folkslinux
/
zfs
mirror of https://github.com/openzfs/zfs.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
zfs/tests
History
Brian Behlendorf 8fb1ede146 Extend deadman logic 
The intent of this patch is extend the existing deadman code
such that it's flexible enough to be used by both ztest and
on production systems.  The proposed changes include:

* Added a new `zfs_deadman_failmode` module option which is
  used to dynamically control the behavior of the deadman.  It's
  loosely modeled after, but independant from, the pool failmode
  property.  It can be set to wait, continue, or panic.

    * wait     - Wait for the "hung" I/O (default)
    * continue - Attempt to recover from a "hung" I/O
    * panic    - Panic the system

* Added a new `zfs_deadman_ziotime_ms` module option which is
  analogous to `zfs_deadman_synctime_ms` except instead of
  applying to a pool TXG sync it applies to zio_wait().  A
  default value of 300s is used to define a "hung" zio.

* The ztest deadman thread has been re-enabled by default,
  aligned with the upstream OpenZFS code, and then extended
  to terminate the process when it takes significantly longer
  to complete than expected.

* The -G option was added to ztest to print the internal debug
  log when a fatal error is encountered.  This same option was
  previously added to zdb in commit fa603f82.  Update zloop.sh
  to unconditionally pass -G to obtain additional debugging.

* The FM_EREPORT_ZFS_DELAY event which was previously posted
  when the deadman detect a "hung" pool has been replaced by
  a new dedicated FM_EREPORT_ZFS_DEADMAN event.

* The proposed recovery logic attempts to restart a "hung"
  zio by calling zio_interrupt() on any outstanding leaf zios.
  We may want to further restrict this to zios in either the
  ZIO_STAGE_VDEV_IO_START or ZIO_STAGE_VDEV_IO_DONE stages.
  Calling zio_interrupt() is expected to only be useful for
  cases when an IO has been submitted to the physical device
  but for some reasonable the completion callback hasn't been
  called by the lower layers.  This shouldn't be possible but
  has been observed and may be caused by kernel/driver bugs.

* The 'zfs_deadman_synctime_ms' default value was reduced from
  1000s to 600s.

* Depending on how ztest fails there may be no cache file to
  move.  This should not be considered fatal, collect the logs
  which are available and carry on.

* Add deadman test cases for spa_deadman() and zio_wait().

* Increase default zfs_deadman_checktime_ms to 60s.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6999
 		2018-01-25 13:40:38 -08:00
..
runfiles Extend deadman logic 2018-01-25 13:40:38 -08:00
test-runner Allow test-runner to filter test groups by tag 2017-11-03 09:53:32 -07:00
zfs-tests Extend deadman logic 2018-01-25 13:40:38 -08:00
Makefile.am Add the ZFS Test Suite 2016-03-16 13:46:16 -07:00
README.md ZTS: minor typo and old default values 2017-07-03 14:21:12 -07:00

README.md

ZFS Test Suite README

  1. Building and installing the ZFS Test Suite

The ZFS Test Suite runs under the test-runner framework. This framework is built along side the standard ZFS utilities and is included as part of zfs-test package. The zfs-test package can be built from source as follows:

$ ./configure
$ make pkg-utils

The resulting packages can be installed using the rpm or dpkg command as appropriate for your distributions. Alternately, if you have installed ZFS from a distributions repository (not from source) the zfs-test package may be provided for your distribution.

- Installed from source
$ rpm -ivh ./zfs-test*.rpm, or
$ dpkg -i ./zfs-test*.deb,

- Installed from package repository
$ yum install zfs-test
$ apt-get install zfs-test
  1. Running the ZFS Test Suite

The pre-requisites for running the ZFS Test Suite are:

  • Three scratch disks
    • Specify the disks you wish to use in the $DISKS variable, as a space delimited list like this: DISKS='vdb vdc vdd'. By default the zfs-tests.sh sciprt will construct three loopback devices to be used for testing: DISKS='loop0 loop1 loop2'.
  • A non-root user with a full set of basic privileges and the ability to sudo(8) to root without a password to run the test.
  • Specify any pools you wish to preserve as a space delimited list in the $KEEP variable. All pools detected at the start of testing are added automatically.
  • The ZFS Test Suite will add users and groups to test machine to verify functionality. Therefore it is strongly advised that a dedicated test machine, which can be a VM, be used for testing.

Once the pre-requisites are satisfied simply run the zfs-tests.sh script:

$ /usr/share/zfs/zfs-tests.sh

Alternately, the zfs-tests.sh script can be run from the source tree to allow developers to rapidly validate their work. In this mode the ZFS utilities and modules from the source tree will be used (rather than those installed on the system). In order to avoid certain types of failures you will need to ensure the ZFS udev rules are installed. This can be done manually or by ensuring some version of ZFS is installed on the system.

$ ./scripts/zfs-tests.sh

The following zfs-tests.sh options are supported:

-v          Verbose zfs-tests.sh output When specified additional
            information describing the test environment will be logged
            prior to invoking test-runner.  This includes the runfile
            being used, the DISKS targeted, pools to keep, etc.

-q          Quiet test-runner output.  When specified it is passed to
            test-runner(1) which causes output to be written to the
            console only for tests that do not pass and the results
            summary.

-x          Remove all testpools, dm, lo, and files (unsafe).  When
            specified the script will attempt to remove any leftover
            configuration from a previous test run.  This includes
            destroying any pools named testpool, unused DM devices,
            and loopback devices backed by file-vdevs.  This operation
            can be DANGEROUS because it is possible that the script
            will mistakenly remove a resource not related to the testing.

-k          Disable cleanup after test failure.  When specified the
            zfs-tests.sh script will not perform any additional cleanup
            when test-runner exists.  This is useful when the results of
            a specific test need to be preserved for further analysis.

-f          Use sparse files directly instread of loopback devices for
            the testing.  When running in this mode certain tests will
            be skipped which depend on real block devices.

-d DIR      Create sparse files for vdevs in the DIR directory.  By
            default these files are created under /var/tmp/.

-s SIZE     Use vdevs of SIZE (default: 4G)

-r RUNFILE  Run tests in RUNFILE (default: linux.run)

The ZFS Test Suite allows the user to specify a subset of the tests via a runfile. The format of the runfile is explained in test-runner(1), and the files that zfs-tests.sh uses are available for reference under /usr/share/zfs/runfiles. To specify a custom runfile, use the -r option:

$ /usr/share/zfs/zfs-tests.sh -r my_tests.run
  1. Test results

While the ZFS Test Suite is running, one informational line is printed at the end of each test, and a results summary is printed at the end of the run. The results summary includes the location of the complete logs, which is logged in the form /var/tmp/test_results/[ISO 8601 date]. A normal test run launched with the zfs-tests.sh wrapper script will look something like this:

$ /usr/share/zfs/zfs-tests.sh -v -d /mnt

--- Configuration --- Runfile: /usr/share/zfs/runfiles/linux.run STF_TOOLS: /usr/share/zfs/test-runner STF_SUITE: /usr/share/zfs/zfs-tests FILEDIR: /mnt FILES: /mnt/file-vdev0 /mnt/file-vdev1 /mnt/file-vdev2 LOOPBACKS: /dev/loop0 /dev/loop1 /dev/loop2 DISKS: loop0 loop1 loop2 NUM_DISKS: 3 FILESIZE: 4G Keep pool(s): rpool

/usr/share/zfs/test-runner/bin/test-runner.py -c
/usr/share/zfs/runfiles/linux.run -i /usr/share/zfs/zfs-tests Test: .../tests/functional/acl/posix/setup (run as root) [00:00] [PASS] ...470 additional tests... Test: .../tests/functional/zvol/zvol_cli/cleanup (run as root) [00:00] [PASS]

Results Summary PASS 472

Running Time: 00:45:09 Percent passed: 100.0% Log directory: /var/tmp/test_results/20160316T181651