Summary:
This update now allows users to specify `--blame-context` and `--blame-context-all` to print source file blame information for the source of the blame.
Also updates the inline printing to correctly identify the top of the inlining stack for blame information.
Patch by Mitch Phillips!
Reviewers: vlad.tsyrklevich
Subscribers: llvm-commits, kcc, pcc
Differential Revision: https://reviews.llvm.org/D40111
llvm-svn: 324035
Summary: Existing version doesn't work on Windows as it always prints 0.00.
Reviewers: Dor1s
Reviewed By: Dor1s
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42767
llvm-svn: 323923
For now, we are not using wasm globals, except for modeling of
the stack points.
Alos, factor out common struct WasmGlobalType, which matches the
name for that tuple in the Wasm spec and rename methods
to "isBindingGlobal", "isTypeGlobal" to avoid ambiguity.
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D42750
llvm-svn: 323901
When a the Apple link editor builds a kext bundle file type and the
value of the -miphoneos-version-min argument is significantly current
(like 11.0) then the (__TEXT,__text) section is changed to the
(__TEXT_EXEC,__text) section. So it would be nice for llvm-nm to
show symbols in that section with a type of T instead of the generic
type of S for some section other than text, data, etc.
rdar://36262205
llvm-svn: 323836
Sometimes users do not specify data layout in LLVM assembly and let llc set the
data layout by target triple after loading the LLVM assembly.
Currently the parser checks alloca address space no matter whether the LLVM
assembly contains data layout definition, which causes false alarm since the
default data layout does not contain the correct alloca address space.
The parser also calls verifier to check debug info and updating invalid debug
info. Currently there is no way to let the verifier to check debug info only.
If the verifier finds non-debug-info issues the parser will fail.
For llc, the fix is to remove the check of alloca addr space in the parser and
disable updating debug info, and defer the updating of debug info and
verification to be after setting data layout of the IR by target.
For other llvm tools, since they do not override data layout by target but
instead can override data layout by a command line option, an argument for
overriding data layout is added to the parser. In cases where data layout
overriding is necessary for the parser, the data layout can be provided by
command line.
Differential Revision: https://reviews.llvm.org/D41832
llvm-svn: 323826
Summary: ThinLTO may skip object for other reasons, e.g. if there is no summary.
Reviewers: pcc, eugenis
Subscribers: mehdi_amini, inglorion, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D42514
llvm-svn: 323818
Passing -minimize to dsymutil prevents the emission of .debug_inlines,
.debug_pubnames, and .debug_pubtypes in favor of the Apple accelerator
tables.
The actual check in the DWARF linker was added in r323655. This patch
simply enables it.
Differential revision: https://reviews.llvm.org/D42688
llvm-svn: 323812
Summary:
It was a copy-paste typo, sorting only to the 90th percentile twice.
Now, it only sorts the array prefix once, and extracts what we need.
Reviewers: dberris, kpw, eizan
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42690
llvm-svn: 323800
Introduce an extension to support passing linker options to the linker.
These would be ignored by older linkers, but newer linkers which support
this feature would be able to process the linker.
Emit a special discarded section `.linker-option`. The content of this
section is a pair of strings (key, value). The key is a type identifier for
the parameter. This allows for an argument free parameter that will be
processed by the linker with the value being the parameter. As an example,
`lib` identifies a library to be linked against, traditionally the `-l`
argument for Unix-based linkers with the parameter being the library name.
Thanks to James Henderson, Cary Coutant, Rafael Espinolda, Sean Silva
for the valuable discussion on the design of this feature.
llvm-svn: 323783
r323476 added support for DW_FORM_line_strp, and incorrectly made that
depend on having a DWARFUnit available. We shouldn't be tracking
.debug_line_str in DWARFUnit after all. After this patch, I can do an
NFC follow up and undo a bunch of the "plumbing" part of r323476.
Differential Revision: https://reviews.llvm.org/D42609
llvm-svn: 323691
This patch adds support for generating accelerator tables in dsymutil.
This feature was already present in our internal repository but not yet
upstreamed because it requires changes to the Apple accelerator table
implementation.
Differential revision: https://reviews.llvm.org/D42501
llvm-svn: 323655
Summary:
This commit renames DWARFAcceleratorTable to AppleAcceleratorTable to free up
the first name as an interface for the different accelerator tables.
Then I add a DWARFDebugNames class for the dwarf5 table.
Presently, the only common functionality of the two classes is the dump()
method, because this is the only method that was necessary to implement
dwarfdump -debug-names; and because the rest of the
AppleAcceleratorTable interface does not directly transfer to the dwarf5
tables (the main reason for that is that the present interface assumes
the tables are homogeneous, but the dwarf5 tables can have different
keys associated with each entry).
I expect to make the common interface richer as I add more functionality
to the new class (and invent a way to represent it in generic way).
In terms of sharing the implementation, I found the format of the two
tables sufficiently different to frustrate any attempts to have common
parsing or dumping code, so presently the implementations share just low
level code for formatting dwarf constants.
Reviewers: vleschuk, JDevlieghere, clayborg, aprantl, probinson, echristo, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42297
llvm-svn: 323638
Tests were working on my system because the old correct files were left over
and the new bug was that the output files were not being output at all.
Consequently the test work on my system but fail on any other system.
This reverts commit r323484.
llvm-svn: 323486
While writing code for input and output formats in llvm-objcopy it became
apparent that there was a code health problem. This change attempts to solve
that problem by refactoring the code to use Reader and Writer objects that can
read in different objects in different formats, convert them to a single shared
internal representation, and then write them to any other representation.
New classes:
Reader: the base class used to construct instances of the internal
representation
Writer: the base class used to write out instances of the internal
representation
ELFBuilder: a helper class for ELFWriter that takes an ELFFile and converts it
to a Object
SectionVisitor: it became necessary to remove writeSection from SectionBase
because, under the new Reader/Writer scheme, it's possible to convert between
ELF Types such as ELF32LE and ELF32BE. This isn't possible with writeSection
because it (dynamically) depends on the underlying section type *and*
(statically) depends on the ELF type. Bad things would happen if the underlying
sections for ELF32LE were used for writing to ELF64BE. To avoid this code smell
(which would have compiled, run, and output some nonsesnse) I decoupled writing
of sections from a class.
SectionWriter: This is just the ELFT templated implementation of
SectionVisitor. Many classes now have this class as a friend so that the
writing methods in this class can write out private data.
ELFWriter: This is the Writer that outputs to ELF
BinaryWriter: This is the Writer that outputs to Binary
ElfType: Because the ELF Type is not a part of the Object anymore we need a way
to construct the correct default Writer based on properties of the Reader. This
enum just keeps track of the ELF type of the input so it can be used as the
default output type as well.
Object has correspondingly undergone some serious changes as well. It now has
more generic methods for building and manipulating ELF binaries. This interface
makes ELFBuilder easy enough to use and will make the BinaryReader/Builder easy
to create as well. Most changes in this diff are cosmetic and deal with the
fact that a method has been moved from one class to another or a change from a
pointer to a reference. Almost no changes should result in a functional
difference (this is after all a refactor). One minor functional change was made
and the result can be seen in remove-shstrtab-error.test. The fact that it
fails hasn't changed but the error message has changed because that failure is
detected at a later point in the code now (because WriteSectionHeaders is a
property of the ElfWriter *not* a property of the Object). I'd say roughly
80-90% of this code is cosmetically different, 10-19% is different but
functionally the same, and 1-5% is functionally different despite not causing a
change in tests.
Differential Revision: https://reviews.llvm.org/D42222
llvm-svn: 323480
It was reverted after buildbot regressions.
Original commit message:
This allows relative block frequency of call edges to be passed
to the thinlink stage where it will be used to compute synthetic
entry counts of functions.
llvm-svn: 323460
Summary:
This allows relative block frequency of call edges to be passed to the
thinlink stage where it will be used to compute synthetic entry counts
of functions.
Reviewers: tejohnson, pcc
Subscribers: mehdi_amini, llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D42212
llvm-svn: 323349
This is needed in order to use our StringPool entries in the Apple
accelerator tables.
As this is NFC we rely on the existing tests for correctness.
llvm-svn: 323339
Combine expression patterns to form expressions with fewer, simple instructions.
This pass does not modify the CFG.
For example, this pass reduce width of expressions post-dominated by TruncInst
into smaller width when applicable.
It differs from instcombine pass in that it contains pattern optimization that
requires higher complexity than the O(1), thus, it should run fewer times than
instcombine pass.
Differential Revision: https://reviews.llvm.org/D38313
llvm-svn: 323321
Summary:
Currently, there is no way to extract a basic block from a function easily. This patch
extends llvm-extract to extract the specified basic block(s).
Reviewers: loladiro, rafael, bogner
Reviewed By: bogner
Subscribers: hintonda, mgorny, qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D41638
llvm-svn: 323266
Opt's "-enable-debugify" mode adds an instance of Debugify at the
beginning of the pass pipeline, and an instance of CheckDebugify at the
end.
You can enable this mode with lit using: -Dopt="opt -enable-debugify".
Note that running test suites in this mode will result in many failures
due to strict FileCheck commands, etc.
It can be more useful to look for assertion failures which arise only
when Debugify is enabled, e.g to prove that we have (or do not have)
test coverage for some code path with debug info present.
Differential Revision: https://reviews.llvm.org/D41793
llvm-svn: 323256
We were a bit too trusting about the offsets encoded in MachO compact unwind
sections, so this passes every access through a bounds check just in case. It
prevents a few segfaults on malformed object files, if one should ever come
along.
Mostly to silence fuzzers in the vague hope they might be able to produce
something useful without the noise.
llvm-svn: 323198
This applies to most pipelines except the LTO and ThinLTO backend
actions - it is for use at the beginning of the overall pipeline.
This extension point will be used to add the GCOV pass when enabled in
Clang.
llvm-svn: 323166
Summary:
First, we need to explain the core of the vulnerability. Note that this
is a very incomplete description, please see the Project Zero blog post
for details:
https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html
The basis for branch target injection is to direct speculative execution
of the processor to some "gadget" of executable code by poisoning the
prediction of indirect branches with the address of that gadget. The
gadget in turn contains an operation that provides a side channel for
reading data. Most commonly, this will look like a load of secret data
followed by a branch on the loaded value and then a load of some
predictable cache line. The attacker then uses timing of the processors
cache to determine which direction the branch took *in the speculative
execution*, and in turn what one bit of the loaded value was. Due to the
nature of these timing side channels and the branch predictor on Intel
processors, this allows an attacker to leak data only accessible to
a privileged domain (like the kernel) back into an unprivileged domain.
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In many
cases, the compiler can simply use directed conditional branches and
a small search tree. LLVM already has support for lowering switches in
this way and the first step of this patch is to disable jump-table
lowering of switches and introduce a pass to rewrite explicit indirectbr
sequences into a switch over integers.
However, there is no fully general alternative to indirect calls. We
introduce a new construct we call a "retpoline" to implement indirect
calls in a non-speculatable way. It can be thought of loosely as
a trampoline for indirect calls which uses the RET instruction on x86.
Further, we arrange for a specific call->ret sequence which ensures the
processor predicts the return to go to a controlled, known location. The
retpoline then "smashes" the return address pushed onto the stack by the
call with the desired target of the original indirect call. The result
is a predicted return to the next instruction after a call (which can be
used to trap speculative execution within an infinite loop) and an
actual indirect branch to an arbitrary address.
On 64-bit x86 ABIs, this is especially easily done in the compiler by
using a guaranteed scratch register to pass the target into this device.
For 32-bit ABIs there isn't a guaranteed scratch register and so several
different retpoline variants are introduced to use a scratch register if
one is available in the calling convention and to otherwise use direct
stack push/pop sequences to pass the target address.
This "retpoline" mitigation is fully described in the following blog
post: https://support.google.com/faqs/answer/7625886
We also support a target feature that disables emission of the retpoline
thunk by the compiler to allow for custom thunks if users want them.
These are particularly useful in environments like kernels that
routinely do hot-patching on boot and want to hot-patch their thunk to
different code sequences. They can write this custom thunk and use
`-mretpoline-external-thunk` *in addition* to `-mretpoline`. In this
case, on x86-64 thu thunk names must be:
```
__llvm_external_retpoline_r11
```
or on 32-bit:
```
__llvm_external_retpoline_eax
__llvm_external_retpoline_ecx
__llvm_external_retpoline_edx
__llvm_external_retpoline_push
```
And the target of the retpoline is passed in the named register, or in
the case of the `push` suffix on the top of the stack via a `pushl`
instruction.
There is one other important source of indirect branches in x86 ELF
binaries: the PLT. These patches also include support for LLD to
generate PLT entries that perform a retpoline-style indirection.
The only other indirect branches remaining that we are aware of are from
precompiled runtimes (such as crt0.o and similar). The ones we have
found are not really attackable, and so we have not focused on them
here, but eventually these runtimes should also be replicated for
retpoline-ed configurations for completeness.
For kernels or other freestanding or fully static executables, the
compiler switch `-mretpoline` is sufficient to fully mitigate this
particular attack. For dynamic executables, you must compile *all*
libraries with `-mretpoline` and additionally link the dynamic
executable and all shared libraries with LLD and pass `-z retpolineplt`
(or use similar functionality from some other linker). We strongly
recommend also using `-z now` as non-lazy binding allows the
retpoline-mitigated PLT to be substantially smaller.
When manually apply similar transformations to `-mretpoline` to the
Linux kernel we observed very small performance hits to applications
running typical workloads, and relatively minor hits (approximately 2%)
even for extremely syscall-heavy applications. This is largely due to
the small number of indirect branches that occur in performance
sensitive paths of the kernel.
When using these patches on statically linked applications, especially
C++ applications, you should expect to see a much more dramatic
performance hit. For microbenchmarks that are switch, indirect-, or
virtual-call heavy we have seen overheads ranging from 10% to 50%.
However, real-world workloads exhibit substantially lower performance
impact. Notably, techniques such as PGO and ThinLTO dramatically reduce
the impact of hot indirect calls (by speculatively promoting them to
direct calls) and allow optimized search trees to be used to lower
switches. If you need to deploy these techniques in C++ applications, we
*strongly* recommend that you ensure all hot call targets are statically
linked (avoiding PLT indirection) and use both PGO and ThinLTO. Well
tuned servers using all of these techniques saw 5% - 10% overhead from
the use of retpoline.
We will add detailed documentation covering these components in
subsequent patches, but wanted to make the core functionality available
as soon as possible. Happy for more code review, but we'd really like to
get these patches landed and backported ASAP for obvious reasons. We're
planning to backport this to both 6.0 and 5.0 release streams and get
a 5.0 release with just this cherry picked ASAP for distros and vendors.
This patch is the work of a number of people over the past month: Eric, Reid,
Rui, and myself. I'm mailing it out as a single commit due to the time
sensitive nature of landing this and the need to backport it. Huge thanks to
everyone who helped out here, and everyone at Intel who helped out in
discussions about how to craft this. Also, credit goes to Paul Turner (at
Google, but not an LLVM contributor) for much of the underlying retpoline
design.
Reviewers: echristo, rnk, ruiu, craig.topper, DavidKreitzer
Subscribers: sanjoy, emaste, mcrosier, mgorny, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D41723
llvm-svn: 323155
For sections with different virtual and physical addresses, alignment and
placement in the output binary should be based on the physical address.
Ran into this problem with a bare metal ARM project where llvm-objcopy added a
lot of zero-padding before the .data section that had differing addresses. GNU
objcopy did not add the padding, and after this fix, neither does llvm-objcopy.
Update a test case so a section has different physical and virtual addresses.
Fixes B35708
Authored By: Owen Shaw (owenpshaw)
Differential Revision: https://reviews.llvm.org/D41619
llvm-svn: 323144
This frees up the first name to be used as an base class for the
apple table and the dwarf5 .debug_names accel table. The rename was
split off from D42297 (adding of debug_names support), which is still
under review.
llvm-svn: 323113
Summary:
Rename LLVM_CONFIG_EXE to LLVM_CONFIG_PATH, and avoid building it if
passed in by user. This is the same way CLANG_TABLEGEN and
LLVM_TABLEGEN are handled, e.g., when -DLLVM_OPTIMIZED_TABLEGEN=ON is
passed.
Differential Revision: https://reviews.llvm.org/D41806
llvm-svn: 323053
ExternalSymbolMap now stores the string key (rather than using a StringRef),
as the object file backing the key may be removed at any time.
llvm-svn: 323001
Igor Laevsky