As discussed in the Polly weekly phone call and reviews.llvm.org/D18878,
the assumed contexts changed (widen) due to D18878/r265942. Also check
these contexts in the tests affected by that change.
llvm-svn: 266323
We used checks to minimize the number of remarks we present to a user
but these checks can become expensive, especially since all wrapping
assumptions are emitted separately. Because there is not benefit for a
"headless" run we put these checks under a command line flag. Thus, if
the flag is not given we will emit "non-effective" remarks, e.g.,
duplicates and revert to the old behaviour if it is given. As this
also changes the internal representation of some sets we set the flag
by default for our unit tests.
llvm-svn: 266087
Utilizing the record option for assumptions we can simplify the wrapping
assumption generation a lot. Additionally, we can now report locations
together with wrapping assumptions, though they might not be accurate yet.
llvm-svn: 266069
There are three reasons why we want to record assumptions first before we
add them to the assumed/invalid context:
1) If the SCoP is not profitable or otherwise invalid without the
assumed/invalid context we do not have to compute it.
2) Information about the context are gathered rather late in the SCoP
construction (basically after we know all parameters), thus the user
might see overly complicated assumptions to be taken while they would
have been simplified later on.
3) Currently we cannot take assumptions at any point but have to wait,
e.g., for the domain generation to finish. This makes wrapping
assumptions much more complicated as they need to be and it will
have a similar effect on "signed-unsigned" assumptions later.
llvm-svn: 266068
Collect the error domain contexts (formerly in the ErrorDomainCtxMap)
for each statement in the new InvalidContext member variable. While
this commit is basically a [NFC] it is a first step to make hoisting
sound by allowing a more fine grained record of invalid contexts,
e.g., here on statement level.
llvm-svn: 266053
Allow overflow of indices into the next higher dimension if it has
constant size. E.g.
float A[32][2];
((float*)A)[5];
is effectively the same as
A[2][1];
This can happen since r265379 as a side effect if ScopDetection
recognizes an access as affine, but ScopInfo rejects the GetElementPtr.
Differential Revision: http://reviews.llvm.org/D18878
llvm-svn: 265942
MSVC warns with:
warning C4239: nonstandard extension used: 'initializing': conversion from 'llvm::DebugLoc' to 'llvm::DebugLoc &'
note: A non-const reference may only be bound to an lvalue
Change the reference to a const reference.
llvm-svn: 265937
In r247147 we disabled pointer expressions because the IslExprBuilder did not
fully support them. This patch reintroduces them by simply treating them as
integers. The only special handling for pointers that is left detects the
comparison of two address_of operands and uses an unsigned compare.
llvm-svn: 265894
This reverts commit 2879c53e80e05497f408f21ce470d122e9f90f94.
Additionally, it adds SDiv and SRem instructions to the set of values
discovered by the findValues function even if we add the operands to
be able to recompute the SCEVs. In subfunctions we do not want to
recompute SDiv and SRem instructions but pass them instead as they
might have been created through the IslExprBuilder and are more
complicated than simple SDiv/SRem instructions in the code.
llvm-svn: 265873
Static libraries where installed into "lib${LLVM_LIBDIR_SUFFIX}" while
shared ones into "lib". I found no justification for this behaviour.
This patch changes both types of libraries to be install into
"lib${LLVM_LIBDIR_SUFFIX}". LLVM and clang use the same behaviour.
This fixes llvm.org/PR27305.
llvm-svn: 265872
We verify the optimized function now for a long time and it helped to track
down bugs early. This will now also happen for all parallel subfunctions we
generate.
llvm-svn: 265823
The way to get the elements size with getPrimitiveSizeInBits() is not
the same as used in other parts of Polly which should use
DataLayout::getTypeAllocSize(). Its use only queries the size of the
pointer and getPrimitiveSizeInBits returns 0 for types that require a
DataLayout object such as pointers.
Together with r265379, this should fix PR27195.
llvm-svn: 265795
If we build the domains for error blocks and later remove them we lose
the information that they are not executed. Thus, in the SCoP it looks
like the control will always reach the statement S:
for (i = 0 ... N)
if (*valid == 0)
doSth(&ptr);
S: A[i] = *ptr;
Consequently, we would have assumed "ptr" to be always accessed and
preloaded it unconditionally. However, only if "*valid != 0" we would
execute the optimized version of the SCoP. Nevertheless, we would have
hoisted and accessed "ptr"regardless of "*valid". This changes the
semantic of the program as the value of "*valid" can cause a change of
"ptr" and control if it is executed or not.
To fix this problem we adjust the execution context of hoisted loads
wrt. error domains. To this end we introduce an ErrorDomainCtxMap that
maps each basic block to the error context under which it might be
executed. Thus, to the context under which it is executed but an error
block would have been executed to. To fill this map one traversal of
the blocks in the SCoP suffices. During this traversal we do also
"remove" error statements and those that are only reachable via error
statements. This was previously done by the removeErrorBlockDomains
function which is therefor not needed anymore.
This fixes bug PR26683 and thereby several SPEC miscompiles.
Differential Revision: http://reviews.llvm.org/D18822
llvm-svn: 265778
If ScalarEvolution cannot look through some expression but we do, it
might happen that a multiplication will arrive at the
SCEVAffinator::visitMulExpr. While we could always try to improve the
extractConstantFactor function we might still miss something, thus we
reintroduce the code to generate multiplicative piecewise-affine
functions as a fall-back.
llvm-svn: 265777
The findValues() function did not look through div & srem instructions
that were part of the argument SCEV. However, in different other
places we already look through it. This mismatch caused us to preload
values in the wrong order.
llvm-svn: 265775
If all exiting blocks of a SCoP are error blocks and therefor not
represented we will not generate accesses and consequently no SAI
objects for exit PHIs. However, they are needed in the code generation
to generate the merge PHIs between the original and optimized region.
With this patch we enusre that the SAI objects for exit PHIs exist
even if all exiting blocks turn out to be eror blocks.
This fixes the crash reported in PR27207.
llvm-svn: 265393
We currently only consider the first GEP when delinearizing access functions,
which makes us loose information about additional index expression offsets,
which results in our SCoP model to be incorrect. With this patch we now
compare the base pointers used to ensure we do not miss any additional offsets.
This fixes llvm.org/PR27195.
We may consider supporting nested GEP in our delinearization heuristics in
the future.
llvm-svn: 265379
Even before we build the domain the branch condition can become very
complex, especially if we have to build the complement of a lot of
equality constraints. With this patch we bail if the branch condition
has a lot of basic sets and parameters.
After this patch we now successfully compile
External/SPEC/CINT2000/186_crafty/186_crafty
with "-polly-process-unprofitable -polly-position=before-vectorizer".
llvm-svn: 265286
As a CFG is often structured we can simplify the steps performed during
domain generation. When we push domain information we can utilize the
information from a block A to build the domain of a block B, if A dominates B
and there is no loop backede on a path from A to B. When we pull domain
information we can use information from a block A to build the domain of a
block B if B post-dominates A. This patch implements both ideas and thereby
simplifies domains that were not simplified by isl. For the FINAL basic block
in test/ScopInfo/complex-successor-structure-3.ll we used to build a universe
set with 81 basic sets. Now it actually is represented as universe set.
While the initial idea to utilize the graph structure depended on the
dominator and post-dominator tree we can use the available region
information as a coarse grained replacement. To this end we push the
region entry domain to the region exit and pull it from the region
entry for the region exit if applicable.
With this patch we now successfully compile
External/SPEC/CINT2006/400_perlbench/400_perlbench
and
SingleSource/Benchmarks/Adobe-C++/loop_unroll.
Differential Revision: http://reviews.llvm.org/D18450
llvm-svn: 265285
If a loop has no exiting blocks the region covering we use during
schedule genertion might not cover that loop properly. For now we bail
out as we would not optimize these loops anyway.
llvm-svn: 265280
If an exit PHI is written and also read in the SCoP we should not create two
SAI objects but only one. As the read is only modeled to ensure OpenMP code
generation knows about it we can simply use the EXIT_PHI MemoryKind for both
accesses.
llvm-svn: 265261
If a loop has no exiting blocks the region covering we use during
schedule genertion might not cover that loop properly. For now we bail
out as we would not optimize these loops anyway.
llvm-svn: 265260
If a non-affine region PHI is generated we should not move the insert
point prior to the synthezised value in the same block as we might
split that block at the insert point later on. Only if the incoming
value should be placed in a different block we should change the
insertion point.
llvm-svn: 265132
... instead of hardcoding something that has been free at some point. This fixes
a crash triggered by r265084, where the diagnostic IDs have been shifted in a
way that resulted our hardcode ID to not be assigned any implementation. Our ID
was likely already wrong earlier on, but this time we really crashed nicely.
llvm-svn: 265114
These caused LNT failures due to new assertions when running with
-polly-position=before-vectorizer -polly-process-unprofitable for:
FAIL: clamscan.compile_time
FAIL: cjpeg.compile_time
FAIL: consumer-jpeg.compile_time
FAIL: shapes.compile_time
FAIL: clamscan.execution_time
FAIL: cjpeg.execution_time
FAIL: consumer-jpeg.execution_time
FAIL: shapes.execution_time
The failures have been introduced by r264782, but r264789 had to be reverted
as it depended on the earlier patch.
llvm-svn: 264885
As a CFG is often structured we can simplify the steps performed
during domain generation. When we push domain information we can
utilize the information from a block A to build the domain of a
block B, if A dominates B. When we pull domain information we can
use information from a block A to build the domain of a block B
if B post-dominates A. This patch implements both ideas and thereby
simplifies domains that were not simplified by isl. For the FINAL
basic block in
test/ScopInfo/complex-successor-structure-3.ll .
we used to build a universe set with 81 basic sets. Now it actually is
represented as universe set.
While the initial idea to utilize the graph structure depended on the
dominator and post-dominator tree we can use the available region
information as a coarse grained replacement. To this end we push the
region entry domain to the region exit and pull it from the region
entry for the region exit.
Differential Revision: http://reviews.llvm.org/D18450
llvm-svn: 264789
Instead of waiting for the domain construction to finish we will now
bail as early as possible in case a complexity problem is encountered.
This might save compile time but more importantly it makes the "abort"
explicit. While we can always check if we invalidated the assumed
context we can simply propagate the result of the construction back.
This also removes the HasComplexCFG flag that was used for the very
same reason.
Differential Revision: http://reviews.llvm.org/D18504
llvm-svn: 264775
Michael Kruse