Splitting basic blocks into multiple statements if there are now
additional scalar dependencies gives more freedom to the scheduler, but
more statements also means higher compile-time complexity. Switch to
finer statement granularity, the additional compile time should be
limited by the number of operations quota.
The regression tests are written for the -polly-stmt-granularity=bb
setting, therefore we add that flag to those tests that break with the
new default. Some of the tests only fail because the statements are
named differently due to a basic block resulting in multiple statements,
but which are removed during simplification of statements without
side-effects. Previous commits tried to reduce this effect, but it is
not completely avoidable.
Differential Revision: https://reviews.llvm.org/D42151
llvm-svn: 324169
Do not add a "_last" suffix to the statement name if there is no (other)
main statement for a basic block. In other words, it becomes the main
statement itself. This further reduces the statement naming difference
between -polly-stmt-granularity=bb and
-polly-stmt-granularity=scalar-indep.
llvm-svn: 324168
Summary:
This change is step four in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API.
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead.
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
Reviewers: jdoerfert, grosser, bollu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41677
llvm-svn: 323618
Theoretically, a PHI write can be added to any statement that represents
the incoming basic block. We previously always chose the last because
the incoming value's definition is guaranteed to be defined.
With this patch the PHI write is added to the statement that defines the
incoming value. It avoids the requirement for a scalar dependency between
the defining statement and the statement containing the write. As such the
logic for -polly-stmt-granularity=scalar-indep that ensures that there is
such scalar dependencies can be removed.
Differential Revision: https://reviews.llvm.org/D42147
llvm-svn: 323284
VirtualUse::create is only called for MemoryKind::Value, but its
consistency nonetheless checked in verifyUses(). PHI uses are always
inter-stmt dependencies, which was not considered by the constructor
method. The virtual and non-virtual execution paths were the same, such
that verifyUses did not encounter any inconsistencies.
llvm-svn: 323283
except Darwin and Windows. This prevents inserting an environment
variable with an empty name (which is illegal and leads to a Python
exception) on any of the BSDs.
llvm-svn: 323041
Summary:
Upstream LLVM is changing the the prototypes of the @llvm.memcpy/memmove/memset
intrinsics. This change updates the polly tests for this change.
The @llvm.memcpy/memmove/memset intrinsics currently have an explicit argument
which is required to be a constant integer. It represents the alignment of the
dest (and source), and so must be the minimum of the actual alignment of the
two.
This change removes the alignment argument in favour of placing the alignment
attribute on the source and destination pointers of the memory intrinsic call.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 100, i32 4, i1 false)
will now read
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 4 %dest, i8* align 4 %src, i32 100, i1 false)
At this time the source and destination alignments must be the same (Step 1).
Step 2 of the change, to be landed shortly, will relax that contraint and allow
the source and destination to have different alignments.
llvm-svn: 322963
The goal is to have -polly-stmt-granularity=bb and
-polly-stmt-granularity=scalar-indep to have the same names if there is
just one statement per basic block.
This fixes a fluke when Polybench's jacobi-2d is optimized differently
depending on the -polly-stmt-granularity option, although both options
create the same SCoP, just with different statement names.
The new naming scheme is:
With -polly-use-llvm-names=0:
Stmt<BBIdx as decimal><Idx within BB as letter>
With -polly-use-llvm-names=1:
Stmt_BBName_<Idx within BB as letter>
The <Idx within BB> suffix is omitted for the main statement of a BB. The
main statement is either the one containing the first store or call
(those cannot be removed by the simplifyer), or if there is no such
instruction, the first. If after simplification there is just a single
statement left, it should be the main statement and have the same names as
with -polly-stmt-granularity=bb.
Differential Revision: https://reviews.llvm.org/D42136
llvm-svn: 322852
This will give control of the statement's name to the caller.
Required to give -polly-stmt-granularity=scalar-indep more control
over the name of the generated statement in a follow-up commit.
llvm-svn: 322851
isl_val_get_num_si crashes on overflow, so don't use it on arbitrary
integers.
Testcase only crashes on platforms where long is 32 bits because of the
signature of isl_val_get_num_si; not sure if it's possible to write a
testcase which crashes if long is 64 bits.
There are a few other places in polly which use isl_val_get_num_si;
they probably need to be fixed as well. I don't think polly uses any
of the other "long" isl APIs in an unsafe manner.
Differential Revision: https://reviews.llvm.org/D42129
llvm-svn: 322766
Print same or similar structure elements together. Previously, the
value could take more importance that the space structure if visited
first in the space nest tree.
Before:
{
Left[0] -> Right[i]: i >= 0;
Left[1] -> AnotherRight[i];
Left[2] -> Right[-1]
}
After:
{
Left[0] -> Right[i]: i >= 0;
Left[2] -> Right[-1];
Left[1] -> AnotherRight[i]
}
llvm-svn: 322581
CMake insists that for each target, one uses only the non-keyword
version of target_link_library
target_link_library(mytarget lib)
or the one with PUBLIC/PRIVATE/INTERFACE keyword:
target_link_library(mytarget PUBLIC lib)
Otherwise, CMake fails with the error message:
The keyword signature for target_link_libraries has already been used with
the target "mytarget". All uses of target_link_libraries with a target
must be either all-keyword or all-plain.
Change all occurances of target_link_library to the newer keyworded
version to avoid such errors. Some already have been changed in r319840,
but might not be sufficient for all build configurations to build
the doxygen manual.
Reported-by: Tanya Lattner <tanyalattner@llvm.org>
llvm-svn: 322376
Memory transfer instructions take two pointers. It is not defined to
which of those a noalias annotation applies. To ensure correctness,
do not add noalias annotations to memcpy/memmove instructions anymore.
The caused a miscompile with test-suite's MultiSource/Applications/obsequi.
Since r321138, the MemCpyOpt pass would remove memcpy/memmove calls if
known to copy uninitialized memory. In that case, it was initialized
by another memcpy, but the annotation for the target pointer said
it would not alias. The annotation was actually meant for the source
pointer, which was was an alloca and could not alias with the target
pointer.
llvm-svn: 321371
If an out-of-quota error occurred, the last error would be
isl_error_quota unless a different error occured. We typically check
whether the max-operations occured by comparing to that error value
after leaving the quota guard. This would check whether there ever
was a quota-error, not just in the last quota guards.
The observable bug occurred if the max-operations limit was reached in
DeLICM, and if -polly-dependences-computout=0, DependenceInfo would
think that the quota for computing dependencies was the reason,
i.e., fail the operation even if the calculation itself was successful.
Fix by reseting the last error to isl_error_none when entering a
quota guard, signaling that no quota error occured unless in the
guard's scope.
llvm-svn: 321329
We currently use target_link_libraries without an explicit scope
specifier (INTERFACE, PRIVATE or PUBLIC) when linking executables.
Dependencies added in this way apply to both the target and its
dependencies, i.e. they become part of the executable's link interface
and are transitive.
Transitive dependencies generally don't make sense for executables,
since you wouldn't normally be linking against an executable. This also
causes issues for generating install export files when using
LLVM_DISTRIBUTION_COMPONENTS. For example, clang has a lot of LLVM
library dependencies, which are currently added as interface
dependencies. If clang is in the distribution components but the LLVM
libraries it depends on aren't (which is a perfectly legitimate use case
if the LLVM libraries are being built static and there are therefore no
run-time dependencies on them), CMake will complain about the LLVM
libraries not being in export set when attempting to generate the
install export file for clang. This is reasonable behavior on CMake's
part, and the right thing is for LLVM's build system to explicitly use
PRIVATE dependencies for executables.
Unfortunately, CMake doesn't allow you to mix and match the keyword and
non-keyword target_link_libraries signatures for a single target; i.e.,
if a single call to target_link_libraries for a particular target uses
one of the INTERFACE, PRIVATE, or PUBLIC keywords, all other calls must
also be updated to use those keywords. This means we must do this change
in a single shot. I also fully expect to have missed some instances; I
tested by enabling all the projects in the monorepo (except dragonegg),
and configuring both with and without shared libraries, on both Darwin
and Linux, but I'm planning to rely on the buildbots for other
configurations (since it should be pretty easy to fix those).
Even after this change, we still have a lot of target_link_libraries
calls that don't specify a scope keyword, mostly for shared libraries.
I'm thinking about addressing those in a follow-up, but that's a
separate change IMO.
Differential Revision: https://reviews.llvm.org/D40823
llvm-svn: 319840
Summary:
This can be seen as a follow-up on my previous differential [D33411](https://reviews.llvm.org/D33411).
We received a bug report where this error was triggered. I have tried my best to recreate the issue in a minimal lit testcase which is also part of this differential.
I only handle return instructions as predecessors to a virtual TLR-exit right now. From inspecting the codebase, it seems `unreachable` instructions may also be of interest here. If requested, I can extend my patches to consider them as well. I would also apply this on `ScopHelper.cpp::isErrorBlock` (see D33411), of course.
Reviewers: philip.pfaffe, bollu
Reviewed By: bollu
Subscribers: Meinersbur, pollydev, llvm-commits
Tags: #polly
Differential Revision: https://reviews.llvm.org/D40492
llvm-svn: 319431
Summary: We want to automatically copy the appropriate mailing list
for review requests to the polly repository.
For context, see the proposal and discussion here:
http://lists.llvm.org/pipermail/cfe-dev/2017-November/056032.html
Similar to D40179, I set up a new Diffusion repository with callsign
"PLO" for polly:
https://reviews.llvm.org/source/polly/
This explicitly updates polly's .arcconfig to point to the new C
repository in Diffusion, which will let us use Herald rule H270.
llvm-svn: 319056
Isl does not allow generating isl_ast_expr from an isl_pw_aff that has an
empty domain (i.e. has no pieces). We already detected the case if the
isl_pw_aff comes with an empty domain.
isl_ast_build also considers the domain empty if it is disjoint with the
parameter context (e.g. parameters values that we exclude by runtime
versioning).
Intersect the access relation domain with the parameter context to
also detect such practically empty access domains. The effective
pointer used in the generated code is unimportand because it will never
be executed.
This fixes llvm.org/PR35362
llvm-svn: 318806
Summary:
Most changes are mechanical, but in one place I changed the program semantics
by fixing a likely bug:
In `Scop::hasFeasibleRuntimeContext()`, I'm now explicitely handling the
error-case. Before, when the call to `addNonEmptyDomainConstraints()`
returned a null set, this (probably) accidentally worked because
isl_bool_error converts to true. I'm checking for nullptr now.
Reviewers: grosser, Meinersbur, bollu
Reviewed By: Meinersbur
Subscribers: nemanjai, kbarton, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D39971
llvm-svn: 318632
Summary:
There is a potential use-after-free bug in Scop::buildSchedule(Region *,
LoopStackTy &, LoopInfo &). Before, we took a reference to LoopStack.back()
which is a use after free, since back is popped off further below. This didn't
crash before by pure chance, since LoopStack is actually a vector, and the
memory isn't freed upon pop. I turned this into an iterator-based algorithm.
Reviewers: grosser, bollu, Meinersbur
Reviewed By: Meinersbur
Subscribers: llvm-commits, pollydev
Differential Revision: https://reviews.llvm.org/D39979
llvm-svn: 318415
Put the analysis part of reloadKnownContent under an isl
max-operations quota scope, as has already been done for
forwardKnownLoad.
This should fix the aosp timeout of "GrTestUtils.cpp".
llvm-svn: 317495
Represent PHIs by their incoming values instead of an opaque value of
themselves. This allows ForwardOpTree to "look through" the PHIs and
forward the incoming values since forwardings PHIs is currently not
supported.
This is particularly useful to cope with PHIs inserted by GVN LoadPRE.
The incoming values all resolve to a load from a single array element
which then can be forwarded.
It should in theory also reduce spurious conflicts in value mapping
(DeLICM), but I have not yet found a profitable case yet, so it is
not included here.
To avoid transitive closure and potentially necessary overapproximations
of those, PHIs that may reference themselves are excluded from
normalization and keep their opaque self-representation.
Differential Revision: https://reviews.llvm.org/D39333
llvm-svn: 317008
ForwardOpTree may already transform a scalar access to an array
accesses. The access remains implicit (isOriginalScalarKind(), meaning
that the access is always executed at the begin/end of a statement), but
targets an array (isLatestArrayKind(), which is unrelated to whether the
execution is implicit/explicit).
Fix by properly using isOriginalXXX() to determine execution order.
This fixes the buildbots on MultiSource/Benchmarks/DOE-ProxyApps-C/miniGMG.
llvm-svn: 316995
When collecting base pointers that need to be made available in parallel
subfunctions, use the base pointer associated with the latest
ScopArrayInfo, instead of the original one.
llvm-svn: 316983
Summary:
When GPUNodeBuilder creates loops inside the kernel, it dispatches to
IslNodeBuilder. This however is surprisingly dangerous, since it accesses the
AST Node's user through the wrong type. This patch fixes this problem by
overriding createFor correctly.
This fixes PR35010.
Reviewers: grosser, bollu, Meinersbur
Reviewed By: Meinersbur
Subscribers: Meinersbur, nemanjai, pollydev, llvm-commits, kbarton
Differential Revision: https://reviews.llvm.org/D39364
llvm-svn: 316872
Add missing %loadPolly directive to support out of tree builds. One of
the changes is somewhat bigger, because the directive turns on LLVM
names, and the testcase deosn't use those.
llvm-svn: 316870
For scalar accesses, change the access target to an array element that
is known to contain the same value.
This may become an alternative to forwardKnownLoad which creates new
loads (and therefore closer to forwarding speculatives). Reloading does
not require the known value originating from a load, but can be a store
as well.
Differential Revision: https://reviews.llvm.org/D39325
llvm-svn: 316766
Previously we marked scalars based on the original access function. However,
when a scalar read access is redirected, the original definition
(or incoming values of a PHI) is not used anymore, and can be deleted
(unless referenced by use that has not been redirected).
llvm-svn: 316660
Michael Kruse