inline contexts when the deepest most block is not inlined.
Added source path remappings to the lldb_private::Target class that allow it
to remap paths found in debug info so we can find source files that are elsewhere
on the current system.
Fixed disassembly by function name to disassemble inline functions that are
inside other functions much better and to show enough context before the
disassembly output so you can tell where things came from.
Added the ability to get more than one address range from a SymbolContext
class for the case where a block or function has discontiguous address ranges.
llvm-svn: 130044
the CommandInterpreter where it was always being used.
Make sure that Modules can track their object file offsets correctly to
allow opening of sub object files (like the "__commpage" on darwin).
Modified the Platforms to be able to launch processes. The first part of this
move is the platform soon will become the entity that launches your program
and when it does, it uses a new ProcessLaunchInfo class which encapsulates
all process launching settings. This simplifies the internal APIs needed for
launching. I want to slowly phase out process launching from the process
classes, so for now we can still launch just as we used to, but eventually
the platform is the object that should do the launching.
Modified the Host::LaunchProcess in the MacOSX Host.mm to correctly be able
to launch processes with all of the new eLaunchFlag settings. Modified any
code that was manually launching processes to use the Host::LaunchProcess
functions.
Fixed an issue where lldb_private::Args had implicitly defined copy
constructors that could do the wrong thing. This has now been fixed by adding
an appropriate copy constructor and assignment operator.
Make sure we don't add empty ModuleSP entries to a module list.
Fixed the commpage module creation on MacOSX, but we still need to train
the MacOSX dynamic loader to not get rid of it when it doesn't have an entry
in the all image infos.
Abstracted many more calls from in ProcessGDBRemote down into the
GDBRemoteCommunicationClient subclass to make the classes cleaner and more
efficient.
Fixed the default iOS ARM register context to be correct and also added support
for targets that don't support the qThreadStopInfo packet by selecting the
current thread (only if needed) and then sending a stop reply packet.
Debugserver can now start up with a --unix-socket (-u for short) and can
then bind to port zero and send the port it bound to to a listening process
on the other end. This allows the GDB remote platform to spawn new GDB server
instances (debugserver) to allow platform debugging.
llvm-svn: 129351
Something changed in commit r129112 where a few standard headers vanished from
the include chain when building on Linux. Fix up by including limits.h for
INT_MAX and PATH_MAX where needed, and stdio.h for printf().
llvm-svn: 129130
event.
Modified the ProcessInfo structure to contain all process arguments. Using the
new function calls on MacOSX allows us to see the full process name, not just
the first 16 characters.
Added a new platform command: "platform process info <pid> [<pid> <pid> ...]"
that can be used to get detailed information for a process including all
arguments, user and group info and more.
llvm-svn: 128694
class now implements the Host functionality for a lot of things that make
sense by default so that subclasses can check:
int
PlatformSubclass::Foo ()
{
if (IsHost())
return Platform::Foo (); // Let the platform base class do the host specific stuff
// Platform subclass specific code...
int result = ...
return result;
}
Added new functions to the platform:
virtual const char *Platform::GetUserName (uint32_t uid);
virtual const char *Platform::GetGroupName (uint32_t gid);
The user and group names are cached locally so that remote platforms can avoid
sending packets multiple times to resolve this information.
Added the parent process ID to the ProcessInfo class.
Added a new ProcessInfoMatch class which helps us to match processes up
and changed the Host layer over to using this new class. The new class allows
us to search for processs:
1 - by name (equal to, starts with, ends with, contains, and regex)
2 - by pid
3 - And further check for parent pid == value, uid == value, gid == value,
euid == value, egid == value, arch == value, parent == value.
This is all hookup up to the "platform process list" command which required
adding dumping routines to dump process information. If the Host class
implements the process lookup routines, you can now lists processes on
your local machine:
machine1.foo.com % lldb
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
94727 244 username usergroup username usergroup x86_64-apple-darwin Xcode
92742 92710 username usergroup username usergroup i386-apple-darwin debugserver
This of course also works remotely with the lldb-platform:
machine1.foo.com % lldb-platform --listen 1234
machine2.foo.com % lldb
(lldb) platform create remote-macosx
Platform: remote-macosx
Connected: no
(lldb) platform connect connect://localhost:1444
Platform: remote-macosx
Triple: x86_64-apple-darwin
OS Version: 10.6.7 (10J869)
Kernel: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
Hostname: machine1.foo.com
Connected: yes
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99556 244 username usergroup username usergroup x86_64-apple-darwin trustevaluation
99548 65539 username usergroup username usergroup x86_64-apple-darwin lldb
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
The lldb-platform implements everything with the Host:: layer, so this should
"just work" for linux. I will probably be adding more stuff to the Host layer
for launching processes and attaching to processes so that this support should
eventually just work as well.
Modified the target to be able to be created with an architecture that differs
from the main executable. This is needed for iOS debugging since we can have
an "armv6" binary which can run on an "armv7" machine, so we want to be able
to do:
% lldb
(lldb) platform create remote-ios
(lldb) file --arch armv7 a.out
Where "a.out" is an armv6 executable. The platform then can correctly decide
to open all "armv7" images for all dependent shared libraries.
Modified the disassembly to show the current PC value. Example output:
(lldb) disassemble --frame
a.out`main:
0x1eb7: pushl %ebp
0x1eb8: movl %esp, %ebp
0x1eba: pushl %ebx
0x1ebb: subl $20, %esp
0x1ebe: calll 0x1ec3 ; main + 12 at test.c:18
0x1ec3: popl %ebx
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
0x1edb: leal 213(%ebx), %eax
0x1ee1: movl %eax, (%esp)
0x1ee4: calll 0x1f1e ; puts
0x1ee9: calll 0x1f0c ; getchar
0x1eee: movl $20, (%esp)
0x1ef5: calll 0x1e6a ; sleep_loop at test.c:6
0x1efa: movl $12, %eax
0x1eff: addl $20, %esp
0x1f02: popl %ebx
0x1f03: leave
0x1f04: ret
This can be handy when dealing with the new --line options that was recently
added:
(lldb) disassemble --line
a.out`main + 13 at test.c:19
18 {
-> 19 printf("Process: %i\n\n", getpid());
20 puts("Press any key to continue..."); getchar();
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
Modified the ModuleList to have a lookup based solely on a UUID. Since the
UUID is typically the MD5 checksum of a binary image, there is no need
to give the path and architecture when searching for a pre-existing
image in an image list.
Now that we support remote debugging a bit better, our lldb_private::Module
needs to be able to track what the original path for file was as the platform
knows it, as well as where the file is locally. The module has the two
following functions to retrieve both paths:
const FileSpec &Module::GetFileSpec () const;
const FileSpec &Module::GetPlatformFileSpec () const;
llvm-svn: 128563
public types and public enums. This was done to keep the SWIG stuff from
parsing all sorts of enums and types that weren't needed, and allows us to
abstract our API better.
llvm-svn: 128239
On Mac OS X we now have 3 platforms:
PlatformDarwin - must be subclassed to fill in the missing pure virtual funcs
but this implements all the common functionality between
remote-macosx and remote-ios. It also allows for another
platform to be used (remote-gdb-server for now) when doing
remote connections. Keeping this pluggable will allow for
flexibility.
PlatformMacOSX - Now implements both local and remote macosx desktop platforms.
PlatformRemoteiOS - Remote only iOS that knows how to locate SDK files in the
cached SDK locations on the host.
A new agnostic platform has been created:
PlatformRemoteGDBServer - this implements the platform using the GDB remote
protocol and uses the built in lldb_private::Host
static functions to implement many queries.
llvm-svn: 128193
platform status -- gets status information for the selected platform
platform create <platform-name> -- creates a new instance of a remote platform
platform list -- list all available platforms
platform select -- select a platform instance as the current platform (not working yet)
When using "platform create" it will create a remote platform and make it the
selected platform. For instances for iPhone OS debugging on Mac OS X one can
do:
(lldb) platform create remote-ios --sdk-version=4.0
Remote platform: iOS platform
SDK version: 4.0
SDK path: "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0"
Not connected to a remote device.
(lldb) file ~/Documents/a.out
Current executable set to '~/Documents/a.out' (armv6).
(lldb) image list
[ 0] /Volumes/work/gclayton/Documents/devb/attach/a.out
[ 1] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/dyld
[ 2] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/libSystem.B.dylib
Note that this is all happening prior to running _or_ connecting to a remote
platform. Once connected to a remote platform the OS version might change which
means we will need to update our dependecies. Also once we run, we will need
to match up the actualy binaries with the actualy UUID's to files in the
SDK, or download and cache them locally.
This is just the start of the remote platforms, but this modification is the
first iteration in getting the platforms really doing something.
llvm-svn: 127934
an interface to a local or remote debugging platform. By default each host OS
that supports LLDB should be registering a "default" platform that will be
used unless a new platform is selected. Platforms are responsible for things
such as:
- getting process information by name or by processs ID
- finding platform files. This is useful for remote debugging where there is
an SDK with files that might already or need to be cached for debug access.
- getting a list of platform supported architectures in the exact order they
should be selected. This helps the native x86 platform on MacOSX select the
correct x86_64/i386 slice from universal binaries.
- Connect to remote platforms for remote debugging
- Resolving an executable including finding an executable inside platform
specific bundles (macosx uses .app bundles that contain files) and also
selecting the appropriate slice of universal files for a given platform.
So by default there is always a local platform, but remote platforms can be
connected to. I will soon be adding a new "platform" command that will support
the following commands:
(lldb) platform connect --name machine1 macosx connect://host:port
Connected to "machine1" platform.
(lldb) platform disconnect macosx
This allows LLDB to be well setup to do remote debugging and also once
connected process listing and finding for things like:
(lldb) process attach --name x<TAB>
The currently selected platform plug-in can now auto complete any available
processes that start with "x". The responsibilities for the platform plug-in
will soon grow and expand.
llvm-svn: 127286
Previously we were using a set of preprocessor defines and returning an ArchSpec
without any OS/Vendor information. This fixes an issue with plugin resolution
on Linux where a valid OS component is needed.
llvm-svn: 126404
of Stephen Wilson's idea (thanks for the input Stephen!). What I ended up
doing was:
- Got rid of ArchSpec::CPU (which was a generic CPU enumeration that mimics
the contents of llvm::Triple::ArchType). We now rely upon the llvm::Triple
to give us the machine type from llvm::Triple::ArchType.
- There is a new ArchSpec::Core definition which further qualifies the CPU
core we are dealing with into a single enumeration. If you need support for
a new Core and want to debug it in LLDB, it must be added to this list. In
the future we can allow for dynamic core registration, but for now it is
hard coded.
- The ArchSpec can now be initialized with a llvm::Triple or with a C string
that represents the triple (it can just be an arch still like "i386").
- The ArchSpec can still initialize itself with a architecture type -- mach-o
with cpu type and subtype, or ELF with e_machine + e_flags -- and this will
then get translated into the internal llvm::Triple::ArchSpec + ArchSpec::Core.
The mach-o cpu type and subtype can be accessed using the getter functions:
uint32_t
ArchSpec::GetMachOCPUType () const;
uint32_t
ArchSpec::GetMachOCPUSubType () const;
But these functions are just converting out internal llvm::Triple::ArchSpec
+ ArchSpec::Core back into mach-o. Same goes for ELF.
All code has been updated to deal with the changes.
This should abstract us until later when the llvm::TargetSpec stuff gets
finalized and we can then adopt it.
llvm-svn: 126278
it should live and the lldb_private::Process takes care of managing the
auto pointer to the dynamic loader instance.
Also, now that the ArchSpec contains the target triple, we are able to
correctly set the Target architecture in DidLaunch/DidAttach in the subclasses,
and then the lldb_private::Process will find the dynamic loader plug-in
by letting the dynamic loader plug-ins inspect the arch/triple in the target.
So now the ProcessGDBRemote plug-in is another step closer to be purely
process/platform agnostic.
I updated the ProcessMacOSX and the ProcessLinux plug-ins accordingly.
llvm-svn: 125650
now, in addition to cpu type/subtype and architecture flavor, contains:
- byte order (big endian, little endian)
- address size in bytes
- llvm::Triple for true target triple support and for more powerful plug-in
selection.
llvm-svn: 125602
the lldb/source/Host/*.cpp and lldb/source/Host/*/*.cpp directories. The only
offenders are the command completion and the StreamFile.cpp.
I will soon modify StreamFile.cpp to use a lldb/source/Host/File.cpp so that
all file open, close, read, write, seek, are abstracted into the host layer
as well, then this will be gone.
llvm-svn: 125082
flags such that symbols can be searched for within a shared library if desired.
Platforms that support the RTLD_FIRST flag can still take advantage of their
quicker lookups, and other platforms can still get the same fucntionality
with a little extra work.
Also changed LLDB_CONFIG flags over to either being defined, or not being
defined to stay in line with current open source practices and to prepare for
using autoconf or cmake to configure LLDB builds.
llvm-svn: 125064
where the implementation is hidden in the host layer. This avoids
a slew of "#if LLDB_CONFIG_TERMIOS_SUPPORTED" statements in the
code and keeps things cleaner.
llvm-svn: 125057
(lldb) process connect <remote-url>
Currently when you specify a file with the file command it helps us to find
a process plug-in that is suitable for debugging. If you specify a file you
can rely upon this to find the correct debugger plug-in:
% lldb a.out
Current executable set to 'a.out' (x86_64).
(lldb) process connect connect://localhost:2345
...
If you don't specify a file, you will need to specify the plug-in name that
you wish to use:
% lldb
(lldb) process connect --plugin process.gdb-remote connect://localhost:2345
Other connection URL examples:
(lldb) process connect connect://localhost:2345
(lldb) process connect tcp://127.0.0.1
(lldb) process connect file:///dev/ttyS1
We are currently treating the "connect://host:port" as a way to do raw socket
connections. If there is a URL for this already, please let me know and we
will adopt it.
So now you can connect to a remote debug server with the ProcessGDBRemote
plug-in. After connection, it will ask for the pid info using the "qC" packet
and if it responds with a valid process ID, it will be equivalent to attaching.
If it response with an error or invalid process ID, the LLDB process will be
in a new state: eStateConnected. This allows us to then download a program or
specify the program to run (using the 'A' packet), or specify a process to
attach to (using the "vAttach" packets), or query info about the processes
that might be available.
llvm-svn: 124846
LLDB plugin directory and a user LLDB plugin directory. We currently still
need to work out at what layer the plug-ins will be, but at least we are
prepared for plug-ins. Plug-ins will attempt to be loaded from the
"/Developer/Library/PrivateFrameworks/LLDB.framework/Resources/Plugins"
folder, and from the "~/Library/Application Support/LLDB/Plugins" folder on
MacOSX. Each plugin will be scanned for:
extern "C" bool LLDBPluginInitialize(void);
extern "C" void LLDBPluginTerminate(void);
If at least LLDBPluginInitialize is found, the plug-in will be loaded. The
LLDBPluginInitialize function returns a bool that indicates if the plug-in
should stay loaded or not (plug-ins might check the current OS, current
hardware, or anything else and determine they don't want to run on the current
host). The plug-in is uniqued by path and added to a static loaded plug-in
map. The plug-in scanning happens during "lldb_private::Initialize()" which
calls to the PluginManager::Initialize() function. Likewise with termination
lldb_private::Terminate() calls PluginManager::Terminate(). The paths for the
plug-in directories is fetched through new Host calls:
bool Host::GetLLDBPath (ePathTypeLLDBSystemPlugins, dir_spec);
bool Host::GetLLDBPath (ePathTypeLLDBUserPlugins, dir_spec);
This way linux and other systems can define their own appropriate locations
for plug-ins to be loaded.
To allow dynamic shared library loading, the Host layer has also been modified
to include shared library open, close and get symbol:
static void *
Host::DynamicLibraryOpen (const FileSpec &file_spec,
Error &error);
static Error
Host::DynamicLibraryClose (void *dynamic_library_handle);
static void *
Host::DynamicLibraryGetSymbol (void *dynamic_library_handle,
const char *symbol_name,
Error &error);
lldb_private::FileSpec also has been modified to support directory enumeration
in an attempt to abstract the directory enumeration into one spot in the code.
The directory enumertion function is static and takes a callback:
typedef enum EnumerateDirectoryResult
{
eEnumerateDirectoryResultNext, // Enumerate next entry in the current directory
eEnumerateDirectoryResultEnter, // Recurse into the current entry if it is a directory or symlink, or next if not
eEnumerateDirectoryResultExit, // Exit from the current directory at the current level.
eEnumerateDirectoryResultQuit // Stop directory enumerations at any level
};
typedef FileSpec::EnumerateDirectoryResult (*EnumerateDirectoryCallbackType) (void *baton,
FileSpec::FileType file_type,
const FileSpec &spec);
static FileSpec::EnumerateDirectoryResult
FileSpec::EnumerateDirectory (const char *dir_path,
bool find_directories,
bool find_files,
bool find_other,
EnumerateDirectoryCallbackType callback,
void *callback_baton);
This allow clients to specify the directory to search, and specifies if only
files, directories or other (pipe, symlink, fifo, etc) files will cause the
callback to be called. The callback also gets to return with the action that
should be performed after this directory entry. eEnumerateDirectoryResultNext
specifies to continue enumerating through a directory with the next entry.
eEnumerateDirectoryResultEnter specifies to recurse down into a directory
entry, or if the file is not a directory or symlink/alias to a directory, then
just iterate to the next entry. eEnumerateDirectoryResultExit specifies to
exit the current directory and skip any entries that might be remaining, yet
continue enumerating to the next entry in the parent directory. And finally
eEnumerateDirectoryResultQuit means to abort all directory enumerations at
all levels.
Modified the Declaration class to not include column information currently
since we don't have any compilers that currently support column based
declaration information. Columns support can be re-enabled with the
additions of a #define.
Added the ability to find an EmulateInstruction plug-in given a target triple
and optional plug-in name in the plug-in manager.
Fixed a few cases where opendir/readdir was being used, but yet not closedir
was being used. Soon these will be deprecated in favor of the new directory
enumeration call that was added to the FileSpec class.
llvm-svn: 124716
takes separate file handles for stdin, stdout, and stder and also allows for
the working directory to be specified.
Added support to "process launch" to a new option: --working-dir=PATH. We
can now set the working directory. If this is not set, it defaults to that
of the process that has LLDB loaded. Added the working directory to the
host LaunchInNewTerminal function to allows the current working directory
to be set in processes that are spawned in their own terminal. Also hooked this
up to the lldb_private::Process and all mac plug-ins. The linux plug-in had its
API changed, but nothing is making use of it yet. Modfied "debugserver" and
"darwin-debug" to also handle the current working directory options and modified
the code in LLDB that spawns these tools to pass the info along.
Fixed ProcessGDBRemote to properly pass along all file handles for stdin, stdout
and stderr.
After clearing the default values for the stdin/out/err file handles for
process to be NULL, we had a crasher in UserSettingsController::UpdateStringVariable
which is now fixed. Also fixed the setting of boolean values to be able to
be set as "true", "yes", "on", "1" for true (case insensitive) and "false", "no",
"off", or "0" for false.
Fixed debugserver to properly handle files for STDIN, STDOUT and STDERR that are not
already opened. Previous to this fix debugserver would only correctly open and dupe
file handles for the slave side of a pseudo terminal. It now correctly handles
getting STDIN for the inferior from a file, and spitting STDOUT and STDERR out to
files. Also made sure the file handles were correctly opened with the NOCTTY flag
for terminals.
llvm-svn: 124060
was done as an settings variable in the process for now. We will eventually
move all environment stuff over to the target, but we will leave it with the
process for now. The default setting is for a process to inherit the host
environment. This can be disabled by setting the "inherit-env" setting to
false in the process.
llvm-svn: 120862
an error saying the resume timed out. Previously the thread that was trying
to resume the process would eventually call ProcessGDBRemote::DoResume() which
would broadcast an event over to the async GDB remote thread which would sent the
continue packet to the remote gdb server. Right after this was sent, it would
set a predicate boolean value (protected by a mutex and condition) and then the
thread that issued the ProcessGDBRemote::DoResume() would then wait for that
condition variable to be set. If the async gdb thread was too quick though, the
predicate boolean value could have been set to true and back to false by the
time the thread that issued the ProcessGDBRemote::DoResume() checks the boolean
value. So we can't use the predicate value as a handshake. I have changed the code
over to using a Event by having the GDB remote communication object post an
event:
GDBRemoteCommunication::eBroadcastBitRunPacketSent
This allows reliable handshaking between the two threads and avoids the erroneous
ProcessGDBRemote::DoResume() errors.
Added a host backtrace service to allow in process backtraces when trying to track
down tricky issues. I need to see if LLVM has any backtracing abilities abstracted
in it already, and if so, use that, but I needed something ASAP for the current issue
I was working on. The static function is:
void
Host::Backtrace (Stream &strm, uint32_t max_frames);
And it will backtrace at most "max_frames" frames for the current thread and can be
used with any of the Stream subclasses for logging.
llvm-svn: 120793
comes from by using a virtual function to provide it from the Module's
SymbolVendor by default. This allows the DWARF parser, when being used to
parse DWARF in .o files with a parent DWARF + debug map parser, to get its
type list from the DWARF + debug map parser so when we go and find full
definitions for types (that might come from other .o files), we can use the
type list from the debug map parser. Otherwise we ended up mixing clang types
from one .o file (say a const pointer to a forward declaration "class A") with
the a full type from another .o file. This causes expression parsing, when
copying the clang types from those parsed by the DWARF parser into the
expression AST, to fail -- for good reason. Now all types are created in the
same list.
Also added host support for crash description strings that can be set before
doing a piece of work. On MacOSX, this ties in with CrashReporter support
that allows a string to be dispalyed when the app crashes and allows
LLDB.framework to print a description string in the crash log. Right now this
is hookup up the the CommandInterpreter::HandleCommand() where each command
notes that it is about to be executed, so if we crash while trying to do this
command, we should be able to see the command that caused LLDB to exit. For
all other platforms, this is a nop.
llvm-svn: 118672
the same architecture as a default program, the attach architecture auto
detection would change the architecture to the architecture of the darwin-debug
(which was always x86_64) and hose up your debug session.
llvm-svn: 118399
don't crash if we disable logging when some code already has a copy of the
logger. Prior to this fix, logs were handed out as pointers and if they were
held onto while a log got disabled, then it could cause a crash. Now all logs
are handed out as shared pointers so this problem shouldn't happen anymore.
We are also using our new shared pointers that put the shared pointer count
and the object into the same allocation for a tad better performance.
llvm-svn: 118319
than just the entire log channel.
Add checks, where appropriate, to make sure a log channel/category has
not been disabled before attempting to write to it.
llvm-svn: 117715
So the issue here was that we have lldb_private::FileSpec that by default was
always resolving a path when using the:
FileSpec::FileSpec (const char *path);
and in the:
void FileSpec::SetFile(const char *pathname, bool resolve = true);
This isn't what we want in many many cases. One example is you have "/tmp" on
your file system which is really "/private/tmp". You compile code in that
directory and end up with debug info that mentions "/tmp/file.c". Then you
type:
(lldb) breakpoint set --file file.c --line 5
If your current working directory is "/tmp", then "file.c" would be turned
into "/private/tmp/file.c" which won't match anything in the debug info.
Also, it should have been just a FileSpec with no directory and a filename
of "file.c" which could (and should) potentially match any instances of "file.c"
in the debug info.
So I removed the constructor that just takes a path:
FileSpec::FileSpec (const char *path); // REMOVED
You must now use the other constructor that has a "bool resolve" parameter that you must always supply:
FileSpec::FileSpec (const char *path, bool resolve);
I also removed the default parameter to SetFile():
void FileSpec::SetFile(const char *pathname, bool resolve);
And fixed all of the code to use the right settings.
llvm-svn: 116944
optionally specify the tty you want to use if you want to use an existing
terminal window by giving a partial or full path name:
(lldb) process launch --tty=ttys002
This would find the terminal window (or tab on MacOSX) that has ttys002 in its
tty path and use it. If it isn't found, it will use a new terminal window.
llvm-svn: 116878
We now spawn a thread to accept a unix socket connection from the inferior
when it spawns in the terminal, then we launch the process, then we get
the pid back through the unix socket, and then wait for it to SIGSTOP.
darwin-debug now clears the terminal screen and prints out the program and
arguments that are about to be launched.
llvm-svn: 116841
sockets so the driver doesn't just crash.
Added support for connecting to named sockets (unix IPC sockets) in
ConnectionFileDescriptor.
Modified the Host::LaunchInNewTerminal() for MacOSX to return the process
ID of the inferior process instead of the process ID of the Terminal.app. This
was done by modifying the "darwin-debug" executable to connect to lldb through
a named unix socket which is passed down as an argument. This allows a quick
handshake between "lldb" and "darwin-debug" so we can get the process ID
of the inferior and then attach by process ID and avoid attaching to the
inferior by process name since there could be more than one process with
that name. This still has possible race conditions, those will be fixed
in the near future. This fixes the SIGPIPE issues that were sometimes being
seen when task_for_pid was failing.
llvm-svn: 116792
"vAttachName;<PROCNAME>" packet, and wait for a new process by name to launch
with the "vAttachWait;<PROCNAME>".
Fixed a few issues with attaching where if DoAttach() returned no error, yet
there was no valid process ID, we would deadlock waiting for an event that
would never happen.
Added a new "process launch" option "--tty" that will launch the process
in a new terminal if the Host layer supports the "Host::LaunchInNewTerminal(...)"
function. This currently works on MacOSX and will allow the debugging of
terminal applications that do complex operations with the terminal.
Cleaned up the output when the process resumes, stops and halts to be
consistent with the output format.
llvm-svn: 116693
static bool
Host::GetLLDBPath (lldb::PathType path_type, FileSpec &file_spec);
This will fill in "file_spec" with an appropriate path that is appropriate
for the current Host OS. MacOSX will return paths within the LLDB.framework,
and other unixes will return the paths they want. The current PathType
enums are:
typedef enum PathType
{
ePathTypeLLDBShlibDir, // The directory where the lldb.so (unix) or LLDB mach-o file in LLDB.framework (MacOSX) exists
ePathTypeSupportExecutableDir, // Find LLDB support executable directory (debugserver, etc)
ePathTypeHeaderDir, // Find LLDB header file directory
ePathTypePythonDir // Find Python modules (PYTHONPATH) directory
} PathType;
All places that were finding executables are and python paths are now updated
to use this Host call.
Added another new host call to launch the inferior in a terminal. This ability
will be very host specific and doesn't need to be supported on all systems.
MacOSX currently will create a new .command file and tell Terminal.app to open
the .command file. It also uses the new "darwin-debug" app which is a small
app that uses posix to exec (no fork) and stop at the entry point of the
program. The GDB remote plug-in is almost able launch a process and attach to
it, it currently will spawn the process, but it won't attach to it just yet.
This will let LLDB not have to share the terminal with another process and a
new terminal window will pop up when you launch. This won't get hooked up
until we work out all of the kinks. The new Host function is:
static lldb::pid_t
Host::LaunchInNewTerminal (
const char **argv, // argv[0] is executable
const char **envp,
const ArchSpec *arch_spec,
bool stop_at_entry,
bool disable_aslr);
Cleaned up FileSpec::GetPath to not use strncpy() as it was always zero
filling the entire path buffer.
Fixed an issue with the dynamic checker function where I missed a '$' prefix
that should have been added.
llvm-svn: 116690
Added the start of Host specific launch services, though it currently isn't
hookup up to anything. We want to be able to launch a process and use the
native launch services to launch an app like it would be launched by the
user double clicking on the app. We also eventually want to be able to run
a command line app in a newly spawned terminal to avoid terminal sharing.
Fixed an issue with the new DWARF forward type declaration stuff. A crasher
was found that was happening when trying to properly expand the forward
declarations.
llvm-svn: 115213
The Unwind and RegisterContext subclasses still need
to be finished; none of this code is used by lldb at
this point (unless you call into it by hand).
The ObjectFile class now has an UnwindTable object.
The UnwindTable object has a series of FuncUnwinders
objects (Function Unwinders) -- one for each function
in that ObjectFile we've backtraced through during this
debug session.
The FuncUnwinders object has a few different UnwindPlans.
UnwindPlans are a generic way of describing how to find
the canonical address of a given function's stack frame
(the CFA idea from DWARF/eh_frame) and how to restore the
caller frame's register values, if they have been saved
by this function.
UnwindPlans are created from different sources. One source is the
eh_frame exception handling information generated by the compiler
for unwinding an exception throw. Another source is an assembly
language inspection class (UnwindAssemblyProfiler, uses the Plugin
architecture) which looks at the instructions in the funciton
prologue and describes the stack movements/register saves that are
done.
Two additional types of UnwindPlans that are worth noting are
the "fast" stack UnwindPlan which is useful for making a first
pass over a thread's stack, determining how many stack frames there
are and retrieving the pc and CFA values for each frame (enough
to create StackFrameIDs). Only a minimal set of registers is
recovered during a fast stack walk.
The final UnwindPlan is an architectural default unwind plan.
These are provided by the ArchDefaultUnwindPlan class (which uses
the plugin architecture). When no symbol/function address range can
be found for a given pc value -- when we have no eh_frame information
and when we don't have a start address so we can't examine the assembly
language instrucitons -- we have to make a best guess about how to
unwind. That's when we use the architectural default UnwindPlan.
On x86_64, this would be to assume that rbp is used as a stack pointer
and we can use that to find the caller's frame pointer and pc value.
It's a last-ditch best guess about how to unwind out of a frame.
There are heuristics about when to use one UnwindPlan versues the other --
this will all happen in the still-begin-written UnwindLLDB subclass of
Unwind which runs the UnwindPlans.
llvm-svn: 113581
to spawn a thread for each process that is being monitored. Previously
LLDB would spawn a single thread that would wait for any child process which
isn't ok to do as a shared library (LLDB.framework on Mac OSX, or lldb.so on
linux). The old single thread used to call wait4() with a pid of -1 which
could cause it to reap child processes that it shouldn't have.
Re-wrote the way Function blocks are handles. Previously I attempted to keep
all blocks in a single memory allocation (in a std::vector). This made the
code somewhat efficient, but hard to work with. I got rid of the old BlockList
class, and went to a straight parent with children relationship. This new
approach will allow for partial parsing of the blocks within a function.
llvm-svn: 111706
Arrange that this then gets properly set on attach, or when a "file" is set.
Add a completer for "process attach -n".
Caveats: there isn't currently a way to handle multiple processes with the same name. That
will have to wait on a way to pass annotations along with the completion strings.
llvm-svn: 110624
ThreadCancel in Host::WillTerminate g_monitor_thread may be blocked on a call
to pthread_cond_wait (for example, line 640). Now, by default, when a
cancellation request is serviced g_monitor_thread will again own the mutex
guarding the condition variable it was waiting on. This causes the call to
SetValue in Host::WillTerminate to hit a deadlock.
The call to SetValue does not appear to be needed, so removing it solves
the issue.
Patch from Stephen Wilson.
llvm-svn: 109228
defines that are in "llvm/Support/MachO.h". This should allow ObjectFileMachO
and ObjectContainerUniversalMachO to be able to be cross compiled in Linux.
Also did some cleanup on the ASTType by renaming it to ClangASTType and
renaming the header file. Moved a lot of "AST * + opaque clang type *"
functionality from lldb_private::Type over into ClangASTType.
llvm-svn: 109046
enabled LLVM make style building and made this compile LLDB on Mac OS X. We
can now iterate on this to make the build work on both linux and macosx.
llvm-svn: 108009
type and sub-type, or an ELF e_machine value. Also added a generic CPU type
to the arch spec class so we can have a single arch definition that the LLDB
core code can use. Previously a lot of places in the code were using the
mach-o definitions from a macosx header file.
Switches over to using "llvm/Support/MachO.h" for the llvm::MachO::XXX for the
CPU types and sub types for mach-o ArchSpecs. Added "llvm/Support/ELF.h" so
we can use the "llvm::ELF::XXX" defines for the ELF ArchSpecs.
Got rid of all CPU_TYPE_ and CPU_SUBTYPE_ defines that were previously being
used in LLDB.
llvm-svn: 105806
Johnny Chen