchDefaultUnwindPlan plug-in interfaces are now cached per architecture
instead of being leaked for every frame.
Split the ArchDefaultUnwindPlan_x86 into ArchDefaultUnwindPlan_x86_64 and
ArchDefaultUnwindPlan_i386 interfaces.
There were sporadic crashes that were due to something leaking or being
destroyed when doing stack crawls. This patch should clear up these issues.
llvm-svn: 125541
LLDB plugin directory and a user LLDB plugin directory. We currently still
need to work out at what layer the plug-ins will be, but at least we are
prepared for plug-ins. Plug-ins will attempt to be loaded from the
"/Developer/Library/PrivateFrameworks/LLDB.framework/Resources/Plugins"
folder, and from the "~/Library/Application Support/LLDB/Plugins" folder on
MacOSX. Each plugin will be scanned for:
extern "C" bool LLDBPluginInitialize(void);
extern "C" void LLDBPluginTerminate(void);
If at least LLDBPluginInitialize is found, the plug-in will be loaded. The
LLDBPluginInitialize function returns a bool that indicates if the plug-in
should stay loaded or not (plug-ins might check the current OS, current
hardware, or anything else and determine they don't want to run on the current
host). The plug-in is uniqued by path and added to a static loaded plug-in
map. The plug-in scanning happens during "lldb_private::Initialize()" which
calls to the PluginManager::Initialize() function. Likewise with termination
lldb_private::Terminate() calls PluginManager::Terminate(). The paths for the
plug-in directories is fetched through new Host calls:
bool Host::GetLLDBPath (ePathTypeLLDBSystemPlugins, dir_spec);
bool Host::GetLLDBPath (ePathTypeLLDBUserPlugins, dir_spec);
This way linux and other systems can define their own appropriate locations
for plug-ins to be loaded.
To allow dynamic shared library loading, the Host layer has also been modified
to include shared library open, close and get symbol:
static void *
Host::DynamicLibraryOpen (const FileSpec &file_spec,
Error &error);
static Error
Host::DynamicLibraryClose (void *dynamic_library_handle);
static void *
Host::DynamicLibraryGetSymbol (void *dynamic_library_handle,
const char *symbol_name,
Error &error);
lldb_private::FileSpec also has been modified to support directory enumeration
in an attempt to abstract the directory enumeration into one spot in the code.
The directory enumertion function is static and takes a callback:
typedef enum EnumerateDirectoryResult
{
eEnumerateDirectoryResultNext, // Enumerate next entry in the current directory
eEnumerateDirectoryResultEnter, // Recurse into the current entry if it is a directory or symlink, or next if not
eEnumerateDirectoryResultExit, // Exit from the current directory at the current level.
eEnumerateDirectoryResultQuit // Stop directory enumerations at any level
};
typedef FileSpec::EnumerateDirectoryResult (*EnumerateDirectoryCallbackType) (void *baton,
FileSpec::FileType file_type,
const FileSpec &spec);
static FileSpec::EnumerateDirectoryResult
FileSpec::EnumerateDirectory (const char *dir_path,
bool find_directories,
bool find_files,
bool find_other,
EnumerateDirectoryCallbackType callback,
void *callback_baton);
This allow clients to specify the directory to search, and specifies if only
files, directories or other (pipe, symlink, fifo, etc) files will cause the
callback to be called. The callback also gets to return with the action that
should be performed after this directory entry. eEnumerateDirectoryResultNext
specifies to continue enumerating through a directory with the next entry.
eEnumerateDirectoryResultEnter specifies to recurse down into a directory
entry, or if the file is not a directory or symlink/alias to a directory, then
just iterate to the next entry. eEnumerateDirectoryResultExit specifies to
exit the current directory and skip any entries that might be remaining, yet
continue enumerating to the next entry in the parent directory. And finally
eEnumerateDirectoryResultQuit means to abort all directory enumerations at
all levels.
Modified the Declaration class to not include column information currently
since we don't have any compilers that currently support column based
declaration information. Columns support can be re-enabled with the
additions of a #define.
Added the ability to find an EmulateInstruction plug-in given a target triple
and optional plug-in name in the plug-in manager.
Fixed a few cases where opendir/readdir was being used, but yet not closedir
was being used. Soon these will be deprecated in favor of the new directory
enumeration call that was added to the FileSpec class.
llvm-svn: 124716
This patch is enough to have shared objects recognized by LLDB. We can handle
position independent executables. We can handle dynamically loaded modules
brought in via dlopen.
The DYLDRendezvous class provides an interface to a structure present in the
address space of ELF-based processes. This structure provides the address of a
function which is called by the linker each time a shared object is loaded and
unloaded (thus a breakpoint at that address will let LLDB intercept such
events), a list of entries describing the currently loaded shared objects, plus
a few other things.
On Linux, processes are brought up with an auxiliary vector on the stack. One
element in this vector contains the (possibly dynamic) entry address of the
process. One does not need to walk the stack to find this information as it is
also available under /proc/<pid>/auxv. The new AuxVector class provides a
convenient read-only view of this auxiliary vector information. We use the
dynamic entry address and the address as specified in the object file to compute
the actual load address of the inferior image. This strategy works for both
normal executables and PIE's.
llvm-svn: 123592
exist within the same process (one script interpreter object per debugger object). The
python script interpreter objects are all using the same global Python script interpreter;
they use separate dictionaries to keep their data separate, and mutex's to prevent any object
attempting to use the global Python interpreter when another object is already using it.
llvm-svn: 123415
SymbolFileDWARFDebugMap handles the parsing of OSO stabs which are effectively a
Mach-O specific feature and is incompatible with other object file formats.
llvm-svn: 123308
changing it to use it. There was an extra parameter added to the static
accessor global user settings controllers that wasn't needed. A bool was being
used as a parameter to the accessor just so it could be used to clean up
the global user settings controller which is now fixed by splitting up the
initialization into the "static void Class::Initialize()", access into the
"static UserSettingsControllerSP & Class::GetSettingsController()", and
cleanup into "static void Class::Terminate()".
Also added initialize and terminate calls to the logging code to avoid issues
when LLDB is shutting down. There were cases after the logging was switched
over to use shared pointers where we could crash if the global destructor
chain was being run and it causes the log to be destroyed and any any logging
occurred.
llvm-svn: 119757
Not yet enabled as the default unwinder but there are no known
backtrace problems with the code at this point.
Added 'log enable lldb unwind' to help diagnose backtrace problems;
this output needs a little refining but it's a good first step.
eh_frame information is currently read unconditionally - the code
is structured to allow this to be delayed until it's actually needed.
There is a performance hit when you have to parse the eh_frame
information for any largeish executable/library so it's necessary
to avoid if possible.
It's confusing having both the UnwindPlan::RegisterLocation struct
and the RegisterConextLLDB::RegisterLocation struct, I need to rename
one of them.
The writing of registers isn't done in the RegisterConextLLDB subclass
yet; neither is the running of complex DWARF expressions from eh_frame
(e.g. used for _sigtramp on Mac OS X).
llvm-svn: 117256
if the address comes from a data section.
Fixed an issue that could occur when looking up a symbol that has a zero
byte size where no match would be returned even if there was an exact symbol
match.
Cleaned up the section dump output and added the section type into the output.
llvm-svn: 116017
whether a given register number is treated as volatile
or not for a given architecture/platform.
approx 450 lines of boilerplate, 50 lines of actual code. :)
llvm-svn: 114537
the parent of Process settings; add 'default-arch' as a
class-wide setting for Target. Replace lldb::GetDefaultArchitecture
with Target::GetDefaultArchitecture & Target::SetDefaultArchitecture.
Add 'use-external-editor' as user setting to Debugger class & update
code appropriately.
Add Error parameter to methods that get user settings, for easier
reporting of bad requests.
Fix various other minor related bugs.
Fix test cases to work with new changes.
llvm-svn: 114352
The Unwind and RegisterContext subclasses still need
to be finished; none of this code is used by lldb at
this point (unless you call into it by hand).
The ObjectFile class now has an UnwindTable object.
The UnwindTable object has a series of FuncUnwinders
objects (Function Unwinders) -- one for each function
in that ObjectFile we've backtraced through during this
debug session.
The FuncUnwinders object has a few different UnwindPlans.
UnwindPlans are a generic way of describing how to find
the canonical address of a given function's stack frame
(the CFA idea from DWARF/eh_frame) and how to restore the
caller frame's register values, if they have been saved
by this function.
UnwindPlans are created from different sources. One source is the
eh_frame exception handling information generated by the compiler
for unwinding an exception throw. Another source is an assembly
language inspection class (UnwindAssemblyProfiler, uses the Plugin
architecture) which looks at the instructions in the funciton
prologue and describes the stack movements/register saves that are
done.
Two additional types of UnwindPlans that are worth noting are
the "fast" stack UnwindPlan which is useful for making a first
pass over a thread's stack, determining how many stack frames there
are and retrieving the pc and CFA values for each frame (enough
to create StackFrameIDs). Only a minimal set of registers is
recovered during a fast stack walk.
The final UnwindPlan is an architectural default unwind plan.
These are provided by the ArchDefaultUnwindPlan class (which uses
the plugin architecture). When no symbol/function address range can
be found for a given pc value -- when we have no eh_frame information
and when we don't have a start address so we can't examine the assembly
language instrucitons -- we have to make a best guess about how to
unwind. That's when we use the architectural default UnwindPlan.
On x86_64, this would be to assume that rbp is used as a stack pointer
and we can use that to find the caller's frame pointer and pc value.
It's a last-ditch best guess about how to unwind out of a frame.
There are heuristics about when to use one UnwindPlan versues the other --
this will all happen in the still-begin-written UnwindLLDB subclass of
Unwind which runs the UnwindPlans.
llvm-svn: 113581
handles user settable internal variables (the equivalent of set/show
variables in gdb). In addition to the basic infrastructure (most of
which is defined in UserSettingsController.{h,cpp}, there are examples
of two classes that have been set up to contain user settable
variables (the Debugger and Process classes). The 'settings' command
has been modified to be a command-subcommand structure, and the 'set',
'show' and 'append' commands have been moved into this sub-commabnd
structure. The old StateVariable class has been completely replaced
by this, and the state variable dictionary has been removed from the
Command Interpreter. Places that formerly accessed the state variable
mechanism have been modified to access the variables in this new
structure instead (checking the term-width; getting/checking the
prompt; etc.)
Variables are attached to classes; there are two basic "flavors" of
variables that can be set: "global" variables (static/class-wide), and
"instance" variables (one per instance of the class). The whole thing
has been set up so that any global or instance variable can be set at
any time (e.g. on start up, in your .lldbinit file), whether or not
any instances actually exist (there's a whole pending and default
values mechanism to help deal with that).
llvm-svn: 113041
Added extra logging for stepping.
Fixed an issue where cached stack frame data could be lost between runs when
the thread plans read a stack frame.
llvm-svn: 112973
This component is still at an early stage, but allows for simple
breakpoint/step-over operations and basic process control.
The makefiles are set up to build the plugin under Linux only.
llvm-svn: 109318
enabled LLVM make style building and made this compile LLDB on Mac OS X. We
can now iterate on this to make the build work on both linux and macosx.
llvm-svn: 108009
Greg Clayton