823aed16f9
make -fno-rtti the default unless a directory builds with REQUIRES_RTTI.
...
llvm-svn: 94378
2010-01-24 20:43:08 +00:00
7ba0661f27
Stop building RTTI information for *most* llvm libraries. Notable
...
missing ones are libsupport, libsystem and libvmcore. libvmcore is
currently blocked on bugpoint, which uses EH. Once it stops using
EH, we can switch it off.
This #if 0's out 3 unit tests, because gtest requires RTTI information.
Suggestions welcome on how to fix this.
llvm-svn: 94164
2010-01-22 06:49:46 +00:00
cc81526176
nothing opt uses can throw, remove the try block and -fexceptions when
...
building opt.
llvm-svn: 84816
2009-10-22 00:46:41 +00:00
0054b460ff
Use IRReader.h in opt, to support reading of LLVM Assembly files directly.
...
llvm-svn: 80922
2009-09-03 16:00:08 +00:00
7182686dbf
Fixed file header comment.
...
llvm-svn: 68250
2009-04-01 21:37:19 +00:00
8fa21acd25
remove attributions from tools/utils makefiles.
...
llvm-svn: 45414
2007-12-29 20:07:17 +00:00
f5599efb00
switch tools to bitcode from bytecode
...
llvm-svn: 36872
2007-05-06 09:32:02 +00:00
0f49a6fe89
if -bitcode is specified, read and write a bitcode file instead of a bytecode file.
...
llvm-svn: 36830
2007-05-06 02:42:03 +00:00
8de97bba5a
For PR1072:
...
Removing -raise has neglible positive or negative side effects so we are
opting to remove it. See the PR for comparison details.
llvm-svn: 33844
2007-02-03 23:15:56 +00:00
2bcf535e0f
Remove DSA.
...
llvm-svn: 32542
2006-12-13 16:54:24 +00:00
28689ff2d0
Use LINK_COMPONENTS to specify *components* to link against instead of
...
using USED_LIBS to specify *libraries* to link against.
llvm-svn: 30090
2006-09-04 05:59:09 +00:00
8e5e13b4fe
Merge the 'analyze' mode code with the 'opt' mode code. Eliminate the
...
'autodetect .ll files' functionality.
llvm-svn: 29915
2006-08-27 22:07:01 +00:00
378f7d5d20
For PR872:
...
Shrinkify LLVM's footprint by removing the analyze tool and moving its
functionality into the opt tool. THis eliminates one of the largest tools
from LLVM and doesn't make opt much bigger because it already included
most of the analysis passes. To get the old analyze functionality pass
the -analyze option to opt. Note that the integeration here is dead
simple. The "main" of analyze was just copied to opt and invoked if the
-analyze option was given. There may be opportunities for further
integration such as removing the distinction between transform passes
and analysis passes.
To use the analysis functionality, if you previously did this:
analyze $FNAME -domset -disable-verify
you would now do this:
opt -analyze $FNAME -domset -disable-verify
Pretty simple.
llvm-svn: 29762
2006-08-18 06:34:30 +00:00
05a8970245
Tools require EH for their top-level try blocks.
...
llvm-svn: 29035
2006-07-07 00:46:19 +00:00
a647c7ff42
Use archive libraries instead of object files for VMCore, BCReader,
...
BCWriter, and bzip2 libraries. Adjust the various makefiles to accommodate
these changes. This was done to speed up link times.
llvm-svn: 28610
2006-06-01 01:30:27 +00:00
02f92a88b6
reorder some libraries
...
llvm-svn: 26309
2006-02-22 00:59:06 +00:00
fe5f33b120
Move some constant folding code shared by Analysis and Transform passes
...
into the LLVMAnalysis library.
This allows LLVMTranform and LLVMTransformUtils to be archives and linked
with LLVMAnalysis.a, which provides any missing definitions.
llvm-svn: 24036
2005-10-27 15:54:34 +00:00
94b7bea733
1. Remove libraries no longer created from the list of libraries linked into the
...
SparcV9 JIT.
2. Make LLVMTransformUtils a relinked object file and always link it before
LLVMAnalysis.a. These two libraries have circular dependencies on each
other which creates problem when building the SparcV9 JIT. This change
fixes the dependency on all platforms problems with a minimum of fuss.
llvm-svn: 24023
2005-10-26 20:35:13 +00:00
788318cb69
Remove a now-unneeded library
...
llvm-svn: 23942
2005-10-24 02:31:05 +00:00
672471fbed
Use archive versions of these libraries, using the LinkAllPasses header.
...
llvm-svn: 23916
2005-10-24 00:12:20 +00:00
ce9612b23c
Two changes:
...
1. Get rid of TOOLLINKOPTS as it is a hold over from llvm-test and only
used to communicate additional libraries to the linker. The *standard*
way to do that is with the LIBS variable which this change supports.
2. Allow the TARGETS_TO_BUILD variable to be set from the configuration
substitution. This is the result of the --enable-target= parameter to
the configure script.
llvm-svn: 21449
2005-04-22 17:14:14 +00:00
d3f2e95e6c
Add LLVMbzip2 library, now required.
...
llvm-svn: 18255
2004-11-25 20:22:06 +00:00
57cbe39d1e
Change Library Names Not To Conflict With Others When Installed
...
llvm-svn: 17286
2004-10-27 23:18:45 +00:00
74c3dc6927
Add the LLVMsystem.a library as it is now used for operating system
...
independence of the tool.
llvm-svn: 16092
2004-08-29 19:29:38 +00:00
e67d8400f6
Make sure to link all IPA's into opt, so that it has access to stuff like
...
anders-aa
llvm-svn: 14395
2004-06-25 05:19:17 +00:00
abe5cdcf21
Added LLVM copyright to Makefiles.
...
llvm-svn: 9314
2003-10-20 22:29:16 +00:00
361e9c8b97
Remove instloops library
...
llvm-svn: 7210
2003-07-21 19:07:27 +00:00
6d79113343
Added pass to instrument backedges for lightweight tracing
...
llvm-svn: 7202
2003-07-18 16:25:40 +00:00
ecfc0d2d3c
Converted tabs to spaces.
...
llvm-svn: 7139
2003-07-10 16:35:17 +00:00
e38c7d9f2d
Use $(PLATFORMLIBDL) to selectively bring in -ldl only on those platforms where
...
it is needed.
llvm-svn: 6753
2003-06-17 20:09:18 +00:00
51bdb6156b
Remove codegen libraries to speed up linking opt
...
llvm-svn: 5796
2003-04-16 22:55:55 +00:00
356163f48a
ipa.a only needs to be mentioned once, and spaces should be used instead of
...
tabs for readability.
llvm-svn: 4970
2002-12-12 05:29:32 +00:00
42b7335d7c
Repeat ipa.a. Since IPModRef is currently only used in analysis.o,
...
it was causing linking errors.
llvm-svn: 4959
2002-12-09 04:46:25 +00:00
6d192f5bb4
Remove extra target.a entry
...
llvm-svn: 4756
2002-11-19 16:59:41 +00:00
a416ad30df
No need to explicitly inclue ExportSymbols now
...
llvm-svn: 4543
2002-11-04 20:50:57 +00:00
57a10398a5
Add codegen library
...
llvm-svn: 4305
2002-10-28 00:54:59 +00:00
e6e375e704
Temporary change to make datastructure stuff link in right
...
llvm-svn: 4005
2002-10-01 22:41:01 +00:00
3e1dc145bd
Renamed library preselect to preopts.
...
llvm-svn: 3841
2002-09-20 00:43:20 +00:00
3517f30fd9
KEEP_SYMBOLS by default.
...
llvm-svn: 3813
2002-09-18 11:55:44 +00:00
66037f55d3
Enable correct support for dynamic loading on Linux
...
llvm-svn: 3780
2002-09-17 20:40:24 +00:00
14a25a370b
Remove duplicate sparc entry.
...
llvm-svn: 3762
2002-09-16 18:28:27 +00:00
9a056ed4e0
Use .o files instead of .a files for several cases (that don't actually
...
need them) until other Makefiles can be updated to build archives.
llvm-svn: 3761
2002-09-16 18:13:12 +00:00
82491b79a1
Add support for optimization passes that use a TargetMachine object.
...
llvm-svn: 3752
2002-09-16 16:09:43 +00:00
447dd14bac
Link to analysis.o not analysis.a
...
llvm-svn: 3537
2002-08-30 20:25:41 +00:00
00a43e1e7c
Fixed linking problems that wanted me to link to analyze.o instead of analyze.a
...
so now we can link to analyze.a again.
llvm-svn: 3433
2002-08-21 23:47:46 +00:00
24749c4d4e
Link in all analyses so that we get pointer analysis support built in
...
llvm-svn: 3427
2002-08-21 22:17:28 +00:00
a896b08b5c
*** empty log message ***
...
llvm-svn: 3002
2002-07-23 17:52:38 +00:00
4e25609b87
Removed emitfuncs: now its part of instrument library
...
llvm-svn: 2929
2002-07-16 18:59:55 +00:00
e9f685d397
Added emitfuncs pass
...
llvm-svn: 2884
2002-07-12 20:12:59 +00:00
dfe130c161
correcting makefile: incorrectly checked in wrong version earlier
...
llvm-svn: 2798
2002-06-25 21:44:44 +00:00
Chris Lattner