has settled without incident, removing the x86-specific and overly
strict 'isVectorSplat' routine in favor of generic and more powerful
splat detection.
The primary motivation and result of this is that the x86 backend can
now see through splats which contain undef elements. This is essential
if we are using a widening form of legalization and I've updated a test
case to also run in that mode as before this change the generated code
for the test case was completely scalarized.
This version of the patch much more carefully handles the undef lanes.
- We aren't overly conservative about them in the shift lowering
(where we will never use the splat itself).
- One place where the splat would have been re-used by the existing code
now explicitly constructs a new constant splat that will be safe.
- The broadcast lowering is much more reasonable with undefs by doing
a correct check of whether the splat is the only user of a loaded
value, checking that the splat actually crosses multiple lanes before
using a broadcast, and handling broadcasts of non-constant splats.
As a consequence of the last bullet, the weird usage of vpshufd instead
of vbroadcast is gone, and we actually can lower an AVX splat with
vbroadcastss where before we emitted a really strange pattern of
a vector load and a manual splat across the vector.
llvm-svn: 212602
aggressively from the x86 shuffle lowering to the generic SDAG vector
shuffle formation code.
This code already tried to fold away shuffles of splats! It just had
lots of bugs and couldn't handle the case my new x86 shuffle lowering
needed.
First, it failed to correctly compute whether N2 was undef because it
pre-computed this, then did transformations which could *make* N2 undef,
then failed to ever re-consider the precomputed state.
Second, it didn't look through bitcasts at all, even in the safe cases
where they are just element-type bitcasts with no change to the number
of elements.
Third, it didn't handle all-zero bit casts nicely the way my code in the
x86 side of things did, which is essential to getting good zext-shuffle
lowerings.
But all of these are generic. I just ported the code down to this layer
and fixed the surrounding bugs. Tests exercising this in the x86 backend
still pass and some silly code in widen_cast-6.ll gets better. I updated
that test to be a bit more precise but it's still pretty unclear what
the value of the test is in this day and age.
llvm-svn: 212517
As destination k0 is allowed but not as predicate/writemask.
I also modified the test to allow checking of error messages by the assembler.
I applied a similar approach to the test ret.s in the same directory.
llvm-svn: 212504
When combining a sequence of two PSHUFD dag nodes into a single PSHUFD,
make sure that we assign the correct type to the resulting PSHUFD.
X86ISD::PSHUFD dag nodes can be either MVT::v4i32 or MVT::v4f32.
Before this change, an assertion failure was triggered in method
'DAGCombinerInfo::CombineTo' when trying to combine the shuffles from the test
below into a single PSHUFD.
define <4 x float> @test1(<4 x float> %V) {
%1 = shufflevector <4 x float> %V, <4 x float> undef, <4 x i32> <i32 3, i32 0, i32 2, i32 1>
%2 = shufflevector <4 x float> %1, <4 x float> undef, <4 x i32> <i32 3, i32 0, i32 2, i32 1>
ret <4 x float> %2
}
llvm-svn: 212498
Add custom lowering code for signed multiply instruction selection, because the
default FastISel instruction selection for ISD::MUL will use unsigned multiply
for the i8 type and signed multiply for all other types. This would set the
incorrect flags for the overflow check.
This fixes <rdar://problem/17549300>
llvm-svn: 212493
lanes in vector splats.
The core problem here is that undef lanes can't *unilaterally* be
considered to contribute to splats. Their handling needs to be more
cautious. There is also a reported failure of the nightly testers
(thanks Tobias!) that may well stem from the same core issue. I'm going
to fix this theoretical issue, factor the APIs a bit better, and then
verify that I don't see anything bad with Tobias's reduction from the
test suite before recommitting.
Original commit message for r212324:
[x86] Generalize BuildVectorSDNode::getConstantSplatValue to work for
any constant, constant FP, or undef splat and to tolerate any undef
lanes in a splat, then replace all uses of isSplatVector in X86's
lowering with it.
This fixes issues where undef lanes in an otherwise splat vector would
prevent the splat logic from firing. It is a touch more awkward to use
this interface, but it is much more accurate. Suggestions for better
interface structuring welcome.
With this fix, the code generated with the widening legalization
strategy for widen_cast-4.ll is *dramatically* improved as the special
lowering strategies for a v16i8 SRA kick in even though the high lanes
are undef.
We also get a slightly different choice for broadcasting an aligned
memory location, and use vpshufd instead of vbroadcastss. This looks
like a minor win for pipelining and domain crossing, but a minor loss
for the number of micro-ops. I suspect its a wash, but folks can
easily tweak the lowering if they want.
llvm-svn: 212475
essentially a DAG combine that never gets a chance to run.
We might typically expect DAG combining to remove shuffles-of-splats and
other similar patterns, but we don't get a chance to run the DAG
combiner when we recursively form sub-shuffles during the lowering of
a shuffle. So instead hand-roll a really important combine directly into
the lowering code to detect shuffles-of-splats, especially shuffles of
an all-zero splat which needn't even have the same element width, etc.
This lets the new vector shuffle lowering handle shuffles which
implement things like zero-extension really nicely. This will become
even more important when I wire the legalization of zero-extension to
vector shuffles with the new widening legalization strategy.
llvm-svn: 212444
We've been performing the wrong operation on ARM for "atomicrmw nand" for
years, since "a NAND b" is "~(a & b)" rather than ARM's very tempting "a & ~b".
This bled over into the generic expansion pass.
So I assume no-one has ever actually tried to do an atomic nand in the real
world. Oh well.
llvm-svn: 212443
any constant, constant FP, or undef splat and to tolerate any undef
lanes in a splat, then replace all uses of isSplatVector in X86's
lowering with it.
This fixes issues where undef lanes in an otherwise splat vector would
prevent the splat logic from firing. It is a touch more awkward to use
this interface, but it is much more accurate. Suggestions for better
interface structuring welcome.
With this fix, the code generated with the widening legalization
strategy for widen_cast-4.ll is *dramatically* improved as the special
lowering strategies for a v16i8 SRA kick in even though the high lanes
are undef.
We also get a slightly different choice for broadcasting an aligned
memory location, and use vpshufd instead of vbroadcastss. This looks
like a minor win for pipelining and domain crossing, but a minor loss
for the number of micro-ops. I suspect its a wash, but folks can easily
tweak the lowering if they want.
llvm-svn: 212324
Silvermont can only decode one instruction per cycle if the instruction exceeds 8 bytes.
Also in Silvermont instructions with more than 3 prefixes will cause 3 cycle penalty.
Maximum nop length is limited to 7 bytes when used for padding on Silvermont.
For other x86 processors max nop length remains unchanged 15 bytes.
Differential Revision: http://reviews.llvm.org/D4374
llvm-svn: 212321
This patch:
1) Improves the cost model for x86 alternate shuffles (originally
added at revision 211339);
2) Teaches the Cost Model Analysis pass how to analyze alternate shuffles.
Alternate shuffles are a special kind of blend; on x86, we can often
easily lowered alternate shuffled into single blend
instruction (depending on the subtarget features).
The existing cost model didn't take into account subtarget features.
Also, it had a couple of "dead" entries for vector types that are never
legal (example: on x86 types v2i32 and v2f32 are not legal; those are
always either promoted or widened to 128-bit vector types).
The new x86 cost model takes into account what target features we have
before returning the shuffle cost (i.e. the number of instructions
after the blend is lowered/expanded).
This patch also teaches the Cost Model Analysis how to identify and analyze
alternate shuffles (i.e. 'SK_Alternate' shufflevector instructions):
- added function 'isAlternateVectorMask';
- added some logic to check if an instruction is a alternate shuffle and, in
case, call the target specific TTI to get the corresponding shuffle cost;
- added a test to verify the cost model analysis on alternate shuffles.
llvm-svn: 212296
This patch adds tablegen patterns to select F16C float-to-half-float
conversion instructions from 'f32_to_f16' and 'f16_to_f32' dag nodes.
If the target doesn't have F16C, then 'f32_to_f16' and 'f16_to_f32'
are expanded into library calls.
llvm-svn: 212293
mode.
This also runs the test in that mode which would reproduce the crash.
What I love is that *every single FIXME* in the test is addressed by
switching to widening.
llvm-svn: 212254
Finkel, Eric Christopher, and a bunch of other people I'm probably
forgetting (sorry), add an option to the x86 backend to widen vectors
during type legalization rather than promote them.
This still would promote vNi1 vectors to get the masks right, but would
widen other vectors. A lot of experiments are piling up right now
showing that widening should probably be the default legalization
strategy outside of vNi1 cases, but it is very hard to test the
rammifications of that and fix bugs in widening-based legalization
without an option that enables it. I'll be checking in tests shortly
that use this option to exercise cases where widening doesn't work well
and hopefully we'll be able to switch fully to this soon.
llvm-svn: 212249
This new multiclass, avx512_perm_table_3src derives from the current one and
provides the Pat<>. The next patch will add another Pat<> that uses the
writemask.
Note that I dropped the type annotation from the intrinsic call, i.e.: (v16f32
VR512:$src1) -> R512:$src1. I think that this should be fine (at least many
intrinsic calls don't provide them) and it greatly reduces the number of
template arguments.
llvm-svn: 212222
This includes assembler and codegen support (see the new tests in
avx512-encodings.s and avx512-shuffle.ll).
<rdar://problem/17492620>
llvm-svn: 212221
Otherwise they get freed and the implicit "isa<XYZ>" tests following
turn out badly (at least under sanitizers).
Also corrects the ordering of unordered atomic stores.
llvm-svn: 212136
The argument list vector is never used after it has been passed to the
CallLoweringInfo and moving it to the CallLoweringInfo is cleaner and
pretty much as cheap as keeping a pointer to it.
llvm-svn: 212135
On targets without cmpxchg16b or cmpxchg8b, the borderline atomic
operations were slipping through the gaps.
X86AtomicExpand.cpp was delegating to ISelLowering. Generic
ISelLowering was delegating to X86ISelLowering and X86ISelLowering was
asserting. The correct behaviour is to expand to a libcall, preferably
in generic ISelLowering.
This can be achieved by X86ISelLowering deciding it doesn't want the
faff after all.
llvm-svn: 212134
The logic for expanding atomics that aren't natively supported in
terms of cmpxchg loops is much simpler to express at the IR level. It
also allows the normal optimisations and CodeGen improvements to help
out with atomics, instead of using a limited set of possible
instructions..
rdar://problem/13496295
llvm-svn: 212119
For now I only updated the _alt variants. The main variants are used by
codegen and that will need a bit more work to trigger.
<rdar://problem/17492620>
llvm-svn: 212114
Adding a writemask variant would require a third asm string to be passed to
the template. Generate the AsmString in the template instead.
No change in X86.td.expanded.
llvm-svn: 212113
seh_stackalloc 0 is not representable in Win64 SEH info, so emitting it
is a bug.
Reviewers: rnk
Differential Revision: http://reviews.llvm.org/D4334
Patch by Vadim Chugunov!
llvm-svn: 212081
This patch adds support for a new builtin instruction called
__builtin_ia32_rdpmc.
Builtin '__builtin_ia32_rdpmc' is defined as a 'GCC builtin'; on X86, it can
be used to read performance monitoring counters. It takes as input the index
of the performance counter to read, and returns the value of the specified
performance counter as a 64-bit number.
Calls to this new builtin will map to instruction RDPMC.
The index in input to the builtin call is moved to register %ECX. The result
of the builtin call is the value of the specified performance counter (RDPMC
would return that quantity in registers RDX:RAX).
This patch:
- Adds builtin int_x86_rdpmc as a GCCBuiltin;
- Adds a new x86 DAG node called 'RDPMC_DAG';
- Teaches how to lower this new builtin;
- Adds an ISel pattern to select instruction RDPMC;
- Fixes the definition of instruction RDPMC adding %RAX and %RDX as
implicit definitions, and adding %ECX as implicit use;
- Adds a LLVM test to verify that the new builtin is correctly selected.
llvm-svn: 212049
This exception format is not specific to Windows x64. A similar approach is
taken on nearly all architectures. Generalise the name to reflect reality.
This will eventually be used for Windows on ARM data emission as well.
Switch the enum and namespace into an enum class.
llvm-svn: 212000
Rename the routines to reflect the reality that they are more related to call
frame information than to Win64 EH. Although EH is implemented in an intertwined
manner by augmenting with an exception handler and an associated parameter, the
majority of these routines emit information required to unwind the frames. This
also helps identify that these routines are generic for most windows platforms
(they apply equally to nearly all architectures except x86) although the
encoding of the information is architecture dependent.
Unwinding data is emitted via EmitWinCFI* and exception handling information via
EmitWinEH*.
llvm-svn: 211994
lowering for v16i8.
ASan and some bots caught this bug with existing test cases. Fixing it
even fixed a miscompile with one of the test cases. I'm still a bit
suspicious of this test case as I've not taken a proper amount of time
to think about it, but the fix here is strict goodness.
llvm-svn: 211976
These show up really frequently, not the least with actual splats. =] We
lowered these quite badly before. The new code path tries to widen i8
shuffles to i16 shuffles in a splat-like way. There are still some
inefficiencies in our i16 splat logic though, so we aren't really done
here.
Also, for certain patterns (bit of a gather-and-splat) we still
generate pretty silly code, and I've left a fixme for addressing it.
However, I'm not actually worried about this code pattern as much. The
old shuffle lowering generates a 29 instruction monstrosity for it that
should execute much more slowly.
llvm-svn: 211974
lowering.
For maximum irony, I had already discovered this bug, diagnosed it, and
left FIXMEs about it in the test cases. =[ I just failed to go back over
those until after i had reduced a bootstrap miscompile down to a single
TU, stared at the assembly for an hour, and figured out the bug. Again.
Oh well.
llvm-svn: 211955
a bootstrap.
I managed to mis-remember how PACKUS worked on x86, and was using undef
for the high bytes instead of zero. The fix is fairly obvious.
llvm-svn: 211922
Summary:
This allows it to fold pshufd instructions across intervening
half-shuffles and other noise. This pattern actually shows up in the
generic lowering tests, but I've also added direct tests using
intrinsics to make sure that the specific desired functionality is
working even if the lowering stuff changes in the future.
Differential Revision: http://reviews.llvm.org/D4292
llvm-svn: 211892
half-shuffles, even looking through intervening instructions in a chain.
Summary:
This doesn't happen to show up with any test cases I've found for the current
shuffle lowering, but previous attempts would benefit from this and it seems
generally useful. I've tested it directly using intrinsics, which also shows
that it will work with hand vectorized code as well.
Note that even though pshufd isn't directly used in these tests, it gets
exercised because we combine some of the half shuffles into a pshufd
first, and then merge them.
Differential Revision: http://reviews.llvm.org/D4291
llvm-svn: 211890
trivially redundant.
This fixes several cases in the new vector shuffle lowering algorithm
which would generate redundant shuffle instructions for the sake of
simplicity.
I'm also deleting a testcase which was somewhat ridiculous. It was
checking for a bug in 2007 about incorrectly transforming shuffles by
looking for the string "-86" in the output of a pretty substantial
function. This test case doesn't seem to have any value at this point.
Differential Revision: http://reviews.llvm.org/D4240
llvm-svn: 211889
x86 backend.
This sketches out a new code path for vector lowering, hidden behind an
off-by-default flag while it is under development. The fundamental idea
behind the new code path is to aggressively break down the problem space
in ways that ease selecting the odd set of instructions available on
x86, and carefully avoid scalarizing code even when forced to use older
ISAs. Notably, this starts off restricting itself to SSE2 and implements
the complete vector shuffle and blend space for 128-bit vectors in SSE2
without scalarizing. The plan is to layer on top of this ISA extensions
where we can bail out of the complex SSE2 lowering and opt for
a cheaper, specialized instruction (or set of instructions). It also
needs to be generalized to AVX and AVX512 vector widths.
Currently, this does a decent but not perfect job for SSE2. There are
some specific shortcomings that I plan to address:
- We need a peephole combine to fold together shuffles where possible.
There are cases where a previous shuffle could be modified slightly to
arrange for elements to be in the correct position and a later shuffle
eliminated. Doing this eagerly added quite a bit of complexity, and
so my plan is to combine away these redundancies afterward.
- There are a lot more clever ways to use unpck and pack that need to be
added. This is essential for real world shuffles as it turns out...
Once SSE2 is polished a bit I should be able to get interesting numbers
on performance improvements on benchmarks conducive to vectorization.
All of this will be off by default until it is functionally equivalent
of course.
Differential Revision: http://reviews.llvm.org/D4225
llvm-svn: 211888
For now I used a separate template for these sub-vector/tuple broadcasts
rather than sharing the mem variants with avx512_int_broadcast_rm.
<rdar://problem/17402869>
llvm-svn: 211828
This patch teaches the backend how to canonicalize a shuffle vectors
according to the rule:
- (shuffle (FADD A, B), (FSUB A, B), Mask) ->
(shuffle (FSUB A, -B), (FADD A, -B), Mask)
Where 'Mask' is:
<0,5,2,7> ;; for v4f32 and v4f64 shuffles.
<0,3> ;; for v2f64 shuffles.
<0,9,2,11,4,13,6,15> ;; for v8f32 shuffles.
In general, ISel only knows how to pattern-match a canonical
'fadd + fsub + blendi' dag node sequence into an ADDSUB instruction.
This new rule allows to convert a non-canonical dag sequence into a
canonical one that will be matched by a single ADDSUB at ISel stage.
The idea of converting a non-canonical ADDSUB into a canonical one by
swapping the first two operands of the shuffle, and then negating the
second operand of the FADD and FSUB, was originally proposed by Hal Finkel.
llvm-svn: 211771
The *_alt defs for vcmp are used by the InstParser (the asm string in the main
def is used by the InstPrinter) . The former was accepting vector registers
as destination rather than mask registers.
llvm-svn: 211750
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
llvm-svn: 211749
If the cmp is in a different basic block, then it is possible that not all
operands of that compare have defined registers. This can happen when one of
the operands to the cmp is a load and the load gets folded into the cmp. In
this case FastISel will skip the load instruction and the vreg is never
defined.
llvm-svn: 211730
This patch teaches method 'LowerVECTOR_SHUFFLE' to give higher precedence to
the check for 'isBlendMask'; the idea is that, when possible, we should firstly
check if a shuffle performs a blend, and in case, try to lower it into a BLENDI
instead of selecting a SHUFP or (worse) a VPERM2X128.
In general:
- AVX VBLENDPS/D always have better latency and throughput than VPERM2F128;
- BLENDPS/D instructions tend to always have better 'reciprocal throughput'
than the equivalent SHUFPS/D;
- Both BLENDPS/D and SHUFPS/D are often decoded into the same number of
m-ops; however, a m-op obtained from a BLENDPS/D can be scheduled to more
than one execution port.
This patch:
- Moves the check for 'isBlendMask' immediately before the check for
'isSHUFPMask' within method 'LowerVECTOR_SHUFFLE';
- Updates existing tests for sse/avx shuffle/blend instructions to verify
that we select (v)blendps/d when possible (instead of (v)shufps/d or
vperm2f128).
llvm-svn: 211720
--
This patch enables LLVM to emit Win64-native unwind info rather than
DWARF CFI. It handles all corner cases (I hope), including stack
realignment.
Because the unwind info is not flexible enough to describe stack frames
with a gap of unknown size in the middle, such as the one caused by
stack realignment, I modified register spilling code to place all spills
into the fixed frame slots, so that they can be accessed relative to the
frame pointer.
Patch by Vadim Chugunov!
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D4081
llvm-svn: 211691
This patch teaches the backend how to combine a build_vector that implements
an 'addsub' between packed float vectors into a sequence of vector add
and vector sub followed by a VSELECT.
The new VSELECT is expected to be lowered into a BLENDI.
At ISel stage, the sequence 'vector add + vector sub + BLENDI' is
pattern-matched against ISel patterns added at r211427 to select
'addsub' instructions.
Added three more ISel patterns for ADDSUB.
Added test sse3-avx-addsub-2.ll to verify that we correctly emit 'addsub'
instructions.
llvm-svn: 211679
Optimize the codegen of select and branch instructions to directly use the
EFLAGS from the {s|u}{add|sub|mul}.with.overflow intrinsics.
llvm-svn: 211645
V' bit in the P2 byte of the EVEX prefix provides the top bit of the NDD and
NDS register fields. This was simply not used in the decoder until now.
Fixes <rdar://problem/17402661>
llvm-svn: 211565
The extends the select lowering coverage by emiting pseudo cmov
instructions. These insturction will be later on lowered to control-flow to
simulate the select.
llvm-svn: 211545
This extends the select lowering to support floating-point selects. The
lowering depends on SSE instructions and that the conditon comes from a
floating-point compare. Under this conditions it is possible to emit an
optimized instruction sequence that doesn't require any branches to
simulate the select.
llvm-svn: 211544
This patch adds ISel patterns to select SSE3/AVX ADDSUB instructions
from a sequence of "vadd + vsub + blend".
Example:
///
typedef float float4 __attribute__((ext_vector_type(4)));
float4 foo(float4 A, float4 B) {
float4 X = A - B;
float4 Y = A + B;
return (float4){X[0], Y[1], X[2], Y[3]};
}
///
Before this patch, (with flag -mcpu=corei7) llc produced the following
assembly sequence:
movaps %xmm0, %xmm2
addps %xmm1, %xmm2
subps %xmm1, %xmm0
blendps $10, %xmm2, %xmm0
With this patch, we now get a single
addsubps %xmm1, %xmm0
llvm-svn: 211427
This patch enables LLVM to emit Win64-native unwind info rather than
DWARF CFI. It handles all corner cases (I hope), including stack
realignment.
Because the unwind info is not flexible enough to describe stack frames
with a gap of unknown size in the middle, such as the one caused by
stack realignment, I modified register spilling code to place all spills
into the fixed frame slots, so that they can be accessed relative to the
frame pointer.
Patch by Vadim Chugunov!
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D4081
llvm-svn: 211399
This patch adds support to recognize patterns such as fadd,fsub,fadd,fsub.../add,sub,add,sub... and
vectorizes them as vector shuffles if they are profitable.
These patterns of vector shuffle can later be converted to instructions such as addsubpd etc on X86.
Thanks to Arnold and Hal for the reviews. http://reviews.llvm.org/D4015
llvm-svn: 211339
instructions available as synthetic SDNodes PACKSS and PACKUS that will
select to the correct instruction variants based on the return type.
This allows us to use these rather important instructions when lowering
vector shuffles.
Also moves the relevant instruction definitions to be split out from
the fully generic multiclasses to allow them to match these new SDNodes
in the same way that the UNPCK instructions do.
No functionality should actually be changed here.
llvm-svn: 211332
Before this change, the backend was unable to fold a build_vector dag
node with UNDEF operands into a single horizontal add/sub.
This patch teaches how to combine a build_vector with UNDEF operands into a
horizontal add/sub when possible. The algorithm conservatively avoids to combine
a build_vector with only a single non-UNDEF operand.
Added test haddsub-undef.ll to verify that we correctly fold horizontal binop
even in the presence of UNDEFs.
llvm-svn: 211265
We would get confused by '@' characters in symbol names, we would
mistake the text following them for the variant kind.
When an identifier a string, the variant kind will never show up inside
of it. Instead, check to see if there is a variant following the
string.
This fixes PR19965.
llvm-svn: 211249
Note that I followed the AVX2 convention here and didn't add LLVM intrinsics
for stores. These can be generated with the nontemporal hint on LLVM IR
stores (see new test). The GCC builtins are lowered directly into nontemporal
stores.
<rdar://problem/17082571>
llvm-svn: 211176
This patch is a follow up to r211040 & r211052. Rather than bailing out of fast
isel this patch will generate an alternate instruction (movabsq) instead of the
leaq. While this will always have enough room to handle the 64 bit displacment
it is generally over kill for internal symbols (most displacements will be
within 32 bits) but since we have no way of communicating the code model to the
the assmebler in order to avoid flagging an absolute leal/leaq as illegal when
using a symbolic displacement.
llvm-svn: 211130
This optimizes predicates for certain compares, such as fcmp oeq %x, %x to
fcmp ord %x, %x. The latter one is more efficient to generate.
The same optimization is applied to conditional branches.
llvm-svn: 211126
Make use of helper functions to simplify the branch and compare instruction
selection in FastISel. Also add test cases for compare and conditonal branch.
llvm-svn: 211077
Added comment to clarify why we r211040 choose to bail out of fast isel instead
of generating a more complicated relocation, and fix mislabelled register in the
comments of the asan test case.
llvm-svn: 211052
On x86_86 the lea instruction can only use a 32 bit immediate value. When
the code is compiled statically the RIP register is not used, meaning the
immediate is all that can be used for the relocation, which is not sufficient
in the case of targets more than +/- 2GB away. This patch bails out of fast
isel in those cases and reverts to DAG which does the right thing.
Test case included.
llvm-svn: 211040
Lowering this new node allows us to fold the almost universal
comparison for success before it's even formed. Instead we can create
a copy from EFLAGS and an X86ISD::SETCC operation since all "cmpxchg"
instructions set the zero-flag to the correct value.
rdar://problem/13201607
llvm-svn: 210923
This commit adds a weak variant of the cmpxchg operation, as described
in C++11. A cmpxchg instruction with this modifier is permitted to
fail to store, even if the comparison indicated it should.
As a result, cmpxchg instructions must return a flag indicating
success in addition to their original iN value loaded. Thus, for
uniformity *all* cmpxchg instructions now return "{ iN, i1 }". The
second flag is 1 when the store succeeded.
At the DAG level, a new ATOMIC_CMP_SWAP_WITH_SUCCESS node has been
added as the natural representation for the new cmpxchg instructions.
It is a strong cmpxchg.
By default this gets Expanded to the existing ATOMIC_CMP_SWAP during
Legalization, so existing backends should see no change in behaviour.
If they wish to deal with the enhanced node instead, they can call
setOperationAction on it. Beware: as a node with 2 results, it cannot
be selected from TableGen.
Currently, no use is made of the extra information provided in this
patch. Test updates are almost entirely adapting the input IR to the
new scheme.
Summary for out of tree users:
------------------------------
+ Legacy Bitcode files are upgraded during read.
+ Legacy assembly IR files will be invalid.
+ Front-ends must adapt to different type for "cmpxchg".
+ Backends should be unaffected by default.
llvm-svn: 210903
This adds support for the cvttss2si/cvttsd2si intrinsics. Preceding
insertelement instructions are folded into the conversion instruction (if
possible).
llvm-svn: 210870
This commit adds MachineMemOperands to load and store instructions. This allows
the peephole optimizer to fold load instructions. Unfortunatelly the peephole
optimizer currently doesn't run at -O0.
llvm-svn: 210858
lib/Target/X86/X86TargetTransformInfo.cpp: In member function ‘virtual unsigned int {anonymous}::X86TTI::getIntImmCost(unsigned int, unsigned int, const llvm::APInt&, llvm::Type*) const’:
lib/Target/X86/X86TargetTransformInfo.cpp:920:60: warning: enumeral and non-enumeral type in conditional expression [enabled by default]
This seems like an unhelpful warning, but there doesnt seem to be a controlling
flag, so add an explicit cast to silence the warning.
llvm-svn: 210806
When I originally added node RDTSCP_DAG (r207127) I forgot to add
a string name for it in method 'getTargetNodeName'.
No functional change intended.
llvm-svn: 210769
This patch adds target combine rules to match:
- [AVX] Horizontal add/sub of packed single/double precision floating point
values from 256-bit vectors;
- [AVX2] Horizontal add/sub of packed integer values from 256-bit vectors.
llvm-svn: 210761
This patch moves part of the logic implemented by the target specific
combine rules added at r210477 to a separate helper function.
This should make easier to add more rules for matching AVX/AVX2 horizontal
adds/subs.
This patch also fixes a problem caused by a wrong check performed on indices
of extract_vector_elt dag nodes in input to the scalar adds/subs.
New tests have been added to verify that we correctly check indices of
extract_vector_elt dag nodes when selecting a horizontal operation.
llvm-svn: 210644
This patch slightly changes the algorithm introduced at revision 210477
to fix a problem where the algorithm was producing incorrect code for
the VEX.256 encoded versions of horizontal add/sub.
For these cases, we now try to split the two 256-bit vectors into
128-bit chunks before emitting horizontal add/sub dag nodes.
Added a new test case into haddsub-2.ll.
llvm-svn: 210545
The SelectionDAG bad a special case for ISD::SELECT_CC, where it would
allow targets to specify:
setOperationAction(ISD::SELECT_CC, MVT::Other, Expand);
to indicate that they wanted to expand ISD::SELECT_CC for all types.
This wasn't applied correctly everywhere, and it makes writing new
DAG patterns with ISD::SELECT_CC difficult.
llvm-svn: 210541
The C++ and C semantics of the compare_and_swap operations actually
require us to return a boolean "success" value. In LLVM terms this
means a second comparison of the output of "cmpxchg" against the input
desired value.
However, x86's "cmpxchg" instruction sets all flags for the comparison
formed, so we can skip any secondary comparison. (N.b. this isn't true
for cmpxchg8b/16b, which only set ZF).
rdar://problem/13201607
llvm-svn: 210523
This improves the X86 cost model for small constants with large types. Before
this commit we would even hoist trivial constants such as i96 2.
This is related to <rdar://problem/17070936>
llvm-svn: 210504
This patch adds new target specific combine rules to identify horizontal
add/sub idioms from BUILD_VECTOR dag nodes.
This patch also teaches the DAGCombiner how to canonicalize sequences of
insert_vector_elt dag nodes according to the following rule:
(insert_vector_elt (insert_vector_elt A, I0), I1) ->
(insert_vecto_elt (insert_vector_elt A, I1), I0)
This new canonicalization rule only triggers if the inner insert_vector
dag node has exactly one use; also, both indices must be known constants,
and I1 < I0.
This last rule made it possible to write a simpler algorithm to identify
horizontal add/sub patterns because now we don't have to worry about the
ordering of insert_vector_elt dag nodes.
llvm-svn: 210477
This patch teaches the backend how to check for the 'NoSignedWrap' flag on
binary operations to improve the emission of 'test' instructions.
If the result of a binary operation is known not to overflow we know that
resetting the Overflow flag is unnecessary and so we can avoid emitting
the test instruction.
Patch by Marcello Maggioni.
llvm-svn: 210468
According to Intel Software Optimization Manual
on Silvermont INC or DEC instructions require
an additional uop to merge the flags.
As a result, a branch instruction depending
on an INC or a DEC instruction incurs a 1 cycle penalty.
Differential Revision: http://reviews.llvm.org/D3990
llvm-svn: 210466
X86Subtarget::isTargetCygMing || X86Subtarget::isTargetKnownWindowsMSVC is
equivalent to all Windows environments. Simplify the check to isOSWindows.
NFC.
llvm-svn: 210431
I saw at least a memory leak or two from inspection (on probably
untested error paths) and r206991, which was the original inspiration
for this change.
I ran this idea by Jim Grosbach a few weeks ago & he was OK with it.
Since it's a basically mechanical patch that seemed sufficient - usual
post-commit review, revert, etc, as needed.
llvm-svn: 210427
Summary:
We were being too strict and not accounting for undefs.
Added a test case and fixed another one where we improved codegen.
Reviewers: grosbach, nadav, delena
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4039
llvm-svn: 210361
It includes a pass that rewrites all indirect calls to jumptable functions to pass through these tables.
This also adds backend support for generating the jump-instruction tables on ARM and X86.
Note that since the jumptable attribute creates a second function pointer for a
function, any function marked with jumptable must also be marked with unnamed_addr.
llvm-svn: 210280
When JITting a large project such as Boost it's quite hard to figure out the problematic inline asm without debug location. This patch provides debug location printout before the JIT aborts due to inline asm. printDebugLoc() was exposed from MachineInstr.cpp and reused here.
If the JIT run with debug info, don't bomb on DBG_VALUE but ignore them.
http://reviews.llvm.org/D3416
llvm-svn: 210201
When lowering a ISD::BRCOND into a test+branch, make sure that we
always use the correct condition code to emit the test operation.
This fixes PR19858: "i8 checked mul is wrong on x86".
Patch by Keno Fisher!
llvm-svn: 210032
This patch teaches the backend how to simplify/canonicalize dag node
sequences normally introduced by the backend when promoting certain dag nodes
with illegal vector type.
This patch adds two new combine rules:
1) fold (shuffle (bitcast (BINOP A, B)), Undef, <Mask>) ->
(shuffle (BINOP (bitcast A), (bitcast B)), Undef, <Mask>)
2) fold (BINOP (shuffle (A, Undef, <Mask>)), (shuffle (B, Undef, <Mask>))) ->
(shuffle (BINOP A, B), Undef, <Mask>).
Both rules are only triggered on the type-legalized DAG.
In particular, rule 1. is a target specific combine rule that attempts
to sink a bitconvert into the operands of a binary operation.
Rule 2. is a target independet rule that attempts to move a shuffle
immediately after a binary operation.
llvm-svn: 209930
Summary:
Separate the check for blend shuffle_vector masks into isBlendMask.
This function will also be used to check if a vector shuffle is legal. No
change in functionality was intended, but we ended up improving codegen on
two tests, which were being (more) optimized only if the resulting shuffle
was legal.
Reviewers: nadav, delena, andreadb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3964
llvm-svn: 209923
The corresponding CFE patch replaces these intrinsics with vector initializers
in avxintrin.h. This patch removes the LLVM intrinsics from the backend.
We now stop lowering at X86ISD::VBROADCAST custom node rather than lowering
that further to the intrinsics.
The patch only changes VBROADCASTS* and leaves VBROADCAST[FI]128 to continue
to use intrinsics. As explained in the CFE patch, the reason is that we
currently don't generate as good code for them without the intrinsics.
CodeGen/X86/avx-vbroadcast.ll already provides coverage for this change. It
checks that for a series of insertelements we generate the appropriate
vbroadcast instruction.
Also verified that there was no assembly change in the test-suite before and
after this patch.
llvm-svn: 209864
This matches gcc's behavior. It also seems natural given that aliases
contain other properties that govern how it is accessed (linkage,
visibility, dll storage).
Clang still has to be updated to expose this feature to C.
llvm-svn: 209759
Currently we look at the Aliasee to decide what type of export
directive to use. It seems better to use the type of the alias
directly. This is similar to how we handle the alias having the
same address but other attributes (linkage, visibility) from the
aliasee.
With this patch it is now possible to do things like
target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-pc-windows-msvc"
@foo = global [6 x i8] c"\B8*\00\00\00\C3", section ".text", align 16
@f = dllexport alias i32 (), [6 x i8]* @foo
!llvm.module.flags = !{!0}
!0 = metadata !{i32 6, metadata !"Linker Options", metadata !1}
!1 = metadata !{metadata !2, metadata !3}
!2 = metadata !{metadata !"/DEFAULTLIB:libcmt.lib"}
!3 = metadata !{metadata !"/DEFAULTLIB:oldnames.lib"}
llvm-svn: 209600
This patch teaches the x86 backend how to efficiently lower ISD::BITCAST dag
nodes from MVT::f64 to MVT::v4i16 (and vice versa), and from MVT::f64 to
MVT::v8i8 (and vice versa).
This patch extends the logic from revision 208107 to also handle MVT::v4i16
and MVT::v8i8. Also, this patch correctly propagates Undef values when
performing the widening of a vector (example: when widening from v2i32 to
v4i32, the upper 64bits of the resulting vector are 'undef').
llvm-svn: 209451
ISD::VSELECT mask uses 1 to identify the first argument and 0 to identify the
second argument.
On the other hand, BLENDI uses 0 to identify the first argument and 1 to
identify the second argument.
Fix the generation of the blend mask to account for this difference.
The bug did not show up with r209043, because we were not checking for the
actual arguments of the blend instruction!
This commit also fixes the test cases.
Note: The same mask works for the BLENDr variant because the arguments are
swapped during instruction selection (see the BLENDXXrr patterns).
<rdar://problem/16975435>
llvm-svn: 209324
According to Intel Software Optimization Manual on Silvermont in some cases LEA
is better to be replaced with ADD instructions:
"The rule of thumb for ADDs and LEAs is that it is justified to use LEA
with a valid index and/or displacement for non-destructive destination purposes
(especially useful for stack offset cases), or to use a SCALE.
Otherwise, ADD(s) are preferable."
Differential Revision: http://reviews.llvm.org/D3826
llvm-svn: 209198
Currently the X86 backend doesn't support types larger than i128 very well. For
example an i192 multiply will assert in codegen when the 2nd argument is a constant and the constant got hoisted.
This fix changes the cost model to never hoist constants for types larger than
i128. Once the codegen issues have been resolved, the cost model can be updated
to allow also larger types.
This is related to <rdar://problem/16954938>
llvm-svn: 209162
Instructions TZCNT (requires BMI1) and LZCNT (requires LZCNT), always
provide the operand size as output if the input operand is zero.
We can take advantage of this knowledge during instruction selection
stage in order to simplify a few corner case.
llvm-svn: 209159
Summary:
When inserting an element that's coming from a vector load or a broadcast
of a vector (or scalar) load, combine the load into the insertps
instruction.
Added PerformINSERTPSCombine for the case where we need to fix the load
(load of a vector + insertps with a non-zero CountS).
Added patterns for the broadcasts.
Also added tests for SSE4.1, AVX, and AVX2.
Reviewers: delena, nadav, craig.topper
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3581
llvm-svn: 209156
- On ARM/ARM64 we get a vrev because the shuffle matching code is really smart. We still unroll anything that's not v4i32 though.
- On X86 we get a pshufb with SSSE3. Required more cleverness in isShuffleMaskLegal.
- On PPC we get a vperm for v8i16 and v4i32. v2i64 is unrolled.
llvm-svn: 209123
This is mostly a mechanical change changing all the call sites to the newer
chained-function construction pattern. This removes the horrible 15-parameter
constructor for the CallLoweringInfo in favour of setting properties of the call
via chained functions. No functional change beyond the removal of the old
constructors are intended.
llvm-svn: 209082
were added in SSE2, no SSSE3. Found this while auditing all uses of
SSSE3 in the X86 target. I don't actually expect this to make
a significant difference on anything and I don't have any detailed test
cases but I updated the existing test cases that already covered some of
this code path.
llvm-svn: 209056
vselects with constant masks, after legalization, will get turned into
specialized shuffle_vectors so they can be matched to blend+imm
instructions.
Fixed some tests.
llvm-svn: 209044
LowerVSELECT will, if possible, generate a X86ISD::BLENDI DAG node if the
condition is constant and we can emit that instruction, given the
subtarget.
This is not enough for all cases. An additional SELECTCombine optimization
will be committed.
Fixed tests that were expecting variable blends but where a blend+imm can
be generated.
Added test where we can't emit blend+immediate.
Added avx2 blend+imm tests.
llvm-svn: 209043
No functionality change intended. The types that previously were set to
lower as Expand or Legal are doing the same thing with this lowering
function.
llvm-svn: 209042
In AT&T syntax, we should probably print the full "movl" or "movw". TableGen
used to ignore these aliases because it was miscounting the number of operands.
This fixes the issue.
This will be tested when the TableGen "should I print this Alias"
heuristic is fixed (very soon).
llvm-svn: 208963
Added target specific combine rules to fold blend intrinsics according
to the following rules:
1) fold(blend A, A, Mask) -> A;
2) fold(blend A, B, <allZeros>) -> A;
3) fold(blend A, B, <allOnes>) -> B.
Added two new tests to verify that the new folding rules work for all
the optimized blend intrinsics.
llvm-svn: 208895
Previously, TableGen assumed that every aliased operand consumed precisely 1
MachineInstr slot (this was reasonable because until a couple of days ago,
nothing more complicated was eligible for printing).
This allows a couple more ARM64 aliases to print so we can remove the special
code.
On the X86 side, I've gone for explicit AT&T size specifiers as the default, so
turned off a few of the aliases that would have just started printing.
llvm-svn: 208880
For example
tzcntl %edi, %ebx
testl %edi, %edi
je .label
can be rewritten into
tzcntl %edi, %ebx
jb .label
A minor complication is that tzcnt sets CF instead of ZF when the input
is zero, we have to rewrite users of the flags from ZF to CF. Currently
we recognize patterns using lzcnt, tzcnt and popcnt.
Differential Revision: http://reviews.llvm.org/D3454
llvm-svn: 208788
r208453 added support for having sret on the second parameter. In that
change, the code for copying sret into a virtual register was hoisted
into the loop that lowers formal parameters. This caused a "Wrong
topological sorting" assertion failure during scheduling when a
parameter is passed in memory. This change undoes that by creating a
second loop that deals with sret.
I'm worried that this fix is incomplete. I don't fully understand the
dependence issues. However, with this change we produce the same DAGs
we used to produce, so if they are broken, they are just as broken as
they have always been.
llvm-svn: 208637
1) Changed gather and scatter intrinsics. Now they are aligned with GCC built-ins. There is no more non-masked form. Masked intrinsic receives -1 if all lanes are executed.
2) I changed the function that works with intrinsics inside X86ISelLowering.cpp. I put all intrinsics in one table. I did it for INTRINSICS_W_CHAIN and plan to put all intrinsics from WO_CHAIN set to the same table in order to avoid the long-long "switch". (I wanted to use static map initialization that allowed by C++11 but I wasn't able to compile it on VS2012).
3) I added gather/scatter prefetch intrinsics.
4) I fixed MRMm encoding for masked instructions.
llvm-svn: 208522
We must validate the value type in TLI::getRegisterByName, because if we
don't and the wrong type was used with the IR intrinsic, then we'll assert
(because we won't be able to find a valid register class with which to
construct the requested copy operation). For PPC64, additionally, the type
information is necessary to decide between the 64-bit register and the 32-bit
subregister.
No functionality change.
llvm-svn: 208508
When lowering build_vector to an insertps, we would still lower it, even
if the source vectors weren't v4x32. This would break on avx if the source
was a v8x32. We now check the type of the source vectors.
llvm-svn: 208487
This reverts commit r200561.
This calling convention was an attempt to match the MSVC C++ ABI for
methods that return structures by value. This solution didn't scale,
because it would have required splitting every CC available on Windows
into two: one for methods and one for free functions.
Now that we can put sret on the second arg (r208453), and Clang does
that (r208458), revert this hack.
llvm-svn: 208459
MSVC always places the implicit sret parameter after the implicit this
parameter of instance methods. We used to handle this for
x86_thiscallcc by allocating the sret parameter on the stack and leaving
the this pointer in ecx, but that doesn't handle alternative calling
conventions like cdecl, stdcall, fastcall, or the win64 convention.
Instead, change the verifier to allow sret on the second parameter.
This also requires changing the Mips and X86 backends to return the
argument with the sret parameter, instead of assuming that the sret
parameter comes first.
The Sparc backend also returns sret parameters in a register, but I
wasn't able to update it to handle secondary sret parameters. It
currently calls report_fatal_error if you feed it an sret in the second
parameter.
Reviewers: rafael.espindola, majnemer
Differential Revision: http://reviews.llvm.org/D3617
llvm-svn: 208453
Summary:
Also ran clang-format on the function. The code added is the last else
if block.
Reviewers: nadav, craig.topper, delena
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3518
llvm-svn: 208372
This patch teaches the backend how to combine packed SSE2/AVX2 arithmetic shift
intrinsics.
The rules are:
- Always fold a packed arithmetic shift by zero to its first operand;
- Convert a packed arithmetic shift intrinsic dag node into a ISD::SRA only if
the shift count is known to be smaller than the vector element size.
This patch also teaches to function 'getTargetVShiftByConstNode' how fold
target specific vector shifts by zero.
Added two new tests to verify that the DAGCombiner is able to fold
sequences of SSE2/AVX2 packed arithmetic shift calls.
llvm-svn: 208342
The old method used by X86TTI to determine partial-unrolling thresholds was
messy (because it worked by testing target features), and also would not
correctly identify the target CPU if certain target features were disabled.
After some discussions on IRC with Chandler et al., it was decided that the
processor scheduling models were the right containers for this information
(because it is often tied to special uop dispatch-buffer sizes).
This does represent a small functionality change:
- For generic x86-64 (which uses the SB model and, thus, will get some
unrolling).
- For AMD cores (because they still currently use the SB scheduling model)
- For Haswell (based on benchmarking by Louis Gerbarg, it was decided to bump
the default threshold to 50; we're working on a test case for this).
Otherwise, nothing has changed for any other targets. The logic, however, has
been moved into BasicTTI, so other targets may now also opt-in to this
functionality simply by setting LoopMicroOpBufferSize in their processor
model definitions.
llvm-svn: 208289
Summary:
Vectors built with zeros and elements in the same order as another
(source) vector are optimized to be built using a single insertps
instruction.
Also optimize when we move one element in a vector to a different place
in that vector while zeroing out some of the other elements.
Further optimizations are possible, described in TODO comments.
I will be implementing at least some of them in the near future.
Added some tests for different cases where this optimization triggers.
Reviewers: nadav, delena, craig.topper
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3521
llvm-svn: 208271
The loop stream detector (LSD) on modern Intel cores, which optimizes the
execution of small loops, has limits on the number of taken branches in
addition to uop-count limits (modern AMD cores have similar limits).
Unfortunately, at the IR level, estimating the number of branches that will be
taken is difficult. For one thing, it strongly depends on later passes (block
placement, etc.). The original implementation took a conservative approach and
limited the maximal BB DFS depth of the loop. However, fairly-extensive
benchmarking by several of us has revealed that this is the wrong approach. In
fact, there are zero known cases where the branch limit prevents a detrimental
unrolling (but plenty of cases where it does prevent beneficial unrolling).
While we could improve the current branch counting logic by incorporating
branch probabilities, this further complication seems unjustified without a
motivating regression. Instead, unless and until a regression appears, the
branch counting will be removed.
llvm-svn: 208255
Given a FMA family (e.g., 213, 231), not all the variants (i.e., register or
memory) are commutable.
E.g., for the 213 family (with the syntax src1, src2, src3):
fmaXXX213 A, B, reg3/mem3 == fmaXXX213 B, A, reg3/mem3
Now consider the 231 family:
fmaXXX231 A, B, reg3 == fmaXXX231 A, reg3, B
But
fmaXXX231 A, B, mem3 != fmaXXX231 A, mem3, B
Indeed, mem3 cannot be the second argument of the memory variant of fmaXXX231.
Working on a reduced test case!
<rdar://problem/16800495>
llvm-svn: 208252
default architecture for reasonable modern x86 processors, actually be
modern. This processor model should essentially be "tuned" for modern
x86 chips as much as possible without undue penalties on any specific
architecture. Previously we weren't even using the nice scheduling
models. There are a few other tweaks needed here, but this change at
least I have benchmarked across a decent swatch of chips (intel's
clovertown, westmere, and sandybridge; amd's istanbul) and seen no
significant regressions.
If anyone has suggested ways to test this, just let me know. Somewhat
alarmingly, no existing tests failed.
llvm-svn: 208230
Before this patch, the backend always emitted a store+load sequence to
bitconvert from f64 to i64 the input operand of a ISD::BITCAST dag node that
performed a bitconvert from type MVT::f64 to type MVT::v2i32. The resulting
i64 node was then used to build a v2i32 vector.
With this patch, the backend now produces a cheaper SCALAR_TO_VECTOR from
MVT::f64 to MVT::v2f64. That SCALAR_TO_VECTOR is then followed by a "free"
bitcast to type MVT::v4i32. The elements of the resulting
v4i32 are then extracted to build a v2i32 vector (which is illegal and
therefore promoted to MVT::v2i64).
This is in general cheaper than emitting a stack store+load sequence
to bitconvert the operand from type f64 to type i64.
llvm-svn: 208107
This patch implements the infrastructure to use named register constructs in
programs that need access to specific registers (bare metal, kernels, etc).
So far, only the stack pointer is supported as a technology preview, but as it
is, the intrinsic can already support all non-allocatable registers from any
architecture.
llvm-svn: 208104
The Win64 docs are very clear that anything larger than 8 bytes is
passed by reference, and GCC MinGW64 honors that for __modti3 and
friends.
Patch by Jameson Nash!
llvm-svn: 208029
Summary:
Also ran clang-format on the function. The code added is the last else
if block.
Reviewers: nadav, craig.topper
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3518
llvm-svn: 207992
Both MinGW and cygwin (i686) construct export directives without the global
leader prefix. This is mostly due to the fact that they use GNU ld which does
not correctly handle the export directive. This apparently has been been broken
for a while. However, this was recently reported as being broken by
mingwandroid and diorcety of the msys2 project.
Remove the global leader prefix if targeting MinGW or cygwin, otherwise, retain
the global leader prefix. Add an explicit test for cygwin's behaviour of export
directives.
llvm-svn: 207926
Create a helper function to generate the export directive. This was previously
duplicated inline to handle export directives for variables and functions. This
also enables the use of range-based iterators for the generation of the
directive rather than the traditional loops. NFC.
llvm-svn: 207925
The fix itself is fairly simple: move getAccessVariant to MCValue so that we
replace the old weak expression evaluation with the far more general
EvaluateAsRelocatable.
This then requires that EvaluateAsRelocatable stop when it finds a non
trivial reference kind. And that in turn requires the ELF writer to look
harder for weak references.
Last but not least, this found a case where we were being bug by bug
compatible with gas and accepting an invalid input. I reported pr19647
to track it.
llvm-svn: 207920
There is no need to check if we want to hoist the immediate value of an
shift instruction. Simply return TCC_Free right away.
This change is like r206101, but for X86.
rdar://problem/16190769
llvm-svn: 207692
Only emit calls to compiler-rt asm routines on platforms where they are
present (currently limited to linux i386/x86_64).
Patch by Yuri Gorshenin.
llvm-svn: 207651
Currently, musttail codegen is relying on sibcall optimization, and
reporting a fatal error if fails. Sibcall optimization fails when stack
arguments need to be modified, which is insufficient for musttail.
The logic for moving arguments in memory safely is already implemented
for GuaranteedTailCallOpt. This change merely arranges for musttail
calls to use it.
No functional change for GuaranteedTailCallOpt.
Reviewers: espindola
Differential Revision: http://reviews.llvm.org/D3493
llvm-svn: 207598
X86_MAX_OPERANDS is changed to unsigned.
Also, add range-based for loops for affected loops. This in turn
needed an ArrayRef instead of a pointer-to-array in
InternalInstruction.
llvm-svn: 207413
This introduces a target specific streamer, X86WinCOFFStreamer, which handles
the target specific behaviour (e.g. WinEH). This is mostly to ensure that
differences between ARM and X86 remain disjoint and do not accidentally cross
boundaries. This is the final staging change for enabling object emission for
Windows on ARM.
llvm-svn: 207344
Scaling factors are not free on X86 because every "complex" addressing mode
breaks the related instruction into 2 allocations instead of 1.
<rdar://problem/16730541>
llvm-svn: 207301
Summary:
If we're doing a v4f32/v4i32 shuffle on x86 with SSE4.1, we can lower
certain shufflevectors to an insertps instruction:
When most of the shufflevector result's elements come from one vector (and
keep their index), and one element comes from another vector or a memory
operand.
Added tests for insertps optimizations on shufflevector.
Added support and tests for v4i32 vector optimization.
Reviewers: nadav
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3475
llvm-svn: 207291
Change the object streamer selection to a switch from a series of if conditions.
Rather than defaulting to ELF, require that an ELF format is requested. The
Windows/!ELF is maintained as MachO would have been selected first and will
still provide a MachO format. Add an assertion that if COFF is requested that
the target platform is Windows as only WinCOFF object emission is currently
supported.
llvm-svn: 207200