make pub_use_of_private_extern_crate show up in cargo's future breakage reports
This has been a lint for many years.
However, turns out that outright removing it right now would lead to [tons of crater regressions](https://github.com/rust-lang/rust/pull/127656#issuecomment-2233288534) due to crates depending on an ancient version of `bitflags`. So for now this PR just makes this future-compat lint show up in cargo's reports, so people are warned when they use a dependency that is affected by this.
r? `@petrochenkov`
Fix ambiguous cases of multiple & in elided self lifetimes
This change proposes simpler rules to identify the lifetime on `self` parameters which may be used to elide a return type lifetime.
## The old rules
(copied from [this comment](https://github.com/rust-lang/rust/pull/117967#discussion_r1420554242))
Most of the code can be found in [late.rs](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html) and acts on AST types. The function [resolve_fn_params](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html#2006), in the success case, returns a single lifetime which can be used to elide the lifetime of return types.
Here's how:
* If the first parameter is called self then we search that parameter using "`self` search rules", below
* If no unique applicable lifetime was found, search all other parameters using "regular parameter search rules", below
(In practice the code does extra work to assemble good diagnostic information, so it's not quite laid out like the above.)
### `self` search rules
This is primarily handled in [find_lifetime_for_self](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html#2118) , and is described slightly [here](https://github.com/rust-lang/rust/issues/117715#issuecomment-1813115477) already. The code:
1. Recursively walks the type of the `self` parameter (there's some complexity about resolving various special cases, but it's essentially just walking the type as far as I can see)
2. Each time we find a reference anywhere in the type, if the **direct** referent is `Self` (either spelled `Self` or by some alias resolution which I don't fully understand), then we'll add that to a set of candidate lifetimes
3. If there's exactly one such unique lifetime candidate found, we return this lifetime.
### Regular parameter search rules
1. Find all the lifetimes in each parameter, including implicit, explicit etc.
2. If there's exactly one parameter containing lifetimes, and if that parameter contains exactly one (unique) lifetime, *and if we didn't find a `self` lifetime parameter already*, we'll return this lifetime.
## The new rules
There are no changes to the "regular parameter search rules" or to the overall flow, only to the `self` search rules which are now:
1. Recursively walks the type of the `self` parameter, searching for lifetimes of reference types whose referent **contains** `Self`.[^1]
2. Keep a record of:
* Whether 0, 1 or n unique lifetimes are found on references encountered during the walk
4. If no lifetime was found, we don't return a lifetime. (This means other parameters' lifetimes may be used for return type lifetime elision).
5. If there's one lifetime found, we return the lifetime.
6. If multiple lifetimes were found, we abort elision entirely (other parameters' lifetimes won't be used).
[^1]: this prevents us from considering lifetimes from inside of the self-type
## Examples that were accepted before and will now be rejected
```rust
fn a(self: &Box<&Self>) -> &u32
fn b(self: &Pin<&mut Self>) -> &String
fn c(self: &mut &Self) -> Option<&Self>
fn d(self: &mut &Box<Self>, arg: &usize) -> &usize // previously used the lt from arg
```
### Examples that change the elided lifetime
```rust
fn e(self: &mut Box<Self>, arg: &usize) -> &usize
// ^ new ^ previous
```
## Examples that were rejected before and will now be accepted
```rust
fn f(self: &Box<Self>) -> &u32
```
---
*edit: old PR description:*
```rust
struct Concrete(u32);
impl Concrete {
fn m(self: &Box<Self>) -> &u32 {
&self.0
}
}
```
resulted in a confusing error.
```rust
impl Concrete {
fn n(self: &Box<&Self>) -> &u32 {
&self.0
}
}
```
resulted in no error or warning, despite apparent ambiguity over the elided lifetime.
Fixes https://github.com/rust-lang/rust/issues/117715
cleanup: remove support for 3DNow! cpu features
In llvm/llvm-project@f0eb5587ce all support for 3DNow! intrinsics and instructions were removed. Per the commit message there, only AMD chips between 1998 and 2011 or so actually supported these instructions, and they were effectively replaced by SSE which was available on many more chips. I'd be very surprised if anyone had ever used these from Rust.
`@rustbot` label: +llvm-main
Remove `TrailingToken`.
It's used in `Parser::collect_tokens_trailing_token` to decide whether to capture a trailing token. But the callers actually know whether to capture a trailing token, so it's simpler for them to just pass in a bool.
Also, the `TrailingToken::Gt` case was weird, because it didn't result in a trailing token being captured. It could have been subsumed by the `TrailingToken::MaybeComma` case, and it effectively is in the new code.
r? `@petrochenkov`
It's used in `Parser::collect_tokens_trailing_token` to decide whether
to capture a trailing token. But the callers actually know whether to
capture a trailing token, so it's simpler for them to just pass in a
bool.
Also, the `TrailingToken::Gt` case was weird, because it didn't result
in a trailing token being captured. It could have been subsumed by the
`TrailingToken::MaybeComma` case, and it effectively is in the new code.
More accurate span for anonymous argument suggestion
Use smaller span for suggesting adding `_:` ahead of a type:
```
error: expected one of `(`, `...`, `..=`, `..`, `::`, `:`, `{`, or `|`, found `)`
--> $DIR/anon-params-denied-2018.rs:12:47
|
LL | fn foo_with_qualified_path(<Bar as T>::Baz);
| ^ expected one of 8 possible tokens
|
= note: anonymous parameters are removed in the 2018 edition (see RFC 1685)
help: explicitly ignore the parameter name
|
LL | fn foo_with_qualified_path(_: <Bar as T>::Baz);
| ++
```
More accurate span for type parameter suggestion
After:
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/impl-block-params-declared-in-wrong-spot-issue-113073.rs:3:10
|
LL | impl Foo<T: Default> for String {}
| ^^^^^^^^^^ associated item constraint not allowed here
|
help: declare the type parameter right after the `impl` keyword
|
LL - impl Foo<T: Default> for String {}
LL + impl<T: Default> Foo<T> for String {}
|
```
Before:
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/impl-block-params-declared-in-wrong-spot-issue-113073.rs:3:10
|
LL | impl Foo<T: Default> for String {}
| ^^^^^^^^^^ associated item constraint not allowed here
|
help: declare the type parameter right after the `impl` keyword
|
LL | impl<T: Default> Foo<T> for String {}
| ++++++++++++ ~
```
Accurate `use` rename suggestion span
When suggesting to rename an import with `as`, use a smaller span to render the suggestion with a better format:
```
error[E0252]: the name `baz` is defined multiple times
--> $DIR/issue-25396.rs:4:5
|
LL | use foo::baz;
| -------- previous import of the module `baz` here
LL | use bar::baz;
| ^^^^^^^^ `baz` reimported here
|
= note: `baz` must be defined only once in the type namespace of this module
help: you can use `as` to change the binding name of the import
|
LL | use bar::baz as other_baz;
| ++++++++++++
```
Fix associated item removal suggestion
We were previously telling people to write what was already there, instead of removal (treating it as a `help`). We now properly suggest to remove the code that needs to be removed.
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/E0229.rs:13:25
|
LL | fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
| ^^^^^^^ associated item constraint not allowed here
|
help: consider removing this associated item binding
|
LL - fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
LL + fn baz<I>(x: &<I as Foo>::A) {}
|
```
Some parser improvements
I was looking closely at attribute handling in the parser while debugging some issues relating to #124141, and found a few small improvements.
``@spastorino``
Fix precise capturing suggestion for hidden regions when we have APITs
Suggests to turn APITs into type parameters so they can be named in precise capturing syntax for hidden type lifetime errors. We also note that it may change the API.
This is currently done via a note *and* a suggestion, which feels a bit redundant, but I wasn't totally sure of a better alternative for the presentation.
Code is kind of a mess but there's a lot of cases to consider. Happy to iterate on this if you think the approach is too messy.
Based on #127619, only the last commit is relevant.
r? oli-obk
Tracking:
- https://github.com/rust-lang/rust/issues/123432
Use smaller span for suggesting adding `_:` ahead of a type:
```
error: expected one of `(`, `...`, `..=`, `..`, `::`, `:`, `{`, or `|`, found `)`
--> $DIR/anon-params-denied-2018.rs:12:47
|
LL | fn foo_with_qualified_path(<Bar as T>::Baz);
| ^ expected one of 8 possible tokens
|
= note: anonymous parameters are removed in the 2018 edition (see RFC 1685)
help: explicitly ignore the parameter name
|
LL | fn foo_with_qualified_path(_: <Bar as T>::Baz);
| ++
```
After:
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/impl-block-params-declared-in-wrong-spot-issue-113073.rs:3:10
|
LL | impl Foo<T: Default> for String {}
| ^^^^^^^^^^ associated item constraint not allowed here
|
help: declare the type parameter right after the `impl` keyword
|
LL - impl Foo<T: Default> for String {}
LL + impl<T: Default> Foo<T> for String {}
|
```
Before:
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/impl-block-params-declared-in-wrong-spot-issue-113073.rs:3:10
|
LL | impl Foo<T: Default> for String {}
| ^^^^^^^^^^ associated item constraint not allowed here
|
help: declare the type parameter right after the `impl` keyword
|
LL | impl<T: Default> Foo<T> for String {}
| ++++++++++++ ~
```
When suggesting to rename an import with `as`, use a smaller span to
render the suggestion with a better format:
```
error[E0252]: the name `baz` is defined multiple times
--> $DIR/issue-25396.rs:4:5
|
LL | use foo::baz;
| -------- previous import of the module `baz` here
LL | use bar::baz;
| ^^^^^^^^ `baz` reimported here
|
= note: `baz` must be defined only once in the type namespace of this module
help: you can use `as` to change the binding name of the import
|
LL | use bar::baz as other_baz;
| ++++++++++++
```
We were previously telling people to write what was already there, instead of removal.
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/E0229.rs:13:25
|
LL | fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
| ^^^^^^^ associated item constraint not allowed here
|
help: consider removing this associated item binding
|
LL - fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
LL + fn baz<I>(x: &<I as Foo>::A) {}
|
```
In llvm/llvm-project@f0eb5587ce all
support for 3DNow! intrinsics and instructions were removed. Per the commit message
there, only AMD chips between 1998 and 2011 or so actually supported
these instructions, and they were effectively replaced by SSE which was
available on many more chips. I'd be very surprised if anyone had ever
used these from Rust.
Remove invalid further restricting suggestion for type bound
This PR partially addresses #127555, it will remove the obvious error suggestion:
```console
| ^^^^ required by this bound in `<Baz as Foo>::bar`
help: consider further restricting this bound
|
12 | F: FnMut() + Send + std::marker::Send,
| +++++++++++++++++++
```
I may create another PR to get a better diagnostic for `impl has stricter requirements than trait` scenario.
Don't use implicit features in `Cargo.toml` in `compiler/`
Fixes compiler crates to stop using implicit features (https://github.com/rust-lang/cargo/issues/12826) which are denied in in edition 2024.
Solve a error `.clone()` suggestion when moving a mutable reference
If the moved value is a mut reference, it is used in a generic function and it's type is a generic param, suggest it can be reborrowed to avoid moving.
for example:
```rust
struct Y(u32);
// x's type is '& mut Y' and it is used in `fn generic<T>(x: T) {}`.
fn generic<T>(x: T) {}
```
fixes#127285
MIR building: Stop using `unpack!` for `BlockAnd<()>`
This is a subset of #127416, containing only the parts related to `BlockAnd<()>`.
The first patch removes the non-assigning form of the `unpack!` macro, because it is frustratingly inconsistent with the main form. We can replace it with an ordinary method that discards the `()` and returns the block.
The second patch then finds all of the remaining code that was using `unpack!` with `BlockAnd<()>`, and updates it to use that new method instead.
---
Changes since original review of #127416:
- Renamed `fn unpack_block` → `fn into_block`
- Removed `fn unpack_discard`, replacing it with `let _: BlockAnd<()> = ...` (2 occurrences)
- Tweaked `arm_end_blocks` to unpack earlier and build `Vec<BasicBlock>` instead of `Vec<BlockAnd<()>>`
Use ordinal number in argument error
Add an ordinal number to two argument errors ("unexpected" and "missing") for ease of understanding error.
```
error[E0061]: this function takes 3 arguments but 2 arguments were supplied
--> test.rs:11:5
|
11 | f(42, 'a');
| ^ --- 2nd argument of type `f32` is missing
|
(snip)
error[E0061]: this function takes 3 arguments but 4 arguments were supplied
--> test.rs:12:5
|
12 | f(42, 42, 1.0, 'a');
| ^ ----
| | |
| | unexpected 2nd argument of type `{integer}`
| help: remove the extra argument
```
To get an ordinal number, I copied `ordinalize` from other crate `rustc_resolve` because I think it is too much to link `rustc_resolve` for this small function. Please let me know if there is a better way.
Clean up more comments near use declarations
#125443 will reformat all use declarations in the repository. There are a few edge cases involving comments on use declarations that require care. This PR fixes them up so #125443 can go ahead with a simple `x fmt --all`. A follow-up to #126717.
r? ``@cuviper``
There are some comments describing multiple subsequent `use` items. When
the big `use` reformatting happens some of these `use` items will be
reordered, possibly moving them away from the comment. With this
additional level of formatting it's not really feasible to have comments
of this type. This commit removes them in various ways:
- merging separate `use` items when appropriate;
- inserting blank lines between the comment and the first `use` item;
- outright deletion (for comments that are relatively low-value);
- adding a separate "top-level" comment.
We also entirely skip formatting for four library files that contain
nothing but `pub use` re-exports, where reordering would be painful.
Invert infer `error_reporting` mod struture
Parallel change to #127493, which moves `rustc_infer::infer::error_reporting` to `rustc_infer::error_reporting::infer`. After this, we should just be able to merge this into `rustc_trait_selection::error_reporting::infer`, and pull down `TypeErrCtxt` into that crate. 👍
r? lcnr
Michael Goulet