folkslinux
/
zfs
mirror of https://github.com/openzfs/zfs.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
zfs/configure.ac

91 lines
2.3 KiB
Plaintext
Raw Normal View History

Go through and add a header with the proper UCRL number. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@114 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-05-26 12:38:26 +08:00
/*
* This file is part of the SPL: Solaris Porting Layer.
*
* Copyright (c) 2008 Lawrence Livermore National Security, LLC.
* Produced at Lawrence Livermore National Laboratory
* Written by:
* Brian Behlendorf <behlendorf1@llnl.gov>,
* Herb Wartens <wartens2@llnl.gov>,
* Jim Garlick <garlick@llnl.gov>
* UCRL-CODE-235197
*
* This is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
Initial commit. All spl source written up to this point wrapped in an initial reasonable autoconf style build system. This does not yet build but the configure system does appear to work properly and integrate with the kernel. Hopefully the next commit gets us back to a buildable version we can run the test suite against. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@1 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-02-27 04:36:04 +08:00
AC_INIT
Build system cleanup 1) Undefine non-unique entries in spl_config.h 2) Minor Makefile cleanup 3) Don't use includedir for proper kernel header install
2009-03-11 01:57:52 +08:00
AC_LANG(C)
Include META file support. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@181 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-11-27 01:01:45 +08:00
SPL_AC_META
* : Add autogen.sh products. * configure.ac : Use AC_CONFIG_AUX_DIR to put autoconf products in ./auotconf. * autogen.sh : Use --copy to avoid symlinks, remove error redirection, run aclocal before libtoolize. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@180 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-11-25 07:49:18 +08:00
AC_CONFIG_AUX_DIR([config])
Initial commit. All spl source written up to this point wrapped in an initial reasonable autoconf style build system. This does not yet build but the configure system does appear to work properly and integrate with the kernel. Hopefully the next commit gets us back to a buildable version we can run the test suite against. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@1 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-02-27 04:36:04 +08:00
AC_CANONICAL_SYSTEM
Prefix all META_* #defines with SPL to prevent colisions which include our spl_config.h. Dependent packages may do this to leverage the autoconf check we have already run aganst the kernel.
2008-11-27 05:09:37 +08:00
AM_INIT_AUTOMAKE([$SPL_META_NAME], [$SPL_META_VERSION])
Breaking the world for a little bit. If anyone is going to continue working on this branch for the next few days I suggested you work off of the 0.3.1 tag. The following changes are fairly extensive and are designed to make the SPL compatible with all kernels in the range of 2.6.18-2.6.25. There were 13 relevant API changes between these releases and I have added the needed autoconf tests to check for them. However, this has not all been tested extensively. I'll sort of the breakage on Fedora Core 9 and RHEL5 this week. SPL_AC_TYPE_UINTPTR_T SPL_AC_TYPE_KMEM_CACHE_T SPL_AC_KMEM_CACHE_DESTROY_INT SPL_AC_ATOMIC_PANIC_NOTIFIER SPL_AC_3ARGS_INIT_WORK SPL_AC_2ARGS_REGISTER_SYSCTL SPL_AC_KMEM_CACHE_T SPL_AC_KMEM_CACHE_CREATE_DTOR SPL_AC_3ARG_KMEM_CACHE_CREATE_CTOR SPL_AC_SET_SHRINKER SPL_AC_PATH_IN_NAMEIDATA SPL_AC_TASK_CURR SPL_AC_CTL_UNNUMBERED git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@119 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-06-03 01:28:49 +08:00
AC_CONFIG_HEADERS([spl_config.h])
* : Add autogen.sh products. * configure.ac : Use AC_CONFIG_AUX_DIR to put autoconf products in ./auotconf. * autogen.sh : Use --copy to avoid symlinks, remove error redirection, run aclocal before libtoolize. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@180 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-11-25 07:49:18 +08:00
AM_MAINTAINER_MODE
Initial commit. All spl source written up to this point wrapped in an initial reasonable autoconf style build system. This does not yet build but the configure system does appear to work properly and integrate with the kernel. Hopefully the next commit gets us back to a buildable version we can run the test suite against. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@1 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-02-27 04:36:04 +08:00
AC_PROG_INSTALL
AC_PROG_CC
User space build fixes: - Add list handling compatibility library - Drop uu_* list handling in favor of local list implementation - libtoolize - generic makefile cleanup git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@3 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-02-27 07:20:41 +08:00
AC_PROG_LIBTOOL
Initial commit. All spl source written up to this point wrapped in an initial reasonable autoconf style build system. This does not yet build but the configure system does appear to work properly and integrate with the kernel. Hopefully the next commit gets us back to a buildable version we can run the test suite against. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@1 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-02-27 04:36:04 +08:00
- Properly fix the debug support for all the ASSERT's, VERIFIES, etc can be compiled out when doing performance runs. - Bite the bullet and fully autoconfize the debug options in the configure time parameters. By default all the debug support is disable in the core SPL build, but available to modules which enable it when building against the SPL. To enable particular SPL debug support use the follow configure options: --enable-debug Internal ASSERTs --enable-debug-kmem Detailed memory accounting --enable-debug-mutex Detailed mutex tracking --enable-debug_kstat Kstat info exported to /proc --enable-debug-callb Additional callb debug git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@111 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-05-19 10:49:12 +08:00
SPL_AC_KERNEL
* include/sys/sunddi.h, modules/spl/spl-module.c : Removed default udev support from sunddi implementation because it uses GPL-only symbols. This support is optionally available for SPL consumers if they define HAVE_GPL_ONLY_SYMBOLS and license their module as GPL using the MODULE_LICENSE("GPL") macro. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@179 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-11-14 05:43:30 +08:00
SPL_AC_LICENSE
- Properly fix the debug support for all the ASSERT's, VERIFIES, etc can be compiled out when doing performance runs. - Bite the bullet and fully autoconfize the debug options in the configure time parameters. By default all the debug support is disable in the core SPL build, but available to modules which enable it when building against the SPL. To enable particular SPL debug support use the follow configure options: --enable-debug Internal ASSERTs --enable-debug-kmem Detailed memory accounting --enable-debug-mutex Detailed mutex tracking --enable-debug_kstat Kstat info exported to /proc --enable-debug-callb Additional callb debug git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@111 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-05-19 10:49:12 +08:00
SPL_AC_DEBUG
SPL_AC_DEBUG_KMEM
SPL_AC_DEBUG_MUTEX
SPL_AC_DEBUG_KSTAT
SPL_AC_DEBUG_CALLB
Breaking the world for a little bit. If anyone is going to continue working on this branch for the next few days I suggested you work off of the 0.3.1 tag. The following changes are fairly extensive and are designed to make the SPL compatible with all kernels in the range of 2.6.18-2.6.25. There were 13 relevant API changes between these releases and I have added the needed autoconf tests to check for them. However, this has not all been tested extensively. I'll sort of the breakage on Fedora Core 9 and RHEL5 this week. SPL_AC_TYPE_UINTPTR_T SPL_AC_TYPE_KMEM_CACHE_T SPL_AC_KMEM_CACHE_DESTROY_INT SPL_AC_ATOMIC_PANIC_NOTIFIER SPL_AC_3ARGS_INIT_WORK SPL_AC_2ARGS_REGISTER_SYSCTL SPL_AC_KMEM_CACHE_T SPL_AC_KMEM_CACHE_CREATE_DTOR SPL_AC_3ARG_KMEM_CACHE_CREATE_CTOR SPL_AC_SET_SHRINKER SPL_AC_PATH_IN_NAMEIDATA SPL_AC_TASK_CURR SPL_AC_CTL_UNNUMBERED git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@119 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-06-03 01:28:49 +08:00
SPL_AC_TYPE_UINTPTR_T
Add a SPL_AC_TYPE_ATOMIC64_T test to configure for systems which do already supprt atomic64_t types. * spl-07-kmem-cleanup.patch This moves all the debugging code from sys/kmem.h to spl-kmem.c, because the huge macros were hard to debug and were bloating functions that allocated memory. I also fixed some other minor problems, including 32-bit fixes and a reported memory leak which was just due to using the wrong free function. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@163 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-11-04 05:06:04 +08:00
SPL_AC_TYPE_ATOMIC64_T
Breaking the world for a little bit. If anyone is going to continue working on this branch for the next few days I suggested you work off of the 0.3.1 tag. The following changes are fairly extensive and are designed to make the SPL compatible with all kernels in the range of 2.6.18-2.6.25. There were 13 relevant API changes between these releases and I have added the needed autoconf tests to check for them. However, this has not all been tested extensively. I'll sort of the breakage on Fedora Core 9 and RHEL5 this week. SPL_AC_TYPE_UINTPTR_T SPL_AC_TYPE_KMEM_CACHE_T SPL_AC_KMEM_CACHE_DESTROY_INT SPL_AC_ATOMIC_PANIC_NOTIFIER SPL_AC_3ARGS_INIT_WORK SPL_AC_2ARGS_REGISTER_SYSCTL SPL_AC_KMEM_CACHE_T SPL_AC_KMEM_CACHE_CREATE_DTOR SPL_AC_3ARG_KMEM_CACHE_CREATE_CTOR SPL_AC_SET_SHRINKER SPL_AC_PATH_IN_NAMEIDATA SPL_AC_TASK_CURR SPL_AC_CTL_UNNUMBERED git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@119 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-06-03 01:28:49 +08:00
SPL_AC_3ARGS_INIT_WORK
SPL_AC_2ARGS_REGISTER_SYSCTL
SPL_AC_SET_SHRINKER
SPL_AC_PATH_IN_NAMEIDATA
SPL_AC_TASK_CURR
SPL_AC_CTL_UNNUMBERED
Pull in fls64 compat changes from spl-00-rhel4-compat.patch, to allow greater compatibility with kernels pre 2.6.16. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@149 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-08-06 12:52:39 +08:00
SPL_AC_FLS64
Add class / device portability code. Two autoconf tests were added to cover the 3 possible APIs from 2.6.9 to 2.6.26. We attempt to use the newest interfaces and if not available fallback to the oldest. This a rework of some changes proposed by Ricardo for RHEL4. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@150 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-08-10 11:50:36 +08:00
SPL_AC_DEVICE_CREATE
Added SPL_AC_5ARGS_DEVICE_CREATE autoconf configure check As of 2.6.27 kernels the device_create() API changed to include a private data argument. This check detects which version of device_create() function the kernel has and properly defines spl_device_create() to use the correct prototype.
2009-03-14 04:38:43 +08:00
SPL_AC_5ARGS_DEVICE_CREATE
Add class / device portability code. Two autoconf tests were added to cover the 3 possible APIs from 2.6.9 to 2.6.26. We attempt to use the newest interfaces and if not available fallback to the oldest. This a rework of some changes proposed by Ricardo for RHEL4. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@150 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-08-10 11:50:36 +08:00
SPL_AC_CLASS_DEVICE_CREATE
Pull in timespec, list, and type compat changes to support building against a wider range of kernels. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@152 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-08-12 01:20:11 +08:00
SPL_AC_SET_NORMALIZED_TIMESPEC_EXPORT
SPL_AC_SET_NORMALIZED_TIMESPEC_INLINE
SPL_AC_TIMESPEC_SUB
Commit bulk of remaining 2.6.9 and 2.6.26 compat changes. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@155 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-08-12 06:13:47 +08:00
SPL_AC_INIT_UTSNAME
More 2.6.26 compat changes git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@153 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-08-12 01:56:40 +08:00
SPL_AC_FDTABLE_HEADER
Commit bulk of remaining 2.6.9 and 2.6.26 compat changes. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@155 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-08-12 06:13:47 +08:00
SPL_AC_FILES_FDTABLE
Include linux/uaccess.h compat changes. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@154 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-08-12 03:10:14 +08:00
SPL_AC_UACCESS_HEADER
Commit bulk of remaining 2.6.9 and 2.6.26 compat changes. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@155 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-08-12 06:13:47 +08:00
SPL_AC_KMALLOC_NODE
SPL_AC_MONOTONIC_CLOCK
SPL_AC_INODE_I_MUTEX
Pull in initial 32-bit support patches. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@156 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-08-12 06:42:04 +08:00
SPL_AC_DIV64_64
2.6.27+ portability changes - Added SPL_AC_3ARGS_ON_EACH_CPU configure check to determine if the older 4 argument version of on_each_cpu() should be used or the new 3 argument version. The retry argument was dropped in the new API which was never used anyway. - Updated work queue compatibility wrappers. The old way this worked was to pass a data point when initialized the workqueue. The new API assumed the work item is embedding in a structure and we us container_of() to find that data pointer. - Updated skc->skc_flags to be an unsigned long which is now type checked in the bit operations. This silences the warnings. - Updated autogen products and splat tests accordingly
2009-02-03 07:12:30 +08:00
SPL_AC_3ARGS_ON_EACH_CPU
Linux VM Integration Cleanup Remove all instances of functions being reimplemented in the SPL. When the prototypes are available in the linux headers but the function address itself is not exported use kallsyms_lookup_name() to find the address. The function name itself can them become a define which calls a function pointer. This is preferable to reimplementing the function in the SPL because it ensures we get the correct version of the function for the running kernel. This is actually pretty safe because the prototype is defined in the headers so we know we are calling the function properly. This patch also includes a rhel5 kernel patch we exports the needed symbols so we don't need to use kallsyms_lookup_name(). There are autoconf checks to detect if the symbol is exported and if so to use it directly. We should add patches for stock upstream kernels as needed if for no other reason than so we can easily track which additional symbols we needed exported. Those patches can also be used by anyone willing to rebuild their kernel, but this should not be a requirement. The rhel5 version of the export-symbols patch has been applied to the chaos kernel. Additional fixes: 1) Implement vmem_size() function using get_vmalloc_info() 2) SPL_CHECK_SYMBOL_EXPORT macro updated to use $LINUX_OBJ instead of $LINUX because Module.symvers is a build product. When $LINUX_OBJ != $LINUX we will not properly detect exported symbols. 3) SPL_LINUX_COMPILE_IFELSE macro updated to add include2 and $LINUX/include search paths to allow proper compilation when the kernel target build directory is not the source directory.
2009-02-26 05:20:40 +08:00
SPL_AC_KALLSYMS_LOOKUP_NAME
SPL_AC_GET_VMALLOC_INFO
Linux VM integration / device special files Support added to provide reasonable values for the global Solaris VM variables: minfree, desfree, lotsfree, needfree. These values are set to the sum of their per-zone linux counterparts which should be close enough for Solaris consumers. When a non-GPL app links against the SPL we cannot use the udev interfaces, which means non of the device special files are created. Because of this I had added a poor mans udev which cause the SPL to invoke an upcall and create the basic devices when a minor is registered. When a minor is unregistered we use the vnode interface to unlink the special file.
2009-02-05 07:15:41 +08:00
SPL_AC_FIRST_ONLINE_PGDAT
SPL_AC_NEXT_ONLINE_PGDAT
SPL_AC_NEXT_ZONE
Additional Linux VM integration Added support for Solaris swapfs_minfree, and swapfs_reserve tunables. In additional availrmem is now available and return a reasonable value which is reasonably analogous to the Solaris meaning. On linux we return the sun of free and inactive pages since these are all easily reclaimable. All tunables are available in /proc/sys/kernel/spl/vm/* and they may need a little adjusting once we observe the real behavior. Some of the defaults are mapped to similar linux counterparts, others are straight from the OpenSolaris defaults.
2009-02-06 04:26:34 +08:00
SPL_AC_GET_ZONE_COUNTS
Initial commit. All spl source written up to this point wrapped in an initial reasonable autoconf style build system. This does not yet build but the configure system does appear to work properly and integrate with the kernel. Hopefully the next commit gets us back to a buildable version we can run the test suite against. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@1 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-02-27 04:36:04 +08:00
Build system update - Added default build flags: -Wall -Wstrict-prototypes -Werror -Wshadow - Added missing Makefile's for include/ subdirectories.
2009-02-13 06:45:22 +08:00
AC_CONFIG_FILES([
Makefile
lib/Makefile
cmd/Makefile
module/Makefile
module/spl/Makefile
module/splat/Makefile
include/Makefile
scripts/Makefile
Build system and packaging (RPM support) An update to the build system to properly support all commonly used Makefile targets these include: make all # Build everything make install # Install everything make clean # Clean up build products make distclean # Clean up everything make dist # Create package tarball make srpm # Create package source RPM make rpm # Create package binary RPMs make tags # Create ctags and etags for everything Extra care was taken to ensure that the source RPMs are fully rebuildable against Fedora/RHEL/Chaos kernels. To build binary RPMs from the source RPM for your system simply run: rpmbuild --rebuild spl-x.y.z-1.src.rpm This will produce two binary RPMs with correct 'requires' dependencies for your kernel. One will contain all spl modules and support utilities, the other is a devel package for compiling additional kernel modules which are dependant on the spl. spl-x.y.z-1_<kernel version>.x86_64.rpm spl-devel-x.y.2-1_<kernel version>.x86_64.rpm
2009-03-06 01:08:07 +08:00
spl.spec
Build system update - Added default build flags: -Wall -Wstrict-prototypes -Werror -Wshadow - Added missing Makefile's for include/ subdirectories.
2009-02-13 06:45:22 +08:00
])
Initial commit. All spl source written up to this point wrapped in an initial reasonable autoconf style build system. This does not yet build but the configure system does appear to work properly and integrate with the kernel. Hopefully the next commit gets us back to a buildable version we can run the test suite against. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@1 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-02-27 04:36:04 +08:00
AC_OUTPUT