Merge pull request #1632 from firesim/update-u250-doc
add missing step for flashing local FPGAs
This commit is contained in:
commit
3dbbe8b630
|
@ -198,11 +198,13 @@ Now, let's attach your |fpga_name|_ FPGA(s) to your Run Farm Machines:
|
||||||
|
|
||||||
11. Uncheck "Verify" and click OK.
|
11. Uncheck "Verify" and click OK.
|
||||||
|
|
||||||
12. When programming the configuration memory device is completed, power off your machine fully (i.e., the FPGA should completely lose |dip_switch_extra|
|
12. Right-click on your FPGA and click "Boot from Configuration Memory Device".
|
||||||
|
|
||||||
13. Cold-boot the machine. A cold boot is required for the FPGA to be successfully re-programmed from its flash.
|
13. When programming the configuration memory device is completed, power off your machine fully (i.e., the FPGA should completely lose |dip_switch_extra|)
|
||||||
|
|
||||||
14. Once the machine has booted, run the following to ensure that your FPGA is set up properly:
|
14. Cold-boot the machine. A cold boot is required for the FPGA to be successfully re-programmed from its flash.
|
||||||
|
|
||||||
|
15. Once the machine has booted, run the following to ensure that your FPGA is set up properly:
|
||||||
|
|
||||||
.. code-block:: bash
|
.. code-block:: bash
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue