Summary:
This resolves a similar problem as D16720 (which handled the case when we single-step onto a
breakpoint), but this one deals with involutary stops: when we stop a thread (e.g. because
another thread has hit a breakpont and we are doing a full stop), we can end up stopping it right
before it executes a breakpoint instruction. In this case, the stop reason will be empty, but we
will still step over the breakpoint when do the next resume, thereby missing a breakpoint hit.
I have observed this happening in TestConcurrentEvents, but I have no idea how to reproduce this
behavior more reliably.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18692
llvm-svn: 265525
Summary: Flag updated in D233237
Reviewers: spyffe, jingham, Eugene.Zelenko
Subscribers: lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D18660
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 265421
Summary: Print environment from triple if it exists.
Reviewers: tfiala, clayborg
Subscribers: lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D18620
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 265420
Summary:
The logic to read modules from memory was added to LoadModuleAtAddress
in the dynamic loader, but not in process gdb remote. This means that when
the remote uses svr4 packets to give library info, libraries only present
on the remote will not be loaded.
This patch therefore involves some code duplication from LoadModuleAtAddress
in the dynamic loader, but removing this would require some amount of code
refactoring.
Reviewers: ADodds, tberghammer, tfiala, deepak2427, ted
Subscribers: tfiala, lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D18531
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 265418
Summary:
There was a bug in linux core file handling, where if there was a running process with the same
process id as the id in the core file, the core file debugging would fail, as we would pull some
pieces of information (ProcessInfo structure) from the running process instead of the core file.
I fix this by routing the ProcessInfo requests through the Process class and overriding it in
ProcessElfCore to return correct data.
A (slightly convoluted) test is included.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18697
llvm-svn: 265391
in thumb mode into one method in ArchSpec, replace checks for
specific cores in the disassembler with calls to this. Also call
this from the arm instruction emulation code.
The determination of whether a given ArchSpec is thumb-only is still
a bit of a hack, but at least the hack is consolidated into a single
place. In my original version of this patch http://reviews.llvm.org/D13578
I was calling into llvm's feature arm feature tables to make this
determination, like
#include "llvm/Support/TargetRegistry.h"
#include "llvm/MC/MCSubtargetInfo.h"
#include "llvm/../../lib/Target/ARM/ARMGenRegisterInfo.inc"
#include "llvm/../../lib/Target/ARM/ARMFeatures.h"
[...]
std::string triple (GetTriple().getTriple());
const char *cpu = "";
const char *features_str = "";
const llvm::Target *curr_target = llvm::TargetRegistry::lookupTarget(triple.c_str(), Error);
std::unique_ptr<llvm::MCSubtargetInfo> subtarget_info_up (curr_target->createMCSubtargetInfo(triple.c_str(), cpu, features_str));
if (subtarget_info_up->getFeatureBits()[llvm::ARM::FeatureNoARM])
{
return true;
}
but those tables are post-llvm-build generated and linking against them
for all of our different build system methods was a big hiccup that I
haven't had time to revisit convincingly.
I'll keep that reviews.llvm.org patch around to remind myself that I
need to take another run at linking against the necessary tables
again in llvm.
<rdar://problem/23022803>
llvm-svn: 265377
Teach LLDB that different shells have different characters they are sensitive to, and use that knowledge to do shell-aware escaping
This helps solve a class of problems on OS X where LLDB would try to launch via sh, and run into problems if the command line being passed to the inferior contained such special markers (hint: the shell would error out and we'd fail to launch)
This makes those launch scenarios work transparently via shell expansion
Slightly improve the error message when this kind of failure occurs to at least suggest that the user try going through 'process launch' directly
Fixes rdar://problem/22749408
llvm-svn: 265357
Summary:
Even though FileSpec attempted to handle both kinds of path syntaxes (posix and windows) on both
platforms, it relied on the llvm path library to do its work, whose behavior differed on
different platforms. This led to subtle differences in FileSpec behavior between platforms. This
replaces the pieces of the llvm library with our own implementations. The functions are simply
copied from llvm, with #ifdefs replaced by runtime checks for ePathSyntaxWindows.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18689
llvm-svn: 265299
In doing so, two bugs were uncovered (and fixed). The first bug
is that ClangASTContext::RemoveFastQualifiers() was broken, and
was not removing fast qualifiers (or doing anything else for that
matter). The second bug is that UnifyAccessSpecifiers treated
AS_None asymmetrically, which is probably an edge case, but seems
like a bug nonetheless.
llvm-svn: 265200
TypeSP SymbolFileDWARF::FindDefinitionTypeForDWARFDeclContext (const DWARFDeclContext &dwarf_decl_ctx);
The problem was we might be looking for a type "Foo", and find one from another langauge. Then the DWARFASTParserClang would try to make an AST type using a CompilerType that might return an empty.
This fix makes sure that when we create a DWARFDeclContext from a DWARFDIE that the DWARFDeclContext we set the language of the DIE. Then when we go to find matches for DWARFDeclContext, we end up with bunch of DIEs. We check each DWARFDIE that we found by asking it for its language and making sure the language is compatible with the type system that we want to use. This keeps us from using the wrong types to resolve forward declarations.
<rdar://problem/25276165>
llvm-svn: 265196
rnb_err_t
RNBRemote::HandlePacket_stop_process (const char *p)
{
if (!DNBProcessInterrupt(m_ctx.ProcessID()))
HandlePacket_last_signal (NULL);
return rnb_success;
}
In the call to DNBProcessInterrupt we did:
nub_bool_t
DNBProcessInterrupt(nub_process_t pid)
{
MachProcessSP procSP;
if (GetProcessSP (pid, procSP))
return procSP->Interrupt();
return false;
}
This would always return false. It would cause HandlePacket_stop_process to always call "HandlePacket_last_signal (NULL);" which would send an extra stop reply packet _if_ the process is stopped. On a machine with enough cores, it would call DNBProcessInterrupt(...) and then HandlePacket_last_signal(NULL) so quickly that it will never send out an extra stop reply packet. But if the machine is slow enough or doesn't have enough cores, it could cause the call to HandlePacket_last_signal() to actually succeed and send an extra stop reply packet. This would cause problems up in GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse() where it would get the first stop reply packet and then possibly return or execute an async packet. If it returned, then the next packet that was sent will get the second stop reply as its response. If it executes an async packet, the async packet will get the wrong response.
To fix this I did the following:
1 - in debugserver, I fixed "bool MachProcess::Interrupt()" to return true if it sends the signal so we avoid sending the stop reply twice on slower machines
2 - Added a log line to RNBRemote::HandlePacket_stop_process() to say if we ever send an extra stop reply so we will see this in the darwin console output if this does happen
3 - Added response validators to StringExtractorGDBRemote so that we can verify some responses to some packets.
4 - Added validators to packets that often follow stop reply packets like the "m" packet for memory reads, JSON packets since "jThreadsInfo" is often sent immediately following a stop reply.
5 - Modified GDBRemoteCommunicationClient::SendPacketAndWaitForResponseNoLock() to validate responses. Any "StringExtractorGDBRemote &response" that contains a valid response verifier will verify the response and keep looking for correct responses up to 3 times. This will help us get back on track if we do get extra stop replies. If a StringExtractorGDBRemote does not have a response validator, it will accept any packet in response.
6 - In GDBRemoteCommunicationClient::SendPacketAndWaitForResponse we copy the response validator from the "response" argument over into m_async_response so that if we send the packet by interrupting the running process, we can validate the response we actually get in GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse()
7 - Modified GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse() to always check for an extra stop reply packet for 100ms when the process is interrupted. We were already doing this because we might interrupt a process with a \x03 packet, yet the process was in the process of stopping due to another reason. This race condition could cause an extra stop reply packet because the GDB remote protocol says if a \x03 packet is sent while the process is stopped, we should send a stop reply packet back. Now we always check for an extra stop reply packet when we manually interrupt a process.
The issue was showing up when our IDE would attempt to set a breakpoint while the process is running and this would happen:
--> \x03
<-- $T<stop reply 1>
--> z0,AAAAA,BB (set breakpoint)
<-- $T<stop reply 1> (incorrect extra stop reply packet)
--> c
<-- OK (response from z0 packet)
Now all packet traffic was off by one response. Since we now have a validator on the response for "z" packets, we do this:
--> \x03
<-- $T<stop reply 1>
--> z0,AAAAA,BB (set breakpoint)
<-- $T<stop reply 1> (Ignore this because this can't be the response to z0 packets)
<-- OK -- (we are back on track as this is a valid response to z0)
...
As time goes on we should add more packet validators.
<rdar://problem/22859505>
llvm-svn: 265086
Summary:
In case of Dwo, DIERef stores a compile unit offset in the main object file, and not in the dwo.
The implementation of SymbolFileDWARFDwo::GetDIE inherited from SymbolFileDWARF tried to lookup
the compilation unit in the DWO based on the main object file offset (and failed). I change the
implementation to verify the DIERef indeed references compile unit belonging to this dwo and then
lookup the die based on the die offset alone.
Includes a couple of fixes for mismatched struct/class tags.
Reviewers: tberghammer, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18646
llvm-svn: 265011
1 - DWARF in .o files with debug map in executable: we would place the compile unit index in the upper 32 bits of the 64 bit value and the lower 32 bits would be the DIE offset
2 - DWO: we would place the compile unit offset in the upper 32 bits of the 64 bit value and the lower 32 bits would be the DIE offset
There was a mixing and matching of this and it wasn't done consistently.
Major changes include:
The DIERef constructor that takes a lldb::user_id_t now requires a SymbolFileDWARF:
DIERef(lldb::user_id_t uid, SymbolFileDWARF *dwarf)
It is needed so that it can be decoded correctly. If it is DWARF in .o files with debug map in executable, then we get the right compile unit from the SymbolFileDWARFDebugMap, otherwise, we use the compile unit offset and DIE offset for DWO or normal DWARF.
The function:
lldb::user_id_t DIERef::GetUID() const;
Now becomes
lldb::user_id_t DIERef::GetUID(SymbolFileDWARF *dwarf) const;
Again, we need the DWARF file to encode it correctly.
This removes the need for "lldb::user_id_t SymbolFileDWARF::MakeUserID() const" and for bool SymbolFileDWARF::UserIDMatches (lldb::user_id_t uid) const". There were also many places were doing things inneficiently like:
1 - encode a dw_offset_t into a lldb::user_id_t
2 - call the public SymbolFile interface to resolve types using the lldb::user_id_t
3 - This would then decode the lldb::user_id_t into a DIERef, and then try to find that type.
There are many places that are now doing this more efficiently by storing DW_AT_type form values as DWARFFormValue objects and then making a DIERef from them and directly calling the underlying function to resolve the lldb_private::Type, lldb_private::CompilerType, lldb_private::CompilerDecl, lldb_private::CompilerDeclContext.
If there are any regressions in DWARF with DWO, we will need to fix any issues that arise since the original patch wasn't functional for the much more widely used DWARF in .o files with debug map.
<rdar://problem/25200976>
llvm-svn: 264909
They're not supposed to go in the symbol table, and in fact the way the JIT
is currently implemented it sometimes crashes when you try to get the
address of such a function. So we skip them.
llvm-svn: 264821
The problem was that the static DynamicLoaderDarwinKernel::Initialize() was recently changed to come before DynamicLoaderMacOSXDYLD::Initialize() which caused the DynamicLoaderDarwinKernel::CreateInstance(...) to be called before DynamicLoaderMacOSXDYLD::CreateInstance(...) and DynamicLoaderDarwinKernel would claim it could be the dynamic loader for a user space MacOSX process. The fix is to make DynamicLoaderDarwinKernel::CreateInstance() a bit more thourough when vetting the process so that it doesn't claim MacOSX user space processes.
<rdar://problem/25425373>
llvm-svn: 264794
quietly apply fixits for those who really trust clang's fixits.
Also, moved the retry into ClangUserExpression::Evaluate, where I can make a whole new ClangUserExpression
to do the work. Reusing any of the parts of a UserExpression in situ isn't supported at present.
<rdar://problem/25351938>
llvm-svn: 264793
Summary: These are not needed by lldb-server. Removing them shrinks the server by about 0.5%.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18206
llvm-svn: 264735
Summary:
Since r264316, clang started adding DW_AT_GNU_dwo_name attribute to dwo files (previously, this
attribute was only present in main object files), breaking pretty much every dwo test. The
problem was that we were treating the presence of said attribute as a signal that we should look
for information in an external object file, and caused us to enter an infinite loop. I fix this
by making sure we do not go looking for an external dwo file if we already *are* parsing a dwo
file.
Reviewers: tberghammer, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18547
llvm-svn: 264729
This allows these functions to be re-used by a forthcoming
PDBASTParser. The functions in question are CanCompleteType,
CompleteType, and CanImport. Conceptually, these functions belong
on ClangASTImporter anyway, and previously they were just ping
ponging around through a few levels of indirection to end up there
as well, so this patch actually makes the code somewhat simpler.
A few methods were moved to a new file called ClangUtil, so that
they can be shared between ClangASTImporter and ClangASTContext
without creating a circular dependency between those two cpp
files.
Differential Revision: http://reviews.llvm.org/D18381
llvm-svn: 264685
Top-level Clang expressions are expressions that act as new translation units,
and define their own symbols. They do not have function wrappers like regular
expressions do, and declarations are persistent regardless of use of the dollar
sign in identifiers. Names defined by these are given priority over all other
symbol lookups.
This patch adds a new expression option, '-p' or '--top-level,' which controls
whether the expression is treated this way. It also adds a flag controlling
this to SBExpressionOptions so that this API is usable externally. It also adds
a test that validates that this works. (The test requires a fix to the Clang
AST importer which I will be committing shortly.)
<rdar://problem/22864976>
llvm-svn: 264662
The ASTImporter completes the full definiton for a TagDecl in several places,
including the type-deport logic. When this happens, we should also propagate
the bit that says that this is a complete definition. This makes (for example)
lambdas callable.
<rdar://problem/22864976>
llvm-svn: 264485
Blocks and lambdas have their implementation functions stored in the IR for an
expression. If we put the block/lambda into a result variable it needs to stay
around. As a heuristic, remember any execution unit that has more than one
function in it.
<rdar://problem/22864976>
llvm-svn: 264483
Summary:
This fixes a leak introduced by some of these changes:
r257644
r250530
r250525
The changes made in these patches result in leaking the FILE* passed
to SetImmediateOutputFile. GetStream() will dup() the fd held by the
python caller and create a new FILE*. It will then pass this FILE*
to SetImmediateOutputFile, which always uses the flag
transfer_ownership=false when it creates a File from the FILE*.
Since transfer_ownership is false, the lldb File destructor will not
close the underlying FILE*. Because this FILE* came from a dup-ed fd,
it will also not be closed when the python caller closes its file.
Leaking the FILE* causes issues if the same file is used multiple times
by different python callers during the same lldb run, even if these
callers open and close the python file properly, as you can end up
with issues due to multiple buffered writes to the same file.
Reviewers: granata.enrico, zturner, clayborg
Subscribers: zturner, lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D18459
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 264476
months back to PlatformRemoteAppleTV and PlatformRemoteAppleWatch
to help understand what's happening when lldb can't find binaries
that it should be finding.
llvm-svn: 264380
This feature is controlled by an expression command option, a target property and the
SBExpressionOptions setting. FixIt's are only applied to UserExpressions, not UtilityFunctions,
those you have to get right when you make them.
This is just a first stage. At present the fixits are applied silently. The next step
is to tell the user about the applied fixit.
<rdar://problem/25351938>
llvm-svn: 264379