mirror of https://github.com/rust-lang/rust.git
Auto merge of #116352 - Kobzol:rustc-driver-bolt, r=Mark-Simulacrum
Optimize `librustc_driver.so` with BOLT This PR optimizes `librustc_driver.so` on 64-bit Linux CI with BOLT. ### Code One thing that's not clear yet to me how to resolve is how to best pass a linker flag that we need for BOLT (the second commit). It is currently passed unconditionally, which is not a good idea. We somehow have to: 1) Only pass it when we actually plan to use BOLT. How to best do that? `config.toml` entry? Environment variable? CLI flag for bootstrap? BOLT optimization is done by `opt-dist`, therefore bootstrap doesn't know about it by default. 2) Only pass it to `librustc_driver.so` (see performance below). Some discussion of this flag already happened on [Zulip](https://rust-lang.zulipchat.com/#narrow/stream/326414-t-infra.2Fbootstrap/topic/Adding.20a.20one-off.20linker.20flag). ### Performance Latest perf. results can be found [here](https://github.com/rust-lang/rust/pull/102487#issuecomment-1743469053). Note that instruction counts are not very interesting here, there are only regressions on hello world programs. Probably caused by a larger C++ libstd (?). Summary: - ✔️ `-1.8%` mean improvement in cycle counts across many primary benchmarks. - ✔️ `-1.8%` mean Max-RSS improvement. - ✖️ 34 MiB (+48%) artifact size regression of `librustc_driver.so`. - This is caused by building `librustc_driver.so` with relocations (which are required for BOLT). Hopefully, it will be [fixed](https://discourse.llvm.org/t/bolt-rfc-a-new-mode-to-rewrite-entire-binary/68674) in the future with BOLT improvements, but now trying to reduce this size increase is [tricky](https://github.com/rust-lang/rust/pull/114649). - Note that the size of this file was recently reduced in https://github.com/rust-lang/rust/pull/115554 by pretty much the same amount (33 MiB). So the size after this PR is basically the same as it was for the last ~year. - ✖️ 1.4 MiB (+53%) artifact size regression of `rustc`. - This is annoying and pretty much unnecessary. It is caused by the way relocations are currently applied in this PR, because they are applied both to `librustc_driver.so` (where they are needed) and for `rustc` (where they aren't needed), since both are built with a single cargo invocation. We might need e.g. some tricks in the bootstrap `rustc` shim to only apply the relocation flag for the shared library and not for `rustc`. ### CI time CI (try build) got slower by ~5 minutes, which is fine, IMO. It can be further reduced by running LLVM and `librustc_driver` BOLT profile gathering at the same time (now they are gathered separately for LLVM and `librustc_driver`). r? `@Mark-Simulacrum` Also CC `@onur-ozkan,` primarily for the bootstrap linker flag issue.
This commit is contained in:
bors
commit
c543b6f351
|
|
@ -193,6 +193,12 @@ fn main() {
|
|||
eprintln!("{prefix} libdir: {libdir:?}");
|
||||
}
|
||||
|
||||
if env::var_os("RUSTC_BOLT_LINK_FLAGS").is_some() {
|
||||
if let Some("rustc_driver") = crate_name {
|
||||
cmd.arg("-Clink-args=-Wl,-q");
|
||||
}
|
||||
}
|
||||
|
||||
let start = Instant::now();
|
||||
let (child, status) = {
|
||||
let errmsg = format!("\nFailed to run:\n{cmd:?}\n-------------");
|
||||
|
|
|
|||
|
|
@ -906,6 +906,11 @@ impl Step for Rustc {
|
|||
cargo.arg("-p").arg(krate);
|
||||
}
|
||||
|
||||
if builder.build.config.enable_bolt_settings && compiler.stage == 1 {
|
||||
// Relocations are required for BOLT to work.
|
||||
cargo.env("RUSTC_BOLT_LINK_FLAGS", "1");
|
||||
}
|
||||
|
||||
let _guard = builder.msg_sysroot_tool(
|
||||
Kind::Build,
|
||||
compiler.stage,
|
||||
|
|
|
|||
|
|
@ -234,6 +234,7 @@ pub struct Config {
|
|||
pub llvm_profile_use: Option<String>,
|
||||
pub llvm_profile_generate: bool,
|
||||
pub llvm_libunwind_default: Option<LlvmLibunwind>,
|
||||
pub enable_bolt_settings: bool,
|
||||
|
||||
pub reproducible_artifacts: Vec<String>,
|
||||
|
||||
|
|
@ -1128,6 +1129,7 @@ impl Config {
|
|||
config.free_args = std::mem::take(&mut flags.free_args);
|
||||
config.llvm_profile_use = flags.llvm_profile_use;
|
||||
config.llvm_profile_generate = flags.llvm_profile_generate;
|
||||
config.enable_bolt_settings = flags.enable_bolt_settings;
|
||||
|
||||
// Infer the rest of the configuration.
|
||||
|
||||
|
|
|
|||
|
|
@ -152,6 +152,9 @@ pub struct Flags {
|
|||
/// generate PGO profile with llvm built for rustc
|
||||
#[arg(global(true), long)]
|
||||
pub llvm_profile_generate: bool,
|
||||
/// Enable BOLT link flags
|
||||
#[arg(global(true), long)]
|
||||
pub enable_bolt_settings: bool,
|
||||
/// Additional reproducible artifacts that should be added to the reproducible artifacts archive.
|
||||
#[arg(global(true), long)]
|
||||
pub reproducible_artifact: Vec<String>,
|
||||
|
|
|
|||
|
|
@ -27,10 +27,15 @@ sed -i'' 's|ftp://gcc\.gnu\.org/|https://gcc.gnu.org/|g' ./contrib/download_prer
|
|||
./contrib/download_prerequisites
|
||||
mkdir ../gcc-build
|
||||
cd ../gcc-build
|
||||
|
||||
# '-fno-reorder-blocks-and-partition' is required to
|
||||
# enable BOLT optimization of the C++ standard library,
|
||||
# which is included in librustc_driver.so
|
||||
hide_output ../gcc-$GCC/configure \
|
||||
--prefix=/rustroot \
|
||||
--enable-languages=c,c++ \
|
||||
--disable-gnu-unique-object
|
||||
--disable-gnu-unique-object \
|
||||
--enable-cxx-flags='-fno-reorder-blocks-and-partition'
|
||||
hide_output make -j$(nproc)
|
||||
hide_output make install
|
||||
ln -s gcc /rustroot/bin/cc
|
||||
|
|
|
|||
|
|
@ -27,6 +27,7 @@ complete -c x.py -n "__fish_use_subcommand" -l include-default-paths -d 'include
|
|||
complete -c x.py -n "__fish_use_subcommand" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_use_subcommand" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_use_subcommand" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_use_subcommand" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_use_subcommand" -s h -l help -d 'Print help'
|
||||
complete -c x.py -n "__fish_use_subcommand" -f -a "build" -d 'Compile either the compiler or libraries'
|
||||
complete -c x.py -n "__fish_use_subcommand" -f -a "check" -d 'Compile either the compiler or libraries, using cargo check'
|
||||
|
|
@ -71,6 +72,7 @@ complete -c x.py -n "__fish_seen_subcommand_from build" -l include-default-paths
|
|||
complete -c x.py -n "__fish_seen_subcommand_from build" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from build" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from build" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from build" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from build" -s h -l help -d 'Print help (see more with \'--help\')'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from check" -l config -d 'TOML configuration file for build' -r -F
|
||||
complete -c x.py -n "__fish_seen_subcommand_from check" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
|
||||
|
|
@ -102,6 +104,7 @@ complete -c x.py -n "__fish_seen_subcommand_from check" -l include-default-paths
|
|||
complete -c x.py -n "__fish_seen_subcommand_from check" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from check" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from check" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from check" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from check" -s h -l help -d 'Print help (see more with \'--help\')'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clippy" -s A -d 'clippy lints to allow' -r
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clippy" -s D -d 'clippy lints to deny' -r
|
||||
|
|
@ -137,6 +140,7 @@ complete -c x.py -n "__fish_seen_subcommand_from clippy" -l include-default-path
|
|||
complete -c x.py -n "__fish_seen_subcommand_from clippy" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clippy" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clippy" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clippy" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clippy" -s h -l help -d 'Print help (see more with \'--help\')'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fix" -l config -d 'TOML configuration file for build' -r -F
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fix" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
|
||||
|
|
@ -167,6 +171,7 @@ complete -c x.py -n "__fish_seen_subcommand_from fix" -l include-default-paths -
|
|||
complete -c x.py -n "__fish_seen_subcommand_from fix" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fix" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fix" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fix" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fix" -s h -l help -d 'Print help (see more with \'--help\')'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fmt" -l config -d 'TOML configuration file for build' -r -F
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fmt" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
|
||||
|
|
@ -198,6 +203,7 @@ complete -c x.py -n "__fish_seen_subcommand_from fmt" -l include-default-paths -
|
|||
complete -c x.py -n "__fish_seen_subcommand_from fmt" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fmt" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fmt" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fmt" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from fmt" -s h -l help -d 'Print help (see more with \'--help\')'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from doc" -l config -d 'TOML configuration file for build' -r -F
|
||||
complete -c x.py -n "__fish_seen_subcommand_from doc" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
|
||||
|
|
@ -230,6 +236,7 @@ complete -c x.py -n "__fish_seen_subcommand_from doc" -l include-default-paths -
|
|||
complete -c x.py -n "__fish_seen_subcommand_from doc" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from doc" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from doc" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from doc" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from doc" -s h -l help -d 'Print help (see more with \'--help\')'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from test" -l skip -d 'skips tests matching SUBSTRING, if supported by test tool. May be passed multiple times' -r -F
|
||||
complete -c x.py -n "__fish_seen_subcommand_from test" -l test-args -d 'extra arguments to be passed for the test tool being used (e.g. libtest, compiletest or rustdoc)' -r
|
||||
|
|
@ -273,6 +280,7 @@ complete -c x.py -n "__fish_seen_subcommand_from test" -l include-default-paths
|
|||
complete -c x.py -n "__fish_seen_subcommand_from test" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from test" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from test" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from test" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from test" -s h -l help -d 'Print help (see more with \'--help\')'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from bench" -l test-args -r
|
||||
complete -c x.py -n "__fish_seen_subcommand_from bench" -l config -d 'TOML configuration file for build' -r -F
|
||||
|
|
@ -304,6 +312,7 @@ complete -c x.py -n "__fish_seen_subcommand_from bench" -l include-default-paths
|
|||
complete -c x.py -n "__fish_seen_subcommand_from bench" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from bench" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from bench" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from bench" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from bench" -s h -l help -d 'Print help'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clean" -l stage -d 'Clean a specific stage without touching other artifacts. By default, every stage is cleaned if this option is not used' -r
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clean" -l config -d 'TOML configuration file for build' -r -F
|
||||
|
|
@ -335,6 +344,7 @@ complete -c x.py -n "__fish_seen_subcommand_from clean" -l include-default-paths
|
|||
complete -c x.py -n "__fish_seen_subcommand_from clean" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clean" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clean" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clean" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from clean" -s h -l help -d 'Print help'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from dist" -l config -d 'TOML configuration file for build' -r -F
|
||||
complete -c x.py -n "__fish_seen_subcommand_from dist" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
|
||||
|
|
@ -365,6 +375,7 @@ complete -c x.py -n "__fish_seen_subcommand_from dist" -l include-default-paths
|
|||
complete -c x.py -n "__fish_seen_subcommand_from dist" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from dist" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from dist" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from dist" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from dist" -s h -l help -d 'Print help'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from install" -l config -d 'TOML configuration file for build' -r -F
|
||||
complete -c x.py -n "__fish_seen_subcommand_from install" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
|
||||
|
|
@ -395,6 +406,7 @@ complete -c x.py -n "__fish_seen_subcommand_from install" -l include-default-pat
|
|||
complete -c x.py -n "__fish_seen_subcommand_from install" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from install" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from install" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from install" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from install" -s h -l help -d 'Print help'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from run" -l args -d 'arguments for the tool' -r
|
||||
complete -c x.py -n "__fish_seen_subcommand_from run" -l config -d 'TOML configuration file for build' -r -F
|
||||
|
|
@ -426,6 +438,7 @@ complete -c x.py -n "__fish_seen_subcommand_from run" -l include-default-paths -
|
|||
complete -c x.py -n "__fish_seen_subcommand_from run" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from run" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from run" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from run" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from run" -s h -l help -d 'Print help (see more with \'--help\')'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from setup" -l config -d 'TOML configuration file for build' -r -F
|
||||
complete -c x.py -n "__fish_seen_subcommand_from setup" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
|
||||
|
|
@ -456,6 +469,7 @@ complete -c x.py -n "__fish_seen_subcommand_from setup" -l include-default-paths
|
|||
complete -c x.py -n "__fish_seen_subcommand_from setup" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from setup" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from setup" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from setup" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from setup" -s h -l help -d 'Print help (see more with \'--help\')'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from suggest" -l config -d 'TOML configuration file for build' -r -F
|
||||
complete -c x.py -n "__fish_seen_subcommand_from suggest" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
|
||||
|
|
@ -487,4 +501,5 @@ complete -c x.py -n "__fish_seen_subcommand_from suggest" -l include-default-pat
|
|||
complete -c x.py -n "__fish_seen_subcommand_from suggest" -l dry-run -d 'dry run; don\'t build anything'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from suggest" -l json-output -d 'use message-format=json'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from suggest" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from suggest" -l enable-bolt-settings -d 'Enable BOLT link flags'
|
||||
complete -c x.py -n "__fish_seen_subcommand_from suggest" -s h -l help -d 'Print help (see more with \'--help\')'
|
||||
|
|
|
|||
|
|
@ -53,6 +53,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help')
|
||||
[CompletionResult]::new('build', 'build', [CompletionResultType]::ParameterValue, 'Compile either the compiler or libraries')
|
||||
|
|
@ -104,6 +105,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
break
|
||||
|
|
@ -142,6 +144,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
break
|
||||
|
|
@ -184,6 +187,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
break
|
||||
|
|
@ -221,6 +225,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
break
|
||||
|
|
@ -259,6 +264,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
break
|
||||
|
|
@ -298,6 +304,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
break
|
||||
|
|
@ -348,6 +355,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
break
|
||||
|
|
@ -386,6 +394,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help')
|
||||
break
|
||||
|
|
@ -424,6 +433,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help')
|
||||
break
|
||||
|
|
@ -461,6 +471,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help')
|
||||
break
|
||||
|
|
@ -498,6 +509,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help')
|
||||
break
|
||||
|
|
@ -536,6 +548,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
break
|
||||
|
|
@ -573,6 +586,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
break
|
||||
|
|
@ -611,6 +625,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
|
|||
[CompletionResult]::new('--dry-run', 'dry-run', [CompletionResultType]::ParameterName, 'dry run; don''t build anything')
|
||||
[CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
|
||||
[CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
|
||||
[CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
|
||||
[CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
[CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
|
||||
break
|
||||
|
|
|
|||
|
|
@ -61,7 +61,7 @@ _x.py() {
|
|||
|
||||
case "${cmd}" in
|
||||
x.py)
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]... build check clippy fix fmt doc test bench clean dist install run setup suggest"
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]... build check clippy fix fmt doc test bench clean dist install run setup suggest"
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 1 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -171,7 +171,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__bench)
|
||||
opts="-v -i -j -h --test-args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --test-args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -285,7 +285,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__build)
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -395,7 +395,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__check)
|
||||
opts="-v -i -j -h --all-targets --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --all-targets --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -505,7 +505,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__clean)
|
||||
opts="-v -i -j -h --all --stage --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --all --stage --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -615,7 +615,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__clippy)
|
||||
opts="-A -D -W -F -v -i -j -h --fix --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-A -D -W -F -v -i -j -h --fix --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -741,7 +741,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__dist)
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -851,7 +851,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__doc)
|
||||
opts="-v -i -j -h --open --json --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --open --json --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -961,7 +961,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__fix)
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -1071,7 +1071,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__fmt)
|
||||
opts="-v -i -j -h --check --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --check --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -1181,7 +1181,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__install)
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -1291,7 +1291,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__run)
|
||||
opts="-v -i -j -h --args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -1405,7 +1405,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__setup)
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [<PROFILE>|hook|vscode|link] [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [<PROFILE>|hook|vscode|link] [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -1515,7 +1515,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__suggest)
|
||||
opts="-v -i -j -h --run --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --run --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
@ -1625,7 +1625,7 @@ _x.py() {
|
|||
return 0
|
||||
;;
|
||||
x.py__test)
|
||||
opts="-v -i -j -h --no-fail-fast --skip --test-args --rustc-args --no-doc --doc --bless --extra-checks --force-rerun --only-modified --compare-mode --pass --run --rustfix-coverage --verbose --incremental --config --build-dir --build --host --target --exclude --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
opts="-v -i -j -h --no-fail-fast --skip --test-args --rustc-args --no-doc --doc --bless --extra-checks --force-rerun --only-modified --compare-mode --pass --run --rustfix-coverage --verbose --incremental --config --build-dir --build --host --target --exclude --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
|
||||
if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
|
||||
COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
|
||||
return 0
|
||||
|
|
|
|||
|
|
@ -1,14 +1,14 @@
|
|||
use anyhow::Context;
|
||||
|
||||
use crate::exec::cmd;
|
||||
use crate::training::LlvmBoltProfile;
|
||||
use crate::training::BoltProfile;
|
||||
use camino::{Utf8Path, Utf8PathBuf};
|
||||
|
||||
use crate::utils::io::copy_file;
|
||||
|
||||
/// Instruments an artifact at the given `path` (in-place) with BOLT and then calls `func`.
|
||||
/// After this function finishes, the original file will be restored.
|
||||
pub fn with_bolt_instrumented<F: FnOnce() -> anyhow::Result<R>, R>(
|
||||
pub fn with_bolt_instrumented<F: FnOnce(&Utf8Path) -> anyhow::Result<R>, R>(
|
||||
path: &Utf8Path,
|
||||
func: F,
|
||||
) -> anyhow::Result<R> {
|
||||
|
|
@ -20,10 +20,16 @@ pub fn with_bolt_instrumented<F: FnOnce() -> anyhow::Result<R>, R>(
|
|||
|
||||
let instrumented_path = tempfile::NamedTempFile::new()?.into_temp_path();
|
||||
|
||||
let profile_dir =
|
||||
tempfile::TempDir::new().context("Could not create directory for BOLT profiles")?;
|
||||
let profile_prefix = profile_dir.path().join("prof.fdata");
|
||||
let profile_prefix = Utf8Path::from_path(&profile_prefix).unwrap();
|
||||
|
||||
// Instrument the original file with BOLT, saving the result into `instrumented_path`
|
||||
cmd(&["llvm-bolt"])
|
||||
.arg("-instrument")
|
||||
.arg(path)
|
||||
.arg(&format!("--instrumentation-file={profile_prefix}"))
|
||||
// Make sure that each process will write its profiles into a separate file
|
||||
.arg("--instrumentation-file-append-pid")
|
||||
.arg("-o")
|
||||
|
|
@ -36,11 +42,11 @@ pub fn with_bolt_instrumented<F: FnOnce() -> anyhow::Result<R>, R>(
|
|||
|
||||
// Run the function that will make use of the instrumented artifact.
|
||||
// The original file will be restored when `_backup_file` is dropped.
|
||||
func()
|
||||
func(profile_prefix)
|
||||
}
|
||||
|
||||
/// Optimizes the file at `path` with BOLT in-place using the given `profile`.
|
||||
pub fn bolt_optimize(path: &Utf8Path, profile: &LlvmBoltProfile) -> anyhow::Result<()> {
|
||||
pub fn bolt_optimize(path: &Utf8Path, profile: &BoltProfile) -> anyhow::Result<()> {
|
||||
// Copy the artifact to a new location, so that we do not use the same input and output file.
|
||||
// BOLT cannot handle optimizing when the input and output is the same file, because it performs
|
||||
// in-place patching.
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
use crate::environment::Environment;
|
||||
use crate::metrics::{load_metrics, record_metrics};
|
||||
use crate::timer::TimerSection;
|
||||
use crate::training::{LlvmBoltProfile, LlvmPGOProfile, RustcPGOProfile};
|
||||
use crate::training::{BoltProfile, LlvmPGOProfile, RustcPGOProfile};
|
||||
use camino::{Utf8Path, Utf8PathBuf};
|
||||
use std::collections::BTreeMap;
|
||||
use std::fs::File;
|
||||
|
|
@ -159,7 +159,12 @@ impl Bootstrap {
|
|||
self
|
||||
}
|
||||
|
||||
pub fn with_bolt_profile(mut self, profile: LlvmBoltProfile) -> Self {
|
||||
pub fn with_rustc_bolt_ldflags(mut self) -> Self {
|
||||
self.cmd = self.cmd.arg("--enable-bolt-settings");
|
||||
self
|
||||
}
|
||||
|
||||
pub fn with_bolt_profile(mut self, profile: BoltProfile) -> Self {
|
||||
self.cmd = self.cmd.arg("--reproducible-artifact").arg(profile.0.as_str());
|
||||
self
|
||||
}
|
||||
|
|
|
|||
|
|
@ -12,7 +12,10 @@ use crate::environment::{Environment, EnvironmentBuilder};
|
|||
use crate::exec::{cmd, Bootstrap};
|
||||
use crate::tests::run_tests;
|
||||
use crate::timer::Timer;
|
||||
use crate::training::{gather_llvm_bolt_profiles, gather_llvm_profiles, gather_rustc_profiles};
|
||||
use crate::training::{
|
||||
gather_bolt_profiles, gather_llvm_profiles, gather_rustc_profiles, llvm_benchmarks,
|
||||
rustc_benchmarks,
|
||||
};
|
||||
use crate::utils::artifact_size::print_binary_sizes;
|
||||
use crate::utils::io::{copy_directory, move_directory, reset_directory};
|
||||
use crate::utils::{
|
||||
|
|
@ -212,7 +215,12 @@ fn execute_pipeline(
|
|||
print_free_disk_space()?;
|
||||
|
||||
stage.section("Build PGO optimized rustc", |section| {
|
||||
Bootstrap::build(env).rustc_pgo_optimize(&profile).run(section)
|
||||
let mut cmd = Bootstrap::build(env).rustc_pgo_optimize(&profile);
|
||||
if env.use_bolt() {
|
||||
cmd = cmd.with_rustc_bolt_ldflags();
|
||||
}
|
||||
|
||||
cmd.run(section)
|
||||
})?;
|
||||
|
||||
Ok(profile)
|
||||
|
|
@ -246,13 +254,13 @@ fn execute_pipeline(
|
|||
Ok(profile)
|
||||
})?;
|
||||
|
||||
let llvm_bolt_profile = if env.use_bolt() {
|
||||
let bolt_profiles = if env.use_bolt() {
|
||||
// Stage 3: Build BOLT instrumented LLVM
|
||||
// We build a PGO optimized LLVM in this step, then instrument it with BOLT and gather BOLT profiles.
|
||||
// Note that we don't remove LLVM artifacts after this step, so that they are reused in the final dist build.
|
||||
// BOLT instrumentation is performed "on-the-fly" when the LLVM library is copied to the sysroot of rustc,
|
||||
// therefore the LLVM artifacts on disk are not "tainted" with BOLT instrumentation and they can be reused.
|
||||
timer.section("Stage 3 (LLVM BOLT)", |stage| {
|
||||
timer.section("Stage 3 (BOLT)", |stage| {
|
||||
stage.section("Build PGO optimized LLVM", |stage| {
|
||||
Bootstrap::build(env)
|
||||
.with_llvm_bolt_ldflags()
|
||||
|
|
@ -261,16 +269,17 @@ fn execute_pipeline(
|
|||
.run(stage)
|
||||
})?;
|
||||
|
||||
// Find the path to the `libLLVM.so` file
|
||||
let llvm_lib = io::find_file_in_dir(
|
||||
&env.build_artifacts().join("stage2").join("lib"),
|
||||
"libLLVM",
|
||||
".so",
|
||||
)?;
|
||||
let libdir = env.build_artifacts().join("stage2").join("lib");
|
||||
let llvm_lib = io::find_file_in_dir(&libdir, "libLLVM", ".so")?;
|
||||
|
||||
// Instrument it and gather profiles
|
||||
let profile = with_bolt_instrumented(&llvm_lib, || {
|
||||
stage.section("Gather profiles", |_| gather_llvm_bolt_profiles(env))
|
||||
log::info!("Optimizing {llvm_lib} with BOLT");
|
||||
|
||||
// FIXME(kobzol): try gather profiles together, at once for LLVM and rustc
|
||||
// Instrument the libraries and gather profiles
|
||||
let llvm_profile = with_bolt_instrumented(&llvm_lib, |llvm_profile_dir| {
|
||||
stage.section("Gather profiles", |_| {
|
||||
gather_bolt_profiles(env, "LLVM", llvm_benchmarks(env), llvm_profile_dir)
|
||||
})
|
||||
})?;
|
||||
print_free_disk_space()?;
|
||||
|
||||
|
|
@ -279,13 +288,29 @@ fn execute_pipeline(
|
|||
// the final dist build. However, when BOLT optimizes an artifact, it does so *in-place*,
|
||||
// therefore it will actually optimize all the hard links, which means that the final
|
||||
// packaged `libLLVM.so` file *will* be BOLT optimized.
|
||||
bolt_optimize(&llvm_lib, &profile).context("Could not optimize LLVM with BOLT")?;
|
||||
bolt_optimize(&llvm_lib, &llvm_profile).context("Could not optimize LLVM with BOLT")?;
|
||||
|
||||
let rustc_lib = io::find_file_in_dir(&libdir, "librustc_driver", ".so")?;
|
||||
|
||||
log::info!("Optimizing {rustc_lib} with BOLT");
|
||||
|
||||
// Instrument it and gather profiles
|
||||
let rustc_profile = with_bolt_instrumented(&rustc_lib, |rustc_profile_dir| {
|
||||
stage.section("Gather profiles", |_| {
|
||||
gather_bolt_profiles(env, "rustc", rustc_benchmarks(env), rustc_profile_dir)
|
||||
})
|
||||
})?;
|
||||
print_free_disk_space()?;
|
||||
|
||||
// Now optimize the library with BOLT.
|
||||
bolt_optimize(&rustc_lib, &rustc_profile)
|
||||
.context("Could not optimize rustc with BOLT")?;
|
||||
|
||||
// LLVM is not being cleared here, we want to use the BOLT-optimized LLVM
|
||||
Ok(Some(profile))
|
||||
Ok(vec![llvm_profile, rustc_profile])
|
||||
})?
|
||||
} else {
|
||||
None
|
||||
vec![]
|
||||
};
|
||||
|
||||
let mut dist = Bootstrap::dist(env, &dist_args)
|
||||
|
|
@ -293,13 +318,13 @@ fn execute_pipeline(
|
|||
.rustc_pgo_optimize(&rustc_pgo_profile)
|
||||
.avoid_rustc_rebuild();
|
||||
|
||||
if let Some(llvm_bolt_profile) = llvm_bolt_profile {
|
||||
dist = dist.with_bolt_profile(llvm_bolt_profile);
|
||||
for bolt_profile in bolt_profiles {
|
||||
dist = dist.with_bolt_profile(bolt_profile);
|
||||
}
|
||||
|
||||
// Final stage: Assemble the dist artifacts
|
||||
// The previous PGO optimized rustc build and PGO optimized LLVM builds should be reused.
|
||||
timer.section("Stage 4 (final build)", |stage| dist.run(stage))?;
|
||||
timer.section("Stage 5 (final build)", |stage| dist.run(stage))?;
|
||||
|
||||
// After dist has finished, run a subset of the test suite on the optimized artifacts to discover
|
||||
// possible regressions.
|
||||
|
|
|
|||
|
|
@ -27,8 +27,6 @@ const RUSTC_PGO_CRATES: &[&str] = &[
|
|||
"bitmaps-3.1.0",
|
||||
];
|
||||
|
||||
const LLVM_BOLT_CRATES: &[&str] = LLVM_PGO_CRATES;
|
||||
|
||||
fn init_compiler_benchmarks(
|
||||
env: &Environment,
|
||||
profiles: &[&str],
|
||||
|
|
@ -113,6 +111,14 @@ fn log_profile_stats(
|
|||
Ok(())
|
||||
}
|
||||
|
||||
pub fn llvm_benchmarks(env: &Environment) -> CmdBuilder {
|
||||
init_compiler_benchmarks(env, &["Debug", "Opt"], &["Full"], LLVM_PGO_CRATES)
|
||||
}
|
||||
|
||||
pub fn rustc_benchmarks(env: &Environment) -> CmdBuilder {
|
||||
init_compiler_benchmarks(env, &["Check", "Debug", "Opt"], &["All"], RUSTC_PGO_CRATES)
|
||||
}
|
||||
|
||||
pub struct LlvmPGOProfile(pub Utf8PathBuf);
|
||||
|
||||
pub fn gather_llvm_profiles(
|
||||
|
|
@ -122,9 +128,7 @@ pub fn gather_llvm_profiles(
|
|||
log::info!("Running benchmarks with PGO instrumented LLVM");
|
||||
|
||||
with_log_group("Running benchmarks", || {
|
||||
init_compiler_benchmarks(env, &["Debug", "Opt"], &["Full"], LLVM_PGO_CRATES)
|
||||
.run()
|
||||
.context("Cannot gather LLVM PGO profiles")
|
||||
llvm_benchmarks(env).run().context("Cannot gather LLVM PGO profiles")
|
||||
})?;
|
||||
|
||||
let merged_profile = env.artifact_dir().join("llvm-pgo.profdata");
|
||||
|
|
@ -157,7 +161,7 @@ pub fn gather_rustc_profiles(
|
|||
// Here we're profiling the `rustc` frontend, so we also include `Check`.
|
||||
// The benchmark set includes various stress tests that put the frontend under pressure.
|
||||
with_log_group("Running benchmarks", || {
|
||||
init_compiler_benchmarks(env, &["Check", "Debug", "Opt"], &["All"], RUSTC_PGO_CRATES)
|
||||
rustc_benchmarks(env)
|
||||
.env("LLVM_PROFILE_FILE", profile_template.as_str())
|
||||
.run()
|
||||
.context("Cannot gather rustc PGO profiles")
|
||||
|
|
@ -176,23 +180,25 @@ pub fn gather_rustc_profiles(
|
|||
Ok(RustcPGOProfile(merged_profile))
|
||||
}
|
||||
|
||||
pub struct LlvmBoltProfile(pub Utf8PathBuf);
|
||||
pub struct BoltProfile(pub Utf8PathBuf);
|
||||
|
||||
pub fn gather_llvm_bolt_profiles(env: &Environment) -> anyhow::Result<LlvmBoltProfile> {
|
||||
log::info!("Running benchmarks with BOLT instrumented LLVM");
|
||||
pub fn gather_bolt_profiles(
|
||||
env: &Environment,
|
||||
name: &str,
|
||||
benchmarks: CmdBuilder,
|
||||
profile_prefix: &Utf8Path,
|
||||
) -> anyhow::Result<BoltProfile> {
|
||||
log::info!("Running benchmarks with BOLT instrumented {name}");
|
||||
|
||||
with_log_group("Running benchmarks", || {
|
||||
init_compiler_benchmarks(env, &["Check", "Debug", "Opt"], &["Full"], LLVM_BOLT_CRATES)
|
||||
.run()
|
||||
.context("Cannot gather LLVM BOLT profiles")
|
||||
benchmarks.run().with_context(|| "Cannot gather {name} BOLT profiles")
|
||||
})?;
|
||||
|
||||
let merged_profile = env.artifact_dir().join("llvm-bolt.profdata");
|
||||
let profile_root = Utf8PathBuf::from("/tmp/prof.fdata");
|
||||
log::info!("Merging LLVM BOLT profiles to {merged_profile}");
|
||||
let merged_profile = env.artifact_dir().join(format!("{name}-bolt.profdata"));
|
||||
log::info!("Merging {name} BOLT profiles from {profile_prefix} to {merged_profile}");
|
||||
|
||||
let profiles: Vec<_> =
|
||||
glob::glob(&format!("{profile_root}*"))?.collect::<Result<Vec<_>, _>>()?;
|
||||
glob::glob(&format!("{profile_prefix}*"))?.collect::<Result<Vec<_>, _>>()?;
|
||||
|
||||
let mut merge_args = vec!["merge-fdata"];
|
||||
merge_args.extend(profiles.iter().map(|p| p.to_str().unwrap()));
|
||||
|
|
@ -204,7 +210,7 @@ pub fn gather_llvm_bolt_profiles(env: &Environment) -> anyhow::Result<LlvmBoltPr
|
|||
.context("Cannot merge BOLT profiles")
|
||||
})?;
|
||||
|
||||
log::info!("LLVM BOLT statistics");
|
||||
log::info!("{name} BOLT statistics");
|
||||
log::info!(
|
||||
"{merged_profile}: {}",
|
||||
humansize::format_size(std::fs::metadata(merged_profile.as_std_path())?.len(), BINARY)
|
||||
|
|
@ -216,8 +222,17 @@ pub fn gather_llvm_bolt_profiles(env: &Environment) -> anyhow::Result<LlvmBoltPr
|
|||
.collect::<Result<Vec<_>, _>>()?
|
||||
.into_iter()
|
||||
.sum::<u64>();
|
||||
log::info!("{profile_root}: {}", humansize::format_size(size, BINARY));
|
||||
log::info!("{profile_prefix}: {}", humansize::format_size(size, BINARY));
|
||||
log::info!("Profile file count: {}", profiles.len());
|
||||
|
||||
Ok(LlvmBoltProfile(merged_profile))
|
||||
// Delete the gathered profiles
|
||||
for profile in glob::glob(&format!("{profile_prefix}*"))?.into_iter() {
|
||||
if let Ok(profile) = profile {
|
||||
if let Err(error) = std::fs::remove_file(&profile) {
|
||||
log::error!("Cannot delete BOLT profile {}: {error:?}", profile.display());
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
Ok(BoltProfile(merged_profile))
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue