This uses a single cast and test to get the section for the symbol, and
uses the cast_or_null<> pattern throughout to handle the known type but
unknown non-null-ness.
No functionality changed.
Differential Revision: http://reviews.llvm.org/D10791
llvm-svn: 241000
This function is actually *very* hot. It is hard to see currently
because the call graph is very recursive, but I'm working to remove that
and when I do this function becomes significantly higher on the profile
(up to 5%!) and so worth avoiding the call overhead.
No specific perf gain I can measure yet (below the noise), but likely to
have more impact as we stop cluttering the call graph.
Differential Revision: http://reviews.llvm.org/D10788
llvm-svn: 240873
Absolute symbols were always handled as external symbols, so if two
or more object files define the same absolute symbol, they would
conflict even if the symbol is private to each file.
This patch fixes that bug.
llvm-svn: 240756
I split them in r240319 because I thought they are different enough
that we should treat them as different types. It turned out that
that was not a good idea. They are so similar that we ended up having
many duplicate code.
llvm-svn: 240706
Only SectionChunk can be dead-stripped. Previously,
all types of chunks implemented these functions,
but their functions were blank.
Likewise, only DefinedRegular and DefinedCOMDAT symbols
can be dead-stripped. markLive() function was implemented
for other symbol types, but they were blank.
I started thinking that the change I made in r240319 was
a mistake. I separated DefinedCOMDAT from DefinedRegular
because I thought that would make the code cleaner, but now
we want to handle them as the same type here. Maybe we
should roll it back.
This change should improve readability a bit as this removes
some dubious uses of reinterpret_cast. Previously, we
assumed that all COMDAT chunks are actually SectionChunks,
which was not very obvious.
llvm-svn: 240675
Identical COMDAT Folding (ICF) is an optimization to reduce binary
size by merging COMDAT sections that contain the same metadata,
actual data and relocations. MSVC link.exe and many other linkers
have this feature. LLD achieves on per with MSVC in terms produced
binary size with this patch.
This technique is pretty effective. For example, LLD's size is
reduced from 64MB to 54MB by enaling this optimization.
The algorithm implemented in this patch is extremely inefficient.
It puts all COMDAT sections into a set to identify duplicates.
Time to self-link with/without ICF are 3.3 and 320 seconds,
respectively. So this option roughly makes LLD 100x slower.
But it's okay as I wanted to achieve correctness first.
LLD is still able to link itself with this optimization.
I'm going to make it more efficient in followup patches.
Note that this optimization is *not* entirely safe. C/C++ require
different functions have different addresses. If your program
relies on that property, your program wouldn't work with ICF.
However, it's not going to be an issue on Windows because MSVC
link.exe turns ICF on by default. As long as your program works
with default settings (or not passing /opt:noicf), your program
would work with LLD too.
llvm-svn: 240519
Chunks are basically unnamed chunks of bytes, and we don't like
to give them names. However, for logging or debugging, we want to
know symbols names of functions for COMDAT chunks. (For example,
we want to print out "we have removed unreferenced COMDAT section
which contains a function FOOBAR.")
This patch is to do that.
llvm-svn: 240484
Before this change, you got to cast a symbol to DefinedRegular and then
call isCOMDAT() to determine if a given symbol is a COMDAT symbol.
Now you can just use isa<DefinedCOMDAT>().
As to the class definition of DefinedCOMDAT, I could remove duplicate
code from DefinedRegular and DefinedCOMDAT by introducing another base
class for them, but I chose to not do that to keep the class hierarchy
shallow. This amount of code duplication doesn't worth to define a new
class.
llvm-svn: 240319
This is a case that one mistake caused a very mysterious bug.
I made a mistake to calculate addresses of common symbols, so
each common symbol pointed not to the beginning of its location
but to the end of its location. (Ouch!)
Common symbols are aligned on 16 byte boundaries. If a common
symbol is small enough to fit between the end of its real
location and whatever comes next, this bug didn't cause any harm.
However, if a common symbol is larger than that, its memory
naturally overlapped with other symbols. That means some
uninitialized variables accidentally shared memory. Because
totally unrelated memory writes mutated other varaibles, it was
hard to debug.
It's surprising that LLD was able to link itself and all LLD
tests except gunit tests passed with this nasty bug.
With this fix, the new COFF linker is able to pass all tests
for LLVM, Clang and LLD if I use MSVC cl.exe as a compiler.
Only three tests are failing when used with clang-cl.
llvm-svn: 240216
getName() does strlen() on the symbol table, so it's not very fast.
It's not as bad as r239332 because the number of symbols exported
from archive files are fewer than object files, and they are usually
shorter, though.
llvm-svn: 240178
In the case where either a bitcode file and a regular file or two bitcode
files export a common or comdat symbol with the same name, the linker needs
to pick one of them following COFF semantics. This patch implements a design
for resolving such symbols that pushes most of the work onto either LLD's
regular mechanism for resolving common or comdat symbols or the IR linker's
mechanism for doing the same.
We modify SymbolBody::compare to always prefer non-bitcode symbols, so that
during the initial phase of symbol resolution, the symbol table always contains
a regular symbol in any case where we need to choose between a regular and
a bitcode symbol. In SymbolTable::addCombinedLTOObject, we force export
any bitcode symbols that were initially pre-empted by a regular symbol,
and later use SymbolBody::compare to choose between the regular symbol in
the symbol table and the regular symbol from the combined LTO object file.
This design seems to be sound, so long as the resolution mechanism is defined
to be commutative and associative modulo arbitrary choices between symbols
(which seems to be the case for COFF).
Differential Revision: http://reviews.llvm.org/D10329
llvm-svn: 239563
This change seems to make the linker about 10% faster.
Reading symbol name is not very cheap because it needs strlen()
on the string table. We were wasting time on reading non-external
symbol names that would never be used by the linker.
llvm-svn: 239332
We forgot to check for auxiliary symbol's type. So we sometimes read
garbage as associative section definitions.
Associative sections are considered as not live themselves by the
garbage collector because they are live only when associaited sections
are live.
By reading more data (or garbage) as associative section definitions,
we treated more sections as non-GC-roots, that caused the linker to
discard too many sections by mistake. That caused another mysterious
bug (such as some global constructors don't run at all for some reason.)
llvm-svn: 239287
In r238690, I made all files have only MemoryBufferRefs. This change
is to do the same thing for the bitcode file reader. Also updated
a few variable names to match with other code.
llvm-svn: 238782
Symbols exported by DLLs can be imported not by name but by
small number or ordinal. Usually, symbols have both ordinals
and names, and in that case ordinals are called "hints" and
used by the loader as hints.
However, symbols can have only ordinals. They are called
import-by-ordinal symbols. You need to manage ordinals by hand
so that they will never change if you choose to use the feature.
But it's supposed to make dynamic linking faster because
it needs no string comparison. Not sure if that claim still
stands in year 2015, though. Anyways, the feature exists,
and this patch implements that.
llvm-svn: 238780
Instead of returning non-categorized errors, return categorized errors.
All uses of make_dynamic_error_code are removed.
Because we don't have error reporting mechanism, I just chose to print out
error messages to stderr, and then return an error object. Not sure if
that's the right thing to do, but at least it seems practical.
http://reviews.llvm.org/D10129
llvm-svn: 238714
Previously, a MemoryBuffer of a file was owned by each InputFile object.
This patch makes the Driver own all of them. InputFiles now have only
MemoryBufferRefs. This change simplifies ownership managment
(particularly for ObjectFile -- the object owned a MemoryBuffer only when
it's not created from an archive file, because in that case a parent
archive file owned the entire buffer. Now it owns nothing unconditionally.)
llvm-svn: 238690
Currently we set the field to zero, but as per the spec, we should
set numbers we read from import library files. The loader uses the
values as starting offsets for binary search when looking up imported
symbols from DLL.
llvm-svn: 238562
This is an initial patch for a section-based COFF linker.
The patch has 2300 lines of code including comments and blank lines.
Before diving into details, you want to start from reading README
because it should give you an overview of the design.
All important things are written in the README file, so I write
summary here.
- The linker is already able to self-link on Windows.
- It's significantly faster than the existing implementation.
The existing one takes 5 seconds to link LLD on my machine,
while the new one only takes 1.2 seconds, even though the new
one is not multi-threaded yet. (And a proof-of-concept multi-
threaded version was able to link it in 0.5 seconds.)
- It uses much less memory (250MB vs. 2GB virtual memory space
to self-host).
- IMHO the new code is much simpler and easier to read than
the existing PE/COFF port.
http://reviews.llvm.org/D10036
llvm-svn: 238458
Peter Collingbourne