replica
/
hanchenye-llvm-project
2
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
hanchenye-llvm-project/llvm/test/CodeGen/Mips/mips16ex.ll

92 lines
3.3 KiB
LLVM
Raw Normal View History

[mips][mips16] MIPS16 is not a CPU/Architecture but is an ASE. Summary: The -mcpu=mips16 option caused the Integrated Assembler to crash because it couldn't figure out the architecture revision number to write to the .MIPS.abiflags section. This CPU definition has been removed because, like microMIPS, MIPS16 is an ASE to a base architecture. Reviewers: vkalintiris Subscribers: rkotler, llvm-commits, dsanders Differential Revision: http://reviews.llvm.org/D13656 llvm-svn: 250407
2015-10-15 22:34:23 +08:00
; RUN: llc -march=mipsel -mattr=mips16 -relocation-model=pic -O3 < %s | FileCheck %s -check-prefix=16
This patch is needed to make c++ exceptions work for mips16. Mips16 is really a processor decoding mode (ala thumb 1) and in the same program, mips16 and mips32 functions can exist and can call each other. If a jal type instruction encounters an address with the lower bit set, then the processor switches to mips16 mode (if it is not already in it). If the lower bit is not set, then it switches to mips32 mode. The linker knows which functions are mips16 and which are mips32. When relocation is performed on code labels, this lower order bit is set if the code label is a mips16 code label. In general this works just fine, however when creating exception handling tables and dwarf, there are cases where you don't want this lower order bit added in. This has been traditionally distinguished in gas assembly source by using a different syntax for the label. lab1: ; this will cause the lower order bit to be added lab2=. ; this will not cause the lower order bit to be added In some cases, it does not matter because in dwarf and debug tables the difference of two labels is used and in that case the lower order bits subtract each other out. To fix this, I have added to mcstreamer the notion of a debuglabel. The default is for label and debug label to be the same. So calling EmitLabel and EmitDebugLabel produce the same result. For various reasons, there is only one set of labels that needs to be modified for the mips exceptions to work. These are the "$eh_func_beginXXX" labels. Mips overrides the debug label suffix from ":" to "=." . This initial patch fixes exceptions. More changes most likely will be needed to DwarfCFException to make all of this work for actual debugging. These changes will be to emit debug labels in some places where a simple label is emitted now. Some historical discussion on this from gcc can be found at: http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html llvm-svn: 170279
2012-12-16 12:00:45 +08:00
Centralize handling of the eh_begin and eh_end labels. This removes a bit of duplicated code and more importantly, remembers the labels so that they don't need to be looked up by name. This in turn allows for any name to be used and avoids a crash if the name we wanted was already taken. llvm-svn: 230772
2015-02-28 02:18:39 +08:00
;16: main:
Print a=b as an assignment. In assembly the expression a=b is parsed as an assignment, so it should be printed as one. This remove a truly horrible hack for producing a label with "a=.". It would be used by codegen but would never be reached by the asm parser. Sorry I missed this when it was first committed. llvm-svn: 211639
2014-06-25 06:45:16 +08:00
;16-NEXT: [[TMP:.*]]:
Drop the "eh_" from eh_func_begin and eh_func_end. They will be used for more than eh tables. llvm-svn: 231185
2015-03-04 08:27:43 +08:00
;16-NEXT: $func_begin0 = ([[TMP]])
Centralize handling of the eh_begin and eh_end labels. This removes a bit of duplicated code and more importantly, remembers the labels so that they don't need to be looked up by name. This in turn allows for any name to be used and avoids a crash if the name we wanted was already taken. llvm-svn: 230772
2015-02-28 02:18:39 +08:00
;16-NEXT: .cfi_startproc
;16-NEXT: .cfi_personality
This patch is needed to make c++ exceptions work for mips16. Mips16 is really a processor decoding mode (ala thumb 1) and in the same program, mips16 and mips32 functions can exist and can call each other. If a jal type instruction encounters an address with the lower bit set, then the processor switches to mips16 mode (if it is not already in it). If the lower bit is not set, then it switches to mips32 mode. The linker knows which functions are mips16 and which are mips32. When relocation is performed on code labels, this lower order bit is set if the code label is a mips16 code label. In general this works just fine, however when creating exception handling tables and dwarf, there are cases where you don't want this lower order bit added in. This has been traditionally distinguished in gas assembly source by using a different syntax for the label. lab1: ; this will cause the lower order bit to be added lab2=. ; this will not cause the lower order bit to be added In some cases, it does not matter because in dwarf and debug tables the difference of two labels is used and in that case the lower order bits subtract each other out. To fix this, I have added to mcstreamer the notion of a debuglabel. The default is for label and debug label to be the same. So calling EmitLabel and EmitDebugLabel produce the same result. For various reasons, there is only one set of labels that needs to be modified for the mips exceptions to work. These are the "$eh_func_beginXXX" labels. Mips overrides the debug label suffix from ":" to "=." . This initial patch fixes exceptions. More changes most likely will be needed to DwarfCFException to make all of this work for actual debugging. These changes will be to emit debug labels in some places where a simple label is emitted now. Some historical discussion on this from gcc can be found at: http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html llvm-svn: 170279
2012-12-16 12:00:45 +08:00
@.str = private unnamed_addr constant [7 x i8] c"hello\0A\00", align 1
@_ZTIi = external constant i8*
@.str1 = private unnamed_addr constant [15 x i8] c"exception %i \0A\00", align 1
Move the personality function from LandingPadInst to Function The personality routine currently lives in the LandingPadInst. This isn't desirable because: - All LandingPadInsts in the same function must have the same personality routine. This means that each LandingPadInst beyond the first has an operand which produces no additional information. - There is ongoing work to introduce EH IR constructs other than LandingPadInst. Moving the personality routine off of any one particular Instruction and onto the parent function seems a lot better than have N different places a personality function can sneak onto an exceptional function. Differential Revision: http://reviews.llvm.org/D10429 llvm-svn: 239940
2015-06-18 04:52:32 +08:00
define i32 @main() personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
This patch is needed to make c++ exceptions work for mips16. Mips16 is really a processor decoding mode (ala thumb 1) and in the same program, mips16 and mips32 functions can exist and can call each other. If a jal type instruction encounters an address with the lower bit set, then the processor switches to mips16 mode (if it is not already in it). If the lower bit is not set, then it switches to mips32 mode. The linker knows which functions are mips16 and which are mips32. When relocation is performed on code labels, this lower order bit is set if the code label is a mips16 code label. In general this works just fine, however when creating exception handling tables and dwarf, there are cases where you don't want this lower order bit added in. This has been traditionally distinguished in gas assembly source by using a different syntax for the label. lab1: ; this will cause the lower order bit to be added lab2=. ; this will not cause the lower order bit to be added In some cases, it does not matter because in dwarf and debug tables the difference of two labels is used and in that case the lower order bits subtract each other out. To fix this, I have added to mcstreamer the notion of a debuglabel. The default is for label and debug label to be the same. So calling EmitLabel and EmitDebugLabel produce the same result. For various reasons, there is only one set of labels that needs to be modified for the mips exceptions to work. These are the "$eh_func_beginXXX" labels. Mips overrides the debug label suffix from ":" to "=." . This initial patch fixes exceptions. More changes most likely will be needed to DwarfCFException to make all of this work for actual debugging. These changes will be to emit debug labels in some places where a simple label is emitted now. Some historical discussion on this from gcc can be found at: http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html llvm-svn: 170279
2012-12-16 12:00:45 +08:00
entry:
%retval = alloca i32, align 4
%exn.slot = alloca i8*
%ehselector.slot = alloca i32
%e = alloca i32, align 4
store i32 0, i32* %retval
[opaque pointer type] Add textual IR support for explicit type parameter to the call instruction See r230786 and r230794 for similar changes to gep and load respectively. Call is a bit different because it often doesn't have a single explicit type - usually the type is deduced from the arguments, and just the return type is explicit. In those cases there's no need to change the IR. When that's not the case, the IR usually contains the pointer type of the first operand - but since typed pointers are going away, that representation is insufficient so I'm just stripping the "pointerness" of the explicit type away. This does make the IR a bit weird - it /sort of/ reads like the type of the first operand: "call void () %x(" but %x is actually of type "void ()*" and will eventually be just of type "ptr". But this seems not too bad and I don't think it would benefit from repeating the type ("void (), void () * %x(" and then eventually "void (), ptr %x(") as has been done with gep and load. This also has a side benefit: since the explicit type is no longer a pointer, there's no ambiguity between an explicit type and a function that returns a function pointer. Previously this case needed an explicit type (eg: a function returning a void() function was written as "call void () () * @x(" rather than "call void () * @x(" because of the ambiguity between a function returning a pointer to a void() function and a function returning void). No ambiguity means even function pointer return types can just be written alone, without writing the whole function's type. This leaves /only/ the varargs case where the explicit type is required. Given the special type syntax in call instructions, the regex-fu used for migration was a bit more involved in its own unique way (as every one of these is) so here it is. Use it in conjunction with the apply.sh script and associated find/xargs commands I've provided in rr230786 to migrate your out of tree tests. Do let me know if any of this doesn't cover your cases & we can iterate on a more general script/regexes to help others with out of tree tests. About 9 test cases couldn't be automatically migrated - half of those were functions returning function pointers, where I just had to manually delete the function argument types now that we didn't need an explicit function type there. The other half were typedefs of function types used in calls - just had to manually drop the * from those. import fileinput import sys import re pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)') addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$") func_end = re.compile("(?:void.*|\)\s*)\*$") def conv(match, line): if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)): return line return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():] for line in sys.stdin: sys.stdout.write(conv(re.search(pat, line), line)) llvm-svn: 235145
2015-04-17 07:24:18 +08:00
%call = call i32 (i8*, ...) @printf(i8* getelementptr inbounds ([7 x i8], [7 x i8]* @.str, i32 0, i32 0))
This patch is needed to make c++ exceptions work for mips16. Mips16 is really a processor decoding mode (ala thumb 1) and in the same program, mips16 and mips32 functions can exist and can call each other. If a jal type instruction encounters an address with the lower bit set, then the processor switches to mips16 mode (if it is not already in it). If the lower bit is not set, then it switches to mips32 mode. The linker knows which functions are mips16 and which are mips32. When relocation is performed on code labels, this lower order bit is set if the code label is a mips16 code label. In general this works just fine, however when creating exception handling tables and dwarf, there are cases where you don't want this lower order bit added in. This has been traditionally distinguished in gas assembly source by using a different syntax for the label. lab1: ; this will cause the lower order bit to be added lab2=. ; this will not cause the lower order bit to be added In some cases, it does not matter because in dwarf and debug tables the difference of two labels is used and in that case the lower order bits subtract each other out. To fix this, I have added to mcstreamer the notion of a debuglabel. The default is for label and debug label to be the same. So calling EmitLabel and EmitDebugLabel produce the same result. For various reasons, there is only one set of labels that needs to be modified for the mips exceptions to work. These are the "$eh_func_beginXXX" labels. Mips overrides the debug label suffix from ":" to "=." . This initial patch fixes exceptions. More changes most likely will be needed to DwarfCFException to make all of this work for actual debugging. These changes will be to emit debug labels in some places where a simple label is emitted now. Some historical discussion on this from gcc can be found at: http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html llvm-svn: 170279
2012-12-16 12:00:45 +08:00
%exception = call i8* @__cxa_allocate_exception(i32 4) nounwind
%0 = bitcast i8* %exception to i32*
store i32 20, i32* %0
invoke void @__cxa_throw(i8* %exception, i8* bitcast (i8** @_ZTIi to i8*), i8* null) noreturn
to label %unreachable unwind label %lpad
lpad: ; preds = %entry
Move the personality function from LandingPadInst to Function The personality routine currently lives in the LandingPadInst. This isn't desirable because: - All LandingPadInsts in the same function must have the same personality routine. This means that each LandingPadInst beyond the first has an operand which produces no additional information. - There is ongoing work to introduce EH IR constructs other than LandingPadInst. Moving the personality routine off of any one particular Instruction and onto the parent function seems a lot better than have N different places a personality function can sneak onto an exceptional function. Differential Revision: http://reviews.llvm.org/D10429 llvm-svn: 239940
2015-06-18 04:52:32 +08:00
%1 = landingpad { i8*, i32 }
This patch is needed to make c++ exceptions work for mips16. Mips16 is really a processor decoding mode (ala thumb 1) and in the same program, mips16 and mips32 functions can exist and can call each other. If a jal type instruction encounters an address with the lower bit set, then the processor switches to mips16 mode (if it is not already in it). If the lower bit is not set, then it switches to mips32 mode. The linker knows which functions are mips16 and which are mips32. When relocation is performed on code labels, this lower order bit is set if the code label is a mips16 code label. In general this works just fine, however when creating exception handling tables and dwarf, there are cases where you don't want this lower order bit added in. This has been traditionally distinguished in gas assembly source by using a different syntax for the label. lab1: ; this will cause the lower order bit to be added lab2=. ; this will not cause the lower order bit to be added In some cases, it does not matter because in dwarf and debug tables the difference of two labels is used and in that case the lower order bits subtract each other out. To fix this, I have added to mcstreamer the notion of a debuglabel. The default is for label and debug label to be the same. So calling EmitLabel and EmitDebugLabel produce the same result. For various reasons, there is only one set of labels that needs to be modified for the mips exceptions to work. These are the "$eh_func_beginXXX" labels. Mips overrides the debug label suffix from ":" to "=." . This initial patch fixes exceptions. More changes most likely will be needed to DwarfCFException to make all of this work for actual debugging. These changes will be to emit debug labels in some places where a simple label is emitted now. Some historical discussion on this from gcc can be found at: http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html llvm-svn: 170279
2012-12-16 12:00:45 +08:00
catch i8* bitcast (i8** @_ZTIi to i8*)
%2 = extractvalue { i8*, i32 } %1, 0
store i8* %2, i8** %exn.slot
%3 = extractvalue { i8*, i32 } %1, 1
store i32 %3, i32* %ehselector.slot
br label %catch.dispatch
catch.dispatch: ; preds = %lpad
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%sel = load i32, i32* %ehselector.slot
This patch is needed to make c++ exceptions work for mips16. Mips16 is really a processor decoding mode (ala thumb 1) and in the same program, mips16 and mips32 functions can exist and can call each other. If a jal type instruction encounters an address with the lower bit set, then the processor switches to mips16 mode (if it is not already in it). If the lower bit is not set, then it switches to mips32 mode. The linker knows which functions are mips16 and which are mips32. When relocation is performed on code labels, this lower order bit is set if the code label is a mips16 code label. In general this works just fine, however when creating exception handling tables and dwarf, there are cases where you don't want this lower order bit added in. This has been traditionally distinguished in gas assembly source by using a different syntax for the label. lab1: ; this will cause the lower order bit to be added lab2=. ; this will not cause the lower order bit to be added In some cases, it does not matter because in dwarf and debug tables the difference of two labels is used and in that case the lower order bits subtract each other out. To fix this, I have added to mcstreamer the notion of a debuglabel. The default is for label and debug label to be the same. So calling EmitLabel and EmitDebugLabel produce the same result. For various reasons, there is only one set of labels that needs to be modified for the mips exceptions to work. These are the "$eh_func_beginXXX" labels. Mips overrides the debug label suffix from ":" to "=." . This initial patch fixes exceptions. More changes most likely will be needed to DwarfCFException to make all of this work for actual debugging. These changes will be to emit debug labels in some places where a simple label is emitted now. Some historical discussion on this from gcc can be found at: http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html llvm-svn: 170279
2012-12-16 12:00:45 +08:00
%4 = call i32 @llvm.eh.typeid.for(i8* bitcast (i8** @_ZTIi to i8*)) nounwind
%matches = icmp eq i32 %sel, %4
br i1 %matches, label %catch, label %eh.resume
catch: ; preds = %catch.dispatch
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%exn = load i8*, i8** %exn.slot
This patch is needed to make c++ exceptions work for mips16. Mips16 is really a processor decoding mode (ala thumb 1) and in the same program, mips16 and mips32 functions can exist and can call each other. If a jal type instruction encounters an address with the lower bit set, then the processor switches to mips16 mode (if it is not already in it). If the lower bit is not set, then it switches to mips32 mode. The linker knows which functions are mips16 and which are mips32. When relocation is performed on code labels, this lower order bit is set if the code label is a mips16 code label. In general this works just fine, however when creating exception handling tables and dwarf, there are cases where you don't want this lower order bit added in. This has been traditionally distinguished in gas assembly source by using a different syntax for the label. lab1: ; this will cause the lower order bit to be added lab2=. ; this will not cause the lower order bit to be added In some cases, it does not matter because in dwarf and debug tables the difference of two labels is used and in that case the lower order bits subtract each other out. To fix this, I have added to mcstreamer the notion of a debuglabel. The default is for label and debug label to be the same. So calling EmitLabel and EmitDebugLabel produce the same result. For various reasons, there is only one set of labels that needs to be modified for the mips exceptions to work. These are the "$eh_func_beginXXX" labels. Mips overrides the debug label suffix from ":" to "=." . This initial patch fixes exceptions. More changes most likely will be needed to DwarfCFException to make all of this work for actual debugging. These changes will be to emit debug labels in some places where a simple label is emitted now. Some historical discussion on this from gcc can be found at: http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html llvm-svn: 170279
2012-12-16 12:00:45 +08:00
%5 = call i8* @__cxa_begin_catch(i8* %exn) nounwind
%6 = bitcast i8* %5 to i32*
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%exn.scalar = load i32, i32* %6
This patch is needed to make c++ exceptions work for mips16. Mips16 is really a processor decoding mode (ala thumb 1) and in the same program, mips16 and mips32 functions can exist and can call each other. If a jal type instruction encounters an address with the lower bit set, then the processor switches to mips16 mode (if it is not already in it). If the lower bit is not set, then it switches to mips32 mode. The linker knows which functions are mips16 and which are mips32. When relocation is performed on code labels, this lower order bit is set if the code label is a mips16 code label. In general this works just fine, however when creating exception handling tables and dwarf, there are cases where you don't want this lower order bit added in. This has been traditionally distinguished in gas assembly source by using a different syntax for the label. lab1: ; this will cause the lower order bit to be added lab2=. ; this will not cause the lower order bit to be added In some cases, it does not matter because in dwarf and debug tables the difference of two labels is used and in that case the lower order bits subtract each other out. To fix this, I have added to mcstreamer the notion of a debuglabel. The default is for label and debug label to be the same. So calling EmitLabel and EmitDebugLabel produce the same result. For various reasons, there is only one set of labels that needs to be modified for the mips exceptions to work. These are the "$eh_func_beginXXX" labels. Mips overrides the debug label suffix from ":" to "=." . This initial patch fixes exceptions. More changes most likely will be needed to DwarfCFException to make all of this work for actual debugging. These changes will be to emit debug labels in some places where a simple label is emitted now. Some historical discussion on this from gcc can be found at: http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html llvm-svn: 170279
2012-12-16 12:00:45 +08:00
store i32 %exn.scalar, i32* %e, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%7 = load i32, i32* %e, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to the invoke instruction Same as r235145 for the call instruction - the justification, tradeoffs, etc are all the same. The conversion script worked the same without any false negatives (after replacing 'call' with 'invoke'). llvm-svn: 235755
2015-04-25 03:32:54 +08:00
%call2 = invoke i32 (i8*, ...) @printf(i8* getelementptr inbounds ([15 x i8], [15 x i8]* @.str1, i32 0, i32 0), i32 %7)
This patch is needed to make c++ exceptions work for mips16. Mips16 is really a processor decoding mode (ala thumb 1) and in the same program, mips16 and mips32 functions can exist and can call each other. If a jal type instruction encounters an address with the lower bit set, then the processor switches to mips16 mode (if it is not already in it). If the lower bit is not set, then it switches to mips32 mode. The linker knows which functions are mips16 and which are mips32. When relocation is performed on code labels, this lower order bit is set if the code label is a mips16 code label. In general this works just fine, however when creating exception handling tables and dwarf, there are cases where you don't want this lower order bit added in. This has been traditionally distinguished in gas assembly source by using a different syntax for the label. lab1: ; this will cause the lower order bit to be added lab2=. ; this will not cause the lower order bit to be added In some cases, it does not matter because in dwarf and debug tables the difference of two labels is used and in that case the lower order bits subtract each other out. To fix this, I have added to mcstreamer the notion of a debuglabel. The default is for label and debug label to be the same. So calling EmitLabel and EmitDebugLabel produce the same result. For various reasons, there is only one set of labels that needs to be modified for the mips exceptions to work. These are the "$eh_func_beginXXX" labels. Mips overrides the debug label suffix from ":" to "=." . This initial patch fixes exceptions. More changes most likely will be needed to DwarfCFException to make all of this work for actual debugging. These changes will be to emit debug labels in some places where a simple label is emitted now. Some historical discussion on this from gcc can be found at: http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html llvm-svn: 170279
2012-12-16 12:00:45 +08:00
to label %invoke.cont unwind label %lpad1
invoke.cont: ; preds = %catch
call void @__cxa_end_catch() nounwind
br label %try.cont
try.cont: ; preds = %invoke.cont
ret i32 0
lpad1: ; preds = %catch
Move the personality function from LandingPadInst to Function The personality routine currently lives in the LandingPadInst. This isn't desirable because: - All LandingPadInsts in the same function must have the same personality routine. This means that each LandingPadInst beyond the first has an operand which produces no additional information. - There is ongoing work to introduce EH IR constructs other than LandingPadInst. Moving the personality routine off of any one particular Instruction and onto the parent function seems a lot better than have N different places a personality function can sneak onto an exceptional function. Differential Revision: http://reviews.llvm.org/D10429 llvm-svn: 239940
2015-06-18 04:52:32 +08:00
%8 = landingpad { i8*, i32 }
This patch is needed to make c++ exceptions work for mips16. Mips16 is really a processor decoding mode (ala thumb 1) and in the same program, mips16 and mips32 functions can exist and can call each other. If a jal type instruction encounters an address with the lower bit set, then the processor switches to mips16 mode (if it is not already in it). If the lower bit is not set, then it switches to mips32 mode. The linker knows which functions are mips16 and which are mips32. When relocation is performed on code labels, this lower order bit is set if the code label is a mips16 code label. In general this works just fine, however when creating exception handling tables and dwarf, there are cases where you don't want this lower order bit added in. This has been traditionally distinguished in gas assembly source by using a different syntax for the label. lab1: ; this will cause the lower order bit to be added lab2=. ; this will not cause the lower order bit to be added In some cases, it does not matter because in dwarf and debug tables the difference of two labels is used and in that case the lower order bits subtract each other out. To fix this, I have added to mcstreamer the notion of a debuglabel. The default is for label and debug label to be the same. So calling EmitLabel and EmitDebugLabel produce the same result. For various reasons, there is only one set of labels that needs to be modified for the mips exceptions to work. These are the "$eh_func_beginXXX" labels. Mips overrides the debug label suffix from ":" to "=." . This initial patch fixes exceptions. More changes most likely will be needed to DwarfCFException to make all of this work for actual debugging. These changes will be to emit debug labels in some places where a simple label is emitted now. Some historical discussion on this from gcc can be found at: http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html llvm-svn: 170279
2012-12-16 12:00:45 +08:00
cleanup
%9 = extractvalue { i8*, i32 } %8, 0
store i8* %9, i8** %exn.slot
%10 = extractvalue { i8*, i32 } %8, 1
store i32 %10, i32* %ehselector.slot
call void @__cxa_end_catch() nounwind
br label %eh.resume
eh.resume: ; preds = %lpad1, %catch.dispatch
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%exn3 = load i8*, i8** %exn.slot
%sel4 = load i32, i32* %ehselector.slot
This patch is needed to make c++ exceptions work for mips16. Mips16 is really a processor decoding mode (ala thumb 1) and in the same program, mips16 and mips32 functions can exist and can call each other. If a jal type instruction encounters an address with the lower bit set, then the processor switches to mips16 mode (if it is not already in it). If the lower bit is not set, then it switches to mips32 mode. The linker knows which functions are mips16 and which are mips32. When relocation is performed on code labels, this lower order bit is set if the code label is a mips16 code label. In general this works just fine, however when creating exception handling tables and dwarf, there are cases where you don't want this lower order bit added in. This has been traditionally distinguished in gas assembly source by using a different syntax for the label. lab1: ; this will cause the lower order bit to be added lab2=. ; this will not cause the lower order bit to be added In some cases, it does not matter because in dwarf and debug tables the difference of two labels is used and in that case the lower order bits subtract each other out. To fix this, I have added to mcstreamer the notion of a debuglabel. The default is for label and debug label to be the same. So calling EmitLabel and EmitDebugLabel produce the same result. For various reasons, there is only one set of labels that needs to be modified for the mips exceptions to work. These are the "$eh_func_beginXXX" labels. Mips overrides the debug label suffix from ":" to "=." . This initial patch fixes exceptions. More changes most likely will be needed to DwarfCFException to make all of this work for actual debugging. These changes will be to emit debug labels in some places where a simple label is emitted now. Some historical discussion on this from gcc can be found at: http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html llvm-svn: 170279
2012-12-16 12:00:45 +08:00
%lpad.val = insertvalue { i8*, i32 } undef, i8* %exn3, 0
%lpad.val5 = insertvalue { i8*, i32 } %lpad.val, i32 %sel4, 1
resume { i8*, i32 } %lpad.val5
unreachable: ; preds = %entry
unreachable
}
declare i32 @printf(i8*, ...)
declare i8* @__cxa_allocate_exception(i32)
declare i32 @__gxx_personality_v0(...)
declare void @__cxa_throw(i8*, i8*, i8*)
declare i32 @llvm.eh.typeid.for(i8*) nounwind readnone
declare i8* @__cxa_begin_catch(i8*)
declare void @__cxa_end_catch()