a lookup, pass that in rather than use a naked call to getSubtargetImpl.
This involved passing down and around either a TargetMachine or
TargetRegisterInfo. Update all callers/definitions around the targets
and SelectionDAG.
llvm-svn: 230699
The __finally emission block tries to be clever by removing unused continuation
edges if there's an unconditional jump out of the __finally block. With
exception edges, the EH continuation edge isn't always unused though and we'd
crash in a few places.
Just don't be clever. That makes the IR for __finally blocks a bit longer in
some cases (hence small and behavior-preserving changes to existing tests), but
it makes no difference in general and it fixes the last crash from PR22553.
http://reviews.llvm.org/D7918
llvm-svn: 230697
blend as legal.
We made the same mistake in two different places. Whenever we are custom
lowering a v32i8 blend we need to check whether we are custom lowering
it only for constant conditions that can be shuffled, or whether we
actually have AVX2 and full dynamic blending support on bytes. Both are
fixed, with comments added to make it clear what is going on and a new
test case.
llvm-svn: 230695
Summary:
http://llvm.org/bugs/show_bug.cgi?id=20400
The default triple of i686-pc-linux-gnu for 32 bit linux targets is compatible
but not necessarily identical to the inferior binaries.
Applying Azat Khuzhin's solution of using ArchSpec::IsCompatibleMatch() instead
of ArchSpec::IsExactMatch() when comparing ObjectFile and Modules architecture.
Reviewers: vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7897
llvm-svn: 230694
Summary:
There was no guarantee that the three threads haven't already exited by the
time the watchpoint is set.
Reviewers: ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7916
llvm-svn: 230691
dynamic blends.
This makes it much more clear what is going on. The case we're handling
is that of dynamic conditions, and we're bailing when the nature of the
vector types and subtarget preclude lowering the dynamic condition
vselect as an actual blend.
No functionality changed here, but this will make a subsequent bug-fix
to this code much more clear.
llvm-svn: 230690
Creating BinaryCoverageReader is a strange and complicated dance where
the constructor sets error codes that member functions will later
read, and the object is in an invalid state if readHeader isn't
immediately called after construction.
Instead, make the constructor private and add a static create method
to do the construction properly. This also has the benefit of removing
readHeader completely and simplifying the interface of the object.
llvm-svn: 230676
It is not sound to mark the increment operation as `nuw` or `nsw`
based on a proof off of the add recurrence if the increment operation
we emit happens to be a `sub` instruction.
I could not come up with a test case for this -- the cases where
SCEVExpander decides to emit a `sub` instruction is quite small, and I
cannot think of a way I'd be able to get SCEV to prove that the
increment does not overflow in those cases.
Differential Revision: http://reviews.llvm.org/D7899
llvm-svn: 230673
Summary:
They'll be set anyway when the thread starts running, so the launching threads
should just ignore the set request.
Reviewers: ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7914
llvm-svn: 230671
On 32bits x86 Darwin, the register mappings for the eh_frane and
debug_frame sections are different. Thus the same CFI instructions
should result in different registers in the object file. The
problem isn't target specific though, but it requires that the
mappings for EH register numbers be different from the standard
Dwarf one.
The patch looks a bit clumsy. LLVM uses the EH mapping as
canonical for everything frame related. Thus we need to do a
double conversion EH -> LLVM -> Non-EH, when emitting the
debug_frame section.
Fixes PR22363.
Differential Revision: http://reviews.llvm.org/D7593
llvm-svn: 230670
MSVC doesn't warn on this. Users are expected to apply the WINAPI macro
to functions passed by pointer to the Win32 API, and this macro expands
to __stdcall. This means we end up with a lot of useless noisy warnings
about ignored calling conventions when compiling code with clang for
Win64.
llvm-svn: 230668
InstCombine has long had logic to convert aligned Altivec load/store intrinsics
into regular loads and stores. This mirrors that functionality for QPX vector
load/store intrinsics.
llvm-svn: 230660
have the debugger step through each one individually. Turn off the
combine for adjacent stores at -O0 so we get this behavior.
Possibly, DAGCombine shouldn't run at all at -O0, but that's for
another day; see PR22346.
Differential Revision: http://reviews.llvm.org/D7181
llvm-svn: 230659
There was a problem when passing structures as variable arguments.
The structures smaller than 64 bit were not left justified on MIPS64
big endian. This is now fixed by shifting the value to make it left-
justified when appropriate.
This fixes the bug http://llvm.org/bugs/show_bug.cgi?id=21608
Patch by Aleksandar Beserminji.
Differential Revision: http://reviews.llvm.org/D7881
llvm-svn: 230657
The gold plugin never calls MaterializeModule, so any old debug info
was not deleted and could cause crashes.
Now that it is being "upgraded", the plugin also has to handle warnings
and create Modules with a nice id (it shows in the warning).
llvm-svn: 230655
Summary:
* Clean CMICmdArgValString::Validate: now it's based on CMIUtilString::SplitConsiderQuotes method:
A bit of introduction:
# Command line is wrapped into CMICmdArgContext.
# CMICmdArgSet is a set of arguments to be parsed. This class contains CMICmdArgContext as a private member.
# MI command is class which is inhereted from CMICmdBase. It contains CMICmdArgSet as a private member.
When command is executed CMICmdBase::ParseArgs() is called. This method adds args for parsing using CMICmdArgSet::Add(). Then CMICmdBase::ParseValidateCmdOptions() is called, which calls CMICmdArgSet::Validate(). Then it gets a number of arguments (using SplitConsiderQuotes().array_length) and for each arguments registered in ParseArgs() tries to validate it using CMICmdArgValBase::Validate(). Every user commands parses this string again (first time it was made in SplitConsiderQuotes) and in case of CMICmdArgValString it was made incorrectly. It searches the first and last quotes (but it should be first and next after first). Besides, it was splitted into 4 cases.
I'm just using SplitConsiderQuotes directly, and I don't split them by hand again.
Actually, I think we should do so in every CMICmdArgVal_XXX::Validate() method.
* Enable MiInterpreterExecTestCase.test_lldbmi_target_create test
* Fix MiExecTestCase.test_lldbmi_exec_arguments_set test
All tests pass on OS X.
Reviewers: abidh, emaste, zturner, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, zturner, emaste, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D7860
llvm-svn: 230654
Currently, the NaN values emitted for MIPS architectures do not cover
non-IEEE754-2008 compliant case. This change fixes the issue.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D7882
llvm-svn: 230653
Summary:
* Add CMIUtilString::Escape/Unescape methods (MI)
* Fix process's output to stdout/stderr (MI):
lldb-mi escapes process's output to show it in the following format:
```
~"..."
```
But previously not all characters were escaped by CMICmnLLDBDebuggerHandleEvents::ConvertPrintfCtrlCodeToString and output of
```
printf("'\n` - it's \\n\x12\"\\\"")
```
looked like:
```
~"'\r\n` - it's \n"\""
```
This patch fixes it by using CMIUtilString::Escape method and now it looks like:
```
~"'\r\n` - it's \\n\x12\"\\\""
```
Reviewers: abidh, emaste, clayborg
Reviewed By: clayborg
Subscribers: zturner, lldb-commits, emaste, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D7858
llvm-svn: 230652
In case of "krait" CPU, asm printer doesn't emit any ".cpu" so the
features bits are not computed. This patch lets the asm printer
emit ".cpu cortex-a9" directive for krait and the hwdiv feature is
enabled through ".arch_extension". In short, krait is treated
as "cortex-a9" with hwdiv. We can not emit ".krait" as CPU since
it is not supported bu GNU GAS yet
llvm-svn: 230651
This patch is in response to r223147 where the avaiable features are
computed based on ".cpu" directive. This will work clean for the standard
variants like cortex-a9. For custom variants which rely on standard cpu names
for assembly, the additional features of a CPU should be propagated. This can be
done via ".arch_extension" as long as the assembler supports it. The
implementation for krait along with unit test will be submitted in next patch.
llvm-svn: 230650
Eric Christopher