This is a small follow-up to the revisions r333117 and r331663.
1. Avoid the name conflicts of the generated variables for prefixes.
2. Apply clang-format -i -style=llvm to llvm-objcopy.cpp once again.
3. Add a test for the flag with double dash.
Test plan: make check-all
llvm-svn: 333120
This patch implements the "block reciprocal throughput" computation in the
SummaryView.
The block reciprocal throughput is computed as the MAX of:
- NumMicroOps / DispatchWidth
- Resource Cycles / #Units (for every resource consumed).
The block throughput is bounded from above by the hardware dispatch throughput.
That is because the DispatchWidth is an upper bound on how many opcodes can be part
of a single dispatch group.
The block throughput is also limited by the amount of hardware parallelism. The
number of available resource units affects how the resource pressure is
distributed, and also how many blocks can be delivered every cycle.
llvm-svn: 333095
Summary:
This is an intermediate change, it moves the non-notification logic from
Backend::notifyCycleBegin to runCycle().
Once the scheduler becomes part of the Execution stage
the explicit call to Scheduler::cycleEvent will disappear.
The logic for Dispatch::cycleEvent() can be in
the preExecute phase, which this patch addresses.
Reviewers: andreadb, RKSimon, courbet
Reviewed By: andreadb
Subscribers: tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D47213
llvm-svn: 333029
If one runs llvm-objcopy --strip-all --keep-symbol foo
and the symbol table indeed contains the symbol "foo"
then it should not be removed.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D47052
llvm-svn: 333008
Summary: This makes the report much more readable.
Reviewers: gchatelet
Subscribers: tschuett, mgrang, craig.topper, RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D47189
llvm-svn: 332979
Also clean up a couple of hacks where we were writing the section
contents to another stream by setting the object writer's stream,
writing and setting it back.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47038
llvm-svn: 332858
Summary: Add LLVMDIBuilderCreateObjCIVar, LLVMDIBuilderCreateObjCProperty, and LLVMDIBuilderCreateInheritance to allow declaring metadata for Objective-C class hierarchies and their associated properties and instance variables.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: harlanhaskins, llvm-commits
Differential Revision: https://reviews.llvm.org/D47123
llvm-svn: 332850
Change the "recoverable" error callback to take an Error instaed of a
string.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D46831
llvm-svn: 332845
Summary: Add wrappers for a module's alias iterators and a getter and setter for the aliasee value.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46808
llvm-svn: 332826
Summary:
- Provide LLVMGetValueName2 and LLVMSetValueName2 that return and take the length of the provided C string respectively
- Deprecate LLVMGetValueName and LLVMSetValueName
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46890
llvm-svn: 332810
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
Summary:
The logic of dispatch remains the same, but now DispatchUnit is a Stage (DispatchStage).
This change has the benefit of simplifying the backend runCycle() code.
The same logic applies, but it belongs to different components now. This is just a start,
eventually we will need to remove the call to the DispatchStage in Scheduler.cpp, but
that will be a separate patch. This change is mostly a renaming and moving of existing logic.
This change also encouraged me to remove the Subtarget (STI) member from the
Backend class. That member was used to initialize the other members of Backend
and to eventually call DispatchUnit::dispatch(). Now that we have Stages, we
can eliminate this by instantiating the DispatchStage with everything it needs
at the time of construction (e.g., Subtarget). That change allows us to call
DispatchStage::execute(IR) as we expect to call execute() for all other stages.
Once we add the Stage list (D46907) we can more cleanly call preExecute() on
all of the stages, DispatchStage, will probably wrap cycleEvent() in that
case.
Made some formatting and minor cleanups to README.txt. Some of the text
was re-flowed to stay within 80 cols.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb, courbet
Subscribers: mgorny, javed.absar, tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D46983
llvm-svn: 332652
Currently debugify prints it's output to stdout,
with this patch all the output generated goes to stderr.
This change lets us use debugify without taking away
the ability to pipe the output to other llvm tools.
llvm-svn: 332642
Summary:
Warn on instructions that should have the same performance
characteristics according to the sched model but actually
differ in their benchmarks.
Next step: Make the display nicer to browse, I was thinking maybe html.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D46945
llvm-svn: 332601
Restructuring the code to measure latency and uops.
The end goal is to have this program spawn another process to deal with SIGILL and other malformed programs. It is not yet the case in this redesign, it is still the main program that runs the code (and may crash).
It now uses BitVector instead of Graph for performance reasons.
https://reviews.llvm.org/D46821
(with fixed ARM tests)
Authored by Guillaume Chatelet
llvm-svn: 332592
Restructuring the code to measure latency and uops.
The end goal is to have this program spawn another process to deal with SIGILL and other malformed programs. It is not yet the case in this redesign, it is still the main program that runs the code (and may crash).
It now uses BitVector instead of Graph for performance reasons.
https://reviews.llvm.org/D46821
Authored by Guillaume Chatelet
llvm-svn: 332579
Fuchsia uses ELF as a file format and LLD as the linker so we can
use the same implementation as other ELF based platforms.
Differential Revision: https://reviews.llvm.org/D46991
llvm-svn: 332570
VSOs now track dependencies for materializing symbols. Each symbol must have its
dependencies registered with the VSO prior to finalization. Usually this will
involve registering the dependencies returned in
AsynchronousSymbolQuery::ResolutionResults for queries made while linking the
symbols being materialized.
Queries against symbols are notified that a symbol is ready once it and all of
its transitive dependencies are finalized, allowing compilation work to be
broken up and moved between threads without queries returning until their
symbols fully safe to access / execute.
Related utilities (VSO, MaterializationUnit, MaterializationResponsibility) are
updated to support dependence tracking and more explicitly track responsibility
for symbols from the point of definition until they are finalized.
llvm-svn: 332541
Summary: This change will help us turn the DispatchUnit into its own stage.
Reviewers: andreadb, RKSimon, courbet
Reviewed By: andreadb, courbet
Subscribers: mgorny, tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D46916
llvm-svn: 332493
The module ID numbering typically starts at 0 (in both the new and old
LTO APIs, used by linkers). Make llvm-lto consistent with that.
Split out of D46699.
llvm-svn: 332476
Revision 332390 introduced a FetchStage class in llvm-mca.
By design, FetchStage owns all the instructions in-flight in the OoO Backend.
Before this change, new instructions were added to a DenseMap indexed by
instruction id. The problem with using a DenseMap is that elements are not
ordered by key. This was causing a massive slow down in method
FetchStage::postExecute(), which searches for instructions retired that can be
deleted.
This patch replaces the DenseMap with a std::map ordered by instruction index.
At the end of every cycle, we search for the first instruction which is not
marked as "retired", and we remove all the previous instructions before it.
This works well because instructions are retired in-order.
Before this patch, a debug build of llvm-mca (on my Ryzen linux machine) took
~8.0 seconds to simulate 3000 iterations of a x86 dot-product (a `vmulps,
vpermilps, vaddps, vpermilps, vaddps` sequence). With this patch, it now takes
~0.8s to run all the 3000 iterations.
llvm-svn: 332461
This option just keeps being a problem and really needs to be implemented
in some fashion. Implementing it properly requires some kind of
"replaceSectionReference" method because all the existing links need to be
maintained. The desired behavior is just for allocated sections to become
NOBITS but actually implementing that is rather tricky due to the current
design of llvm-objcopy. However converting allocated sections to NOBITS is
just an optimization and not something debuggers need. Debuggers can debug
a stripped executable and take an unstripped executable for that stripped
executable as input. Additionally allocated sections account for a very
small part of debug binaries so this optimization is quite small. I propose
that for the time being we implement this as a NOP so that people can use
llvm-objcopy where they need to, just in a sub-optimal way.
This option has already blocked a lot of people and its currently blocking me.
llvm-svn: 332396
Summary:
This is just an idea, really two ideas. I expect some push-back,
but I realize that posting a diff is the most comprehensive way to express
these concepts.
This patch introduces a Stage class which represents the
various stages of an instruction pipeline. As a start, I have created a simple
FetchStage that is based on existing logic for how MCA produces
instructions, but now encapsulated in a Stage. The idea should become more concrete
once we introduce additional stages. The idea being, that when a stage completes,
the next stage in the pipeline will be executed. Stages are chained together
as a singly linked list to closely model a real pipeline. For now there is only one stage,
so the stage-to-stage flow of instructions isn't immediately obvious.
Eventually, Stage will also handle event notifications, but that functionality
is not complete, and not destined for this patch. Ideally, an interested party
can register for notifications from a particular stage. Callbacks will be issued to
these listeners at various points in the execution of the stage.
For now, eventing functionality remains similar to what it has been in mca::Backend.
We will be building-up the Stage class as we move on, such as adding debug output.
This patch also removes the unique_ptr<Instruction> return value from
InstrBuilder::createInstruction. An Instruction pointer is still produced,
but now it's up to the caller to decide how that item should be managed post-allocation
(e.g., smart pointer). This allows the Fetch stage to create instructions and
manage the lifetime of those instructions as it wishes, and not have to be bound to any
specific managed pointer type. Other callers of createInstruction might have different
requirements, and thus can manage the pointer to fit their needs. Another idea would be to push the
ownership to the RCU.
Currently, the FetchStage will wrap the Instruction
pointer in a shared_ptr. This allows us to remove the Instruction container in
Backend, which was probably going to disappear, or move, at some point anyways.
Note that I did run these changes through valgrind, to make sure we are not leaking
memory. While the shared_ptr comes with some additional overhead it relieves us
from having to manage a list of generated instructions, and/or make lookup calls
to remove the instructions.
I realize that both the Stage class and the Instruction pointer management
(mentioned directly above) are separate but related ideas, and probably should
land as separate patches; I am happy to do that if either idea is decent.
The main reason these two ideas are together is that
Stage::execute() can mutate an InstRef. For the fetch stage, the InstRef is populated
as the primary action of that stage (execute()). I didn't want to change the Stage interface
to support the idea of generating an instruction. Ideally, instructions are to
be pushed through the pipeline. I didn't want to draw too much of a
specialization just for the fetch stage. Excuse the word-salad.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb
Subscribers: llvm-commits, mgorny, javed.absar, tschuett, gbedwell
Differential Revision: https://reviews.llvm.org/D46741
llvm-svn: 332390
Alexander Shaposhnikov