Type::dump() doesn't print a newline, which makes for a poor
experience in a debugger. This looks like it was an ommission
considering Value::dump() two lines above, so I've changed Type to add
a newline as well.
Of the two in-tree callers, one added a newline anyway, and I've
updated the other one to use Type::print instead.
llvm-svn: 215421
For many Thumb-1 register register instructions, setting the CPSR is not
permitted inside an IT block. We would not correctly flag those instructions.
The previous change to identify this scenario was insufficient as it did not
actually catch all the instances. The current list is formed by manual
inspection of the ARMv6M ARM.
The change to the Thumb2 IT block test is due to the fact that the new more
stringent checking of the MIs results in the If Conversion pass being prevented
from executing (since not all the instructions in the BB are predicable). This
results in code gen changes.
Thanks to Tim Northover for pointing out that the previous patch was
insufficient and hinting that the use of the v6M ARM would be much easier to use
than the v7 or v8!
llvm-svn: 215382
By default, LLVM uses the "C" calling convention for all runtime
library functions. The half-precision FP conversion functions use the
soft-float calling convention, and are needed for some targets which
use the hard-float convention by default, so must have their calling
convention explicitly set.
llvm-svn: 215348
The ARM ARM states that CPSR may not be updated by a MUL in thumb mode. Due to
an ordering of Thumb 2 Size Reduction and If Conversion, we would end up
generating a THUMB MULS inside an IT block.
The If Conversion pass uses the TTI isPredicable method to ensure that it can
transform a Basic Block. However, because we only check for IT handling on
Thumb2 functions, we may miss some cases. Even then, it only validates that the
CPSR is not *live* rather than it is not accessed. This corrects the handling
for that particular case since the same restriction does not hold on the vast
majority of the instructions.
This does prevent the IfConversion optimization from kicking in in certain
cases, but generating correct code is more valuable. Addresses PR20555.
llvm-svn: 215328
be deleted. This will be reapplied as soon as possible and before
the 3.6 branch date at any rate.
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reverts commits r215111, 215115, 215116, 215117, 215136.
llvm-svn: 215154
I am sure we will be finding bits and pieces of dead code for years to
come, but this is a good start.
Thanks to Lang Hames for making MCJIT a good replacement!
llvm-svn: 215111
The commit after this changes { } and 0bxx literals to be of type bits<n> and not int. This means we need to write exactly the right number of bits, and not rely on the values being silently zero extended for us.
llvm-svn: 215082
to get the subtarget and that's accessible from the MachineFunction
now. This helps clear the way for smaller changes where we getting
a subtarget will require passing in a MachineFunction/Function as
well.
llvm-svn: 214988
Particularly on MachO, we were generating "blx _dest" instructions on M-class
CPUs, which don't actually exist. They happen to get fixed up by the linker
into valid "bl _dest" instructions (which is why such a massive issue has
remained largely undetected), but we shouldn't rely on that.
llvm-svn: 214959
This reverts r214893, re-applying r214881 with the test case relaxed a bit to
satiate the build bots.
POP on armv4t cannot be used to change thumb state (unilke later non-m-class
architectures), therefore we need a different return sequence that uses 'bx'
instead:
POP {r3}
ADD sp, #offset
BX r3
This patch also fixes an issue where the return value in r3 would get clobbered
for functions that return 128 bits of data. In that case, we generate this
sequence instead:
MOV ip, r3
POP {r3}
ADD sp, #offset
MOV lr, r3
MOV r3, ip
BX lr
http://reviews.llvm.org/D4748
llvm-svn: 214928
POP on armv4t cannot be used to change thumb state (unilke later non-m-class
architectures), therefore we need a different return sequence that uses 'bx'
instead:
POP {r3}
ADD sp, #offset
BX r3
This patch also fixes an issue where the return value in r3 would get clobbered
for functions that return 128 bits of data. In that case, we generate this
sequence instead:
MOV ip, r3
POP {r3}
ADD sp, #offset
MOV lr, r3
MOV r3, ip
BX lr
http://reviews.llvm.org/D4748
llvm-svn: 214881
shorter/easier and have the DAG use that to do the same lookup. This
can be used in the future for TargetMachine based caching lookups from
the MachineFunction easily.
Update the MIPS subtarget switching machinery to update this pointer
at the same time it runs.
llvm-svn: 214838
Those registers are VFP/NEON and vector instructions should be used instead,
but old cores rely on those co-processors to enable VFP unwinding. This change
was prompted by the libc++abi's unwinding routine and is also present in many
legacy low-level bare-metal code that we ought to compile/assemble.
Fixing bug PR20025 and allowing PR20529 to proceed with a fix in libc++abi.
llvm-svn: 214802
expanding pseudo LOAD_STATCK_GUARD using instructions that are normally used
in pic mode. This patch fixes the bug.
<rdar://problem/17886592>
llvm-svn: 214614
so that we can use it to get the old-style JIT out of the subtarget.
This code should be removed when the old-style JIT is removed
(imminently).
llvm-svn: 214560
This is a followup patch for r214366, which added the same behavior to the
AArch64 and X86 FastISel code. This fix reproduces the already existing
behavior of SelectionDAG in FastISel.
llvm-svn: 214531
Note: The current code in DecodeMSRMask() rejects the unpredictable A/R MSR mask '0000' with Fail. The code in the patch follows this style and rejects unpredictable M-class MSR masks also with Fail (instead of SoftFail). If SoftFail is preferred in this case then additional changes to ARMInstPrinter (to print non-symbolic masks) and ARMAsmParser (to parse non-symbolic masks) will be needed.
Patch by Petr Pavlu!
llvm-svn: 214505
The ARM ARM prohibits LDRB/LDRSB instructions with writeback into the destination register. With this commit this constraint is now enforced and we stop assembling LDRH/LDRSH instructions with unpredictable behavior.
llvm-svn: 214500
The ARM ARM prohibits LDRH/LDRSH instructions with writeback into the source register. With this commit this constraint is now enforced and we stop assembling LDRH/LDRSH instructions with unpredictable behavior.
llvm-svn: 214499
The ARM ARM prohibits LDR instructions with writeback into the destination register. With this commit this constraint is now enforced and we stop assembling LDR instructions with unpredictable behavior.
llvm-svn: 214498
Currently when DAGCombine converts loads feeding a switch into a switch of
addresses feeding a load the new load inherits the isInvariant flag of the left
side. This is incorrect since invariant loads can be reordered in cases where it
is illegal to reoarder normal loads.
This patch adds an isInvariant parameter to getExtLoad() and updates all call
sites to pass in the data if they have it or false if they don't. It also
changes the DAGCombine to use that data to make the right decision when
creating the new load.
llvm-svn: 214449
The subtarget information is the ultimate source of truth for the feature set
that is enabled at this point. We would previously not propagate the feature
information to the subtarget. While this worked for the most part (features
would be enabled/disabled as requested), if another operation that changed the
feature bits was encountered (such as a mode switch via a .arm or .thumb
directive), we would end up resetting the behaviour of the architectural
extensions.
Handling this properly requires a slightly more complicated handling. We need
to check if the feature is now being toggled. If so, only then do we toggle the
features. In return, we no longer have to calculate the feature bits ourselves.
The test changes are mostly to the diagnosis, which is now more uniform (a nice
side effect!). Add an additional test to ensure that we handle this case
properly.
Thanks to Nico Weber for alerting me to this issue!
llvm-svn: 214057
Rename to allowsMisalignedMemoryAccess.
On R600, 8 and 16 byte accesses are mostly OK with 4-byte alignment,
and don't need to be split into multiple accesses. Vector loads with
an alignment of the element type are not uncommon in OpenCL code.
llvm-svn: 214055
address of the stack guard was being spilled to the stack.
Previously the address of the stack guard would get spilled to the stack if it
was impossible to keep it in a register. This patch introduces a new target
independent node and pseudo instruction which gets expanded post-RA to a
sequence of instructions that load the stack guard value. Register allocator
can now just remat the value when it can't keep it in a register.
<rdar://problem/12475629>
llvm-svn: 213967
assembly instructions.
This is necessary to ensure ARM assembler switches to Thumb mode before it
starts assembling the file level inline assembly instructions at the beginning
of a .s file.
<rdar://problem/17757232>
llvm-svn: 213924
In order to enable the preservation of noalias function parameter information
after inlining, and the representation of block-level __restrict__ pointer
information (etc.), additional kinds of aliasing metadata will be introduced.
This metadata needs to be carried around in AliasAnalysis::Location objects
(and MMOs at the SDAG level), and so we need to generalize the current scheme
(which is hard-coded to just one TBAA MDNode*).
This commit introduces only the necessary refactoring to allow for the
introduction of other aliasing metadata types, but does not actually introduce
any (that will come in a follow-up commit). What it does introduce is a new
AAMDNodes structure to hold all of the aliasing metadata nodes associated with
a particular memory-accessing instruction, and uses that structure instead of
the raw MDNode* in AliasAnalysis::Location, etc.
No functionality change intended.
llvm-svn: 213859
The ARM ARM prohibits STRH instructions with writeback into the source register. With this commit this constraint is now enforced and we stop assembling STRH instructions with unpredictable behavior.
llvm-svn: 213850
We were assuming all SBFX-like operations would have the shl/asr form, but
often when the field being extracted is an i8 or i16, we end up with a
SIGN_EXTEND_INREG acting on a shift instead. Simple enough to check for though.
llvm-svn: 213754
Although the final shifter operand is a rotate, this actually only matters for
the half-word extends when the amount == 24. Otherwise folding a shift in is
just as good.
llvm-svn: 213753
The ARM ARM prohibits STRB instructions with writeback into the source register. With this commit this constraint is now enforced and we stop assembling STRB instructions with unpredictable behavior.
llvm-svn: 213750
The ARM ARM prohibits STR instructions with writeback into the source register. With this commit this constraint is now enforced and we stop assembling STR instructions with unpredictable behavior.
llvm-svn: 213745
The post-indexed instructions were missing the constraint, causing unpredictable STRH instructions to be emitted.
The earlyclobber constraint on the pre-indexed STR instructions is not strictly necessary, as the instruction selection for pre-indexed STR instructions goes through an additional layer of pseudo instructions which have the constraint defined, however it doesn't hurt to specify the constraint directly on the pre-indexed instructions as well, since at some point someone might create instances of them programmatically and then the constraint is definitely needed.
llvm-svn: 213729
As discussed in a previous checking to support the .localentry
directive on PowerPC, we need to inspect the actual target symbol
in needsRelocateWithSymbol to make the appropriate decision based
on that symbol's st_other bits.
Currently, needsRelocateWithSymbol does not get the target symbol.
However, it is directly available to its sole caller. This patch
therefore simply extends the needsRelocateWithSymbol by a new
parameter "const MCSymbolData &SD", passes in the target symbol,
and updates all derived implementations.
In particular, in the PowerPC implementation, this patch removes
the FIXME added by the previous checkin.
llvm-svn: 213487
Justin Bogner