1 line
670 KiB
JSON
1 line
670 KiB
JSON
[{"doc":"Built in Lua 5.4 functions and variables.\n\nThe text for this documentation is originally from http:\/\/www.lua.org\/manual\/5.4\/ but has been programmatically parsed and rearranged for use with the Hammerspoon internal documentation system. Any errors, mistakes, or omissions are likely the result of this processing and is in no way a reflection on Lua.org or their work. If in doubt about anything presented in this lua section of the Hammerspoon documentation, please check the above web site for the authoritative answer.\n","items":[{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__add","type":"builtin","def":"__add"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__band","type":"builtin","def":"__band"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__bnot","type":"builtin","def":"__bnot"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__bor","type":"builtin","def":"__bor"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__bxor","type":"builtin","def":"__bxor"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__call","type":"builtin","def":"__call"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__concat","type":"builtin","def":"__concat"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__div","type":"builtin","def":"__div"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__eq","type":"builtin","def":"__eq"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__idiv","type":"builtin","def":"__idiv"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__index","type":"builtin","def":"__index"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__le","type":"builtin","def":"__le"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__len","type":"builtin","def":"__len"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__lt","type":"builtin","def":"__lt"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__mod","type":"builtin","def":"__mod"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__mul","type":"builtin","def":"__mul"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__newindex","type":"builtin","def":"__newindex"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__pow","type":"builtin","def":"__pow"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__shl","type":"builtin","def":"__shl"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__shr","type":"builtin","def":"__shr"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__sub","type":"builtin","def":"__sub"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"__unm","type":"builtin","def":"__unm"},{"doc":"3.3.8 – To-be-closed Variables\n\nA to-be-closed variable behaves like a constant local variable, except that its value is closed whenever the variable goes out of scope, including normal block termination, exiting its block by break\/goto\/return, or exiting by an error.\n\nHere, to close a value means to call its `__close` metamethod. When calling the metamethod, the value itself is passed as the first argument and the error object that caused the exit (if any) is passed as a second argument; if there was no error, the second argument is nil.\n\nThe value assigned to a to-be-closed variable must have a `__close` metamethod or be a false value. (nil and false are ignored as to-be-closed values.)\n\nIf several to-be-closed variables go out of scope at the same event, they are closed in the reverse order that they were declared.\n\nIf there is any error while running a closing method, that error is handled like an error in the regular code where the variable was defined. However, Lua may call the method one more time.\n\nAfter an error, the other pending closing methods will still be called. Errors in these methods interrupt the respective method and generate a warning, but are otherwise ignored; the error reported is only the original one.\n\nIf a coroutine yields and is never resumed again, some variables may never go out of scope, and therefore they will never be closed. (These variables are the ones created inside the coroutine and in scope at the point where the coroutine yielded.) Similarly, if a coroutine ends with an error, it does not unwind its stack, so it does not close any variable. In both cases, you can either use finalizers or call `coroutine.close` to close the variables. However, if the coroutine was created through `coroutine.wrap`, then its corresponding function will close the coroutine in case of errors.","name":"__close","type":"builtin","def":"__close"},{"doc":"`rawset (table, index, value)`\n\nSets the real value of `table[index]` to `value`, without using the `__newindex` metavalue. `table` must be a table, `index` any value different from nil and NaN, and `value` any Lua value.\n\nThis function returns `table`.","name":"rawset","type":"builtin","def":"rawset"},{"doc":"2.5.4 – Weak Tables\n\nA weak table is a table whose elements are weak references. A weak reference is ignored by the garbage collector. In other words, if the only references to an object are weak references, then the garbage collector will collect that object.\n\nA weak table can have weak keys, weak values, or both. A table with weak values allows the collection of its values, but prevents the collection of its keys. A table with both weak keys and weak values allows the collection of both keys and values. In any case, if either the key or the value is collected, the whole pair is removed from the table. The weakness of a table is controlled by the `__mode` field of its metatable. This metavalue, if present, must be one of the following strings: \"`k`\", for a table with weak keys; \"`v`\", for a table with weak values; or \"`kv`\", for a table with both weak keys and values.\n\nA table with weak keys and strong values is also called an ephemeron table. In an ephemeron table, a value is considered reachable only if its key is reachable. In particular, if the only reference to a key comes through its value, the pair is removed.\n\nAny change in the weakness of a table may take effect only at the next collect cycle. In particular, if you change the weakness to a stronger mode, Lua may still collect some items from that table before the change takes effect.\n\nOnly objects that have an explicit construction are removed from weak tables. Values, such as numbers and light C functions, are not subject to garbage collection, and therefore are not removed from weak tables (unless their associated values are collected). Although strings are subject to garbage collection, they do not have an explicit construction and their equality is by value; they behave more like values than like objects. Therefore, they are not removed from weak tables.\n\nResurrected objects (that is, objects being finalized and objects accessible only through objects being finalized) have a special behavior in weak tables. They are removed from weak values before running their finalizers, but are removed from weak keys only in the next collection after running their finalizers, when such objects are actually freed. This behavior allows the finalizer to access properties associated with the object through weak tables.\n\nIf a weak table is among the resurrected objects in a collection cycle, it may not be properly cleared until the next cycle.","name":"__mode","type":"builtin","def":"__mode"},{"doc":"`rawlen (v)`\n\nReturns the length of the object `v`, which must be a table or a string, without invoking the `__len` metamethod. Returns an integer.","name":"rawlen","type":"builtin","def":"rawlen"},{"doc":"`ipairs (t)`\n\nReturns three values (an iterator function, the table `t`, and 0) so that the construction\n\n~~~\n\n for i,v in ipairs(t) do body end\n\n~~~\n\nwill iterate over the key–value pairs (`1,t[1]`), (`2,t[2]`), ..., up to the first absent index.","name":"ipairs","type":"builtin","def":"ipairs"},{"doc":"2.5.3 – Garbage-Collection Metamethods\n\nYou can set garbage-collector metamethods for tables and, using the C API, for full userdata (see §2.4). These metamethods, called finalizers, are called when the garbage collector detects that the corresponding table or userdata is dead. Finalizers allow you to coordinate Lua's garbage collection with external resource management such as closing files, network or database connections, or freeing your own memory.\n\nFor an object (table or userdata) to be finalized when collected, you must mark it for finalization.\n\nYou mark an object for finalization when you set its metatable and the metatable has a field indexed by the string \"`__gc`\". Note that if you set a metatable without a `__gc` field and later create that field in the metatable, the object will not be marked for finalization.\n\nWhen a marked object becomes dead, it is not collected immediately by the garbage collector. Instead, Lua puts it in a list. After the collection, Lua goes through that list. For each object in the list, it checks the object's `__gc` metamethod: If it is present, Lua calls it with the object as its single argument.\n\nAt the end of each garbage-collection cycle, the finalizers are called in the reverse order that the objects were marked for finalization, among those collected in that cycle; that is, the first finalizer to be called is the one associated with the object marked last in the program. The execution of each finalizer may occur at any point during the execution of the regular code.\n\nBecause the object being collected must still be used by the finalizer, that object (and other objects accessible only through it) must be resurrected by Lua. Usually, this resurrection is transient, and the object memory is freed in the next garbage-collection cycle. However, if the finalizer stores the object in some global place (e.g., a global variable), then the resurrection is permanent. Moreover, if the finalizer marks a finalizing object for finalization again, its finalizer will be called again in the next cycle where the object is dead. In any case, the object memory is freed only in a GC cycle where the object is dead and not marked for finalization.\n\nWhen you close a state (see `lua_close`), Lua calls the finalizers of all objects marked for finalization, following the reverse order that they were marked. If any finalizer marks objects for collection during that phase, these marks have no effect.\n\nFinalizers cannot yield. Except for that, they can do anything, such as raise errors, create new objects, or even run the garbage collector. However, because they can run in unpredictable times, it is good practice to restrict each finalizer to the minimum necessary to properly release its associated resource.\n\nAny error while running a finalizer generates a warning; the error is not propagated.","name":"__gc","type":"builtin","def":"__gc"},{"doc":"`rawequal (v1, v2)`\n\nChecks whether `v1` is equal to `v2`, without invoking the `__eq` metamethod. Returns a boolean.","name":"rawequal","type":"builtin","def":"rawequal"},{"doc":"`error (message [, level])`\n\nRaises an error (see §2.3) with @{message} as the error object. This function never returns.\n\nUsually, `error` adds some information about the error position at the beginning of the message, if the message is a string. The `level` argument specifies how to get the error position. With level 1 (the default), the error position is where the `error` function was called. Level 2 points the error to where the function that called `error` was called; and so on. Passing a level 0 avoids the addition of error position information to the message.","name":"error","type":"builtin","def":"error"},{"doc":"6.1 – Basic Functions\n\nThe basic library provides core functions to Lua. If you do not include this library in your application, you should check carefully whether you need to provide implementations for some of its facilities.","name":"basic","type":"builtin","def":"basic"},{"doc":"`_G`\n\nA global variable (not a function) that holds the global environment (see §2.2). Lua itself does not use this variable; changing its value does not affect any environment, nor vice versa.","name":"_G","type":"builtin","def":"_G"},{"doc":"`luaL_newmetatable`\n\n[-0, +1, m]\n\n~~~\nint luaL_newmetatable (lua_State *L, const char *tname);\n~~~\n\nIf the registry already has the key `tname`, returns 0. Otherwise, creates a new table to be used as a metatable for userdata, adds to this new table the pair `__name = tname`, adds to the registry the pair `[tname] = new table`, and returns 1.\n\nIn both cases, the function pushes onto the stack the final value associated with `tname` in the registry.","name":"__name","type":"builtin","def":"__name"},{"doc":"`next (table [, index])`\n\nAllows a program to traverse all fields of a table. Its first argument is a table and its second argument is an index in this table. A call to `next` returns the next index of the table and its associated value. When called with nil as its second argument, `next` returns an initial index and its associated value. When called with the last index, or with nil in an empty table, `next` returns nil. If the second argument is absent, then it is interpreted as nil. In particular, you can use `next(t)` to check whether a table is empty.\n\nThe order in which the indices are enumerated is not specified, even for numeric indices. (To traverse a table in numerical order, use a numerical for.)\n\nThe behavior of `next` is undefined if, during the traversal, you assign any value to a non-existent field in the table. You may however modify existing fields. In particular, you may set existing fields to nil.","name":"next","type":"builtin","def":"next"},{"doc":"`dofile ([filename])`\n\nOpens the named file and executes its content as a Lua chunk. When called without arguments, `dofile` executes the content of the standard input (`stdin`). Returns all values returned by the chunk. In case of errors, `dofile` propagates the error to its caller. (That is, `dofile` does not run in protected mode.)","name":"dofile","type":"builtin","def":"dofile"},{"doc":"`load (chunk [, chunkname [, mode [, env]]])`\n\nLoads a chunk.\n\nIf `chunk` is a string, the chunk is this string. If `chunk` is a function, `load` calls it repeatedly to get the chunk pieces. Each call to `chunk` must return a string that concatenates with previous results. A return of an empty string, nil, or no value signals the end of the chunk.\n\nIf there are no syntactic errors, `load` returns the compiled chunk as a function; otherwise, it returns fail plus the error message.\n\nWhen you load a main chunk, the resulting function will always have exactly one upvalue, the `_ENV` variable (see §2.2). However, when you load a binary chunk created from a function (see `string.dump`), the resulting function can have an arbitrary number of upvalues, and there is no guarantee that its first upvalue will be the `_ENV` variable. (A non-main function may not even have an `_ENV` upvalue.)\n\nRegardless, if the resulting function has any upvalues, its first upvalue is set to the value of `env`, if that parameter is given, or to the value of the global environment. Other upvalues are initialized with nil. All upvalues are fresh, that is, they are not shared with any other function.\n\n`chunkname` is used as the name of the chunk for error messages and debug information (see §4.7). When absent, it defaults to `chunk`, if `chunk` is a string, or to \"`=(load)`\" otherwise.\n\nThe string `mode` controls whether the chunk can be text or binary (that is, a precompiled chunk). It may be the string \"`b`\" (only binary chunks), \"`t`\" (only text chunks), or \"`bt`\" (both binary and text). The default is \"`bt`\".\n\nLua does not check the consistency of binary chunks. Maliciously crafted binary chunks can crash the interpreter.","name":"load","type":"builtin","def":"load"},{"doc":"`tonumber (e [, base])`\n\nWhen called with no `base`, `tonumber` tries to convert its argument to a number. If the argument is already a number or a string convertible to a number, then `tonumber` returns this number; otherwise, it returns fail.\n\nThe conversion of strings can result in integers or floats, according to the lexical conventions of Lua (see §3.1). The string may have leading and trailing spaces and a sign.\n\nWhen called with `base`, then `e` must be a string to be interpreted as an integer numeral in that base. The base may be any integer between 2 and 36, inclusive. In bases above 10, the letter '`A`' (in either upper or lower case) represents 10, '`B`' represents 11, and so forth, with '`Z`' representing 35. If the string `e` is not a valid numeral in the given base, the function returns fail.","name":"tonumber","type":"builtin","def":"tonumber"},{"doc":"`getmetatable (object)`\n\nIf `object` does not have a metatable, returns nil. Otherwise, if the object's metatable has a `__metatable` field, returns the associated value. Otherwise, returns the metatable of the given object.","name":"getmetatable","type":"builtin","def":"getmetatable"},{"doc":"`getmetatable (object)`\n\nIf `object` does not have a metatable, returns nil. Otherwise, if the object's metatable has a `__metatable` field, returns the associated value. Otherwise, returns the metatable of the given object.","name":"__metatable","type":"builtin","def":"__metatable"},{"doc":"`setmetatable (table, metatable)`\n\nSets the metatable for the given table. If `metatable` is nil, removes the metatable of the given table. If the original metatable has a `__metatable` field, raises an error.\n\nThis function returns `table`.\n\nTo change the metatable of other types from Lua code, you must use the debug library (§6.10).","name":"setmetatable","type":"builtin","def":"setmetatable"},{"doc":"`_VERSION`\n\nA global variable (not a function) that holds a string containing the running Lua version. The current value of this variable is \"`Lua 5.4`\".","name":"_VERSION","type":"builtin","def":"_VERSION"},{"doc":"`print (···)`\n\nReceives any number of arguments and prints their values to `stdout`, converting each argument to a string following the same rules of `tostring`.\n\nThe function `print` is not intended for formatted output, but only as a quick way to show a value, for instance for debugging. For complete control over the output, use `string.format` and `io.write`.","name":"print","type":"builtin","def":"print"},{"doc":"`collectgarbage ([opt [, arg]])`\n\nThis function is a generic interface to the garbage collector. It performs different functions according to its first argument, `opt`:\n\n * \"`collect`\": Performs a full garbage-collection cycle. This is the default option.\n\n * \"`stop`\": Stops automatic execution of the garbage collector. The collector will run only when explicitly invoked, until a call to restart it.\n\n * \"`restart`\": Restarts automatic execution of the garbage collector.\n\n * \"`count`\": Returns the total memory in use by Lua in Kbytes. The value has a fractional part, so that it multiplied by 1024 gives the exact number of bytes in use by Lua.\n\n * \"`step`\": Performs a garbage-collection step. The step \"size\" is controlled by `arg`. With a zero value, the collector will perform one basic (indivisible) step. For non-zero values, the collector will perform as if that amount of memory (in Kbytes) had been allocated by Lua. Returns true if the step finished a collection cycle.\n\n * \"`isrunning`\": Returns a boolean that tells whether the collector is running (i.e., not stopped).\n\n * \"`incremental`\": Change the collector mode to incremental. This option can be followed by three numbers: the garbage-collector pause, the step multiplier, and the step size (see §2.5.1). A zero means to not change that value.\n\n * \"`generational`\": Change the collector mode to generational. This option can be followed by two numbers: the garbage-collector minor multiplier and the major multiplier (see §2.5.2). A zero means to not change that value.\n\nSee §2.5 for more details about garbage collection and some of these options.","name":"collectgarbage","type":"builtin","def":"collectgarbage"},{"doc":"`xpcall (f, msgh [, arg1, ···])`\n\nThis function is similar to `pcall`, except that it sets a new message handler `msgh`.","name":"xpcall","type":"builtin","def":"xpcall"},{"doc":"`rawget (table, index)`\n\nGets the real value of `table[index]`, without using the `__index` metavalue. `table` must be a table; `index` may be any value.","name":"rawget","type":"builtin","def":"rawget"},{"doc":"`loadfile ([filename [, mode [, env]]])`\n\nSimilar to `load`, but gets the chunk from file `filename` or from the standard input, if no file name is given.","name":"loadfile","type":"builtin","def":"loadfile"},{"doc":"`select (index, ···)`\n\nIf `index` is a number, returns all arguments after argument number `index`; a negative number indexes from the end (-1 is the last argument). Otherwise, `index` must be the string `\"#\"`, and `select` returns the total number of extra arguments it received.","name":"select","type":"builtin","def":"select"},{"doc":"`type (v)`\n\nReturns the type of its only argument, coded as a string. The possible results of this function are \"`nil`\" (a string, not the value nil), \"`number`\", \"`string`\", \"`boolean`\", \"`table`\", \"`function`\", \"`thread`\", and \"`userdata`\".","name":"type","type":"builtin","def":"type"},{"doc":"`tostring (v)`\n\nReceives a value of any type and converts it to a string in a human-readable format.\n\nIf the metatable of `v` has a `__tostring` field, then `tostring` calls the corresponding value with `v` as argument, and uses the result of the call as its result. Otherwise, if the metatable of `v` has a `__name` field with a string value, `tostring` may use that string in its final result.\n\nFor complete control of how numbers are converted, use `string.format`.","name":"tostring","type":"builtin","def":"tostring"},{"doc":"`tostring (v)`\n\nReceives a value of any type and converts it to a string in a human-readable format.\n\nIf the metatable of `v` has a `__tostring` field, then `tostring` calls the corresponding value with `v` as argument, and uses the result of the call as its result. Otherwise, if the metatable of `v` has a `__name` field with a string value, `tostring` may use that string in its final result.\n\nFor complete control of how numbers are converted, use `string.format`.","name":"__tostring","type":"builtin","def":"__tostring"},{"doc":"`require (modname)`\n\nLoads the given module. The function starts by looking into the `package.loaded` table to determine whether `modname` is already loaded. If it is, then `require` returns the value stored at `package.loaded[modname]`. (The absence of a second result in this case signals that this call did not have to load the module.) Otherwise, it tries to find a loader for the module.\n\nTo find a loader, `require` is guided by the table `package.searchers`. Each item in this table is a search function, that searches for the module in a particular way. By changing this table, we can change how `require` looks for a module. The following explanation is based on the default configuration for `package.searchers`.\n\nFirst `require` queries `package.preload[modname]`. If it has a value, this value (which must be a function) is the loader. Otherwise `require` searches for a Lua loader using the path stored in `package.path`. If that also fails, it searches for a C loader using the path stored in `package.cpath`. If that also fails, it tries an all-in-one loader (see `package.searchers`).\n\nOnce a loader is found, `require` calls the loader with two arguments: `modname` and an extra value, a loader data, also returned by the searcher. The loader data can be any value useful to the module; for the default searchers, it indicates where the loader was found. (For instance, if the loader came from a file, this extra value is the file path.) If the loader returns any non-nil value, `require` assigns the returned value to `package.loaded[modname]`. If the loader does not return a non-nil value and has not assigned any value to `package.loaded[modname]`, then `require` assigns true to this entry. In any case, `require` returns the final value of `package.loaded[modname]`. Besides that value, `require` also returns as a second result the loader data returned by the searcher, which indicates how `require` found the module.\n\nIf there is any error loading or running the module, or if it cannot find any loader for the module, then `require` raises an error.","name":"require","type":"builtin","def":"require"},{"doc":"`pairs (t)`\n\nIf `t` has a metamethod `__pairs`, calls it with `t` as argument and returns the first three results from the call.\n\nOtherwise, returns three values: the `next` function, the table `t`, and nil, so that the construction\n\n~~~\n\n for k,v in pairs(t) do body end\n\n~~~\n\nwill iterate over all key–value pairs of table `t`.\n\nSee function `next` for the caveats of modifying the table during its traversal.","name":"pairs","type":"builtin","def":"pairs"},{"doc":"`pairs (t)`\n\nIf `t` has a metamethod `__pairs`, calls it with `t` as argument and returns the first three results from the call.\n\nOtherwise, returns three values: the `next` function, the table `t`, and nil, so that the construction\n\n~~~\n\n for k,v in pairs(t) do body end\n\n~~~\n\nwill iterate over all key–value pairs of table `t`.\n\nSee function `next` for the caveats of modifying the table during its traversal.","name":"__pairs","type":"builtin","def":"__pairs"},{"doc":"`warn (msg1, ···)`\n\nEmits a warning with a message composed by the concatenation of all its arguments (which should be strings).\n\nBy convention, a one-piece message starting with '`@`' is intended to be a control message, which is a message to the warning system itself. In particular, the standard warning function in Lua recognizes the control messages \"`@off`\", to stop the emission of warnings, and \"`@on`\", to (re)start the emission; it ignores unknown control messages.","name":"warn","type":"builtin","def":"warn"},{"doc":"`pcall (f [, arg1, ···])`\n\nCalls the function `f` with the given arguments in protected mode. This means that any error inside `f` is not propagated; instead, `pcall` catches the error and returns a status code. Its first result is the status code (a boolean), which is true if the call succeeds without errors. In such case, `pcall` also returns all results from the call, after this first result. In case of any error, `pcall` returns false plus the error object. Note that errors caught by `pcall` do not call a message handler.","name":"pcall","type":"builtin","def":"pcall"},{"doc":"`assert (v [, message])`\n\nRaises an error if the value of its argument `v` is false (i.e., nil or false); otherwise, returns all its arguments. In case of error, `message` is the error object; when absent, it defaults to \"`assertion failed!`\"","name":"assert","type":"builtin","def":"assert"}],"name":"lua","desc":"Lua 5.4 Documentation"},{"doc":"4 – The Application Program Interface\n\nThis section describes the C API for Lua, that is, the set of C functions available to the host program to communicate with Lua. All API functions and related types and constants are declared in the header file `lua.h`.\n\nEven when we use the term \"function\", any facility in the API may be provided as a macro instead. Except where stated otherwise, all such macros use each of their arguments exactly once (except for the first argument, which is always a Lua state), and so do not generate any hidden side-effects.\n\nAs in most C libraries, the Lua API functions do not check their arguments for validity or consistency. However, you can change this behavior by compiling Lua with the macro `LUA_USE_APICHECK` defined.\n\nThe Lua library is fully reentrant: it has no global variables. It keeps all information it needs in a dynamic structure, called the Lua state.\n\nEach Lua state has one or more threads, which correspond to independent, cooperative lines of execution. The type `lua_State` (despite its name) refers to a thread. (Indirectly, through the thread, it also refers to the Lua state associated to the thread.)\n\nA pointer to a thread must be passed as the first argument to every function in the library, except to `lua_newstate`, which creates a Lua state from scratch and returns a pointer to the main thread in the new state.","items":[{"doc":"`lua_rawget`\n\n[-1, +1, –]\n\n~~~\nint lua_rawget (lua_State *L, int index);\n~~~\n\nSimilar to `lua_gettable`, but does a raw access (i.e., without metamethods).","name":"lua_rawget","type":"c-api","def":"lua_rawget"},{"doc":"`lua_close`\n\n[-0, +0, –]\n\n~~~\nvoid lua_close (lua_State *L);\n~~~\n\nClose all active to-be-closed variables in the main thread, release all objects in the given Lua state (calling the corresponding garbage-collection metamethods, if any), and frees all dynamic memory used by this state.\n\nOn several platforms, you may not need to call this function, because all resources are naturally released when the host program ends. On the other hand, long-running programs that create multiple states, such as daemons or web servers, will probably need to close states as soon as they are not needed.","name":"lua_close","type":"c-api","def":"lua_close"},{"doc":"`lua_type`\n\n[-0, +0, –]\n\n~~~\nint lua_type (lua_State *L, int index);\n~~~\n\nReturns the type of the value in the given valid index, or `LUA_TNONE` for a non-valid but acceptable index. The types returned by `lua_type` are coded by the following constants defined in `lua.h`: `LUA_TNIL`, `LUA_TNUMBER`, `LUA_TBOOLEAN`, `LUA_TSTRING`, `LUA_TTABLE`, `LUA_TFUNCTION`, `LUA_TUSERDATA`, `LUA_TTHREAD`, and `LUA_TLIGHTUSERDATA`.","name":"lua_type","type":"c-api","def":"lua_type"},{"doc":"`lua_istable`\n\n[-0, +0, –]\n\n~~~\nint lua_istable (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a table, and 0 otherwise.","name":"lua_istable","type":"c-api","def":"lua_istable"},{"doc":"`lua_call`\n\n[-(nargs+1), +nresults, e]\n\n~~~\nvoid lua_call (lua_State *L, int nargs, int nresults);\n~~~\n\nCalls a function. Like regular Lua calls, `lua_call` respects the `__call` metamethod. So, here the word \"function\" means any callable value.\n\nTo do a call you must use the following protocol: first, the function to be called is pushed onto the stack; then, the arguments to the call are pushed in direct order; that is, the first argument is pushed first. Finally you call `lua_call`; `nargs` is the number of arguments that you pushed onto the stack. When the function returns, all arguments and the function value are popped and the call results are pushed onto the stack. The number of results is adjusted to `nresults`, unless `nresults` is `LUA_MULTRET`. In this case, all results from the function are pushed; Lua takes care that the returned values fit into the stack space, but it does not ensure any extra space in the stack. The function results are pushed onto the stack in direct order (the first result is pushed first), so that after the call the last result is on the top of the stack.\n\nAny error while calling and running the function is propagated upwards (with a `longjmp`).\n\nThe following example shows how the host program can do the equivalent to this Lua code:\n\n~~~\n\n a = f(\"how\", t.x, 14)\n\n~~~\n\nHere it is in C:\n\n~~~\n\n lua_getglobal(L, \"f\"); \/* function to be called *\/\n lua_pushliteral(L, \"how\"); \/* 1st argument *\/\n lua_getglobal(L, \"t\"); \/* table to be indexed *\/\n lua_getfield(L, -1, \"x\"); \/* push result of t.x (2nd arg) *\/\n lua_remove(L, -2); \/* remove 't' from the stack *\/\n lua_pushinteger(L, 14); \/* 3rd argument *\/\n lua_call(L, 3, 1); \/* call 'f' with 3 arguments and 1 result *\/\n lua_setglobal(L, \"a\"); \/* set global 'a' *\/\n\n~~~\n\nNote that the code above is balanced: at its end, the stack is back to its original configuration. This is considered good programming practice.","name":"lua_call","type":"c-api","def":"lua_call"},{"doc":"`lua_compare`\n\n[-0, +0, e]\n\n~~~\nint lua_compare (lua_State *L, int index1, int index2, int op);\n~~~\n\nCompares two Lua values. Returns 1 if the value at index `index1` satisfies `op` when compared with the value at index `index2`, following the semantics of the corresponding Lua operator (that is, it may call metamethods). Otherwise returns 0. Also returns 0 if any of the indices is not valid.\n\nThe value of `op` must be one of the following constants:\n\n * `LUA_OPEQ`: compares for equality (`==`)\n * `LUA_OPLT`: compares for less than (`<`)\n * `LUA_OPLE`: compares for less or equal (`<=`)","name":"lua_compare","type":"c-api","def":"lua_compare"},{"doc":"`lua_rawequal`\n\n[-0, +0, –]\n\n~~~\nint lua_rawequal (lua_State *L, int index1, int index2);\n~~~\n\nReturns 1 if the two values in indices `index1` and `index2` are primitively equal (that is, equal without calling the `__eq` metamethod). Otherwise returns 0. Also returns 0 if any of the indices are not valid.","name":"lua_rawequal","type":"c-api","def":"lua_rawequal"},{"doc":"`lua_replace`\n\n[-1, +0, –]\n\n~~~\nvoid lua_replace (lua_State *L, int index);\n~~~\n\nMoves the top element into the given valid index without shifting any element (therefore replacing the value at that given index), and then pops the top element.","name":"lua_replace","type":"c-api","def":"lua_replace"},{"doc":"`lua_isuserdata`\n\n[-0, +0, –]\n\n~~~\nint lua_isuserdata (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a userdata (either full or light), and 0 otherwise.","name":"lua_isuserdata","type":"c-api","def":"lua_isuserdata"},{"doc":"`luaL_checkinteger`\n\n[-0, +0, v]\n\n~~~\nlua_Integer luaL_checkinteger (lua_State *L, int arg);\n~~~\n\nChecks whether the function argument `arg` is an integer (or can be converted to an integer) and returns this integer.","name":"luaL_checkinteger","type":"c-api","def":"luaL_checkinteger"},{"doc":"the interpreter checks for an environment variable `LUA_INIT_5_4` (or `LUA_INIT` if the versioned name is not defined) before running any argument. If the variable content has the format `@filename`, then `lua` executes the file. Otherwise, `lua` executes the string itself.\n\nWhen called with the option `-E`, Lua does not consult any environment variables. In particular, the values of `package.path` and `package.cpath` are set with the default paths defined in `luaconf.h`.\n\nThe options `-e`, `-l`, and `-W` are handled in the order they appear. For instance, an invocation like\n\n~~~\n\n $ lua -e 'a=1' -llib1 script.lua\n\n~~~\n\nwill first set `a` to 1, then require the library `lib1`, and finally run the file `script.lua` with no arguments. (Here `$` is the shell prompt. Your prompt may be different.)\n\nBefore running any code, `lua` collects all command-line arguments in a global table called `arg`. The script name goes to index 0, the first argument after the script name goes to index 1, and so on. Any arguments before the script name (that is, the interpreter name plus its options) go to negative indices. For instance, in the call\n\n~~~\n\n $ lua -la b.lua t1 t2\n\n~~~\n\nthe table is like this:\n\n~~~\n\n arg = { [-2] = \"lua\", [-1] = \"-la\",\n [0] = \"b.lua\",\n [1] = \"t1\", [2] = \"t2\" }\n\n~~~\n\nIf there is no script in the call, the interpreter name goes to index 0, followed by the other arguments. For instance, the call\n\n~~~\n\n $ lua -e \"print(arg[1])\"\n\n~~~\n\nwill print \"`-e`\". If there is a script, the script is called with arguments `arg[1]`, ···, `arg[#arg]`. Like all chunks in Lua, the script is compiled as a vararg function.\n\nIn interactive mode, Lua repeatedly prompts and waits for a line. After reading a line, Lua first try to interpret the line as an expression. If it succeeds, it prints its value. Otherwise, it interprets the line as a statement. If you write an incomplete statement, the interpreter waits for its completion by issuing a different prompt.\n\nIf the global variable `_PROMPT` contains a string, then its value is used as the prompt. Similarly, if the global variable `_PROMPT2` contains a string, its value is used as the secondary prompt (issued during incomplete statements).\n\nIn case of unprotected errors in the script, the interpreter reports the error to the standard error stream. If the error object is not a string but has a metamethod `__tostring`, the interpreter calls this metamethod to produce the final message. Otherwise, the interpreter converts the error object to a string and adds a stack traceback to it. When warnings are on, they are simply printed in the standard error output.\n\nWhen finishing normally, the interpreter closes its main Lua state (see `lua_close`). The script can avoid this step by calling `os.exit` to terminate.\n\nTo allow the use of Lua as a script interpreter in Unix systems, Lua skips the first line of a file chunk if it starts with `#`. Therefore, Lua scripts can be made into executable programs by using `chmod +x` and the `#!` form, as in\n\n~~~\n\n #!\/usr\/local\/bin\/lua\n\n~~~\n\nOf course, the location of the Lua interpreter may be different in your machine. If `lua` is in your `PATH`, then\n\n~~~\n\n #!\/usr\/bin\/env lua\n\n~~~\n\nis a more portable solution.","name":"LUA_INIT_5_4","type":"c-api","def":"LUA_INIT_5_4"},{"doc":"`lua_callk`\n\n[-(nargs + 1), +nresults, e]\n\n~~~\nvoid lua_callk (lua_State *L,\n int nargs,\n int nresults,\n lua_KContext ctx,\n lua_KFunction k);\n~~~\n\nThis function behaves exactly like `lua_call`, but allows the called function to yield (see §4.5).","name":"lua_callk","type":"c-api","def":"lua_callk"},{"doc":"`luaL_argerror`\n\n[-0, +0, v]\n\n~~~\nint luaL_argerror (lua_State *L, int arg, const char *extramsg);\n~~~\n\nRaises an error reporting a problem with argument `arg` of the C function that called it, using a standard message that includes `extramsg` as a comment:\n\n~~~\n\n bad argument #arg to 'funcname' (extramsg)\n\n~~~\n\nThis function never returns.","name":"luaL_argerror","type":"c-api","def":"luaL_argerror"},{"doc":"`luaL_Buffer`\n\n~~~\ntypedef struct luaL_Buffer luaL_Buffer;\n~~~\n\nType for a string buffer.\n\nA string buffer allows C code to build Lua strings piecemeal. Its pattern of use is as follows:\n\n * First declare a variable `b` of type `luaL_Buffer`.\n\n * Then initialize it with a call `luaL_buffinit(L, &b)`.\n\n * Then add string pieces to the buffer calling any of the `luaL_add*` functions.\n\n * Finish by calling `luaL_pushresult(&b)`. This call leaves the final string on the top of the stack.\n\nIf you know beforehand the maximum size of the resulting string, you can use the buffer like this:\n\n * First declare a variable `b` of type `luaL_Buffer`.\n\n * Then initialize it and preallocate a space of size `sz` with a call `luaL_buffinitsize(L, &b, sz)`.\n\n * Then produce the string into that space.\n\n * Finish by calling `luaL_pushresultsize(&b, sz)`, where `sz` is the total size of the resulting string copied into that space (which may be less than or equal to the preallocated size).\n\nDuring its normal operation, a string buffer uses a variable number of stack slots. So, while using a buffer, you cannot assume that you know where the top of the stack is. You can use the stack between successive calls to buffer operations as long as that use is balanced; that is, when you call a buffer operation, the stack is at the same level it was immediately after the previous buffer operation. (The only exception to this rule is `luaL_addvalue`.) After calling `luaL_pushresult`, the stack is back to its level when the buffer was initialized, plus the final string on its top.","name":"luaL_Buffer","type":"c-api","def":"luaL_Buffer"},{"doc":"`luaL_buffinitsize`\n\n[-?, +?, m]\n\n~~~\nchar *luaL_buffinitsize (lua_State *L, luaL_Buffer *B, size_t sz);\n~~~\n\nEquivalent to the sequence `luaL_buffinit`, `luaL_prepbuffsize`.","name":"luaL_buffinitsize","type":"c-api","def":"luaL_buffinitsize"},{"doc":"`lua_register`\n\n[-0, +0, e]\n\n~~~\nvoid lua_register (lua_State *L, const char *name, lua_CFunction f);\n~~~\n\nSets the C function `f` as the new value of global `name`. It is defined as a macro:\n\n~~~\n\n #define lua_register(L,n,f) \\\n (lua_pushcfunction(L, f), lua_setglobal(L, n))\n\n~~~","name":"lua_register","type":"c-api","def":"lua_register"},{"doc":"`lua_pushglobaltable`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushglobaltable (lua_State *L);\n~~~\n\nPushes the global environment onto the stack.","name":"lua_pushglobaltable","type":"c-api","def":"lua_pushglobaltable"},{"doc":"`luaL_error`\n\n[-0, +0, v]\n\n~~~\nint luaL_error (lua_State *L, const char *fmt, ...);\n~~~\n\nRaises an error. The error message format is given by `fmt` plus any extra arguments, following the same rules of `lua_pushfstring`. It also adds at the beginning of the message the file name and the line number where the error occurred, if this information is available.\n\nThis function never returns, but it is an idiom to use it in C functions as `return luaL_error(args)`.","name":"luaL_error","type":"c-api","def":"luaL_error"},{"doc":"`lua_getallocf`\n\n[-0, +0, –]\n\n~~~\nlua_Alloc lua_getallocf (lua_State *L, void **ud);\n~~~\n\nReturns the memory-allocation function of a given state. If `ud` is not `NULL`, Lua stores in `*ud` the opaque pointer given when the memory-allocator function was set.","name":"lua_getallocf","type":"c-api","def":"lua_getallocf"},{"doc":"`lua_Number`\n\n~~~\ntypedef ... lua_Number;\n~~~\n\nThe type of floats in Lua.\n\nBy default this type is double, but that can be changed to a single float or a long double. (See `LUA_FLOAT_TYPE` in `luaconf.h`.)","name":"lua_Number","type":"c-api","def":"lua_Number"},{"doc":"`luaL_buffaddr`\n\n[-0, +0, –]\n\n~~~\nchar *luaL_buffaddr (luaL_Buffer *B);\n~~~\n\nReturns the address of the current content of buffer `B` (see `luaL_Buffer`). Note that any addition to the buffer may invalidate this address.","name":"luaL_buffaddr","type":"c-api","def":"luaL_buffaddr"},{"doc":"`luaL_tolstring`\n\n[-0, +1, e]\n\n~~~\nconst char *luaL_tolstring (lua_State *L, int idx, size_t *len);\n~~~\n\nConverts any Lua value at the given index to a C string in a reasonable format. The resulting string is pushed onto the stack and also returned by the function. If `len` is not `NULL`, the function also sets `*len` with the string length.\n\nIf the value has a metatable with a `__tostring` field, then `luaL_tolstring` calls the corresponding metamethod with the value as argument, and uses the result of the call as its result.","name":"luaL_tolstring","type":"c-api","def":"luaL_tolstring"},{"doc":"`lua_pushstring`\n\n[-0, +1, m]\n\n~~~\nconst char *lua_pushstring (lua_State *L, const char *s);\n~~~\n\nPushes the zero-terminated string pointed to by `s` onto the stack. Lua will make or reuse an internal copy of the given string, so the memory at `s` can be freed or reused immediately after the function returns.\n\nReturns a pointer to the internal copy of the string.\n\nIf `s` is `NULL`, pushes nil and returns `NULL`.","name":"lua_pushstring","type":"c-api","def":"lua_pushstring"},{"doc":"`lua_gethookmask`\n\n[-0, +0, –]\n\n~~~\nint lua_gethookmask (lua_State *L);\n~~~\n\nReturns the current hook mask.","name":"lua_gethookmask","type":"c-api","def":"lua_gethookmask"},{"doc":"`lua_pushlightuserdata`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushlightuserdata (lua_State *L, void *p);\n~~~\n\nPushes a light userdata onto the stack.\n\nUserdata represent C values in Lua. A light userdata represents a pointer, a `void*`. It is a value (like a number): you do not create it, it has no individual metatable, and it is not collected (as it was never created). A light userdata is equal to \"any\" light userdata with the same C address.","name":"lua_pushlightuserdata","type":"c-api","def":"lua_pushlightuserdata"},{"doc":"`lua_tolstring`\n\n[-0, +0, m]\n\n~~~\nconst char *lua_tolstring (lua_State *L, int index, size_t *len);\n~~~\n\nConverts the Lua value at the given index to a C string. If `len` is not `NULL`, it sets `*len` with the string length. The Lua value must be a string or a number; otherwise, the function returns `NULL`. If the value is a number, then `lua_tolstring` also changes the actual value in the stack to a string. (This change confuses `lua_next` when `lua_tolstring` is applied to keys during a table traversal.)\n\n`lua_tolstring` returns a pointer to a string inside the Lua state. This string always has a zero ('`\\0`') after its last character (as in C), but can contain other zeros in its body.\n\nBecause Lua has garbage collection, there is no guarantee that the pointer returned by `lua_tolstring` will be valid after the corresponding Lua value is removed from the stack.","name":"lua_tolstring","type":"c-api","def":"lua_tolstring"},{"doc":"`lua_Hook`\n\n~~~\ntypedef void (*lua_Hook) (lua_State *L, lua_Debug *ar);\n~~~\n\nType for debugging hook functions.\n\nWhenever a hook is called, its `ar` argument has its field `event` set to the specific event that triggered the hook. Lua identifies these events with the following constants: `LUA_HOOKCALL`, `LUA_HOOKRET`, `LUA_HOOKTAILCALL`, `LUA_HOOKLINE`, and `LUA_HOOKCOUNT`. Moreover, for line events, the field `currentline` is also set. To get the value of any other field in `ar`, the hook must call `lua_getinfo`.\n\nFor call events, `event` can be `LUA_HOOKCALL`, the normal value, or `LUA_HOOKTAILCALL`, for a tail call; in this case, there will be no corresponding return event.\n\nWhile Lua is running a hook, it disables other calls to hooks. Therefore, if a hook calls back Lua to execute a function or a chunk, this execution occurs without any calls to hooks.\n\nHook functions cannot have continuations, that is, they cannot call `lua_yieldk`, `lua_pcallk`, or `lua_callk` with a non-null `k`.\n\nHook functions can yield under the following conditions: Only count and line events can yield; to yield, a hook function must finish its execution calling `lua_yield` with `nresults` equal to zero (that is, with no values).","name":"lua_Hook","type":"c-api","def":"lua_Hook"},{"doc":"`lua_setglobal`\n\n[-1, +0, e]\n\n~~~\nvoid lua_setglobal (lua_State *L, const char *name);\n~~~\n\nPops a value from the stack and sets it as the new value of global `name`.","name":"lua_setglobal","type":"c-api","def":"lua_setglobal"},{"doc":"`lua_settop`\n\n[-?, +?, –]\n\n~~~\nvoid lua_settop (lua_State *L, int index);\n~~~\n\nAccepts any index, or 0, and sets the stack top to this index. If the new top is greater than the old one, then the new elements are filled with nil. If `index` is 0, then all stack elements are removed.","name":"lua_settop","type":"c-api","def":"lua_settop"},{"doc":"`luaL_prepbuffsize`\n\n[-?, +?, m]\n\n~~~\nchar *luaL_prepbuffsize (luaL_Buffer *B, size_t sz);\n~~~\n\nReturns an address to a space of size `sz` where you can copy a string to be added to buffer `B` (see `luaL_Buffer`). After copying the string into this space you must call `luaL_addsize` with the size of the string to actually add it to the buffer.","name":"luaL_prepbuffsize","type":"c-api","def":"luaL_prepbuffsize"},{"doc":"`lua_setiuservalue`\n\n[-1, +0, –]\n\n~~~\nint lua_setiuservalue (lua_State *L, int index, int n);\n~~~\n\nPops a value from the stack and sets it as the new `n`-th user value associated to the full userdata at the given index. Returns 0 if the userdata does not have that value.","name":"lua_setiuservalue","type":"c-api","def":"lua_setiuservalue"},{"doc":"`luaL_newmetatable`\n\n[-0, +1, m]\n\n~~~\nint luaL_newmetatable (lua_State *L, const char *tname);\n~~~\n\nIf the registry already has the key `tname`, returns 0. Otherwise, creates a new table to be used as a metatable for userdata, adds to this new table the pair `__name = tname`, adds to the registry the pair `[tname] = new table`, and returns 1.\n\nIn both cases, the function pushes onto the stack the final value associated with `tname` in the registry.","name":"luaL_newmetatable","type":"c-api","def":"luaL_newmetatable"},{"doc":"`luaL_where`\n\n[-0, +1, m]\n\n~~~\nvoid luaL_where (lua_State *L, int lvl);\n~~~\n\nPushes onto the stack a string identifying the current position of the control at level `lvl` in the call stack. Typically this string has the following format:\n\n~~~\n\n chunkname:currentline:\n\n~~~\n\nLevel 0 is the running function, level 1 is the function that called the running function, etc.\n\nThis function is used to build a prefix for error messages.","name":"luaL_where","type":"c-api","def":"luaL_where"},{"doc":"`lua_Writer`\n\n~~~\ntypedef int (*lua_Writer) (lua_State *L,\n const void* p,\n size_t sz,\n void* ud);\n~~~\n\nThe type of the writer function used by `lua_dump`. Every time `lua_dump` produces another piece of chunk, it calls the writer, passing along the buffer to be written (`p`), its size (`sz`), and the `ud` parameter supplied to `lua_dump`.\n\nThe writer returns an error code: 0 means no errors; any other value means an error and stops `lua_dump` from calling the writer again.","name":"lua_Writer","type":"c-api","def":"lua_Writer"},{"doc":"`lua_tostring`\n\n[-0, +0, m]\n\n~~~\nconst char *lua_tostring (lua_State *L, int index);\n~~~\n\nEquivalent to `lua_tolstring` with `len` equal to `NULL`.","name":"lua_tostring","type":"c-api","def":"lua_tostring"},{"doc":"`lua_rawset`\n\n[-2, +0, m]\n\n~~~\nvoid lua_rawset (lua_State *L, int index);\n~~~\n\nSimilar to `lua_settable`, but does a raw assignment (i.e., without metamethods).","name":"lua_rawset","type":"c-api","def":"lua_rawset"},{"doc":"`lua_gc`\n\n[-0, +0, –]\n\n~~~\nint lua_gc (lua_State *L, int what, ...);\n~~~\n\nControls the garbage collector.\n\nThis function performs several tasks, according to the value of the parameter `what`. For options that need extra arguments, they are listed after the option.\n\n * `LUA_GCCOLLECT`: Performs a full garbage-collection cycle.\n\n * `LUA_GCSTOP`: Stops the garbage collector.\n\n * `LUA_GCRESTART`: Restarts the garbage collector.\n\n * `LUA_GCCOUNT`: Returns the current amount of memory (in Kbytes) in use by Lua.\n\n * `LUA_GCCOUNTB`: Returns the remainder of dividing the current amount of bytes of memory in use by Lua by 1024.\n\n * `LUA_GCSTEP` `(int stepsize)`: Performs an incremental step of garbage collection, corresponding to the allocation of `stepsize` Kbytes.\n\n * `LUA_GCISRUNNING`: Returns a boolean that tells whether the collector is running (i.e., not stopped).\n\n * `LUA_GCINC` (int pause, int stepmul, stepsize): Changes the collector to incremental mode with the given parameters (see §2.5.1). Returns the previous mode (`LUA_GCGEN` or `LUA_GCINC`).\n\n * `LUA_GCGEN` (int minormul, int majormul): Changes the collector to generational mode with the given parameters (see §2.5.2). Returns the previous mode (`LUA_GCGEN` or `LUA_GCINC`).\n\nFor more details about these options, see `collectgarbage`.","name":"lua_gc","type":"c-api","def":"lua_gc"},{"doc":"`lua_error`\n\n[-1, +0, v]\n\n~~~\nint lua_error (lua_State *L);\n~~~\n\nRaises a Lua error, using the value on the top of the stack as the error object. This function does a long jump, and therefore never returns (see `luaL_error`).","name":"lua_error","type":"c-api","def":"lua_error"},{"doc":"`luaL_checktype`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_checktype (lua_State *L, int arg, int t);\n~~~\n\nChecks whether the function argument `arg` has type `t`. See `lua_type` for the encoding of types for `t`.","name":"luaL_checktype","type":"c-api","def":"luaL_checktype"},{"doc":"`lua_tocfunction`\n\n[-0, +0, –]\n\n~~~\nlua_CFunction lua_tocfunction (lua_State *L, int index);\n~~~\n\nConverts a value at the given index to a C function. That value must be a C function; otherwise, returns `NULL`.","name":"lua_tocfunction","type":"c-api","def":"lua_tocfunction"},{"doc":"`luaL_unref`\n\n[-0, +0, –]\n\n~~~\nvoid luaL_unref (lua_State *L, int t, int ref);\n~~~\n\nReleases the reference `ref` from the table at index `t` (see `luaL_ref`). The entry is removed from the table, so that the referred object can be collected. The reference `ref` is also freed to be used again.\n\nIf `ref` is `LUA_NOREF` or `LUA_REFNIL`, `luaL_unref` does nothing.","name":"luaL_unref","type":"c-api","def":"luaL_unref"},{"doc":"`luaL_typename`\n\n[-0, +0, –]\n\n~~~\nconst char *luaL_typename (lua_State *L, int index);\n~~~\n\nReturns the name of the type of the value at the given index.","name":"luaL_typename","type":"c-api","def":"luaL_typename"},{"doc":"`luaL_typeerror`\n\n[-0, +0, v]\n\n~~~\nconst char *luaL_typeerror (lua_State *L,\n int arg,\n const char *tname);\n~~~\n\nRaises a type error for the argument `arg` of the C function that called it, using a standard message; `tname` is a \"name\" for the expected type. This function never returns.","name":"luaL_typeerror","type":"c-api","def":"luaL_typeerror"},{"doc":"`lua_islightuserdata`\n\n[-0, +0, –]\n\n~~~\nint lua_islightuserdata (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a light userdata, and 0 otherwise.","name":"lua_islightuserdata","type":"c-api","def":"lua_islightuserdata"},{"doc":"`luaL_testudata`\n\n[-0, +0, m]\n\n~~~\nvoid *luaL_testudata (lua_State *L, int arg, const char *tname);\n~~~\n\nThis function works like `luaL_checkudata`, except that, when the test fails, it returns `NULL` instead of raising an error.","name":"luaL_testudata","type":"c-api","def":"luaL_testudata"},{"doc":"`lua_remove`\n\n[-1, +0, –]\n\n~~~\nvoid lua_remove (lua_State *L, int index);\n~~~\n\nRemoves the element at the given valid index, shifting down the elements above this index to fill the gap. This function cannot be called with a pseudo-index, because a pseudo-index is not an actual stack position.","name":"lua_remove","type":"c-api","def":"lua_remove"},{"doc":"`luaL_checkstring`\n\n[-0, +0, v]\n\n~~~\nconst char *luaL_checkstring (lua_State *L, int arg);\n~~~\n\nChecks whether the function argument `arg` is a string and returns this string.\n\nThis function uses `lua_tolstring` to get its result, so all conversions and caveats of that function apply here.","name":"luaL_checkstring","type":"c-api","def":"luaL_checkstring"},{"doc":"`lua_insert`\n\n[-1, +1, –]\n\n~~~\nvoid lua_insert (lua_State *L, int index);\n~~~\n\nMoves the top element into the given valid index, shifting up the elements above this index to open space. This function cannot be called with a pseudo-index, because a pseudo-index is not an actual stack position.","name":"lua_insert","type":"c-api","def":"lua_insert"},{"doc":"`lua_typename`\n\n[-0, +0, –]\n\n~~~\nconst char *lua_typename (lua_State *L, int tp);\n~~~\n\nReturns the name of the type encoded by the value `tp`, which must be one the values returned by `lua_type`.","name":"lua_typename","type":"c-api","def":"lua_typename"},{"doc":"`luaL_loadstring`\n\n[-0, +1, –]\n\n~~~\nint luaL_loadstring (lua_State *L, const char *s);\n~~~\n\nLoads a string as a Lua chunk. This function uses `lua_load` to load the chunk in the zero-terminated string `s`.\n\nThis function returns the same results as `lua_load`.\n\nAlso as `lua_load`, this function only loads the chunk; it does not run it.","name":"luaL_loadstring","type":"c-api","def":"luaL_loadstring"},{"doc":"`lua_tothread`\n\n[-0, +0, –]\n\n~~~\nlua_State *lua_tothread (lua_State *L, int index);\n~~~\n\nConverts the value at the given index to a Lua thread (represented as `lua_State*`). This value must be a thread; otherwise, the function returns `NULL`.","name":"lua_tothread","type":"c-api","def":"lua_tothread"},{"doc":"`lua_resume`\n\n[-?, +?, –]\n\n~~~\nint lua_resume (lua_State *L, lua_State *from, int nargs,\n int *nresults);\n~~~\n\nStarts and resumes a coroutine in the given thread `L`.\n\nTo start a coroutine, you push the main function plus any arguments onto the empty stack of the thread. then you call `lua_resume`, with `nargs` being the number of arguments. This call returns when the coroutine suspends or finishes its execution. When it returns, `*nresults` is updated and the top of the stack contains the `*nresults` values passed to `lua_yield` or returned by the body function. `lua_resume` returns `LUA_YIELD` if the coroutine yields, `LUA_OK` if the coroutine finishes its execution without errors, or an error code in case of errors (see §4.4.1). In case of errors, the error object is on the top of the stack.\n\nTo resume a coroutine, you remove the `*nresults` yielded values from its stack, push the values to be passed as results from `yield`, and then call `lua_resume`.\n\nThe parameter `from` represents the coroutine that is resuming `L`. If there is no such coroutine, this parameter can be `NULL`.","name":"lua_resume","type":"c-api","def":"lua_resume"},{"doc":"`lua_absindex`\n\n[-0, +0, –]\n\n~~~\nint lua_absindex (lua_State *L, int idx);\n~~~\n\nConverts the acceptable index `idx` into an equivalent absolute index (that is, one that does not depend on the stack top).","name":"lua_absindex","type":"c-api","def":"lua_absindex"},{"doc":"`luaL_requiref`\n\n[-0, +1, e]\n\n~~~\nvoid luaL_requiref (lua_State *L, const char *modname,\n lua_CFunction openf, int glb);\n~~~\n\nIf `package.loaded[modname]` is not true, calls the function `openf` with the string `modname` as an argument and sets the call result to `package.loaded[modname]`, as if that function has been called through `require`.\n\nIf `glb` is true, also stores the module into the global `modname`.\n\nLeaves a copy of the module on the stack.","name":"luaL_requiref","type":"c-api","def":"luaL_requiref"},{"doc":"`luaL_ref`\n\n[-1, +0, m]\n\n~~~\nint luaL_ref (lua_State *L, int t);\n~~~\n\nCreates and returns a reference, in the table at index `t`, for the object on the top of the stack (and pops the object).\n\nA reference is a unique integer key. As long as you do not manually add integer keys into the table `t`, `luaL_ref` ensures the uniqueness of the key it returns. You can retrieve an object referred by the reference `r` by calling `lua_rawgeti(L, t, r)`. The function `luaL_unref` frees a reference.\n\nIf the object on the top of the stack is nil, `luaL_ref` returns the constant `LUA_REFNIL`. The constant `LUA_NOREF` is guaranteed to be different from any reference returned by `luaL_ref`.","name":"luaL_ref","type":"c-api","def":"luaL_ref"},{"doc":"`lua_rawlen`\n\n[-0, +0, –]\n\n~~~\nlua_Unsigned lua_rawlen (lua_State *L, int index);\n~~~\n\nReturns the raw \"length\" of the value at the given index: for strings, this is the string length; for tables, this is the result of the length operator ('`#`') with no metamethods; for userdata, this is the size of the block of memory allocated for the userdata. For other values, this call returns 0.","name":"lua_rawlen","type":"c-api","def":"lua_rawlen"},{"doc":"`luaL_argcheck`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_argcheck (lua_State *L,\n int cond,\n int arg,\n const char *extramsg);\n~~~\n\nChecks whether `cond` is true. If it is not, raises an error with a standard message (see `luaL_argerror`).","name":"luaL_argcheck","type":"c-api","def":"luaL_argcheck"},{"doc":"`luaL_pushresultsize`\n\n[-?, +1, m]\n\n~~~\nvoid luaL_pushresultsize (luaL_Buffer *B, size_t sz);\n~~~\n\nEquivalent to the sequence `luaL_addsize`, `luaL_pushresult`.","name":"luaL_pushresultsize","type":"c-api","def":"luaL_pushresultsize"},{"doc":"`lua_load`\n\n[-0, +1, –]\n\n~~~\nint lua_load (lua_State *L,\n lua_Reader reader,\n void *data,\n const char *chunkname,\n const char *mode);\n~~~\n\nLoads a Lua chunk without running it. If there are no errors, `lua_load` pushes the compiled chunk as a Lua function on top of the stack. Otherwise, it pushes an error message.\n\nThe `lua_load` function uses a user-supplied `reader` function to read the chunk (see `lua_Reader`). The `data` argument is an opaque value passed to the reader function.\n\nThe `chunkname` argument gives a name to the chunk, which is used for error messages and in debug information (see §4.7).\n\n`lua_load` automatically detects whether the chunk is text or binary and loads it accordingly (see program `luac`). The string `mode` works as in function `load`, with the addition that a `NULL` value is equivalent to the string \"`bt`\".\n\n`lua_load` uses the stack internally, so the reader function must always leave the stack unmodified when returning.\n\n`lua_load` can return `LUA_OK`, `LUA_ERRSYNTAX`, or `LUA_ERRMEM`. The function may also return other values corresponding to errors raised by the read function (see §4.4.1).\n\nIf the resulting function has upvalues, its first upvalue is set to the value of the global environment stored at index `LUA_RIDX_GLOBALS` in the registry (see §4.3). When loading main chunks, this upvalue will be the `_ENV` variable (see §2.2). Other upvalues are initialized with nil.","name":"lua_load","type":"c-api","def":"lua_load"},{"doc":"`lua_pushcfunction`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushcfunction (lua_State *L, lua_CFunction f);\n~~~\n\nPushes a C function onto the stack. This function is equivalent to `lua_pushcclosure` with no upvalues.","name":"lua_pushcfunction","type":"c-api","def":"lua_pushcfunction"},{"doc":"`luaL_loadfilex`\n\n[-0, +1, m]\n\n~~~\nint luaL_loadfilex (lua_State *L, const char *filename,\n const char *mode);\n~~~\n\nLoads a file as a Lua chunk. This function uses `lua_load` to load the chunk in the file named `filename`. If `filename` is `NULL`, then it loads from the standard input. The first line in the file is ignored if it starts with a `#`.\n\nThe string `mode` works as in the function `lua_load`.\n\nThis function returns the same results as `lua_load` or `LUA_ERRFILE` for file-related errors.\n\nAs `lua_load`, this function only loads the chunk; it does not run it.","name":"luaL_loadfilex","type":"c-api","def":"luaL_loadfilex"},{"doc":"`luaL_pushfail`\n\n[-0, +1, –]\n\n~~~\nvoid luaL_pushfail (lua_State *L);\n~~~\n\nPushes the fail value onto the stack (see §6).","name":"luaL_pushfail","type":"c-api","def":"luaL_pushfail"},{"doc":"`luaL_optstring`\n\n[-0, +0, v]\n\n~~~\nconst char *luaL_optstring (lua_State *L,\n int arg,\n const char *d);\n~~~\n\nIf the function argument `arg` is a string, returns this string. If this argument is absent or is nil, returns `d`. Otherwise, raises an error.","name":"luaL_optstring","type":"c-api","def":"luaL_optstring"},{"doc":"`luaL_Stream`\n\n~~~\ntypedef struct luaL_Stream {\n FILE *f;\n lua_CFunction closef; } luaL_Stream;\n~~~\n\nThe standard representation for file handles used by the standard I\/O library.\n\nA file handle is implemented as a full userdata, with a metatable called `LUA_FILEHANDLE` (where `LUA_FILEHANDLE` is a macro with the actual metatable's name). The metatable is created by the I\/O library (see `luaL_newmetatable`).\n\nThis userdata must start with the structure `luaL_Stream`; it can contain other data after this initial structure. The field `f` points to the corresponding C stream (or it can be `NULL` to indicate an incompletely created handle). The field `closef` points to a Lua function that will be called to close the stream when the handle is closed or collected; this function receives the file handle as its sole argument and must return either a true value, in case of success, or a false value plus an error message, in case of error. Once Lua calls this field, it changes the field value to `NULL` to signal that the handle is closed.","name":"luaL_Stream","type":"c-api","def":"luaL_Stream"},{"doc":"`luaL_optnumber`\n\n[-0, +0, v]\n\n~~~\nlua_Number luaL_optnumber (lua_State *L, int arg, lua_Number d);\n~~~\n\nIf the function argument `arg` is a number, returns this number as a `lua_Number`. If this argument is absent or is nil, returns `d`. Otherwise, raises an error.","name":"luaL_optnumber","type":"c-api","def":"luaL_optnumber"},{"doc":"`luaL_optlstring`\n\n[-0, +0, v]\n\n~~~\nconst char *luaL_optlstring (lua_State *L,\n int arg,\n const char *d,\n size_t *l);\n~~~\n\nIf the function argument `arg` is a string, returns this string. If this argument is absent or is nil, returns `d`. Otherwise, raises an error.\n\nIf `l` is not `NULL`, fills its referent with the result's length. If the result is `NULL` (only possible when returning `d` and `d == NULL`), its length is considered zero.\n\nThis function uses `lua_tolstring` to get its result, so all conversions and caveats of that function apply here.","name":"luaL_optlstring","type":"c-api","def":"luaL_optlstring"},{"doc":"`luaL_optinteger`\n\n[-0, +0, v]\n\n~~~\nlua_Integer luaL_optinteger (lua_State *L,\n int arg,\n lua_Integer d);\n~~~\n\nIf the function argument `arg` is an integer (or it is convertible to an integer), returns this integer. If this argument is absent or is nil, returns `d`. Otherwise, raises an error.","name":"luaL_optinteger","type":"c-api","def":"luaL_optinteger"},{"doc":"`luaL_opt`\n\n[-0, +0, –]\n\n~~~\nT luaL_opt (L, func, arg, dflt);\n~~~\n\nThis macro is defined as follows:\n\n~~~\n\n (lua_isnoneornil(L,(arg)) ? (dflt) : func(L,(arg)))\n\n~~~\n\nIn words, if the argument `arg` is nil or absent, the macro results in the default `dflt`. Otherwise, it results in the result of calling `func` with the state `L` and the argument index `arg` as arguments. Note that it evaluates the expression `dflt` only if needed.","name":"luaL_opt","type":"c-api","def":"luaL_opt"},{"doc":"`luaL_openlibs`\n\n[-0, +0, e]\n\n~~~\nvoid luaL_openlibs (lua_State *L);\n~~~\n\nOpens all standard Lua libraries into the given state.","name":"luaL_openlibs","type":"c-api","def":"luaL_openlibs"},{"doc":"`luaL_newstate`\n\n[-0, +0, –]\n\n~~~\nlua_State *luaL_newstate (void);\n~~~\n\nCreates a new Lua state. It calls `lua_newstate` with an allocator based on the standard C allocation functions and then sets a warning function and a panic function (see §4.4) that print messages to the standard error output.\n\nReturns the new state, or `NULL` if there is a memory allocation error.","name":"luaL_newstate","type":"c-api","def":"luaL_newstate"},{"doc":"`luaL_addstring`\n\n[-?, +?, m]\n\n~~~\nvoid luaL_addstring (luaL_Buffer *B, const char *s);\n~~~\n\nAdds the zero-terminated string pointed to by `s` to the buffer `B` (see `luaL_Buffer`).","name":"luaL_addstring","type":"c-api","def":"luaL_addstring"},{"doc":"`lua_setwarnf`\n\n[-0, +0, –]\n\n~~~\nvoid lua_setwarnf (lua_State *L, lua_WarnFunction f, void *ud);\n~~~\n\nSets the warning function to be used by Lua to emit warnings (see `lua_WarnFunction`). The `ud` parameter sets the value `ud` passed to the warning function.","name":"lua_setwarnf","type":"c-api","def":"lua_setwarnf"},{"doc":"`luaL_setfuncs`\n\n[-nup, +0, m]\n\n~~~\nvoid luaL_setfuncs (lua_State *L, const luaL_Reg *l, int nup);\n~~~\n\nRegisters all functions in the array `l` (see `luaL_Reg`) into the table on the top of the stack (below optional upvalues, see next).\n\nWhen `nup` is not zero, all functions are created with `nup` upvalues, initialized with copies of the `nup` values previously pushed on the stack on top of the library table. These values are popped from the stack after the registration.","name":"luaL_setfuncs","type":"c-api","def":"luaL_setfuncs"},{"doc":"`luaL_pushresult`\n\n[-?, +1, m]\n\n~~~\nvoid luaL_pushresult (luaL_Buffer *B);\n~~~\n\nFinishes the use of buffer `B` leaving the final string on the top of the stack.","name":"luaL_pushresult","type":"c-api","def":"luaL_pushresult"},{"doc":"`lua_Unsigned`\n\n~~~\ntypedef ... lua_Unsigned;\n~~~\n\nThe unsigned version of `lua_Integer`.","name":"lua_Unsigned","type":"c-api","def":"lua_Unsigned"},{"doc":"`luaL_loadfile`\n\n[-0, +1, m]\n\n~~~\nint luaL_loadfile (lua_State *L, const char *filename);\n~~~\n\nEquivalent to `luaL_loadfilex` with `mode` equal to `NULL`.","name":"luaL_loadfile","type":"c-api","def":"luaL_loadfile"},{"doc":"`luaL_loadbufferx`\n\n[-0, +1, –]\n\n~~~\nint luaL_loadbufferx (lua_State *L,\n const char *buff,\n size_t sz,\n const char *name,\n const char *mode);\n~~~\n\nLoads a buffer as a Lua chunk. This function uses `lua_load` to load the chunk in the buffer pointed to by `buff` with size `sz`.\n\nThis function returns the same results as `lua_load`. `name` is the chunk name, used for debug information and error messages. The string `mode` works as in the function `lua_load`.","name":"luaL_loadbufferx","type":"c-api","def":"luaL_loadbufferx"},{"doc":"`lua_pushvalue`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushvalue (lua_State *L, int index);\n~~~\n\nPushes a copy of the element at the given index onto the stack.","name":"lua_pushvalue","type":"c-api","def":"lua_pushvalue"},{"doc":"`lua_isstring`\n\n[-0, +0, –]\n\n~~~\nint lua_isstring (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a string or a number (which is always convertible to a string), and 0 otherwise.","name":"lua_isstring","type":"c-api","def":"lua_isstring"},{"doc":"`luaL_checkudata`\n\n[-0, +0, v]\n\n~~~\nvoid *luaL_checkudata (lua_State *L, int arg, const char *tname);\n~~~\n\nChecks whether the function argument `arg` is a userdata of the type `tname` (see `luaL_newmetatable`) and returns the userdata's memory-block address (see `lua_touserdata`).","name":"luaL_checkudata","type":"c-api","def":"luaL_checkudata"},{"doc":"`lua_newthread`\n\n[-0, +1, m]\n\n~~~\nlua_State *lua_newthread (lua_State *L);\n~~~\n\nCreates a new thread, pushes it on the stack, and returns a pointer to a `lua_State` that represents this new thread. The new thread returned by this function shares with the original thread its global environment, but has an independent execution stack.\n\nThreads are subject to garbage collection, like any Lua object.","name":"lua_newthread","type":"c-api","def":"lua_newthread"},{"doc":"`luaL_gsub`\n\n[-0, +1, m]\n\n~~~\nconst char *luaL_gsub (lua_State *L,\n const char *s,\n const char *p,\n const char *r);\n~~~\n\nCreates a copy of string `s`, replacing any occurrence of the string `p` with the string `r`. Pushes the resulting string on the stack and returns it.","name":"luaL_gsub","type":"c-api","def":"luaL_gsub"},{"doc":"`luaL_getsubtable`\n\n[-0, +1, e]\n\n~~~\nint luaL_getsubtable (lua_State *L, int idx, const char *fname);\n~~~\n\nEnsures that the value `t[fname]`, where `t` is the value at index `idx`, is a table, and pushes that table onto the stack. Returns true if it finds a previous table there and false if it creates a new table.","name":"luaL_getsubtable","type":"c-api","def":"luaL_getsubtable"},{"doc":"`luaL_getmetatable`\n\n[-0, +1, m]\n\n~~~\nint luaL_getmetatable (lua_State *L, const char *tname);\n~~~\n\nPushes onto the stack the metatable associated with the name `tname` in the registry (see `luaL_newmetatable`), or nil if there is no metatable associated with that name. Returns the type of the pushed value.","name":"luaL_getmetatable","type":"c-api","def":"luaL_getmetatable"},{"doc":"`luaL_getmetafield`\n\n[-0, +(0|1), m]\n\n~~~\nint luaL_getmetafield (lua_State *L, int obj, const char *e);\n~~~\n\nPushes onto the stack the field `e` from the metatable of the object at index `obj` and returns the type of the pushed value. If the object does not have a metatable, or if the metatable does not have this field, pushes nothing and returns `LUA_TNIL`.","name":"luaL_getmetafield","type":"c-api","def":"luaL_getmetafield"},{"doc":"`luaL_fileresult`\n\n[-0, +(1|3), m]\n\n~~~\nint luaL_fileresult (lua_State *L, int stat, const char *fname);\n~~~\n\nThis function produces the return values for file-related functions in the standard library (`io.open`, `os.rename`, `file:seek`, etc.).","name":"luaL_fileresult","type":"c-api","def":"luaL_fileresult"},{"doc":"`lua_CFunction`\n\n~~~\ntypedef int (*lua_CFunction) (lua_State *L);\n~~~\n\nType for C functions.\n\nIn order to communicate properly with Lua, a C function must use the following protocol, which defines the way parameters and results are passed: a C function receives its arguments from Lua in its stack in direct order (the first argument is pushed first). So, when the function starts, `lua_gettop(L)` returns the number of arguments received by the function. The first argument (if any) is at index 1 and its last argument is at index `lua_gettop(L)`. To return values to Lua, a C function just pushes them onto the stack, in direct order (the first result is pushed first), and returns in C the number of results. Any other value in the stack below the results will be properly discarded by Lua. Like a Lua function, a C function called by Lua can also return many results.\n\nAs an example, the following function receives a variable number of numeric arguments and returns their average and their sum:\n\n~~~\n\n static int foo (lua_State *L) {\n int n = lua_gettop(L); \/* number of arguments *\/\n lua_Number sum = 0.0;\n int i;\n for (i = 1; i <= n; i++) {\n if (!lua_isnumber(L, i)) {\n lua_pushliteral(L, \"incorrect argument\");\n lua_error(L);\n }\n sum += lua_tonumber(L, i);\n }\n lua_pushnumber(L, sum\/n); \/* first result *\/\n lua_pushnumber(L, sum); \/* second result *\/\n return 2; \/* number of results *\/\n }\n\n~~~","name":"lua_CFunction","type":"c-api","def":"lua_CFunction"},{"doc":"`luaL_loadbuffer`\n\n[-0, +1, –]\n\n~~~\nint luaL_loadbuffer (lua_State *L,\n const char *buff,\n size_t sz,\n const char *name);\n~~~\n\nEquivalent to `luaL_loadbufferx` with `mode` equal to `NULL`.","name":"luaL_loadbuffer","type":"c-api","def":"luaL_loadbuffer"},{"doc":"`luaL_checkversion`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_checkversion (lua_State *L);\n~~~\n\nChecks whether the code making the call and the Lua library being called are using the same version of Lua and the same numeric types.","name":"luaL_checkversion","type":"c-api","def":"luaL_checkversion"},{"doc":"`luaL_checkstack`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_checkstack (lua_State *L, int sz, const char *msg);\n~~~\n\nGrows the stack size to `top + sz` elements, raising an error if the stack cannot grow to that size. `msg` is an additional text to go into the error message (or `NULL` for no additional text).","name":"luaL_checkstack","type":"c-api","def":"luaL_checkstack"},{"doc":"`luaL_checkoption`\n\n[-0, +0, v]\n\n~~~\nint luaL_checkoption (lua_State *L,\n int arg,\n const char *def,\n const char *const lst[]);\n~~~\n\nChecks whether the function argument `arg` is a string and searches for this string in the array `lst` (which must be NULL-terminated). Returns the index in the array where the string was found. Raises an error if the argument is not a string or if the string cannot be found.\n\nIf `def` is not `NULL`, the function uses `def` as a default value when there is no argument `arg` or when this argument is nil.\n\nThis is a useful function for mapping strings to C enums. (The usual convention in Lua libraries is to use strings instead of numbers to select options.)","name":"luaL_checkoption","type":"c-api","def":"luaL_checkoption"},{"doc":"`luaL_checknumber`\n\n[-0, +0, v]\n\n~~~\nlua_Number luaL_checknumber (lua_State *L, int arg);\n~~~\n\nChecks whether the function argument `arg` is a number and returns this number converted to a `lua_Number`.","name":"luaL_checknumber","type":"c-api","def":"luaL_checknumber"},{"doc":"`lua_isnone`\n\n[-0, +0, –]\n\n~~~\nint lua_isnone (lua_State *L, int index);\n~~~\n\nReturns 1 if the given index is not valid, and 0 otherwise.","name":"lua_isnone","type":"c-api","def":"lua_isnone"},{"doc":"`lua_setlocal`\n\n[-(0|1), +0, –]\n\n~~~\nconst char *lua_setlocal (lua_State *L, const lua_Debug *ar, int n);\n~~~\n\nSets the value of a local variable of a given activation record. It assigns the value on the top of the stack to the variable and returns its name. It also pops the value from the stack.\n\nReturns `NULL` (and pops nothing) when the index is greater than the number of active local variables.\n\nParameters `ar` and `n` are as in the function `lua_getlocal`.","name":"lua_setlocal","type":"c-api","def":"lua_setlocal"},{"doc":"`luaL_checkany`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_checkany (lua_State *L, int arg);\n~~~\n\nChecks whether the function has an argument of any type (including nil) at position `arg`.","name":"luaL_checkany","type":"c-api","def":"luaL_checkany"},{"doc":"`lua_newstate`\n\n[-0, +0, –]\n\n~~~\nlua_State *lua_newstate (lua_Alloc f, void *ud);\n~~~\n\nCreates a new independent state and returns its main thread. Returns `NULL` if it cannot create the state (due to lack of memory). The argument `f` is the allocator function; Lua will do all memory allocation for this state through this function (see `lua_Alloc`). The second argument, `ud`, is an opaque pointer that Lua passes to the allocator in every call.","name":"lua_newstate","type":"c-api","def":"lua_newstate"},{"doc":"`luaL_buffsub`\n\n[-0, +0, –]\n\n~~~\nvoid luaL_buffsub (luaL_Buffer *B, int n);\n~~~\n\nRemoves `n` bytes from the the buffer `B` (see `luaL_Buffer`). The buffer must have at least that many bytes.","name":"luaL_buffsub","type":"c-api","def":"luaL_buffsub"},{"doc":"`luaL_bufflen`\n\n[-0, +0, –]\n\n~~~\nsize_t luaL_bufflen (luaL_Buffer *B);\n~~~\n\nReturns the length of the current content of buffer `B` (see `luaL_Buffer`).","name":"luaL_bufflen","type":"c-api","def":"luaL_bufflen"},{"doc":"`luaL_buffinit`\n\n[-0, +0, –]\n\n~~~\nvoid luaL_buffinit (lua_State *L, luaL_Buffer *B);\n~~~\n\nInitializes a buffer `B` (see `luaL_Buffer`). This function does not allocate any space; the buffer must be declared as a variable.","name":"luaL_buffinit","type":"c-api","def":"luaL_buffinit"},{"doc":"`luaL_prepbuffer`\n\n[-?, +?, m]\n\n~~~\nchar *luaL_prepbuffer (luaL_Buffer *B);\n~~~\n\nEquivalent to `luaL_prepbuffsize` with the predefined size `LUAL_BUFFERSIZE`.","name":"luaL_prepbuffer","type":"c-api","def":"luaL_prepbuffer"},{"doc":"`luaL_addvalue`\n\n[-1, +?, m]\n\n~~~\nvoid luaL_addvalue (luaL_Buffer *B);\n~~~\n\nAdds the value on the top of the stack to the buffer `B` (see `luaL_Buffer`). Pops the value.\n\nThis is the only function on string buffers that can (and must) be called with an extra element on the stack, which is the value to be added to the buffer.","name":"luaL_addvalue","type":"c-api","def":"luaL_addvalue"},{"doc":"`luaL_newlibtable`\n\n[-0, +1, m]\n\n~~~\nvoid luaL_newlibtable (lua_State *L, const luaL_Reg l[]);\n~~~\n\nCreates a new table with a size optimized to store all entries in the array `l` (but does not actually store them). It is intended to be used in conjunction with `luaL_setfuncs` (see `luaL_newlib`).\n\nIt is implemented as a macro. The array `l` must be the actual array, not a pointer to it.","name":"luaL_newlibtable","type":"c-api","def":"luaL_newlibtable"},{"doc":"`lua_atpanic`\n\n[-0, +0, –]\n\n~~~\nlua_CFunction lua_atpanic (lua_State *L, lua_CFunction panicf);\n~~~\n\nSets a new panic function and returns the old one (see §4.4).","name":"lua_atpanic","type":"c-api","def":"lua_atpanic"},{"doc":"`luaL_addlstring`\n\n[-?, +?, m]\n\n~~~\nvoid luaL_addlstring (luaL_Buffer *B, const char *s, size_t l);\n~~~\n\nAdds the string pointed to by `s` with length `l` to the buffer `B` (see `luaL_Buffer`). The string can contain embedded zeros.","name":"luaL_addlstring","type":"c-api","def":"luaL_addlstring"},{"doc":"`luaL_addgsub`\n\n[-0, +0, m]\n\n~~~\nconst void luaL_addgsub (luaL_Buffer *B, const char *s,\n const char *p, const char *r);\n~~~\n\nAdds a copy of the string `s` to the buffer `B` (see `luaL_Buffer`), replacing any occurrence of the string `p` with the string `r`.","name":"luaL_addgsub","type":"c-api","def":"luaL_addgsub"},{"doc":"`luaL_addchar`\n\n[-?, +?, m]\n\n~~~\nvoid luaL_addchar (luaL_Buffer *B, char c);\n~~~\n\nAdds the byte `c` to the buffer `B` (see `luaL_Buffer`).","name":"luaL_addchar","type":"c-api","def":"luaL_addchar"},{"doc":"`luaL_argexpected`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_argexpected (lua_State *L,\n int cond,\n int arg,\n const char *tname);\n~~~\n\nChecks whether `cond` is true. If it is not, raises an error about the type of the argument `arg` with a standard message (see `luaL_typeerror`).","name":"luaL_argexpected","type":"c-api","def":"luaL_argexpected"},{"doc":"`lua_pushvfstring`\n\n[-0, +1, v]\n\n~~~\nconst char *lua_pushvfstring (lua_State *L,\n const char *fmt,\n va_list argp);\n~~~\n\nEquivalent to `lua_pushfstring`, except that it receives a `va_list` instead of a variable number of arguments.","name":"lua_pushvfstring","type":"c-api","def":"lua_pushvfstring"},{"doc":"the value of the environment variable `LUA_PATH_5_4` or the environment variable `LUA_PATH` or with a default path defined in `luaconf.h`, if those environment variables are not defined. A \"`;;`\" in the value of the environment variable is replaced by the default path.","name":"LUA_PATH_5_4","type":"c-api","def":"LUA_PATH_5_4"},{"doc":"`lua_resetthread`\n\n[-0, +?, –]\n\n~~~\nint lua_resetthread (lua_State *L);\n~~~\n\nResets a thread, cleaning its call stack and closing all pending to-be-closed variables. Returns a status code: `LUA_OK` for no errors in closing methods, or an error status otherwise. In case of error, leaves the error object on the top of the stack,","name":"lua_resetthread","type":"c-api","def":"lua_resetthread"},{"doc":"`lua_pushthread`\n\n[-0, +1, –]\n\n~~~\nint lua_pushthread (lua_State *L);\n~~~\n\nPushes the thread represented by `L` onto the stack. Returns 1 if this thread is the main thread of its state.","name":"lua_pushthread","type":"c-api","def":"lua_pushthread"},{"doc":"`lua_yield`\n\n[-?, +?, v]\n\n~~~\nint lua_yield (lua_State *L, int nresults);\n~~~\n\nThis function is equivalent to `lua_yieldk`, but it has no continuation (see §4.5). Therefore, when the thread resumes, it continues the function that called the function calling `lua_yield`. To avoid surprises, this function should be called only in a tail call.","name":"lua_yield","type":"c-api","def":"lua_yield"},{"doc":"`lua_xmove`\n\n[-?, +?, –]\n\n~~~\nvoid lua_xmove (lua_State *from, lua_State *to, int n);\n~~~\n\nExchange values between different threads of the same state.\n\nThis function pops `n` values from the stack `from`, and pushes them onto the stack `to`.","name":"lua_xmove","type":"c-api","def":"lua_xmove"},{"doc":"`lua_newuserdatauv`\n\n[-0, +1, m]\n\n~~~\nvoid *lua_newuserdatauv (lua_State *L, size_t size, int nuvalue);\n~~~\n\nThis function creates and pushes on the stack a new full userdata, with `nuvalue` associated Lua values, called `user values`, plus an associated block of raw memory with `size` bytes. (The user values can be set and read with the functions `lua_setiuservalue` and `lua_getiuservalue`.)\n\nThe function returns the address of the block of memory.","name":"lua_newuserdatauv","type":"c-api","def":"lua_newuserdatauv"},{"doc":"`lua_warning`\n\n[-0, +0, –]\n\n~~~\nvoid lua_warning (lua_State *L, const char *msg, int tocont);\n~~~\n\nEmits a warning with the given message. A message in a call with `tocont` true should be continued in another call to this function.\n\nSee `warn` for more details about warnings.","name":"lua_warning","type":"c-api","def":"lua_warning"},{"doc":"`lua_version`\n\n[-0, +0, –]\n\n~~~\nlua_Number lua_version (lua_State *L);\n~~~\n\nReturns the version number of this core.","name":"lua_version","type":"c-api","def":"lua_version"},{"doc":"`lua_next`\n\n[-1, +(2|0), v]\n\n~~~\nint lua_next (lua_State *L, int index);\n~~~\n\nPops a key from the stack, and pushes a key–value pair from the table at the given index, the \"next\" pair after the given key. If there are no more elements in the table, then `lua_next` returns 0 and pushes nothing.\n\nA typical table traversal looks like this:\n\n~~~\n\n \/* table is in the stack at index 't' *\/\n lua_pushnil(L); \/* first key *\/\n while (lua_next(L, t) != 0) {\n \/* uses 'key' (at index -2) and 'value' (at index -1) *\/\n printf(\"%s - %s\\n\",\n lua_typename(L, lua_type(L, -2)),\n lua_typename(L, lua_type(L, -1)));\n \/* removes 'value'; keeps 'key' for next iteration *\/\n lua_pop(L, 1);\n }\n\n~~~\n\nWhile traversing a table, avoid calling `lua_tolstring` directly on a key, unless you know that the key is actually a string. Recall that `lua_tolstring` may change the value at the given index; this confuses the next call to `lua_next`.\n\nThis function may raise an error if the given key is neither nil nor present in the table. See function `next` for the caveats of modifying the table during its traversal.","name":"lua_next","type":"c-api","def":"lua_next"},{"doc":"`lua_settable`\n\n[-2, +0, e]\n\n~~~\nvoid lua_settable (lua_State *L, int index);\n~~~\n\nDoes the equivalent to `t[k] = v`, where `t` is the value at the given index, `v` is the value on the top of the stack, and `k` is the value just below the top.\n\nThis function pops both the key and the value from the stack. As in Lua, this function may trigger a metamethod for the \"newindex\" event (see §2.4).","name":"lua_settable","type":"c-api","def":"lua_settable"},{"doc":"`lua_upvalueindex`\n\n[-0, +0, –]\n\n~~~\nint lua_upvalueindex (int i);\n~~~\n\nReturns the pseudo-index that represents the `i`-th upvalue of the running function (see §4.2). `i` must be in the range [1,256].","name":"lua_upvalueindex","type":"c-api","def":"lua_upvalueindex"},{"doc":"`lua_touserdata`\n\n[-0, +0, –]\n\n~~~\nvoid *lua_touserdata (lua_State *L, int index);\n~~~\n\nIf the value at the given index is a full userdata, returns its memory-block address. If the value is a light userdata, returns its value (a pointer). Otherwise, returns `NULL`.","name":"lua_touserdata","type":"c-api","def":"lua_touserdata"},{"doc":"`lua_topointer`\n\n[-0, +0, –]\n\n~~~\nconst void *lua_topointer (lua_State *L, int index);\n~~~\n\nConverts the value at the given index to a generic C pointer (`void*`). The value can be a userdata, a table, a thread, a string, or a function; otherwise, `lua_topointer` returns `NULL`. Different objects will give different pointers. There is no way to convert the pointer back to its original value.\n\nTypically this function is used only for hashing and debug information.","name":"lua_topointer","type":"c-api","def":"lua_topointer"},{"doc":"`lua_tonumberx`\n\n[-0, +0, –]\n\n~~~\nlua_Number lua_tonumberx (lua_State *L, int index, int *isnum);\n~~~\n\nConverts the Lua value at the given index to the C type `lua_Number` (see `lua_Number`). The Lua value must be a number or a string convertible to a number (see §3.4.3); otherwise, `lua_tonumberx` returns 0.\n\nIf `isnum` is not `NULL`, its referent is assigned a boolean value that indicates whether the operation succeeded.","name":"lua_tonumberx","type":"c-api","def":"lua_tonumberx"},{"doc":"`lua_tointegerx`\n\n[-0, +0, –]\n\n~~~\nlua_Integer lua_tointegerx (lua_State *L, int index, int *isnum);\n~~~\n\nConverts the Lua value at the given index to the signed integral type `lua_Integer`. The Lua value must be an integer, or a number or string convertible to an integer (see §3.4.3); otherwise, `lua_tointegerx` returns 0.\n\nIf `isnum` is not `NULL`, its referent is assigned a boolean value that indicates whether the operation succeeded.","name":"lua_tointegerx","type":"c-api","def":"lua_tointegerx"},{"doc":"`lua_Debug`\n\n~~~\ntypedef struct lua_Debug {\n int event;\n const char *name; \/* (n) *\/\n const char *namewhat; \/* (n) *\/\n const char *what; \/* (S) *\/\n const char *source; \/* (S) *\/\n size_t srclen; \/* (S) *\/\n int currentline; \/* (l) *\/\n int linedefined; \/* (S) *\/\n int lastlinedefined; \/* (S) *\/\n unsigned char nups; \/* (u) number of upvalues *\/\n unsigned char nparams; \/* (u) number of parameters *\/\n char isvararg; \/* (u) *\/\n char istailcall; \/* (t) *\/\n unsigned short ftransfer; \/* (r) index of first value transferred *\/\n unsigned short ntransfer; \/* (r) number of transferred values *\/\n char short_src[LUA_IDSIZE]; \/* (S) *\/\n \/* private part *\/\n other fields } lua_Debug;\n~~~\n\nA structure used to carry different pieces of information about a function or an activation record. `lua_getstack` fills only the private part of this structure, for later use. To fill the other fields of `lua_Debug` with useful information, you must call `lua_getinfo`.\n\nThe fields of `lua_Debug` have the following meaning:\n\n * `source`: the source of the chunk that created the function. If `source` starts with a '`@`', it means that the function was defined in a file where the file name follows the '`@`'. If `source` starts with a '`=`', the remainder of its contents describes the source in a user-dependent manner. Otherwise, the function was defined in a string where `source` is that string.\n\n * `srclen`: The length of the string `source`.\n\n * `short_src`: a \"printable\" version of `source`, to be used in error messages.\n\n * `linedefined`: the line number where the definition of the function starts.\n\n * `lastlinedefined`: the line number where the definition of the function ends.\n\n * `what`: the string `\"Lua\"` if the function is a Lua function, `\"C\"` if it is a C function, `\"main\"` if it is the main part of a chunk.\n\n * `currentline`: the current line where the given function is executing. When no line information is available, `currentline` is set to -1.\n\n * `name`: a reasonable name for the given function. Because functions in Lua are first-class values, they do not have a fixed name: some functions can be the value of multiple global variables, while others can be stored only in a table field. The `lua_getinfo` function checks how the function was called to find a suitable name. If it cannot find a name, then `name` is set to `NULL`.\n\n * `namewhat`: explains the `name` field. The value of `namewhat` can be `\"global\"`, `\"local\"`, `\"method\"`, `\"field\"`, `\"upvalue\"`, or `\"\"` (the empty string), according to how the function was called. (Lua uses the empty string when no other option seems to apply.)\n\n * `istailcall`: true if this function invocation was called by a tail call. In this case, the caller of this level is not in the stack.\n\n * `nups`: the number of upvalues of the function.\n\n * `nparams`: the number of parameters of the function (always 0 for C functions).\n\n * `isvararg`: true if the function is a vararg function (always true for C functions).\n\n * `ftransfer`: the index on the stack of the first value being \"transferred\", that is, parameters in a call or return values in a return. (The other values are in consecutive indices.) Using this index, you can access and modify these values through `lua_getlocal` and `lua_setlocal`. This field is only meaningful during a call hook, denoting the first parameter, or a return hook, denoting the first value being returned. (For call hooks, this value is always 1.)\n\n * `ntransfer`: The number of values being transferred (see previous item). (For calls of Lua functions, this value is always equal to `nparams`.)","name":"lua_Debug","type":"c-api","def":"lua_Debug"},{"doc":"`lua_tointeger`\n\n[-0, +0, –]\n\n~~~\nlua_Integer lua_tointeger (lua_State *L, int index);\n~~~\n\nEquivalent to `lua_tointegerx` with `isnum` equal to `NULL`.","name":"lua_tointeger","type":"c-api","def":"lua_tointeger"},{"doc":"`lua_dump`\n\n[-0, +0, –]\n\n~~~\nint lua_dump (lua_State *L,\n lua_Writer writer,\n void *data,\n int strip);\n~~~\n\nDumps a function as a binary chunk. Receives a Lua function on the top of the stack and produces a binary chunk that, if loaded again, results in a function equivalent to the one dumped. As it produces parts of the chunk, `lua_dump` calls function `writer` (see `lua_Writer`) with the given `data` to write them.\n\nIf `strip` is true, the binary representation may not include all debug information about the function, to save space.\n\nThe value returned is the error code returned by the last call to the writer; 0 means no errors.\n\nThis function does not pop the Lua function from the stack.","name":"lua_dump","type":"c-api","def":"lua_dump"},{"doc":"`lua_toboolean`\n\n[-0, +0, –]\n\n~~~\nint lua_toboolean (lua_State *L, int index);\n~~~\n\nConverts the Lua value at the given index to a C boolean value (0 or 1). Like all tests in Lua, `lua_toboolean` returns true for any Lua value different from false and nil; otherwise it returns false. (If you want to accept only actual boolean values, use `lua_isboolean` to test the value's type.)","name":"lua_toboolean","type":"c-api","def":"lua_toboolean"},{"doc":"`lua_stringtonumber`\n\n[-0, +1, –]\n\n~~~\nsize_t lua_stringtonumber (lua_State *L, const char *s);\n~~~\n\nConverts the zero-terminated string `s` to a number, pushes that number into the stack, and returns the total size of the string, that is, its length plus one. The conversion can result in an integer or a float, according to the lexical conventions of Lua (see §3.1). The string may have leading and trailing whitespaces and a sign. If the string is not a valid numeral, returns 0 and pushes nothing. (Note that the result can be used as a boolean, true if the conversion succeeds.)","name":"lua_stringtonumber","type":"c-api","def":"lua_stringtonumber"},{"doc":"`lua_concat`\n\n[-n, +1, e]\n\n~~~\nvoid lua_concat (lua_State *L, int n);\n~~~\n\nConcatenates the `n` values at the top of the stack, pops them, and leaves the result on the top. If `n` is 1, the result is the single value on the stack (that is, the function does nothing); if `n` is 0, the result is the empty string. Concatenation is performed following the usual semantics of Lua (see §3.4.6).","name":"lua_concat","type":"c-api","def":"lua_concat"},{"doc":"`lua_status`\n\n[-0, +0, –]\n\n~~~\nint lua_status (lua_State *L);\n~~~\n\nReturns the status of the thread `L`.\n\nThe status can be `LUA_OK` for a normal thread, an error code if the thread finished the execution of a `lua_resume` with an error, or `LUA_YIELD` if the thread is suspended.\n\nYou can call functions only in threads with status `LUA_OK`. You can resume threads with status `LUA_OK` (to start a new coroutine) or `LUA_YIELD` (to resume a coroutine).","name":"lua_status","type":"c-api","def":"lua_status"},{"doc":"`luaL_newlib`\n\n[-0, +1, m]\n\n~~~\nvoid luaL_newlib (lua_State *L, const luaL_Reg l[]);\n~~~\n\nCreates a new table and registers there the functions in the list `l`.\n\nIt is implemented as the following macro:\n\n~~~\n\n (luaL_newlibtable(L,l), luaL_setfuncs(L,l,0))\n\n~~~\n\nThe array `l` must be the actual array, not a pointer to it.","name":"luaL_newlib","type":"c-api","def":"luaL_newlib"},{"doc":"`lua_geti`\n\n[-0, +1, e]\n\n~~~\nint lua_geti (lua_State *L, int index, lua_Integer i);\n~~~\n\nPushes onto the stack the value `t[i]`, where `t` is the value at the given index. As in Lua, this function may trigger a metamethod for the \"index\" event (see §2.4).\n\nReturns the type of the pushed value.","name":"lua_geti","type":"c-api","def":"lua_geti"},{"doc":"`lua_isnoneornil`\n\n[-0, +0, –]\n\n~~~\nint lua_isnoneornil (lua_State *L, int index);\n~~~\n\nReturns 1 if the given index is not valid or if the value at this index is nil, and 0 otherwise.","name":"lua_isnoneornil","type":"c-api","def":"lua_isnoneornil"},{"doc":"`lua_setmetatable`\n\n[-1, +0, –]\n\n~~~\nint lua_setmetatable (lua_State *L, int index);\n~~~\n\nPops a table or nil from the stack and sets that value as the new metatable for the value at the given index. (nil means no metatable.)\n\n(For historical reasons, this function returns an `int`, which now is always 1.)","name":"lua_setmetatable","type":"c-api","def":"lua_setmetatable"},{"doc":"`lua_seti`\n\n[-1, +0, e]\n\n~~~\nvoid lua_seti (lua_State *L, int index, lua_Integer n);\n~~~\n\nDoes the equivalent to `t[n] = v`, where `t` is the value at the given index and `v` is the value on the top of the stack.\n\nThis function pops the value from the stack. As in Lua, this function may trigger a metamethod for the \"newindex\" event (see §2.4).","name":"lua_seti","type":"c-api","def":"lua_seti"},{"doc":"`lua_sethook`\n\n[-0, +0, –]\n\n~~~\nvoid lua_sethook (lua_State *L, lua_Hook f, int mask, int count);\n~~~\n\nSets the debugging hook function.\n\nArgument `f` is the hook function. `mask` specifies on which events the hook will be called: it is formed by a bitwise OR of the constants `LUA_MASKCALL`, `LUA_MASKRET`, `LUA_MASKLINE`, and `LUA_MASKCOUNT`. The `count` argument is only meaningful when the mask includes `LUA_MASKCOUNT`. For each event, the hook is called as explained below:\n\n * The call hook: is called when the interpreter calls a function. The hook is called just after Lua enters the new function, before the function gets its arguments.\n\n * The return hook: is called when the interpreter returns from a function. The hook is called just before Lua leaves the function.\n\n * The line hook: is called when the interpreter is about to start the execution of a new line of code, or when it jumps back in the code (even to the same line). This event only happens while Lua is executing a Lua function.\n\n * The count hook: is called after the interpreter executes every `count` instructions. This event only happens while Lua is executing a Lua function.\n\nHooks are disabled by setting `mask` to zero.","name":"lua_sethook","type":"c-api","def":"lua_sethook"},{"doc":"`lua_upvalueid`\n\n[-0, +0, –]\n\n~~~\nvoid *lua_upvalueid (lua_State *L, int funcindex, int n);\n~~~\n\nReturns a unique identifier for the upvalue numbered `n` from the closure at index `funcindex`.\n\nThese unique identifiers allow a program to check whether different closures share upvalues. Lua closures that share an upvalue (that is, that access a same external local variable) will return identical ids for those upvalue indices.\n\nParameters `funcindex` and `n` are as in the function `lua_getupvalue`, but `n` cannot be greater than the number of upvalues.","name":"lua_upvalueid","type":"c-api","def":"lua_upvalueid"},{"doc":"`lua_setcstacklimit`\n\n[-0, +0, –]\n\n~~~\nint (lua_setcstacklimit) (lua_State *L, unsigned int limit);\n~~~\n\nSets a new limit for the C stack. This limit controls how deeply nested calls can go in Lua, with the intent of avoiding a stack overflow. Returns the old limit in case of success, or zero in case of error. For more details about this function, see `debug.setcstacklimit`, its equivalent in the standard library.","name":"lua_setcstacklimit","type":"c-api","def":"lua_setcstacklimit"},{"doc":"`lua_setallocf`\n\n[-0, +0, –]\n\n~~~\nvoid lua_setallocf (lua_State *L, lua_Alloc f, void *ud);\n~~~\n\nChanges the allocator function of a given state to `f` with user data `ud`.","name":"lua_setallocf","type":"c-api","def":"lua_setallocf"},{"doc":"`lua_getiuservalue`\n\n[-0, +1, –]\n\n~~~\nint lua_getiuservalue (lua_State *L, int index, int n);\n~~~\n\nPushes onto the stack the `n`-th user value associated with the full userdata at the given index and returns the type of the pushed value.\n\nIf the userdata does not have that value, pushes nil and returns `LUA_TNONE`.","name":"lua_getiuservalue","type":"c-api","def":"lua_getiuservalue"},{"doc":"`lua_pushliteral`\n\n[-0, +1, m]\n\n~~~\nconst char *lua_pushliteral (lua_State *L, const char *s);\n~~~\n\nThis macro is equivalent to `lua_pushstring`, but should be used only when `s` is a literal string. (Lua may optimize this case.)","name":"lua_pushliteral","type":"c-api","def":"lua_pushliteral"},{"doc":"`lua_isfunction`\n\n[-0, +0, –]\n\n~~~\nint lua_isfunction (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a function (either C or Lua), and 0 otherwise.","name":"lua_isfunction","type":"c-api","def":"lua_isfunction"},{"doc":"`lua_rotate`\n\n[-0, +0, –]\n\n~~~\nvoid lua_rotate (lua_State *L, int idx, int n);\n~~~\n\nRotates the stack elements between the valid index `idx` and the top of the stack. The elements are rotated `n` positions in the direction of the top, for a positive `n`, or `-n` positions in the direction of the bottom, for a negative `n`. The absolute value of `n` must not be greater than the size of the slice being rotated. This function cannot be called with a pseudo-index, because a pseudo-index is not an actual stack position.","name":"lua_rotate","type":"c-api","def":"lua_rotate"},{"doc":"`luaL_setmetatable`\n\n[-0, +0, –]\n\n~~~\nvoid luaL_setmetatable (lua_State *L, const char *tname);\n~~~\n\nSets the metatable of the object on the top of the stack as the metatable associated with name `tname` in the registry (see `luaL_newmetatable`).","name":"luaL_setmetatable","type":"c-api","def":"luaL_setmetatable"},{"doc":"`luaL_execresult`\n\n[-0, +3, m]\n\n~~~\nint luaL_execresult (lua_State *L, int stat);\n~~~\n\nThis function produces the return values for process-related functions in the standard library (`os.execute` and `io.close`).","name":"luaL_execresult","type":"c-api","def":"luaL_execresult"},{"doc":"`lua_getfield`\n\n[-0, +1, e]\n\n~~~\nint lua_getfield (lua_State *L, int index, const char *k);\n~~~\n\nPushes onto the stack the value `t[k]`, where `t` is the value at the given index. As in Lua, this function may trigger a metamethod for the \"index\" event (see §2.4).\n\nReturns the type of the pushed value.","name":"lua_getfield","type":"c-api","def":"lua_getfield"},{"doc":"`lua_rawseti`\n\n[-1, +0, m]\n\n~~~\nvoid lua_rawseti (lua_State *L, int index, lua_Integer i);\n~~~\n\nDoes the equivalent of `t[i] = v`, where `t` is the table at the given index and `v` is the value on the top of the stack.\n\nThis function pops the value from the stack. The assignment is raw, that is, it does not use the `__newindex` metavalue.","name":"lua_rawseti","type":"c-api","def":"lua_rawseti"},{"doc":"`lua_rawgetp`\n\n[-0, +1, –]\n\n~~~\nint lua_rawgetp (lua_State *L, int index, const void *p);\n~~~\n\nPushes onto the stack the value `t[k]`, where `t` is the table at the given index and `k` is the pointer `p` represented as a light userdata. The access is raw; that is, it does not use the `__index` metavalue.\n\nReturns the type of the pushed value.","name":"lua_rawgetp","type":"c-api","def":"lua_rawgetp"},{"doc":"`lua_rawgeti`\n\n[-0, +1, –]\n\n~~~\nint lua_rawgeti (lua_State *L, int index, lua_Integer n);\n~~~\n\nPushes onto the stack the value `t[n]`, where `t` is the table at the given index. The access is raw, that is, it does not use the `__index` metavalue.\n\nReturns the type of the pushed value.","name":"lua_rawgeti","type":"c-api","def":"lua_rawgeti"},{"doc":"`lua_Reader`\n\n~~~\ntypedef const char * (*lua_Reader) (lua_State *L,\n void *data,\n size_t *size);\n~~~\n\nThe reader function used by `lua_load`. Every time `lua_load` needs another piece of the chunk, it calls the reader, passing along its `data` parameter. The reader must return a pointer to a block of memory with a new piece of the chunk and set `size` to the block size. The block must exist until the reader function is called again. To signal the end of the chunk, the reader must return `NULL` or set `size` to zero. The reader function may return pieces of any size greater than zero.","name":"lua_Reader","type":"c-api","def":"lua_Reader"},{"doc":"`lua_Integer`\n\n~~~\ntypedef ... lua_Integer;\n~~~\n\nThe type of integers in Lua.\n\nBy default this type is `long long`, (usually a 64-bit two-complement integer), but that can be changed to `long` or `int` (usually a 32-bit two-complement integer). (See `LUA_INT_TYPE` in `luaconf.h`.)\n\nLua also defines the constants `LUA_MININTEGER` and `LUA_MAXINTEGER`, with the minimum and the maximum values that fit in this type.","name":"lua_Integer","type":"c-api","def":"lua_Integer"},{"doc":"`luaL_Reg`\n\n~~~\ntypedef struct luaL_Reg {\n const char *name;\n lua_CFunction func; } luaL_Reg;\n~~~\n\nType for arrays of functions to be registered by `luaL_setfuncs`. `name` is the function name and `func` is a pointer to the function. Any array of `luaL_Reg` must end with a sentinel entry in which both `name` and `func` are `NULL`.","name":"luaL_Reg","type":"c-api","def":"luaL_Reg"},{"doc":"`lua_yieldk`\n\n[-?, +?, v]\n\n~~~\nint lua_yieldk (lua_State *L,\n int nresults,\n lua_KContext ctx,\n lua_KFunction k);\n~~~\n\nYields a coroutine (thread).\n\nWhen a C function calls `lua_yieldk`, the running coroutine suspends its execution, and the call to `lua_resume` that started this coroutine returns. The parameter `nresults` is the number of values from the stack that will be passed as results to `lua_resume`.\n\nWhen the coroutine is resumed again, Lua calls the given continuation function `k` to continue the execution of the C function that yielded (see §4.5). This continuation function receives the same stack from the previous function, with the `n` results removed and replaced by the arguments passed to `lua_resume`. Moreover, the continuation function receives the value `ctx` that was passed to `lua_yieldk`.\n\nUsually, this function does not return; when the coroutine eventually resumes, it continues executing the continuation function. However, there is one special case, which is when this function is called from inside a line or a count hook (see §4.7). In that case, `lua_yieldk` should be called with no continuation (probably in the form of `lua_yield`) and no results, and the hook should return immediately after the call. Lua will yield and, when the coroutine resumes again, it will continue the normal execution of the (Lua) function that triggered the hook.\n\nThis function can raise an error if it is called from a thread with a pending C call with no continuation function (what is called a C-call boundary), or it is called from a thread that is not running inside a resume (typically the main thread).","name":"lua_yieldk","type":"c-api","def":"lua_yieldk"},{"doc":"`lua_WarnFunction`\n\n~~~\ntypedef void (*lua_WarnFunction) (void *ud, const char *msg, int tocont);\n~~~\n\nThe type of warning functions, called by Lua to emit warnings. The first parameter is an opaque pointer set by `lua_setwarnf`. The second parameter is the warning message. The third parameter is a boolean that indicates whether the message is to be continued by the message in the next call.\n\nSee `warn` for more details about warnings.","name":"lua_WarnFunction","type":"c-api","def":"lua_WarnFunction"},{"doc":"`lua_isyieldable`\n\n[-0, +0, –]\n\n~~~\nint lua_isyieldable (lua_State *L);\n~~~\n\nReturns 1 if the given coroutine can yield, and 0 otherwise.","name":"lua_isyieldable","type":"c-api","def":"lua_isyieldable"},{"doc":"`lua_pushnil`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushnil (lua_State *L);\n~~~\n\nPushes a nil value onto the stack.","name":"lua_pushnil","type":"c-api","def":"lua_pushnil"},{"doc":"`lua_pushinteger`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushinteger (lua_State *L, lua_Integer n);\n~~~\n\nPushes an integer with value `n` onto the stack.","name":"lua_pushinteger","type":"c-api","def":"lua_pushinteger"},{"doc":"`lua_pushcclosure`\n\n[-n, +1, m]\n\n~~~\nvoid lua_pushcclosure (lua_State *L, lua_CFunction fn, int n);\n~~~\n\nPushes a new C closure onto the stack. This function receives a pointer to a C function and pushes onto the stack a Lua value of type `function` that, when called, invokes the corresponding C function. The parameter `n` tells how many upvalues this function will have (see §4.2).\n\nAny function to be callable by Lua must follow the correct protocol to receive its parameters and return its results (see `lua_CFunction`).\n\nWhen a C function is created, it is possible to associate some values with it, the so called upvalues; these upvalues are then accessible to the function whenever it is called. This association is called a C closure (see §4.2). To create a C closure, first the initial values for its upvalues must be pushed onto the stack. (When there are multiple upvalues, the first value is pushed first.) Then `lua_pushcclosure` is called to create and push the C function onto the stack, with the argument `n` telling how many values will be associated with the function. `lua_pushcclosure` also pops these values from the stack.\n\nThe maximum value for `n` is 255.\n\nWhen `n` is zero, this function creates a light C function, which is just a pointer to the C function. In that case, it never raises a memory error.","name":"lua_pushcclosure","type":"c-api","def":"lua_pushcclosure"},{"doc":"`lua_gethookcount`\n\n[-0, +0, –]\n\n~~~\nint lua_gethookcount (lua_State *L);\n~~~\n\nReturns the current hook count.","name":"lua_gethookcount","type":"c-api","def":"lua_gethookcount"},{"doc":"`lua_pushboolean`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushboolean (lua_State *L, int b);\n~~~\n\nPushes a boolean value with value `b` onto the stack.","name":"lua_pushboolean","type":"c-api","def":"lua_pushboolean"},{"doc":"`lua_pop`\n\n[-n, +0, –]\n\n~~~\nvoid lua_pop (lua_State *L, int n);\n~~~\n\nPops `n` elements from the stack.","name":"lua_pop","type":"c-api","def":"lua_pop"},{"doc":"`lua_pcallk`\n\n[-(nargs + 1), +(nresults|1), –]\n\n~~~\nint lua_pcallk (lua_State *L,\n int nargs,\n int nresults,\n int msgh,\n lua_KContext ctx,\n lua_KFunction k);\n~~~\n\nThis function behaves exactly like `lua_pcall`, except that it allows the called function to yield (see §4.5).","name":"lua_pcallk","type":"c-api","def":"lua_pcallk"},{"doc":"`lua_pcall`\n\n[-(nargs + 1), +(nresults|1), –]\n\n~~~\nint lua_pcall (lua_State *L, int nargs, int nresults, int msgh);\n~~~\n\nCalls a function (or a callable object) in protected mode.\n\nBoth `nargs` and `nresults` have the same meaning as in `lua_call`. If there are no errors during the call, `lua_pcall` behaves exactly like `lua_call`. However, if there is any error, `lua_pcall` catches it, pushes a single value on the stack (the error object), and returns an error code. Like `lua_call`, `lua_pcall` always removes the function and its arguments from the stack.\n\nIf `msgh` is 0, then the error object returned on the stack is exactly the original error object. Otherwise, `msgh` is the stack index of a message handler. (This index cannot be a pseudo-index.) In case of runtime errors, this handler will be called with the error object and its return value will be the object returned on the stack by `lua_pcall`.\n\nTypically, the message handler is used to add more debug information to the error object, such as a stack traceback. Such information cannot be gathered after the return of `lua_pcall`, since by then the stack has unwound.\n\nThe `lua_pcall` function returns one of the following status codes: `LUA_OK`, `LUA_ERRRUN`, `LUA_ERRMEM`, or `LUA_ERRERR`.","name":"lua_pcall","type":"c-api","def":"lua_pcall"},{"doc":"`lua_gettable`\n\n[-1, +1, e]\n\n~~~\nint lua_gettable (lua_State *L, int index);\n~~~\n\nPushes onto the stack the value `t[k]`, where `t` is the value at the given index and `k` is the value on the top of the stack.\n\nThis function pops the key from the stack, pushing the resulting value in its place. As in Lua, this function may trigger a metamethod for the \"index\" event (see §2.4).\n\nReturns the type of the pushed value.","name":"lua_gettable","type":"c-api","def":"lua_gettable"},{"doc":"`lua_getextraspace`\n\n[-0, +0, –]\n\n~~~\nvoid *lua_getextraspace (lua_State *L);\n~~~\n\nReturns a pointer to a raw memory area associated with the given Lua state. The application can use this area for any purpose; Lua does not use it for anything.\n\nEach new thread has this area initialized with a copy of the area of the main thread.\n\nBy default, this area has the size of a pointer to void, but you can recompile Lua with a different size for this area. (See `LUA_EXTRASPACE` in `luaconf.h`.)","name":"lua_getextraspace","type":"c-api","def":"lua_getextraspace"},{"doc":"`lua_upvaluejoin`\n\n[-0, +0, –]\n\n~~~\nvoid lua_upvaluejoin (lua_State *L, int funcindex1, int n1,\n int funcindex2, int n2);\n~~~\n\nMake the `n1`-th upvalue of the Lua closure at index `funcindex1` refer to the `n2`-th upvalue of the Lua closure at index `funcindex2`.","name":"lua_upvaluejoin","type":"c-api","def":"lua_upvaluejoin"},{"doc":"`lua_newtable`\n\n[-0, +1, m]\n\n~~~\nvoid lua_newtable (lua_State *L);\n~~~\n\nCreates a new empty table and pushes it onto the stack. It is equivalent to `lua_createtable(L, 0, 0)`.","name":"lua_newtable","type":"c-api","def":"lua_newtable"},{"doc":"`luaL_callmeta`\n\n[-0, +(0|1), e]\n\n~~~\nint luaL_callmeta (lua_State *L, int obj, const char *e);\n~~~\n\nCalls a metamethod.\n\nIf the object at index `obj` has a metatable and this metatable has a field `e`, this function calls this field passing the object as its only argument. In this case this function returns true and pushes onto the stack the value returned by the call. If there is no metatable or no metamethod, this function returns false without pushing any value on the stack.","name":"luaL_callmeta","type":"c-api","def":"luaL_callmeta"},{"doc":"`lua_arith`\n\n[-(2|1), +1, e]\n\n~~~\nvoid lua_arith (lua_State *L, int op);\n~~~\n\nPerforms an arithmetic or bitwise operation over the two values (or one, in the case of negations) at the top of the stack, with the value on the top being the second operand, pops these values, and pushes the result of the operation. The function follows the semantics of the corresponding Lua operator (that is, it may call metamethods).\n\nThe value of `op` must be one of the following constants:\n\n * `LUA_OPADD`: performs addition (`+`)\n * `LUA_OPSUB`: performs subtraction (`-`)\n * `LUA_OPMUL`: performs multiplication (`*`)\n * `LUA_OPDIV`: performs float division (`\/`)\n * `LUA_OPIDIV`: performs floor division (`\/\/`)\n * `LUA_OPMOD`: performs modulo (`%`)\n * `LUA_OPPOW`: performs exponentiation (`^`)\n * `LUA_OPUNM`: performs mathematical negation (unary `-`)\n * `LUA_OPBNOT`: performs bitwise NOT (`~`)\n * `LUA_OPBAND`: performs bitwise AND (`&`)\n * `LUA_OPBOR`: performs bitwise OR (`|`)\n * `LUA_OPBXOR`: performs bitwise exclusive OR (`~`)\n * `LUA_OPSHL`: performs left shift (`<<`)\n * `LUA_OPSHR`: performs right shift (`>>`)","name":"lua_arith","type":"c-api","def":"lua_arith"},{"doc":"`lua_isthread`\n\n[-0, +0, –]\n\n~~~\nint lua_isthread (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a thread, and 0 otherwise.","name":"lua_isthread","type":"c-api","def":"lua_isthread"},{"doc":"`luaL_len`\n\n[-0, +0, e]\n\n~~~\nlua_Integer luaL_len (lua_State *L, int index);\n~~~\n\nReturns the \"length\" of the value at the given index as a number; it is equivalent to the '`#`' operator in Lua (see §3.4.7). Raises an error if the result of the operation is not an integer. (This case can only happen through metamethods.)","name":"luaL_len","type":"c-api","def":"luaL_len"},{"doc":"`lua_getlocal`\n\n[-0, +(0|1), –]\n\n~~~\nconst char *lua_getlocal (lua_State *L, const lua_Debug *ar, int n);\n~~~\n\nGets information about a local variable or a temporary value of a given activation record or a given function.\n\nIn the first case, the parameter `ar` must be a valid activation record that was filled by a previous call to `lua_getstack` or given as argument to a hook (see `lua_Hook`). The index `n` selects which local variable to inspect; see `debug.getlocal` for details about variable indices and names.\n\n`lua_getlocal` pushes the variable's value onto the stack and returns its name.\n\nIn the second case, `ar` must be `NULL` and the function to be inspected must be on the top of the stack. In this case, only parameters of Lua functions are visible (as there is no information about what variables are active) and no values are pushed onto the stack.\n\nReturns `NULL` (and pushes nothing) when the index is greater than the number of active local variables.","name":"lua_getlocal","type":"c-api","def":"lua_getlocal"},{"doc":"`lua_iscfunction`\n\n[-0, +0, –]\n\n~~~\nint lua_iscfunction (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a C function, and 0 otherwise.","name":"lua_iscfunction","type":"c-api","def":"lua_iscfunction"},{"doc":"`lua_isnumber`\n\n[-0, +0, –]\n\n~~~\nint lua_isnumber (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a number or a string convertible to a number, and 0 otherwise.","name":"lua_isnumber","type":"c-api","def":"lua_isnumber"},{"doc":"`luaL_checklstring`\n\n[-0, +0, v]\n\n~~~\nconst char *luaL_checklstring (lua_State *L, int arg, size_t *l);\n~~~\n\nChecks whether the function argument `arg` is a string and returns this string; if `l` is not `NULL` fills its referent with the string's length.\n\nThis function uses `lua_tolstring` to get its result, so all conversions and caveats of that function apply here.","name":"luaL_checklstring","type":"c-api","def":"luaL_checklstring"},{"doc":"`lua_getmetatable`\n\n[-0, +(0|1), –]\n\n~~~\nint lua_getmetatable (lua_State *L, int index);\n~~~\n\nIf the value at the given index has a metatable, the function pushes that metatable onto the stack and returns 1. Otherwise, the function returns 0 and pushes nothing on the stack.","name":"lua_getmetatable","type":"c-api","def":"lua_getmetatable"},{"doc":"`lua_KFunction`\n\n~~~\ntypedef int (*lua_KFunction) (lua_State *L, int status, lua_KContext ctx);\n~~~\n\nType for continuation functions (see §4.5).","name":"lua_KFunction","type":"c-api","def":"lua_KFunction"},{"doc":"`luaL_traceback`\n\n[-0, +1, m]\n\n~~~\nvoid luaL_traceback (lua_State *L, lua_State *L1, const char *msg,\n int level);\n~~~\n\nCreates and pushes a traceback of the stack `L1`. If `msg` is not `NULL`, it is appended at the beginning of the traceback. The `level` parameter tells at which level to start the traceback.","name":"luaL_traceback","type":"c-api","def":"luaL_traceback"},{"doc":"`lua_isinteger`\n\n[-0, +0, –]\n\n~~~\nint lua_isinteger (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is an integer (that is, the value is a number and is represented as an integer), and 0 otherwise.","name":"lua_isinteger","type":"c-api","def":"lua_isinteger"},{"doc":"`lua_isboolean`\n\n[-0, +0, –]\n\n~~~\nint lua_isboolean (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a boolean, and 0 otherwise.","name":"lua_isboolean","type":"c-api","def":"lua_isboolean"},{"doc":"`lua_gettop`\n\n[-0, +0, –]\n\n~~~\nint lua_gettop (lua_State *L);\n~~~\n\nReturns the index of the top element in the stack. Because indices start at 1, this result is equal to the number of elements in the stack; in particular, 0 means an empty stack.","name":"lua_gettop","type":"c-api","def":"lua_gettop"},{"doc":"`lua_getupvalue`\n\n[-0, +(0|1), –]\n\n~~~\nconst char *lua_getupvalue (lua_State *L, int funcindex, int n);\n~~~\n\nGets information about the `n`-th upvalue of the closure at index `funcindex`. It pushes the upvalue's value onto the stack and returns its name. Returns `NULL` (and pushes nothing) when the index `n` is greater than the number of upvalues.\n\nSee `debug.getupvalue` for more information about upvalues.","name":"lua_getupvalue","type":"c-api","def":"lua_getupvalue"},{"doc":"`lua_getstack`\n\n[-0, +0, –]\n\n~~~\nint lua_getstack (lua_State *L, int level, lua_Debug *ar);\n~~~\n\nGets information about the interpreter runtime stack.\n\nThis function fills parts of a `lua_Debug` structure with an identification of the activation record of the function executing at a given level. Level 0 is the current running function, whereas level n+1 is the function that has called level n (except for tail calls, which do not count on the stack). When called with a level greater than the stack depth, `lua_getstack` returns 0; otherwise it returns 1.","name":"lua_getstack","type":"c-api","def":"lua_getstack"},{"doc":"`lua_toclose`\n\n[-0, +0, v]\n\n~~~\nvoid lua_toclose (lua_State *L, int index);\n~~~\n\nMarks the given index in the stack as a to-be-closed \"variable\" (see §3.3.8). Like a to-be-closed variable in Lua, the value at that index in the stack will be closed when it goes out of scope. Here, in the context of a C function, to go out of scope means that the running function returns to Lua, there is an error, or the index is removed from the stack through `lua_settop` or `lua_pop`. An index marked as to-be-closed should not be removed from the stack by any other function in the API except `lua_settop` or `lua_pop`.\n\nThis function should not be called for an index that is equal to or below an active to-be-closed index.\n\nThis function can raise an out-of-memory error. In that case, the value in the given index is immediately closed, as if it was already marked.","name":"lua_toclose","type":"c-api","def":"lua_toclose"},{"doc":"`lua_isnil`\n\n[-0, +0, –]\n\n~~~\nint lua_isnil (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is nil, and 0 otherwise.","name":"lua_isnil","type":"c-api","def":"lua_isnil"},{"doc":"`luaL_dostring`\n\n[-0, +?, –]\n\n~~~\nint luaL_dostring (lua_State *L, const char *str);\n~~~\n\nLoads and runs the given string. It is defined as the following macro:\n\n~~~\n\n (luaL_loadstring(L, str) || lua_pcall(L, 0, LUA_MULTRET, 0))\n\n~~~\n\nIt returns `LUA_OK` if there are no errors, or an error code in case of errors (see §4.4.1).","name":"luaL_dostring","type":"c-api","def":"luaL_dostring"},{"doc":"`lua_Alloc`\n\n~~~\ntypedef void * (*lua_Alloc) (void *ud,\n void *ptr,\n size_t osize,\n size_t nsize);\n~~~\n\nThe type of the memory-allocation function used by Lua states. The allocator function must provide a functionality similar to `realloc`, but not exactly the same. Its arguments are `ud`, an opaque pointer passed to `lua_newstate`; `ptr`, a pointer to the block being allocated\/reallocated\/freed; `osize`, the original size of the block or some code about what is being allocated; and `nsize`, the new size of the block.\n\nWhen `ptr` is not `NULL`, `osize` is the size of the block pointed by `ptr`, that is, the size given when it was allocated or reallocated.\n\nWhen `ptr` is `NULL`, `osize` encodes the kind of object that Lua is allocating. `osize` is any of `LUA_TSTRING`, `LUA_TTABLE`, `LUA_TFUNCTION`, `LUA_TUSERDATA`, or `LUA_TTHREAD` when (and only when) Lua is creating a new object of that type. When `osize` is some other value, Lua is allocating memory for something else.\n\nLua assumes the following behavior from the allocator function:\n\nWhen `nsize` is zero, the allocator must behave like `free` and then return `NULL`.\n\nWhen `nsize` is not zero, the allocator must behave like `realloc`. In particular, the allocator returns `NULL` if and only if it cannot fulfill the request.\n\nHere is a simple implementation for the allocator function. It is used in the auxiliary library by `luaL_newstate`.\n\n~~~\n\n static void *l_alloc (void *ud, void *ptr, size_t osize,\n size_t nsize) {\n (void)ud; (void)osize; \/* not used *\/\n if (nsize == 0) {\n free(ptr);\n return NULL;\n }\n else\n return realloc(ptr, nsize);\n }\n\n~~~\n\nNote that Standard C ensures that `free(NULL)` has no effect and that `realloc(NULL,size)` is equivalent to `malloc(size)`.","name":"lua_Alloc","type":"c-api","def":"lua_Alloc"},{"doc":"`lua_State`\n\n~~~\ntypedef struct lua_State lua_State;\n~~~\n\nAn opaque structure that points to a thread and indirectly (through the thread) to the whole state of a Lua interpreter. The Lua library is fully reentrant: it has no global variables. All information about a state is accessible through this structure.\n\nA pointer to this structure must be passed as the first argument to every function in the library, except to `lua_newstate`, which creates a Lua state from scratch.","name":"lua_State","type":"c-api","def":"lua_State"},{"doc":"`lua_rawsetp`\n\n[-1, +0, m]\n\n~~~\nvoid lua_rawsetp (lua_State *L, int index, const void *p);\n~~~\n\nDoes the equivalent of `t[p] = v`, where `t` is the table at the given index, `p` is encoded as a light userdata, and `v` is the value on the top of the stack.\n\nThis function pops the value from the stack. The assignment is raw, that is, it does not use the `__newindex` metavalue.","name":"lua_rawsetp","type":"c-api","def":"lua_rawsetp"},{"doc":"using the environment variable `LUA_CPATH_5_4`, or the environment variable `LUA_CPATH`, or a default path defined in `luaconf.h`.","name":"LUA_CPATH_5_4","type":"c-api","def":"LUA_CPATH_5_4"},{"doc":"`lua_setfield`\n\n[-1, +0, e]\n\n~~~\nvoid lua_setfield (lua_State *L, int index, const char *k);\n~~~\n\nDoes the equivalent to `t[k] = v`, where `t` is the value at the given index and `v` is the value on the top of the stack.\n\nThis function pops the value from the stack. As in Lua, this function may trigger a metamethod for the \"newindex\" event (see §2.4).","name":"lua_setfield","type":"c-api","def":"lua_setfield"},{"doc":"`lua_pushlstring`\n\n[-0, +1, m]\n\n~~~\nconst char *lua_pushlstring (lua_State *L, const char *s, size_t len);\n~~~\n\nPushes the string pointed to by `s` with size `len` onto the stack. Lua will make or reuse an internal copy of the given string, so the memory at `s` can be freed or reused immediately after the function returns. The string can contain any binary data, including embedded zeros.\n\nReturns a pointer to the internal copy of the string.","name":"lua_pushlstring","type":"c-api","def":"lua_pushlstring"},{"doc":"`lua_createtable`\n\n[-0, +1, m]\n\n~~~\nvoid lua_createtable (lua_State *L, int narr, int nrec);\n~~~\n\nCreates a new empty table and pushes it onto the stack. Parameter `narr` is a hint for how many elements the table will have as a sequence; parameter `nrec` is a hint for how many other elements the table will have. Lua may use these hints to preallocate memory for the new table. This preallocation may help performance when you know in advance how many elements the table will have. Otherwise you can use the function `lua_newtable`.","name":"lua_createtable","type":"c-api","def":"lua_createtable"},{"doc":"`lua_gethook`\n\n[-0, +0, –]\n\n~~~\nlua_Hook lua_gethook (lua_State *L);\n~~~\n\nReturns the current hook function.","name":"lua_gethook","type":"c-api","def":"lua_gethook"},{"doc":"`lua_setupvalue`\n\n[-(0|1), +0, –]\n\n~~~\nconst char *lua_setupvalue (lua_State *L, int funcindex, int n);\n~~~\n\nSets the value of a closure's upvalue. It assigns the value on the top of the stack to the upvalue and returns its name. It also pops the value from the stack.\n\nReturns `NULL` (and pops nothing) when the index `n` is greater than the number of upvalues.\n\nParameters `funcindex` and `n` are as in the function `lua_getupvalue`.","name":"lua_setupvalue","type":"c-api","def":"lua_setupvalue"},{"doc":"`lua_KContext`\n\n~~~\ntypedef ... lua_KContext;\n~~~\n\nThe type for continuation-function contexts. It must be a numeric type. This type is defined as `intptr_t` when `intptr_t` is available, so that it can store pointers too. Otherwise, it is defined as `ptrdiff_t`.","name":"lua_KContext","type":"c-api","def":"lua_KContext"},{"doc":"`lua_len`\n\n[-0, +1, e]\n\n~~~\nvoid lua_len (lua_State *L, int index);\n~~~\n\nReturns the length of the value at the given index. It is equivalent to the '`#`' operator in Lua (see §3.4.7) and may trigger a metamethod for the \"length\" event (see §2.4). The result is pushed on the stack.","name":"lua_len","type":"c-api","def":"lua_len"},{"doc":"`lua_pushfstring`\n\n[-0, +1, v]\n\n~~~\nconst char *lua_pushfstring (lua_State *L, const char *fmt, ...);\n~~~\n\nPushes onto the stack a formatted string and returns a pointer to this string. It is similar to the ISO C function `sprintf`, but has two important differences. First, you do not have to allocate space for the result; the result is a Lua string and Lua takes care of memory allocation (and deallocation, through garbage collection). Second, the conversion specifiers are quite restricted. There are no flags, widths, or precisions. The conversion specifiers can only be '`%%`' (inserts the character '`%`'), '`%s`' (inserts a zero-terminated string, with no size restrictions), '`%f`' (inserts a `lua_Number`), '`%I`' (inserts a `lua_Integer`), '`%p`' (inserts a pointer), '`%d`' (inserts an `int`), '`%c`' (inserts an `int` as a one-byte character), and '`%U`' (inserts a `long int` as a UTF-8 byte sequence).\n\nThis function may raise errors due to memory overflow or an invalid conversion specifier.","name":"lua_pushfstring","type":"c-api","def":"lua_pushfstring"},{"doc":"`lua_numbertointeger`\n\n~~~\nint lua_numbertointeger (lua_Number n, lua_Integer *p);\n~~~\n\nTries to convert a Lua float to a Lua integer; the float `n` must have an integral value. If that value is within the range of Lua integers, it is converted to an integer and assigned to `*p`. The macro results in a boolean indicating whether the conversion was successful. (Note that this range test can be tricky to do correctly without this macro, due to rounding.)\n\nThis macro may evaluate its arguments more than once.","name":"lua_numbertointeger","type":"c-api","def":"lua_numbertointeger"},{"doc":"`lua_checkstack`\n\n[-0, +0, –]\n\n~~~\nint lua_checkstack (lua_State *L, int n);\n~~~\n\nEnsures that the stack has space for at least `n` extra slots, that is, that you can safely push up to `n` values into it. It returns false if it cannot fulfill the request, either because it would cause the stack to be greater than a fixed maximum size (typically at least several thousand elements) or because it cannot allocate memory for the extra space. This function never shrinks the stack; if the stack already has space for the extra slots, it is left unchanged.","name":"lua_checkstack","type":"c-api","def":"lua_checkstack"},{"doc":"`lua_tonumber`\n\n[-0, +0, –]\n\n~~~\nlua_Number lua_tonumber (lua_State *L, int index);\n~~~\n\nEquivalent to `lua_tonumberx` with `isnum` equal to `NULL`.","name":"lua_tonumber","type":"c-api","def":"lua_tonumber"},{"doc":"`lua_pushnumber`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushnumber (lua_State *L, lua_Number n);\n~~~\n\nPushes a float with value `n` onto the stack.","name":"lua_pushnumber","type":"c-api","def":"lua_pushnumber"},{"doc":"`lua_getinfo`\n\n[-(0|1), +(0|1|2), m]\n\n~~~\nint lua_getinfo (lua_State *L, const char *what, lua_Debug *ar);\n~~~\n\nGets information about a specific function or function invocation.\n\nTo get information about a function invocation, the parameter `ar` must be a valid activation record that was filled by a previous call to `lua_getstack` or given as argument to a hook (see `lua_Hook`).\n\nTo get information about a function, you push it onto the stack and start the `what` string with the character '`>`'. (In that case, `lua_getinfo` pops the function from the top of the stack.) For instance, to know in which line a function `f` was defined, you can write the following code:\n\n~~~\n\n lua_Debug ar;\n lua_getglobal(L, \"f\"); \/* get global 'f' *\/\n lua_getinfo(L, \">S\", &ar);\n printf(\"%d\\n\", ar.linedefined);\n\n~~~\n\nEach character in the string `what` selects some fields of the structure `ar` to be filled or a value to be pushed on the stack:\n\n * '`n`': fills in the field `name` and `namewhat`;\n\n * '`S`': fills in the fields `source`, `short_src`, `linedefined`, `lastlinedefined`, and `what`;\n\n * '`l`': fills in the field `currentline`;\n\n * '`t`': fills in the field `istailcall`;\n\n * '`u`': fills in the fields `nups`, `nparams`, and `isvararg`;\n\n * '`f`': pushes onto the stack the function that is running at the given level;\n\n * '`L`': pushes onto the stack a table whose indices are the numbers of the lines that are valid on the function. (A valid line is a line with some associated code, that is, a line where you can put a break point. Non-valid lines include empty lines and comments.)\n\nIf this option is given together with option '`f`', its table is pushed after the function.\n\nThis is the only option that can raise a memory error.\n\nThis function returns 0 to signal an invalid option in `what`; even then the valid options are handled correctly.","name":"lua_getinfo","type":"c-api","def":"lua_getinfo"},{"doc":"`luaL_dofile`\n\n[-0, +?, m]\n\n~~~\nint luaL_dofile (lua_State *L, const char *filename);\n~~~\n\nLoads and runs the given file. It is defined as the following macro:\n\n~~~\n\n (luaL_loadfile(L, filename) || lua_pcall(L, 0, LUA_MULTRET, 0))\n\n~~~\n\nIt returns `LUA_OK` if there are no errors, or an error code in case of errors (see §4.4.1).","name":"luaL_dofile","type":"c-api","def":"luaL_dofile"},{"doc":"`luaL_addsize`\n\n[-?, +?, –]\n\n~~~\nvoid luaL_addsize (luaL_Buffer *B, size_t n);\n~~~\n\nAdds to the buffer `B` a string of length `n` previously copied to the buffer area (see `luaL_prepbuffer`).","name":"luaL_addsize","type":"c-api","def":"luaL_addsize"},{"doc":"`lua_copy`\n\n[-0, +0, –]\n\n~~~\nvoid lua_copy (lua_State *L, int fromidx, int toidx);\n~~~\n\nCopies the element at index `fromidx` into the valid index `toidx`, replacing the value at that position. Values at other positions are not affected.","name":"lua_copy","type":"c-api","def":"lua_copy"},{"doc":"`lua_getglobal`\n\n[-0, +1, e]\n\n~~~\nint lua_getglobal (lua_State *L, const char *name);\n~~~\n\nPushes onto the stack the value of the global `name`. Returns the type of that value.","name":"lua_getglobal","type":"c-api","def":"lua_getglobal"}],"name":"lua._C","desc":"Lua 5.4 C API"},{"doc":"Select a section from the Lua 5.4 manual by prefacing it's number with and replacing all periods with an '_'; e.g. Section 6.4 would be _6_4.","items":[{"doc":"3.3.3 – Assignment\n\nLua allows multiple assignments. Therefore, the syntax for assignment defines a list of variables on the left side and a list of expressions on the right side. The elements in both lists are separated by commas:\n\n~~~\n\n\tstat ::= varlist ‘=’ explist\n\tvarlist ::= var {‘,’ var}\n\texplist ::= exp {‘,’ exp}\n\n~~~\n\nExpressions are discussed in §3.4.\n\nBefore the assignment, the list of values is adjusted to the length of the list of variables. If there are more values than needed, the excess values are thrown away. If there are fewer values than needed, the list is extended with nil's. If the list of expressions ends with a function call, then all values returned by that call enter the list of values, before the adjustment (except when the call is enclosed in parentheses; see §3.4).\n\nThe assignment statement first evaluates all its expressions and only then the assignments are performed. Thus the code\n\n~~~\n\n i = 3\n i, a[i] = i+1, 20\n\n~~~\n\nsets `a[3]` to 20, without affecting `a[4]` because the `i` in `a[i]` is evaluated (to 3) before it is assigned 4. Similarly, the line\n\n~~~\n\n x, y = y, x\n\n~~~\n\nexchanges the values of `x` and `y`, and\n\n~~~\n\n x, y, z = y, z, x\n\n~~~\n\ncyclically permutes the values of `x`, `y`, and `z`.\n\nAn assignment to a global name `x = val` is equivalent to the assignment `_ENV.x = val` (see §2.2).\n\nThe meaning of assignments to table fields and global variables (which are actually table fields, too) can be changed via metatables (see §2.4).","name":"_3_3_3","type":"manual","def":"3.3.3 – Assignment"},{"doc":"2.4 – Metatables and Metamethods\n\nEvery value in Lua can have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original value under certain events. You can change several aspects of the behavior of a value by setting specific fields in its metatable. For instance, when a non-numeric value is the operand of an addition, Lua checks for a function in the field \"`__add`\" of the value's metatable. If it finds one, Lua calls this function to perform the addition.\n\nThe key for each event in a metatable is a string with the event name prefixed by two underscores; the corresponding value is called a metavalue. For most events, the metavalue must be a function, which is then called a metamethod. In the previous example, the key is the string \"`__add`\" and the metamethod is the function that performs the addition. Unless stated otherwise, a metamethod may in fact be any callable value, which is either a function or a value with a `__call` metamethod.\n\nYou can query the metatable of any value using the `getmetatable` function. Lua queries metamethods in metatables using a raw access (see `rawget`).\n\nYou can replace the metatable of tables using the `setmetatable` function. You cannot change the metatable of other types from Lua code, except by using the debug library (§6.10).\n\nTables and full userdata have individual metatables, although multiple tables and userdata can share their metatables. Values of all other types share one single metatable per type; that is, there is one single metatable for all numbers, one for all strings, etc. By default, a value has no metatable, but the string library sets a metatable for the string type (see §6.4).\n\nA detailed list of operations controlled by metatables is given next. Each event is identified by its corresponding key. By convention, all metatable keys used by Lua are composed by two underscores followed by lowercase Latin letters.\n\n * `__add`: the addition (`+`) operation. If any operand for an addition is not a number, Lua will try to call a metamethod. It starts by checking the first operand (even if it is a number); if that operand does not define a metamethod for `__add`, then Lua will check the second operand. If Lua can find a metamethod, it calls the metamethod with the two operands as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, if no metamethod is found, Lua raises an error.\n\n * `__sub`: the subtraction (`-`) operation. Behavior similar to the addition operation.\n\n * `__mul`: the multiplication (`*`) operation. Behavior similar to the addition operation.\n\n * `__div`: the division (`\/`) operation. Behavior similar to the addition operation.\n\n * `__mod`: the modulo (`%`) operation. Behavior similar to the addition operation.\n\n * `__pow`: the exponentiation (`^`) operation. Behavior similar to the addition operation.\n\n * `__unm`: the negation (unary `-`) operation. Behavior similar to the addition operation.\n\n * `__idiv`: the floor division (`\/\/`) operation. Behavior similar to the addition operation.\n\n * `__band`: the bitwise AND (`&`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither an integer nor a float coercible to an integer (see §3.4.3).\n\n * `__bor`: the bitwise OR (`|`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bxor`: the bitwise exclusive OR (binary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__bnot`: the bitwise NOT (unary `~`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shl`: the bitwise left shift (`<<`) operation. Behavior similar to the bitwise AND operation.\n\n * `__shr`: the bitwise right shift (`>>`) operation. Behavior similar to the bitwise AND operation.\n\n * `__concat`: the concatenation (`..`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod if any operand is neither a string nor a number (which is always coercible to a string).\n\n * `__len`: the length (`#`) operation. If the object is not a string, Lua will try its metamethod. If there is a metamethod, Lua calls it with the object as argument, and the result of the call (always adjusted to one value) is the result of the operation. If there is no metamethod but the object is a table, then Lua uses the table length operation (see §3.4.7). Otherwise, Lua raises an error.\n\n * `__eq`: the equal (`==`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are either both tables or both full userdata and they are not primitively equal. The result of the call is always converted to a boolean.\n\n * `__lt`: the less than (`<`) operation. Behavior similar to the addition operation, except that Lua will try a metamethod only when the values being compared are neither both numbers nor both strings. Moreover, the result of the call is always converted to a boolean.\n\n * `__le`: the less equal (`<=`) operation. Behavior similar to the less than operation.\n\n * `__index`: The indexing access operation `table[key]`. This event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nThe metavalue for this event can be either a function, a table, or any value with an `__index` metavalue. If it is a function, it is called with `table` and `key` as arguments, and the result of the call (adjusted to one value) is the result of the operation. Otherwise, the final result is the result of indexing this metavalue with `key`. This indexing is regular, not raw, and therefore can trigger another `__index` metavalue.\n\n * `__newindex`: The indexing assignment `table[key] = value`. Like the index event, this event happens when `table` is not a table or when `key` is not present in `table`. The metavalue is looked up in the metatable of `table`.\n\nLike with indexing, the metavalue for this event can be either a function, a table, or any value with an `__newindex` metavalue. If it is a function, it is called with `table`, `key`, and `value` as arguments. Otherwise, Lua repeats the indexing assignment over this metavalue with the same key and value. This assignment is regular, not raw, and therefore can trigger another `__newindex` metavalue.\n\nWhenever a `__newindex` metavalue is invoked, Lua does not perform the primitive assignment. If needed, the metamethod itself can call `rawset` to do the assignment.\n\n * `__call`: The call operation `func(args)`. This event happens when Lua tries to call a non-function value (that is, `func` is not a function). The metamethod is looked up in `func`. If present, the metamethod is called with `func` as its first argument, followed by the arguments of the original call (`args`). All results of the call are the results of the operation. This is the only metamethod that allows multiple results.\n\nIn addition to the previous list, the interpreter also respects the following keys in metatables: `__gc` (see §2.5.3), `__close` (see §3.3.8), `__mode` (see §2.5.4), and `__name`. (The entry `__name`, when it contains a string, may be used by `tostring` and in error messages.)\n\nFor the unary operators (negation, length, and bitwise NOT), the metamethod is computed and called with a dummy second operand, equal to the first one. This extra operand is only to simplify Lua's internals (by making these operators behave like a binary operation) and may be removed in future versions. For most uses this extra operand is irrelevant.\n\nBecause metatables are regular tables, they can contain arbitrary fields, not only the event names defined above. Some functions in the standard library (e.g., `tostring`) use other fields in metatables for their own purposes.\n\nIt is a good practice to add all needed metamethods to a table before setting it as a metatable of some object. In particular, the `__gc` metamethod works only when this order is followed (see §2.5.3). It is also a good practice to set the metatable of an object right after its creation.","name":"_2_4","type":"manual","def":"2.4 – Metatables and Metamethods"},{"doc":"3.4 – Expressions\n\nThe basic expressions in Lua are the following:\n\n~~~\n\n\texp ::= prefixexp\n\texp ::= nil | false | true\n\texp ::= Numeral\n\texp ::= LiteralString\n\texp ::= functiondef\n\texp ::= tableconstructor\n\texp ::= ‘...’\n\texp ::= exp binop exp\n\texp ::= unop exp\n\tprefixexp ::= var | functioncall | ‘(’ exp ‘)’\n\n~~~\n\nNumerals and literal strings are explained in §3.1; variables are explained in §3.2; function definitions are explained in §3.4.11; function calls are explained in §3.4.10; table constructors are explained in §3.4.9. Vararg expressions, denoted by three dots ('`...`'), can only be used when directly inside a vararg function; they are explained in §3.4.11.\n\nBinary operators comprise arithmetic operators (see §3.4.1), bitwise operators (see §3.4.2), relational operators (see §3.4.4), logical operators (see §3.4.5), and the concatenation operator (see §3.4.6). Unary operators comprise the unary minus (see §3.4.1), the unary bitwise NOT (see §3.4.2), the unary logical not (see §3.4.5), and the unary length operator (see §3.4.7).\n\nBoth function calls and vararg expressions can result in multiple values. If a function call is used as a statement (see §3.3.6), then its return list is adjusted to zero elements, thus discarding all returned values. If an expression is used as the last (or the only) element of a list of expressions, then no adjustment is made (unless the expression is enclosed in parentheses). In all other contexts, Lua adjusts the result list to one element, either discarding all values except the first one or adding a single nil if there are no values.\n\nHere are some examples:\n\n~~~\n\n f() -- adjusted to 0 results\n g(f(), x) -- f() is adjusted to 1 result\n g(x, f()) -- g gets x plus all results from f()\n a,b,c = f(), x -- f() is adjusted to 1 result (c gets nil)\n a,b = ... -- a gets the first vararg argument, b gets\n -- the second (both a and b can get nil if there\n -- is no corresponding vararg argument)\n \n a,b,c = x, f() -- f() is adjusted to 2 results\n a,b,c = f() -- f() is adjusted to 3 results\n return f() -- returns all results from f()\n return ... -- returns all received vararg arguments\n return x,y,f() -- returns x, y, and all results from f()\n {f()} -- creates a list with all results from f()\n {...} -- creates a list with all vararg arguments\n {f(), nil} -- f() is adjusted to 1 result\n\n~~~\n\nAny expression enclosed in parentheses always results in only one value. Thus, `(f(x,y,z))` is always a single value, even if `f` returns several values. (The value of `(f(x,y,z))` is the first value returned by `f` or nil if `f` does not return any values.)","name":"_3_4","type":"manual","def":"3.4 – Expressions"},{"doc":"4.4 – Error Handling in C\n\nInternally, Lua uses the C `longjmp` facility to handle errors. (Lua will use exceptions if you compile it as C++; search for `LUAI_THROW` in the source code for details.) When Lua faces any error, such as a memory allocation error or a type error, it raises an error; that is, it does a long jump. A protected environment uses `setjmp` to set a recovery point; any error jumps to the most recent active recovery point.\n\nInside a C function you can raise an error explicitly by calling `lua_error`.\n\nMost functions in the API can raise an error, for instance due to a memory allocation error. The documentation for each function indicates whether it can raise errors.\n\nIf an error happens outside any protected environment, Lua calls a panic function (see `lua_atpanic`) and then calls `abort`, thus exiting the host application. Your panic function can avoid this exit by never returning (e.g., doing a long jump to your own recovery point outside Lua).\n\nThe panic function, as its name implies, is a mechanism of last resort. Programs should avoid it. As a general rule, when a C function is called by Lua with a Lua state, it can do whatever it wants on that Lua state, as it should be already protected. However, when C code operates on other Lua states (e.g., a Lua-state argument to the function, a Lua state stored in the registry, or the result of `lua_newthread`), it should use them only in API calls that cannot raise errors.\n\nThe panic function runs as if it were a message handler (see §2.3); in particular, the error object is on the top of the stack. However, there is no guarantee about stack space. To push anything on the stack, the panic function must first check the available space (see §4.1.1).","name":"_4_4","type":"manual","def":"4.4 – Error Handling in C"},{"doc":"3.3.8 – To-be-closed Variables\n\nA to-be-closed variable behaves like a constant local variable, except that its value is closed whenever the variable goes out of scope, including normal block termination, exiting its block by break\/goto\/return, or exiting by an error.\n\nHere, to close a value means to call its `__close` metamethod. When calling the metamethod, the value itself is passed as the first argument and the error object that caused the exit (if any) is passed as a second argument; if there was no error, the second argument is nil.\n\nThe value assigned to a to-be-closed variable must have a `__close` metamethod or be a false value. (nil and false are ignored as to-be-closed values.)\n\nIf several to-be-closed variables go out of scope at the same event, they are closed in the reverse order that they were declared.\n\nIf there is any error while running a closing method, that error is handled like an error in the regular code where the variable was defined. However, Lua may call the method one more time.\n\nAfter an error, the other pending closing methods will still be called. Errors in these methods interrupt the respective method and generate a warning, but are otherwise ignored; the error reported is only the original one.\n\nIf a coroutine yields and is never resumed again, some variables may never go out of scope, and therefore they will never be closed. (These variables are the ones created inside the coroutine and in scope at the point where the coroutine yielded.) Similarly, if a coroutine ends with an error, it does not unwind its stack, so it does not close any variable. In both cases, you can either use finalizers or call `coroutine.close` to close the variables. However, if the coroutine was created through `coroutine.wrap`, then its corresponding function will close the coroutine in case of errors.","name":"_3_3_8","type":"manual","def":"3.3.8 – To-be-closed Variables"},{"doc":"3.4.9 – Table Constructors\n\nTable constructors are expressions that create tables. Every time a constructor is evaluated, a new table is created. A constructor can be used to create an empty table or to create a table and initialize some of its fields. The general syntax for constructors is\n\n~~~\n\n\ttableconstructor ::= ‘{’ [fieldlist] ‘}’\n\tfieldlist ::= field {fieldsep field} [fieldsep]\n\tfield ::= ‘[’ exp ‘]’ ‘=’ exp | Name ‘=’ exp | exp\n\tfieldsep ::= ‘,’ | ‘;’\n\n~~~\n\nEach field of the form `[exp1] = exp2` adds to the new table an entry with key `exp1` and value `exp2`. A field of the form `name = exp` is equivalent to `[\"name\"] = exp`. Fields of the form `exp` are equivalent to `[i] = exp`, where `i` are consecutive integers starting with 1; fields in the other formats do not affect this counting. For example,\n\n~~~\n\n a = { [f(1)] = g; \"x\", \"y\"; x = 1, f(x), [30] = 23; 45 }\n\n~~~\n\nis equivalent to\n\n~~~\n\n do\n local t = {}\n t[f(1)] = g\n t[1] = \"x\" -- 1st exp\n t[2] = \"y\" -- 2nd exp\n t.x = 1 -- t[\"x\"] = 1\n t[3] = f(x) -- 3rd exp\n t[30] = 23\n t[4] = 45 -- 4th exp\n a = t\n end\n\n~~~\n\nThe order of the assignments in a constructor is undefined. (This order would be relevant only when there are repeated keys.)\n\nIf the last field in the list has the form `exp` and the expression is a function call or a vararg expression, then all values returned by this expression enter the list consecutively (see §3.4.10).\n\nThe field list can have an optional trailing separator, as a convenience for machine-generated code.","name":"_3_4_9","type":"manual","def":"3.4.9 – Table Constructors"},{"doc":"2.3 – Error Handling\n\nSeveral operations in Lua can raise an error. An error interrupts the normal flow of the program, which can continue by catching the error.\n\nLua code can explicitly raise an error by calling the `error` function. (This function never returns.)\n\nTo catch errors in Lua, you can do a protected call, using `pcall` (or `xpcall`). The function `pcall` calls a given function in protected mode. Any error while running the function stops its execution, and control returns immediately to `pcall`, which returns a status code.\n\nBecause Lua is an embedded extension language, Lua code starts running by a call from C code in the host program. (When you use Lua standalone, the `lua` application is the host program.) Usually, this call is protected; so, when an otherwise unprotected error occurs during the compilation or execution of a Lua chunk, control returns to the host, which can take appropriate measures, such as printing an error message.\n\nWhenever there is an error, an error object is propagated with information about the error. Lua itself only generates errors whose error object is a string, but programs may generate errors with any value as the error object. It is up to the Lua program or its host to handle such error objects. For historical reasons, an error object is often called an error message, even though it does not have to be a string.\n\nWhen you use `xpcall` (or `lua_pcall`, in C) you may give a message handler to be called in case of errors. This function is called with the original error object and returns a new error object. It is called before the error unwinds the stack, so that it can gather more information about the error, for instance by inspecting the stack and creating a stack traceback. This message handler is still protected by the protected call; so, an error inside the message handler will call the message handler again. If this loop goes on for too long, Lua breaks it and returns an appropriate message. The message handler is called only for regular runtime errors. It is not called for memory-allocation errors nor for errors while running finalizers or other message handlers.\n\nLua also offers a system of warnings (see `warn`). Unlike errors, warnings do not interfere in any way with program execution. They typically only generate a message to the user, although this behavior can be adapted from C (see `lua_setwarnf`).","name":"_2_3","type":"manual","def":"2.3 – Error Handling"},{"doc":"4.3 – Registry\n\nLua provides a registry, a predefined table that can be used by any C code to store whatever Lua values it needs to store. The registry table is always accessible at pseudo-index `LUA_REGISTRYINDEX`. Any C library can store data into this table, but it must take care to choose keys that are different from those used by other libraries, to avoid collisions. Typically, you should use as key a string containing your library name, or a light userdata with the address of a C object in your code, or any Lua object created by your code. As with variable names, string keys starting with an underscore followed by uppercase letters are reserved for Lua.\n\nThe integer keys in the registry are used by the reference mechanism (see `luaL_ref`) and by some predefined values. Therefore, integer keys in the registry must not be used for other purposes.\n\nWhen you create a new Lua state, its registry comes with some predefined values. These predefined values are indexed with integer keys defined as constants in `lua.h`. The following constants are defined:\n\n * `LUA_RIDX_MAINTHREAD`: At this index the registry has the main thread of the state. (The main thread is the one created together with the state.)\n\n * `LUA_RIDX_GLOBALS`: At this index the registry has the global environment.","name":"_4_3","type":"manual","def":"4.3 – Registry"},{"doc":"3.3 – Statements\n\nLua supports an almost conventional set of statements, similar to those in other conventional languages. This set includes blocks, assignments, control structures, function calls, and variable declarations.","name":"_3_3","type":"manual","def":"3.3 – Statements"},{"doc":"2.5.4 – Weak Tables\n\nA weak table is a table whose elements are weak references. A weak reference is ignored by the garbage collector. In other words, if the only references to an object are weak references, then the garbage collector will collect that object.\n\nA weak table can have weak keys, weak values, or both. A table with weak values allows the collection of its values, but prevents the collection of its keys. A table with both weak keys and weak values allows the collection of both keys and values. In any case, if either the key or the value is collected, the whole pair is removed from the table. The weakness of a table is controlled by the `__mode` field of its metatable. This metavalue, if present, must be one of the following strings: \"`k`\", for a table with weak keys; \"`v`\", for a table with weak values; or \"`kv`\", for a table with both weak keys and values.\n\nA table with weak keys and strong values is also called an ephemeron table. In an ephemeron table, a value is considered reachable only if its key is reachable. In particular, if the only reference to a key comes through its value, the pair is removed.\n\nAny change in the weakness of a table may take effect only at the next collect cycle. In particular, if you change the weakness to a stronger mode, Lua may still collect some items from that table before the change takes effect.\n\nOnly objects that have an explicit construction are removed from weak tables. Values, such as numbers and light C functions, are not subject to garbage collection, and therefore are not removed from weak tables (unless their associated values are collected). Although strings are subject to garbage collection, they do not have an explicit construction and their equality is by value; they behave more like values than like objects. Therefore, they are not removed from weak tables.\n\nResurrected objects (that is, objects being finalized and objects accessible only through objects being finalized) have a special behavior in weak tables. They are removed from weak values before running their finalizers, but are removed from weak keys only in the next collection after running their finalizers, when such objects are actually freed. This behavior allows the finalizer to access properties associated with the object through weak tables.\n\nIf a weak table is among the resurrected objects in a collection cycle, it may not be properly cleared until the next cycle.","name":"_2_5_4","type":"manual","def":"2.5.4 – Weak Tables"},{"doc":"3.4.7 – The Length Operator\n\nThe length operator is denoted by the unary prefix operator `#`.\n\nThe length of a string is its number of bytes. (That is the usual meaning of string length when each character is one byte.)\n\nThe length operator applied on a table returns a border in that table. A border in a table `t` is any natural number that satisfies the following condition:\n\n~~~\n\n (border == 0 or t[border] ~= nil) and t[border + 1] == nil\n\n~~~\n\nIn words, a border is any (natural) index present in the table that is followed by an absent index (or zero, when index 1 is absent).\n\nA table with exactly one border is called a sequence. For instance, the table `{10, 20, 30, 40, 50}` is a sequence, as it has only one border (5). The table `{10, 20, 30, nil, 50}` has two borders (3 and 5), and therefore it is not a sequence. (The nil at index 4 is called a hole.) The table `{nil, 20, 30, nil, nil, 60, nil}` has three borders (0, 3, and 6) and three holes (at indices 1, 4, and 5), so it is not a sequence, too. The table `{}` is a sequence with border 0. Note that non-natural keys do not interfere with whether a table is a sequence.\n\nWhen `t` is a sequence, `#t` returns its only border, which corresponds to the intuitive notion of the length of the sequence. When `t` is not a sequence, `#t` can return any of its borders. (The exact one depends on details of the internal representation of the table, which in turn can depend on how the table was populated and the memory addresses of its non-numeric keys.)\n\nThe computation of the length of a table has a guaranteed worst time of O(log n), where n is the largest natural key in the table.\n\nA program can modify the behavior of the length operator for any value but strings through the `__len` metamethod (see §2.4).","name":"_3_4_7","type":"manual","def":"3.4.7 – The Length Operator"},{"doc":"3.4.4 – Relational Operators\n\nLua supports the following relational operators:\n\n * `==`: equality\n * `~=`: inequality\n * `<`: less than\n * `>`: greater than\n * `<=`: less or equal\n * `>=`: greater or equal\n\nThese operators always result in false or true.\n\nEquality (`==`) first compares the type of its operands. If the types are different, then the result is false. Otherwise, the values of the operands are compared. Strings are equal if they have the same byte content. Numbers are equal if they denote the same mathematical value.\n\nTables, userdata, and threads are compared by reference: two objects are considered equal only if they are the same object. Every time you create a new object (a table, a userdata, or a thread), this new object is different from any previously existing object. A function is always equal to itself. Functions with any detectable difference (different behavior, different definition) are always different. Functions created at different times but with no detectable differences may be classified as equal or not (depending on internal caching details).\n\nYou can change the way that Lua compares tables and userdata by using the `__eq` metamethod (see §2.4).\n\nEquality comparisons do not convert strings to numbers or vice versa. Thus, `\"0\"==0` evaluates to false, and `t[0]` and `t[\"0\"]` denote different entries in a table.\n\nThe operator `~=` is exactly the negation of equality (`==`).\n\nThe order operators work as follows. If both arguments are numbers, then they are compared according to their mathematical values, regardless of their subtypes. Otherwise, if both arguments are strings, then their values are compared according to the current locale. Otherwise, Lua tries to call the `__lt` or the `__le` metamethod (see §2.4). A comparison `a > b` is translated to `b < a` and `a >= b` is translated to `b <= a`.\n\nFollowing the IEEE 754 standard, the special value NaN is considered neither less than, nor equal to, nor greater than any value, including itself.","name":"_3_4_4","type":"manual","def":"3.4.4 – Relational Operators"},{"doc":"6.4 – String Manipulation\n\nThis library provides generic functions for string manipulation, such as finding and extracting substrings, and pattern matching. When indexing a string in Lua, the first character is at position 1 (not at 0, as in C). Indices are allowed to be negative and are interpreted as indexing backwards, from the end of the string. Thus, the last character is at position -1, and so on.\n\nThe string library provides all its functions inside the table `string`. It also sets a metatable for strings where the `__index` field points to the `string` table. Therefore, you can use the string functions in object-oriented style. For instance, `string.byte(s,i)` can be written as `s:byte(i)`.\n\nThe string library assumes one-byte character encodings.\n\n--------------------------------------------------------------------------------\n\n`string.byte (s [, i [, j]])`\n\nReturns the internal numeric codes of the characters `s[i]`, `s[i+1]`, ..., `s[j]`. The default value for `i` is 1; the default value for `j` is `i`. These indices are corrected following the same rules of function `string.sub`.\n\nNumeric codes are not necessarily portable across platforms.\n\n--------------------------------------------------------------------------------\n\n`string.char (···)`\n\nReceives zero or more integers. Returns a string with length equal to the number of arguments, in which each character has the internal numeric code equal to its corresponding argument.\n\nNumeric codes are not necessarily portable across platforms.\n\n--------------------------------------------------------------------------------\n\n`string.dump (function [, strip])`\n\nReturns a string containing a binary representation (a binary chunk) of the given function, so that a later `load` on this string returns a copy of the function (but with new upvalues). If `strip` is a true value, the binary representation may not include all debug information about the function, to save space.\n\nFunctions with upvalues have only their number of upvalues saved. When (re)loaded, those upvalues receive fresh instances. (See the `load` function for details about how these upvalues are initialized. You can use the debug library to serialize and reload the upvalues of a function in a way adequate to your needs.)\n\n--------------------------------------------------------------------------------\n\n`string.find (s, pattern [, init [, plain]])`\n\nLooks for the first match of `pattern` (see §6.4.1) in the string `s`. If it finds a match, then `find` returns the indices of `s` where this occurrence starts and ends; otherwise, it returns fail. A third, optional numeric argument `init` specifies where to start the search; its default value is 1 and can be negative. A value of true as a fourth, optional argument `plain` turns off the pattern matching facilities, so the function does a plain \"find substring\" operation, with no characters in `pattern` being considered magic.\n\nIf the pattern has captures, then in a successful match the captured values are also returned, after the two indices.\n\n--------------------------------------------------------------------------------\n\n`string.format (formatstring, ···)`\n\nReturns a formatted version of its variable number of arguments following the description given in its first argument, which must be a string. The format string follows the same rules as the ISO C function `sprintf`. The only differences are that the conversion specifiers and modifiers `*`, `h`, `L`, `l`, and `n` are not supported and that there is an extra specifier, `q`.\n\nThe specifier `q` formats booleans, nil, numbers, and strings in a way that the result is a valid constant in Lua source code. Booleans and nil are written in the obvious way (`true`, `false`, `nil`). Floats are written in hexadecimal, to preserve full precision. A string is written between double quotes, using escape sequences when necessary to ensure that it can safely be read back by the Lua interpreter. For instance, the call\n\n~~~\n\n string.format('%q', 'a string with \"quotes\" and \\n new line')\n\n~~~\n\nmay produce the string:\n\n~~~\n\n \"a string with \\\"quotes\\\" and \\\n new line\"\n\n~~~\n\nThis specifier does not support modifiers (flags, width, length).\n\nThe conversion specifiers `A`, `a`, `E`, `e`, `f`, `G`, and `g` all expect a number as argument. The specifiers `c`, `d`, `i`, `o`, `u`, `X`, and `x` expect an integer. When Lua is compiled with a C89 compiler, the specifiers `A` and `a` (hexadecimal floats) do not support modifiers.\n\nThe specifier `s` expects a string; if its argument is not a string, it is converted to one following the same rules of `tostring`. If the specifier has any modifier, the corresponding string argument should not contain embedded zeros.\n\nThe specifier `p` formats the pointer returned by `lua_topointer`. That gives a unique string identifier for tables, userdata, threads, strings, and functions. For other values (numbers, nil, booleans), this specifier results in a string representing the pointer `NULL`.\n\n--------------------------------------------------------------------------------\n\n`string.gmatch (s, pattern [, init])`\n\nReturns an iterator function that, each time it is called, returns the next captures from `pattern` (see §6.4.1) over the string `s`. If `pattern` specifies no captures, then the whole match is produced in each call. A third, optional numeric argument `init` specifies where to start the search; its default value is 1 and can be negative.\n\nAs an example, the following loop will iterate over all the words from string `s`, printing one per line:\n\n~~~\n\n s = \"hello world from Lua\"\n for w in string.gmatch(s, \"%a+\") do\n print(w)\n end\n\n~~~\n\nThe next example collects all pairs `key=value` from the given string into a table:\n\n~~~\n\n t = {}\n s = \"from=world, to=Lua\"\n for k, v in string.gmatch(s, \"(%w+)=(%w+)\") do\n t[k] = v\n end\n\n~~~\n\nFor this function, a caret '`^`' at the start of a pattern does not work as an anchor, as this would prevent the iteration.\n\n--------------------------------------------------------------------------------\n\n`string.gsub (s, pattern, repl [, n])`\n\nReturns a copy of `s` in which all (or the first `n`, if given) occurrences of the `pattern` (see §6.4.1) have been replaced by a replacement string specified by `repl`, which can be a string, a table, or a function. `gsub` also returns, as its second value, the total number of matches that occurred. The name `gsub` comes from Global SUBstitution.\n\nIf `repl` is a string, then its value is used for replacement. The character `%` works as an escape character: any sequence in `repl` of the form `%d`, with d between 1 and 9, stands for the value of the d-th captured substring; the sequence `%0` stands for the whole match; the sequence `%%` stands for a single `%`.\n\nIf `repl` is a table, then the table is queried for every match, using the first capture as the key.\n\nIf `repl` is a function, then this function is called every time a match occurs, with all captured substrings passed as arguments, in order.\n\nIn any case, if the pattern specifies no captures, then it behaves as if the whole pattern was inside a capture.\n\nIf the value returned by the table query or by the function call is a string or a number, then it is used as the replacement string; otherwise, if it is false or nil, then there is no replacement (that is, the original match is kept in the string).\n\nHere are some examples:\n\n~~~\n\n x = string.gsub(\"hello world\", \"(%w+)\", \"%1 %1\")\n --> x=\"hello hello world world\"\n \n x = string.gsub(\"hello world\", \"%w+\", \"%0 %0\", 1)\n --> x=\"hello hello world\"\n \n x = string.gsub(\"hello world from Lua\", \"(%w+)%s*(%w+)\", \"%2 %1\")\n --> x=\"world hello Lua from\"\n \n x = string.gsub(\"home = $HOME, user = $USER\", \"%$(%w+)\", os.getenv)\n --> x=\"home = \/home\/roberto, user = roberto\"\n \n x = string.gsub(\"4+5 = $return 4+5$\", \"%$(.-)%$\", function (s)\n return load(s)()\n end)\n --> x=\"4+5 = 9\"\n \n local t = {name=\"lua\", version=\"5.4\"}\n x = string.gsub(\"$name-$version.tar.gz\", \"%$(%w+)\", t)\n --> x=\"lua-5.4.tar.gz\"\n\n~~~\n\n--------------------------------------------------------------------------------\n\n`string.len (s)`\n\nReceives a string and returns its length. The empty string `\"\"` has length 0. Embedded zeros are counted, so `\"a\\000bc\\000\"` has length 5.\n\n--------------------------------------------------------------------------------\n\n`string.lower (s)`\n\nReceives a string and returns a copy of this string with all uppercase letters changed to lowercase. All other characters are left unchanged. The definition of what an uppercase letter is depends on the current locale.\n\n--------------------------------------------------------------------------------\n\n`string.match (s, pattern [, init])`\n\nLooks for the first match of the `pattern` (see §6.4.1) in the string `s`. If it finds one, then `match` returns the captures from the pattern; otherwise it returns fail. If `pattern` specifies no captures, then the whole match is returned. A third, optional numeric argument `init` specifies where to start the search; its default value is 1 and can be negative.\n\n--------------------------------------------------------------------------------\n\n`string.pack (fmt, v1, v2, ···)`\n\nReturns a binary string containing the values `v1`, `v2`, etc. serialized in binary form (packed) according to the format string `fmt` (see §6.4.2).\n\n--------------------------------------------------------------------------------\n\n`string.packsize (fmt)`\n\nReturns the size of a string resulting from `string.pack` with the given format. The format string cannot have the variable-length options '`s`' or '`z`' (see §6.4.2).\n\n--------------------------------------------------------------------------------\n\n`string.rep (s, n [, sep])`\n\nReturns a string that is the concatenation of `n` copies of the string `s` separated by the string `sep`. The default value for `sep` is the empty string (that is, no separator). Returns the empty string if `n` is not positive.\n\n(Note that it is very easy to exhaust the memory of your machine with a single call to this function.)\n\n--------------------------------------------------------------------------------\n\n`string.reverse (s)`\n\nReturns a string that is the string `s` reversed.\n\n--------------------------------------------------------------------------------\n\n`string.sub (s, i [, j])`\n\nReturns the substring of `s` that starts at `i` and continues until `j`; `i` and `j` can be negative. If `j` is absent, then it is assumed to be equal to -1 (which is the same as the string length). In particular, the call `string.sub(s,1,j)` returns a prefix of `s` with length `j`, and `string.sub(s, -i)` (for a positive `i`) returns a suffix of `s` with length `i`.\n\nIf, after the translation of negative indices, `i` is less than 1, it is corrected to 1. If `j` is greater than the string length, it is corrected to that length. If, after these corrections, `i` is greater than `j`, the function returns the empty string.\n\n--------------------------------------------------------------------------------\n\n`string.unpack (fmt, s [, pos])`\n\nReturns the values packed in string `s` (see `string.pack`) according to the format string `fmt` (see §6.4.2). An optional `pos` marks where to start reading in `s` (default is 1). After the read values, this function also returns the index of the first unread byte in `s`.\n\n--------------------------------------------------------------------------------\n\n`string.upper (s)`\n\nReceives a string and returns a copy of this string with all lowercase letters changed to uppercase. All other characters are left unchanged. The definition of what a lowercase letter is depends on the current locale.","name":"_6_4","type":"manual","def":"6.4 – String Manipulation"},{"doc":"3.4.5 – Logical Operators\n\nThe logical operators in Lua are and, or, and not. Like the control structures (see §3.3.4), all logical operators consider both false and nil as false and anything else as true.\n\nThe negation operator not always returns false or true. The conjunction operator and returns its first argument if this value is false or nil; otherwise, and returns its second argument. The disjunction operator or returns its first argument if this value is different from nil and false; otherwise, or returns its second argument. Both and and or use short-circuit evaluation; that is, the second operand is evaluated only if necessary. Here are some examples:\n\n~~~\n\n 10 or 20 --> 10\n 10 or error() --> 10\n nil or \"a\" --> \"a\"\n nil and 10 --> nil\n false and error() --> false\n false and nil --> false\n false or nil --> nil\n 10 and 20 --> 20\n\n~~~","name":"_3_4_5","type":"manual","def":"3.4.5 – Logical Operators"},{"doc":"3.4.8 – Precedence\n\nOperator precedence in Lua follows the table below, from lower to higher priority:\n\n~~~\n\n or\n and\n < > <= >= ~= ==\n |\n ~\n &\n << >>\n ..\n + -\n * \/ \/\/ %\n unary operators (not # - ~)\n ^\n\n~~~\n\nAs usual, you can use parentheses to change the precedences of an expression. The concatenation ('`..`') and exponentiation ('`^`') operators are right associative. All other binary operators are left associative.","name":"_3_4_8","type":"manual","def":"3.4.8 – Precedence"},{"doc":"3.2 – Variables\n\nVariables are places that store values. There are three kinds of variables in Lua: global variables, local variables, and table fields.\n\nA single name can denote a global variable or a local variable (or a function's formal parameter, which is a particular kind of local variable):\n\n~~~\n\n\tvar ::= Name\n\n~~~\n\nName denotes identifiers (see §3.1).\n\nAny variable name is assumed to be global unless explicitly declared as a local (see §3.3.7). Local variables are lexically scoped: local variables can be freely accessed by functions defined inside their scope (see §3.5).\n\nBefore the first assignment to a variable, its value is nil.\n\nSquare brackets are used to index a table:\n\n~~~\n\n\tvar ::= prefixexp ‘[’ exp ‘]’\n\n~~~\n\nThe meaning of accesses to table fields can be changed via metatables (see §2.4).\n\nThe syntax `var.Name` is just syntactic sugar for `var[\"Name\"]`:\n\n~~~\n\n\tvar ::= prefixexp ‘.’ Name\n\n~~~\n\nAn access to a global variable `x` is equivalent to `_ENV.x`. Due to the way that chunks are compiled, the variable `_ENV` itself is never global (see §2.2).","name":"_3_2","type":"manual","def":"3.2 – Variables"},{"doc":"4.2 – C Closures\n\nWhen a C function is created, it is possible to associate some values with it, thus creating a C closure (see `lua_pushcclosure`); these values are called upvalues and are accessible to the function whenever it is called.\n\nWhenever a C function is called, its upvalues are located at specific pseudo-indices. These pseudo-indices are produced by the macro `lua_upvalueindex`. The first upvalue associated with a function is at index `lua_upvalueindex(1)`, and so on. Any access to `lua_upvalueindex(n)`, where n is greater than the number of upvalues of the current function (but not greater than 256, which is one plus the maximum number of upvalues in a closure), produces an acceptable but invalid index.\n\nA C closure can also change the values of its corresponding upvalues.","name":"_4_2","type":"manual","def":"4.2 – C Closures"},{"doc":"2.2 – Environments and the Global Environment\n\nAs we will discuss further in §3.2 and §3.3.3, any reference to a free name (that is, a name not bound to any declaration) `var` is syntactically translated to `_ENV.var`. Moreover, every chunk is compiled in the scope of an external local variable named `_ENV` (see §3.3.2), so `_ENV` itself is never a free name in a chunk.\n\nDespite the existence of this external `_ENV` variable and the translation of free names, `_ENV` is a completely regular name. In particular, you can define new variables and parameters with that name. Each reference to a free name uses the `_ENV` that is visible at that point in the program, following the usual visibility rules of Lua (see §3.5).\n\nAny table used as the value of `_ENV` is called an environment.\n\nLua keeps a distinguished environment called the global environment. This value is kept at a special index in the C registry (see §4.3). In Lua, the global variable `_G` is initialized with this same value. (`_G` is never used internally, so changing its value will affect only your own code.)\n\nWhen Lua loads a chunk, the default value for its `_ENV` variable is the global environment (see `load`). Therefore, by default, free names in Lua code refer to entries in the global environment and, therefore, they are also called global variables. Moreover, all standard libraries are loaded in the global environment and some functions there operate on that environment. You can use `load` (or `loadfile`) to load a chunk with a different environment. (In C, you have to load the chunk and then change the value of its first upvalue; see `lua_setupvalue`.)","name":"_2_2","type":"manual","def":"2.2 – Environments and the Global Environment"},{"doc":"6.10 – The Debug Library\n\nThis library provides the functionality of the debug interface (§4.7) to Lua programs. You should exert care when using this library. Several of its functions violate basic assumptions about Lua code (e.g., that variables local to a function cannot be accessed from outside; that userdata metatables cannot be changed by Lua code; that Lua programs do not crash) and therefore can compromise otherwise secure code. Moreover, some functions in this library may be slow.\n\nAll functions in this library are provided inside the `debug` table. All functions that operate over a thread have an optional first argument which is the thread to operate over. The default is always the current thread.\n\n--------------------------------------------------------------------------------\n\n`debug.debug ()`\n\nEnters an interactive mode with the user, running each string that the user enters. Using simple commands and other debug facilities, the user can inspect global and local variables, change their values, evaluate expressions, and so on. A line containing only the word `cont` finishes this function, so that the caller continues its execution.\n\nNote that commands for `debug.debug` are not lexically nested within any function and so have no direct access to local variables.\n\n--------------------------------------------------------------------------------\n\n`debug.gethook ([thread])`\n\nReturns the current hook settings of the thread, as three values: the current hook function, the current hook mask, and the current hook count, as set by the `debug.sethook` function.\n\nReturns fail if there is no active hook.\n\n--------------------------------------------------------------------------------\n\n`debug.getinfo ([thread,] f [, what])`\n\nReturns a table with information about a function. You can give the function directly or you can give a number as the value of `f`, which means the function running at level `f` of the call stack of the given thread: level 0 is the current function (`getinfo` itself); level 1 is the function that called `getinfo` (except for tail calls, which do not count on the stack); and so on. If `f` is a number greater than the number of active functions, then `getinfo` returns fail.\n\nThe returned table can contain all the fields returned by `lua_getinfo`, with the string `what` describing which fields to fill in. The default for `what` is to get all information available, except the table of valid lines. If present, the option '`f`' adds a field named `func` with the function itself. If present, the option '`L`' adds a field named `activelines` with the table of valid lines.\n\nFor instance, the expression `debug.getinfo(1,\"n\").name` returns a name for the current function, if a reasonable name can be found, and the expression `debug.getinfo(print)` returns a table with all available information about the `print` function.\n\n--------------------------------------------------------------------------------\n\n`debug.getlocal ([thread,] f, local)`\n\nThis function returns the name and the value of the local variable with index `local` of the function at level `f` of the stack. This function accesses not only explicit local variables, but also parameters and temporary values.\n\nThe first parameter or local variable has index 1, and so on, following the order that they are declared in the code, counting only the variables that are active in the current scope of the function. Compile-time constants may not appear in this listing, if they were optimized away by the compiler. Negative indices refer to vararg arguments; -1 is the first vararg argument. The function returns fail if there is no variable with the given index, and raises an error when called with a level out of range. (You can call `debug.getinfo` to check whether the level is valid.)\n\nVariable names starting with '`(`' (open parenthesis) represent variables with no known names (internal variables such as loop control variables, and variables from chunks saved without debug information).\n\nThe parameter `f` may also be a function. In that case, `getlocal` returns only the name of function parameters.\n\n--------------------------------------------------------------------------------\n\n`debug.getmetatable (value)`\n\nReturns the metatable of the given `value` or nil if it does not have a metatable.\n\n--------------------------------------------------------------------------------\n\n`debug.getregistry ()`\n\nReturns the registry table (see §4.3).\n\n--------------------------------------------------------------------------------\n\n`debug.getupvalue (f, up)`\n\nThis function returns the name and the value of the upvalue with index `up` of the function `f`. The function returns fail if there is no upvalue with the given index.\n\n(For Lua functions, upvalues are the external local variables that the function uses, and that are consequently included in its closure.)\n\nFor C functions, this function uses the empty string `\"\"` as a name for all upvalues.\n\nVariable name '`?`' (interrogation mark) represents variables with no known names (variables from chunks saved without debug information).\n\n--------------------------------------------------------------------------------\n\n`debug.getuservalue (u, n)`\n\nReturns the `n`-th user value associated to the userdata `u` plus a boolean, false if the userdata does not have that value.\n\n--------------------------------------------------------------------------------\n\n`debug.setcstacklimit (limit)`\n\nSets a new limit for the C stack. This limit controls how deeply nested calls can go in Lua, with the intent of avoiding a stack overflow. A limit too small restricts recursive calls pointlessly; a limit too large exposes the interpreter to stack-overflow crashes. Unfortunately, there is no way to know a priori the maximum safe limit for a platform.\n\nEach call made from Lua code counts one unit. Other operations (e.g., calls made from C to Lua or resuming a coroutine) may have a higher cost.\n\nThis function has the following restrictions:\n\n * It can only be called from the main coroutine (thread);\n * It cannot be called while handling a stack-overflow error;\n * `limit` must be less than 40000;\n * `limit` cannot be less than the amount of C stack in use.\n\nIf a call does not respect some restriction, it returns a false value. Otherwise, the call returns the old limit.\n\n--------------------------------------------------------------------------------\n\n`debug.sethook ([thread,] hook, mask [, count])`\n\nSets the given function as the debug hook. The string `mask` and the number `count` describe when the hook will be called. The string mask may have any combination of the following characters, with the given meaning:\n\n * '`c`': the hook is called every time Lua calls a function;\n * '`r`': the hook is called every time Lua returns from a function;\n * '`l`': the hook is called every time Lua enters a new line of code.\n\nMoreover, with a `count` different from zero, the hook is called also after every `count` instructions.\n\nWhen called without arguments, `debug.sethook` turns off the hook.\n\nWhen the hook is called, its first parameter is a string describing the event that has triggered its call: `\"call\"`, `\"tail call\"`, `\"return\"`, `\"line\"`, and `\"count\"`. For line events, the hook also gets the new line number as its second parameter. Inside a hook, you can call `getinfo` with level 2 to get more information about the running function. (Level 0 is the `getinfo` function, and level 1 is the hook function.)\n\n--------------------------------------------------------------------------------\n\n`debug.setlocal ([thread,] level, local, value)`\n\nThis function assigns the value `value` to the local variable with index `local` of the function at level `level` of the stack. The function returns fail if there is no local variable with the given index, and raises an error when called with a `level` out of range. (You can call `getinfo` to check whether the level is valid.) Otherwise, it returns the name of the local variable.\n\nSee `debug.getlocal` for more information about variable indices and names.\n\n--------------------------------------------------------------------------------\n\n`debug.setmetatable (value, table)`\n\nSets the metatable for the given `value` to the given `table` (which can be nil). Returns `value`.\n\n--------------------------------------------------------------------------------\n\n`debug.setupvalue (f, up, value)`\n\nThis function assigns the value `value` to the upvalue with index `up` of the function `f`. The function returns fail if there is no upvalue with the given index. Otherwise, it returns the name of the upvalue.\n\nSee `debug.getupvalue` for more information about upvalues.\n\n--------------------------------------------------------------------------------\n\n`debug.setuservalue (udata, value, n)`\n\nSets the given `value` as the `n`-th user value associated to the given `udata`. `udata` must be a full userdata.\n\nReturns `udata`, or fail if the userdata does not have that value.\n\n--------------------------------------------------------------------------------\n\n`debug.traceback ([thread,] [message [, level]])`\n\nIf `message` is present but is neither a string nor nil, this function returns `message` without further processing. Otherwise, it returns a string with a traceback of the call stack. The optional `message` string is appended at the beginning of the traceback. An optional `level` number tells at which level to start the traceback (default is 1, the function calling `traceback`).\n\n--------------------------------------------------------------------------------\n\n`debug.upvalueid (f, n)`\n\nReturns a unique identifier (as a light userdata) for the upvalue numbered `n` from the given function.\n\nThese unique identifiers allow a program to check whether different closures share upvalues. Lua closures that share an upvalue (that is, that access a same external local variable) will return identical ids for those upvalue indices.\n\n--------------------------------------------------------------------------------\n\n`debug.upvaluejoin (f1, n1, f2, n2)`\n\nMake the `n1`-th upvalue of the Lua closure `f1` refer to the `n2`-th upvalue of the Lua closure `f2`.","name":"_6_10","type":"manual","def":"6.10 – The Debug Library"},{"doc":"2.5.3 – Garbage-Collection Metamethods\n\nYou can set garbage-collector metamethods for tables and, using the C API, for full userdata (see §2.4). These metamethods, called finalizers, are called when the garbage collector detects that the corresponding table or userdata is dead. Finalizers allow you to coordinate Lua's garbage collection with external resource management such as closing files, network or database connections, or freeing your own memory.\n\nFor an object (table or userdata) to be finalized when collected, you must mark it for finalization.\n\nYou mark an object for finalization when you set its metatable and the metatable has a field indexed by the string \"`__gc`\". Note that if you set a metatable without a `__gc` field and later create that field in the metatable, the object will not be marked for finalization.\n\nWhen a marked object becomes dead, it is not collected immediately by the garbage collector. Instead, Lua puts it in a list. After the collection, Lua goes through that list. For each object in the list, it checks the object's `__gc` metamethod: If it is present, Lua calls it with the object as its single argument.\n\nAt the end of each garbage-collection cycle, the finalizers are called in the reverse order that the objects were marked for finalization, among those collected in that cycle; that is, the first finalizer to be called is the one associated with the object marked last in the program. The execution of each finalizer may occur at any point during the execution of the regular code.\n\nBecause the object being collected must still be used by the finalizer, that object (and other objects accessible only through it) must be resurrected by Lua. Usually, this resurrection is transient, and the object memory is freed in the next garbage-collection cycle. However, if the finalizer stores the object in some global place (e.g., a global variable), then the resurrection is permanent. Moreover, if the finalizer marks a finalizing object for finalization again, its finalizer will be called again in the next cycle where the object is dead. In any case, the object memory is freed only in a GC cycle where the object is dead and not marked for finalization.\n\nWhen you close a state (see `lua_close`), Lua calls the finalizers of all objects marked for finalization, following the reverse order that they were marked. If any finalizer marks objects for collection during that phase, these marks have no effect.\n\nFinalizers cannot yield. Except for that, they can do anything, such as raise errors, create new objects, or even run the garbage collector. However, because they can run in unpredictable times, it is good practice to restrict each finalizer to the minimum necessary to properly release its associated resource.\n\nAny error while running a finalizer generates a warning; the error is not propagated.","name":"_2_5_3","type":"manual","def":"2.5.3 – Garbage-Collection Metamethods"},{"doc":"3.4.3 – Coercions and Conversions\n\nLua provides some automatic conversions between some types and representations at run time. Bitwise operators always convert float operands to integers. Exponentiation and float division always convert integer operands to floats. All other arithmetic operations applied to mixed numbers (integers and floats) convert the integer operand to a float. The C API also converts both integers to floats and floats to integers, as needed. Moreover, string concatenation accepts numbers as arguments, besides strings.\n\nIn a conversion from integer to float, if the integer value has an exact representation as a float, that is the result. Otherwise, the conversion gets the nearest higher or the nearest lower representable value. This kind of conversion never fails.\n\nThe conversion from float to integer checks whether the float has an exact representation as an integer (that is, the float has an integral value and it is in the range of integer representation). If it does, that representation is the result. Otherwise, the conversion fails.\n\nSeveral places in Lua coerce strings to numbers when necessary. In particular, the string library sets metamethods that try to coerce strings to numbers in all arithmetic operations. If the conversion fails, the library calls the metamethod of the other operand (if present) or it raises an error. Note that bitwise operators do not do this coercion.\n\nNonetheless, it is always a good practice not to rely on these implicit coercions, as they are not always applied; in particular, `\"1\"==1` is false and `\"1\"<1` raises an error (see §3.4.4). These coercions exist mainly for compatibility and may be removed in future versions of the language.\n\nA string is converted to an integer or a float following its syntax and the rules of the Lua lexer. The string may have also leading and trailing whitespaces and a sign. All conversions from strings to numbers accept both a dot and the current locale mark as the radix character. (The Lua lexer, however, accepts only a dot.) If the string is not a valid numeral, the conversion fails. If necessary, the result of this first step is then converted to a specific number subtype following the previous rules for conversions between floats and integers.\n\nThe conversion from numbers to strings uses a non-specified human-readable format. To convert numbers to strings in any specific way, use the function `string.format`.","name":"_3_4_3","type":"manual","def":"3.4.3 – Coercions and Conversions"},{"doc":"3.3.7 – Local Declarations\n\nLocal variables can be declared anywhere inside a block. The declaration can include an initialization:\n\n~~~\n\n\tstat ::= local attnamelist [‘=’ explist]\n\tattnamelist ::= Name attrib {‘,’ Name attrib}\n\n~~~\n\nIf present, an initial assignment has the same semantics of a multiple assignment (see §3.3.3). Otherwise, all variables are initialized with nil.\n\nEach variable name may be postfixed by an attribute (a name between angle brackets):\n\n~~~\n\n\tattrib ::= [‘<’ Name ‘>’]\n\n~~~\n\nThere are two possible attributes: `const`, which declares a constant variable, that is, a variable that cannot be assigned to after its initialization; and `close`, which declares a to-be-closed variable (see §3.3.8). A list of variables can contain at most one to-be-closed variable.\n\nA chunk is also a block (see §3.3.2), and so local variables can be declared in a chunk outside any explicit block.\n\nThe visibility rules for local variables are explained in §3.5.","name":"_3_3_7","type":"manual","def":"3.3.7 – Local Declarations"},{"doc":"3.4.10 – Function Calls\n\nA function call in Lua has the following syntax:\n\n~~~\n\n\tfunctioncall ::= prefixexp args\n\n~~~\n\nIn a function call, first prefixexp and args are evaluated. If the value of prefixexp has type function, then this function is called with the given arguments. Otherwise, if present, the prefixexp `__call` metamethod is called: its first argument is the value of prefixexp, followed by the original call arguments (see §2.4).\n\nThe form\n\n~~~\n\n\tfunctioncall ::= prefixexp ‘:’ Name args\n\n~~~\n\ncan be used to emulate methods. A call `v:name(args)` is syntactic sugar for `v.name(v,args)`, except that `v` is evaluated only once.\n\nArguments have the following syntax:\n\n~~~\n\n\targs ::= ‘(’ [explist] ‘)’\n\targs ::= tableconstructor\n\targs ::= LiteralString\n\n~~~\n\nAll argument expressions are evaluated before the call. A call of the form `f{fields}` is syntactic sugar for `f({fields})`; that is, the argument list is a single new table. A call of the form `f'string'` (or `f\"string\"` or `f[[string]]`) is syntactic sugar for `f('string')`; that is, the argument list is a single literal string.\n\nA call of the form `return functioncall` not in the scope of a to-be-closed variable is called a tail call. Lua implements proper tail calls (or proper tail recursion): in a tail call, the called function reuses the stack entry of the calling function. Therefore, there is no limit on the number of nested tail calls that a program can execute. However, a tail call erases any debug information about the calling function. Note that a tail call only happens with a particular syntax, where the return has one single function call as argument, and it is outside the scope of any to-be-closed variable. This syntax makes the calling function return exactly the returns of the called function, without any intervening action. So, none of the following examples are tail calls:\n\n~~~\n\n return (f(x)) -- results adjusted to 1\n return 2 * f(x) -- result multiplied by 2\n return x, f(x) -- additional results\n f(x); return -- results discarded\n return x or f(x) -- results adjusted to 1\n\n~~~","name":"_3_4_10","type":"manual","def":"3.4.10 – Function Calls"},{"doc":"8.1 – Incompatibilities in the Language\n\n * The coercion of strings to numbers in arithmetic and bitwise operations has been removed from the core language. The string library does a similar job for arithmetic (but not for bitwise) operations using the string metamethods. However, unlike in previous versions, the new implementation preserves the implicit type of the numeral in the string. For instance, the result of `\"1\" + \"2\"` now is an integer, not a float.\n\n * Literal decimal integer constants that overflow are read as floats, instead of wrapping around. You can use hexadecimal notation for such constants if you want the old behavior (reading them as integers with wrap around).\n\n * The use of the `__lt` metamethod to emulate `__le` has been removed. When needed, this metamethod must be explicitly defined.\n\n * The semantics of the numerical for loop over integers changed in some details. In particular, the control variable never wraps around.\n\n * A label for a goto cannot be declared where a label with the same name is visible, even if this other label is declared in an enclosing block.\n\n * When finalizing an object, Lua does not ignore `__gc` metamethods that are not functions. Any value will be called, if present. (Non-callable values will generate a warning, like any other error when calling a finalizer.)","name":"_8_1","type":"manual","def":"8.1 – Incompatibilities in the Language"},{"doc":"3.3.2 – Chunks\n\nThe unit of compilation of Lua is called a chunk. Syntactically, a chunk is simply a block:\n\n~~~\n\n\tchunk ::= block\n\n~~~\n\nLua handles a chunk as the body of an anonymous function with a variable number of arguments (see §3.4.11). As such, chunks can define local variables, receive arguments, and return values. Moreover, such anonymous function is compiled as in the scope of an external local variable called `_ENV` (see §2.2). The resulting function always has `_ENV` as its only external variable, even if it does not use that variable.\n\nA chunk can be stored in a file or in a string inside the host program. To execute a chunk, Lua first loads it, precompiling the chunk's code into instructions for a virtual machine, and then Lua executes the compiled code with an interpreter for the virtual machine.\n\nChunks can also be precompiled into binary form; see the program `luac` and the function `string.dump` for details. Programs in source and compiled forms are interchangeable; Lua automatically detects the file type and acts accordingly (see `load`).","name":"_3_3_2","type":"manual","def":"3.3.2 – Chunks"},{"doc":"6.1 – Basic Functions\n\nThe basic library provides core functions to Lua. If you do not include this library in your application, you should check carefully whether you need to provide implementations for some of its facilities.\n\n--------------------------------------------------------------------------------\n\n`assert (v [, message])`\n\nRaises an error if the value of its argument `v` is false (i.e., nil or false); otherwise, returns all its arguments. In case of error, `message` is the error object; when absent, it defaults to \"`assertion failed!`\"\n\n--------------------------------------------------------------------------------\n\n`collectgarbage ([opt [, arg]])`\n\nThis function is a generic interface to the garbage collector. It performs different functions according to its first argument, `opt`:\n\n * \"`collect`\": Performs a full garbage-collection cycle. This is the default option.\n\n * \"`stop`\": Stops automatic execution of the garbage collector. The collector will run only when explicitly invoked, until a call to restart it.\n\n * \"`restart`\": Restarts automatic execution of the garbage collector.\n\n * \"`count`\": Returns the total memory in use by Lua in Kbytes. The value has a fractional part, so that it multiplied by 1024 gives the exact number of bytes in use by Lua.\n\n * \"`step`\": Performs a garbage-collection step. The step \"size\" is controlled by `arg`. With a zero value, the collector will perform one basic (indivisible) step. For non-zero values, the collector will perform as if that amount of memory (in Kbytes) had been allocated by Lua. Returns true if the step finished a collection cycle.\n\n * \"`isrunning`\": Returns a boolean that tells whether the collector is running (i.e., not stopped).\n\n * \"`incremental`\": Change the collector mode to incremental. This option can be followed by three numbers: the garbage-collector pause, the step multiplier, and the step size (see §2.5.1). A zero means to not change that value.\n\n * \"`generational`\": Change the collector mode to generational. This option can be followed by two numbers: the garbage-collector minor multiplier and the major multiplier (see §2.5.2). A zero means to not change that value.\n\nSee §2.5 for more details about garbage collection and some of these options.\n\n--------------------------------------------------------------------------------\n\n`dofile ([filename])`\n\nOpens the named file and executes its content as a Lua chunk. When called without arguments, `dofile` executes the content of the standard input (`stdin`). Returns all values returned by the chunk. In case of errors, `dofile` propagates the error to its caller. (That is, `dofile` does not run in protected mode.)\n\n--------------------------------------------------------------------------------\n\n`error (message [, level])`\n\nRaises an error (see §2.3) with @{message} as the error object. This function never returns.\n\nUsually, `error` adds some information about the error position at the beginning of the message, if the message is a string. The `level` argument specifies how to get the error position. With level 1 (the default), the error position is where the `error` function was called. Level 2 points the error to where the function that called `error` was called; and so on. Passing a level 0 avoids the addition of error position information to the message.\n\n--------------------------------------------------------------------------------\n\n`_G`\n\nA global variable (not a function) that holds the global environment (see §2.2). Lua itself does not use this variable; changing its value does not affect any environment, nor vice versa.\n\n--------------------------------------------------------------------------------\n\n`getmetatable (object)`\n\nIf `object` does not have a metatable, returns nil. Otherwise, if the object's metatable has a `__metatable` field, returns the associated value. Otherwise, returns the metatable of the given object.\n\n--------------------------------------------------------------------------------\n\n`ipairs (t)`\n\nReturns three values (an iterator function, the table `t`, and 0) so that the construction\n\n~~~\n\n for i,v in ipairs(t) do body end\n\n~~~\n\nwill iterate over the key–value pairs (`1,t[1]`), (`2,t[2]`), ..., up to the first absent index.\n\n--------------------------------------------------------------------------------\n\n`load (chunk [, chunkname [, mode [, env]]])`\n\nLoads a chunk.\n\nIf `chunk` is a string, the chunk is this string. If `chunk` is a function, `load` calls it repeatedly to get the chunk pieces. Each call to `chunk` must return a string that concatenates with previous results. A return of an empty string, nil, or no value signals the end of the chunk.\n\nIf there are no syntactic errors, `load` returns the compiled chunk as a function; otherwise, it returns fail plus the error message.\n\nWhen you load a main chunk, the resulting function will always have exactly one upvalue, the `_ENV` variable (see §2.2). However, when you load a binary chunk created from a function (see `string.dump`), the resulting function can have an arbitrary number of upvalues, and there is no guarantee that its first upvalue will be the `_ENV` variable. (A non-main function may not even have an `_ENV` upvalue.)\n\nRegardless, if the resulting function has any upvalues, its first upvalue is set to the value of `env`, if that parameter is given, or to the value of the global environment. Other upvalues are initialized with nil. All upvalues are fresh, that is, they are not shared with any other function.\n\n`chunkname` is used as the name of the chunk for error messages and debug information (see §4.7). When absent, it defaults to `chunk`, if `chunk` is a string, or to \"`=(load)`\" otherwise.\n\nThe string `mode` controls whether the chunk can be text or binary (that is, a precompiled chunk). It may be the string \"`b`\" (only binary chunks), \"`t`\" (only text chunks), or \"`bt`\" (both binary and text). The default is \"`bt`\".\n\nLua does not check the consistency of binary chunks. Maliciously crafted binary chunks can crash the interpreter.\n\n--------------------------------------------------------------------------------\n\n`loadfile ([filename [, mode [, env]]])`\n\nSimilar to `load`, but gets the chunk from file `filename` or from the standard input, if no file name is given.\n\n--------------------------------------------------------------------------------\n\n`next (table [, index])`\n\nAllows a program to traverse all fields of a table. Its first argument is a table and its second argument is an index in this table. A call to `next` returns the next index of the table and its associated value. When called with nil as its second argument, `next` returns an initial index and its associated value. When called with the last index, or with nil in an empty table, `next` returns nil. If the second argument is absent, then it is interpreted as nil. In particular, you can use `next(t)` to check whether a table is empty.\n\nThe order in which the indices are enumerated is not specified, even for numeric indices. (To traverse a table in numerical order, use a numerical for.)\n\nThe behavior of `next` is undefined if, during the traversal, you assign any value to a non-existent field in the table. You may however modify existing fields. In particular, you may set existing fields to nil.\n\n--------------------------------------------------------------------------------\n\n`pairs (t)`\n\nIf `t` has a metamethod `__pairs`, calls it with `t` as argument and returns the first three results from the call.\n\nOtherwise, returns three values: the `next` function, the table `t`, and nil, so that the construction\n\n~~~\n\n for k,v in pairs(t) do body end\n\n~~~\n\nwill iterate over all key–value pairs of table `t`.\n\nSee function `next` for the caveats of modifying the table during its traversal.\n\n--------------------------------------------------------------------------------\n\n`pcall (f [, arg1, ···])`\n\nCalls the function `f` with the given arguments in protected mode. This means that any error inside `f` is not propagated; instead, `pcall` catches the error and returns a status code. Its first result is the status code (a boolean), which is true if the call succeeds without errors. In such case, `pcall` also returns all results from the call, after this first result. In case of any error, `pcall` returns false plus the error object. Note that errors caught by `pcall` do not call a message handler.\n\n--------------------------------------------------------------------------------\n\n`print (···)`\n\nReceives any number of arguments and prints their values to `stdout`, converting each argument to a string following the same rules of `tostring`.\n\nThe function `print` is not intended for formatted output, but only as a quick way to show a value, for instance for debugging. For complete control over the output, use `string.format` and `io.write`.\n\n--------------------------------------------------------------------------------\n\n`rawequal (v1, v2)`\n\nChecks whether `v1` is equal to `v2`, without invoking the `__eq` metamethod. Returns a boolean.\n\n--------------------------------------------------------------------------------\n\n`rawget (table, index)`\n\nGets the real value of `table[index]`, without using the `__index` metavalue. `table` must be a table; `index` may be any value.\n\n--------------------------------------------------------------------------------\n\n`rawlen (v)`\n\nReturns the length of the object `v`, which must be a table or a string, without invoking the `__len` metamethod. Returns an integer.\n\n--------------------------------------------------------------------------------\n\n`rawset (table, index, value)`\n\nSets the real value of `table[index]` to `value`, without using the `__newindex` metavalue. `table` must be a table, `index` any value different from nil and NaN, and `value` any Lua value.\n\nThis function returns `table`.\n\n--------------------------------------------------------------------------------\n\n`select (index, ···)`\n\nIf `index` is a number, returns all arguments after argument number `index`; a negative number indexes from the end (-1 is the last argument). Otherwise, `index` must be the string `\"#\"`, and `select` returns the total number of extra arguments it received.\n\n--------------------------------------------------------------------------------\n\n`setmetatable (table, metatable)`\n\nSets the metatable for the given table. If `metatable` is nil, removes the metatable of the given table. If the original metatable has a `__metatable` field, raises an error.\n\nThis function returns `table`.\n\nTo change the metatable of other types from Lua code, you must use the debug library (§6.10).\n\n--------------------------------------------------------------------------------\n\n`tonumber (e [, base])`\n\nWhen called with no `base`, `tonumber` tries to convert its argument to a number. If the argument is already a number or a string convertible to a number, then `tonumber` returns this number; otherwise, it returns fail.\n\nThe conversion of strings can result in integers or floats, according to the lexical conventions of Lua (see §3.1). The string may have leading and trailing spaces and a sign.\n\nWhen called with `base`, then `e` must be a string to be interpreted as an integer numeral in that base. The base may be any integer between 2 and 36, inclusive. In bases above 10, the letter '`A`' (in either upper or lower case) represents 10, '`B`' represents 11, and so forth, with '`Z`' representing 35. If the string `e` is not a valid numeral in the given base, the function returns fail.\n\n--------------------------------------------------------------------------------\n\n`tostring (v)`\n\nReceives a value of any type and converts it to a string in a human-readable format.\n\nIf the metatable of `v` has a `__tostring` field, then `tostring` calls the corresponding value with `v` as argument, and uses the result of the call as its result. Otherwise, if the metatable of `v` has a `__name` field with a string value, `tostring` may use that string in its final result.\n\nFor complete control of how numbers are converted, use `string.format`.\n\n--------------------------------------------------------------------------------\n\n`type (v)`\n\nReturns the type of its only argument, coded as a string. The possible results of this function are \"`nil`\" (a string, not the value nil), \"`number`\", \"`string`\", \"`boolean`\", \"`table`\", \"`function`\", \"`thread`\", and \"`userdata`\".\n\n--------------------------------------------------------------------------------\n\n`_VERSION`\n\nA global variable (not a function) that holds a string containing the running Lua version. The current value of this variable is \"`Lua 5.4`\".\n\n--------------------------------------------------------------------------------\n\n`warn (msg1, ···)`\n\nEmits a warning with a message composed by the concatenation of all its arguments (which should be strings).\n\nBy convention, a one-piece message starting with '`@`' is intended to be a control message, which is a message to the warning system itself. In particular, the standard warning function in Lua recognizes the control messages \"`@off`\", to stop the emission of warnings, and \"`@on`\", to (re)start the emission; it ignores unknown control messages.\n\n--------------------------------------------------------------------------------\n\n`xpcall (f, msgh [, arg1, ···])`\n\nThis function is similar to `pcall`, except that it sets a new message handler `msgh`.","name":"_6_1","type":"manual","def":"6.1 – Basic Functions"},{"doc":"5.1 – Functions and Types\n\nHere we list all functions and types from the auxiliary library in alphabetical order.\n\n--------------------------------------------------------------------------------\n\n`luaL_addchar`\n\n[-?, +?, m]\n\n~~~\nvoid luaL_addchar (luaL_Buffer *B, char c);\n~~~\n\nAdds the byte `c` to the buffer `B` (see `luaL_Buffer`).\n\n--------------------------------------------------------------------------------\n\n`luaL_addgsub`\n\n[-0, +0, m]\n\n~~~\nconst void luaL_addgsub (luaL_Buffer *B, const char *s,\n const char *p, const char *r);\n~~~\n\nAdds a copy of the string `s` to the buffer `B` (see `luaL_Buffer`), replacing any occurrence of the string `p` with the string `r`.\n\n--------------------------------------------------------------------------------\n\n`luaL_addlstring`\n\n[-?, +?, m]\n\n~~~\nvoid luaL_addlstring (luaL_Buffer *B, const char *s, size_t l);\n~~~\n\nAdds the string pointed to by `s` with length `l` to the buffer `B` (see `luaL_Buffer`). The string can contain embedded zeros.\n\n--------------------------------------------------------------------------------\n\n`luaL_addsize`\n\n[-?, +?, –]\n\n~~~\nvoid luaL_addsize (luaL_Buffer *B, size_t n);\n~~~\n\nAdds to the buffer `B` a string of length `n` previously copied to the buffer area (see `luaL_prepbuffer`).\n\n--------------------------------------------------------------------------------\n\n`luaL_addstring`\n\n[-?, +?, m]\n\n~~~\nvoid luaL_addstring (luaL_Buffer *B, const char *s);\n~~~\n\nAdds the zero-terminated string pointed to by `s` to the buffer `B` (see `luaL_Buffer`).\n\n--------------------------------------------------------------------------------\n\n`luaL_addvalue`\n\n[-1, +?, m]\n\n~~~\nvoid luaL_addvalue (luaL_Buffer *B);\n~~~\n\nAdds the value on the top of the stack to the buffer `B` (see `luaL_Buffer`). Pops the value.\n\nThis is the only function on string buffers that can (and must) be called with an extra element on the stack, which is the value to be added to the buffer.\n\n--------------------------------------------------------------------------------\n\n`luaL_argcheck`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_argcheck (lua_State *L,\n int cond,\n int arg,\n const char *extramsg);\n~~~\n\nChecks whether `cond` is true. If it is not, raises an error with a standard message (see `luaL_argerror`).\n\n--------------------------------------------------------------------------------\n\n`luaL_argerror`\n\n[-0, +0, v]\n\n~~~\nint luaL_argerror (lua_State *L, int arg, const char *extramsg);\n~~~\n\nRaises an error reporting a problem with argument `arg` of the C function that called it, using a standard message that includes `extramsg` as a comment:\n\n~~~\n\n bad argument #arg to 'funcname' (extramsg)\n\n~~~\n\nThis function never returns.\n\n--------------------------------------------------------------------------------\n\n`luaL_argexpected`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_argexpected (lua_State *L,\n int cond,\n int arg,\n const char *tname);\n~~~\n\nChecks whether `cond` is true. If it is not, raises an error about the type of the argument `arg` with a standard message (see `luaL_typeerror`).\n\n--------------------------------------------------------------------------------\n\n`luaL_Buffer`\n\n~~~\ntypedef struct luaL_Buffer luaL_Buffer;\n~~~\n\nType for a string buffer.\n\nA string buffer allows C code to build Lua strings piecemeal. Its pattern of use is as follows:\n\n * First declare a variable `b` of type `luaL_Buffer`.\n\n * Then initialize it with a call `luaL_buffinit(L, &b)`.\n\n * Then add string pieces to the buffer calling any of the `luaL_add*` functions.\n\n * Finish by calling `luaL_pushresult(&b)`. This call leaves the final string on the top of the stack.\n\nIf you know beforehand the maximum size of the resulting string, you can use the buffer like this:\n\n * First declare a variable `b` of type `luaL_Buffer`.\n\n * Then initialize it and preallocate a space of size `sz` with a call `luaL_buffinitsize(L, &b, sz)`.\n\n * Then produce the string into that space.\n\n * Finish by calling `luaL_pushresultsize(&b, sz)`, where `sz` is the total size of the resulting string copied into that space (which may be less than or equal to the preallocated size).\n\nDuring its normal operation, a string buffer uses a variable number of stack slots. So, while using a buffer, you cannot assume that you know where the top of the stack is. You can use the stack between successive calls to buffer operations as long as that use is balanced; that is, when you call a buffer operation, the stack is at the same level it was immediately after the previous buffer operation. (The only exception to this rule is `luaL_addvalue`.) After calling `luaL_pushresult`, the stack is back to its level when the buffer was initialized, plus the final string on its top.\n\n--------------------------------------------------------------------------------\n\n`luaL_buffaddr`\n\n[-0, +0, –]\n\n~~~\nchar *luaL_buffaddr (luaL_Buffer *B);\n~~~\n\nReturns the address of the current content of buffer `B` (see `luaL_Buffer`). Note that any addition to the buffer may invalidate this address.\n\n--------------------------------------------------------------------------------\n\n`luaL_buffinit`\n\n[-0, +0, –]\n\n~~~\nvoid luaL_buffinit (lua_State *L, luaL_Buffer *B);\n~~~\n\nInitializes a buffer `B` (see `luaL_Buffer`). This function does not allocate any space; the buffer must be declared as a variable.\n\n--------------------------------------------------------------------------------\n\n`luaL_bufflen`\n\n[-0, +0, –]\n\n~~~\nsize_t luaL_bufflen (luaL_Buffer *B);\n~~~\n\nReturns the length of the current content of buffer `B` (see `luaL_Buffer`).\n\n--------------------------------------------------------------------------------\n\n`luaL_buffinitsize`\n\n[-?, +?, m]\n\n~~~\nchar *luaL_buffinitsize (lua_State *L, luaL_Buffer *B, size_t sz);\n~~~\n\nEquivalent to the sequence `luaL_buffinit`, `luaL_prepbuffsize`.\n\n--------------------------------------------------------------------------------\n\n`luaL_buffsub`\n\n[-0, +0, –]\n\n~~~\nvoid luaL_buffsub (luaL_Buffer *B, int n);\n~~~\n\nRemoves `n` bytes from the the buffer `B` (see `luaL_Buffer`). The buffer must have at least that many bytes.\n\n--------------------------------------------------------------------------------\n\n`luaL_callmeta`\n\n[-0, +(0|1), e]\n\n~~~\nint luaL_callmeta (lua_State *L, int obj, const char *e);\n~~~\n\nCalls a metamethod.\n\nIf the object at index `obj` has a metatable and this metatable has a field `e`, this function calls this field passing the object as its only argument. In this case this function returns true and pushes onto the stack the value returned by the call. If there is no metatable or no metamethod, this function returns false without pushing any value on the stack.\n\n--------------------------------------------------------------------------------\n\n`luaL_checkany`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_checkany (lua_State *L, int arg);\n~~~\n\nChecks whether the function has an argument of any type (including nil) at position `arg`.\n\n--------------------------------------------------------------------------------\n\n`luaL_checkinteger`\n\n[-0, +0, v]\n\n~~~\nlua_Integer luaL_checkinteger (lua_State *L, int arg);\n~~~\n\nChecks whether the function argument `arg` is an integer (or can be converted to an integer) and returns this integer.\n\n--------------------------------------------------------------------------------\n\n`luaL_checklstring`\n\n[-0, +0, v]\n\n~~~\nconst char *luaL_checklstring (lua_State *L, int arg, size_t *l);\n~~~\n\nChecks whether the function argument `arg` is a string and returns this string; if `l` is not `NULL` fills its referent with the string's length.\n\nThis function uses `lua_tolstring` to get its result, so all conversions and caveats of that function apply here.\n\n--------------------------------------------------------------------------------\n\n`luaL_checknumber`\n\n[-0, +0, v]\n\n~~~\nlua_Number luaL_checknumber (lua_State *L, int arg);\n~~~\n\nChecks whether the function argument `arg` is a number and returns this number converted to a `lua_Number`.\n\n--------------------------------------------------------------------------------\n\n`luaL_checkoption`\n\n[-0, +0, v]\n\n~~~\nint luaL_checkoption (lua_State *L,\n int arg,\n const char *def,\n const char *const lst[]);\n~~~\n\nChecks whether the function argument `arg` is a string and searches for this string in the array `lst` (which must be NULL-terminated). Returns the index in the array where the string was found. Raises an error if the argument is not a string or if the string cannot be found.\n\nIf `def` is not `NULL`, the function uses `def` as a default value when there is no argument `arg` or when this argument is nil.\n\nThis is a useful function for mapping strings to C enums. (The usual convention in Lua libraries is to use strings instead of numbers to select options.)\n\n--------------------------------------------------------------------------------\n\n`luaL_checkstack`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_checkstack (lua_State *L, int sz, const char *msg);\n~~~\n\nGrows the stack size to `top + sz` elements, raising an error if the stack cannot grow to that size. `msg` is an additional text to go into the error message (or `NULL` for no additional text).\n\n--------------------------------------------------------------------------------\n\n`luaL_checkstring`\n\n[-0, +0, v]\n\n~~~\nconst char *luaL_checkstring (lua_State *L, int arg);\n~~~\n\nChecks whether the function argument `arg` is a string and returns this string.\n\nThis function uses `lua_tolstring` to get its result, so all conversions and caveats of that function apply here.\n\n--------------------------------------------------------------------------------\n\n`luaL_checktype`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_checktype (lua_State *L, int arg, int t);\n~~~\n\nChecks whether the function argument `arg` has type `t`. See `lua_type` for the encoding of types for `t`.\n\n--------------------------------------------------------------------------------\n\n`luaL_checkudata`\n\n[-0, +0, v]\n\n~~~\nvoid *luaL_checkudata (lua_State *L, int arg, const char *tname);\n~~~\n\nChecks whether the function argument `arg` is a userdata of the type `tname` (see `luaL_newmetatable`) and returns the userdata's memory-block address (see `lua_touserdata`).\n\n--------------------------------------------------------------------------------\n\n`luaL_checkversion`\n\n[-0, +0, v]\n\n~~~\nvoid luaL_checkversion (lua_State *L);\n~~~\n\nChecks whether the code making the call and the Lua library being called are using the same version of Lua and the same numeric types.\n\n--------------------------------------------------------------------------------\n\n`luaL_dofile`\n\n[-0, +?, m]\n\n~~~\nint luaL_dofile (lua_State *L, const char *filename);\n~~~\n\nLoads and runs the given file. It is defined as the following macro:\n\n~~~\n\n (luaL_loadfile(L, filename) || lua_pcall(L, 0, LUA_MULTRET, 0))\n\n~~~\n\nIt returns `LUA_OK` if there are no errors, or an error code in case of errors (see §4.4.1).\n\n--------------------------------------------------------------------------------\n\n`luaL_dostring`\n\n[-0, +?, –]\n\n~~~\nint luaL_dostring (lua_State *L, const char *str);\n~~~\n\nLoads and runs the given string. It is defined as the following macro:\n\n~~~\n\n (luaL_loadstring(L, str) || lua_pcall(L, 0, LUA_MULTRET, 0))\n\n~~~\n\nIt returns `LUA_OK` if there are no errors, or an error code in case of errors (see §4.4.1).\n\n--------------------------------------------------------------------------------\n\n`luaL_error`\n\n[-0, +0, v]\n\n~~~\nint luaL_error (lua_State *L, const char *fmt, ...);\n~~~\n\nRaises an error. The error message format is given by `fmt` plus any extra arguments, following the same rules of `lua_pushfstring`. It also adds at the beginning of the message the file name and the line number where the error occurred, if this information is available.\n\nThis function never returns, but it is an idiom to use it in C functions as `return luaL_error(args)`.\n\n--------------------------------------------------------------------------------\n\n`luaL_execresult`\n\n[-0, +3, m]\n\n~~~\nint luaL_execresult (lua_State *L, int stat);\n~~~\n\nThis function produces the return values for process-related functions in the standard library (`os.execute` and `io.close`).\n\n--------------------------------------------------------------------------------\n\n`luaL_fileresult`\n\n[-0, +(1|3), m]\n\n~~~\nint luaL_fileresult (lua_State *L, int stat, const char *fname);\n~~~\n\nThis function produces the return values for file-related functions in the standard library (`io.open`, `os.rename`, `file:seek`, etc.).\n\n--------------------------------------------------------------------------------\n\n`luaL_getmetafield`\n\n[-0, +(0|1), m]\n\n~~~\nint luaL_getmetafield (lua_State *L, int obj, const char *e);\n~~~\n\nPushes onto the stack the field `e` from the metatable of the object at index `obj` and returns the type of the pushed value. If the object does not have a metatable, or if the metatable does not have this field, pushes nothing and returns `LUA_TNIL`.\n\n--------------------------------------------------------------------------------\n\n`luaL_getmetatable`\n\n[-0, +1, m]\n\n~~~\nint luaL_getmetatable (lua_State *L, const char *tname);\n~~~\n\nPushes onto the stack the metatable associated with the name `tname` in the registry (see `luaL_newmetatable`), or nil if there is no metatable associated with that name. Returns the type of the pushed value.\n\n--------------------------------------------------------------------------------\n\n`luaL_getsubtable`\n\n[-0, +1, e]\n\n~~~\nint luaL_getsubtable (lua_State *L, int idx, const char *fname);\n~~~\n\nEnsures that the value `t[fname]`, where `t` is the value at index `idx`, is a table, and pushes that table onto the stack. Returns true if it finds a previous table there and false if it creates a new table.\n\n--------------------------------------------------------------------------------\n\n`luaL_gsub`\n\n[-0, +1, m]\n\n~~~\nconst char *luaL_gsub (lua_State *L,\n const char *s,\n const char *p,\n const char *r);\n~~~\n\nCreates a copy of string `s`, replacing any occurrence of the string `p` with the string `r`. Pushes the resulting string on the stack and returns it.\n\n--------------------------------------------------------------------------------\n\n`luaL_len`\n\n[-0, +0, e]\n\n~~~\nlua_Integer luaL_len (lua_State *L, int index);\n~~~\n\nReturns the \"length\" of the value at the given index as a number; it is equivalent to the '`#`' operator in Lua (see §3.4.7). Raises an error if the result of the operation is not an integer. (This case can only happen through metamethods.)\n\n--------------------------------------------------------------------------------\n\n`luaL_loadbuffer`\n\n[-0, +1, –]\n\n~~~\nint luaL_loadbuffer (lua_State *L,\n const char *buff,\n size_t sz,\n const char *name);\n~~~\n\nEquivalent to `luaL_loadbufferx` with `mode` equal to `NULL`.\n\n--------------------------------------------------------------------------------\n\n`luaL_loadbufferx`\n\n[-0, +1, –]\n\n~~~\nint luaL_loadbufferx (lua_State *L,\n const char *buff,\n size_t sz,\n const char *name,\n const char *mode);\n~~~\n\nLoads a buffer as a Lua chunk. This function uses `lua_load` to load the chunk in the buffer pointed to by `buff` with size `sz`.\n\nThis function returns the same results as `lua_load`. `name` is the chunk name, used for debug information and error messages. The string `mode` works as in the function `lua_load`.\n\n--------------------------------------------------------------------------------\n\n`luaL_loadfile`\n\n[-0, +1, m]\n\n~~~\nint luaL_loadfile (lua_State *L, const char *filename);\n~~~\n\nEquivalent to `luaL_loadfilex` with `mode` equal to `NULL`.\n\n--------------------------------------------------------------------------------\n\n`luaL_loadfilex`\n\n[-0, +1, m]\n\n~~~\nint luaL_loadfilex (lua_State *L, const char *filename,\n const char *mode);\n~~~\n\nLoads a file as a Lua chunk. This function uses `lua_load` to load the chunk in the file named `filename`. If `filename` is `NULL`, then it loads from the standard input. The first line in the file is ignored if it starts with a `#`.\n\nThe string `mode` works as in the function `lua_load`.\n\nThis function returns the same results as `lua_load` or `LUA_ERRFILE` for file-related errors.\n\nAs `lua_load`, this function only loads the chunk; it does not run it.\n\n--------------------------------------------------------------------------------\n\n`luaL_loadstring`\n\n[-0, +1, –]\n\n~~~\nint luaL_loadstring (lua_State *L, const char *s);\n~~~\n\nLoads a string as a Lua chunk. This function uses `lua_load` to load the chunk in the zero-terminated string `s`.\n\nThis function returns the same results as `lua_load`.\n\nAlso as `lua_load`, this function only loads the chunk; it does not run it.\n\n--------------------------------------------------------------------------------\n\n`luaL_newlib`\n\n[-0, +1, m]\n\n~~~\nvoid luaL_newlib (lua_State *L, const luaL_Reg l[]);\n~~~\n\nCreates a new table and registers there the functions in the list `l`.\n\nIt is implemented as the following macro:\n\n~~~\n\n (luaL_newlibtable(L,l), luaL_setfuncs(L,l,0))\n\n~~~\n\nThe array `l` must be the actual array, not a pointer to it.\n\n--------------------------------------------------------------------------------\n\n`luaL_newlibtable`\n\n[-0, +1, m]\n\n~~~\nvoid luaL_newlibtable (lua_State *L, const luaL_Reg l[]);\n~~~\n\nCreates a new table with a size optimized to store all entries in the array `l` (but does not actually store them). It is intended to be used in conjunction with `luaL_setfuncs` (see `luaL_newlib`).\n\nIt is implemented as a macro. The array `l` must be the actual array, not a pointer to it.\n\n--------------------------------------------------------------------------------\n\n`luaL_newmetatable`\n\n[-0, +1, m]\n\n~~~\nint luaL_newmetatable (lua_State *L, const char *tname);\n~~~\n\nIf the registry already has the key `tname`, returns 0. Otherwise, creates a new table to be used as a metatable for userdata, adds to this new table the pair `__name = tname`, adds to the registry the pair `[tname] = new table`, and returns 1.\n\nIn both cases, the function pushes onto the stack the final value associated with `tname` in the registry.\n\n--------------------------------------------------------------------------------\n\n`luaL_newstate`\n\n[-0, +0, –]\n\n~~~\nlua_State *luaL_newstate (void);\n~~~\n\nCreates a new Lua state. It calls `lua_newstate` with an allocator based on the standard C allocation functions and then sets a warning function and a panic function (see §4.4) that print messages to the standard error output.\n\nReturns the new state, or `NULL` if there is a memory allocation error.\n\n--------------------------------------------------------------------------------\n\n`luaL_openlibs`\n\n[-0, +0, e]\n\n~~~\nvoid luaL_openlibs (lua_State *L);\n~~~\n\nOpens all standard Lua libraries into the given state.\n\n--------------------------------------------------------------------------------\n\n`luaL_opt`\n\n[-0, +0, –]\n\n~~~\nT luaL_opt (L, func, arg, dflt);\n~~~\n\nThis macro is defined as follows:\n\n~~~\n\n (lua_isnoneornil(L,(arg)) ? (dflt) : func(L,(arg)))\n\n~~~\n\nIn words, if the argument `arg` is nil or absent, the macro results in the default `dflt`. Otherwise, it results in the result of calling `func` with the state `L` and the argument index `arg` as arguments. Note that it evaluates the expression `dflt` only if needed.\n\n--------------------------------------------------------------------------------\n\n`luaL_optinteger`\n\n[-0, +0, v]\n\n~~~\nlua_Integer luaL_optinteger (lua_State *L,\n int arg,\n lua_Integer d);\n~~~\n\nIf the function argument `arg` is an integer (or it is convertible to an integer), returns this integer. If this argument is absent or is nil, returns `d`. Otherwise, raises an error.\n\n--------------------------------------------------------------------------------\n\n`luaL_optlstring`\n\n[-0, +0, v]\n\n~~~\nconst char *luaL_optlstring (lua_State *L,\n int arg,\n const char *d,\n size_t *l);\n~~~\n\nIf the function argument `arg` is a string, returns this string. If this argument is absent or is nil, returns `d`. Otherwise, raises an error.\n\nIf `l` is not `NULL`, fills its referent with the result's length. If the result is `NULL` (only possible when returning `d` and `d == NULL`), its length is considered zero.\n\nThis function uses `lua_tolstring` to get its result, so all conversions and caveats of that function apply here.\n\n--------------------------------------------------------------------------------\n\n`luaL_optnumber`\n\n[-0, +0, v]\n\n~~~\nlua_Number luaL_optnumber (lua_State *L, int arg, lua_Number d);\n~~~\n\nIf the function argument `arg` is a number, returns this number as a `lua_Number`. If this argument is absent or is nil, returns `d`. Otherwise, raises an error.\n\n--------------------------------------------------------------------------------\n\n`luaL_optstring`\n\n[-0, +0, v]\n\n~~~\nconst char *luaL_optstring (lua_State *L,\n int arg,\n const char *d);\n~~~\n\nIf the function argument `arg` is a string, returns this string. If this argument is absent or is nil, returns `d`. Otherwise, raises an error.\n\n--------------------------------------------------------------------------------\n\n`luaL_prepbuffer`\n\n[-?, +?, m]\n\n~~~\nchar *luaL_prepbuffer (luaL_Buffer *B);\n~~~\n\nEquivalent to `luaL_prepbuffsize` with the predefined size `LUAL_BUFFERSIZE`.\n\n--------------------------------------------------------------------------------\n\n`luaL_prepbuffsize`\n\n[-?, +?, m]\n\n~~~\nchar *luaL_prepbuffsize (luaL_Buffer *B, size_t sz);\n~~~\n\nReturns an address to a space of size `sz` where you can copy a string to be added to buffer `B` (see `luaL_Buffer`). After copying the string into this space you must call `luaL_addsize` with the size of the string to actually add it to the buffer.\n\n--------------------------------------------------------------------------------\n\n`luaL_pushfail`\n\n[-0, +1, –]\n\n~~~\nvoid luaL_pushfail (lua_State *L);\n~~~\n\nPushes the fail value onto the stack (see §6).\n\n--------------------------------------------------------------------------------\n\n`luaL_pushresult`\n\n[-?, +1, m]\n\n~~~\nvoid luaL_pushresult (luaL_Buffer *B);\n~~~\n\nFinishes the use of buffer `B` leaving the final string on the top of the stack.\n\n--------------------------------------------------------------------------------\n\n`luaL_pushresultsize`\n\n[-?, +1, m]\n\n~~~\nvoid luaL_pushresultsize (luaL_Buffer *B, size_t sz);\n~~~\n\nEquivalent to the sequence `luaL_addsize`, `luaL_pushresult`.\n\n--------------------------------------------------------------------------------\n\n`luaL_ref`\n\n[-1, +0, m]\n\n~~~\nint luaL_ref (lua_State *L, int t);\n~~~\n\nCreates and returns a reference, in the table at index `t`, for the object on the top of the stack (and pops the object).\n\nA reference is a unique integer key. As long as you do not manually add integer keys into the table `t`, `luaL_ref` ensures the uniqueness of the key it returns. You can retrieve an object referred by the reference `r` by calling `lua_rawgeti(L, t, r)`. The function `luaL_unref` frees a reference.\n\nIf the object on the top of the stack is nil, `luaL_ref` returns the constant `LUA_REFNIL`. The constant `LUA_NOREF` is guaranteed to be different from any reference returned by `luaL_ref`.\n\n--------------------------------------------------------------------------------\n\n`luaL_Reg`\n\n~~~\ntypedef struct luaL_Reg {\n const char *name;\n lua_CFunction func; } luaL_Reg;\n~~~\n\nType for arrays of functions to be registered by `luaL_setfuncs`. `name` is the function name and `func` is a pointer to the function. Any array of `luaL_Reg` must end with a sentinel entry in which both `name` and `func` are `NULL`.\n\n--------------------------------------------------------------------------------\n\n`luaL_requiref`\n\n[-0, +1, e]\n\n~~~\nvoid luaL_requiref (lua_State *L, const char *modname,\n lua_CFunction openf, int glb);\n~~~\n\nIf `package.loaded[modname]` is not true, calls the function `openf` with the string `modname` as an argument and sets the call result to `package.loaded[modname]`, as if that function has been called through `require`.\n\nIf `glb` is true, also stores the module into the global `modname`.\n\nLeaves a copy of the module on the stack.\n\n--------------------------------------------------------------------------------\n\n`luaL_setfuncs`\n\n[-nup, +0, m]\n\n~~~\nvoid luaL_setfuncs (lua_State *L, const luaL_Reg *l, int nup);\n~~~\n\nRegisters all functions in the array `l` (see `luaL_Reg`) into the table on the top of the stack (below optional upvalues, see next).\n\nWhen `nup` is not zero, all functions are created with `nup` upvalues, initialized with copies of the `nup` values previously pushed on the stack on top of the library table. These values are popped from the stack after the registration.\n\n--------------------------------------------------------------------------------\n\n`luaL_setmetatable`\n\n[-0, +0, –]\n\n~~~\nvoid luaL_setmetatable (lua_State *L, const char *tname);\n~~~\n\nSets the metatable of the object on the top of the stack as the metatable associated with name `tname` in the registry (see `luaL_newmetatable`).\n\n--------------------------------------------------------------------------------\n\n`luaL_Stream`\n\n~~~\ntypedef struct luaL_Stream {\n FILE *f;\n lua_CFunction closef; } luaL_Stream;\n~~~\n\nThe standard representation for file handles used by the standard I\/O library.\n\nA file handle is implemented as a full userdata, with a metatable called `LUA_FILEHANDLE` (where `LUA_FILEHANDLE` is a macro with the actual metatable's name). The metatable is created by the I\/O library (see `luaL_newmetatable`).\n\nThis userdata must start with the structure `luaL_Stream`; it can contain other data after this initial structure. The field `f` points to the corresponding C stream (or it can be `NULL` to indicate an incompletely created handle). The field `closef` points to a Lua function that will be called to close the stream when the handle is closed or collected; this function receives the file handle as its sole argument and must return either a true value, in case of success, or a false value plus an error message, in case of error. Once Lua calls this field, it changes the field value to `NULL` to signal that the handle is closed.\n\n--------------------------------------------------------------------------------\n\n`luaL_testudata`\n\n[-0, +0, m]\n\n~~~\nvoid *luaL_testudata (lua_State *L, int arg, const char *tname);\n~~~\n\nThis function works like `luaL_checkudata`, except that, when the test fails, it returns `NULL` instead of raising an error.\n\n--------------------------------------------------------------------------------\n\n`luaL_tolstring`\n\n[-0, +1, e]\n\n~~~\nconst char *luaL_tolstring (lua_State *L, int idx, size_t *len);\n~~~\n\nConverts any Lua value at the given index to a C string in a reasonable format. The resulting string is pushed onto the stack and also returned by the function. If `len` is not `NULL`, the function also sets `*len` with the string length.\n\nIf the value has a metatable with a `__tostring` field, then `luaL_tolstring` calls the corresponding metamethod with the value as argument, and uses the result of the call as its result.\n\n--------------------------------------------------------------------------------\n\n`luaL_traceback`\n\n[-0, +1, m]\n\n~~~\nvoid luaL_traceback (lua_State *L, lua_State *L1, const char *msg,\n int level);\n~~~\n\nCreates and pushes a traceback of the stack `L1`. If `msg` is not `NULL`, it is appended at the beginning of the traceback. The `level` parameter tells at which level to start the traceback.\n\n--------------------------------------------------------------------------------\n\n`luaL_typeerror`\n\n[-0, +0, v]\n\n~~~\nconst char *luaL_typeerror (lua_State *L,\n int arg,\n const char *tname);\n~~~\n\nRaises a type error for the argument `arg` of the C function that called it, using a standard message; `tname` is a \"name\" for the expected type. This function never returns.\n\n--------------------------------------------------------------------------------\n\n`luaL_typename`\n\n[-0, +0, –]\n\n~~~\nconst char *luaL_typename (lua_State *L, int index);\n~~~\n\nReturns the name of the type of the value at the given index.\n\n--------------------------------------------------------------------------------\n\n`luaL_unref`\n\n[-0, +0, –]\n\n~~~\nvoid luaL_unref (lua_State *L, int t, int ref);\n~~~\n\nReleases the reference `ref` from the table at index `t` (see `luaL_ref`). The entry is removed from the table, so that the referred object can be collected. The reference `ref` is also freed to be used again.\n\nIf `ref` is `LUA_NOREF` or `LUA_REFNIL`, `luaL_unref` does nothing.\n\n--------------------------------------------------------------------------------\n\n`luaL_where`\n\n[-0, +1, m]\n\n~~~\nvoid luaL_where (lua_State *L, int lvl);\n~~~\n\nPushes onto the stack a string identifying the current position of the control at level `lvl` in the call stack. Typically this string has the following format:\n\n~~~\n\n chunkname:currentline:\n\n~~~\n\nLevel 0 is the running function, level 1 is the function that called the running function, etc.\n\nThis function is used to build a prefix for error messages.","name":"_5_1","type":"manual","def":"5.1 – Functions and Types"},{"doc":"4.1 – The Stack\n\nLua uses a virtual stack to pass values to and from C. Each element in this stack represents a Lua value (nil, number, string, etc.). Functions in the API can access this stack through the Lua state parameter that they receive.\n\nWhenever Lua calls C, the called function gets a new stack, which is independent of previous stacks and of stacks of C functions that are still active. This stack initially contains any arguments to the C function and it is where the C function can store temporary Lua values and must push its results to be returned to the caller (see `lua_CFunction`).\n\nFor convenience, most query operations in the API do not follow a strict stack discipline. Instead, they can refer to any element in the stack by using an index: A positive index represents an absolute stack position, starting at 1 as the bottom of the stack; a negative index represents an offset relative to the top of the stack. More specifically, if the stack has n elements, then index 1 represents the first element (that is, the element that was pushed onto the stack first) and index n represents the last element; index -1 also represents the last element (that is, the element at the top) and index -n represents the first element.","name":"_4_1","type":"manual","def":"4.1 – The Stack"},{"doc":"3.1 – Lexical Conventions\n\nLua is a free-form language. It ignores spaces and comments between lexical elements (tokens), except as delimiters between two tokens. In source code, Lua recognizes as spaces the standard ASCII whitespace characters space, form feed, newline, carriage return, horizontal tab, and vertical tab.\n\nNames (also called identifiers) in Lua can be any string of Latin letters, Arabic-Indic digits, and underscores, not beginning with a digit and not being a reserved word. Identifiers are used to name variables, table fields, and labels.\n\nThe following keywords are reserved and cannot be used as names:\n\n~~~\n\n and break do else elseif end\n false for function goto if in\n local nil not or repeat return\n then true until while\n\n~~~\n\nLua is a case-sensitive language: `and` is a reserved word, but `And` and `AND` are two different, valid names. As a convention, programs should avoid creating names that start with an underscore followed by one or more uppercase letters (such as `_VERSION`).\n\nThe following strings denote other tokens:\n\n~~~\n\n + - * \/ % ^ #\n & ~ | << >> \/\/\n == ~= <= >= < > =\n ( ) { } [ ] ::\n ; : , . .. ...\n\n~~~\n\nA short literal string can be delimited by matching single or double quotes, and can contain the following C-like escape sequences: '`\\a`' (bell), '`\\b`' (backspace), '`\\f`' (form feed), '`\\n`' (newline), '`\\r`' (carriage return), '`\\t`' (horizontal tab), '`\\v`' (vertical tab), '`\\\\`' (backslash), '`\\\"`' (quotation mark [double quote]), and '`\\'`' (apostrophe [single quote]). A backslash followed by a line break results in a newline in the string. The escape sequence '`\\z`' skips the following span of whitespace characters, including line breaks; it is particularly useful to break and indent a long literal string into multiple lines without adding the newlines and spaces into the string contents. A short literal string cannot contain unescaped line breaks nor escapes not forming a valid escape sequence.\n\nWe can specify any byte in a short literal string, including embedded zeros, by its numeric value. This can be done with the escape sequence `\\xXX`, where XX is a sequence of exactly two hexadecimal digits, or with the escape sequence `\\ddd`, where ddd is a sequence of up to three decimal digits. (Note that if a decimal escape sequence is to be followed by a digit, it must be expressed using exactly three digits.)\n\nThe UTF-8 encoding of a Unicode character can be inserted in a literal string with the escape sequence `\\u{XXX}` (with mandatory enclosing braces), where XXX is a sequence of one or more hexadecimal digits representing the character code point. This code point can be any value less than 231. (Lua uses the original UTF-8 specification here, which is not restricted to valid Unicode code points.)\n\nLiteral strings can also be defined using a long format enclosed by long brackets. We define an opening long bracket of level n as an opening square bracket followed by n equal signs followed by another opening square bracket. So, an opening long bracket of level 0 is written as `[[`, an opening long bracket of level 1 is written as `[=[`, and so on. A closing long bracket is defined similarly; for instance, a closing long bracket of level 4 is written as `]====]`. A long literal starts with an opening long bracket of any level and ends at the first closing long bracket of the same level. It can contain any text except a closing bracket of the same level. Literals in this bracketed form can run for several lines, do not interpret any escape sequences, and ignore long brackets of any other level. Any kind of end-of-line sequence (carriage return, newline, carriage return followed by newline, or newline followed by carriage return) is converted to a simple newline. When the opening long bracket is immediately followed by a newline, the newline is not included in the string.\n\nAs an example, in a system using ASCII (in which '`a`' is coded as 97, newline is coded as 10, and '`1`' is coded as 49), the five literal strings below denote the same string:\n\n~~~\n\n a = 'alo\\n123\"'\n a = \"alo\\n123\\\"\"\n a = '\\97lo\\10\\04923\"'\n a = [[alo\n 123\"]]\n a = [==[\n alo\n 123\"]==]\n\n~~~\n\nAny byte in a literal string not explicitly affected by the previous rules represents itself. However, Lua opens files for parsing in text mode, and the system's file functions may have problems with some control characters. So, it is safer to represent binary data as a quoted literal with explicit escape sequences for the non-text characters.\n\nA numeric constant (or numeral) can be written with an optional fractional part and an optional decimal exponent, marked by a letter '`e`' or '`E`'. Lua also accepts hexadecimal constants, which start with `0x` or `0X`. Hexadecimal constants also accept an optional fractional part plus an optional binary exponent, marked by a letter '`p`' or '`P`'.\n\nA numeric constant with a radix point or an exponent denotes a float; otherwise, if its value fits in an integer or it is a hexadecimal constant, it denotes an integer; otherwise (that is, a decimal integer numeral that overflows), it denotes a float. Hexadecimal numerals with neither a radix point nor an exponent always denote an integer value; if the value overflows, it wraps around to fit into a valid integer.\n\nExamples of valid integer constants are\n\n~~~\n\n 3 345 0xff 0xBEBADA\n\n~~~\n\nExamples of valid float constants are\n\n~~~\n\n 3.0 3.1416 314.16e-2 0.31416E1 34e1\n 0x0.1E 0xA23p-4 0X1.921FB54442D18P+1\n\n~~~\n\nA comment starts with a double hyphen (`--`) anywhere outside a string. If the text immediately after `--` is not an opening long bracket, the comment is a short comment, which runs until the end of the line. Otherwise, it is a long comment, which runs until the corresponding closing long bracket.","name":"_3_1","type":"manual","def":"3.1 – Lexical Conventions"},{"doc":"2.1 – Values and Types\n\nLua is a dynamically typed language. This means that variables do not have types; only values do. There are no type definitions in the language. All values carry their own type.\n\nAll values in Lua are first-class values. This means that all values can be stored in variables, passed as arguments to other functions, and returned as results.\n\nThere are eight basic types in Lua: nil, boolean, number, string, function, userdata, thread, and table. The type nil has one single value, nil, whose main property is to be different from any other value; it often represents the absence of a useful value. The type boolean has two values, false and true. Both nil and false make a condition false; they are collectively called false values. Any other value makes a condition true.\n\nThe type number represents both integer numbers and real (floating-point) numbers, using two subtypes: integer and float. Standard Lua uses 64-bit integers and double-precision (64-bit) floats, but you can also compile Lua so that it uses 32-bit integers and\/or single-precision (32-bit) floats. The option with 32 bits for both integers and floats is particularly attractive for small machines and embedded systems. (See macro `LUA_32BITS` in file `luaconf.h`.)\n\nUnless stated otherwise, any overflow when manipulating integer values wrap around, according to the usual rules of two-complement arithmetic. (In other words, the actual result is the unique representable integer that is equal modulo 2n to the mathematical result, where n is the number of bits of the integer type.)\n\nLua has explicit rules about when each subtype is used, but it also converts between them automatically as needed (see §3.4.3). Therefore, the programmer may choose to mostly ignore the difference between integers and floats or to assume complete control over the representation of each number.\n\nThe type string represents immutable sequences of bytes.\n\nLua is 8-bit clean: strings can contain any 8-bit value, including embedded zeros ('`\\0`'). Lua is also encoding-agnostic; it makes no assumptions about the contents of a string. The length of any string in Lua must fit in a Lua integer.\n\nLua can call (and manipulate) functions written in Lua and functions written in C (see §3.4.10). Both are represented by the type function.\n\nThe type userdata is provided to allow arbitrary C data to be stored in Lua variables. A userdata value represents a block of raw memory. There are two kinds of userdata: full userdata, which is an object with a block of memory managed by Lua, and light userdata, which is simply a C pointer value. Userdata has no predefined operations in Lua, except assignment and identity test. By using metatables, the programmer can define operations for full userdata values (see §2.4). Userdata values cannot be created or modified in Lua, only through the C API. This guarantees the integrity of data owned by the host program and C libraries.\n\nThe type thread represents independent threads of execution and it is used to implement coroutines (see §2.6). Lua threads are not related to operating-system threads. Lua supports coroutines on all systems, even those that do not support threads natively.\n\nThe type table implements associative arrays, that is, arrays that can have as indices not only numbers, but any Lua value except nil and NaN. (Not a Number is a special floating-point value used by the IEEE 754 standard to represent undefined numerical results, such as `0\/0`.) Tables can be heterogeneous; that is, they can contain values of all types (except nil). Any key associated to the value nil is not considered part of the table. Conversely, any key that is not part of a table has an associated value nil.\n\nTables are the sole data-structuring mechanism in Lua; they can be used to represent ordinary arrays, lists, symbol tables, sets, records, graphs, trees, etc. To represent records, Lua uses the field name as an index. The language supports this representation by providing `a.name` as syntactic sugar for `a[\"name\"]`. There are several convenient ways to create tables in Lua (see §3.4.9).\n\nLike indices, the values of table fields can be of any type. In particular, because functions are first-class values, table fields can contain functions. Thus tables can also carry methods (see §3.4.11).\n\nThe indexing of tables follows the definition of raw equality in the language. The expressions `a[i]` and `a[j]` denote the same table element if and only if `i` and `j` are raw equal (that is, equal without metamethods). In particular, floats with integral values are equal to their respective integers (e.g., `1.0 == 1`). To avoid ambiguities, any float used as a key that is equal to an integer is converted to that integer. For instance, if you write `a[2.0] = true`, the actual key inserted into the table will be the integer `2`.\n\nTables, functions, threads, and (full) userdata values are objects: variables do not actually contain these values, only references to them. Assignment, parameter passing, and function returns always manipulate references to such values; these operations do not imply any kind of copy.\n\nThe library function `type` returns a string describing the type of a given value (see `type`).","name":"_2_1","type":"manual","def":"2.1 – Values and Types"},{"doc":"6.2 – Coroutine Manipulation\n\nThis library comprises the operations to manipulate coroutines, which come inside the table `coroutine`. See §2.6 for a general description of coroutines.\n\n--------------------------------------------------------------------------------\n\n`coroutine.close (co)`\n\nCloses coroutine `co`, that is, closes all its pending to-be-closed variables and puts the coroutine in a dead state. The given coroutine must be dead or suspended. In case of error closing some variable, returns false plus the error object; otherwise returns true.\n\n--------------------------------------------------------------------------------\n\n`coroutine.create (f)`\n\nCreates a new coroutine, with body `f`. `f` must be a function. Returns this new coroutine, an object with type `\"thread\"`.\n\n--------------------------------------------------------------------------------\n\n`coroutine.isyieldable ([co])`\n\nReturns true when the coroutine `co` can yield. The default for `co` is the running coroutine.\n\nA coroutine is yieldable if it is not the main thread and it is not inside a non-yieldable C function.\n\n--------------------------------------------------------------------------------\n\n`coroutine.resume (co [, val1, ···])`\n\nStarts or continues the execution of coroutine `co`. The first time you resume a coroutine, it starts running its body. The values `val1`, ... are passed as the arguments to the body function. If the coroutine has yielded, `resume` restarts it; the values `val1`, ... are passed as the results from the yield.\n\nIf the coroutine runs without any errors, `resume` returns true plus any values passed to `yield` (when the coroutine yields) or any values returned by the body function (when the coroutine terminates). If there is any error, `resume` returns false plus the error message.\n\n--------------------------------------------------------------------------------\n\n`coroutine.running ()`\n\nReturns the running coroutine plus a boolean, true when the running coroutine is the main one.\n\n--------------------------------------------------------------------------------\n\n`coroutine.status (co)`\n\nReturns the status of the coroutine `co`, as a string: `\"running\"`, if the coroutine is running (that is, it is the one that called `status`); `\"suspended\"`, if the coroutine is suspended in a call to `yield`, or if it has not started running yet; `\"normal\"` if the coroutine is active but not running (that is, it has resumed another coroutine); and `\"dead\"` if the coroutine has finished its body function, or if it has stopped with an error.\n\n--------------------------------------------------------------------------------\n\n`coroutine.wrap (f)`\n\nCreates a new coroutine, with body `f`; `f` must be a function. Returns a function that resumes the coroutine each time it is called. Any arguments passed to this function behave as the extra arguments to `resume`. The function returns the same values returned by `resume`, except the first boolean. In case of error, the function closes the coroutine and propagates the error.\n\n--------------------------------------------------------------------------------\n\n`coroutine.yield (···)`\n\nSuspends the execution of the calling coroutine. Any arguments to `yield` are passed as extra results to `resume`.","name":"_6_2","type":"manual","def":"6.2 – Coroutine Manipulation"},{"doc":"3.3.6 – Function Calls as Statements\n\nTo allow possible side-effects, function calls can be executed as statements:\n\n~~~\n\n\tstat ::= functioncall\n\n~~~\n\nIn this case, all returned values are thrown away. Function calls are explained in §3.4.10.","name":"_3_3_6","type":"manual","def":"3.3.6 – Function Calls as Statements"},{"doc":"1 – Introduction\n\nLua is a powerful, efficient, lightweight, embeddable scripting language. It supports procedural programming, object-oriented programming, functional programming, data-driven programming, and data description.\n\nLua combines simple procedural syntax with powerful data description constructs based on associative arrays and extensible semantics. Lua is dynamically typed, runs by interpreting bytecode with a register-based virtual machine, and has automatic memory management with a generational garbage collection, making it ideal for configuration, scripting, and rapid prototyping.\n\nLua is implemented as a library, written in clean C, the common subset of Standard C and C++. The Lua distribution includes a host program called `lua`, which uses the Lua library to offer a complete, standalone Lua interpreter, for interactive or batch use. Lua is intended to be used both as a powerful, lightweight, embeddable scripting language for any program that needs one, and as a powerful but lightweight and efficient stand-alone language.\n\nAs an extension language, Lua has no notion of a \"main\" program: it works embedded in a host client, called the embedding program or simply the host. (Frequently, this host is the stand-alone `lua` program.) The host program can invoke functions to execute a piece of Lua code, can write and read Lua variables, and can register C functions to be called by Lua code. Through the use of C functions, Lua can be augmented to cope with a wide range of different domains, thus creating customized programming languages sharing a syntactical framework.\n\nLua is free software, and is provided as usual with no guarantees, as stated in its license. The implementation described in this manual is available at Lua's official web site, `www.lua.org`.\n\nLike any other reference manual, this document is dry in places. For a discussion of the decisions behind the design of Lua, see the technical papers available at Lua's web site. For a detailed introduction to programming in Lua, see Roberto's book, Programming in Lua.","name":"_1","type":"manual","def":"1 – Introduction"},{"doc":"3.3.5 – For Statement\n\nThe for statement has two forms: one numerical and one generic.\n\nThe numerical for loop\n\nThe numerical for loop repeats a block of code while a control variable goes through an arithmetic progression. It has the following syntax:\n\n~~~\n\n\tstat ::= for Name ‘=’ exp ‘,’ exp [‘,’ exp] do block end\n\n~~~\n\nThe given identifier (Name) defines the control variable, which is a new variable local to the loop body (block).\n\nThe loop starts by evaluating once the three control expressions. Their values are called respectively the initial value, the limit, and the step. If the step is absent, it defaults to 1.\n\nIf both the initial value and the step are integers, the loop is done with integers; note that the limit may not be an integer. Otherwise, the three values are converted to floats and the loop is done with floats. Beware of floating-point accuracy in this case.\n\nAfter that initialization, the loop body is repeated with the value of the control variable going through an arithmetic progression, starting at the initial value, with a common difference given by the step. A negative step makes a decreasing sequence; a step equal to zero raises an error. The loop continues while the value is less than or equal to the limit (greater than or equal to for a negative step). If the initial value is already greater than the limit (or less than, if the step is negative), the body is not executed.\n\nFor integer loops, the control variable never wraps around; instead, the loop ends in case of an overflow.\n\nYou should not change the value of the control variable during the loop. If you need its value after the loop, assign it to another variable before exiting the loop.\n\nThe generic for loop\n\nThe generic for statement works over functions, called iterators. On each iteration, the iterator function is called to produce a new value, stopping when this new value is nil. The generic for loop has the following syntax:\n\n~~~\n\n\tstat ::= for namelist in explist do block end\n\tnamelist ::= Name {‘,’ Name}\n\n~~~\n\nA for statement like\n\n~~~\n\n for var_1, ···, var_n in explist do body end\n\n~~~\n\nworks as follows.\n\nThe names var_i declare loop variables local to the loop body. The first of these variables is the control variable.\n\nThe loop starts by evaluating explist to produce four values: an iterator function, a state, an initial value for the control variable, and a closing value.\n\nThen, at each iteration, Lua calls the iterator function with two arguments: the state and the control variable. The results from this call are then assigned to the loop variables, following the rules of multiple assignments (see §3.3.3). If the control variable becomes nil, the loop terminates. Otherwise, the body is executed and the loop goes to the next iteration.\n\nThe closing value behaves like a to-be-closed variable (see §3.3.8), which can be used to release resources when the loop ends. Otherwise, it does not interfere with the loop.\n\nYou should not change the value of the control variable during the loop.","name":"_3_3_5","type":"manual","def":"3.3.5 – For Statement"},{"doc":"4 – The Application Program Interface\n\nThis section describes the C API for Lua, that is, the set of C functions available to the host program to communicate with Lua. All API functions and related types and constants are declared in the header file `lua.h`.\n\nEven when we use the term \"function\", any facility in the API may be provided as a macro instead. Except where stated otherwise, all such macros use each of their arguments exactly once (except for the first argument, which is always a Lua state), and so do not generate any hidden side-effects.\n\nAs in most C libraries, the Lua API functions do not check their arguments for validity or consistency. However, you can change this behavior by compiling Lua with the macro `LUA_USE_APICHECK` defined.\n\nThe Lua library is fully reentrant: it has no global variables. It keeps all information it needs in a dynamic structure, called the Lua state.\n\nEach Lua state has one or more threads, which correspond to independent, cooperative lines of execution. The type `lua_State` (despite its name) refers to a thread. (Indirectly, through the thread, it also refers to the Lua state associated to the thread.)\n\nA pointer to a thread must be passed as the first argument to every function in the library, except to `lua_newstate`, which creates a Lua state from scratch and returns a pointer to the main thread in the new state.","name":"_4","type":"manual","def":"4 – The Application Program Interface"},{"doc":"6.6 – Table Manipulation\n\nThis library provides generic functions for table manipulation. It provides all its functions inside the table `table`.\n\nRemember that, whenever an operation needs the length of a table, all caveats about the length operator apply (see §3.4.7). All functions ignore non-numeric keys in the tables given as arguments.\n\n--------------------------------------------------------------------------------\n\n`table.concat (list [, sep [, i [, j]]])`\n\nGiven a list where all elements are strings or numbers, returns the string `list[i]..sep..list[i+1] ··· sep..list[j]`. The default value for `sep` is the empty string, the default for `i` is 1, and the default for `j` is `#list`. If `i` is greater than `j`, returns the empty string.\n\n--------------------------------------------------------------------------------\n\n`table.insert (list, [pos,] value)`\n\nInserts element `value` at position `pos` in `list`, shifting up the elements `list[pos], list[pos+1], ···, list[#list]`. The default value for `pos` is `#list+1`, so that a call `table.insert(t,x)` inserts `x` at the end of the list `t`.\n\n--------------------------------------------------------------------------------\n\n`table.move (a1, f, e, t [,a2])`\n\nMoves elements from the table `a1` to the table `a2`, performing the equivalent to the following multiple assignment: `a2[t],··· = a1[f],···,a1[e]`. The default for `a2` is `a1`. The destination range can overlap with the source range. The number of elements to be moved must fit in a Lua integer.\n\nReturns the destination table `a2`.\n\n--------------------------------------------------------------------------------\n\n`table.pack (···)`\n\nReturns a new table with all arguments stored into keys 1, 2, etc. and with a field \"`n`\" with the total number of arguments. Note that the resulting table may not be a sequence, if some arguments are nil.\n\n--------------------------------------------------------------------------------\n\n`table.remove (list [, pos])`\n\nRemoves from `list` the element at position `pos`, returning the value of the removed element. When `pos` is an integer between 1 and `#list`, it shifts down the elements `list[pos+1], list[pos+2], ···, list[#list]` and erases element `list[#list]`; The index `pos` can also be 0 when `#list` is 0, or `#list + 1`.\n\nThe default value for `pos` is `#list`, so that a call `table.remove(l)` removes the last element of the list `l`.\n\n--------------------------------------------------------------------------------\n\n`table.sort (list [, comp])`\n\nSorts the list elements in a given order, in-place, from `list[1]` to `list[#list]`. If `comp` is given, then it must be a function that receives two list elements and returns true when the first element must come before the second in the final order (so that, after the sort, `i < j` implies `not comp(list[j],list[i])`). If `comp` is not given, then the standard Lua operator `<` is used instead.\n\nNote that the `comp` function must define a strict partial order over the elements in the list; that is, it must be asymmetric and transitive. Otherwise, no valid sort may be possible.\n\nThe sort algorithm is not stable: elements considered equal by the given order may have their relative positions changed by the sort.\n\n--------------------------------------------------------------------------------\n\n`table.unpack (list [, i [, j]])`\n\nReturns the elements from the given list. This function is equivalent to\n\n~~~\n\n return list[i], list[i+1], ···, list[j]\n\n~~~\n\nBy default, `i` is 1 and `j` is `#list`.","name":"_6_6","type":"manual","def":"6.6 – Table Manipulation"},{"doc":"2.5.2 – Generational Garbage Collection\n\nIn generational mode, the collector does frequent minor collections, which traverses only objects recently created. If after a minor collection the use of memory is still above a limit, the collector does a stop-the-world major collection, which traverses all objects. The generational mode uses two parameters: the minor multiplier and the the major multiplier.\n\nThe minor multiplier controls the frequency of minor collections. For a minor multiplier x, a new minor collection will be done when memory grows x% larger than the memory in use after the previous major collection. For instance, for a multiplier of 20, the collector will do a minor collection when the use of memory gets 20% larger than the use after the previous major collection. The default value is 20; the maximum value is 200.\n\nThe major multiplier controls the frequency of major collections. For a major multiplier x, a new major collection will be done when memory grows x% larger than the memory in use after the previous major collection. For instance, for a multiplier of 100, the collector will do a major collection when the use of memory gets larger than twice the use after the previous collection. The default value is 100; the maximum value is 1000.","name":"_2_5_2","type":"manual","def":"2.5.2 – Generational Garbage Collection"},{"doc":"8.3 – Incompatibilities in the API\n\n * Full userdata now has an arbitrary number of associated user values. Therefore, the functions `lua_newuserdata`, `lua_setuservalue`, and `lua_getuservalue` were replaced by `lua_newuserdatauv`, `lua_setiuservalue`, and `lua_getiuservalue`, which have an extra argument.\n\nFor compatibility, the old names still work as macros assuming one single user value. Note, however, that userdata with zero user values are more efficient memory-wise.\n\n * The function `lua_resume` has an extra parameter. This out parameter returns the number of values on the top of the stack that were yielded or returned by the coroutine. (In previous versions, those values were the entire stack.)\n\n * The function `lua_version` returns the version number, instead of an address of the version number. The Lua core should work correctly with libraries using their own static copies of the same core, so there is no need to check whether they are using the same address space.\n\n * The constant `LUA_ERRGCMM` was removed. Errors in finalizers are never propagated; instead, they generate a warning.\n\n * The options `LUA_GCSETPAUSE` and `LUA_GCSETSTEPMUL` of the function `lua_gc` are deprecated. You should use the new option `LUA_GCINC` to set them.","name":"_8_3","type":"manual","def":"8.3 – Incompatibilities in the API"},{"doc":"4.1.2 – Valid and Acceptable Indices\n\nAny function in the API that receives stack indices works only with valid indices or acceptable indices.\n\nA valid index is an index that refers to a position that stores a modifiable Lua value. It comprises stack indices between 1 and the stack top (`1 ≤ abs(index) ≤ top`)\n\nplus pseudo-indices, which represent some positions that are accessible to C code but that are not in the stack. Pseudo-indices are used to access the registry (see §4.3) and the upvalues of a C function (see §4.2).\n\nFunctions that do not need a specific mutable position, but only a value (e.g., query functions), can be called with acceptable indices. An acceptable index can be any valid index, but it also can be any positive index after the stack top within the space allocated for the stack, that is, indices up to the stack size. (Note that 0 is never an acceptable index.) Indices to upvalues (see §4.2) greater than the real number of upvalues in the current C function are also acceptable (but invalid). Except when noted otherwise, functions in the API work with acceptable indices.\n\nAcceptable indices serve to avoid extra tests against the stack top when querying the stack. For instance, a C function can query its third argument without the need to check whether there is a third argument, that is, without the need to check whether 3 is a valid index.\n\nFor functions that can be called with acceptable indices, any non-valid index is treated as if it contains a value of a virtual type `LUA_TNONE`, which behaves like a nil value.","name":"_4_1_2","type":"manual","def":"4.1.2 – Valid and Acceptable Indices"},{"doc":"6.9 – Operating System Facilities\n\nThis library is implemented through table `os`.\n\n--------------------------------------------------------------------------------\n\n`os.clock ()`\n\nReturns an approximation of the amount in seconds of CPU time used by the program, as returned by the underlying ISO C function `clock`.\n\n--------------------------------------------------------------------------------\n\n`os.date ([format [, time]])`\n\nReturns a string or a table containing date and time, formatted according to the given string `format`.\n\nIf the `time` argument is present, this is the time to be formatted (see the `os.time` function for a description of this value). Otherwise, `date` formats the current time.\n\nIf `format` starts with '`!`', then the date is formatted in Coordinated Universal Time. After this optional character, if `format` is the string \"`*t`\", then `date` returns a table with the following fields: `year`, `month` (1–12), `day` (1–31), `hour` (0–23), `min` (0–59), `sec` (0–61, due to leap seconds), `wday` (weekday, 1–7, Sunday is 1), `yday` (day of the year, 1–366), and `isdst` (daylight saving flag, a boolean). This last field may be absent if the information is not available.\n\nIf `format` is not \"`*t`\", then `date` returns the date as a string, formatted according to the same rules as the ISO C function `strftime`.\n\nIf `format` is absent, it defaults to \"`%c`\", which gives a human-readable date and time representation using the current locale.\n\nOn non-POSIX systems, this function may be not thread safe because of its reliance on C function `gmtime` and C function `localtime`.\n\n--------------------------------------------------------------------------------\n\n`os.difftime (t2, t1)`\n\nReturns the difference, in seconds, from time `t1` to time `t2` (where the times are values returned by `os.time`). In POSIX, Windows, and some other systems, this value is exactly `t2`-`t1`.\n\n--------------------------------------------------------------------------------\n\n`os.execute ([command])`\n\nThis function is equivalent to the ISO C function `system`. It passes `command` to be executed by an operating system shell. Its first result is true if the command terminated successfully, or fail otherwise. After this first result the function returns a string plus a number, as follows:\n\n * \"`exit`\": the command terminated normally; the following number is the exit status of the command.\n\n * \"`signal`\": the command was terminated by a signal; the following number is the signal that terminated the command.\n\nWhen called without a `command`, `os.execute` returns a boolean that is true if a shell is available.\n\n--------------------------------------------------------------------------------\n\n`os.exit ([code [, close]])`\n\nCalls the ISO C function `exit` to terminate the host program. If `code` is true, the returned status is `EXIT_SUCCESS`; if `code` is false, the returned status is `EXIT_FAILURE`; if `code` is a number, the returned status is this number. The default value for `code` is true.\n\nIf the optional second argument `close` is true, closes the Lua state before exiting.\n\n--------------------------------------------------------------------------------\n\n`os.getenv (varname)`\n\nReturns the value of the process environment variable `varname` or fail if the variable is not defined.\n\n--------------------------------------------------------------------------------\n\n`os.remove (filename)`\n\nDeletes the file (or empty directory, on POSIX systems) with the given name. If this function fails, it returns fail plus a string describing the error and the error code. Otherwise, it returns true.\n\n--------------------------------------------------------------------------------\n\n`os.rename (oldname, newname)`\n\nRenames the file or directory named `oldname` to `newname`. If this function fails, it returns fail, plus a string describing the error and the error code. Otherwise, it returns true.\n\n--------------------------------------------------------------------------------\n\n`os.setlocale (locale [, category])`\n\nSets the current locale of the program. `locale` is a system-dependent string specifying a locale; `category` is an optional string describing which category to change: `\"all\"`, `\"collate\"`, `\"ctype\"`, `\"monetary\"`, `\"numeric\"`, or `\"time\"`; the default category is `\"all\"`. The function returns the name of the new locale, or fail if the request cannot be honored.\n\nIf `locale` is the empty string, the current locale is set to an implementation-defined native locale. If `locale` is the string \"`C`\", the current locale is set to the standard C locale.\n\nWhen called with nil as the first argument, this function only returns the name of the current locale for the given category.\n\nThis function may be not thread safe because of its reliance on C function `setlocale`.\n\n--------------------------------------------------------------------------------\n\n`os.time ([table])`\n\nReturns the current time when called without arguments, or a time representing the local date and time specified by the given table. This table must have fields `year`, `month`, and `day`, and may have fields `hour` (default is 12), `min` (default is 0), `sec` (default is 0), and `isdst` (default is nil). Other fields are ignored. For a description of these fields, see the `os.date` function.\n\nWhen the function is called, the values in these fields do not need to be inside their valid ranges. For instance, if `sec` is -10, it means 10 seconds before the time specified by the other fields; if `hour` is 1000, it means 1000 hours after the time specified by the other fields.\n\nThe returned value is a number, whose meaning depends on your system. In POSIX, Windows, and some other systems, this number counts the number of seconds since some given start time (the \"epoch\"). In other systems, the meaning is not specified, and the number returned by `time` can be used only as an argument to `os.date` and `os.difftime`.\n\nWhen called with a table, `os.time` also normalizes all the fields documented in the `os.date` function, so that they represent the same time as before the call but with values inside their valid ranges.\n\n--------------------------------------------------------------------------------\n\n`os.tmpname ()`\n\nReturns a string with a file name that can be used for a temporary file. The file must be explicitly opened before its use and explicitly removed when no longer needed.\n\nIn POSIX systems, this function also creates a file with that name, to avoid security risks. (Someone else might create the file with wrong permissions in the time between getting the name and creating the file.) You still have to open the file to use it and to remove it (even if you do not use it).\n\nWhen possible, you may prefer to use `io.tmpfile`, which automatically removes the file when the program ends.","name":"_6_9","type":"manual","def":"6.9 – Operating System Facilities"},{"doc":"3.4.11 – Function Definitions\n\nThe syntax for function definition is\n\n~~~\n\n\tfunctiondef ::= function funcbody\n\tfuncbody ::= ‘(’ [parlist] ‘)’ block end\n\n~~~\n\nThe following syntactic sugar simplifies function definitions:\n\n~~~\n\n\tstat ::= function funcname funcbody\n\tstat ::= local function Name funcbody\n\tfuncname ::= Name {‘.’ Name} [‘:’ Name]\n\n~~~\n\nThe statement\n\n~~~\n\n function f () body end\n\n~~~\n\ntranslates to\n\n~~~\n\n f = function () body end\n\n~~~\n\nThe statement\n\n~~~\n\n function t.a.b.c.f () body end\n\n~~~\n\ntranslates to\n\n~~~\n\n t.a.b.c.f = function () body end\n\n~~~\n\nThe statement\n\n~~~\n\n local function f () body end\n\n~~~\n\ntranslates to\n\n~~~\n\n local f; f = function () body end\n\n~~~\n\nnot to\n\n~~~\n\n local f = function () body end\n\n~~~\n\n(This only makes a difference when the body of the function contains references to `f`.)\n\nA function definition is an executable expression, whose value has type function. When Lua precompiles a chunk, all its function bodies are precompiled too, but they are not created yet. Then, whenever Lua executes the function definition, the function is instantiated (or closed). This function instance, or closure, is the final value of the expression.\n\nParameters act as local variables that are initialized with the argument values:\n\n~~~\n\n\tparlist ::= namelist [‘,’ ‘...’] | ‘...’\n\n~~~\n\nWhen a Lua function is called, it adjusts its list of arguments to the length of its list of parameters, unless the function is a vararg function, which is indicated by three dots ('`...`') at the end of its parameter list. A vararg function does not adjust its argument list; instead, it collects all extra arguments and supplies them to the function through a vararg expression, which is also written as three dots. The value of this expression is a list of all actual extra arguments, similar to a function with multiple results. If a vararg expression is used inside another expression or in the middle of a list of expressions, then its return list is adjusted to one element. If the expression is used as the last element of a list of expressions, then no adjustment is made (unless that last expression is enclosed in parentheses).\n\nAs an example, consider the following definitions:\n\n~~~\n\n function f(a, b) end\n function g(a, b, ...) end\n function r() return 1,2,3 end\n\n~~~\n\nThen, we have the following mapping from arguments to parameters and to the vararg expression:\n\n~~~\n\n CALL PARAMETERS\n \n f(3) a=3, b=nil\n f(3, 4) a=3, b=4\n f(3, 4, 5) a=3, b=4\n f(r(), 10) a=1, b=10\n f(r()) a=1, b=2\n \n g(3) a=3, b=nil, ... --> (nothing)\n g(3, 4) a=3, b=4, ... --> (nothing)\n g(3, 4, 5, 8) a=3, b=4, ... --> 5 8\n g(5, r()) a=5, b=1, ... --> 2 3\n\n~~~\n\nResults are returned using the return statement (see §3.3.4). If control reaches the end of a function without encountering a return statement, then the function returns with no results.\n\nThere is a system-dependent limit on the number of values that a function may return. This limit is guaranteed to be greater than 1000.\n\nThe colon syntax is used to emulate methods, adding an implicit extra parameter `self` to the function. Thus, the statement\n\n~~~\n\n function t.a.b.c:f (params) body end\n\n~~~\n\nis syntactic sugar for\n\n~~~\n\n t.a.b.c.f = function (self, params) body end\n\n~~~","name":"_3_4_11","type":"manual","def":"3.4.11 – Function Definitions"},{"doc":"3.3.4 – Control Structures\n\nThe control structures if, while, and repeat have the usual meaning and familiar syntax:\n\n~~~\n\n\tstat ::= while exp do block end\n\tstat ::= repeat block until exp\n\tstat ::= if exp then block {elseif exp then block} [else block] end\n\n~~~\n\nLua also has a for statement, in two flavors (see §3.3.5).\n\nThe condition expression of a control structure can return any value. Both false and nil test false. All values different from nil and false test true. In particular, the number 0 and the empty string also test true.\n\nIn the repeat–until loop, the inner block does not end at the until keyword, but only after the condition. So, the condition can refer to local variables declared inside the loop block.\n\nThe goto statement transfers the program control to a label. For syntactical reasons, labels in Lua are considered statements too:\n\n~~~\n\n\tstat ::= goto Name\n\tstat ::= label\n\tlabel ::= ‘::’ Name ‘::’\n\n~~~\n\nA label is visible in the entire block where it is defined, except inside nested functions. A goto may jump to any visible label as long as it does not enter into the scope of a local variable. A label should not be declared where a label with the same name is visible, even if this other label has been declared in an enclosing block.\n\nLabels and empty statements are called void statements, as they perform no actions.\n\nThe break statement terminates the execution of a while, repeat, or for loop, skipping to the next statement after the loop:\n\n~~~\n\n\tstat ::= break\n\n~~~\n\nA break ends the innermost enclosing loop.\n\nThe return statement is used to return values from a function or a chunk (which is handled as an anonymous function).\n\nFunctions can return more than one value, so the syntax for the return statement is\n\n~~~\n\n\tstat ::= return [explist] [‘;’]\n\n~~~\n\nThe return statement can only be written as the last statement of a block. If it is necessary to return in the middle of a block, then an explicit inner block can be used, as in the idiom `do return end`, because now return is the last statement in its (inner) block.","name":"_3_3_4","type":"manual","def":"3.3.4 – Control Structures"},{"doc":"8.2 – Incompatibilities in the Libraries\n\n * The function `print` does not call `tostring` to format its arguments; instead, it has this functionality hardwired. You should use `__tostring` to modify how values are printed.\n\n * The pseudo-random number generator used by the function `math.random` now starts with a somewhat random seed. Moreover, it uses a different algorithm.\n\n * By default, the decoding functions in the `utf8` library do not accept surrogates as valid code points. An extra parameter in these functions makes them more permissive.\n\n * The options \"`setpause`\" and \"`setstepmul`\" of the function `collectgarbage` are deprecated. You should use the new option \"`incremental`\" to set them.\n\n * The function `io.lines` now returns four values, instead of just one. That can be a problem when it is used as the sole argument to another function that has optional parameters, such as in `load(io.lines(filename, \"L\"))`. To fix that issue, you can wrap the call into parentheses, to adjust its number of results to one.","name":"_8_2","type":"manual","def":"8.2 – Incompatibilities in the Libraries"},{"doc":"3.4.6 – Concatenation\n\nThe string concatenation operator in Lua is denoted by two dots ('`..`'). If both operands are strings or numbers, then the numbers are converted to strings in a non-specified format (see §3.4.3). Otherwise, the `__concat` metamethod is called (see §2.4).","name":"_3_4_6","type":"manual","def":"3.4.6 – Concatenation"},{"doc":"9 – The Complete Syntax of Lua\n\nHere is the complete syntax of Lua in extended BNF. As usual in extended BNF, {A} means 0 or more As, and [A] means an optional A. (For operator precedences, see §3.4.8; for a description of the terminals Name, Numeral, and LiteralString, see §3.1.)\n\n~~~\n\n\tchunk ::= block\n\n\tblock ::= {stat} [retstat]\n\n\tstat ::= ‘;’ | \n\t\t varlist ‘=’ explist | \n\t\t functioncall | \n\t\t label | \n\t\t break | \n\t\t goto Name | \n\t\t do block end | \n\t\t while exp do block end | \n\t\t repeat block until exp | \n\t\t if exp then block {elseif exp then block} [else block] end | \n\t\t for Name ‘=’ exp ‘,’ exp [‘,’ exp] do block end | \n\t\t for namelist in explist do block end | \n\t\t function funcname funcbody | \n\t\t local function Name funcbody | \n\t\t local attnamelist [‘=’ explist] \n\n\tattnamelist ::= Name attrib {‘,’ Name attrib}\n\n\tattrib ::= [‘<’ Name ‘>’]\n\n\tretstat ::= return [explist] [‘;’]\n\n\tlabel ::= ‘::’ Name ‘::’\n\n\tfuncname ::= Name {‘.’ Name} [‘:’ Name]\n\n\tvarlist ::= var {‘,’ var}\n\n\tvar ::= Name | prefixexp ‘[’ exp ‘]’ | prefixexp ‘.’ Name \n\n\tnamelist ::= Name {‘,’ Name}\n\n\texplist ::= exp {‘,’ exp}\n\n\texp ::= nil | false | true | Numeral | LiteralString | ‘...’ | functiondef | \n\t\t prefixexp | tableconstructor | exp binop exp | unop exp \n\n\tprefixexp ::= var | functioncall | ‘(’ exp ‘)’\n\n\tfunctioncall ::= prefixexp args | prefixexp ‘:’ Name args \n\n\targs ::= ‘(’ [explist] ‘)’ | tableconstructor | LiteralString \n\n\tfunctiondef ::= function funcbody\n\n\tfuncbody ::= ‘(’ [parlist] ‘)’ block end\n\n\tparlist ::= namelist [‘,’ ‘...’] | ‘...’\n\n\ttableconstructor ::= ‘{’ [fieldlist] ‘}’\n\n\tfieldlist ::= field {fieldsep field} [fieldsep]\n\n\tfield ::= ‘[’ exp ‘]’ ‘=’ exp | Name ‘=’ exp | exp\n\n\tfieldsep ::= ‘,’ | ‘;’\n\n\tbinop ::= ‘+’ | ‘-’ | ‘*’ | ‘\/’ | ‘\/\/’ | ‘^’ | ‘%’ | \n\t\t ‘&’ | ‘~’ | ‘|’ | ‘>>’ | ‘<<’ | ‘..’ | \n\t\t ‘<’ | ‘<=’ | ‘>’ | ‘>=’ | ‘==’ | ‘~=’ | \n\t\t and | or\n\n\tunop ::= ‘-’ | not | ‘#’ | ‘~’\n\n~~~\n\nLast update: Thu Jun 18 16:10:16 UTC 2020","name":"_9","type":"manual","def":"9 – The Complete Syntax of Lua"},{"doc":"5 – The Auxiliary Library\n\nThe auxiliary library provides several convenient functions to interface C with Lua. While the basic API provides the primitive functions for all interactions between C and Lua, the auxiliary library provides higher-level functions for some common tasks.\n\nAll functions and types from the auxiliary library are defined in header file `lauxlib.h` and have a prefix `luaL_`.\n\nAll functions in the auxiliary library are built on top of the basic API, and so they provide nothing that cannot be done with that API. Nevertheless, the use of the auxiliary library ensures more consistency to your code.\n\nSeveral functions in the auxiliary library use internally some extra stack slots. When a function in the auxiliary library uses less than five slots, it does not check the stack size; it simply assumes that there are enough slots.\n\nSeveral functions in the auxiliary library are used to check C function arguments. Because the error message is formatted for arguments (e.g., \"`bad argument #1`\"), you should not use these functions for other stack values.\n\nFunctions called `luaL_check*` always raise an error if the check is not satisfied.","name":"_5","type":"manual","def":"5 – The Auxiliary Library"},{"doc":"6 – The Standard Libraries\n\nThe standard Lua libraries provide useful functions that are implemented in C through the C API. Some of these functions provide essential services to the language (e.g., `type` and `getmetatable`); others provide access to outside services (e.g., I\/O); and others could be implemented in Lua itself, but that for different reasons deserve an implementation in C (e.g., `table.sort`).\n\nAll libraries are implemented through the official C API and are provided as separate C modules. Unless otherwise noted, these library functions do not adjust its number of arguments to its expected parameters. For instance, a function documented as `foo(arg)` should not be called without an argument.\n\nThe notation fail means a false value representing some kind of failure. (Currently, fail is equal to nil, but that may change in future versions. The recommendation is to always test the success of these functions with `(not status)`, instead of `(status == nil)`.)\n\nCurrently, Lua has the following standard libraries:\n\n * basic library (§6.1);\n\n * coroutine library (§6.2);\n\n * package library (§6.3);\n\n * string manipulation (§6.4);\n\n * basic UTF-8 support (§6.5);\n\n * table manipulation (§6.6);\n\n * mathematical functions (§6.7) (sin, log, etc.);\n\n * input and output (§6.8);\n\n * operating system facilities (§6.9);\n\n * debug facilities (§6.10).\n\nExcept for the basic and the package libraries, each library provides all its functions as fields of a global table or as methods of its objects.\n\nTo have access to these libraries, the C host program should call the `luaL_openlibs` function, which opens all standard libraries. Alternatively, the host program can open them individually by using `luaL_requiref` to call `luaopen_base` (for the basic library), `luaopen_package` (for the package library), `luaopen_coroutine` (for the coroutine library), `luaopen_string` (for the string library), `luaopen_utf8` (for the UTF-8 library), `luaopen_table` (for the table library), `luaopen_math` (for the mathematical library), `luaopen_io` (for the I\/O library), `luaopen_os` (for the operating system library), and `luaopen_debug` (for the debug library). These functions are declared in `lualib.h`.","name":"_6","type":"manual","def":"6 – The Standard Libraries"},{"doc":"7 – Lua Standalone\n\nAlthough Lua has been designed as an extension language, to be embedded in a host C program, it is also frequently used as a standalone language. An interpreter for Lua as a standalone language, called simply `lua`, is provided with the standard distribution. The standalone interpreter includes all standard libraries. Its usage is:\n\n~~~\n\n lua [options] [script [args]]\n\n~~~\n\nThe options are:\n\n * `-e stat`: execute string stat;\n * `-i`: enter interactive mode after running script;\n * `-l mod`: \"require\" mod and assign the\n result to global mod;\n * `-v`: print version information;\n * `-E`: ignore environment variables;\n * `-W`: turn warnings on;\n * `--`: stop handling options;\n * `-`: execute `stdin` as a file and stop handling options.\n\nAfter handling its options, `lua` runs the given script. When called without arguments, `lua` behaves as `lua -v -i` when the standard input (`stdin`) is a terminal, and as `lua -` otherwise.\n\nWhen called without the option `-E`, the interpreter checks for an environment variable `LUA_INIT_5_4` (or `LUA_INIT` if the versioned name is not defined) before running any argument. If the variable content has the format `@filename`, then `lua` executes the file. Otherwise, `lua` executes the string itself.\n\nWhen called with the option `-E`, Lua does not consult any environment variables. In particular, the values of `package.path` and `package.cpath` are set with the default paths defined in `luaconf.h`.\n\nThe options `-e`, `-l`, and `-W` are handled in the order they appear. For instance, an invocation like\n\n~~~\n\n $ lua -e 'a=1' -llib1 script.lua\n\n~~~\n\nwill first set `a` to 1, then require the library `lib1`, and finally run the file `script.lua` with no arguments. (Here `$` is the shell prompt. Your prompt may be different.)\n\nBefore running any code, `lua` collects all command-line arguments in a global table called `arg`. The script name goes to index 0, the first argument after the script name goes to index 1, and so on. Any arguments before the script name (that is, the interpreter name plus its options) go to negative indices. For instance, in the call\n\n~~~\n\n $ lua -la b.lua t1 t2\n\n~~~\n\nthe table is like this:\n\n~~~\n\n arg = { [-2] = \"lua\", [-1] = \"-la\",\n [0] = \"b.lua\",\n [1] = \"t1\", [2] = \"t2\" }\n\n~~~\n\nIf there is no script in the call, the interpreter name goes to index 0, followed by the other arguments. For instance, the call\n\n~~~\n\n $ lua -e \"print(arg[1])\"\n\n~~~\n\nwill print \"`-e`\". If there is a script, the script is called with arguments `arg[1]`, ···, `arg[#arg]`. Like all chunks in Lua, the script is compiled as a vararg function.\n\nIn interactive mode, Lua repeatedly prompts and waits for a line. After reading a line, Lua first try to interpret the line as an expression. If it succeeds, it prints its value. Otherwise, it interprets the line as a statement. If you write an incomplete statement, the interpreter waits for its completion by issuing a different prompt.\n\nIf the global variable `_PROMPT` contains a string, then its value is used as the prompt. Similarly, if the global variable `_PROMPT2` contains a string, its value is used as the secondary prompt (issued during incomplete statements).\n\nIn case of unprotected errors in the script, the interpreter reports the error to the standard error stream. If the error object is not a string but has a metamethod `__tostring`, the interpreter calls this metamethod to produce the final message. Otherwise, the interpreter converts the error object to a string and adds a stack traceback to it. When warnings are on, they are simply printed in the standard error output.\n\nWhen finishing normally, the interpreter closes its main Lua state (see `lua_close`). The script can avoid this step by calling `os.exit` to terminate.\n\nTo allow the use of Lua as a script interpreter in Unix systems, Lua skips the first line of a file chunk if it starts with `#`. Therefore, Lua scripts can be made into executable programs by using `chmod +x` and the `#!` form, as in\n\n~~~\n\n #!\/usr\/local\/bin\/lua\n\n~~~\n\nOf course, the location of the Lua interpreter may be different in your machine. If `lua` is in your `PATH`, then\n\n~~~\n\n #!\/usr\/bin\/env lua\n\n~~~\n\nis a more portable solution.","name":"_7","type":"manual","def":"7 – Lua Standalone"},{"doc":"8 – Incompatibilities with the Previous Version\n\nHere we list the incompatibilities that you may find when moving a program from Lua 5.3 to Lua 5.4.\n\nYou can avoid some incompatibilities by compiling Lua with appropriate options (see file `luaconf.h`). However, all these compatibility options will be removed in the future. More often than not, compatibility issues arise when these compatibility options are removed. So, whenever you have the chance, you should try to test your code with a version of Lua compiled with all compatibility options turned off. That will ease transitions to newer versions of Lua.\n\nLua versions can always change the C API in ways that do not imply source-code changes in a program, such as the numeric values for constants or the implementation of functions as macros. Therefore, you should never assume that binaries are compatible between different Lua versions. Always recompile clients of the Lua API when using a new version.\n\nSimilarly, Lua versions can always change the internal representation of precompiled chunks; precompiled chunks are not compatible between different Lua versions.\n\nThe standard paths in the official distribution may change between versions.","name":"_8","type":"manual","def":"8 – Incompatibilities with the Previous Version"},{"doc":"2 – Basic Concepts\n\nThis section describes the basic concepts of the language.","name":"_2","type":"manual","def":"2 – Basic Concepts"},{"doc":"4.5 – Handling Yields in C\n\nInternally, Lua uses the C `longjmp` facility to yield a coroutine. Therefore, if a C function `foo` calls an API function and this API function yields (directly or indirectly by calling another function that yields), Lua cannot return to `foo` any more, because the `longjmp` removes its frame from the C stack.\n\nTo avoid this kind of problem, Lua raises an error whenever it tries to yield across an API call, except for three functions: `lua_yieldk`, `lua_callk`, and `lua_pcallk`. All those functions receive a continuation function (as a parameter named `k`) to continue execution after a yield.\n\nWe need to set some terminology to explain continuations. We have a C function called from Lua which we will call the original function. This original function then calls one of those three functions in the C API, which we will call the callee function, that then yields the current thread. This can happen when the callee function is `lua_yieldk`, or when the callee function is either `lua_callk` or `lua_pcallk` and the function called by them yields.\n\nSuppose the running thread yields while executing the callee function. After the thread resumes, it eventually will finish running the callee function. However, the callee function cannot return to the original function, because its frame in the C stack was destroyed by the yield. Instead, Lua calls a continuation function, which was given as an argument to the callee function. As the name implies, the continuation function should continue the task of the original function.\n\nAs an illustration, consider the following function:\n\n~~~\n\n int original_function (lua_State *L) {\n ... \/* code 1 *\/\n status = lua_pcall(L, n, m, h); \/* calls Lua *\/\n ... \/* code 2 *\/\n }\n\n~~~\n\nNow we want to allow the Lua code being run by `lua_pcall` to yield. First, we can rewrite our function like here:\n\n~~~\n\n int k (lua_State *L, int status, lua_KContext ctx) {\n ... \/* code 2 *\/\n }\n \n int original_function (lua_State *L) {\n ... \/* code 1 *\/\n return k(L, lua_pcall(L, n, m, h), ctx);\n }\n\n~~~\n\nIn the above code, the new function `k` is a continuation function (with type `lua_KFunction`), which should do all the work that the original function was doing after calling `lua_pcall`. Now, we must inform Lua that it must call `k` if the Lua code being executed by `lua_pcall` gets interrupted in some way (errors or yielding), so we rewrite the code as here, replacing `lua_pcall` by `lua_pcallk`:\n\n~~~\n\n int original_function (lua_State *L) {\n ... \/* code 1 *\/\n return k(L, lua_pcallk(L, n, m, h, ctx2, k), ctx1);\n }\n\n~~~\n\nNote the external, explicit call to the continuation: Lua will call the continuation only if needed, that is, in case of errors or resuming after a yield. If the called function returns normally without ever yielding, `lua_pcallk` (and `lua_callk`) will also return normally. (Of course, instead of calling the continuation in that case, you can do the equivalent work directly inside the original function.)\n\nBesides the Lua state, the continuation function has two other parameters: the final status of the call and the context value (`ctx`) that was passed originally to `lua_pcallk`. Lua does not use this context value; it only passes this value from the original function to the continuation function. For `lua_pcallk`, the status is the same value that would be returned by `lua_pcallk`, except that it is `LUA_YIELD` when being executed after a yield (instead of `LUA_OK`). For `lua_yieldk` and `lua_callk`, the status is always `LUA_YIELD` when Lua calls the continuation. (For these two functions, Lua will not call the continuation in case of errors, because they do not handle errors.) Similarly, when using `lua_callk`, you should call the continuation function with `LUA_OK` as the status. (For `lua_yieldk`, there is not much point in calling directly the continuation function, because `lua_yieldk` usually does not return.)\n\nLua treats the continuation function as if it were the original function. The continuation function receives the same Lua stack from the original function, in the same state it would be if the callee function had returned. (For instance, after a `lua_callk` the function and its arguments are removed from the stack and replaced by the results from the call.) It also has the same upvalues. Whatever it returns is handled by Lua as if it were the return of the original function.","name":"_4_5","type":"manual","def":"4.5 – Handling Yields in C"},{"doc":"4.7 – The Debug Interface\n\nLua has no built-in debugging facilities. Instead, it offers a special interface by means of functions and hooks. This interface allows the construction of different kinds of debuggers, profilers, and other tools that need \"inside information\" from the interpreter.\n\n--------------------------------------------------------------------------------\n\n`lua_Debug`\n\n~~~\ntypedef struct lua_Debug {\n int event;\n const char *name; \/* (n) *\/\n const char *namewhat; \/* (n) *\/\n const char *what; \/* (S) *\/\n const char *source; \/* (S) *\/\n size_t srclen; \/* (S) *\/\n int currentline; \/* (l) *\/\n int linedefined; \/* (S) *\/\n int lastlinedefined; \/* (S) *\/\n unsigned char nups; \/* (u) number of upvalues *\/\n unsigned char nparams; \/* (u) number of parameters *\/\n char isvararg; \/* (u) *\/\n char istailcall; \/* (t) *\/\n unsigned short ftransfer; \/* (r) index of first value transferred *\/\n unsigned short ntransfer; \/* (r) number of transferred values *\/\n char short_src[LUA_IDSIZE]; \/* (S) *\/\n \/* private part *\/\n other fields } lua_Debug;\n~~~\n\nA structure used to carry different pieces of information about a function or an activation record. `lua_getstack` fills only the private part of this structure, for later use. To fill the other fields of `lua_Debug` with useful information, you must call `lua_getinfo`.\n\nThe fields of `lua_Debug` have the following meaning:\n\n * `source`: the source of the chunk that created the function. If `source` starts with a '`@`', it means that the function was defined in a file where the file name follows the '`@`'. If `source` starts with a '`=`', the remainder of its contents describes the source in a user-dependent manner. Otherwise, the function was defined in a string where `source` is that string.\n\n * `srclen`: The length of the string `source`.\n\n * `short_src`: a \"printable\" version of `source`, to be used in error messages.\n\n * `linedefined`: the line number where the definition of the function starts.\n\n * `lastlinedefined`: the line number where the definition of the function ends.\n\n * `what`: the string `\"Lua\"` if the function is a Lua function, `\"C\"` if it is a C function, `\"main\"` if it is the main part of a chunk.\n\n * `currentline`: the current line where the given function is executing. When no line information is available, `currentline` is set to -1.\n\n * `name`: a reasonable name for the given function. Because functions in Lua are first-class values, they do not have a fixed name: some functions can be the value of multiple global variables, while others can be stored only in a table field. The `lua_getinfo` function checks how the function was called to find a suitable name. If it cannot find a name, then `name` is set to `NULL`.\n\n * `namewhat`: explains the `name` field. The value of `namewhat` can be `\"global\"`, `\"local\"`, `\"method\"`, `\"field\"`, `\"upvalue\"`, or `\"\"` (the empty string), according to how the function was called. (Lua uses the empty string when no other option seems to apply.)\n\n * `istailcall`: true if this function invocation was called by a tail call. In this case, the caller of this level is not in the stack.\n\n * `nups`: the number of upvalues of the function.\n\n * `nparams`: the number of parameters of the function (always 0 for C functions).\n\n * `isvararg`: true if the function is a vararg function (always true for C functions).\n\n * `ftransfer`: the index on the stack of the first value being \"transferred\", that is, parameters in a call or return values in a return. (The other values are in consecutive indices.) Using this index, you can access and modify these values through `lua_getlocal` and `lua_setlocal`. This field is only meaningful during a call hook, denoting the first parameter, or a return hook, denoting the first value being returned. (For call hooks, this value is always 1.)\n\n * `ntransfer`: The number of values being transferred (see previous item). (For calls of Lua functions, this value is always equal to `nparams`.)\n\n--------------------------------------------------------------------------------\n\n`lua_gethook`\n\n[-0, +0, –]\n\n~~~\nlua_Hook lua_gethook (lua_State *L);\n~~~\n\nReturns the current hook function.\n\n--------------------------------------------------------------------------------\n\n`lua_gethookcount`\n\n[-0, +0, –]\n\n~~~\nint lua_gethookcount (lua_State *L);\n~~~\n\nReturns the current hook count.\n\n--------------------------------------------------------------------------------\n\n`lua_gethookmask`\n\n[-0, +0, –]\n\n~~~\nint lua_gethookmask (lua_State *L);\n~~~\n\nReturns the current hook mask.\n\n--------------------------------------------------------------------------------\n\n`lua_getinfo`\n\n[-(0|1), +(0|1|2), m]\n\n~~~\nint lua_getinfo (lua_State *L, const char *what, lua_Debug *ar);\n~~~\n\nGets information about a specific function or function invocation.\n\nTo get information about a function invocation, the parameter `ar` must be a valid activation record that was filled by a previous call to `lua_getstack` or given as argument to a hook (see `lua_Hook`).\n\nTo get information about a function, you push it onto the stack and start the `what` string with the character '`>`'. (In that case, `lua_getinfo` pops the function from the top of the stack.) For instance, to know in which line a function `f` was defined, you can write the following code:\n\n~~~\n\n lua_Debug ar;\n lua_getglobal(L, \"f\"); \/* get global 'f' *\/\n lua_getinfo(L, \">S\", &ar);\n printf(\"%d\\n\", ar.linedefined);\n\n~~~\n\nEach character in the string `what` selects some fields of the structure `ar` to be filled or a value to be pushed on the stack:\n\n * '`n`': fills in the field `name` and `namewhat`;\n\n * '`S`': fills in the fields `source`, `short_src`, `linedefined`, `lastlinedefined`, and `what`;\n\n * '`l`': fills in the field `currentline`;\n\n * '`t`': fills in the field `istailcall`;\n\n * '`u`': fills in the fields `nups`, `nparams`, and `isvararg`;\n\n * '`f`': pushes onto the stack the function that is running at the given level;\n\n * '`L`': pushes onto the stack a table whose indices are the numbers of the lines that are valid on the function. (A valid line is a line with some associated code, that is, a line where you can put a break point. Non-valid lines include empty lines and comments.)\n\nIf this option is given together with option '`f`', its table is pushed after the function.\n\nThis is the only option that can raise a memory error.\n\nThis function returns 0 to signal an invalid option in `what`; even then the valid options are handled correctly.\n\n--------------------------------------------------------------------------------\n\n`lua_getlocal`\n\n[-0, +(0|1), –]\n\n~~~\nconst char *lua_getlocal (lua_State *L, const lua_Debug *ar, int n);\n~~~\n\nGets information about a local variable or a temporary value of a given activation record or a given function.\n\nIn the first case, the parameter `ar` must be a valid activation record that was filled by a previous call to `lua_getstack` or given as argument to a hook (see `lua_Hook`). The index `n` selects which local variable to inspect; see `debug.getlocal` for details about variable indices and names.\n\n`lua_getlocal` pushes the variable's value onto the stack and returns its name.\n\nIn the second case, `ar` must be `NULL` and the function to be inspected must be on the top of the stack. In this case, only parameters of Lua functions are visible (as there is no information about what variables are active) and no values are pushed onto the stack.\n\nReturns `NULL` (and pushes nothing) when the index is greater than the number of active local variables.\n\n--------------------------------------------------------------------------------\n\n`lua_getstack`\n\n[-0, +0, –]\n\n~~~\nint lua_getstack (lua_State *L, int level, lua_Debug *ar);\n~~~\n\nGets information about the interpreter runtime stack.\n\nThis function fills parts of a `lua_Debug` structure with an identification of the activation record of the function executing at a given level. Level 0 is the current running function, whereas level n+1 is the function that has called level n (except for tail calls, which do not count on the stack). When called with a level greater than the stack depth, `lua_getstack` returns 0; otherwise it returns 1.\n\n--------------------------------------------------------------------------------\n\n`lua_getupvalue`\n\n[-0, +(0|1), –]\n\n~~~\nconst char *lua_getupvalue (lua_State *L, int funcindex, int n);\n~~~\n\nGets information about the `n`-th upvalue of the closure at index `funcindex`. It pushes the upvalue's value onto the stack and returns its name. Returns `NULL` (and pushes nothing) when the index `n` is greater than the number of upvalues.\n\nSee `debug.getupvalue` for more information about upvalues.\n\n--------------------------------------------------------------------------------\n\n`lua_Hook`\n\n~~~\ntypedef void (*lua_Hook) (lua_State *L, lua_Debug *ar);\n~~~\n\nType for debugging hook functions.\n\nWhenever a hook is called, its `ar` argument has its field `event` set to the specific event that triggered the hook. Lua identifies these events with the following constants: `LUA_HOOKCALL`, `LUA_HOOKRET`, `LUA_HOOKTAILCALL`, `LUA_HOOKLINE`, and `LUA_HOOKCOUNT`. Moreover, for line events, the field `currentline` is also set. To get the value of any other field in `ar`, the hook must call `lua_getinfo`.\n\nFor call events, `event` can be `LUA_HOOKCALL`, the normal value, or `LUA_HOOKTAILCALL`, for a tail call; in this case, there will be no corresponding return event.\n\nWhile Lua is running a hook, it disables other calls to hooks. Therefore, if a hook calls back Lua to execute a function or a chunk, this execution occurs without any calls to hooks.\n\nHook functions cannot have continuations, that is, they cannot call `lua_yieldk`, `lua_pcallk`, or `lua_callk` with a non-null `k`.\n\nHook functions can yield under the following conditions: Only count and line events can yield; to yield, a hook function must finish its execution calling `lua_yield` with `nresults` equal to zero (that is, with no values).\n\n--------------------------------------------------------------------------------\n\n`lua_setcstacklimit`\n\n[-0, +0, –]\n\n~~~\nint (lua_setcstacklimit) (lua_State *L, unsigned int limit);\n~~~\n\nSets a new limit for the C stack. This limit controls how deeply nested calls can go in Lua, with the intent of avoiding a stack overflow. Returns the old limit in case of success, or zero in case of error. For more details about this function, see `debug.setcstacklimit`, its equivalent in the standard library.\n\n--------------------------------------------------------------------------------\n\n`lua_sethook`\n\n[-0, +0, –]\n\n~~~\nvoid lua_sethook (lua_State *L, lua_Hook f, int mask, int count);\n~~~\n\nSets the debugging hook function.\n\nArgument `f` is the hook function. `mask` specifies on which events the hook will be called: it is formed by a bitwise OR of the constants `LUA_MASKCALL`, `LUA_MASKRET`, `LUA_MASKLINE`, and `LUA_MASKCOUNT`. The `count` argument is only meaningful when the mask includes `LUA_MASKCOUNT`. For each event, the hook is called as explained below:\n\n * The call hook: is called when the interpreter calls a function. The hook is called just after Lua enters the new function, before the function gets its arguments.\n\n * The return hook: is called when the interpreter returns from a function. The hook is called just before Lua leaves the function.\n\n * The line hook: is called when the interpreter is about to start the execution of a new line of code, or when it jumps back in the code (even to the same line). This event only happens while Lua is executing a Lua function.\n\n * The count hook: is called after the interpreter executes every `count` instructions. This event only happens while Lua is executing a Lua function.\n\nHooks are disabled by setting `mask` to zero.\n\n--------------------------------------------------------------------------------\n\n`lua_setlocal`\n\n[-(0|1), +0, –]\n\n~~~\nconst char *lua_setlocal (lua_State *L, const lua_Debug *ar, int n);\n~~~\n\nSets the value of a local variable of a given activation record. It assigns the value on the top of the stack to the variable and returns its name. It also pops the value from the stack.\n\nReturns `NULL` (and pops nothing) when the index is greater than the number of active local variables.\n\nParameters `ar` and `n` are as in the function `lua_getlocal`.\n\n--------------------------------------------------------------------------------\n\n`lua_setupvalue`\n\n[-(0|1), +0, –]\n\n~~~\nconst char *lua_setupvalue (lua_State *L, int funcindex, int n);\n~~~\n\nSets the value of a closure's upvalue. It assigns the value on the top of the stack to the upvalue and returns its name. It also pops the value from the stack.\n\nReturns `NULL` (and pops nothing) when the index `n` is greater than the number of upvalues.\n\nParameters `funcindex` and `n` are as in the function `lua_getupvalue`.\n\n--------------------------------------------------------------------------------\n\n`lua_upvalueid`\n\n[-0, +0, –]\n\n~~~\nvoid *lua_upvalueid (lua_State *L, int funcindex, int n);\n~~~\n\nReturns a unique identifier for the upvalue numbered `n` from the closure at index `funcindex`.\n\nThese unique identifiers allow a program to check whether different closures share upvalues. Lua closures that share an upvalue (that is, that access a same external local variable) will return identical ids for those upvalue indices.\n\nParameters `funcindex` and `n` are as in the function `lua_getupvalue`, but `n` cannot be greater than the number of upvalues.\n\n--------------------------------------------------------------------------------\n\n`lua_upvaluejoin`\n\n[-0, +0, –]\n\n~~~\nvoid lua_upvaluejoin (lua_State *L, int funcindex1, int n1,\n int funcindex2, int n2);\n~~~\n\nMake the `n1`-th upvalue of the Lua closure at index `funcindex1` refer to the `n2`-th upvalue of the Lua closure at index `funcindex2`.","name":"_4_7","type":"manual","def":"4.7 – The Debug Interface"},{"doc":"6.8 – Input and Output Facilities\n\nThe I\/O library provides two different styles for file manipulation. The first one uses implicit file handles; that is, there are operations to set a default input file and a default output file, and all input\/output operations are done over these default files. The second style uses explicit file handles.\n\nWhen using implicit file handles, all operations are supplied by table `io`. When using explicit file handles, the operation `io.open` returns a file handle and then all operations are supplied as methods of the file handle.\n\nThe metatable for file handles provides metamethods for `__gc` and `__close` that try to close the file when called.\n\nThe table `io` also provides three predefined file handles with their usual meanings from C: `io.stdin`, `io.stdout`, and `io.stderr`. The I\/O library never closes these files.\n\nUnless otherwise stated, all I\/O functions return fail on failure, plus an error message as a second result and a system-dependent error code as a third result, and some non-false value on success. On non-POSIX systems, the computation of the error message and error code in case of errors may be not thread safe, because they rely on the global C variable `errno`.\n\n--------------------------------------------------------------------------------\n\n`io.close ([file])`\n\nEquivalent to `file:close()`. Without a `file`, closes the default output file.\n\n--------------------------------------------------------------------------------\n\n`io.flush ()`\n\nEquivalent to `io.output():flush()`.\n\n--------------------------------------------------------------------------------\n\n`io.input ([file])`\n\nWhen called with a file name, it opens the named file (in text mode), and sets its handle as the default input file. When called with a file handle, it simply sets this file handle as the default input file. When called without arguments, it returns the current default input file.\n\nIn case of errors this function raises the error, instead of returning an error code.\n\n--------------------------------------------------------------------------------\n\n`io.lines ([filename, ···])`\n\nOpens the given file name in read mode and returns an iterator function that works like `file:lines(···)` over the opened file. When the iterator function fails to read any value, it automatically closes the file. Besides the iterator function, `io.lines` returns three other values: two nil values as placeholders, plus the created file handle. Therefore, when used in a generic for loop, the file is closed also if the loop is interrupted by an error or a break.\n\nThe call `io.lines()` (with no file name) is equivalent to `io.input():lines(\"l\")`; that is, it iterates over the lines of the default input file. In this case, the iterator does not close the file when the loop ends.\n\nIn case of errors opening the file, this function raises the error, instead of returning an error code.\n\n--------------------------------------------------------------------------------\n\n`io.open (filename [, mode])`\n\nThis function opens a file, in the mode specified in the string `mode`. In case of success, it returns a new file handle.\n\nThe `mode` string can be any of the following:\n\n * \"`r`\": read mode (the default);\n * \"`w`\": write mode;\n * \"`a`\": append mode;\n * \"`r+`\": update mode, all previous data is preserved;\n * \"`w+`\": update mode, all previous data is erased;\n * \"`a+`\": append update mode, previous data is preserved,\n writing is only allowed at the end of file.\n\nThe `mode` string can also have a '`b`' at the end, which is needed in some systems to open the file in binary mode.\n\n--------------------------------------------------------------------------------\n\n`io.output ([file])`\n\nSimilar to `io.input`, but operates over the default output file.\n\n--------------------------------------------------------------------------------\n\n`io.popen (prog [, mode])`\n\nThis function is system dependent and is not available on all platforms.\n\nStarts the program `prog` in a separated process and returns a file handle that you can use to read data from this program (if `mode` is `\"r\"`, the default) or to write data to this program (if `mode` is `\"w\"`).\n\n--------------------------------------------------------------------------------\n\n`io.read (···)`\n\nEquivalent to `io.input():read(···)`.\n\n--------------------------------------------------------------------------------\n\n`io.tmpfile ()`\n\nIn case of success, returns a handle for a temporary file. This file is opened in update mode and it is automatically removed when the program ends.\n\n--------------------------------------------------------------------------------\n\n`io.type (obj)`\n\nChecks whether `obj` is a valid file handle. Returns the string `\"file\"` if `obj` is an open file handle, `\"closed file\"` if `obj` is a closed file handle, or fail if `obj` is not a file handle.\n\n--------------------------------------------------------------------------------\n\n`io.write (···)`\n\nEquivalent to `io.output():write(···)`.\n\n--------------------------------------------------------------------------------\n\n`file:close ()`\n\nCloses `file`. Note that files are automatically closed when their handles are garbage collected, but that takes an unpredictable amount of time to happen.\n\nWhen closing a file handle created with `io.popen`, `file:close` returns the same values returned by `os.execute`.\n\n--------------------------------------------------------------------------------\n\n`file:flush ()`\n\nSaves any written data to `file`.\n\n--------------------------------------------------------------------------------\n\n`file:lines (···)`\n\nReturns an iterator function that, each time it is called, reads the file according to the given formats. When no format is given, uses \"`l`\" as a default. As an example, the construction\n\n~~~\n\n for c in file:lines(1) do body end\n\n~~~\n\nwill iterate over all characters of the file, starting at the current position. Unlike `io.lines`, this function does not close the file when the loop ends.\n\n--------------------------------------------------------------------------------\n\n`file:read (···)`\n\nReads the file `file`, according to the given formats, which specify what to read. For each format, the function returns a string or a number with the characters read, or fail if it cannot read data with the specified format. (In this latter case, the function does not read subsequent formats.) When called without arguments, it uses a default format that reads the next line (see below).\n\nThe available formats are\n\n * \"`n`\": reads a numeral and returns it as a float or an integer, following the lexical conventions of Lua. (The numeral may have leading whitespaces and a sign.) This format always reads the longest input sequence that is a valid prefix for a numeral; if that prefix does not form a valid numeral (e.g., an empty string, \"`0x`\", or \"`3.4e-`\") or it is too long (more than 200 characters), it is discarded and the format returns fail.\n\n * \"`a`\": reads the whole file, starting at the current position. On end of file, it returns the empty string; this format never fails.\n\n * \"`l`\": reads the next line skipping the end of line, returning fail on end of file. This is the default format.\n\n * \"`L`\": reads the next line keeping the end-of-line character (if present), returning fail on end of file.\n\n * number: reads a string with up to this number of bytes, returning fail on end of file. If `number` is zero, it reads nothing and returns an empty string, or fail on end of file.\n\nThe formats \"`l`\" and \"`L`\" should be used only for text files.\n\n--------------------------------------------------------------------------------\n\n`file:seek ([whence [, offset]])`\n\nSets and gets the file position, measured from the beginning of the file, to the position given by `offset` plus a base specified by the string `whence`, as follows:\n\n * \"`set`\": base is position 0 (beginning of the file);\n * \"`cur`\": base is current position;\n * \"`end`\": base is end of file;\n\nIn case of success, `seek` returns the final file position, measured in bytes from the beginning of the file. If `seek` fails, it returns fail, plus a string describing the error.\n\nThe default value for `whence` is `\"cur\"`, and for `offset` is 0. Therefore, the call `file:seek()` returns the current file position, without changing it; the call `file:seek(\"set\")` sets the position to the beginning of the file (and returns 0); and the call `file:seek(\"end\")` sets the position to the end of the file, and returns its size.\n\n--------------------------------------------------------------------------------\n\n`file:setvbuf (mode [, size])`\n\nSets the buffering mode for a file. There are three available modes:\n\n * \"`no`\": no buffering.\n * \"`full`\": full buffering.\n * \"`line`\": line buffering.\n\nFor the last two cases, `size` is a hint for the size of the buffer, in bytes. The default is an appropriate size.\n\nThe specific behavior of each mode is non portable; check the underlying ISO C function `setvbuf` in your platform for more details.\n\n--------------------------------------------------------------------------------\n\n`file:write (···)`\n\nWrites the value of each of its arguments to `file`. The arguments must be strings or numbers.\n\nIn case of success, this function returns `file`.","name":"_6_8","type":"manual","def":"6.8 – Input and Output Facilities"},{"doc":"4.1.1 – Stack Size\n\nWhen you interact with the Lua API, you are responsible for ensuring consistency. In particular, you are responsible for controlling stack overflow. You can use the function `lua_checkstack` to ensure that the stack has enough space for pushing new elements.\n\nWhenever Lua calls C, it ensures that the stack has space for at least `LUA_MINSTACK` extra slots. `LUA_MINSTACK` is defined as 20, so that usually you do not have to worry about stack space unless your code has loops pushing elements onto the stack.\n\nWhen you call a Lua function without a fixed number of results (see `lua_call`), Lua ensures that the stack has enough space for all results, but it does not ensure any extra space. So, before pushing anything in the stack after such a call you should use `lua_checkstack`.","name":"_4_1_1","type":"manual","def":"4.1.1 – Stack Size"},{"doc":"2.5.1 – Incremental Garbage Collection\n\nIn incremental mode, each GC cycle performs a mark-and-sweep collection in small steps interleaved with the program's execution. In this mode, the collector uses three numbers to control its garbage-collection cycles: the garbage-collector pause, the garbage-collector step multiplier, and the garbage-collector step size.\n\nThe garbage-collector pause controls how long the collector waits before starting a new cycle. The collector starts a new cycle when the use of memory hits n% of the use after the previous collection. Larger values make the collector less aggressive. Values equal to or less than 100 mean the collector will not wait to start a new cycle. A value of 200 means that the collector waits for the total memory in use to double before starting a new cycle. The default value is 200; the maximum value is 1000.\n\nThe garbage-collector step multiplier controls the speed of the collector relative to memory allocation, that is, how many elements it marks or sweeps for each kilobyte of memory allocated. Larger values make the collector more aggressive but also increase the size of each incremental step. You should not use values less than 100, because they make the collector too slow and can result in the collector never finishing a cycle. The default value is 100; the maximum value is 1000.\n\nThe garbage-collector step size controls the size of each incremental step, specifically how many bytes the interpreter allocates before performing a step. This parameter is logarithmic: A value of n means the interpreter will allocate 2n bytes between steps and perform equivalent work during the step. A large value (e.g., 60) makes the collector a stop-the-world (non-incremental) collector. The default value is 13, which means steps of approximately 8 Kbytes.","name":"_2_5_1","type":"manual","def":"2.5.1 – Incremental Garbage Collection"},{"doc":"6.5 – UTF-8 Support\n\nThis library provides basic support for UTF-8 encoding. It provides all its functions inside the table `utf8`. This library does not provide any support for Unicode other than the handling of the encoding. Any operation that needs the meaning of a character, such as character classification, is outside its scope.\n\nUnless stated otherwise, all functions that expect a byte position as a parameter assume that the given position is either the start of a byte sequence or one plus the length of the subject string. As in the string library, negative indices count from the end of the string.\n\nFunctions that create byte sequences accept all values up to `0x7FFFFFFF`, as defined in the original UTF-8 specification; that implies byte sequences of up to six bytes.\n\nFunctions that interpret byte sequences only accept valid sequences (well formed and not overlong). By default, they only accept byte sequences that result in valid Unicode code points, rejecting values greater than `10FFFF` and surrogates. A boolean argument `lax`, when available, lifts these checks, so that all values up to `0x7FFFFFFF` are accepted. (Not well formed and overlong sequences are still rejected.)\n\n--------------------------------------------------------------------------------\n\n`utf8.char (···)`\n\nReceives zero or more integers, converts each one to its corresponding UTF-8 byte sequence and returns a string with the concatenation of all these sequences.\n\n--------------------------------------------------------------------------------\n\n`utf8.charpattern`\n\nThe pattern (a string, not a function) \"`[\\0-\\x7F\\xC2-\\xFD][\\x80-\\xBF]*`\" (see §6.4.1), which matches exactly one UTF-8 byte sequence, assuming that the subject is a valid UTF-8 string.\n\n--------------------------------------------------------------------------------\n\n`utf8.codes (s [, lax])`\n\nReturns values so that the construction\n\n~~~\n\n for p, c in utf8.codes(s) do body end\n\n~~~\n\nwill iterate over all UTF-8 characters in string `s`, with `p` being the position (in bytes) and `c` the code point of each character. It raises an error if it meets any invalid byte sequence.\n\n--------------------------------------------------------------------------------\n\n`utf8.codepoint (s [, i [, j [, lax]]])`\n\nReturns the code points (as integers) from all characters in `s` that start between byte position `i` and `j` (both included). The default for `i` is 1 and for `j` is `i`. It raises an error if it meets any invalid byte sequence.\n\n--------------------------------------------------------------------------------\n\n`utf8.len (s [, i [, j [, lax]]])`\n\nReturns the number of UTF-8 characters in string `s` that start between positions `i` and `j` (both inclusive). The default for `i` is 1 and for `j` is -1. If it finds any invalid byte sequence, returns fail plus the position of the first invalid byte.\n\n--------------------------------------------------------------------------------\n\n`utf8.offset (s, n [, i])`\n\nReturns the position (in bytes) where the encoding of the `n`-th character of `s` (counting from position `i`) starts. A negative `n` gets characters before position `i`. The default for `i` is 1 when `n` is non-negative and `#s + 1` otherwise, so that `utf8.offset(s, -n)` gets the offset of the `n`-th character from the end of the string. If the specified character is neither in the subject nor right after its end, the function returns fail.\n\nAs a special case, when `n` is 0 the function returns the start of the encoding of the character that contains the `i`-th byte of `s`.\n\nThis function assumes that `s` is a valid UTF-8 string.","name":"_6_5","type":"manual","def":"6.5 – UTF-8 Support"},{"doc":"4.6 – Functions and Types\n\nHere we list all functions and types from the C API in alphabetical order. Each function has an indicator like this: [-o, +p, x]\n\nThe first field, `o`, is how many elements the function pops from the stack. The second field, `p`, is how many elements the function pushes onto the stack. (Any function always pushes its results after popping its arguments.) A field in the form `x|y` means the function can push (or pop) `x` or `y` elements, depending on the situation; an interrogation mark '`?`' means that we cannot know how many elements the function pops\/pushes by looking only at its arguments. (For instance, they may depend on what is on the stack.) The third field, `x`, tells whether the function may raise errors: '`-`' means the function never raises any error; '`m`' means the function may raise only out-of-memory errors; '`v`' means the function may raise the errors explained in the text; '`e`' means the function can run arbitrary Lua code, either directly or through metamethods, and therefore may raise any errors.\n\n--------------------------------------------------------------------------------\n\n`lua_absindex`\n\n[-0, +0, –]\n\n~~~\nint lua_absindex (lua_State *L, int idx);\n~~~\n\nConverts the acceptable index `idx` into an equivalent absolute index (that is, one that does not depend on the stack top).\n\n--------------------------------------------------------------------------------\n\n`lua_Alloc`\n\n~~~\ntypedef void * (*lua_Alloc) (void *ud,\n void *ptr,\n size_t osize,\n size_t nsize);\n~~~\n\nThe type of the memory-allocation function used by Lua states. The allocator function must provide a functionality similar to `realloc`, but not exactly the same. Its arguments are `ud`, an opaque pointer passed to `lua_newstate`; `ptr`, a pointer to the block being allocated\/reallocated\/freed; `osize`, the original size of the block or some code about what is being allocated; and `nsize`, the new size of the block.\n\nWhen `ptr` is not `NULL`, `osize` is the size of the block pointed by `ptr`, that is, the size given when it was allocated or reallocated.\n\nWhen `ptr` is `NULL`, `osize` encodes the kind of object that Lua is allocating. `osize` is any of `LUA_TSTRING`, `LUA_TTABLE`, `LUA_TFUNCTION`, `LUA_TUSERDATA`, or `LUA_TTHREAD` when (and only when) Lua is creating a new object of that type. When `osize` is some other value, Lua is allocating memory for something else.\n\nLua assumes the following behavior from the allocator function:\n\nWhen `nsize` is zero, the allocator must behave like `free` and then return `NULL`.\n\nWhen `nsize` is not zero, the allocator must behave like `realloc`. In particular, the allocator returns `NULL` if and only if it cannot fulfill the request.\n\nHere is a simple implementation for the allocator function. It is used in the auxiliary library by `luaL_newstate`.\n\n~~~\n\n static void *l_alloc (void *ud, void *ptr, size_t osize,\n size_t nsize) {\n (void)ud; (void)osize; \/* not used *\/\n if (nsize == 0) {\n free(ptr);\n return NULL;\n }\n else\n return realloc(ptr, nsize);\n }\n\n~~~\n\nNote that Standard C ensures that `free(NULL)` has no effect and that `realloc(NULL,size)` is equivalent to `malloc(size)`.\n\n--------------------------------------------------------------------------------\n\n`lua_arith`\n\n[-(2|1), +1, e]\n\n~~~\nvoid lua_arith (lua_State *L, int op);\n~~~\n\nPerforms an arithmetic or bitwise operation over the two values (or one, in the case of negations) at the top of the stack, with the value on the top being the second operand, pops these values, and pushes the result of the operation. The function follows the semantics of the corresponding Lua operator (that is, it may call metamethods).\n\nThe value of `op` must be one of the following constants:\n\n * `LUA_OPADD`: performs addition (`+`)\n * `LUA_OPSUB`: performs subtraction (`-`)\n * `LUA_OPMUL`: performs multiplication (`*`)\n * `LUA_OPDIV`: performs float division (`\/`)\n * `LUA_OPIDIV`: performs floor division (`\/\/`)\n * `LUA_OPMOD`: performs modulo (`%`)\n * `LUA_OPPOW`: performs exponentiation (`^`)\n * `LUA_OPUNM`: performs mathematical negation (unary `-`)\n * `LUA_OPBNOT`: performs bitwise NOT (`~`)\n * `LUA_OPBAND`: performs bitwise AND (`&`)\n * `LUA_OPBOR`: performs bitwise OR (`|`)\n * `LUA_OPBXOR`: performs bitwise exclusive OR (`~`)\n * `LUA_OPSHL`: performs left shift (`<<`)\n * `LUA_OPSHR`: performs right shift (`>>`)\n\n--------------------------------------------------------------------------------\n\n`lua_atpanic`\n\n[-0, +0, –]\n\n~~~\nlua_CFunction lua_atpanic (lua_State *L, lua_CFunction panicf);\n~~~\n\nSets a new panic function and returns the old one (see §4.4).\n\n--------------------------------------------------------------------------------\n\n`lua_call`\n\n[-(nargs+1), +nresults, e]\n\n~~~\nvoid lua_call (lua_State *L, int nargs, int nresults);\n~~~\n\nCalls a function. Like regular Lua calls, `lua_call` respects the `__call` metamethod. So, here the word \"function\" means any callable value.\n\nTo do a call you must use the following protocol: first, the function to be called is pushed onto the stack; then, the arguments to the call are pushed in direct order; that is, the first argument is pushed first. Finally you call `lua_call`; `nargs` is the number of arguments that you pushed onto the stack. When the function returns, all arguments and the function value are popped and the call results are pushed onto the stack. The number of results is adjusted to `nresults`, unless `nresults` is `LUA_MULTRET`. In this case, all results from the function are pushed; Lua takes care that the returned values fit into the stack space, but it does not ensure any extra space in the stack. The function results are pushed onto the stack in direct order (the first result is pushed first), so that after the call the last result is on the top of the stack.\n\nAny error while calling and running the function is propagated upwards (with a `longjmp`).\n\nThe following example shows how the host program can do the equivalent to this Lua code:\n\n~~~\n\n a = f(\"how\", t.x, 14)\n\n~~~\n\nHere it is in C:\n\n~~~\n\n lua_getglobal(L, \"f\"); \/* function to be called *\/\n lua_pushliteral(L, \"how\"); \/* 1st argument *\/\n lua_getglobal(L, \"t\"); \/* table to be indexed *\/\n lua_getfield(L, -1, \"x\"); \/* push result of t.x (2nd arg) *\/\n lua_remove(L, -2); \/* remove 't' from the stack *\/\n lua_pushinteger(L, 14); \/* 3rd argument *\/\n lua_call(L, 3, 1); \/* call 'f' with 3 arguments and 1 result *\/\n lua_setglobal(L, \"a\"); \/* set global 'a' *\/\n\n~~~\n\nNote that the code above is balanced: at its end, the stack is back to its original configuration. This is considered good programming practice.\n\n--------------------------------------------------------------------------------\n\n`lua_callk`\n\n[-(nargs + 1), +nresults, e]\n\n~~~\nvoid lua_callk (lua_State *L,\n int nargs,\n int nresults,\n lua_KContext ctx,\n lua_KFunction k);\n~~~\n\nThis function behaves exactly like `lua_call`, but allows the called function to yield (see §4.5).\n\n--------------------------------------------------------------------------------\n\n`lua_CFunction`\n\n~~~\ntypedef int (*lua_CFunction) (lua_State *L);\n~~~\n\nType for C functions.\n\nIn order to communicate properly with Lua, a C function must use the following protocol, which defines the way parameters and results are passed: a C function receives its arguments from Lua in its stack in direct order (the first argument is pushed first). So, when the function starts, `lua_gettop(L)` returns the number of arguments received by the function. The first argument (if any) is at index 1 and its last argument is at index `lua_gettop(L)`. To return values to Lua, a C function just pushes them onto the stack, in direct order (the first result is pushed first), and returns in C the number of results. Any other value in the stack below the results will be properly discarded by Lua. Like a Lua function, a C function called by Lua can also return many results.\n\nAs an example, the following function receives a variable number of numeric arguments and returns their average and their sum:\n\n~~~\n\n static int foo (lua_State *L) {\n int n = lua_gettop(L); \/* number of arguments *\/\n lua_Number sum = 0.0;\n int i;\n for (i = 1; i <= n; i++) {\n if (!lua_isnumber(L, i)) {\n lua_pushliteral(L, \"incorrect argument\");\n lua_error(L);\n }\n sum += lua_tonumber(L, i);\n }\n lua_pushnumber(L, sum\/n); \/* first result *\/\n lua_pushnumber(L, sum); \/* second result *\/\n return 2; \/* number of results *\/\n }\n\n~~~\n\n--------------------------------------------------------------------------------\n\n`lua_checkstack`\n\n[-0, +0, –]\n\n~~~\nint lua_checkstack (lua_State *L, int n);\n~~~\n\nEnsures that the stack has space for at least `n` extra slots, that is, that you can safely push up to `n` values into it. It returns false if it cannot fulfill the request, either because it would cause the stack to be greater than a fixed maximum size (typically at least several thousand elements) or because it cannot allocate memory for the extra space. This function never shrinks the stack; if the stack already has space for the extra slots, it is left unchanged.\n\n--------------------------------------------------------------------------------\n\n`lua_close`\n\n[-0, +0, –]\n\n~~~\nvoid lua_close (lua_State *L);\n~~~\n\nClose all active to-be-closed variables in the main thread, release all objects in the given Lua state (calling the corresponding garbage-collection metamethods, if any), and frees all dynamic memory used by this state.\n\nOn several platforms, you may not need to call this function, because all resources are naturally released when the host program ends. On the other hand, long-running programs that create multiple states, such as daemons or web servers, will probably need to close states as soon as they are not needed.\n\n--------------------------------------------------------------------------------\n\n`lua_compare`\n\n[-0, +0, e]\n\n~~~\nint lua_compare (lua_State *L, int index1, int index2, int op);\n~~~\n\nCompares two Lua values. Returns 1 if the value at index `index1` satisfies `op` when compared with the value at index `index2`, following the semantics of the corresponding Lua operator (that is, it may call metamethods). Otherwise returns 0. Also returns 0 if any of the indices is not valid.\n\nThe value of `op` must be one of the following constants:\n\n * `LUA_OPEQ`: compares for equality (`==`)\n * `LUA_OPLT`: compares for less than (`<`)\n * `LUA_OPLE`: compares for less or equal (`<=`)\n\n--------------------------------------------------------------------------------\n\n`lua_concat`\n\n[-n, +1, e]\n\n~~~\nvoid lua_concat (lua_State *L, int n);\n~~~\n\nConcatenates the `n` values at the top of the stack, pops them, and leaves the result on the top. If `n` is 1, the result is the single value on the stack (that is, the function does nothing); if `n` is 0, the result is the empty string. Concatenation is performed following the usual semantics of Lua (see §3.4.6).\n\n--------------------------------------------------------------------------------\n\n`lua_copy`\n\n[-0, +0, –]\n\n~~~\nvoid lua_copy (lua_State *L, int fromidx, int toidx);\n~~~\n\nCopies the element at index `fromidx` into the valid index `toidx`, replacing the value at that position. Values at other positions are not affected.\n\n--------------------------------------------------------------------------------\n\n`lua_createtable`\n\n[-0, +1, m]\n\n~~~\nvoid lua_createtable (lua_State *L, int narr, int nrec);\n~~~\n\nCreates a new empty table and pushes it onto the stack. Parameter `narr` is a hint for how many elements the table will have as a sequence; parameter `nrec` is a hint for how many other elements the table will have. Lua may use these hints to preallocate memory for the new table. This preallocation may help performance when you know in advance how many elements the table will have. Otherwise you can use the function `lua_newtable`.\n\n--------------------------------------------------------------------------------\n\n`lua_dump`\n\n[-0, +0, –]\n\n~~~\nint lua_dump (lua_State *L,\n lua_Writer writer,\n void *data,\n int strip);\n~~~\n\nDumps a function as a binary chunk. Receives a Lua function on the top of the stack and produces a binary chunk that, if loaded again, results in a function equivalent to the one dumped. As it produces parts of the chunk, `lua_dump` calls function `writer` (see `lua_Writer`) with the given `data` to write them.\n\nIf `strip` is true, the binary representation may not include all debug information about the function, to save space.\n\nThe value returned is the error code returned by the last call to the writer; 0 means no errors.\n\nThis function does not pop the Lua function from the stack.\n\n--------------------------------------------------------------------------------\n\n`lua_error`\n\n[-1, +0, v]\n\n~~~\nint lua_error (lua_State *L);\n~~~\n\nRaises a Lua error, using the value on the top of the stack as the error object. This function does a long jump, and therefore never returns (see `luaL_error`).\n\n--------------------------------------------------------------------------------\n\n`lua_gc`\n\n[-0, +0, –]\n\n~~~\nint lua_gc (lua_State *L, int what, ...);\n~~~\n\nControls the garbage collector.\n\nThis function performs several tasks, according to the value of the parameter `what`. For options that need extra arguments, they are listed after the option.\n\n * `LUA_GCCOLLECT`: Performs a full garbage-collection cycle.\n\n * `LUA_GCSTOP`: Stops the garbage collector.\n\n * `LUA_GCRESTART`: Restarts the garbage collector.\n\n * `LUA_GCCOUNT`: Returns the current amount of memory (in Kbytes) in use by Lua.\n\n * `LUA_GCCOUNTB`: Returns the remainder of dividing the current amount of bytes of memory in use by Lua by 1024.\n\n * `LUA_GCSTEP` `(int stepsize)`: Performs an incremental step of garbage collection, corresponding to the allocation of `stepsize` Kbytes.\n\n * `LUA_GCISRUNNING`: Returns a boolean that tells whether the collector is running (i.e., not stopped).\n\n * `LUA_GCINC` (int pause, int stepmul, stepsize): Changes the collector to incremental mode with the given parameters (see §2.5.1). Returns the previous mode (`LUA_GCGEN` or `LUA_GCINC`).\n\n * `LUA_GCGEN` (int minormul, int majormul): Changes the collector to generational mode with the given parameters (see §2.5.2). Returns the previous mode (`LUA_GCGEN` or `LUA_GCINC`).\n\nFor more details about these options, see `collectgarbage`.\n\n--------------------------------------------------------------------------------\n\n`lua_getallocf`\n\n[-0, +0, –]\n\n~~~\nlua_Alloc lua_getallocf (lua_State *L, void **ud);\n~~~\n\nReturns the memory-allocation function of a given state. If `ud` is not `NULL`, Lua stores in `*ud` the opaque pointer given when the memory-allocator function was set.\n\n--------------------------------------------------------------------------------\n\n`lua_getfield`\n\n[-0, +1, e]\n\n~~~\nint lua_getfield (lua_State *L, int index, const char *k);\n~~~\n\nPushes onto the stack the value `t[k]`, where `t` is the value at the given index. As in Lua, this function may trigger a metamethod for the \"index\" event (see §2.4).\n\nReturns the type of the pushed value.\n\n--------------------------------------------------------------------------------\n\n`lua_getextraspace`\n\n[-0, +0, –]\n\n~~~\nvoid *lua_getextraspace (lua_State *L);\n~~~\n\nReturns a pointer to a raw memory area associated with the given Lua state. The application can use this area for any purpose; Lua does not use it for anything.\n\nEach new thread has this area initialized with a copy of the area of the main thread.\n\nBy default, this area has the size of a pointer to void, but you can recompile Lua with a different size for this area. (See `LUA_EXTRASPACE` in `luaconf.h`.)\n\n--------------------------------------------------------------------------------\n\n`lua_getglobal`\n\n[-0, +1, e]\n\n~~~\nint lua_getglobal (lua_State *L, const char *name);\n~~~\n\nPushes onto the stack the value of the global `name`. Returns the type of that value.\n\n--------------------------------------------------------------------------------\n\n`lua_geti`\n\n[-0, +1, e]\n\n~~~\nint lua_geti (lua_State *L, int index, lua_Integer i);\n~~~\n\nPushes onto the stack the value `t[i]`, where `t` is the value at the given index. As in Lua, this function may trigger a metamethod for the \"index\" event (see §2.4).\n\nReturns the type of the pushed value.\n\n--------------------------------------------------------------------------------\n\n`lua_getmetatable`\n\n[-0, +(0|1), –]\n\n~~~\nint lua_getmetatable (lua_State *L, int index);\n~~~\n\nIf the value at the given index has a metatable, the function pushes that metatable onto the stack and returns 1. Otherwise, the function returns 0 and pushes nothing on the stack.\n\n--------------------------------------------------------------------------------\n\n`lua_gettable`\n\n[-1, +1, e]\n\n~~~\nint lua_gettable (lua_State *L, int index);\n~~~\n\nPushes onto the stack the value `t[k]`, where `t` is the value at the given index and `k` is the value on the top of the stack.\n\nThis function pops the key from the stack, pushing the resulting value in its place. As in Lua, this function may trigger a metamethod for the \"index\" event (see §2.4).\n\nReturns the type of the pushed value.\n\n--------------------------------------------------------------------------------\n\n`lua_gettop`\n\n[-0, +0, –]\n\n~~~\nint lua_gettop (lua_State *L);\n~~~\n\nReturns the index of the top element in the stack. Because indices start at 1, this result is equal to the number of elements in the stack; in particular, 0 means an empty stack.\n\n--------------------------------------------------------------------------------\n\n`lua_getiuservalue`\n\n[-0, +1, –]\n\n~~~\nint lua_getiuservalue (lua_State *L, int index, int n);\n~~~\n\nPushes onto the stack the `n`-th user value associated with the full userdata at the given index and returns the type of the pushed value.\n\nIf the userdata does not have that value, pushes nil and returns `LUA_TNONE`.\n\n--------------------------------------------------------------------------------\n\n`lua_insert`\n\n[-1, +1, –]\n\n~~~\nvoid lua_insert (lua_State *L, int index);\n~~~\n\nMoves the top element into the given valid index, shifting up the elements above this index to open space. This function cannot be called with a pseudo-index, because a pseudo-index is not an actual stack position.\n\n--------------------------------------------------------------------------------\n\n`lua_Integer`\n\n~~~\ntypedef ... lua_Integer;\n~~~\n\nThe type of integers in Lua.\n\nBy default this type is `long long`, (usually a 64-bit two-complement integer), but that can be changed to `long` or `int` (usually a 32-bit two-complement integer). (See `LUA_INT_TYPE` in `luaconf.h`.)\n\nLua also defines the constants `LUA_MININTEGER` and `LUA_MAXINTEGER`, with the minimum and the maximum values that fit in this type.\n\n--------------------------------------------------------------------------------\n\n`lua_isboolean`\n\n[-0, +0, –]\n\n~~~\nint lua_isboolean (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a boolean, and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_iscfunction`\n\n[-0, +0, –]\n\n~~~\nint lua_iscfunction (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a C function, and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_isfunction`\n\n[-0, +0, –]\n\n~~~\nint lua_isfunction (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a function (either C or Lua), and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_isinteger`\n\n[-0, +0, –]\n\n~~~\nint lua_isinteger (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is an integer (that is, the value is a number and is represented as an integer), and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_islightuserdata`\n\n[-0, +0, –]\n\n~~~\nint lua_islightuserdata (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a light userdata, and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_isnil`\n\n[-0, +0, –]\n\n~~~\nint lua_isnil (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is nil, and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_isnone`\n\n[-0, +0, –]\n\n~~~\nint lua_isnone (lua_State *L, int index);\n~~~\n\nReturns 1 if the given index is not valid, and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_isnoneornil`\n\n[-0, +0, –]\n\n~~~\nint lua_isnoneornil (lua_State *L, int index);\n~~~\n\nReturns 1 if the given index is not valid or if the value at this index is nil, and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_isnumber`\n\n[-0, +0, –]\n\n~~~\nint lua_isnumber (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a number or a string convertible to a number, and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_isstring`\n\n[-0, +0, –]\n\n~~~\nint lua_isstring (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a string or a number (which is always convertible to a string), and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_istable`\n\n[-0, +0, –]\n\n~~~\nint lua_istable (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a table, and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_isthread`\n\n[-0, +0, –]\n\n~~~\nint lua_isthread (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a thread, and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_isuserdata`\n\n[-0, +0, –]\n\n~~~\nint lua_isuserdata (lua_State *L, int index);\n~~~\n\nReturns 1 if the value at the given index is a userdata (either full or light), and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_isyieldable`\n\n[-0, +0, –]\n\n~~~\nint lua_isyieldable (lua_State *L);\n~~~\n\nReturns 1 if the given coroutine can yield, and 0 otherwise.\n\n--------------------------------------------------------------------------------\n\n`lua_KContext`\n\n~~~\ntypedef ... lua_KContext;\n~~~\n\nThe type for continuation-function contexts. It must be a numeric type. This type is defined as `intptr_t` when `intptr_t` is available, so that it can store pointers too. Otherwise, it is defined as `ptrdiff_t`.\n\n--------------------------------------------------------------------------------\n\n`lua_KFunction`\n\n~~~\ntypedef int (*lua_KFunction) (lua_State *L, int status, lua_KContext ctx);\n~~~\n\nType for continuation functions (see §4.5).\n\n--------------------------------------------------------------------------------\n\n`lua_len`\n\n[-0, +1, e]\n\n~~~\nvoid lua_len (lua_State *L, int index);\n~~~\n\nReturns the length of the value at the given index. It is equivalent to the '`#`' operator in Lua (see §3.4.7) and may trigger a metamethod for the \"length\" event (see §2.4). The result is pushed on the stack.\n\n--------------------------------------------------------------------------------\n\n`lua_load`\n\n[-0, +1, –]\n\n~~~\nint lua_load (lua_State *L,\n lua_Reader reader,\n void *data,\n const char *chunkname,\n const char *mode);\n~~~\n\nLoads a Lua chunk without running it. If there are no errors, `lua_load` pushes the compiled chunk as a Lua function on top of the stack. Otherwise, it pushes an error message.\n\nThe `lua_load` function uses a user-supplied `reader` function to read the chunk (see `lua_Reader`). The `data` argument is an opaque value passed to the reader function.\n\nThe `chunkname` argument gives a name to the chunk, which is used for error messages and in debug information (see §4.7).\n\n`lua_load` automatically detects whether the chunk is text or binary and loads it accordingly (see program `luac`). The string `mode` works as in function `load`, with the addition that a `NULL` value is equivalent to the string \"`bt`\".\n\n`lua_load` uses the stack internally, so the reader function must always leave the stack unmodified when returning.\n\n`lua_load` can return `LUA_OK`, `LUA_ERRSYNTAX`, or `LUA_ERRMEM`. The function may also return other values corresponding to errors raised by the read function (see §4.4.1).\n\nIf the resulting function has upvalues, its first upvalue is set to the value of the global environment stored at index `LUA_RIDX_GLOBALS` in the registry (see §4.3). When loading main chunks, this upvalue will be the `_ENV` variable (see §2.2). Other upvalues are initialized with nil.\n\n--------------------------------------------------------------------------------\n\n`lua_newstate`\n\n[-0, +0, –]\n\n~~~\nlua_State *lua_newstate (lua_Alloc f, void *ud);\n~~~\n\nCreates a new independent state and returns its main thread. Returns `NULL` if it cannot create the state (due to lack of memory). The argument `f` is the allocator function; Lua will do all memory allocation for this state through this function (see `lua_Alloc`). The second argument, `ud`, is an opaque pointer that Lua passes to the allocator in every call.\n\n--------------------------------------------------------------------------------\n\n`lua_newtable`\n\n[-0, +1, m]\n\n~~~\nvoid lua_newtable (lua_State *L);\n~~~\n\nCreates a new empty table and pushes it onto the stack. It is equivalent to `lua_createtable(L, 0, 0)`.\n\n--------------------------------------------------------------------------------\n\n`lua_newthread`\n\n[-0, +1, m]\n\n~~~\nlua_State *lua_newthread (lua_State *L);\n~~~\n\nCreates a new thread, pushes it on the stack, and returns a pointer to a `lua_State` that represents this new thread. The new thread returned by this function shares with the original thread its global environment, but has an independent execution stack.\n\nThreads are subject to garbage collection, like any Lua object.\n\n--------------------------------------------------------------------------------\n\n`lua_newuserdatauv`\n\n[-0, +1, m]\n\n~~~\nvoid *lua_newuserdatauv (lua_State *L, size_t size, int nuvalue);\n~~~\n\nThis function creates and pushes on the stack a new full userdata, with `nuvalue` associated Lua values, called `user values`, plus an associated block of raw memory with `size` bytes. (The user values can be set and read with the functions `lua_setiuservalue` and `lua_getiuservalue`.)\n\nThe function returns the address of the block of memory.\n\n--------------------------------------------------------------------------------\n\n`lua_next`\n\n[-1, +(2|0), v]\n\n~~~\nint lua_next (lua_State *L, int index);\n~~~\n\nPops a key from the stack, and pushes a key–value pair from the table at the given index, the \"next\" pair after the given key. If there are no more elements in the table, then `lua_next` returns 0 and pushes nothing.\n\nA typical table traversal looks like this:\n\n~~~\n\n \/* table is in the stack at index 't' *\/\n lua_pushnil(L); \/* first key *\/\n while (lua_next(L, t) != 0) {\n \/* uses 'key' (at index -2) and 'value' (at index -1) *\/\n printf(\"%s - %s\\n\",\n lua_typename(L, lua_type(L, -2)),\n lua_typename(L, lua_type(L, -1)));\n \/* removes 'value'; keeps 'key' for next iteration *\/\n lua_pop(L, 1);\n }\n\n~~~\n\nWhile traversing a table, avoid calling `lua_tolstring` directly on a key, unless you know that the key is actually a string. Recall that `lua_tolstring` may change the value at the given index; this confuses the next call to `lua_next`.\n\nThis function may raise an error if the given key is neither nil nor present in the table. See function `next` for the caveats of modifying the table during its traversal.\n\n--------------------------------------------------------------------------------\n\n`lua_Number`\n\n~~~\ntypedef ... lua_Number;\n~~~\n\nThe type of floats in Lua.\n\nBy default this type is double, but that can be changed to a single float or a long double. (See `LUA_FLOAT_TYPE` in `luaconf.h`.)\n\n--------------------------------------------------------------------------------\n\n`lua_numbertointeger`\n\n~~~\nint lua_numbertointeger (lua_Number n, lua_Integer *p);\n~~~\n\nTries to convert a Lua float to a Lua integer; the float `n` must have an integral value. If that value is within the range of Lua integers, it is converted to an integer and assigned to `*p`. The macro results in a boolean indicating whether the conversion was successful. (Note that this range test can be tricky to do correctly without this macro, due to rounding.)\n\nThis macro may evaluate its arguments more than once.\n\n--------------------------------------------------------------------------------\n\n`lua_pcall`\n\n[-(nargs + 1), +(nresults|1), –]\n\n~~~\nint lua_pcall (lua_State *L, int nargs, int nresults, int msgh);\n~~~\n\nCalls a function (or a callable object) in protected mode.\n\nBoth `nargs` and `nresults` have the same meaning as in `lua_call`. If there are no errors during the call, `lua_pcall` behaves exactly like `lua_call`. However, if there is any error, `lua_pcall` catches it, pushes a single value on the stack (the error object), and returns an error code. Like `lua_call`, `lua_pcall` always removes the function and its arguments from the stack.\n\nIf `msgh` is 0, then the error object returned on the stack is exactly the original error object. Otherwise, `msgh` is the stack index of a message handler. (This index cannot be a pseudo-index.) In case of runtime errors, this handler will be called with the error object and its return value will be the object returned on the stack by `lua_pcall`.\n\nTypically, the message handler is used to add more debug information to the error object, such as a stack traceback. Such information cannot be gathered after the return of `lua_pcall`, since by then the stack has unwound.\n\nThe `lua_pcall` function returns one of the following status codes: `LUA_OK`, `LUA_ERRRUN`, `LUA_ERRMEM`, or `LUA_ERRERR`.\n\n--------------------------------------------------------------------------------\n\n`lua_pcallk`\n\n[-(nargs + 1), +(nresults|1), –]\n\n~~~\nint lua_pcallk (lua_State *L,\n int nargs,\n int nresults,\n int msgh,\n lua_KContext ctx,\n lua_KFunction k);\n~~~\n\nThis function behaves exactly like `lua_pcall`, except that it allows the called function to yield (see §4.5).\n\n--------------------------------------------------------------------------------\n\n`lua_pop`\n\n[-n, +0, –]\n\n~~~\nvoid lua_pop (lua_State *L, int n);\n~~~\n\nPops `n` elements from the stack.\n\n--------------------------------------------------------------------------------\n\n`lua_pushboolean`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushboolean (lua_State *L, int b);\n~~~\n\nPushes a boolean value with value `b` onto the stack.\n\n--------------------------------------------------------------------------------\n\n`lua_pushcclosure`\n\n[-n, +1, m]\n\n~~~\nvoid lua_pushcclosure (lua_State *L, lua_CFunction fn, int n);\n~~~\n\nPushes a new C closure onto the stack. This function receives a pointer to a C function and pushes onto the stack a Lua value of type `function` that, when called, invokes the corresponding C function. The parameter `n` tells how many upvalues this function will have (see §4.2).\n\nAny function to be callable by Lua must follow the correct protocol to receive its parameters and return its results (see `lua_CFunction`).\n\nWhen a C function is created, it is possible to associate some values with it, the so called upvalues; these upvalues are then accessible to the function whenever it is called. This association is called a C closure (see §4.2). To create a C closure, first the initial values for its upvalues must be pushed onto the stack. (When there are multiple upvalues, the first value is pushed first.) Then `lua_pushcclosure` is called to create and push the C function onto the stack, with the argument `n` telling how many values will be associated with the function. `lua_pushcclosure` also pops these values from the stack.\n\nThe maximum value for `n` is 255.\n\nWhen `n` is zero, this function creates a light C function, which is just a pointer to the C function. In that case, it never raises a memory error.\n\n--------------------------------------------------------------------------------\n\n`lua_pushcfunction`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushcfunction (lua_State *L, lua_CFunction f);\n~~~\n\nPushes a C function onto the stack. This function is equivalent to `lua_pushcclosure` with no upvalues.\n\n--------------------------------------------------------------------------------\n\n`lua_pushfstring`\n\n[-0, +1, v]\n\n~~~\nconst char *lua_pushfstring (lua_State *L, const char *fmt, ...);\n~~~\n\nPushes onto the stack a formatted string and returns a pointer to this string. It is similar to the ISO C function `sprintf`, but has two important differences. First, you do not have to allocate space for the result; the result is a Lua string and Lua takes care of memory allocation (and deallocation, through garbage collection). Second, the conversion specifiers are quite restricted. There are no flags, widths, or precisions. The conversion specifiers can only be '`%%`' (inserts the character '`%`'), '`%s`' (inserts a zero-terminated string, with no size restrictions), '`%f`' (inserts a `lua_Number`), '`%I`' (inserts a `lua_Integer`), '`%p`' (inserts a pointer), '`%d`' (inserts an `int`), '`%c`' (inserts an `int` as a one-byte character), and '`%U`' (inserts a `long int` as a UTF-8 byte sequence).\n\nThis function may raise errors due to memory overflow or an invalid conversion specifier.\n\n--------------------------------------------------------------------------------\n\n`lua_pushglobaltable`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushglobaltable (lua_State *L);\n~~~\n\nPushes the global environment onto the stack.\n\n--------------------------------------------------------------------------------\n\n`lua_pushinteger`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushinteger (lua_State *L, lua_Integer n);\n~~~\n\nPushes an integer with value `n` onto the stack.\n\n--------------------------------------------------------------------------------\n\n`lua_pushlightuserdata`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushlightuserdata (lua_State *L, void *p);\n~~~\n\nPushes a light userdata onto the stack.\n\nUserdata represent C values in Lua. A light userdata represents a pointer, a `void*`. It is a value (like a number): you do not create it, it has no individual metatable, and it is not collected (as it was never created). A light userdata is equal to \"any\" light userdata with the same C address.\n\n--------------------------------------------------------------------------------\n\n`lua_pushliteral`\n\n[-0, +1, m]\n\n~~~\nconst char *lua_pushliteral (lua_State *L, const char *s);\n~~~\n\nThis macro is equivalent to `lua_pushstring`, but should be used only when `s` is a literal string. (Lua may optimize this case.)\n\n--------------------------------------------------------------------------------\n\n`lua_pushlstring`\n\n[-0, +1, m]\n\n~~~\nconst char *lua_pushlstring (lua_State *L, const char *s, size_t len);\n~~~\n\nPushes the string pointed to by `s` with size `len` onto the stack. Lua will make or reuse an internal copy of the given string, so the memory at `s` can be freed or reused immediately after the function returns. The string can contain any binary data, including embedded zeros.\n\nReturns a pointer to the internal copy of the string.\n\n--------------------------------------------------------------------------------\n\n`lua_pushnil`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushnil (lua_State *L);\n~~~\n\nPushes a nil value onto the stack.\n\n--------------------------------------------------------------------------------\n\n`lua_pushnumber`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushnumber (lua_State *L, lua_Number n);\n~~~\n\nPushes a float with value `n` onto the stack.\n\n--------------------------------------------------------------------------------\n\n`lua_pushstring`\n\n[-0, +1, m]\n\n~~~\nconst char *lua_pushstring (lua_State *L, const char *s);\n~~~\n\nPushes the zero-terminated string pointed to by `s` onto the stack. Lua will make or reuse an internal copy of the given string, so the memory at `s` can be freed or reused immediately after the function returns.\n\nReturns a pointer to the internal copy of the string.\n\nIf `s` is `NULL`, pushes nil and returns `NULL`.\n\n--------------------------------------------------------------------------------\n\n`lua_pushthread`\n\n[-0, +1, –]\n\n~~~\nint lua_pushthread (lua_State *L);\n~~~\n\nPushes the thread represented by `L` onto the stack. Returns 1 if this thread is the main thread of its state.\n\n--------------------------------------------------------------------------------\n\n`lua_pushvalue`\n\n[-0, +1, –]\n\n~~~\nvoid lua_pushvalue (lua_State *L, int index);\n~~~\n\nPushes a copy of the element at the given index onto the stack.\n\n--------------------------------------------------------------------------------\n\n`lua_pushvfstring`\n\n[-0, +1, v]\n\n~~~\nconst char *lua_pushvfstring (lua_State *L,\n const char *fmt,\n va_list argp);\n~~~\n\nEquivalent to `lua_pushfstring`, except that it receives a `va_list` instead of a variable number of arguments.\n\n--------------------------------------------------------------------------------\n\n`lua_rawequal`\n\n[-0, +0, –]\n\n~~~\nint lua_rawequal (lua_State *L, int index1, int index2);\n~~~\n\nReturns 1 if the two values in indices `index1` and `index2` are primitively equal (that is, equal without calling the `__eq` metamethod). Otherwise returns 0. Also returns 0 if any of the indices are not valid.\n\n--------------------------------------------------------------------------------\n\n`lua_rawget`\n\n[-1, +1, –]\n\n~~~\nint lua_rawget (lua_State *L, int index);\n~~~\n\nSimilar to `lua_gettable`, but does a raw access (i.e., without metamethods).\n\n--------------------------------------------------------------------------------\n\n`lua_rawgeti`\n\n[-0, +1, –]\n\n~~~\nint lua_rawgeti (lua_State *L, int index, lua_Integer n);\n~~~\n\nPushes onto the stack the value `t[n]`, where `t` is the table at the given index. The access is raw, that is, it does not use the `__index` metavalue.\n\nReturns the type of the pushed value.\n\n--------------------------------------------------------------------------------\n\n`lua_rawgetp`\n\n[-0, +1, –]\n\n~~~\nint lua_rawgetp (lua_State *L, int index, const void *p);\n~~~\n\nPushes onto the stack the value `t[k]`, where `t` is the table at the given index and `k` is the pointer `p` represented as a light userdata. The access is raw; that is, it does not use the `__index` metavalue.\n\nReturns the type of the pushed value.\n\n--------------------------------------------------------------------------------\n\n`lua_rawlen`\n\n[-0, +0, –]\n\n~~~\nlua_Unsigned lua_rawlen (lua_State *L, int index);\n~~~\n\nReturns the raw \"length\" of the value at the given index: for strings, this is the string length; for tables, this is the result of the length operator ('`#`') with no metamethods; for userdata, this is the size of the block of memory allocated for the userdata. For other values, this call returns 0.\n\n--------------------------------------------------------------------------------\n\n`lua_rawset`\n\n[-2, +0, m]\n\n~~~\nvoid lua_rawset (lua_State *L, int index);\n~~~\n\nSimilar to `lua_settable`, but does a raw assignment (i.e., without metamethods).\n\n--------------------------------------------------------------------------------\n\n`lua_rawseti`\n\n[-1, +0, m]\n\n~~~\nvoid lua_rawseti (lua_State *L, int index, lua_Integer i);\n~~~\n\nDoes the equivalent of `t[i] = v`, where `t` is the table at the given index and `v` is the value on the top of the stack.\n\nThis function pops the value from the stack. The assignment is raw, that is, it does not use the `__newindex` metavalue.\n\n--------------------------------------------------------------------------------\n\n`lua_rawsetp`\n\n[-1, +0, m]\n\n~~~\nvoid lua_rawsetp (lua_State *L, int index, const void *p);\n~~~\n\nDoes the equivalent of `t[p] = v`, where `t` is the table at the given index, `p` is encoded as a light userdata, and `v` is the value on the top of the stack.\n\nThis function pops the value from the stack. The assignment is raw, that is, it does not use the `__newindex` metavalue.\n\n--------------------------------------------------------------------------------\n\n`lua_Reader`\n\n~~~\ntypedef const char * (*lua_Reader) (lua_State *L,\n void *data,\n size_t *size);\n~~~\n\nThe reader function used by `lua_load`. Every time `lua_load` needs another piece of the chunk, it calls the reader, passing along its `data` parameter. The reader must return a pointer to a block of memory with a new piece of the chunk and set `size` to the block size. The block must exist until the reader function is called again. To signal the end of the chunk, the reader must return `NULL` or set `size` to zero. The reader function may return pieces of any size greater than zero.\n\n--------------------------------------------------------------------------------\n\n`lua_register`\n\n[-0, +0, e]\n\n~~~\nvoid lua_register (lua_State *L, const char *name, lua_CFunction f);\n~~~\n\nSets the C function `f` as the new value of global `name`. It is defined as a macro:\n\n~~~\n\n #define lua_register(L,n,f) \\\n (lua_pushcfunction(L, f), lua_setglobal(L, n))\n\n~~~\n\n--------------------------------------------------------------------------------\n\n`lua_remove`\n\n[-1, +0, –]\n\n~~~\nvoid lua_remove (lua_State *L, int index);\n~~~\n\nRemoves the element at the given valid index, shifting down the elements above this index to fill the gap. This function cannot be called with a pseudo-index, because a pseudo-index is not an actual stack position.\n\n--------------------------------------------------------------------------------\n\n`lua_replace`\n\n[-1, +0, –]\n\n~~~\nvoid lua_replace (lua_State *L, int index);\n~~~\n\nMoves the top element into the given valid index without shifting any element (therefore replacing the value at that given index), and then pops the top element.\n\n--------------------------------------------------------------------------------\n\n`lua_resetthread`\n\n[-0, +?, –]\n\n~~~\nint lua_resetthread (lua_State *L);\n~~~\n\nResets a thread, cleaning its call stack and closing all pending to-be-closed variables. Returns a status code: `LUA_OK` for no errors in closing methods, or an error status otherwise. In case of error, leaves the error object on the top of the stack,\n\n--------------------------------------------------------------------------------\n\n`lua_resume`\n\n[-?, +?, –]\n\n~~~\nint lua_resume (lua_State *L, lua_State *from, int nargs,\n int *nresults);\n~~~\n\nStarts and resumes a coroutine in the given thread `L`.\n\nTo start a coroutine, you push the main function plus any arguments onto the empty stack of the thread. then you call `lua_resume`, with `nargs` being the number of arguments. This call returns when the coroutine suspends or finishes its execution. When it returns, `*nresults` is updated and the top of the stack contains the `*nresults` values passed to `lua_yield` or returned by the body function. `lua_resume` returns `LUA_YIELD` if the coroutine yields, `LUA_OK` if the coroutine finishes its execution without errors, or an error code in case of errors (see §4.4.1). In case of errors, the error object is on the top of the stack.\n\nTo resume a coroutine, you remove the `*nresults` yielded values from its stack, push the values to be passed as results from `yield`, and then call `lua_resume`.\n\nThe parameter `from` represents the coroutine that is resuming `L`. If there is no such coroutine, this parameter can be `NULL`.\n\n--------------------------------------------------------------------------------\n\n`lua_rotate`\n\n[-0, +0, –]\n\n~~~\nvoid lua_rotate (lua_State *L, int idx, int n);\n~~~\n\nRotates the stack elements between the valid index `idx` and the top of the stack. The elements are rotated `n` positions in the direction of the top, for a positive `n`, or `-n` positions in the direction of the bottom, for a negative `n`. The absolute value of `n` must not be greater than the size of the slice being rotated. This function cannot be called with a pseudo-index, because a pseudo-index is not an actual stack position.\n\n--------------------------------------------------------------------------------\n\n`lua_setallocf`\n\n[-0, +0, –]\n\n~~~\nvoid lua_setallocf (lua_State *L, lua_Alloc f, void *ud);\n~~~\n\nChanges the allocator function of a given state to `f` with user data `ud`.\n\n--------------------------------------------------------------------------------\n\n`lua_setfield`\n\n[-1, +0, e]\n\n~~~\nvoid lua_setfield (lua_State *L, int index, const char *k);\n~~~\n\nDoes the equivalent to `t[k] = v`, where `t` is the value at the given index and `v` is the value on the top of the stack.\n\nThis function pops the value from the stack. As in Lua, this function may trigger a metamethod for the \"newindex\" event (see §2.4).\n\n--------------------------------------------------------------------------------\n\n`lua_setglobal`\n\n[-1, +0, e]\n\n~~~\nvoid lua_setglobal (lua_State *L, const char *name);\n~~~\n\nPops a value from the stack and sets it as the new value of global `name`.\n\n--------------------------------------------------------------------------------\n\n`lua_seti`\n\n[-1, +0, e]\n\n~~~\nvoid lua_seti (lua_State *L, int index, lua_Integer n);\n~~~\n\nDoes the equivalent to `t[n] = v`, where `t` is the value at the given index and `v` is the value on the top of the stack.\n\nThis function pops the value from the stack. As in Lua, this function may trigger a metamethod for the \"newindex\" event (see §2.4).\n\n--------------------------------------------------------------------------------\n\n`lua_setiuservalue`\n\n[-1, +0, –]\n\n~~~\nint lua_setiuservalue (lua_State *L, int index, int n);\n~~~\n\nPops a value from the stack and sets it as the new `n`-th user value associated to the full userdata at the given index. Returns 0 if the userdata does not have that value.\n\n--------------------------------------------------------------------------------\n\n`lua_setmetatable`\n\n[-1, +0, –]\n\n~~~\nint lua_setmetatable (lua_State *L, int index);\n~~~\n\nPops a table or nil from the stack and sets that value as the new metatable for the value at the given index. (nil means no metatable.)\n\n(For historical reasons, this function returns an `int`, which now is always 1.)\n\n--------------------------------------------------------------------------------\n\n`lua_settable`\n\n[-2, +0, e]\n\n~~~\nvoid lua_settable (lua_State *L, int index);\n~~~\n\nDoes the equivalent to `t[k] = v`, where `t` is the value at the given index, `v` is the value on the top of the stack, and `k` is the value just below the top.\n\nThis function pops both the key and the value from the stack. As in Lua, this function may trigger a metamethod for the \"newindex\" event (see §2.4).\n\n--------------------------------------------------------------------------------\n\n`lua_settop`\n\n[-?, +?, –]\n\n~~~\nvoid lua_settop (lua_State *L, int index);\n~~~\n\nAccepts any index, or 0, and sets the stack top to this index. If the new top is greater than the old one, then the new elements are filled with nil. If `index` is 0, then all stack elements are removed.\n\n--------------------------------------------------------------------------------\n\n`lua_setwarnf`\n\n[-0, +0, –]\n\n~~~\nvoid lua_setwarnf (lua_State *L, lua_WarnFunction f, void *ud);\n~~~\n\nSets the warning function to be used by Lua to emit warnings (see `lua_WarnFunction`). The `ud` parameter sets the value `ud` passed to the warning function.\n\n--------------------------------------------------------------------------------\n\n`lua_State`\n\n~~~\ntypedef struct lua_State lua_State;\n~~~\n\nAn opaque structure that points to a thread and indirectly (through the thread) to the whole state of a Lua interpreter. The Lua library is fully reentrant: it has no global variables. All information about a state is accessible through this structure.\n\nA pointer to this structure must be passed as the first argument to every function in the library, except to `lua_newstate`, which creates a Lua state from scratch.\n\n--------------------------------------------------------------------------------\n\n`lua_status`\n\n[-0, +0, –]\n\n~~~\nint lua_status (lua_State *L);\n~~~\n\nReturns the status of the thread `L`.\n\nThe status can be `LUA_OK` for a normal thread, an error code if the thread finished the execution of a `lua_resume` with an error, or `LUA_YIELD` if the thread is suspended.\n\nYou can call functions only in threads with status `LUA_OK`. You can resume threads with status `LUA_OK` (to start a new coroutine) or `LUA_YIELD` (to resume a coroutine).\n\n--------------------------------------------------------------------------------\n\n`lua_stringtonumber`\n\n[-0, +1, –]\n\n~~~\nsize_t lua_stringtonumber (lua_State *L, const char *s);\n~~~\n\nConverts the zero-terminated string `s` to a number, pushes that number into the stack, and returns the total size of the string, that is, its length plus one. The conversion can result in an integer or a float, according to the lexical conventions of Lua (see §3.1). The string may have leading and trailing whitespaces and a sign. If the string is not a valid numeral, returns 0 and pushes nothing. (Note that the result can be used as a boolean, true if the conversion succeeds.)\n\n--------------------------------------------------------------------------------\n\n`lua_toboolean`\n\n[-0, +0, –]\n\n~~~\nint lua_toboolean (lua_State *L, int index);\n~~~\n\nConverts the Lua value at the given index to a C boolean value (0 or 1). Like all tests in Lua, `lua_toboolean` returns true for any Lua value different from false and nil; otherwise it returns false. (If you want to accept only actual boolean values, use `lua_isboolean` to test the value's type.)\n\n--------------------------------------------------------------------------------\n\n`lua_tocfunction`\n\n[-0, +0, –]\n\n~~~\nlua_CFunction lua_tocfunction (lua_State *L, int index);\n~~~\n\nConverts a value at the given index to a C function. That value must be a C function; otherwise, returns `NULL`.\n\n--------------------------------------------------------------------------------\n\n`lua_toclose`\n\n[-0, +0, v]\n\n~~~\nvoid lua_toclose (lua_State *L, int index);\n~~~\n\nMarks the given index in the stack as a to-be-closed \"variable\" (see §3.3.8). Like a to-be-closed variable in Lua, the value at that index in the stack will be closed when it goes out of scope. Here, in the context of a C function, to go out of scope means that the running function returns to Lua, there is an error, or the index is removed from the stack through `lua_settop` or `lua_pop`. An index marked as to-be-closed should not be removed from the stack by any other function in the API except `lua_settop` or `lua_pop`.\n\nThis function should not be called for an index that is equal to or below an active to-be-closed index.\n\nThis function can raise an out-of-memory error. In that case, the value in the given index is immediately closed, as if it was already marked.\n\n--------------------------------------------------------------------------------\n\n`lua_tointeger`\n\n[-0, +0, –]\n\n~~~\nlua_Integer lua_tointeger (lua_State *L, int index);\n~~~\n\nEquivalent to `lua_tointegerx` with `isnum` equal to `NULL`.\n\n--------------------------------------------------------------------------------\n\n`lua_tointegerx`\n\n[-0, +0, –]\n\n~~~\nlua_Integer lua_tointegerx (lua_State *L, int index, int *isnum);\n~~~\n\nConverts the Lua value at the given index to the signed integral type `lua_Integer`. The Lua value must be an integer, or a number or string convertible to an integer (see §3.4.3); otherwise, `lua_tointegerx` returns 0.\n\nIf `isnum` is not `NULL`, its referent is assigned a boolean value that indicates whether the operation succeeded.\n\n--------------------------------------------------------------------------------\n\n`lua_tolstring`\n\n[-0, +0, m]\n\n~~~\nconst char *lua_tolstring (lua_State *L, int index, size_t *len);\n~~~\n\nConverts the Lua value at the given index to a C string. If `len` is not `NULL`, it sets `*len` with the string length. The Lua value must be a string or a number; otherwise, the function returns `NULL`. If the value is a number, then `lua_tolstring` also changes the actual value in the stack to a string. (This change confuses `lua_next` when `lua_tolstring` is applied to keys during a table traversal.)\n\n`lua_tolstring` returns a pointer to a string inside the Lua state. This string always has a zero ('`\\0`') after its last character (as in C), but can contain other zeros in its body.\n\nBecause Lua has garbage collection, there is no guarantee that the pointer returned by `lua_tolstring` will be valid after the corresponding Lua value is removed from the stack.\n\n--------------------------------------------------------------------------------\n\n`lua_tonumber`\n\n[-0, +0, –]\n\n~~~\nlua_Number lua_tonumber (lua_State *L, int index);\n~~~\n\nEquivalent to `lua_tonumberx` with `isnum` equal to `NULL`.\n\n--------------------------------------------------------------------------------\n\n`lua_tonumberx`\n\n[-0, +0, –]\n\n~~~\nlua_Number lua_tonumberx (lua_State *L, int index, int *isnum);\n~~~\n\nConverts the Lua value at the given index to the C type `lua_Number` (see `lua_Number`). The Lua value must be a number or a string convertible to a number (see §3.4.3); otherwise, `lua_tonumberx` returns 0.\n\nIf `isnum` is not `NULL`, its referent is assigned a boolean value that indicates whether the operation succeeded.\n\n--------------------------------------------------------------------------------\n\n`lua_topointer`\n\n[-0, +0, –]\n\n~~~\nconst void *lua_topointer (lua_State *L, int index);\n~~~\n\nConverts the value at the given index to a generic C pointer (`void*`). The value can be a userdata, a table, a thread, a string, or a function; otherwise, `lua_topointer` returns `NULL`. Different objects will give different pointers. There is no way to convert the pointer back to its original value.\n\nTypically this function is used only for hashing and debug information.\n\n--------------------------------------------------------------------------------\n\n`lua_tostring`\n\n[-0, +0, m]\n\n~~~\nconst char *lua_tostring (lua_State *L, int index);\n~~~\n\nEquivalent to `lua_tolstring` with `len` equal to `NULL`.\n\n--------------------------------------------------------------------------------\n\n`lua_tothread`\n\n[-0, +0, –]\n\n~~~\nlua_State *lua_tothread (lua_State *L, int index);\n~~~\n\nConverts the value at the given index to a Lua thread (represented as `lua_State*`). This value must be a thread; otherwise, the function returns `NULL`.\n\n--------------------------------------------------------------------------------\n\n`lua_touserdata`\n\n[-0, +0, –]\n\n~~~\nvoid *lua_touserdata (lua_State *L, int index);\n~~~\n\nIf the value at the given index is a full userdata, returns its memory-block address. If the value is a light userdata, returns its value (a pointer). Otherwise, returns `NULL`.\n\n--------------------------------------------------------------------------------\n\n`lua_type`\n\n[-0, +0, –]\n\n~~~\nint lua_type (lua_State *L, int index);\n~~~\n\nReturns the type of the value in the given valid index, or `LUA_TNONE` for a non-valid but acceptable index. The types returned by `lua_type` are coded by the following constants defined in `lua.h`: `LUA_TNIL`, `LUA_TNUMBER`, `LUA_TBOOLEAN`, `LUA_TSTRING`, `LUA_TTABLE`, `LUA_TFUNCTION`, `LUA_TUSERDATA`, `LUA_TTHREAD`, and `LUA_TLIGHTUSERDATA`.\n\n--------------------------------------------------------------------------------\n\n`lua_typename`\n\n[-0, +0, –]\n\n~~~\nconst char *lua_typename (lua_State *L, int tp);\n~~~\n\nReturns the name of the type encoded by the value `tp`, which must be one the values returned by `lua_type`.\n\n--------------------------------------------------------------------------------\n\n`lua_Unsigned`\n\n~~~\ntypedef ... lua_Unsigned;\n~~~\n\nThe unsigned version of `lua_Integer`.\n\n--------------------------------------------------------------------------------\n\n`lua_upvalueindex`\n\n[-0, +0, –]\n\n~~~\nint lua_upvalueindex (int i);\n~~~\n\nReturns the pseudo-index that represents the `i`-th upvalue of the running function (see §4.2). `i` must be in the range [1,256].\n\n--------------------------------------------------------------------------------\n\n`lua_version`\n\n[-0, +0, –]\n\n~~~\nlua_Number lua_version (lua_State *L);\n~~~\n\nReturns the version number of this core.\n\n--------------------------------------------------------------------------------\n\n`lua_WarnFunction`\n\n~~~\ntypedef void (*lua_WarnFunction) (void *ud, const char *msg, int tocont);\n~~~\n\nThe type of warning functions, called by Lua to emit warnings. The first parameter is an opaque pointer set by `lua_setwarnf`. The second parameter is the warning message. The third parameter is a boolean that indicates whether the message is to be continued by the message in the next call.\n\nSee `warn` for more details about warnings.\n\n--------------------------------------------------------------------------------\n\n`lua_warning`\n\n[-0, +0, –]\n\n~~~\nvoid lua_warning (lua_State *L, const char *msg, int tocont);\n~~~\n\nEmits a warning with the given message. A message in a call with `tocont` true should be continued in another call to this function.\n\nSee `warn` for more details about warnings.\n\n--------------------------------------------------------------------------------\n\n`lua_Writer`\n\n~~~\ntypedef int (*lua_Writer) (lua_State *L,\n const void* p,\n size_t sz,\n void* ud);\n~~~\n\nThe type of the writer function used by `lua_dump`. Every time `lua_dump` produces another piece of chunk, it calls the writer, passing along the buffer to be written (`p`), its size (`sz`), and the `ud` parameter supplied to `lua_dump`.\n\nThe writer returns an error code: 0 means no errors; any other value means an error and stops `lua_dump` from calling the writer again.\n\n--------------------------------------------------------------------------------\n\n`lua_xmove`\n\n[-?, +?, –]\n\n~~~\nvoid lua_xmove (lua_State *from, lua_State *to, int n);\n~~~\n\nExchange values between different threads of the same state.\n\nThis function pops `n` values from the stack `from`, and pushes them onto the stack `to`.\n\n--------------------------------------------------------------------------------\n\n`lua_yield`\n\n[-?, +?, v]\n\n~~~\nint lua_yield (lua_State *L, int nresults);\n~~~\n\nThis function is equivalent to `lua_yieldk`, but it has no continuation (see §4.5). Therefore, when the thread resumes, it continues the function that called the function calling `lua_yield`. To avoid surprises, this function should be called only in a tail call.\n\n--------------------------------------------------------------------------------\n\n`lua_yieldk`\n\n[-?, +?, v]\n\n~~~\nint lua_yieldk (lua_State *L,\n int nresults,\n lua_KContext ctx,\n lua_KFunction k);\n~~~\n\nYields a coroutine (thread).\n\nWhen a C function calls `lua_yieldk`, the running coroutine suspends its execution, and the call to `lua_resume` that started this coroutine returns. The parameter `nresults` is the number of values from the stack that will be passed as results to `lua_resume`.\n\nWhen the coroutine is resumed again, Lua calls the given continuation function `k` to continue the execution of the C function that yielded (see §4.5). This continuation function receives the same stack from the previous function, with the `n` results removed and replaced by the arguments passed to `lua_resume`. Moreover, the continuation function receives the value `ctx` that was passed to `lua_yieldk`.\n\nUsually, this function does not return; when the coroutine eventually resumes, it continues executing the continuation function. However, there is one special case, which is when this function is called from inside a line or a count hook (see §4.7). In that case, `lua_yieldk` should be called with no continuation (probably in the form of `lua_yield`) and no results, and the hook should return immediately after the call. Lua will yield and, when the coroutine resumes again, it will continue the normal execution of the (Lua) function that triggered the hook.\n\nThis function can raise an error if it is called from a thread with a pending C call with no continuation function (what is called a C-call boundary), or it is called from a thread that is not running inside a resume (typically the main thread).","name":"_4_6","type":"manual","def":"4.6 – Functions and Types"},{"doc":"2.6 – Coroutines\n\nLua supports coroutines, also called collaborative multithreading. A coroutine in Lua represents an independent thread of execution. Unlike threads in multithread systems, however, a coroutine only suspends its execution by explicitly calling a yield function.\n\nYou create a coroutine by calling `coroutine.create`. Its sole argument is a function that is the main function of the coroutine. The `create` function only creates a new coroutine and returns a handle to it (an object of type thread); it does not start the coroutine.\n\nYou execute a coroutine by calling `coroutine.resume`. When you first call `coroutine.resume`, passing as its first argument a thread returned by `coroutine.create`, the coroutine starts its execution by calling its main function. Extra arguments passed to `coroutine.resume` are passed as arguments to that function. After the coroutine starts running, it runs until it terminates or yields.\n\nA coroutine can terminate its execution in two ways: normally, when its main function returns (explicitly or implicitly, after the last instruction); and abnormally, if there is an unprotected error. In case of normal termination, `coroutine.resume` returns true, plus any values returned by the coroutine main function. In case of errors, `coroutine.resume` returns false plus the error object. In this case, the coroutine does not unwind its stack, so that it is possible to inspect it after the error with the debug API.\n\nA coroutine yields by calling `coroutine.yield`. When a coroutine yields, the corresponding `coroutine.resume` returns immediately, even if the yield happens inside nested function calls (that is, not in the main function, but in a function directly or indirectly called by the main function). In the case of a yield, `coroutine.resume` also returns true, plus any values passed to `coroutine.yield`. The next time you resume the same coroutine, it continues its execution from the point where it yielded, with the call to `coroutine.yield` returning any extra arguments passed to `coroutine.resume`.\n\nLike `coroutine.create`, the `coroutine.wrap` function also creates a coroutine, but instead of returning the coroutine itself, it returns a function that, when called, resumes the coroutine. Any arguments passed to this function go as extra arguments to `coroutine.resume`. `coroutine.wrap` returns all the values returned by `coroutine.resume`, except the first one (the boolean error code). Unlike `coroutine.resume`, the function created by `coroutine.wrap` propagates any error to the caller. In this case, the function also closes the coroutine (see `coroutine.close`).\n\nAs an example of how coroutines work, consider the following code:\n\n~~~\n\n function foo (a)\n print(\"foo\", a)\n return coroutine.yield(2*a)\n end\n \n co = coroutine.create(function (a,b)\n print(\"co-body\", a, b)\n local r = foo(a+1)\n print(\"co-body\", r)\n local r, s = coroutine.yield(a+b, a-b)\n print(\"co-body\", r, s)\n return b, \"end\"\n end)\n \n print(\"main\", coroutine.resume(co, 1, 10))\n print(\"main\", coroutine.resume(co, \"r\"))\n print(\"main\", coroutine.resume(co, \"x\", \"y\"))\n print(\"main\", coroutine.resume(co, \"x\", \"y\"))\n\n~~~\n\nWhen you run it, it produces the following output:\n\n~~~\n\n co-body 1 10\n foo 2\n main true 4\n co-body r\n main true 11 -9\n co-body x y\n main true 10 end\n main false cannot resume dead coroutine\n\n~~~\n\nYou can also create and manipulate coroutines through the C API: see functions `lua_newthread`, `lua_resume`, and `lua_yield`.","name":"_2_6","type":"manual","def":"2.6 – Coroutines"},{"doc":"3 – The Language\n\nThis section describes the lexis, the syntax, and the semantics of Lua. In other words, this section describes which tokens are valid, how they can be combined, and what their combinations mean.\n\nLanguage constructs will be explained using the usual extended BNF notation, in which {a} means 0 or more a's, and [a] means an optional a. Non-terminals are shown like non-terminal, keywords are shown like kword, and other terminal symbols are shown like ‘=’. The complete syntax of Lua can be found in §9 at the end of this manual.","name":"_3","type":"manual","def":"3 – The Language"},{"doc":"2.5 – Garbage Collection\n\nLua performs automatic memory management. This means that you do not have to worry about allocating memory for new objects or freeing it when the objects are no longer needed. Lua manages memory automatically by running a garbage collector to collect all dead objects. All memory used by Lua is subject to automatic management: strings, tables, userdata, functions, threads, internal structures, etc.\n\nAn object is considered dead as soon as the collector can be sure the object will not be accessed again in the normal execution of the program. (\"Normal execution\" here excludes finalizers, which can resurrect dead objects (see §2.5.3), and excludes also operations using the debug library.) Note that the time when the collector can be sure that an object is dead may not coincide with the programmer's expectations. The only guarantees are that Lua will not collect an object that may still be accessed in the normal execution of the program, and it will eventually collect an object that is inaccessible from Lua. (Here, inaccessible from Lua means that neither a variable nor another live object refer to the object.) Because Lua has no knowledge about C code, it never collects objects accessible through the registry (see §4.3), which includes the global environment (see §2.2).\n\nThe garbage collector (GC) in Lua can work in two modes: incremental and generational.\n\nThe default GC mode with the default parameters are adequate for most uses. However, programs that waste a large proportion of their time allocating and freeing memory can benefit from other settings. Keep in mind that the GC behavior is non-portable both across platforms and across different Lua releases; therefore, optimal settings are also non-portable.\n\nYou can change the GC mode and parameters by calling `lua_gc` in C or `collectgarbage` in Lua. You can also use these functions to control the collector directly (e.g., to stop and restart it).","name":"_2_5","type":"manual","def":"2.5 – Garbage Collection"},{"doc":"3.5 – Visibility Rules\n\nLua is a lexically scoped language. The scope of a local variable begins at the first statement after its declaration and lasts until the last non-void statement of the innermost block that includes the declaration. Consider the following example:\n\n~~~\n\n x = 10 -- global variable\n do -- new block\n local x = x -- new 'x', with value 10\n print(x) --> 10\n x = x+1\n do -- another block\n local x = x+1 -- another 'x'\n print(x) --> 12\n end\n print(x) --> 11\n end\n print(x) --> 10 (the global one)\n\n~~~\n\nNotice that, in a declaration like `local x = x`, the new `x` being declared is not in scope yet, and so the second `x` refers to the outside variable.\n\nBecause of the lexical scoping rules, local variables can be freely accessed by functions defined inside their scope. A local variable used by an inner function is called an upvalue (or external local variable, or simply external variable) inside the inner function.\n\nNotice that each execution of a local statement defines new local variables. Consider the following example:\n\n~~~\n\n a = {}\n local x = 20\n for i = 1, 10 do\n local y = 0\n a[i] = function () y = y + 1; return x + y end\n end\n\n~~~\n\nThe loop creates ten closures (that is, ten instances of the anonymous function). Each of these closures uses a different `y` variable, while all of them share the same `x`.","name":"_3_5","type":"manual","def":"3.5 – Visibility Rules"},{"doc":"6.7 – Mathematical Functions\n\nThis library provides basic mathematical functions. It provides all its functions and constants inside the table `math`. Functions with the annotation \"`integer\/float`\" give integer results for integer arguments and float results for non-integer arguments. The rounding functions `math.ceil`, `math.floor`, and `math.modf` return an integer when the result fits in the range of an integer, or a float otherwise.\n\n--------------------------------------------------------------------------------\n\n`math.abs (x)`\n\nReturns the maximum value between `x` and `-x`. (integer\/float)\n\n--------------------------------------------------------------------------------\n\n`math.acos (x)`\n\nReturns the arc cosine of `x` (in radians).\n\n--------------------------------------------------------------------------------\n\n`math.asin (x)`\n\nReturns the arc sine of `x` (in radians).\n\n--------------------------------------------------------------------------------\n\n`math.atan (y [, x])`\n\nReturns the arc tangent of `y\/x` (in radians), but uses the signs of both arguments to find the quadrant of the result. It also handles correctly the case of `x` being zero.\n\nThe default value for `x` is 1, so that the call `math.atan(y)` returns the arc tangent of `y`.\n\n--------------------------------------------------------------------------------\n\n`math.ceil (x)`\n\nReturns the smallest integral value greater than or equal to `x`.\n\n--------------------------------------------------------------------------------\n\n`math.cos (x)`\n\nReturns the cosine of `x` (assumed to be in radians).\n\n--------------------------------------------------------------------------------\n\n`math.deg (x)`\n\nConverts the angle `x` from radians to degrees.\n\n--------------------------------------------------------------------------------\n\n`math.exp (x)`\n\nReturns the value ex (where `e` is the base of natural logarithms).\n\n--------------------------------------------------------------------------------\n\n`math.floor (x)`\n\nReturns the largest integral value less than or equal to `x`.\n\n--------------------------------------------------------------------------------\n\n`math.fmod (x, y)`\n\nReturns the remainder of the division of `x` by `y` that rounds the quotient towards zero. (integer\/float)\n\n--------------------------------------------------------------------------------\n\n`math.huge`\n\nThe float value `HUGE_VAL`, a value greater than any other numeric value.\n\n--------------------------------------------------------------------------------\n\n`math.log (x [, base])`\n\nReturns the logarithm of `x` in the given base. The default for `base` is e (so that the function returns the natural logarithm of `x`).\n\n--------------------------------------------------------------------------------\n\n`math.max (x, ···)`\n\nReturns the argument with the maximum value, according to the Lua operator `<`.\n\n--------------------------------------------------------------------------------\n\n`math.maxinteger`\n\nAn integer with the maximum value for an integer.\n\n--------------------------------------------------------------------------------\n\n`math.min (x, ···)`\n\nReturns the argument with the minimum value, according to the Lua operator `<`.\n\n--------------------------------------------------------------------------------\n\n`math.mininteger`\n\nAn integer with the minimum value for an integer.\n\n--------------------------------------------------------------------------------\n\n`math.modf (x)`\n\nReturns the integral part of `x` and the fractional part of `x`. Its second result is always a float.\n\n--------------------------------------------------------------------------------\n\n`math.pi`\n\nThe value of π.\n\n--------------------------------------------------------------------------------\n\n`math.rad (x)`\n\nConverts the angle `x` from degrees to radians.\n\n--------------------------------------------------------------------------------\n\n`math.random ([m [, n]])`\n\nWhen called without arguments, returns a pseudo-random float with uniform distribution in the range [0,1). When called with two integers `m` and `n`, `math.random` returns a pseudo-random integer with uniform distribution in the range [m, n]. The call `math.random(n)`, for a positive `n`, is equivalent to `math.random(1,n)`. The call `math.random(0)` produces an integer with all bits (pseudo)random.\n\nThis function uses the `xoshiro256**` algorithm to produce pseudo-random 64-bit integers, which are the results of calls with argument 0. Other results (ranges and floats) are unbiased extracted from these integers.\n\nLua initializes its pseudo-random generator with the equivalent of a call to `math.randomseed` with no arguments, so that `math.random` should generate different sequences of results each time the program runs.\n\n--------------------------------------------------------------------------------\n\n`math.randomseed ([x [, y]])`\n\nWhen called with at least one argument, the integer parameters `x` and `y` are joined into a 128-bit seed that is used to reinitialize the pseudo-random generator; equal seeds produce equal sequences of numbers. The default for `y` is zero.\n\nWhen called with no arguments, Lua generates a seed with a weak attempt for randomness.\n\nThis function returns the two seed components that were effectively used, so that setting them again repeats the sequence.\n\nTo ensure a required level of randomness to the initial state (or contrarily, to have a deterministic sequence, for instance when debugging a program), you should call `math.randomseed` with explicit arguments.\n\n--------------------------------------------------------------------------------\n\n`math.sin (x)`\n\nReturns the sine of `x` (assumed to be in radians).\n\n--------------------------------------------------------------------------------\n\n`math.sqrt (x)`\n\nReturns the square root of `x`. (You can also use the expression `x^0.5` to compute this value.)\n\n--------------------------------------------------------------------------------\n\n`math.tan (x)`\n\nReturns the tangent of `x` (assumed to be in radians).\n\n--------------------------------------------------------------------------------\n\n`math.tointeger (x)`\n\nIf the value `x` is convertible to an integer, returns that integer. Otherwise, returns fail.\n\n--------------------------------------------------------------------------------\n\n`math.type (x)`\n\nReturns \"`integer`\" if `x` is an integer, \"`float`\" if it is a float, or fail if `x` is not a number.\n\n--------------------------------------------------------------------------------\n\n`math.ult (m, n)`\n\nReturns a boolean, true if and only if integer `m` is below integer `n` when they are compared as unsigned integers.","name":"_6_7","type":"manual","def":"6.7 – Mathematical Functions"},{"doc":"3.4.2 – Bitwise Operators\n\nLua supports the following bitwise operators:\n\n * `&`: bitwise AND\n * `|`: bitwise OR\n * `~`: bitwise exclusive OR\n * `>>`: right shift\n * `<<`: left shift\n * `~`: unary bitwise NOT\n\nAll bitwise operations convert its operands to integers (see §3.4.3), operate on all bits of those integers, and result in an integer.\n\nBoth right and left shifts fill the vacant bits with zeros. Negative displacements shift to the other direction; displacements with absolute values equal to or higher than the number of bits in an integer result in zero (as all bits are shifted out).","name":"_3_4_2","type":"manual","def":"3.4.2 – Bitwise Operators"},{"doc":"6.4.2 – Format Strings for Pack and Unpack\n\nThe first argument to `string.pack`, `string.packsize`, and `string.unpack` is a format string, which describes the layout of the structure being created or read.\n\nA format string is a sequence of conversion options. The conversion options are as follows:\n\n * `<`: sets little endian\n * `>`: sets big endian\n * `=`: sets native endian\n * `![n]`: sets maximum alignment to `n` (default is native alignment)\n * `b`: a signed byte (`char`)\n * `B`: an unsigned byte (`char`)\n * `h`: a signed `short` (native size)\n * `H`: an unsigned `short` (native size)\n * `l`: a signed `long` (native size)\n * `L`: an unsigned `long` (native size)\n * `j`: a `lua_Integer`\n * `J`: a `lua_Unsigned`\n * `T`: a `size_t` (native size)\n * `i[n]`: a signed `int` with `n` bytes (default is native size)\n * `I[n]`: an unsigned `int` with `n` bytes (default is native size)\n * `f`: a `float` (native size)\n * `d`: a `double` (native size)\n * `n`: a `lua_Number`\n * `cn`: a fixed-sized string with `n` bytes\n * `z`: a zero-terminated string\n * `s[n]`: a string preceded by its length coded as an unsigned integer with `n` bytes (default is a `size_t`)\n * `x`: one byte of padding\n * `Xop`: an empty item that aligns according to option `op` (which is otherwise ignored)\n * '` `': (space) ignored\n\n(A \"`[n]`\" means an optional integral numeral.) Except for padding, spaces, and configurations (options \"`xX <=>!`\"), each option corresponds to an argument in `string.pack` or a result in `string.unpack`.\n\nFor options \"`!n`\", \"`sn`\", \"`in`\", and \"`In`\", `n` can be any integer between 1 and 16. All integral options check overflows; `string.pack` checks whether the given value fits in the given size; `string.unpack` checks whether the read value fits in a Lua integer. For the unsigned options, Lua integers are treated as unsigned values too.\n\nAny format string starts as if prefixed by \"`!1=`\", that is, with maximum alignment of 1 (no alignment) and native endianness.\n\nNative endianness assumes that the whole system is either big or little endian. The packing functions will not emulate correctly the behavior of mixed-endian formats.\n\nAlignment works as follows: For each option, the format gets extra padding until the data starts at an offset that is a multiple of the minimum between the option size and the maximum alignment; this minimum must be a power of 2. Options \"`c`\" and \"`z`\" are not aligned; option \"`s`\" follows the alignment of its starting integer.\n\nAll padding is filled with zeros by `string.pack` and ignored by `string.unpack`.","name":"_6_4_2","type":"manual","def":"6.4.2 – Format Strings for Pack and Unpack"},{"doc":"6.4.1 – Patterns\n\nPatterns in Lua are described by regular strings, which are interpreted as patterns by the pattern-matching functions `string.find`, `string.gmatch`, `string.gsub`, and `string.match`. This section describes the syntax and the meaning (that is, what they match) of these strings.\n\nCharacter Class:\n\nA character class is used to represent a set of characters. The following combinations are allowed in describing a character class:\n\n * x: (where x is not one of the magic characters `^$()%.[]*+-?`) represents the character x itself.\n\n * `.`: (a dot) represents all characters.\n\n * `%a`: represents all letters.\n\n * `%c`: represents all control characters.\n\n * `%d`: represents all digits.\n\n * `%g`: represents all printable characters except space.\n\n * `%l`: represents all lowercase letters.\n\n * `%p`: represents all punctuation characters.\n\n * `%s`: represents all space characters.\n\n * `%u`: represents all uppercase letters.\n\n * `%w`: represents all alphanumeric characters.\n\n * `%x`: represents all hexadecimal digits.\n\n * `%x`: (where x is any non-alphanumeric character) represents the character x. This is the standard way to escape the magic characters. Any non-alphanumeric character (including all punctuation characters, even the non-magical) can be preceded by a '`%`' to represent itself in a pattern.\n\n * `[set]`: represents the class which is the union of all characters in set. A range of characters can be specified by separating the end characters of the range, in ascending order, with a '`-`'. All classes `%`x described above can also be used as components in set. All other characters in set represent themselves. For example, `[%w_]` (or `[_%w]`) represents all alphanumeric characters plus the underscore, `[0-7]` represents the octal digits, and `[0-7%l%-]` represents the octal digits plus the lowercase letters plus the '`-`' character.\n\nYou can put a closing square bracket in a set by positioning it as the first character in the set. You can put a hyphen in a set by positioning it as the first or the last character in the set. (You can also use an escape for both cases.)\n\nThe interaction between ranges and classes is not defined. Therefore, patterns like `[%a-z]` or `[a-%%]` have no meaning.\n\n * `[^set]`: represents the complement of set, where set is interpreted as above.\n\nFor all classes represented by single letters (`%a`, `%c`, etc.), the corresponding uppercase letter represents the complement of the class. For instance, `%S` represents all non-space characters.\n\nThe definitions of letter, space, and other character groups depend on the current locale. In particular, the class `[a-z]` may not be equivalent to `%l`.\n\nPattern Item:\n\nA pattern item can be\n\n * a single character class, which matches any single character in the class;\n\n * a single character class followed by '`*`', which matches sequences of zero or more characters in the class. These repetition items will always match the longest possible sequence;\n\n * a single character class followed by '`+`', which matches sequences of one or more characters in the class. These repetition items will always match the longest possible sequence;\n\n * a single character class followed by '`-`', which also matches sequences of zero or more characters in the class. Unlike '`*`', these repetition items will always match the shortest possible sequence;\n\n * a single character class followed by '`?`', which matches zero or one occurrence of a character in the class. It always matches one occurrence if possible;\n\n * `%n`, for n between 1 and 9; such item matches a substring equal to the n-th captured string (see below);\n\n * `%bxy`, where x and y are two distinct characters; such item matches strings that start with x, end with y, and where the x and y are balanced. This means that, if one reads the string from left to right, counting +1 for an x and -1 for a y, the ending y is the first y where the count reaches 0. For instance, the item `%b()` matches expressions with balanced parentheses.\n\n * `%f[set]`, a frontier pattern; such item matches an empty string at any position such that the next character belongs to set and the previous character does not belong to set. The set set is interpreted as previously described. The beginning and the end of the subject are handled as if they were the character '`\\0`'.\n\nPattern:\n\nA pattern is a sequence of pattern items. A caret '`^`' at the beginning of a pattern anchors the match at the beginning of the subject string. A '`$`' at the end of a pattern anchors the match at the end of the subject string. At other positions, '`^`' and '`$`' have no special meaning and represent themselves.\n\nCaptures:\n\nA pattern can contain sub-patterns enclosed in parentheses; they describe captures. When a match succeeds, the substrings of the subject string that match captures are stored (captured) for future use. Captures are numbered according to their left parentheses. For instance, in the pattern `\"(a*(.)%w(%s*))\"`, the part of the string matching `\"a*(.)%w(%s*)\"` is stored as the first capture, and therefore has number 1; the character matching \"`.`\" is captured with number 2, and the part matching \"`%s*`\" has number 3.\n\nAs a special case, the capture `()` captures the current string position (a number). For instance, if we apply the pattern `\"()aa()\"` on the string `\"flaaap\"`, there will be two captures: 3 and 5.\n\nMultiple matches:\n\nThe function `string.gsub` and the iterator `string.gmatch` match multiple occurrences of the given pattern in the subject. For these functions, a new match is considered valid only if it ends at least one byte after the end of the previous match. In other words, the pattern machine never accepts the empty string as a match immediately after another match. As an example, consider the results of the following code:\n\n~~~\n\n > string.gsub(\"abc\", \"()a*()\", print);\n --> 1 2\n --> 3 3\n --> 4 4\n\n~~~\n\nThe second and third results come from Lua matching an empty string after '`b`' and another one after '`c`'. Lua does not match an empty string after '`a`', because it would end at the same position of the previous match.","name":"_6_4_1","type":"manual","def":"6.4.1 – Patterns"},{"doc":"6.3 – Modules\n\nThe package library provides basic facilities for loading modules in Lua. It exports one function directly in the global environment: `require`. Everything else is exported in the table `package`.\n\n--------------------------------------------------------------------------------\n\n`require (modname)`\n\nLoads the given module. The function starts by looking into the `package.loaded` table to determine whether `modname` is already loaded. If it is, then `require` returns the value stored at `package.loaded[modname]`. (The absence of a second result in this case signals that this call did not have to load the module.) Otherwise, it tries to find a loader for the module.\n\nTo find a loader, `require` is guided by the table `package.searchers`. Each item in this table is a search function, that searches for the module in a particular way. By changing this table, we can change how `require` looks for a module. The following explanation is based on the default configuration for `package.searchers`.\n\nFirst `require` queries `package.preload[modname]`. If it has a value, this value (which must be a function) is the loader. Otherwise `require` searches for a Lua loader using the path stored in `package.path`. If that also fails, it searches for a C loader using the path stored in `package.cpath`. If that also fails, it tries an all-in-one loader (see `package.searchers`).\n\nOnce a loader is found, `require` calls the loader with two arguments: `modname` and an extra value, a loader data, also returned by the searcher. The loader data can be any value useful to the module; for the default searchers, it indicates where the loader was found. (For instance, if the loader came from a file, this extra value is the file path.) If the loader returns any non-nil value, `require` assigns the returned value to `package.loaded[modname]`. If the loader does not return a non-nil value and has not assigned any value to `package.loaded[modname]`, then `require` assigns true to this entry. In any case, `require` returns the final value of `package.loaded[modname]`. Besides that value, `require` also returns as a second result the loader data returned by the searcher, which indicates how `require` found the module.\n\nIf there is any error loading or running the module, or if it cannot find any loader for the module, then `require` raises an error.\n\n--------------------------------------------------------------------------------\n\n`package.config`\n\nA string describing some compile-time configurations for packages. This string is a sequence of lines:\n\n * The first line is the directory separator string. Default is '`\\`' for Windows and '`\/`' for all other systems.\n\n * The second line is the character that separates templates in a path. Default is '`;`'.\n\n * The third line is the string that marks the substitution points in a template. Default is '`?`'.\n\n * The fourth line is a string that, in a path in Windows, is replaced by the executable's directory. Default is '`!`'.\n\n * The fifth line is a mark to ignore all text after it when building the `luaopen_` function name. Default is '`-`'.\n\n--------------------------------------------------------------------------------\n\n`package.cpath`\n\nA string with the path used by `require` to search for a C loader.\n\nLua initializes the C path `package.cpath` in the same way it initializes the Lua path `package.path`, using the environment variable `LUA_CPATH_5_4`, or the environment variable `LUA_CPATH`, or a default path defined in `luaconf.h`.\n\n--------------------------------------------------------------------------------\n\n`package.loaded`\n\nA table used by `require` to control which modules are already loaded. When you require a module `modname` and `package.loaded[modname]` is not false, `require` simply returns the value stored there.\n\nThis variable is only a reference to the real table; assignments to this variable do not change the table used by `require`.\n\n--------------------------------------------------------------------------------\n\n`package.loadlib (libname, funcname)`\n\nDynamically links the host program with the C library `libname`.\n\nIf `funcname` is \"`*`\", then it only links with the library, making the symbols exported by the library available to other dynamically linked libraries. Otherwise, it looks for a function `funcname` inside the library and returns this function as a C function. So, `funcname` must follow the `lua_CFunction` prototype (see `lua_CFunction`).\n\nThis is a low-level function. It completely bypasses the package and module system. Unlike `require`, it does not perform any path searching and does not automatically adds extensions. `libname` must be the complete file name of the C library, including if necessary a path and an extension. `funcname` must be the exact name exported by the C library (which may depend on the C compiler and linker used).\n\nThis function is not supported by Standard C. As such, it is only available on some platforms (Windows, Linux, Mac OS X, Solaris, BSD, plus other Unix systems that support the `dlfcn` standard).\n\n--------------------------------------------------------------------------------\n\n`package.path`\n\nA string with the path used by `require` to search for a Lua loader.\n\nAt start-up, Lua initializes this variable with the value of the environment variable `LUA_PATH_5_4` or the environment variable `LUA_PATH` or with a default path defined in `luaconf.h`, if those environment variables are not defined. A \"`;;`\" in the value of the environment variable is replaced by the default path.\n\n--------------------------------------------------------------------------------\n\n`package.preload`\n\nA table to store loaders for specific modules (see `require`).\n\nThis variable is only a reference to the real table; assignments to this variable do not change the table used by `require`.\n\n--------------------------------------------------------------------------------\n\n`package.searchers`\n\nA table used by `require` to control how to find modules.\n\nEach entry in this table is a searcher function. When looking for a module, `require` calls each of these searchers in ascending order, with the module name (the argument given to `require`) as its sole argument. If the searcher finds the module, it returns another function, the module loader, plus an extra value, a loader data, that will be passed to that loader and returned as a second result by `require`. If it cannot find the module, it returns a string explaining why (or nil if it has nothing to say).\n\nLua initializes this table with four searcher functions.\n\nThe first searcher simply looks for a loader in the `package.preload` table.\n\nThe second searcher looks for a loader as a Lua library, using the path stored at `package.path`. The search is done as described in function `package.searchpath`.\n\nThe third searcher looks for a loader as a C library, using the path given by the variable `package.cpath`. Again, the search is done as described in function `package.searchpath`. For instance, if the C path is the string\n\n~~~\n\n \".\/?.so;.\/?.dll;\/usr\/local\/?\/init.so\"\n\n~~~\n\nthe searcher for module `foo` will try to open the files `.\/foo.so`, `.\/foo.dll`, and `\/usr\/local\/foo\/init.so`, in that order. Once it finds a C library, this searcher first uses a dynamic link facility to link the application with the library. Then it tries to find a C function inside the library to be used as the loader. The name of this C function is the string \"`luaopen_`\" concatenated with a copy of the module name where each dot is replaced by an underscore. Moreover, if the module name has a hyphen, its suffix after (and including) the first hyphen is removed. For instance, if the module name is `a.b.c-v2.1`, the function name will be `luaopen_a_b_c`.\n\nThe fourth searcher tries an all-in-one loader. It searches the C path for a library for the root name of the given module. For instance, when requiring `a.b.c`, it will search for a C library for `a`. If found, it looks into it for an open function for the submodule; in our example, that would be `luaopen_a_b_c`. With this facility, a package can pack several C submodules into one single library, with each submodule keeping its original open function.\n\nAll searchers except the first one (preload) return as the extra value the file path where the module was found, as returned by `package.searchpath`. The first searcher always returns the string \"`:preload:`\".\n\nSearchers should raise no errors and have no side effects in Lua. (They may have side effects in C, for instance by linking the application with a library.)\n\n--------------------------------------------------------------------------------\n\n`package.searchpath (name, path [, sep [, rep]])`\n\nSearches for the given `name` in the given `path`.\n\nA path is a string containing a sequence of templates separated by semicolons. For each template, the function replaces each interrogation mark (if any) in the template with a copy of `name` wherein all occurrences of `sep` (a dot, by default) were replaced by `rep` (the system's directory separator, by default), and then tries to open the resulting file name.\n\nFor instance, if the path is the string\n\n~~~\n\n \".\/?.lua;.\/?.lc;\/usr\/local\/?\/init.lua\"\n\n~~~\n\nthe search for the name `foo.a` will try to open the files `.\/foo\/a.lua`, `.\/foo\/a.lc`, and `\/usr\/local\/foo\/a\/init.lua`, in that order.\n\nReturns the resulting name of the first file that it can open in read mode (after closing the file), or fail plus an error message if none succeeds. (This error message lists all file names it tried to open.)","name":"_6_3","type":"manual","def":"6.3 – Modules"},{"doc":"3.3.1 – Blocks\n\nA block is a list of statements, which are executed sequentially:\n\n~~~\n\n\tblock ::= {stat}\n\n~~~\n\nLua has empty statements that allow you to separate statements with semicolons, start a block with a semicolon or write two semicolons in sequence:\n\n~~~\n\n\tstat ::= ‘;’\n\n~~~\n\nBoth function calls and assignments can start with an open parenthesis. This possibility leads to an ambiguity in Lua's grammar. Consider the following fragment:\n\n~~~\n\n a = b + c\n (print or io.write)('done')\n\n~~~\n\nThe grammar could see this fragment in two ways:\n\n~~~\n\n a = b + c(print or io.write)('done')\n \n a = b + c; (print or io.write)('done')\n\n~~~\n\nThe current parser always sees such constructions in the first way, interpreting the open parenthesis as the start of the arguments to a call. To avoid this ambiguity, it is a good practice to always precede with a semicolon statements that start with a parenthesis:\n\n~~~\n\n ;(print or io.write)('done')\n\n~~~\n\nA block can be explicitly delimited to produce a single statement:\n\n~~~\n\n\tstat ::= do block end\n\n~~~\n\nExplicit blocks are useful to control the scope of variable declarations. Explicit blocks are also sometimes used to add a return statement in the middle of another block (see §3.3.4).","name":"_3_3_1","type":"manual","def":"3.3.1 – Blocks"},{"doc":"4.4.1 – Status Codes\n\nSeveral functions that report errors in the API use the following status codes to indicate different kinds of errors or other conditions:\n\n * `LUA_OK` (0): no errors.\n\n * `LUA_ERRRUN`: a runtime error.\n\n * `LUA_ERRMEM`: memory allocation error. For such errors, Lua does not call the message handler.\n\n * `LUA_ERRERR`: error while running the message handler.\n\n * `LUA_ERRSYNTAX`: syntax error during precompilation.\n\n * `LUA_YIELD`: the thread (coroutine) yields.\n\n * `LUA_ERRFILE`: a file-related error; e.g., it cannot open or read the file.\n\nThese constants are defined in the header file `lua.h`.","name":"_4_4_1","type":"manual","def":"4.4.1 – Status Codes"},{"doc":"3.4.1 – Arithmetic Operators\n\nLua supports the following arithmetic operators:\n\n * `+`: addition\n * `-`: subtraction\n * `*`: multiplication\n * `\/`: float division\n * `\/\/`: floor division\n * `%`: modulo\n * `^`: exponentiation\n * `-`: unary minus\n\nWith the exception of exponentiation and float division, the arithmetic operators work as follows: If both operands are integers, the operation is performed over integers and the result is an integer. Otherwise, if both operands are numbers, then they are converted to floats, the operation is performed following the machine's rules for floating-point arithmetic (usually the IEEE 754 standard), and the result is a float. (The string library coerces strings to numbers in arithmetic operations; see §3.4.3 for details.)\n\nExponentiation and float division (`\/`) always convert their operands to floats and the result is always a float. Exponentiation uses the ISO C function `pow`, so that it works for non-integer exponents too.\n\nFloor division (`\/\/`) is a division that rounds the quotient towards minus infinity, resulting in the floor of the division of its operands.\n\nModulo is defined as the remainder of a division that rounds the quotient towards minus infinity (floor division).\n\nIn case of overflows in integer arithmetic, all operations wrap around.","name":"_3_4_1","type":"manual","def":"3.4.1 – Arithmetic Operators"}],"name":"lua._man","desc":"Lua 5.4 manual"},{"doc":"6.2 – Coroutine Manipulation\n\nThis library comprises the operations to manipulate coroutines, which come inside the table `coroutine`. See §2.6 for a general description of coroutines.","items":[{"doc":"`coroutine.running ()`\n\nReturns the running coroutine plus a boolean, true when the running coroutine is the main one.","name":"running","type":"builtin","def":"coroutine.running"},{"doc":"`coroutine.yield (···)`\n\nSuspends the execution of the calling coroutine. Any arguments to `yield` are passed as extra results to `resume`.","name":"yield","type":"builtin","def":"coroutine.yield"},{"doc":"`coroutine.isyieldable ([co])`\n\nReturns true when the coroutine `co` can yield. The default for `co` is the running coroutine.\n\nA coroutine is yieldable if it is not the main thread and it is not inside a non-yieldable C function.","name":"isyieldable","type":"builtin","def":"coroutine.isyieldable"},{"doc":"`coroutine.create (f)`\n\nCreates a new coroutine, with body `f`. `f` must be a function. Returns this new coroutine, an object with type `\"thread\"`.","name":"create","type":"builtin","def":"coroutine.create"},{"doc":"`coroutine.wrap (f)`\n\nCreates a new coroutine, with body `f`; `f` must be a function. Returns a function that resumes the coroutine each time it is called. Any arguments passed to this function behave as the extra arguments to `resume`. The function returns the same values returned by `resume`, except the first boolean. In case of error, the function closes the coroutine and propagates the error.","name":"wrap","type":"builtin","def":"coroutine.wrap"},{"doc":"`coroutine.status (co)`\n\nReturns the status of the coroutine `co`, as a string: `\"running\"`, if the coroutine is running (that is, it is the one that called `status`); `\"suspended\"`, if the coroutine is suspended in a call to `yield`, or if it has not started running yet; `\"normal\"` if the coroutine is active but not running (that is, it has resumed another coroutine); and `\"dead\"` if the coroutine has finished its body function, or if it has stopped with an error.","name":"status","type":"builtin","def":"coroutine.status"},{"doc":"`coroutine.close (co)`\n\nCloses coroutine `co`, that is, closes all its pending to-be-closed variables and puts the coroutine in a dead state. The given coroutine must be dead or suspended. In case of error closing some variable, returns false plus the error object; otherwise returns true.","name":"close","type":"builtin","def":"coroutine.close"},{"doc":"`coroutine.resume (co [, val1, ···])`\n\nStarts or continues the execution of coroutine `co`. The first time you resume a coroutine, it starts running its body. The values `val1`, ... are passed as the arguments to the body function. If the coroutine has yielded, `resume` restarts it; the values `val1`, ... are passed as the results from the yield.\n\nIf the coroutine runs without any errors, `resume` returns true plus any values passed to `yield` (when the coroutine yields) or any values returned by the body function (when the coroutine terminates). If there is any error, `resume` returns false plus the error message.","name":"resume","type":"builtin","def":"coroutine.resume"}],"name":"lua.coroutine","desc":"coroutine"},{"doc":"6.10 – The Debug Library\n\nThis library provides the functionality of the debug interface (§4.7) to Lua programs. You should exert care when using this library. Several of its functions violate basic assumptions about Lua code (e.g., that variables local to a function cannot be accessed from outside; that userdata metatables cannot be changed by Lua code; that Lua programs do not crash) and therefore can compromise otherwise secure code. Moreover, some functions in this library may be slow.\n\nAll functions in this library are provided inside the `debug` table. All functions that operate over a thread have an optional first argument which is the thread to operate over. The default is always the current thread.","items":[{"doc":"`debug.setcstacklimit (limit)`\n\nSets a new limit for the C stack. This limit controls how deeply nested calls can go in Lua, with the intent of avoiding a stack overflow. A limit too small restricts recursive calls pointlessly; a limit too large exposes the interpreter to stack-overflow crashes. Unfortunately, there is no way to know a priori the maximum safe limit for a platform.\n\nEach call made from Lua code counts one unit. Other operations (e.g., calls made from C to Lua or resuming a coroutine) may have a higher cost.\n\nThis function has the following restrictions:\n\n * It can only be called from the main coroutine (thread);\n * It cannot be called while handling a stack-overflow error;\n * `limit` must be less than 40000;\n * `limit` cannot be less than the amount of C stack in use.\n\nIf a call does not respect some restriction, it returns a false value. Otherwise, the call returns the old limit.","name":"setcstacklimit","type":"builtin","def":"debug.setcstacklimit"},{"doc":"`debug.setuservalue (udata, value, n)`\n\nSets the given `value` as the `n`-th user value associated to the given `udata`. `udata` must be a full userdata.\n\nReturns `udata`, or fail if the userdata does not have that value.","name":"setuservalue","type":"builtin","def":"debug.setuservalue"},{"doc":"`debug.getregistry ()`\n\nReturns the registry table (see §4.3).","name":"getregistry","type":"builtin","def":"debug.getregistry"},{"doc":"`debug.getinfo ([thread,] f [, what])`\n\nReturns a table with information about a function. You can give the function directly or you can give a number as the value of `f`, which means the function running at level `f` of the call stack of the given thread: level 0 is the current function (`getinfo` itself); level 1 is the function that called `getinfo` (except for tail calls, which do not count on the stack); and so on. If `f` is a number greater than the number of active functions, then `getinfo` returns fail.\n\nThe returned table can contain all the fields returned by `lua_getinfo`, with the string `what` describing which fields to fill in. The default for `what` is to get all information available, except the table of valid lines. If present, the option '`f`' adds a field named `func` with the function itself. If present, the option '`L`' adds a field named `activelines` with the table of valid lines.\n\nFor instance, the expression `debug.getinfo(1,\"n\").name` returns a name for the current function, if a reasonable name can be found, and the expression `debug.getinfo(print)` returns a table with all available information about the `print` function.","name":"getinfo","type":"builtin","def":"debug.getinfo"},{"doc":"`debug.upvalueid (f, n)`\n\nReturns a unique identifier (as a light userdata) for the upvalue numbered `n` from the given function.\n\nThese unique identifiers allow a program to check whether different closures share upvalues. Lua closures that share an upvalue (that is, that access a same external local variable) will return identical ids for those upvalue indices.","name":"upvalueid","type":"builtin","def":"debug.upvalueid"},{"doc":"`debug.debug ()`\n\nEnters an interactive mode with the user, running each string that the user enters. Using simple commands and other debug facilities, the user can inspect global and local variables, change their values, evaluate expressions, and so on. A line containing only the word `cont` finishes this function, so that the caller continues its execution.\n\nNote that commands for `debug.debug` are not lexically nested within any function and so have no direct access to local variables.","name":"debug","type":"builtin","def":"debug.debug"},{"doc":"`debug.gethook ([thread])`\n\nReturns the current hook settings of the thread, as three values: the current hook function, the current hook mask, and the current hook count, as set by the `debug.sethook` function.\n\nReturns fail if there is no active hook.","name":"gethook","type":"builtin","def":"debug.gethook"},{"doc":"`debug.upvaluejoin (f1, n1, f2, n2)`\n\nMake the `n1`-th upvalue of the Lua closure `f1` refer to the `n2`-th upvalue of the Lua closure `f2`.","name":"upvaluejoin","type":"builtin","def":"debug.upvaluejoin"},{"doc":"`debug.getlocal ([thread,] f, local)`\n\nThis function returns the name and the value of the local variable with index `local` of the function at level `f` of the stack. This function accesses not only explicit local variables, but also parameters and temporary values.\n\nThe first parameter or local variable has index 1, and so on, following the order that they are declared in the code, counting only the variables that are active in the current scope of the function. Compile-time constants may not appear in this listing, if they were optimized away by the compiler. Negative indices refer to vararg arguments; -1 is the first vararg argument. The function returns fail if there is no variable with the given index, and raises an error when called with a level out of range. (You can call `debug.getinfo` to check whether the level is valid.)\n\nVariable names starting with '`(`' (open parenthesis) represent variables with no known names (internal variables such as loop control variables, and variables from chunks saved without debug information).\n\nThe parameter `f` may also be a function. In that case, `getlocal` returns only the name of function parameters.","name":"getlocal","type":"builtin","def":"debug.getlocal"},{"doc":"`debug.getupvalue (f, up)`\n\nThis function returns the name and the value of the upvalue with index `up` of the function `f`. The function returns fail if there is no upvalue with the given index.\n\n(For Lua functions, upvalues are the external local variables that the function uses, and that are consequently included in its closure.)\n\nFor C functions, this function uses the empty string `\"\"` as a name for all upvalues.\n\nVariable name '`?`' (interrogation mark) represents variables with no known names (variables from chunks saved without debug information).","name":"getupvalue","type":"builtin","def":"debug.getupvalue"},{"doc":"`debug.setmetatable (value, table)`\n\nSets the metatable for the given `value` to the given `table` (which can be nil). Returns `value`.","name":"setmetatable","type":"builtin","def":"debug.setmetatable"},{"doc":"`debug.getmetatable (value)`\n\nReturns the metatable of the given `value` or nil if it does not have a metatable.","name":"getmetatable","type":"builtin","def":"debug.getmetatable"},{"doc":"`debug.setupvalue (f, up, value)`\n\nThis function assigns the value `value` to the upvalue with index `up` of the function `f`. The function returns fail if there is no upvalue with the given index. Otherwise, it returns the name of the upvalue.\n\nSee `debug.getupvalue` for more information about upvalues.","name":"setupvalue","type":"builtin","def":"debug.setupvalue"},{"doc":"`debug.traceback ([thread,] [message [, level]])`\n\nIf `message` is present but is neither a string nor nil, this function returns `message` without further processing. Otherwise, it returns a string with a traceback of the call stack. The optional `message` string is appended at the beginning of the traceback. An optional `level` number tells at which level to start the traceback (default is 1, the function calling `traceback`).","name":"traceback","type":"builtin","def":"debug.traceback"},{"doc":"`debug.getuservalue (u, n)`\n\nReturns the `n`-th user value associated to the userdata `u` plus a boolean, false if the userdata does not have that value.","name":"getuservalue","type":"builtin","def":"debug.getuservalue"},{"doc":"`debug.setlocal ([thread,] level, local, value)`\n\nThis function assigns the value `value` to the local variable with index `local` of the function at level `level` of the stack. The function returns fail if there is no local variable with the given index, and raises an error when called with a `level` out of range. (You can call `getinfo` to check whether the level is valid.) Otherwise, it returns the name of the local variable.\n\nSee `debug.getlocal` for more information about variable indices and names.","name":"setlocal","type":"builtin","def":"debug.setlocal"},{"doc":"`debug.sethook ([thread,] hook, mask [, count])`\n\nSets the given function as the debug hook. The string `mask` and the number `count` describe when the hook will be called. The string mask may have any combination of the following characters, with the given meaning:\n\n * '`c`': the hook is called every time Lua calls a function;\n * '`r`': the hook is called every time Lua returns from a function;\n * '`l`': the hook is called every time Lua enters a new line of code.\n\nMoreover, with a `count` different from zero, the hook is called also after every `count` instructions.\n\nWhen called without arguments, `debug.sethook` turns off the hook.\n\nWhen the hook is called, its first parameter is a string describing the event that has triggered its call: `\"call\"`, `\"tail call\"`, `\"return\"`, `\"line\"`, and `\"count\"`. For line events, the hook also gets the new line number as its second parameter. Inside a hook, you can call `getinfo` with level 2 to get more information about the running function. (Level 0 is the `getinfo` function, and level 1 is the hook function.)","name":"sethook","type":"builtin","def":"debug.sethook"}],"name":"lua.debug","desc":"debug"},{"doc":"","items":[{"doc":"`file:write (···)`\n\nWrites the value of each of its arguments to `file`. The arguments must be strings or numbers.\n\nIn case of success, this function returns `file`.","name":"write","type":"builtin","def":"file:write"},{"doc":"`file:read (···)`\n\nReads the file `file`, according to the given formats, which specify what to read. For each format, the function returns a string or a number with the characters read, or fail if it cannot read data with the specified format. (In this latter case, the function does not read subsequent formats.) When called without arguments, it uses a default format that reads the next line (see below).\n\nThe available formats are\n\n * \"`n`\": reads a numeral and returns it as a float or an integer, following the lexical conventions of Lua. (The numeral may have leading whitespaces and a sign.) This format always reads the longest input sequence that is a valid prefix for a numeral; if that prefix does not form a valid numeral (e.g., an empty string, \"`0x`\", or \"`3.4e-`\") or it is too long (more than 200 characters), it is discarded and the format returns fail.\n\n * \"`a`\": reads the whole file, starting at the current position. On end of file, it returns the empty string; this format never fails.\n\n * \"`l`\": reads the next line skipping the end of line, returning fail on end of file. This is the default format.\n\n * \"`L`\": reads the next line keeping the end-of-line character (if present), returning fail on end of file.\n\n * number: reads a string with up to this number of bytes, returning fail on end of file. If `number` is zero, it reads nothing and returns an empty string, or fail on end of file.\n\nThe formats \"`l`\" and \"`L`\" should be used only for text files.","name":"read","type":"builtin","def":"file:read"},{"doc":"`file:lines (···)`\n\nReturns an iterator function that, each time it is called, reads the file according to the given formats. When no format is given, uses \"`l`\" as a default. As an example, the construction\n\n~~~\n\n for c in file:lines(1) do body end\n\n~~~\n\nwill iterate over all characters of the file, starting at the current position. Unlike `io.lines`, this function does not close the file when the loop ends.","name":"lines","type":"builtin","def":"file:lines"},{"doc":"`file:setvbuf (mode [, size])`\n\nSets the buffering mode for a file. There are three available modes:\n\n * \"`no`\": no buffering.\n * \"`full`\": full buffering.\n * \"`line`\": line buffering.\n\nFor the last two cases, `size` is a hint for the size of the buffer, in bytes. The default is an appropriate size.\n\nThe specific behavior of each mode is non portable; check the underlying ISO C function `setvbuf` in your platform for more details.","name":"setvbuf","type":"builtin","def":"file:setvbuf"},{"doc":"`file:flush ()`\n\nSaves any written data to `file`.","name":"flush","type":"builtin","def":"file:flush"},{"doc":"`file:close ()`\n\nCloses `file`. Note that files are automatically closed when their handles are garbage collected, but that takes an unpredictable amount of time to happen.\n\nWhen closing a file handle created with `io.popen`, `file:close` returns the same values returned by `os.execute`.","name":"close","type":"builtin","def":"file:close"},{"doc":"`file:seek ([whence [, offset]])`\n\nSets and gets the file position, measured from the beginning of the file, to the position given by `offset` plus a base specified by the string `whence`, as follows:\n\n * \"`set`\": base is position 0 (beginning of the file);\n * \"`cur`\": base is current position;\n * \"`end`\": base is end of file;\n\nIn case of success, `seek` returns the final file position, measured in bytes from the beginning of the file. If `seek` fails, it returns fail, plus a string describing the error.\n\nThe default value for `whence` is `\"cur\"`, and for `offset` is 0. Therefore, the call `file:seek()` returns the current file position, without changing it; the call `file:seek(\"set\")` sets the position to the beginning of the file (and returns 0); and the call `file:seek(\"end\")` sets the position to the end of the file, and returns its size.","name":"seek","type":"builtin","def":"file:seek"}],"name":"lua.file","desc":"file"},{"doc":"6.8 – Input and Output Facilities\n\nThe I\/O library provides two different styles for file manipulation. The first one uses implicit file handles; that is, there are operations to set a default input file and a default output file, and all input\/output operations are done over these default files. The second style uses explicit file handles.\n\nWhen using implicit file handles, all operations are supplied by table `io`. When using explicit file handles, the operation `io.open` returns a file handle and then all operations are supplied as methods of the file handle.\n\nThe metatable for file handles provides metamethods for `__gc` and `__close` that try to close the file when called.\n\nThe table `io` also provides three predefined file handles with their usual meanings from C: `io.stdin`, `io.stdout`, and `io.stderr`. The I\/O library never closes these files.\n\nUnless otherwise stated, all I\/O functions return fail on failure, plus an error message as a second result and a system-dependent error code as a third result, and some non-false value on success. On non-POSIX systems, the computation of the error message and error code in case of errors may be not thread safe, because they rely on the global C variable `errno`.","items":[{"doc":"`io.read (···)`\n\nEquivalent to `io.input():read(···)`.","name":"read","type":"builtin","def":"io.read"},{"doc":"`io.input ([file])`\n\nWhen called with a file name, it opens the named file (in text mode), and sets its handle as the default input file. When called with a file handle, it simply sets this file handle as the default input file. When called without arguments, it returns the current default input file.\n\nIn case of errors this function raises the error, instead of returning an error code.","name":"input","type":"builtin","def":"io.input"},{"doc":"`io.lines ([filename, ···])`\n\nOpens the given file name in read mode and returns an iterator function that works like `file:lines(···)` over the opened file. When the iterator function fails to read any value, it automatically closes the file. Besides the iterator function, `io.lines` returns three other values: two nil values as placeholders, plus the created file handle. Therefore, when used in a generic for loop, the file is closed also if the loop is interrupted by an error or a break.\n\nThe call `io.lines()` (with no file name) is equivalent to `io.input():lines(\"l\")`; that is, it iterates over the lines of the default input file. In this case, the iterator does not close the file when the loop ends.\n\nIn case of errors opening the file, this function raises the error, instead of returning an error code.","name":"lines","type":"builtin","def":"io.lines"},{"doc":"`io.write (···)`\n\nEquivalent to `io.output():write(···)`.","name":"write","type":"builtin","def":"io.write"},{"doc":"`io.close ([file])`\n\nEquivalent to `file:close()`. Without a `file`, closes the default output file.","name":"close","type":"builtin","def":"io.close"},{"doc":"`io.type (obj)`\n\nChecks whether `obj` is a valid file handle. Returns the string `\"file\"` if `obj` is an open file handle, `\"closed file\"` if `obj` is a closed file handle, or fail if `obj` is not a file handle.","name":"type","type":"builtin","def":"io.type"},{"doc":"`io.output ([file])`\n\nSimilar to `io.input`, but operates over the default output file.","name":"output","type":"builtin","def":"io.output"},{"doc":"`io.tmpfile ()`\n\nIn case of success, returns a handle for a temporary file. This file is opened in update mode and it is automatically removed when the program ends.","name":"tmpfile","type":"builtin","def":"io.tmpfile"},{"doc":"`io.open (filename [, mode])`\n\nThis function opens a file, in the mode specified in the string `mode`. In case of success, it returns a new file handle.\n\nThe `mode` string can be any of the following:\n\n * \"`r`\": read mode (the default);\n * \"`w`\": write mode;\n * \"`a`\": append mode;\n * \"`r+`\": update mode, all previous data is preserved;\n * \"`w+`\": update mode, all previous data is erased;\n * \"`a+`\": append update mode, previous data is preserved,\n writing is only allowed at the end of file.\n\nThe `mode` string can also have a '`b`' at the end, which is needed in some systems to open the file in binary mode.","name":"open","type":"builtin","def":"io.open"},{"doc":"`io.flush ()`\n\nEquivalent to `io.output():flush()`.","name":"flush","type":"builtin","def":"io.flush"},{"doc":"`io.popen (prog [, mode])`\n\nThis function is system dependent and is not available on all platforms.\n\nStarts the program `prog` in a separated process and returns a file handle that you can use to read data from this program (if `mode` is `\"r\"`, the default) or to write data to this program (if `mode` is `\"w\"`).","name":"popen","type":"builtin","def":"io.popen"}],"name":"lua.io","desc":"io"},{"doc":"6.7 – Mathematical Functions\n\nThis library provides basic mathematical functions. It provides all its functions and constants inside the table `math`. Functions with the annotation \"`integer\/float`\" give integer results for integer arguments and float results for non-integer arguments. The rounding functions `math.ceil`, `math.floor`, and `math.modf` return an integer when the result fits in the range of an integer, or a float otherwise.","items":[{"doc":"`math.log (x [, base])`\n\nReturns the logarithm of `x` in the given base. The default for `base` is e (so that the function returns the natural logarithm of `x`).","name":"log","type":"builtin","def":"math.log"},{"doc":"`math.mininteger`\n\nAn integer with the minimum value for an integer.","name":"mininteger","type":"builtin","def":"math.mininteger"},{"doc":"`math.fmod (x, y)`\n\nReturns the remainder of the division of `x` by `y` that rounds the quotient towards zero. (integer\/float)","name":"fmod","type":"builtin","def":"math.fmod"},{"doc":"`math.sin (x)`\n\nReturns the sine of `x` (assumed to be in radians).","name":"sin","type":"builtin","def":"math.sin"},{"doc":"`math.abs (x)`\n\nReturns the maximum value between `x` and `-x`. (integer\/float)","name":"abs","type":"builtin","def":"math.abs"},{"doc":"`math.ceil (x)`\n\nReturns the smallest integral value greater than or equal to `x`.","name":"ceil","type":"builtin","def":"math.ceil"},{"doc":"`math.atan (y [, x])`\n\nReturns the arc tangent of `y\/x` (in radians), but uses the signs of both arguments to find the quadrant of the result. It also handles correctly the case of `x` being zero.\n\nThe default value for `x` is 1, so that the call `math.atan(y)` returns the arc tangent of `y`.","name":"atan","type":"builtin","def":"math.atan"},{"doc":"`math.tan (x)`\n\nReturns the tangent of `x` (assumed to be in radians).","name":"tan","type":"builtin","def":"math.tan"},{"doc":"`math.exp (x)`\n\nReturns the value ex (where `e` is the base of natural logarithms).","name":"exp","type":"builtin","def":"math.exp"},{"doc":"`math.floor (x)`\n\nReturns the largest integral value less than or equal to `x`.","name":"floor","type":"builtin","def":"math.floor"},{"doc":"`math.max (x, ···)`\n\nReturns the argument with the maximum value, according to the Lua operator `<`.","name":"max","type":"builtin","def":"math.max"},{"doc":"`math.maxinteger`\n\nAn integer with the maximum value for an integer.","name":"maxinteger","type":"builtin","def":"math.maxinteger"},{"doc":"`math.rad (x)`\n\nConverts the angle `x` from degrees to radians.","name":"rad","type":"builtin","def":"math.rad"},{"doc":"`math.tointeger (x)`\n\nIf the value `x` is convertible to an integer, returns that integer. Otherwise, returns fail.","name":"tointeger","type":"builtin","def":"math.tointeger"},{"doc":"`math.modf (x)`\n\nReturns the integral part of `x` and the fractional part of `x`. Its second result is always a float.","name":"modf","type":"builtin","def":"math.modf"},{"doc":"`math.min (x, ···)`\n\nReturns the argument with the minimum value, according to the Lua operator `<`.","name":"min","type":"builtin","def":"math.min"},{"doc":"`math.asin (x)`\n\nReturns the arc sine of `x` (in radians).","name":"asin","type":"builtin","def":"math.asin"},{"doc":"`math.huge`\n\nThe float value `HUGE_VAL`, a value greater than any other numeric value.","name":"huge","type":"builtin","def":"math.huge"},{"doc":"`math.acos (x)`\n\nReturns the arc cosine of `x` (in radians).","name":"acos","type":"builtin","def":"math.acos"},{"doc":"`math.pi`\n\nThe value of π.","name":"pi","type":"builtin","def":"math.pi"},{"doc":"`math.deg (x)`\n\nConverts the angle `x` from radians to degrees.","name":"deg","type":"builtin","def":"math.deg"},{"doc":"`math.cos (x)`\n\nReturns the cosine of `x` (assumed to be in radians).","name":"cos","type":"builtin","def":"math.cos"},{"doc":"`math.random ([m [, n]])`\n\nWhen called without arguments, returns a pseudo-random float with uniform distribution in the range [0,1). When called with two integers `m` and `n`, `math.random` returns a pseudo-random integer with uniform distribution in the range [m, n]. The call `math.random(n)`, for a positive `n`, is equivalent to `math.random(1,n)`. The call `math.random(0)` produces an integer with all bits (pseudo)random.\n\nThis function uses the `xoshiro256**` algorithm to produce pseudo-random 64-bit integers, which are the results of calls with argument 0. Other results (ranges and floats) are unbiased extracted from these integers.\n\nLua initializes its pseudo-random generator with the equivalent of a call to `math.randomseed` with no arguments, so that `math.random` should generate different sequences of results each time the program runs.","name":"random","type":"builtin","def":"math.random"},{"doc":"`math.randomseed ([x [, y]])`\n\nWhen called with at least one argument, the integer parameters `x` and `y` are joined into a 128-bit seed that is used to reinitialize the pseudo-random generator; equal seeds produce equal sequences of numbers. The default for `y` is zero.\n\nWhen called with no arguments, Lua generates a seed with a weak attempt for randomness.\n\nThis function returns the two seed components that were effectively used, so that setting them again repeats the sequence.\n\nTo ensure a required level of randomness to the initial state (or contrarily, to have a deterministic sequence, for instance when debugging a program), you should call `math.randomseed` with explicit arguments.","name":"randomseed","type":"builtin","def":"math.randomseed"},{"doc":"`math.sqrt (x)`\n\nReturns the square root of `x`. (You can also use the expression `x^0.5` to compute this value.)","name":"sqrt","type":"builtin","def":"math.sqrt"},{"doc":"`math.type (x)`\n\nReturns \"`integer`\" if `x` is an integer, \"`float`\" if it is a float, or fail if `x` is not a number.","name":"type","type":"builtin","def":"math.type"},{"doc":"`math.ult (m, n)`\n\nReturns a boolean, true if and only if integer `m` is below integer `n` when they are compared as unsigned integers.","name":"ult","type":"builtin","def":"math.ult"}],"name":"lua.math","desc":"math"},{"doc":"6.9 – Operating System Facilities\n\nThis library is implemented through table `os`.","items":[{"doc":"`os.getenv (varname)`\n\nReturns the value of the process environment variable `varname` or fail if the variable is not defined.","name":"getenv","type":"builtin","def":"os.getenv"},{"doc":"`os.clock ()`\n\nReturns an approximation of the amount in seconds of CPU time used by the program, as returned by the underlying ISO C function `clock`.","name":"clock","type":"builtin","def":"os.clock"},{"doc":"`os.difftime (t2, t1)`\n\nReturns the difference, in seconds, from time `t1` to time `t2` (where the times are values returned by `os.time`). In POSIX, Windows, and some other systems, this value is exactly `t2`-`t1`.","name":"difftime","type":"builtin","def":"os.difftime"},{"doc":"`os.rename (oldname, newname)`\n\nRenames the file or directory named `oldname` to `newname`. If this function fails, it returns fail, plus a string describing the error and the error code. Otherwise, it returns true.","name":"rename","type":"builtin","def":"os.rename"},{"doc":"`os.execute ([command])`\n\nThis function is equivalent to the ISO C function `system`. It passes `command` to be executed by an operating system shell. Its first result is true if the command terminated successfully, or fail otherwise. After this first result the function returns a string plus a number, as follows:\n\n * \"`exit`\": the command terminated normally; the following number is the exit status of the command.\n\n * \"`signal`\": the command was terminated by a signal; the following number is the signal that terminated the command.\n\nWhen called without a `command`, `os.execute` returns a boolean that is true if a shell is available.","name":"execute","type":"builtin","def":"os.execute"},{"doc":"`os.tmpname ()`\n\nReturns a string with a file name that can be used for a temporary file. The file must be explicitly opened before its use and explicitly removed when no longer needed.\n\nIn POSIX systems, this function also creates a file with that name, to avoid security risks. (Someone else might create the file with wrong permissions in the time between getting the name and creating the file.) You still have to open the file to use it and to remove it (even if you do not use it).\n\nWhen possible, you may prefer to use `io.tmpfile`, which automatically removes the file when the program ends.","name":"tmpname","type":"builtin","def":"os.tmpname"},{"doc":"`os.date ([format [, time]])`\n\nReturns a string or a table containing date and time, formatted according to the given string `format`.\n\nIf the `time` argument is present, this is the time to be formatted (see the `os.time` function for a description of this value). Otherwise, `date` formats the current time.\n\nIf `format` starts with '`!`', then the date is formatted in Coordinated Universal Time. After this optional character, if `format` is the string \"`*t`\", then `date` returns a table with the following fields: `year`, `month` (1–12), `day` (1–31), `hour` (0–23), `min` (0–59), `sec` (0–61, due to leap seconds), `wday` (weekday, 1–7, Sunday is 1), `yday` (day of the year, 1–366), and `isdst` (daylight saving flag, a boolean). This last field may be absent if the information is not available.\n\nIf `format` is not \"`*t`\", then `date` returns the date as a string, formatted according to the same rules as the ISO C function `strftime`.\n\nIf `format` is absent, it defaults to \"`%c`\", which gives a human-readable date and time representation using the current locale.\n\nOn non-POSIX systems, this function may be not thread safe because of its reliance on C function `gmtime` and C function `localtime`.","name":"date","type":"builtin","def":"os.date"},{"doc":"`os.time ([table])`\n\nReturns the current time when called without arguments, or a time representing the local date and time specified by the given table. This table must have fields `year`, `month`, and `day`, and may have fields `hour` (default is 12), `min` (default is 0), `sec` (default is 0), and `isdst` (default is nil). Other fields are ignored. For a description of these fields, see the `os.date` function.\n\nWhen the function is called, the values in these fields do not need to be inside their valid ranges. For instance, if `sec` is -10, it means 10 seconds before the time specified by the other fields; if `hour` is 1000, it means 1000 hours after the time specified by the other fields.\n\nThe returned value is a number, whose meaning depends on your system. In POSIX, Windows, and some other systems, this number counts the number of seconds since some given start time (the \"epoch\"). In other systems, the meaning is not specified, and the number returned by `time` can be used only as an argument to `os.date` and `os.difftime`.\n\nWhen called with a table, `os.time` also normalizes all the fields documented in the `os.date` function, so that they represent the same time as before the call but with values inside their valid ranges.","name":"time","type":"builtin","def":"os.time"},{"doc":"`os.remove (filename)`\n\nDeletes the file (or empty directory, on POSIX systems) with the given name. If this function fails, it returns fail plus a string describing the error and the error code. Otherwise, it returns true.","name":"remove","type":"builtin","def":"os.remove"},{"doc":"`os.exit ([code [, close]])`\n\nCalls the ISO C function `exit` to terminate the host program. If `code` is true, the returned status is `EXIT_SUCCESS`; if `code` is false, the returned status is `EXIT_FAILURE`; if `code` is a number, the returned status is this number. The default value for `code` is true.\n\nIf the optional second argument `close` is true, closes the Lua state before exiting.","name":"exit","type":"builtin","def":"os.exit"},{"doc":"`os.setlocale (locale [, category])`\n\nSets the current locale of the program. `locale` is a system-dependent string specifying a locale; `category` is an optional string describing which category to change: `\"all\"`, `\"collate\"`, `\"ctype\"`, `\"monetary\"`, `\"numeric\"`, or `\"time\"`; the default category is `\"all\"`. The function returns the name of the new locale, or fail if the request cannot be honored.\n\nIf `locale` is the empty string, the current locale is set to an implementation-defined native locale. If `locale` is the string \"`C`\", the current locale is set to the standard C locale.\n\nWhen called with nil as the first argument, this function only returns the name of the current locale for the given category.\n\nThis function may be not thread safe because of its reliance on C function `setlocale`.","name":"setlocale","type":"builtin","def":"os.setlocale"}],"name":"lua.os","desc":"os"},{"doc":"6.3 – Modules\n\nThe package library provides basic facilities for loading modules in Lua. It exports one function directly in the global environment: `require`. Everything else is exported in the table `package`.","items":[{"doc":"`package.searchers`\n\nA table used by `require` to control how to find modules.\n\nEach entry in this table is a searcher function. When looking for a module, `require` calls each of these searchers in ascending order, with the module name (the argument given to `require`) as its sole argument. If the searcher finds the module, it returns another function, the module loader, plus an extra value, a loader data, that will be passed to that loader and returned as a second result by `require`. If it cannot find the module, it returns a string explaining why (or nil if it has nothing to say).\n\nLua initializes this table with four searcher functions.\n\nThe first searcher simply looks for a loader in the `package.preload` table.\n\nThe second searcher looks for a loader as a Lua library, using the path stored at `package.path`. The search is done as described in function `package.searchpath`.\n\nThe third searcher looks for a loader as a C library, using the path given by the variable `package.cpath`. Again, the search is done as described in function `package.searchpath`. For instance, if the C path is the string\n\n~~~\n\n \".\/?.so;.\/?.dll;\/usr\/local\/?\/init.so\"\n\n~~~\n\nthe searcher for module `foo` will try to open the files `.\/foo.so`, `.\/foo.dll`, and `\/usr\/local\/foo\/init.so`, in that order. Once it finds a C library, this searcher first uses a dynamic link facility to link the application with the library. Then it tries to find a C function inside the library to be used as the loader. The name of this C function is the string \"`luaopen_`\" concatenated with a copy of the module name where each dot is replaced by an underscore. Moreover, if the module name has a hyphen, its suffix after (and including) the first hyphen is removed. For instance, if the module name is `a.b.c-v2.1`, the function name will be `luaopen_a_b_c`.\n\nThe fourth searcher tries an all-in-one loader. It searches the C path for a library for the root name of the given module. For instance, when requiring `a.b.c`, it will search for a C library for `a`. If found, it looks into it for an open function for the submodule; in our example, that would be `luaopen_a_b_c`. With this facility, a package can pack several C submodules into one single library, with each submodule keeping its original open function.\n\nAll searchers except the first one (preload) return as the extra value the file path where the module was found, as returned by `package.searchpath`. The first searcher always returns the string \"`:preload:`\".\n\nSearchers should raise no errors and have no side effects in Lua. (They may have side effects in C, for instance by linking the application with a library.)","name":"searchers","type":"builtin","def":"package.searchers"},{"doc":"`package.config`\n\nA string describing some compile-time configurations for packages. This string is a sequence of lines:\n\n * The first line is the directory separator string. Default is '`\\`' for Windows and '`\/`' for all other systems.\n\n * The second line is the character that separates templates in a path. Default is '`;`'.\n\n * The third line is the string that marks the substitution points in a template. Default is '`?`'.\n\n * The fourth line is a string that, in a path in Windows, is replaced by the executable's directory. Default is '`!`'.\n\n * The fifth line is a mark to ignore all text after it when building the `luaopen_` function name. Default is '`-`'.","name":"config","type":"builtin","def":"package.config"},{"doc":"`package.path`\n\nA string with the path used by `require` to search for a Lua loader.\n\nAt start-up, Lua initializes this variable with","name":"path","type":"builtin","def":"package.path"},{"doc":"`package.loaded`\n\nA table used by `require` to control which modules are already loaded. When you require a module `modname` and `package.loaded[modname]` is not false, `require` simply returns the value stored there.\n\nThis variable is only a reference to the real table; assignments to this variable do not change the table used by `require`.","name":"loaded","type":"builtin","def":"package.loaded"},{"doc":"`package.loadlib (libname, funcname)`\n\nDynamically links the host program with the C library `libname`.\n\nIf `funcname` is \"`*`\", then it only links with the library, making the symbols exported by the library available to other dynamically linked libraries. Otherwise, it looks for a function `funcname` inside the library and returns this function as a C function. So, `funcname` must follow the `lua_CFunction` prototype (see `lua_CFunction`).\n\nThis is a low-level function. It completely bypasses the package and module system. Unlike `require`, it does not perform any path searching and does not automatically adds extensions. `libname` must be the complete file name of the C library, including if necessary a path and an extension. `funcname` must be the exact name exported by the C library (which may depend on the C compiler and linker used).\n\nThis function is not supported by Standard C. As such, it is only available on some platforms (Windows, Linux, Mac OS X, Solaris, BSD, plus other Unix systems that support the `dlfcn` standard).","name":"loadlib","type":"builtin","def":"package.loadlib"},{"doc":"`package.searchpath (name, path [, sep [, rep]])`\n\nSearches for the given `name` in the given `path`.\n\nA path is a string containing a sequence of templates separated by semicolons. For each template, the function replaces each interrogation mark (if any) in the template with a copy of `name` wherein all occurrences of `sep` (a dot, by default) were replaced by `rep` (the system's directory separator, by default), and then tries to open the resulting file name.\n\nFor instance, if the path is the string\n\n~~~\n\n \".\/?.lua;.\/?.lc;\/usr\/local\/?\/init.lua\"\n\n~~~\n\nthe search for the name `foo.a` will try to open the files `.\/foo\/a.lua`, `.\/foo\/a.lc`, and `\/usr\/local\/foo\/a\/init.lua`, in that order.\n\nReturns the resulting name of the first file that it can open in read mode (after closing the file), or fail plus an error message if none succeeds. (This error message lists all file names it tried to open.)","name":"searchpath","type":"builtin","def":"package.searchpath"},{"doc":"`package.cpath`\n\nA string with the path used by `require` to search for a C loader.\n\nLua initializes the C path `package.cpath` in the same way it initializes the Lua path `package.path`,","name":"cpath","type":"builtin","def":"package.cpath"},{"doc":"`package.preload`\n\nA table to store loaders for specific modules (see `require`).\n\nThis variable is only a reference to the real table; assignments to this variable do not change the table used by `require`.","name":"preload","type":"builtin","def":"package.preload"}],"name":"lua.package","desc":"package"},{"doc":"6.4 – String Manipulation\n\nThis library provides generic functions for string manipulation, such as finding and extracting substrings, and pattern matching. When indexing a string in Lua, the first character is at position 1 (not at 0, as in C). Indices are allowed to be negative and are interpreted as indexing backwards, from the end of the string. Thus, the last character is at position -1, and so on.\n\nThe string library provides all its functions inside the table `string`. It also sets a metatable for strings where the `__index` field points to the `string` table. Therefore, you can use the string functions in object-oriented style. For instance, `string.byte(s,i)` can be written as `s:byte(i)`.\n\nThe string library assumes one-byte character encodings.","items":[{"doc":"`string.upper (s)`\n\nReceives a string and returns a copy of this string with all lowercase letters changed to uppercase. All other characters are left unchanged. The definition of what a lowercase letter is depends on the current locale.","name":"upper","type":"builtin","def":"string.upper"},{"doc":"`string.sub (s, i [, j])`\n\nReturns the substring of `s` that starts at `i` and continues until `j`; `i` and `j` can be negative. If `j` is absent, then it is assumed to be equal to -1 (which is the same as the string length). In particular, the call `string.sub(s,1,j)` returns a prefix of `s` with length `j`, and `string.sub(s, -i)` (for a positive `i`) returns a suffix of `s` with length `i`.\n\nIf, after the translation of negative indices, `i` is less than 1, it is corrected to 1. If `j` is greater than the string length, it is corrected to that length. If, after these corrections, `i` is greater than `j`, the function returns the empty string.","name":"sub","type":"builtin","def":"string.sub"},{"doc":"`string.lower (s)`\n\nReceives a string and returns a copy of this string with all uppercase letters changed to lowercase. All other characters are left unchanged. The definition of what an uppercase letter is depends on the current locale.","name":"lower","type":"builtin","def":"string.lower"},{"doc":"`string.byte (s [, i [, j]])`\n\nReturns the internal numeric codes of the characters `s[i]`, `s[i+1]`, ..., `s[j]`. The default value for `i` is 1; the default value for `j` is `i`. These indices are corrected following the same rules of function `string.sub`.\n\nNumeric codes are not necessarily portable across platforms.","name":"byte","type":"builtin","def":"string.byte"},{"doc":"`string.gsub (s, pattern, repl [, n])`\n\nReturns a copy of `s` in which all (or the first `n`, if given) occurrences of the `pattern` (see §6.4.1) have been replaced by a replacement string specified by `repl`, which can be a string, a table, or a function. `gsub` also returns, as its second value, the total number of matches that occurred. The name `gsub` comes from Global SUBstitution.\n\nIf `repl` is a string, then its value is used for replacement. The character `%` works as an escape character: any sequence in `repl` of the form `%d`, with d between 1 and 9, stands for the value of the d-th captured substring; the sequence `%0` stands for the whole match; the sequence `%%` stands for a single `%`.\n\nIf `repl` is a table, then the table is queried for every match, using the first capture as the key.\n\nIf `repl` is a function, then this function is called every time a match occurs, with all captured substrings passed as arguments, in order.\n\nIn any case, if the pattern specifies no captures, then it behaves as if the whole pattern was inside a capture.\n\nIf the value returned by the table query or by the function call is a string or a number, then it is used as the replacement string; otherwise, if it is false or nil, then there is no replacement (that is, the original match is kept in the string).\n\nHere are some examples:\n\n~~~\n\n x = string.gsub(\"hello world\", \"(%w+)\", \"%1 %1\")\n --> x=\"hello hello world world\"\n \n x = string.gsub(\"hello world\", \"%w+\", \"%0 %0\", 1)\n --> x=\"hello hello world\"\n \n x = string.gsub(\"hello world from Lua\", \"(%w+)%s*(%w+)\", \"%2 %1\")\n --> x=\"world hello Lua from\"\n \n x = string.gsub(\"home = $HOME, user = $USER\", \"%$(%w+)\", os.getenv)\n --> x=\"home = \/home\/roberto, user = roberto\"\n \n x = string.gsub(\"4+5 = $return 4+5$\", \"%$(.-)%$\", function (s)\n return load(s)()\n end)\n --> x=\"4+5 = 9\"\n \n local t = {name=\"lua\", version=\"5.4\"}\n x = string.gsub(\"$name-$version.tar.gz\", \"%$(%w+)\", t)\n --> x=\"lua-5.4.tar.gz\"\n\n~~~","name":"gsub","type":"builtin","def":"string.gsub"},{"doc":"`string.rep (s, n [, sep])`\n\nReturns a string that is the concatenation of `n` copies of the string `s` separated by the string `sep`. The default value for `sep` is the empty string (that is, no separator). Returns the empty string if `n` is not positive.\n\n(Note that it is very easy to exhaust the memory of your machine with a single call to this function.)","name":"rep","type":"builtin","def":"string.rep"},{"doc":"`string.find (s, pattern [, init [, plain]])`\n\nLooks for the first match of `pattern` (see §6.4.1) in the string `s`. If it finds a match, then `find` returns the indices of `s` where this occurrence starts and ends; otherwise, it returns fail. A third, optional numeric argument `init` specifies where to start the search; its default value is 1 and can be negative. A value of true as a fourth, optional argument `plain` turns off the pattern matching facilities, so the function does a plain \"find substring\" operation, with no characters in `pattern` being considered magic.\n\nIf the pattern has captures, then in a successful match the captured values are also returned, after the two indices.","name":"find","type":"builtin","def":"string.find"},{"doc":"`string.char (···)`\n\nReceives zero or more integers. Returns a string with length equal to the number of arguments, in which each character has the internal numeric code equal to its corresponding argument.\n\nNumeric codes are not necessarily portable across platforms.","name":"char","type":"builtin","def":"string.char"},{"doc":"`string.gmatch (s, pattern [, init])`\n\nReturns an iterator function that, each time it is called, returns the next captures from `pattern` (see §6.4.1) over the string `s`. If `pattern` specifies no captures, then the whole match is produced in each call. A third, optional numeric argument `init` specifies where to start the search; its default value is 1 and can be negative.\n\nAs an example, the following loop will iterate over all the words from string `s`, printing one per line:\n\n~~~\n\n s = \"hello world from Lua\"\n for w in string.gmatch(s, \"%a+\") do\n print(w)\n end\n\n~~~\n\nThe next example collects all pairs `key=value` from the given string into a table:\n\n~~~\n\n t = {}\n s = \"from=world, to=Lua\"\n for k, v in string.gmatch(s, \"(%w+)=(%w+)\") do\n t[k] = v\n end\n\n~~~\n\nFor this function, a caret '`^`' at the start of a pattern does not work as an anchor, as this would prevent the iteration.","name":"gmatch","type":"builtin","def":"string.gmatch"},{"doc":"`string.packsize (fmt)`\n\nReturns the size of a string resulting from `string.pack` with the given format. The format string cannot have the variable-length options '`s`' or '`z`' (see §6.4.2).","name":"packsize","type":"builtin","def":"string.packsize"},{"doc":"`string.dump (function [, strip])`\n\nReturns a string containing a binary representation (a binary chunk) of the given function, so that a later `load` on this string returns a copy of the function (but with new upvalues). If `strip` is a true value, the binary representation may not include all debug information about the function, to save space.\n\nFunctions with upvalues have only their number of upvalues saved. When (re)loaded, those upvalues receive fresh instances. (See the `load` function for details about how these upvalues are initialized. You can use the debug library to serialize and reload the upvalues of a function in a way adequate to your needs.)","name":"dump","type":"builtin","def":"string.dump"},{"doc":"`string.unpack (fmt, s [, pos])`\n\nReturns the values packed in string `s` (see `string.pack`) according to the format string `fmt` (see §6.4.2). An optional `pos` marks where to start reading in `s` (default is 1). After the read values, this function also returns the index of the first unread byte in `s`.","name":"unpack","type":"builtin","def":"string.unpack"},{"doc":"`string.format (formatstring, ···)`\n\nReturns a formatted version of its variable number of arguments following the description given in its first argument, which must be a string. The format string follows the same rules as the ISO C function `sprintf`. The only differences are that the conversion specifiers and modifiers `*`, `h`, `L`, `l`, and `n` are not supported and that there is an extra specifier, `q`.\n\nThe specifier `q` formats booleans, nil, numbers, and strings in a way that the result is a valid constant in Lua source code. Booleans and nil are written in the obvious way (`true`, `false`, `nil`). Floats are written in hexadecimal, to preserve full precision. A string is written between double quotes, using escape sequences when necessary to ensure that it can safely be read back by the Lua interpreter. For instance, the call\n\n~~~\n\n string.format('%q', 'a string with \"quotes\" and \\n new line')\n\n~~~\n\nmay produce the string:\n\n~~~\n\n \"a string with \\\"quotes\\\" and \\\n new line\"\n\n~~~\n\nThis specifier does not support modifiers (flags, width, length).\n\nThe conversion specifiers `A`, `a`, `E`, `e`, `f`, `G`, and `g` all expect a number as argument. The specifiers `c`, `d`, `i`, `o`, `u`, `X`, and `x` expect an integer. When Lua is compiled with a C89 compiler, the specifiers `A` and `a` (hexadecimal floats) do not support modifiers.\n\nThe specifier `s` expects a string; if its argument is not a string, it is converted to one following the same rules of `tostring`. If the specifier has any modifier, the corresponding string argument should not contain embedded zeros.\n\nThe specifier `p` formats the pointer returned by `lua_topointer`. That gives a unique string identifier for tables, userdata, threads, strings, and functions. For other values (numbers, nil, booleans), this specifier results in a string representing the pointer `NULL`.","name":"format","type":"builtin","def":"string.format"},{"doc":"`string.len (s)`\n\nReceives a string and returns its length. The empty string `\"\"` has length 0. Embedded zeros are counted, so `\"a\\000bc\\000\"` has length 5.","name":"len","type":"builtin","def":"string.len"},{"doc":"`string.pack (fmt, v1, v2, ···)`\n\nReturns a binary string containing the values `v1`, `v2`, etc. serialized in binary form (packed) according to the format string `fmt` (see §6.4.2).","name":"pack","type":"builtin","def":"string.pack"},{"doc":"`string.match (s, pattern [, init])`\n\nLooks for the first match of the `pattern` (see §6.4.1) in the string `s`. If it finds one, then `match` returns the captures from the pattern; otherwise it returns fail. If `pattern` specifies no captures, then the whole match is returned. A third, optional numeric argument `init` specifies where to start the search; its default value is 1 and can be negative.","name":"match","type":"builtin","def":"string.match"},{"doc":"`string.reverse (s)`\n\nReturns a string that is the string `s` reversed.","name":"reverse","type":"builtin","def":"string.reverse"}],"name":"lua.string","desc":"string"},{"doc":"6.6 – Table Manipulation\n\nThis library provides generic functions for table manipulation. It provides all its functions inside the table `table`.\n\nRemember that, whenever an operation needs the length of a table, all caveats about the length operator apply (see §3.4.7). All functions ignore non-numeric keys in the tables given as arguments.","items":[{"doc":"`table.remove (list [, pos])`\n\nRemoves from `list` the element at position `pos`, returning the value of the removed element. When `pos` is an integer between 1 and `#list`, it shifts down the elements `list[pos+1], list[pos+2], ···, list[#list]` and erases element `list[#list]`; The index `pos` can also be 0 when `#list` is 0, or `#list + 1`.\n\nThe default value for `pos` is `#list`, so that a call `table.remove(l)` removes the last element of the list `l`.","name":"remove","type":"builtin","def":"table.remove"},{"doc":"`table.concat (list [, sep [, i [, j]]])`\n\nGiven a list where all elements are strings or numbers, returns the string `list[i]..sep..list[i+1] ··· sep..list[j]`. The default value for `sep` is the empty string, the default for `i` is 1, and the default for `j` is `#list`. If `i` is greater than `j`, returns the empty string.","name":"concat","type":"builtin","def":"table.concat"},{"doc":"`table.sort (list [, comp])`\n\nSorts the list elements in a given order, in-place, from `list[1]` to `list[#list]`. If `comp` is given, then it must be a function that receives two list elements and returns true when the first element must come before the second in the final order (so that, after the sort, `i < j` implies `not comp(list[j],list[i])`). If `comp` is not given, then the standard Lua operator `<` is used instead.\n\nNote that the `comp` function must define a strict partial order over the elements in the list; that is, it must be asymmetric and transitive. Otherwise, no valid sort may be possible.\n\nThe sort algorithm is not stable: elements considered equal by the given order may have their relative positions changed by the sort.","name":"sort","type":"builtin","def":"table.sort"},{"doc":"`table.insert (list, [pos,] value)`\n\nInserts element `value` at position `pos` in `list`, shifting up the elements `list[pos], list[pos+1], ···, list[#list]`. The default value for `pos` is `#list+1`, so that a call `table.insert(t,x)` inserts `x` at the end of the list `t`.","name":"insert","type":"builtin","def":"table.insert"},{"doc":"`table.move (a1, f, e, t [,a2])`\n\nMoves elements from the table `a1` to the table `a2`, performing the equivalent to the following multiple assignment: `a2[t],··· = a1[f],···,a1[e]`. The default for `a2` is `a1`. The destination range can overlap with the source range. The number of elements to be moved must fit in a Lua integer.\n\nReturns the destination table `a2`.","name":"move","type":"builtin","def":"table.move"},{"doc":"`table.unpack (list [, i [, j]])`\n\nReturns the elements from the given list. This function is equivalent to\n\n~~~\n\n return list[i], list[i+1], ···, list[j]\n\n~~~\n\nBy default, `i` is 1 and `j` is `#list`.","name":"unpack","type":"builtin","def":"table.unpack"},{"doc":"`table.pack (···)`\n\nReturns a new table with all arguments stored into keys 1, 2, etc. and with a field \"`n`\" with the total number of arguments. Note that the resulting table may not be a sequence, if some arguments are nil.","name":"pack","type":"builtin","def":"table.pack"}],"name":"lua.table","desc":"table"},{"doc":"6.5 – UTF-8 Support\n\nThis library provides basic support for UTF-8 encoding. It provides all its functions inside the table `utf8`. This library does not provide any support for Unicode other than the handling of the encoding. Any operation that needs the meaning of a character, such as character classification, is outside its scope.\n\nUnless stated otherwise, all functions that expect a byte position as a parameter assume that the given position is either the start of a byte sequence or one plus the length of the subject string. As in the string library, negative indices count from the end of the string.\n\nFunctions that create byte sequences accept all values up to `0x7FFFFFFF`, as defined in the original UTF-8 specification; that implies byte sequences of up to six bytes.\n\nFunctions that interpret byte sequences only accept valid sequences (well formed and not overlong). By default, they only accept byte sequences that result in valid Unicode code points, rejecting values greater than `10FFFF` and surrogates. A boolean argument `lax`, when available, lifts these checks, so that all values up to `0x7FFFFFFF` are accepted. (Not well formed and overlong sequences are still rejected.)","items":[{"doc":"`utf8.codes (s [, lax])`\n\nReturns values so that the construction\n\n~~~\n\n for p, c in utf8.codes(s) do body end\n\n~~~\n\nwill iterate over all UTF-8 characters in string `s`, with `p` being the position (in bytes) and `c` the code point of each character. It raises an error if it meets any invalid byte sequence.","name":"codes","type":"builtin","def":"utf8.codes"},{"doc":"`utf8.charpattern`\n\nThe pattern (a string, not a function) \"`[\\0-\\x7F\\xC2-\\xFD][\\x80-\\xBF]*`\" (see §6.4.1), which matches exactly one UTF-8 byte sequence, assuming that the subject is a valid UTF-8 string.","name":"charpattern","type":"builtin","def":"utf8.charpattern"},{"doc":"`utf8.codepoint (s [, i [, j [, lax]]])`\n\nReturns the code points (as integers) from all characters in `s` that start between byte position `i` and `j` (both included). The default for `i` is 1 and for `j` is `i`. It raises an error if it meets any invalid byte sequence.","name":"codepoint","type":"builtin","def":"utf8.codepoint"},{"doc":"`utf8.len (s [, i [, j [, lax]]])`\n\nReturns the number of UTF-8 characters in string `s` that start between positions `i` and `j` (both inclusive). The default for `i` is 1 and for `j` is -1. If it finds any invalid byte sequence, returns fail plus the position of the first invalid byte.","name":"len","type":"builtin","def":"utf8.len"},{"doc":"`utf8.char (···)`\n\nReceives zero or more integers, converts each one to its corresponding UTF-8 byte sequence and returns a string with the concatenation of all these sequences.","name":"char","type":"builtin","def":"utf8.char"},{"doc":"`utf8.offset (s, n [, i])`\n\nReturns the position (in bytes) where the encoding of the `n`-th character of `s` (counting from position `i`) starts. A negative `n` gets characters before position `i`. The default for `i` is 1 when `n` is non-negative and `#s + 1` otherwise, so that `utf8.offset(s, -n)` gets the offset of the `n`-th character from the end of the string. If the specified character is neither in the subject nor right after its end, the function returns fail.\n\nAs a special case, when `n` is 0 the function returns the start of the encoding of the character that contains the `i`-th byte of `s`.\n\nThis function assumes that `s` is a valid UTF-8 string.","name":"offset","type":"builtin","def":"utf8.offset"}],"name":"lua.utf8","desc":"utf8"}] |