Commit Graph

333 Commits

Author SHA1 Message Date
наб 15b982492a cstyle: forbid ARGSUSED
Reviewed-by: Alejandro Colomar <alx.manpages@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #13110
2022-02-18 09:35:06 -08:00
Rich Ercolani 0df22afea2
Colorize the Github test output
Let's color our workflow test output for better readability.

Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #13000
2022-02-16 11:40:25 -08:00
Damian Szuberski 8df0bde321
Add `--enable=all` to ShellCheck by default
Change enforced shell type from `dash` to `sh` and excluded
`SC2039` and `SC3043` by default. `local` keyword is accepted by all
POSIX shells from practical point of view. There is no need anymore
to enforce dash so `local` is accepted.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #13020
2022-02-07 11:59:09 -08:00
Damian Szuberski 63652e1546
Add `--enable-asan` and `--enable-ubsan` switches
`configure` now accepts `--enable-asan` and `--enable-ubsan` switches
which results in passing `-fsanitize=address`
and `-fsanitize=undefined`, respectively, to the compiler. Those
flags are enabled in GitHub workflows for ZTS and zloop. Errors
reported by both instrumentations are corrected, except for:

- Memory leak reporting is (temporarily) suppressed. The cost of
  fixing them is relatively high compared to the gains.

- Checksum computing functions in `module/zcommon/zfs_fletcher*`
  have UBSan errors suppressed. It is completely impractical
  to enforce 64-byte payload alignment there due to performance
  impact.

- There's no ASan heap poisoning in `module/zstd/lib/zstd.c`. A custom
  memory allocator is used there rendering that measure
  unfeasible.

- Memory leaks detection has to be suppressed for `cmd/zvol_id`.
  `zvol_id` is run by udev with the help of `ptrace(2)`. Tracing is
  incompatible with memory leaks detection.

Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #12928
2022-02-03 14:35:38 -08:00
наб 142a5010ab
Notice if the test-runner dies
Currently, we seem to only care if the results collector errors.
We also should care if the test-runner died.

Authored-by: Rich Ercolani <rincebrain@gmail.com>
Co-authored-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by:  Damian Szuberski <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12998
2022-02-02 14:17:46 -08:00
Damian Szuberski 836136961a
Add ShellCheck's `--enable=all` inside `scripts/`
Strengthen static code analysis for shell scripts.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #12914
2022-01-13 11:09:19 -07:00
Paul Dagnelie 2320e6eb43
Add zfs-test facility to automatically rerun failing tests
This was a project proposed as part of the Quality theme for the
hackthon for the 2021 OpenZFS Developer Summit. The idea is to improve
the usability of the automated tests that get run when a PR is created
by having failing tests automatically rerun in order to make flaky
tests less impactful.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #12740
2021-12-01 10:38:53 -07:00
jokersus b5c16861e9
Remove REMAKE_INITRD
The option has been deprecated in dkms and will break packaging in
future versions. See https://github.com/dell/dkms/commit/7114c62

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: jokersus <jokersus.cava@gmail.com>
Closes #12781
2021-11-30 11:09:15 -08:00
Damian Szuberski 34eef3e9a7
Pass `--enable=all` to shellcheck within contrib/
- Remove `SHELLCHECK_IGNORE` in favor of inline suppressions
  and more general `SHELLCHECK_OPTS`.

- Exclude `SC2250` (turned on by `--enable=all`) globally

- Pass `--enable=all` to shellcheck for scripts in contrib/: it's
  very important to catch errors early in areas that are not easily
  testable.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #12760
2021-11-30 10:23:10 -08:00
наб 420b44488f
Remove basename(1). Clean up/shorten some coreutils pipelines
Basenames that remain, in cmd/zed/zed.d/statechange-led.sh:
	dev=$(basename "$(echo "$therest" | awk '{print $(NF-1)}')")
	vdev=$(basename "$ZEVENT_VDEV_PATH")
I don't wanna interfere with #11988

scripts/zfs-tests.sh:
	SINGLETESTFILE=$(basename "$SINGLETEST")
tests/zfs-tests/tests/functional/cli_user/zfs_list/zfs_list.kshlib:
	ACTUAL=$(basename $dataset)
	ACTUAL=$(basename $dataset)
tests/zfs-tests/tests/functional/cli_user/zpool_iostat/
	zpool_iostat_-c_homedir.ksh:
	typeset USER_SCRIPT=$(basename "$USER_SCRIPT_FULL")
tests/zfs-tests/tests/functional/cli_user/zpool_iostat/
	zpool_iostat_-c_searchpath.ksh:
	typeset CMD_1=$(basename "$SCRIPT_1")
	typeset CMD_2=$(basename "$SCRIPT_2")
tests/zfs-tests/tests/functional/cli_user/zpool_status/
	zpool_status_-c_homedir.ksh:
	typeset USER_SCRIPT=$(basename "$USER_SCRIPT_FULL")
tests/zfs-tests/tests/functional/cli_user/zpool_status/
	zpool_status_-c_searchpath.ksh
	typeset CMD_1=$(basename "$SCRIPT_1")
	typeset CMD_2=$(basename "$SCRIPT_2")
tests/zfs-tests/tests/functional/migration/migration.cfg:
	export BNAME=`basename $TESTFILE`
tests/zfs-tests/tests/perf/perf.shlib:
	typeset logbase="$(get_perf_output_dir)/$(basename \
tests/zfs-tests/tests/perf/perf.shlib:
	typeset logbase="$(get_perf_output_dir)/$(basename \

These are potentially Of Directories, where basename is actually
useful

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12652
2021-11-11 13:27:37 -07:00
Damian Szuberski 6d680e61ef
Update `checkstyle` workflow env to ubuntu-20.04
- `checkstyle` workflow uses ubuntu-20.04 environment
- improved `mancheck.sh` readability

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes #12713
2021-11-02 14:02:57 -06:00
Ryan Moeller 6daf036ab5
Add zfs.sh -r flag to reload modules
zfs.sh already can load and unload, so why not both?

This is convenient when developing changes to the module and you want
to rapidly make some changes, rebuild the module, reload the module,
and test the changes.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12450
2021-08-13 13:37:46 -07:00
John Wren Kennedy bdd2bfd02c
Assorted fixes for the performance tests
- Bail out early if we're running the perf tests and forget to
  specify disks.
- Allow perf tests to run with any number of disks.
- Remove weekly vs. nightly settings
- Move variables with common values to perf.shlib
- Use zinject to clear the ARC over export/import
- Fix dbuf cache size calculation

When the meaning of `dbuf_cache_max_bytes` changed, the performance
test that covers the dbuf cache started to fail. The test would try to
write files for the test using the max possible size of the cache,
inevitably filling the pool and failing. This change uses
`dbuf_cache_shift` to correctly calculate the dbuf cache size.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>
Closes #12408
2021-07-26 15:47:08 -06:00
Ryan Moeller 14b43fbd9c
zloop: Add a max iterations option, use default run/pass times
It is useful to have control over the number of iterations of zloop so
we can easily produce "x core dumps found *in y iterations*" metrics.

Using random values for run/pass times doesn't improve coverage in a
meaningful way.

Randomizing run time could be seen as a compromise between running a
greater variety of shorter tests versus a smaller variety of longer
tests within a fixed time span.  However, it is not desirable when
running a fixed number of iterations.

Pass time already incorporates randomness within ztest.

Either parameter can be passed to ztest explicitly if the defaults are
not satisfactory.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12411
2021-07-22 15:29:27 -06:00
наб 10bcc4da6c scripts/commitcheck.sh: fix false positive for signed commits
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12105
2021-06-11 09:10:25 -07:00
наб 2badb3457a Move properties, parameters, events, and concepts around manual sections
The pages moved as follows:
  zpool-features.{5 => 7}
  spl{-module-parameters.5 => .4}
  zfs{-module-parameters.5 => .4}
  zfs-events.5 => into zpool-events.8
  zfsconcepts.{8 => 7}
  zfsprops.{8 => 7}
  zpoolconcepts.{8 => 7}
  zpoolprops.{8 => 7}

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Co-authored-by: Daniel Ebdrup Jensen <debdrup@FreeBSD.org>
Closes #12149
Closes #12212
2021-06-09 14:35:30 -07:00
Brian Behlendorf 88af959b24
Fix minor shellcheck 0.7.2 warnings
The first warning of a misspelling is a false positive, so we annotate
the script accordingly.  As for the x-prefix warnings update the check
to use the conventional '[ -z <string> ]' syntax.

all-syslog.sh:46:47: warning: Possible misspelling: ZEVENT_ZIO_OBJECT
    may not be assigned, but ZEVENT_ZIO_OBJSET is. [SC2153]
make_gitrev.sh:53:6: note: Avoid x-prefix in comparisons as it no
    longer serves a purpose [SC2268]
man-dates.sh:10:7: note: Avoid x-prefix in comparisons as it no
    longer serves a purpose [SC2268]

Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12208
2021-06-09 12:21:24 -07:00
наб 2d815d955e
Modernise/fix/rewrite unlinted manpages
zpool-destroy.8: flatten, fix description
zfs-wait.8: flatten, fix description, use list for events
zpool-reguid.8: flatten, fix description
zpool-history.8: flatten, fix description
zpool-export.8: flatten, fix description, remove -f "unmount" reference
  AFAICT no such command exists even in Illumos (as of today, anyway),
  and we definitely don't call it
zpool-labelclear.8: flatten, fix description
zpool-features.5: modernise
spl-module-parameters.5: modernise
zfs-mount-generator.8: rewrite
zfs-module-parameters.5: modernise

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12169
2021-06-07 13:41:54 -06:00
наб 4a98300feb mancheck: accept lints, accept lint overrides
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12129
2021-06-04 12:48:26 -07:00
наб f7d7ee0583 Turn checkbashisms into a make target
make_gitrev.sh actually breaks checkbashisms' parser,
which /insists/ that the end-of-line " is actually a string start

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12101
2021-06-01 11:38:54 -07:00
наб c3ef9f7528 Turn shellcheck into a normal make target. Fix new files it caught
This checks every file it checked (and a few more),
but explicitly instead of "if it works it works" best-effort
(which wasn't that good anyway)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #10512
Closes #12101
2021-06-01 11:38:49 -07:00
наб 6fc3099248 Trim excess shellcheck annotations. Widen to all non-Korn scripts
Before, make shellcheck checked
  scripts/{commitcheck,make_gitrev,man-dates,paxcheck,zfs-helpers,zfs,
           zfs-tests,zimport,zloop}.sh
  cmd/zed/zed.d/{{all-debug,all-syslog,data-notify,generic-notify,
                 resilver_finish-start-scrub,scrub_finish-notify,
                 statechange-led,statechange-notify,trim_finish-notify,
                 zed-functions}.sh,history_event-zfs-list-cacher.sh.in}
  cmd/zpool/zpool.d/{dm-deps,iostat,lsblk,media,ses,smart,upath}
now it also checks
  contrib/dracut/{02zfsexpandknowledge/module-setup,
                  90zfs/{export-zfs,parse-zfs,zfs-needshutdown,
                         zfs-load-key,zfs-lib,module-setup,
                         mount-zfs,zfs-generator}}.sh.in
  cmd/zed/zed.d/{pool_import-led,vdev_attach-led,
                 resilver_finish-notify,vdev_clear-led}.sh
  contrib/initramfs/{zfsunlock,hooks/zfs.in,scripts/local-top/zfs}
  tests/zfs-tests/tests/perf/scripts/prefetch_io.sh
  scripts/common.sh.in
  contrib/bpftrace/zfs-trace.sh
  autogen.sh

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12042
2021-05-20 08:55:23 -07:00
наб 2ca77988a5 Fix SC2181 ("[ $?") outside tests/
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #12042
2021-05-20 08:54:47 -07:00
наб 1966e959ca Replace ZoL with OpenZFS where applicable
Afterward, git grep ZoL matches:
  * README.md:  * [ZoL Site](https://zfsonlinux.org)
  - Correct
  * etc/default/zfs.in:# ZoL userland configuration.
  - Changing this would induce a needless upgrade-check,
    if the user has modified the configuration;
    this can be updated the next time the defaults change
  * module/zfs/dmu_send.c:   * ZoL < 0.7 does not handle [...]
  - Before 0.7 is ZoL, so fair enough

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #11956
2021-05-07 17:20:37 -07:00
Marcin Skarbek 7367be0da9
Add kmodtool fix to detect different System.map location
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Marcin Skarbek <git@skarbek.name>
Closes #7807 
Closes #11836
2021-04-07 10:17:39 -07:00
Adam D. Moss 9312e0fd1e
Fix error message when zfs module are already unloaded
Using zfs-sh -u on linux will fail with inaccurate message when the
zfs modules are already unloaded.  Deal with the case where a module 
is already unloaded; its USE_COUNT will be the empty string

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Adam Moss <c@yotes.com>
Closes #11627
2021-02-20 20:23:10 -08:00
Colm 658fb8020f
Add "compatibility" property for zpool feature sets
Property to allow sets of features to be specified; for compatibility
with specific versions / releases / external systems. Influences
the behavior of 'zpool upgrade' and 'zpool create'. Initial man
page changes and test cases included.

Brief synopsis:

zpool create -o compatibility=off|legacy|file[,file...] pool vdev...

compatibility = off : disable compatibility mode (enable all features)
compatibility = legacy : request that no features be enabled
compatibility = file[,file...] : read features from specified files.
Only features present in *all* files will be enabled on the
resulting pool. Filenames may be absolute, or relative to
/etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d (/etc
checked first).

Only affects zpool create, zpool upgrade and zpool status.

ABI changes in libzfs:

* New function "zpool_load_compat" to load and parse compat sets.
* Add "zpool_compat_status_t" typedef for compatibility parse status.
* Add ZPOOL_PROP_COMPATIBILITY to the pool properties enum
* Add ZPOOL_STATUS_COMPATIBILITY_ERR to the pool status enum

An initial set of base compatibility sets are included in
cmd/zpool/compatibility.d, and the Makefile for cmd/zpool is
modified to install these in $pkgdatadir/compatibility.d and to
create symbolic links to a reasonable set of aliases.

Reviewed-by: ericloewe
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes #11468
2021-02-17 21:30:45 -08:00
gregory-lee-bartholomew e2d952cda0
DKMS: Disable weak modules
Fedora does not guarantee a stable kABI, so weak modules should be dis-
abled. See the dkms man page for a more detailed explanation of the weak
module feature.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com>
Closes #9891
Closes #11128
Closes #11242
Closes #11335
2020-12-15 09:22:30 -08:00
Brian Behlendorf 1ad07b01bc
Remove draid.d symlink from zfs_helpers.sh
In an earlier revision of dRAID there existed an /etc/zfs/draid.d
directory.  This was removed before the final version was integrated
but a little bit was accidentally overlooked in the zfs_helpers.sh
script.  Remove this remnant. 

Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11326
2020-12-11 11:00:58 -08:00
qzdanis 9109b89cd7
Add compatibility for busybox mktemp
Busybox's mktemp requires at least six X's in the template, causing
the current sed --in-place check to fail because the file does not
exist. This change adds additional X's to mktemp templates that do
not already have at least six X's in them.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Quentin Zdanis <zdanisq@gmail.com>
Closes #11269
2020-12-03 10:01:16 -08:00
Pavel Snajdr 52c8537513
zpool_influxdb: move to libexec dir
Move the zpool_influxdb command to /usr/libexec/zfs,
and include the /usr/libexec/zfs path in the system search
directory when running the test suite.

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes #11156
Closes #11160
Closes #11224
2020-11-28 11:15:57 -08:00
Brian Behlendorf b2255edcc0
Distributed Spare (dRAID) Feature
This patch adds a new top-level vdev type called dRAID, which stands
for Distributed parity RAID.  This pool configuration allows all dRAID
vdevs to participate when rebuilding to a distributed hot spare device.
This can substantially reduce the total time required to restore full
parity to pool with a failed device.

A dRAID pool can be created using the new top-level `draid` type.
Like `raidz`, the desired redundancy is specified after the type:
`draid[1,2,3]`.  No additional information is required to create the
pool and reasonable default values will be chosen based on the number
of child vdevs in the dRAID vdev.

    zpool create <pool> draid[1,2,3] <vdevs...>

Unlike raidz, additional optional dRAID configuration values can be
provided as part of the draid type as colon separated values. This
allows administrators to fully specify a layout for either performance
or capacity reasons.  The supported options include:

    zpool create <pool> \
        draid[<parity>][:<data>d][:<children>c][:<spares>s] \
        <vdevs...>

    - draid[parity]       - Parity level (default 1)
    - draid[:<data>d]     - Data devices per group (default 8)
    - draid[:<children>c] - Expected number of child vdevs
    - draid[:<spares>s]   - Distributed hot spares (default 0)

Abbreviated example `zpool status` output for a 68 disk dRAID pool
with two distributed spares using special allocation classes.

```
  pool: tank
 state: ONLINE
config:

    NAME                  STATE     READ WRITE CKSUM
    slag7                 ONLINE       0     0     0
      draid2:8d:68c:2s-0  ONLINE       0     0     0
        L0                ONLINE       0     0     0
        L1                ONLINE       0     0     0
        ...
        U25               ONLINE       0     0     0
        U26               ONLINE       0     0     0
        spare-53          ONLINE       0     0     0
          U27             ONLINE       0     0     0
          draid2-0-0      ONLINE       0     0     0
        U28               ONLINE       0     0     0
        U29               ONLINE       0     0     0
        ...
        U42               ONLINE       0     0     0
        U43               ONLINE       0     0     0
    special
      mirror-1            ONLINE       0     0     0
        L5                ONLINE       0     0     0
        U5                ONLINE       0     0     0
      mirror-2            ONLINE       0     0     0
        L6                ONLINE       0     0     0
        U6                ONLINE       0     0     0
    spares
      draid2-0-0          INUSE     currently in use
      draid2-0-1          AVAIL
```

When adding test coverage for the new dRAID vdev type the following
options were added to the ztest command.  These options are leverages
by zloop.sh to test a wide range of dRAID configurations.

    -K draid|raidz|random - kind of RAID to test
    -D <value>            - dRAID data drives per group
    -S <value>            - dRAID distributed hot spares
    -R <value>            - RAID parity (raidz or dRAID)

The zpool_create, zpool_import, redundancy, replacement and fault
test groups have all been updated provide test coverage for the
dRAID feature.

Co-authored-by: Isaac Huang <he.huang@intel.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Co-authored-by: Don Brady <don.brady@delphix.com>
Co-authored-by: Matthew Ahrens <mahrens@delphix.com>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mmaybee@cray.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10102
2020-11-13 13:51:51 -08:00
Ryan Moeller 777b8ccc35
Fix commitcheck on FreeBSD
Convert from bash to sh, avoid Perl regexes and \s, prune unused
functions.

Reviewed-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes #11070
2020-10-20 08:35:53 -07:00
Adam D. Moss 92286311f8
Add zfs.sh module unload error message
If modules fail to unload because of outstanding users, don't 
consider this a success.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Adam Moss <c@yotes.com>
Closes #11042
2020-10-13 16:51:54 -07:00
Brian Behlendorf d0249a4bd0
Replace ZFS on Linux references with OpenZFS
This change updates the documentation to refer to the project
as OpenZFS instead ZFS on Linux.  Web links have been updated
to refer to https://github.com/openzfs/zfs.  The extraneous
zfsonlinux.org web links in the ZED and SPL sources have been
dropped.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #11007
2020-10-08 20:10:13 -07:00
Kjeld Schouten-Lebbing eb267f08cf
Update issue templates, commitcheck and Contributing.md
- Removes OpenZFS ports from commit check
- Removes OpenZFS ports from CONTRIBUTING.md
- Adds mailings lists and IRC to issue template selector
- Remove blank issue option from issue creator

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Closes #10965
2020-09-23 09:53:26 -07:00
Peter Dave Hello 5a877a894e
Add a missing option prefix `-` in zfs-tests.sh usage()
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Peter Dave Hello <hsu@peterdavehello.org>
Closes #10893
2020-09-08 09:04:36 -07:00
Ryan Moeller 72eedb69fd
ZTS: Remove leftover variable names
These were overlooked when use of `local` was removed to satisfy
checkbashisms.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10762
2020-08-22 11:05:59 -07:00
Brian Behlendorf 64025fa3a1
Silence 'make checkbashisms'
Commit d2bce6d03 added the 'make checkbashisms' target but did not
resolve all of the bashisms in the scripts.  This commit doesn't
resolve them all either but it does fix up a few, and it excludes
the others so 'make checkstyle' no longer prints warnings.  It's
a small step in the right direction.

* Dracut is Linux specific and itself depends on bash.  Therefore
  all dracut support scripts can be bash specific, update their
  shebang accordingly.

* zed-functions.sh, zfs-import, zfs-mount, zfs-zed, smart
  paxcheck.sh, make_gitrev.sh - these scripts were excuded from
  the check until they can be updated and properly tested.

* zfsunlock - only whole values for sleep are allowed.

* vdev_id - removed unneeded locals; use && instead of -a.

* dkms.mkconf, dkms.postbuil - use || instead of -o.

Reviewed-by: InsanePrawn <insane.prawny@gmail.com>
Reviewed-by:  Gabriel A. Devenyi <gdevenyi@gmail.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10755
2020-08-20 13:45:47 -07:00
Michael Niewöhner 10b3c7f5e4 Add zstd support to zfs
This PR adds two new compression types, based on ZStandard:

- zstd: A basic ZStandard compression algorithm Available compression.
  Levels for zstd are zstd-1 through zstd-19, where the compression
  increases with every level, but speed decreases.

- zstd-fast: A faster version of the ZStandard compression algorithm
  zstd-fast is basically a "negative" level of zstd. The compression
  decreases with every level, but speed increases.

  Available compression levels for zstd-fast:
   - zstd-fast-1 through zstd-fast-10
   - zstd-fast-20 through zstd-fast-100 (in increments of 10)
   - zstd-fast-500 and zstd-fast-1000

For more information check the man page.

Implementation details:

Rather than treat each level of zstd as a different algorithm (as was
done historically with gzip), the block pointer `enum zio_compress`
value is simply zstd for all levels, including zstd-fast, since they all
use the same decompression function.

The compress= property (a 64bit unsigned integer) uses the lower 7 bits
to store the compression algorithm (matching the number of bits used in
a block pointer, as the 8th bit was borrowed for embedded block
pointers).  The upper bits are used to store the compression level.

It is necessary to be able to determine what compression level was used
when later reading a block back, so the concept used in LZ4, where the
first 32bits of the on-disk value are the size of the compressed data
(since the allocation is rounded up to the nearest ashift), was
extended, and we store the version of ZSTD and the level as well as the
compressed size. This value is returned when decompressing a block, so
that if the block needs to be recompressed (L2ARC, nop-write, etc), that
the same parameters will be used to result in the matching checksum.

All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`,
`zio_prop_t`, etc.) uses the separated _compress and _complevel
variables.  Only the properties ZAP contains the combined/bit-shifted
value. The combined value is split when the compression_changed_cb()
callback is called, and sets both objset members (os_compress and
os_complevel).

The userspace tools all use the combined/bit-shifted value.

Additional notes:

zdb can now also decode the ZSTD compression header (flag -Z) and
inspect the size, version and compression level saved in that header.
For each record, if it is ZSTD compressed, the parameters of the decoded
compression header get printed.

ZSTD is included with all current tests and new tests are added
as-needed.

Per-dataset feature flags now get activated when the property is set.
If a compression algorithm requires a feature flag, zfs activates the
feature when the property is set, rather than waiting for the first
block to be born.  This is currently only used by zstd but can be
extended as needed.

Portions-Sponsored-By: The FreeBSD Foundation
Co-authored-by: Allan Jude <allanjude@freebsd.org>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Co-authored-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #6247
Closes #9024
Closes #10277
Closes #10278
2020-08-20 10:30:06 -07:00
George Melikov 42d4a8e5fe cstyle.pl: echo commands for github workflow
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #10705
2020-08-13 14:58:53 -07:00
Ryan Moeller d4e6e9597d
ZTS: Remove bashisms from zfs-tests.sh
Bring zfs-tests.sh in to compliance with the other scripts
by converting it /bin/sh for to avoid a dependency on bash.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #10640
2020-08-07 14:10:48 -07:00
Arvind Sankar 59415fc9fb Add zfs_gitrev.h to the distributed sources
Commit 109d2c9310 ("Move zfs_gitrev.h to build directory") stopped
distributing zfs_gitrev.h, as it is a generated file. Add it back, with
some changes in behavior.

Change the logic for gitrev as follows
- if the source tree is a git repository, the behavior for build is
  unchanged. For make dist, append -dist to the git tag in the
  distributed version of zfs_gitrev.h.
- otherwise, check if the source tree contains zfs_gitrev.h, and use it
  if so, falling back to "unknown" if it doesn't exist.
- clean it only in make maintainer-clean, so we don't remove it from the
  source tree on make clean or make distclean.

This allows disted sources to track what git tag they originally came
from, with the -dist suffix indicating that the code wasn't built
directly from git and so might contain additional changes beyond the git
tag.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10595
2020-07-22 10:00:40 -07:00
Arvind Sankar d32a59fe2b Restore scripts/make_gitrev.sh
Commit 109d2c9310 ("Move zfs_gitrev.h to build directory") removed
scripts/make_gitrev.sh, putting the logic into the Makefile itself.

However, at least the Arch Linux packager wants the script so that the
file can be generated without having to run configure first, for
DKMS packaging purposes.

So move the make recipe back into the script.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10595
2020-07-22 09:59:36 -07:00
Arvind Sankar 38e2e9ce83 Centralize variable substitution
A bunch of places need to edit files to incorporate the configured paths
i.e. bindir, sbindir etc. Move this logic into a common file.

Create arc_summary by copying arc_summary[23] as appropriate at build
time instead of install time.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10559
2020-07-14 17:33:44 -07:00
Arvind Sankar 7513807320 Drop unnecessary srcdir paths
There's no need to specify the srcdir explicitly in _HEADERS and
EXTRA_DIST.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10493
2020-06-24 18:20:18 -07:00
Arvind Sankar 109d2c9310 Move zfs_gitrev.h to build directory
Currently an out-of-tree build does not work with read-only source
directory because zfs_gitrev.h can't be created. Move this file to the
build directory, which is more appropriate for a generated file, and
drop the dist-hook for zfs_gitrev.h. There is no need to distribute this
file since it will be regenerated as part of the compilation in any
case.

scripts/make_gitrev.sh tries to avoid updating zfs_gitrev.h if there has
been no change, however this doesn't cover the case when the source
directory is not in git: in that case zfs_gitrev.h gets overwritten even
though it's always "unknown". Simplify the logic to always write out a
new version of zfs_gitrev.h, compare against the old and overwrite only
if different. This is now simple enough to just include in the
Makefile, so drop the script.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Closes #10493
2020-06-24 18:19:28 -07:00
Matthew Macy 9f0a21e641
Add FreeBSD support to OpenZFS
Add the FreeBSD platform code to the OpenZFS repository.  As of this
commit the source can be compiled and tested on FreeBSD 11 and 12.
Subsequent commits are now required to compile on FreeBSD and Linux.
Additionally, they must pass the ZFS Test Suite on FreeBSD which is
being run by the CI.  As of this commit 1230 tests pass on FreeBSD
and there are no unexpected failures.

Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #898 
Closes #8987
2020-04-14 11:36:28 -07:00
Olaf Faaland 61871518dd
zloop.sh should call ZDB with pool name
Commit 54007c79 introduced an error, changing the final
argument to $ZDB from ztest to $ZTEST.  This argument
indicates the pool name, not the script, and so should
not have been changed.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #10118
2020-03-11 10:02:23 -07:00
Graham Christensen dda702fd16
bash scripts: use /usr/bin/env for bash shebangs
Not all systems / distros have a `/bin/bash`, and these scripts are
more difficult to run at development time.

For example, my system is NixOS which doesn't have a /bin/bash. This
is not a problem for NixOS building ZFS as a package: the build
environment automatically replaces these shebangs with corrected
paths.

The problem is much more annoying at development time: either the
scripts don't run, or I correct them for my local machine and deal with
a perpetually dirty work tree.

Before committing this patch I confirmed there are existing scripts
which use `/usr/bin/env` to locate bash, so I am thinking this is a
safe transformation.

There are a handful of other shebangs in this repository which don't
work on my system. This patch is useful on its own specifically for
`commitcheck.sh`, otherwise I can't validate my commits before
submission.

Here are the remaining shebangs which NixOS systems won't have:

       1274 #!/bin/ksh -p
         91 #!/bin/ksh
         89 #! /bin/ksh -p
          2 #!/bin/sed -f
          1 #!/usr/bin/perl -w
          1 #!/usr/bin/ksh
          1 #!/bin/nawk -f

plus this which will create an invalid shebang in
`tests/zfs-tests/tests/functional/mv_files/mv_files_common.kshlib`:

        echo "#!/bin/ksh" > $TEST_BASE_DIR/exitsZero.ksh

I chose to leave those alone for now, and gauge the interest in this
much smaller patch first.

The fixes for these are easy enough by simply using `/usr/bin/env ksh`:

         91 #!/bin/ksh
          1 #!/usr/bin/ksh

The fix for the other set is much trickier. Quoting the GNU coreutils
manual:

    Most operating systems (e.g. GNU/Linux, BSDs) treat all text after
    the first space as a single argument. When using env in a script it
    is thus not possible to specify multiple arguments.

and not all `env`'s support arguments.

Mine (GNU Coreutils 8.31) does, though this feature is new since
April 2018, GNU Coreutils 8.30:
https://git.savannah.gnu.org/cgit/coreutils.git/commit/?id=668306ed86c8c79b0af0db8b9c882654ebb66db2

and worse, requires the -S argument:

    -S, --split-string=S  process and split S into separate arguments;
                          used to pass multiple arguments on shebang
                          lines

Example:

    $ seq 1 2 | $(nix-build '<nixpkgs>' -A coreutils)/bin/env "sort -nr"
    /nix/[...]-coreutils-8.31/bin/env: ‘sort -nr’: No such file or directory
    /nix/[...]-coreutils-8.31/bin/env: use -[v]S to pass options in shebang lines

    $ seq 1 2 | $(nix-build '<nixpkgs>' -A coreutils)/bin/env "-S sort -nr"
    2
    1

GNU Coreutils says FreeBSD's `env` does, though I wonder if FreeBSD's
would be unhappy with the `-S`:
https://www.gnu.org/software/coreutils/manual/html_node/env-invocation.html#env-invocation

BusyBox v1.30.1 does not, and does not have a `-S`-like option:

    $ seq 1 2 | $(nix-build '<nixpkgs>' -A busybox)/bin/env "sort -nr"
    env: can't execute 'sort -nr': No such file or directory

Toybox 0.8.1 also does not, and also does not have a `-S` option:

    $ seq 1 2 | $(nix-build '<nixpkgs>' -A toybox)/bin/env "sort -nr"
    env: exec sort -nr: No such file or directory

---

At any rate, if this patch merges and the remaining ~1,500 are updated,
the much larger patch should probably include a checkstyle-like test
asserting all new shebangs use `/usr/bin/env`. I also don't mind
dealing with NixOS weirdness if the project would prefer that.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Graham Christensen <graham@grahamc.com>
Closes #9893
2020-02-10 13:13:46 -08:00
Ryan Moeller 74b4d349b3
ZTS: Reverse constrained path lookup order
FreeBSD base system zfs utils are in /sbin. ZoF utils install to
/usr/local/sbin.

Ensure we link to the ZoF utils not the base utils when searching for
utils to constrain paths to for the tests.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #9906
2020-01-29 11:23:20 -08:00
Christian Schwarz 603059e41a scripts/zfs-test.sh: example for -t
Add an example for running a single test case.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #9878
2020-01-23 21:11:05 -08:00
Ryan Moeller 54007c791f Add FreeBSD core handling in zloop.sh
And use the correct path to libtool and ztest.

Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9790
2020-01-02 13:48:06 -08:00
Ryan Moeller a3640486ff Update zfs.sh work on FreeBSD
Extend the zfs.sh script to load and unload zfs kmods on FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9746
2019-12-19 09:31:16 -08:00
Matthew Macy 7839c4b5e1 Update ZTS to work on FreeBSD
Update the common ZTS scripts and individual test cases as needed 
in order to allow them to be run on FreeBSD.  The high level goal
is to provide compatibility wrappers whenever possible to minimize
changes to individual test cases.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9692
2019-12-18 12:29:43 -08:00
Ryan Moeller 5e74ac51c7 Move platform independent tests to a shared runfile
Tests that aren't limited to running on Linux can be moved to a common
runfile to be shared with other platforms.

The test runner and wrapper script are enhanced to allow specifying
multiple runfiles as a comma-separated list. The default runfiles are
now "common.run,PLATFORM.run" where PLATFORM is determined at run time.

Sections in runfiles that share a path with another runfile can append
a colon separator and an identifier to the path in the section
name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests
specified by other runfiles.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9391
2019-10-09 10:39:26 -07:00
Brian Behlendorf 5b51c15861
kmodtool: depmod path
Determine the location of depmod on the system, either /sbin/depmod or
/usr/sbin/depmod.  Then use that path when generating the specfile.

Additionally, update the Requires lines to reference the package which
provides depmod rather than the binary itself.  For CentOS/RHEL 7+8
and all supported Fedora releases this is the kmod package, and for
CentOS/RHEL 6 it is the module-init-tools package.

Reviewed-by: Minh Diep <mdiep@whamcloud.com>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8724
Closes #9310
2019-09-11 11:14:50 -07:00
Andrea Gelmini a57c82fc50 Fix typos
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Closes #9251
2019-09-02 18:17:39 -07:00
Ryan Moeller a18f8bce5c Split argument list, satisfy shellcheck SC2086
Split the arguments for ${TEST_RUNNER} across multiple lines for
clarity. Also added quotes in the message to match the invoked command.

Unquoted variables in argument lists are subject to splitting. In this
particular case we can't quote the variable because it is an optional
argument. Use the method suggested in the description linked below,
instead.

The technique is to use an unquoted variable with an alternate value.

https://github.com/koalaman/shellcheck/wiki/SC2086

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9212
2019-08-25 18:30:39 -07:00
Brian Behlendorf 8f12a4f8d2
Fix out-of-tree build failures
Resolve the incorrect use of srcdir and builddir references for
various files in the build system.  These have crept in over time
and went unnoticed because when building in the top level directory
srcdir and builddir are identical.

With this change it's again possible to build in a subdirectory.

    $ mkdir obj
    $ cd obj
    $ ../configure
    $ make

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8921 
Closes #8943
2019-06-24 09:32:47 -07:00
Samuel VERSCHELDE 01d1e88b1a Fix %post and %postun generation in kmodtool
During zfs-kmod RPM build, $(uname -r) gets unintentionally evaluated on
the build host, once and for all. It should be evaluated during the
execution of the scriptlets on the installation host. Escaping the $
character avoids evaluating it during build.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Samuel Verschelde <stormi-xcp@ylix.fr>
Closes #8866
2019-06-10 09:06:58 -07:00
Jorgen Lundman 876d76be34 Avoid updating zfs_gitrev.h when rev is unchanged
Build process would always re-compile spa_history.c due to touching
zfs_gitrev.h - avoid if no change in gitrev.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #8860
2019-06-06 19:01:41 -07:00
Richard Laager 3b770842d5 Add zol2zfs-patch.sed to Makefile.am and sort
In adding man-dates.sh, I noticed that zol2zfs-patch.sed was missing,
even though zfs2zol-patch.sed was present.  Also, the list was not
sorted, so I sorted it.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #8710
2019-05-08 11:00:11 -07:00
Richard Laager e7ce9759ac Correct man page dates
Various changes (many by me) have been made to the man pages without
bumping their dates.  I have now corrected them based on the last commit
to each file.  I also added the script I used to make these changes.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #8710
2019-05-08 10:59:32 -07:00
Ahmed Ghanem 9634299657 OpenZFS 9185 - Enable testing over NFS in ZFS performance tests
This change makes additions to the ZFS test suite that allows the
performance tests to run over NFS. The test is run and performance data
collected from the server side, while IO is generated on the NFS client.

This has been tested with Linux and illumos NFS clients.

Authored by: Ahmed Ghanem <ahmedg@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Kevin Greene <kevin.greene@delphix.com>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>

OpenZFS-issue: https://www.illumos.org/issues/9185
Closes #8367
2019-02-04 09:27:37 -08:00
bunder2015 bf6ca0a631 shellcheck pass
note: which is non-standard. Use builtin 'command -v' instead. [SC2230]
note: Use -n instead of ! -z. [SC2236]

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #8367
2019-02-04 09:07:19 -08:00
Neal Gompa (ニール・ゴンパ) e45c1734a6 dkms: Enable debuginfo option to be set with zfs sysconfig file
On some Linux distributions, the kernel module build will not
default to building with debuginfo symbols, which can make it
difficult for debugging and testing.

For this case, we provide a flag to override the build to force
debuginfo to be produced for the kernel module build.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Neal Gompa <ngompa@datto.com>
Co-authored-by: Simon Watson <swatson@datto.com>
Signed-off-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Simon Watson <swatson@datto.com>
Closes #8304
2019-01-18 10:10:24 -08:00
Neal Gompa (ニール・ゴンパ) 4efb48eecb Bump commit subject length to 72 characters
There's not really a reason to keep the subject length so short,
since the reason to make it this short was for making nice renders
of a summary list of the git log. With 72 characters, this still
works out fine, so let's just raise it to that so that it's easier
to give slightly more descriptive change summaries.

Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Neal Gompa <ngompa@datto.com>
Closes #8250
2019-01-08 09:23:05 -08:00
Brian Behlendorf 530248d1aa arc_summary: consolidate test case
Since we're only installing one version of arc_summary we only
need one test case.  Update the test to determine which version
is available and then test its supported flags.

Remove files for misc tests which should have been cleaned up.

Reviewed-by: John Ramsden <johnramsden@riseup.net>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8096
2019-01-06 10:39:41 -08:00
Tony Nguyen ef57371a92 Do not enable stack tracer for ZFS performance test
Linux ZFS test suite runs with /proc/sys/kernel/stack_tracer_enabled=1,
via zfs.sh script, which has negative performance impact, up to 40%.

Since large stack is a rare issue now, preferred behavior would be:
- making stack tracer an opt-in feature for zfs.sh
- zfs-test.sh enables stack tracer only when requested

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com>
#8173
2018-12-07 10:51:42 -08:00
Matthew Ahrens da4f331b41 Make gitrev more reliable
In some build methods, the gitrev is unnecessarily set to "unknown".
We can improve this by changing the gitrev to use
`git describe --always --long --dirty`.

This gets the revision even when no tag matches (--always).  It prints
the hash even when it exactly matches a tag (--long).  And if there are
uncommitted changes, it appends "-dirty", rather than failing (--dirty).

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #8034
2018-10-22 12:23:30 -07:00
Matthew Thode 8d43194003 Allow copy-builtin to work with modified sources
`scripts/make_gitrev.sh` had 'set -e' so if any command failed it would
fail and cause copy-builtin to fail (copy-builtin also has `set -e`.
This commit also simplifies scripts/make_gitrev.sh to always write a
file by using a cleanup function.  It also simplifies other areas of
the script as well (making it much shorter).

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Thode <mthode@mthode.org>
Closes #8022 
Closes #8025
2018-10-17 12:06:05 -07:00
Matt Ahrens 5d43cc9a59 OpenZFS 9689 - zfs range lock code should not be zpl-specific
The ZFS range locking code in zfs_rlock.c/h depends on ZPL-specific
data structures, specifically znode_t.  However, it's also used by
the ZVOL code, which uses a "dummy" znode_t to pass to the range
locking code.

We should clean this up so that the range locking code is generic
and can be used equally by ZPL and ZVOL, and also can be used by
future consumers that may need to run in userland (libzpool) as
well as the kernel.

Porting notes:
* Added missing sys/avl.h include to sys/zfs_rlock.h.
* Removed 'dbuf is within the locked range' ASSERTs from dmu_sync().
  This was needed because ztest does not yet use a locked_range_t.
* Removed "Approved by:" tag requirement from OpenZFS commit
  check to prevent needless warnings when integrating changes
  which has not been merged to illumos.
* Reverted free_list range lock changes which were originally
  needed to defer the cv_destroy() which was called immediately
  after cv_broadcast().  With d2733258 this should be safe but
  if not we may need to reintroduce this logic.
* Reverts: The following two commits were reverted and squashed in
  to this change in order to make it easier to apply OpenZFS 9689.
  - d88895a0, which removed the dummy znode from zvol_state
  - e3a07cd0, which updated ztest to use range locks
* Preserved optimized rangelock comparison function.  Preserved the
  rangelock free list.  The cv_destroy() function will block waiting
  for all processes in cv_wait() to be scheduled and drop their
  reference.  This is done to ensure it's safe to free the condition
  variable.  However, blocking while holding the rl->rl_lock mutex
  can result in a deadlock on Linux.  A free list is introduced to
  defer the cv_destroy() and kmem_free() until after the mutex is
  released.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://illumos.org/issues/9689
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/680
External-issue: DLPX-58662
Closes #7980
2018-10-11 10:19:33 -07:00
Matthew Ahrens 4cbde2ecbf Create /proc/sys/kernel/spl/gitrev with git hash
The existing mechanisms for determining what code is running in the
kernel do not always correctly report the git hash.  The versions
reported there do not reflect changes made since `configure` was run
(i.e. incremental builds do not update the version) and they are
misleading if git tags are not set up properly.  This applies to
`modinfo zfs`, `dmesg`, and `/sys/module/zfs/version`.

There are complicated requirements on how the existing version is
generated.  Therefore we are leaving that alone, and adding a new
mechanism to record and retrieve the git hash:
`cat /proc/sys/kernel/spl/gitrev`

The gitrev is re-generated at compile time, when running `make`
(including for incremental builds).  The value is the output of `git
describe` (or "unknown" if not in a git repo or there are uncommitted
changes).

We're also removing /proc/sys/kernel/spl/version, which was never very
useful.

Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #7931 
Closes #7965
2018-10-08 21:57:02 -07:00
Brian Behlendorf a584ef2605
Direct IO support
Direct IO via the O_DIRECT flag was originally introduced in XFS by
IRIX for database workloads. Its purpose was to allow the database
to bypass the page and buffer caches to prevent unnecessary IO
operations (e.g.  readahead) while preventing contention for system
memory between the database and kernel caches.

On Illumos, there is a library function called directio(3C) that
allows user space to provide a hint to the file system that Direct IO
is useful, but the file system is free to ignore it. The semantics
are also entirely a file system decision. Those that do not
implement it return ENOTTY.

Since the semantics were never defined in any standard, O_DIRECT is
implemented such that it conforms to the behavior described in the
Linux open(2) man page as follows.

    1.  Minimize cache effects of the I/O.

    By design the ARC is already scan-resistant which helps mitigate
    the need for special O_DIRECT handling.  Data which is only
    accessed once will be the first to be evicted from the cache.
    This behavior is in consistent with Illumos and FreeBSD.

    Future performance work may wish to investigate the benefits of
    immediately evicting data from the cache which has been read or
    written with the O_DIRECT flag.  Functionally this behavior is
    very similar to applying the 'primarycache=metadata' property
    per open file.

    2. O_DIRECT _MAY_ impose restrictions on IO alignment and length.

    No additional alignment or length restrictions are imposed.

    3. O_DIRECT _MAY_ perform unbuffered IO operations directly
       between user memory and block device.

    No unbuffered IO operations are currently supported.  In order
    to support features such as transparent compression, encryption,
    and checksumming a copy must be made to transform the data.

    4. O_DIRECT _MAY_ imply O_DSYNC (XFS).

    O_DIRECT does not imply O_DSYNC for ZFS.  Callers must provide
    O_DSYNC to request synchronous semantics.

    5. O_DIRECT _MAY_ disable file locking that serializes IO
       operations.  Applications should avoid mixing O_DIRECT
       and normal IO or mmap(2) IO to the same file.  This is
       particularly true for overlapping regions.

    All I/O in ZFS is locked for correctness and this locking is not
    disabled by O_DIRECT.  However, concurrently mixing O_DIRECT,
    mmap(2), and normal I/O on the same file is not recommended.

This change is implemented by layering the aops->direct_IO operations
on the existing AIO operations.  Code already existed in ZFS on Linux
for bypassing the page cache when O_DIRECT is specified.

References:
  * http://xfs.org/docs/xfsdocs-xml-dev/XFS_User_Guide/tmp/en-US/html/ch02s09.html
  * https://blogs.oracle.com/roch/entry/zfs_and_directio
  * https://ext4.wiki.kernel.org/index.php/Clarifying_Direct_IO's_Semantics
  * https://illumos.org/man/3c/directio

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #224 
Closes #7823
2018-08-27 10:04:21 -07:00
Serapheim Dimitropoulos a7ed98d8b5 OpenZFS 9330 - stack overflow when creating a deeply nested dataset
Datasets that are deeply nested (~100 levels) are impractical. We just
put a limit of 50 levels to newly created datasets. Existing datasets
should work without a problem.

The problem can be seen by attempting to create a dataset using the -p
option with many levels:

    panic[cpu0]/thread=ffffff01cd282c20: BAD TRAP: type=8 (#df Double fault) rp=ffffffff

    fffffffffbc3aa60 unix:die+100 ()
    fffffffffbc3ab70 unix:trap+157d ()
    ffffff00083d7020 unix:_patch_xrstorq_rbx+196 ()
    ffffff00083d7050 zfs:dbuf_rele+2e ()
    ...
    ffffff00083d7080 zfs:dsl_dir_close+32 ()
    ffffff00083d70b0 zfs:dsl_dir_evict+30 ()
    ffffff00083d70d0 zfs:dbuf_evict_user+4a ()
    ffffff00083d7100 zfs:dbuf_rele_and_unlock+87 ()
    ffffff00083d7130 zfs:dbuf_rele+2e ()
    ... The block above repeats once per directory in the ...
    ... create -p command, working towards the root ...
    ffffff00083db9f0 zfs:dsl_dataset_drop_ref+19 ()
    ffffff00083dba20 zfs:dsl_dataset_rele+42 ()
    ffffff00083dba70 zfs:dmu_objset_prefetch+e4 ()
    ffffff00083dbaa0 zfs:findfunc+23 ()
    ffffff00083dbb80 zfs:dmu_objset_find_spa+38c ()
    ffffff00083dbbc0 zfs:dmu_objset_find+40 ()
    ffffff00083dbc20 zfs:zfs_ioc_snapshot_list_next+4b ()
    ffffff00083dbcc0 zfs:zfsdev_ioctl+347 ()
    ffffff00083dbd00 genunix:cdev_ioctl+45 ()
    ffffff00083dbd40 specfs:spec_ioctl+5a ()
    ffffff00083dbdc0 genunix:fop_ioctl+7b ()
    ffffff00083dbec0 genunix:ioctl+18e ()
    ffffff00083dbf10 unix:brand_sys_sysenter+1c9 ()

Porting notes:
* Added zfs_max_dataset_nesting module option with documentation.
* Updated zfs_rename_014_neg.ksh for Linux.
* Increase the zfs.sh stack warning to 15K.  Enough time has passed
  that 16K can be reasonably assumed to be the default value.  It
  was increased in the 3.15 kernel released in June of 2014.

Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>

OpenZFS-issue: https://www.illumos.org/issues/9330
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/757a75a
Closes #7681
2018-07-09 13:02:50 -07:00
Brian Behlendorf e4a3297a04
ZTS: Adopt OpenZFS test analysis script
Adopt and extend the OpenZFS ZTS results analysis script for use
with ZFS on Linux.  This allows for automatic analysis of tests
which may be skipped for a variety or reasons or which are not
entirely reliable.

In addition to the list of 'known' failures, which have been updated
for ZFS on Linux, there in a new 'maybe' section.  This mapping
include tests which might be correctly skipped depending on the
test environment.  This may be because of a missing dependency or
lack of required kernel support.  This list also includes tests
which normally pass but might on occasion fail for a harmless
reason.

The script was also extended include a reason for why a given test
might be skipped or may fail.  The reason will be included after
the test in the "results other than PASS that are expected" section.
For failures it is preferable to set the reason to the GitHub issue
number and for skipped tests several generic reasons are available.
You may also specify a custom reason if needed.

All tests were added back in to the linux.run file even if they are
expected to failed.  There is value in running tests which may not
pass, the expected results for these tests has been encoded in
the new analysis script.

All tests which were disabled because they ran more slowly on a
32-bit system have been re-enabled.  Developers working on 32-bit
systems should assess what it reasonable for their environment.

The unnecessary dependency on physical block devices was removed for
the checksum, grow_pool, and grow_replicas test groups so they are
no longer skipped.  Updated the filetest_001_pos test case to run
properly now that it is enabled and moved the grow tests in to a
single directory.

Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7638
2018-06-20 14:03:13 -07:00
Brian Behlendorf 93ce2b4ca5 Update build system and packaging
Minimal changes required to integrate the SPL sources in to the
ZFS repository build infrastructure and packaging.

Build system and packaging:
  * Renamed SPL_* autoconf m4 macros to ZFS_*.
  * Removed redundant SPL_* autoconf m4 macros.
  * Updated the RPM spec files to remove SPL package dependency.
  * The zfs package obsoletes the spl package, and the zfs-kmod
    package obsoletes the spl-kmod package.
  * The zfs-kmod-devel* packages were updated to add compatibility
    symlinks under /usr/src/spl-x.y.z until all dependent packages
    can be updated.  They will be removed in a future release.
  * Updated copy-builtin script for in-kernel builds.
  * Updated DKMS package to include the spl.ko.
  * Updated stale AUTHORS file to include all contributors.
  * Updated stale COPYRIGHT and included the SPL as an exception.
  * Renamed README.markdown to README.md
  * Renamed OPENSOLARIS.LICENSE to LICENSE.
  * Renamed DISCLAIMER to NOTICE.

Required code changes:
  * Removed redundant HAVE_SPL macro.
  * Removed _BOOT from nvpairs since it doesn't apply for Linux.
  * Initial header cleanup (removal of empty headers, refactoring).
  * Remove SPL repository clone/build from zimport.sh.
  * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due
    to build issues when forcing C99 compilation.
  * Replaced legacy ACCESS_ONCE with READ_ONCE.
  * Include needed headers for `current` and `EXPORT_SYMBOL`.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
TEST_ZIMPORT_SKIP="yes"
Closes #7556
2018-05-29 16:00:33 -07:00
Antonio Russo 3e5300e0ed Support Debian DKMS builds
scripts/dkms.mkconf calls configure with
`--with-linux=${kernel_source_dir}`, but Debian puts it kernel source at
`/lib/modules/<version>/source`. This patch adds the same logic to the
DKMS file produced by `scripts/dkms.mkconf` that Debian has shipped in
its official ZFS packaging: at DKMS build time, it checks if the system
is a Debian system, and adjusts the path accordingly.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes #7358 
Closes #7540 
Closes #7554
2018-05-26 10:56:24 -07:00
loli10K 85ce3f4fd1 Adopt pyzfs from ClusterHQ
This commit introduces several changes:

 * Update LICENSE and project information

 * Give a good PEP8 talk to existing Python source code

 * Add RPM/DEB packaging for pyzfs

 * Fix some outstanding issues with the existing pyzfs code caused by
   changes in the ABI since the last time the code was updated

 * Integrate pyzfs Python unittest with the ZFS Test Suite

 * Add missing libzfs_core functions: lzc_change_key,
   lzc_channel_program, lzc_channel_program_nosync, lzc_load_key,
   lzc_receive_one, lzc_receive_resumable, lzc_receive_with_cmdprops,
   lzc_receive_with_header, lzc_reopen, lzc_send_resume, lzc_sync,
   lzc_unload_key, lzc_remap

Note: this commit slightly changes zfs_ioc_unload_key() ABI. This allow
to differentiate the case where we tried to unload a key on a
non-existing dataset (ENOENT) from the situation where a dataset has
no key loaded: this is consistent with the "change" case where trying
to zfs_ioc_change_key() from a dataset with no key results in EACCES.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7230
2018-05-01 10:33:35 -07:00
Tim Chase 5c596ba7a4 Eliminate trailing spaces in DISKS
The zfs-tests.sh driver script could add spaces to the end of $DISKS
which defeates shell-based parsing with constructs such as ${DISKS##* }.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issue #6900
2018-04-13 18:03:58 -07:00
chrisrd e9a7729008 Fix free memory calculation on v3.14+
Provide infrastructure to auto-configure to enum and API changes in the
global page stats used for our free memory calculations.

arc_free_memory has been broken since an API change in Linux v3.14:

2016-07-28 v4.8 599d0c95 mm, vmscan: move LRU lists to node
2016-07-28 v4.8 75ef7184 mm, vmstat: add infrastructure for per-node
  vmstats

These commits moved some of global_page_state() into
global_node_page_state(). The API change was particularly egregious as,
instead of breaking the old code, it silently did the wrong thing and we
continued using global_page_state() where we should have been using
global_node_page_state(), thus indexing into the wrong array via
NR_SLAB_RECLAIMABLE et al.

There have been further API changes along the way:

2017-07-06 v4.13 385386cf mm: vmstat: move slab statistics from zone to
  node counters
2017-09-06 v4.14 c41f012a mm: rename global_page_state to
  global_zone_page_state

...and various (incomplete, as it turns out) attempts to accomodate
these changes in ZoL:

2017-08-24 2209e409 Linux 4.8+ compatibility fix for vm stats
2017-09-16 787acae0 Linux 3.14 compat: IO acct, global_page_state, etc
2017-09-19 661907e6 Linux 4.14 compat: IO acct, global_page_state, etc

The config infrastructure provided here resolves these issues going back
to the original API change in v3.14 and is robust against further Linux
changes in this area.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes #7170
2018-02-23 08:50:06 -08:00
Chris Williamson d99a015343 OpenZFS 7431 - ZFS Channel Programs
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Don Brady <don.brady@delphix.com>
Ported-by: John Kennedy <john.kennedy@delphix.com>

OpenZFS-issue: https://www.illumos.org/issues/7431
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533

Porting Notes:
* The CLI long option arguments for '-t' and '-m' don't parse on linux
* Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc
* Lua implementation is built as its own module (zlua.ko)
* Lua headers consumed directly by zfs code moved to 'include/sys/lua/'
* There is no native setjmp/longjump available in stock Linux kernel.
  Brought over implementations from illumos and FreeBSD
* The get_temporary_prop() was adapted due to VFS platform differences
* Use of inline functions in lua parser to reduce stack usage per C call
* Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
2018-02-08 15:28:18 -08:00
Brian Behlendorf cd0a89ded9 Extend zloop.sh for automated testing
In order to debug issues encountered by ztest during automated
testing it's important that as much debugging information as
possible by dumped at the time of the failure.  The following
changes extend the zloop.sh script in order to make it easier
to integrate with buildbot.

* Add the `-m <maximum cores>` option to zloop.sh to place a
  limit of the number of core dumps generated.  By default, the
  existing behavior is maintained and no limit is set.

* Add the `-l` option to create a 'ztest.core.N' symlink in the
  current directory to the core directory. This functionality
  is provided primarily for buildbot which expects log files to
  have well known names.

* Rename 'ztest.ddt' to 'ztest.zdb' and extend it to dump
  additional basic information on failure for latter analysis.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6999
2018-01-25 13:42:34 -08:00
Brian Behlendorf 8fb1ede146 Extend deadman logic
The intent of this patch is extend the existing deadman code
such that it's flexible enough to be used by both ztest and
on production systems.  The proposed changes include:

* Added a new `zfs_deadman_failmode` module option which is
  used to dynamically control the behavior of the deadman.  It's
  loosely modeled after, but independant from, the pool failmode
  property.  It can be set to wait, continue, or panic.

    * wait     - Wait for the "hung" I/O (default)
    * continue - Attempt to recover from a "hung" I/O
    * panic    - Panic the system

* Added a new `zfs_deadman_ziotime_ms` module option which is
  analogous to `zfs_deadman_synctime_ms` except instead of
  applying to a pool TXG sync it applies to zio_wait().  A
  default value of 300s is used to define a "hung" zio.

* The ztest deadman thread has been re-enabled by default,
  aligned with the upstream OpenZFS code, and then extended
  to terminate the process when it takes significantly longer
  to complete than expected.

* The -G option was added to ztest to print the internal debug
  log when a fatal error is encountered.  This same option was
  previously added to zdb in commit fa603f82.  Update zloop.sh
  to unconditionally pass -G to obtain additional debugging.

* The FM_EREPORT_ZFS_DELAY event which was previously posted
  when the deadman detect a "hung" pool has been replaced by
  a new dedicated FM_EREPORT_ZFS_DEADMAN event.

* The proposed recovery logic attempts to restart a "hung"
  zio by calling zio_interrupt() on any outstanding leaf zios.
  We may want to further restrict this to zios in either the
  ZIO_STAGE_VDEV_IO_START or ZIO_STAGE_VDEV_IO_DONE stages.
  Calling zio_interrupt() is expected to only be useful for
  cases when an IO has been submitted to the physical device
  but for some reasonable the completion callback hasn't been
  called by the lower layers.  This shouldn't be possible but
  has been observed and may be caused by kernel/driver bugs.

* The 'zfs_deadman_synctime_ms' default value was reduced from
  1000s to 600s.

* Depending on how ztest fails there may be no cache file to
  move.  This should not be considered fatal, collect the logs
  which are available and carry on.

* Add deadman test cases for spa_deadman() and zio_wait().

* Increase default zfs_deadman_checktime_ms to 60s.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6999
2018-01-25 13:40:38 -08:00
Brian Behlendorf 3da3488e63
Fix shellcheck v0.4.6 warnings
Resolve new warnings reported after upgrading to shellcheck
version 0.4.6.  This patch contains no functional changes.

* egrep is non-standard and deprecated. Use grep -E instead. [SC2196]
* Check exit code directly with e.g. 'if mycmd;', not indirectly
  with $?.  [SC2181]  Suppressed.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7040
2018-01-17 10:17:16 -08:00
Brian Behlendorf e1a0850c35
Force ztest to always use /dev/urandom
For ztest, which is solely for testing, using a pseudo random
is entirely reasonable.  Using /dev/urandom ensures the system
entropy pool doesn't get depleted thus stalling the testing.
This is a particular problem when testing in VMs.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7017 
Closes #7036
2018-01-12 09:36:26 -08:00
Brian Behlendorf fed90353d7
Support -fsanitize=address with --enable-asan
When --enable-asan is provided to configure then build all user
space components with fsanitize=address.  For kernel support
use the Linux KASAN feature instead.

https://github.com/google/sanitizers/wiki/AddressSanitizer

When using gcc version 4.8 any test case which intentionally
generates a core dump will fail when using --enable-asan.
The default behavior is to disable core dumps and only newer
versions allow this behavior to be controled at run time with
the ASAN_OPTIONS environment variable.

Additionally, this patch includes some build system cleanup.

* Rules.am updated to set the minimum AM_CFLAGS, AM_CPPFLAGS,
  and AM_LDFLAGS.  Any additional flags should be added on a
  per-Makefile basic.  The --enable-debug and --enable-asan
  options apply to all user space binaries and libraries.

* Compiler checks consolidated in always-compiler-options.m4
  and renamed for consistency.

* -fstack-check compiler flag was removed, this functionality
  is provided by asan when configured with --enable-asan.

* Split DEBUG_CFLAGS in to DEBUG_CFLAGS, DEBUG_CPPFLAGS, and
  DEBUG_LDFLAGS.

* Moved default kernel build flags in to module/Makefile.in and
  split in to ZFS_MODULE_CFLAGS and ZFS_MODULE_CPPFLAGS.  These
  flags are set with the standard ccflags-y kbuild mechanism.

* -Wframe-larger-than checks applied only to binaries or
  libraries which include source files which are built in
  both user space and kernel space.  This restriction is
  relaxed for user space only utilities.

* -Wno-unused-but-set-variable applied only to libzfs and
  libzpool.  The remaining warnings are the result of an
  ASSERT using a variable when is always declared.

* -D_POSIX_PTHREAD_SEMANTICS and -D__EXTENSIONS__ dropped
  because they are Solaris specific and thus not needed.

* Ensure $GDB is defined as gdb by default in zloop.sh.

Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7027
2018-01-10 10:49:27 -08:00
Dominik Hassler 2e7c1bb35a OpenZFS 8794 - cstyle generates warnings with recent perl
Authored by: Dominik Hassler <hadfl@omniosce.org>
Reviewed by: Andy Fiddaman <andy@omniosce.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8794
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/578f67364c
Closes #6973
2017-12-19 12:54:08 -08:00
David Qian f6940bb9ea Enable QAT support in zfs-dkms RPM
Enable QAT accelerated gzip compression in zfs-dkms RPM package when
environment variant ICP_ROOT is set to QAT drive source code folder
and QAT hardware presence.  Otherwise, use default gzip compression.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: David Qian <david.qian@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6932
2017-12-14 12:44:27 -05:00
Prakash Surya 1ce23dcaff OpenZFS 8585 - improve batching done in zil_commit()
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Prakash Surya <prakash.surya@delphix.com>

Problem
=======

The current implementation of zil_commit() can introduce significant
latency, beyond what is inherent due to the latency of the underlying
storage. The additional latency comes from two main problems:

 1. When there's outstanding ZIL blocks being written (i.e. there's
    already a "writer thread" in progress), then any new calls to
    zil_commit() will block waiting for the currently oustanding ZIL
    blocks to complete. The blocks written for each "writer thread" is
    coined a "batch", and there can only ever be a single "batch" being
    written at a time. When a batch is being written, any new ZIL
    transactions will have to wait for the next batch to be written,
    which won't occur until the current batch finishes.

    As a result, the underlying storage may not be used as efficiently
    as possible. While "new" threads enter zil_commit() and are blocked
    waiting for the next batch, it's possible that the underlying
    storage isn't fully utilized by the current batch of ZIL blocks. In
    that case, it'd be better to allow these new threads to generate
    (and issue) a new ZIL block, such that it could be serviced by the
    underlying storage concurrently with the other ZIL blocks that are
    being serviced.

 2. Any call to zil_commit() must wait for all ZIL blocks in its "batch"
    to complete, prior to zil_commit() returning. The size of any given
    batch is proportional to the number of ZIL transaction in the queue
    at the time that the batch starts processing the queue; which
    doesn't occur until the previous batch completes. Thus, if there's a
    lot of transactions in the queue, the batch could be composed of
    many ZIL blocks, and each call to zil_commit() will have to wait for
    all of these writes to complete (even if the thread calling
    zil_commit() only cared about one of the transactions in the batch).

To further complicate the situation, these two issues result in the
following side effect:

 3. If a given batch takes longer to complete than normal, this results
    in larger batch sizes, which then take longer to complete and
    further drive up the latency of zil_commit(). This can occur for a
    number of reasons, including (but not limited to): transient changes
    in the workload, and storage latency irregularites.

Solution
========

The solution attempted by this change has the following goals:

 1. no on-disk changes; maintain current on-disk format.
 2. modify the "batch size" to be equal to the "ZIL block size".
 3. allow new batches to be generated and issued to disk, while there's
    already batches being serviced by the disk.
 4. allow zil_commit() to wait for as few ZIL blocks as possible.
 5. use as few ZIL blocks as possible, for the same amount of ZIL
    transactions, without introducing significant latency to any
    individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks.

In theory, with these goals met, the new allgorithm will allow the
following improvements:

 1. new ZIL blocks can be generated and issued, while there's already
    oustanding ZIL blocks being serviced by the storage.
 2. the latency of zil_commit() should be proportional to the underlying
    storage latency, rather than the incoming synchronous workload.

Porting Notes
=============

Due to the changes made in commit 119a394ab0, the lifetime of an itx
structure differs than in OpenZFS. Specifically, the itx structure is
kept around until the data associated with the itx is considered to be
safe on disk; this is so that the itx's callback can be called after the
data is committed to stable storage. Since OpenZFS doesn't have this itx
callback mechanism, it's able to destroy the itx structure immediately
after the itx is committed to an lwb (before the lwb is written to
disk).

To support this difference, and to ensure the itx's callbacks can still
be called after the itx's data is on disk, a few changes had to be made:

  * A list of itxs was added to the lwb structure. This list contains
    all of the itxs that have been committed to the lwb, such that the
    callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(),
    after the data for the itxs is committed to disk.

  * A list of itxs was added on the stack of the zil_process_commit_list()
    function; the "nolwb_itxs" list. In some circumstances, an itx may
    not be committed to an lwb (e.g. if allocating the "next" ZIL block
    on disk fails), so this list is used to keep track of which itxs
    fall into this state, such that their callbacks can be called after
    the ZIL's writer pipeline is "stalled".

  * The logic to actually call the itx's callback was moved into the
    zil_itx_destroy() function. Since all consumers of zil_itx_destroy()
    were effectively performing the same logic (i.e. if callback is
    non-null, call the callback), it seemed like useful code cleanup to
    consolidate this logic into a single function.

Additionally, the existing Linux tracepoint infrastructure dealing with
the ZIL's probes and structures had to be updated to reflect these code
changes. Specifically:

  * The "zil__cw1" and "zil__cw2" probes were removed, so they had to be
    removed from "trace_zil.h" as well.

  * Some of the zilog structure's fields were removed, which affected
    the tracepoint definitions of the structure.

  * New tracepoints had to be added for the following 3 new probes:
      * zil__process__commit__itx
      * zil__process__normal__itx
      * zil__commit__io__error

OpenZFS-issue: https://www.illumos.org/issues/8585
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3a
Closes #6566
2017-12-05 09:39:16 -08:00
LOLi 271955da3e Fix zfs-tests.sh single test functionality
Without any tag specified into the runtime-generated runfile the
test-runner will not execute the test provided from the command line:
fix this by adding tag information to the custom runfile.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6826
2017-11-07 14:55:31 -08:00
Giuseppe Di Natale 9a810efb02 Allow test-runner to filter test groups by tag
Enable test-runner to accept a list of tags to identify
which test groups the user wishes to run.

Also allow test-runner to perform multiple iterations
of a test run.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6788
2017-11-03 09:53:32 -07:00
Giuseppe Di Natale 69b229bd60 commitcheck: Multiple OpenZFS ports in commit
Allow commitcheck.sh to handle multiple OpenZFS ports in
a single commit. This is useful in the cases when a change
upstream has bug fixes and it makes sense to port them with
the original patch.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6780
2017-10-26 10:23:58 -07:00
Giuseppe Di Natale 8dcaf243d7 Add Coverity defect fix commit checker support
Enable commitcheck.sh to test if a commit message is
in the expected format for a coverity defect fix.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6777
2017-10-26 10:17:00 -07:00
Brian Behlendorf aea899a6fa Increase default zloop.sh vdev size
The default 128M vdev size used by zloop.sh isn't always large
enough and can result in ENOSPC failures which suspend the pool.
Increase the default size to 512M and provide a -s option which
can be used to specify an alternate size.

This does increase the free space requirements to run zloop.sh.
However, since the vdevs are sparse 4x the space is not required.

Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6758
2017-10-13 12:39:39 -07:00
Tom Caputi 4807c0badb Encryption patch follow-up
* PBKDF2 implementation changed to OpenSSL implementation.

* HKDF implementation moved to its own file and tests
  added to ensure correctness.

* Removed libzfs's now unnecessary dependency on libzpool
  and libicp.

* Ztest can now create and test encrypted datasets. This is
  currently disabled until issue #6526 is resolved, but
  otherwise functions as advertised.

* Several small bug fixes discovered after enabling ztest
  to run on encrypted datasets.

* Fixed coverity defects added by the encryption patch.

* Updated man pages for encrypted send / receive behavior.

* Fixed a bug where encrypted datasets could receive
  DRR_WRITE_EMBEDDED records.

* Minor code cleanups / consolidation.

Signed-off-by: Tom Caputi <tcaputi@datto.com>
2017-10-11 16:54:48 -04:00
LOLi 3fd3e56cfd Fix some ZFS Test Suite issues
* Add 'zfs bookmark' coverage (zfs_bookmark_cliargs)

 * Add OpenZFS 8166 coverage (zpool_scrub_offline_device)

 * Fix "busy" zfs_mount_remount failures

 * Fix bootfs_003_pos, bootfs_004_neg, zdb_005_pos local cleanup

 * Update usage of $KEEP variable, add get_all_pools() function

 * Enable history_008_pos and rsend_019_pos (non-32bit builders)

 * Enable zfs_copies_005_neg, update local cleanup

 * Fix zfs_send_007_pos (large_dnode + OpenZFS 8199)

 * Fix rollback_003_pos (use dataset name, not mountpoint, to unmount)

 * Update default_raidz_setup() to work properly with more than 3 disks

 * Use $TEST_BASE_DIR instead of hardcoded (/var)/tmp for file VDEVs

 * Update usage of /dev/random to /dev/urandom

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Issue #6086 
Closes #5658 
Closes #6143 
Closes #6421 
Closes #6627 
Closes #6632
2017-09-25 10:32:34 -07:00
Don Brady 5df5d06a8d Cleanup zloop working directory after each pass
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: John Kennedy <jwk404@gmail.com>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Issue #6595 
Closes #6663
2017-09-21 10:17:56 -07:00
Giuseppe Di Natale ea49beba66 Correct shellcheck errors
The ZFS buildbot moved to using Ubuntu 17.04 for the
STYLE builder which has a newer version of shellcheck.
Correct the new issues it discovers.

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6647
2017-09-18 14:23:09 -07:00