gimp/libgimp/gimplayer_pdb.c

1272 lines
36 KiB
C

/* LIBGIMP - The GIMP Library
* Copyright (C) 1995-2003 Peter Mattis and Spencer Kimball
*
* gimplayer_pdb.c
*
* This library is free software: you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 3 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see
* <https://www.gnu.org/licenses/>.
*/
/* NOTE: This file is auto-generated by pdbgen.pl */
#include "config.h"
#include "gimp.h"
/**
* SECTION: gimplayer
* @title: gimplayer
* @short_description: Operations on a single layer.
*
* Operations on a single layer.
**/
/**
* _gimp_layer_new:
* @image_ID: The image to which to add the layer.
* @width: The layer width.
* @height: The layer height.
* @type: The layer type.
* @name: The layer name.
* @opacity: The layer opacity.
* @mode: The layer combination mode.
*
* Create a new layer.
*
* This procedure creates a new layer with the specified width, height,
* and type. Name, opacity, and mode are also supplied parameters. The
* new layer still needs to be added to the image, as this is not
* automatic. Add the new layer with the gimp_image_insert_layer()
* command. Other attributes such as layer mask modes, and offsets
* should be set with explicit procedure calls.
*
* Returns: The newly created layer.
**/
gint32
_gimp_layer_new (gint32 image_ID,
gint width,
gint height,
GimpImageType type,
const gchar *name,
gdouble opacity,
GimpLayerMode mode)
{
GimpParam *return_vals;
gint nreturn_vals;
gint32 layer_ID = -1;
return_vals = gimp_run_procedure ("gimp-layer-new",
&nreturn_vals,
GIMP_PDB_IMAGE, image_ID,
GIMP_PDB_INT32, width,
GIMP_PDB_INT32, height,
GIMP_PDB_INT32, type,
GIMP_PDB_STRING, name,
GIMP_PDB_FLOAT, opacity,
GIMP_PDB_INT32, mode,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
layer_ID = return_vals[1].data.d_layer;
gimp_destroy_params (return_vals, nreturn_vals);
return layer_ID;
}
/**
* gimp_layer_new_from_visible:
* @image_ID: The source image from where the content is copied.
* @dest_image_ID: The destination image to which to add the layer.
* @name: The layer name.
*
* Create a new layer from what is visible in an image.
*
* This procedure creates a new layer from what is visible in the given
* image. The new layer still needs to be added to the destination
* image, as this is not automatic. Add the new layer with the
* gimp_image_insert_layer() command. Other attributes such as layer
* mask modes, and offsets should be set with explicit procedure calls.
*
* Returns: The newly created layer.
*
* Since: 2.6
**/
gint32
gimp_layer_new_from_visible (gint32 image_ID,
gint32 dest_image_ID,
const gchar *name)
{
GimpParam *return_vals;
gint nreturn_vals;
gint32 layer_ID = -1;
return_vals = gimp_run_procedure ("gimp-layer-new-from-visible",
&nreturn_vals,
GIMP_PDB_IMAGE, image_ID,
GIMP_PDB_IMAGE, dest_image_ID,
GIMP_PDB_STRING, name,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
layer_ID = return_vals[1].data.d_layer;
gimp_destroy_params (return_vals, nreturn_vals);
return layer_ID;
}
/**
* gimp_layer_new_from_drawable:
* @drawable_ID: The source drawable from where the new layer is copied.
* @dest_image_ID: The destination image to which to add the layer.
*
* Create a new layer by copying an existing drawable.
*
* This procedure creates a new layer as a copy of the specified
* drawable. The new layer still needs to be added to the image, as
* this is not automatic. Add the new layer with the
* gimp_image_insert_layer() command. Other attributes such as layer
* mask modes, and offsets should be set with explicit procedure calls.
*
* Returns: The newly copied layer.
**/
gint32
gimp_layer_new_from_drawable (gint32 drawable_ID,
gint32 dest_image_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gint32 layer_copy_ID = -1;
return_vals = gimp_run_procedure ("gimp-layer-new-from-drawable",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_IMAGE, dest_image_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
layer_copy_ID = return_vals[1].data.d_layer;
gimp_destroy_params (return_vals, nreturn_vals);
return layer_copy_ID;
}
/**
* gimp_layer_group_new:
* @image_ID: The image to which to add the layer group.
*
* Create a new layer group.
*
* This procedure creates a new layer group. Attributes such as layer
* mode and opacity should be set with explicit procedure calls. Add
* the new layer group (which is a kind of layer) with the
* gimp_image_insert_layer() command.
* Other procedures useful with layer groups:
* gimp_image_reorder_item(), gimp_item_get_parent(),
* gimp_item_get_children(), gimp_item_is_group().
*
* Returns: The newly created layer group.
*
* Since: 2.8
**/
gint32
gimp_layer_group_new (gint32 image_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gint32 layer_group_ID = -1;
return_vals = gimp_run_procedure ("gimp-layer-group-new",
&nreturn_vals,
GIMP_PDB_IMAGE, image_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
layer_group_ID = return_vals[1].data.d_layer;
gimp_destroy_params (return_vals, nreturn_vals);
return layer_group_ID;
}
/**
* _gimp_layer_copy:
* @layer_ID: The layer to copy.
* @add_alpha: Add an alpha channel to the copied layer.
*
* Copy a layer.
*
* This procedure copies the specified layer and returns the copy. The
* newly copied layer is for use within the original layer's image. It
* should not be subsequently added to any other image. The copied
* layer can optionally have an added alpha channel. This is useful if
* the background layer in an image is being copied and added to the
* same image.
*
* Returns: The newly copied layer.
**/
gint32
_gimp_layer_copy (gint32 layer_ID,
gboolean add_alpha)
{
GimpParam *return_vals;
gint nreturn_vals;
gint32 layer_copy_ID = -1;
return_vals = gimp_run_procedure ("gimp-layer-copy",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, add_alpha,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
layer_copy_ID = return_vals[1].data.d_layer;
gimp_destroy_params (return_vals, nreturn_vals);
return layer_copy_ID;
}
/**
* gimp_layer_add_alpha:
* @layer_ID: The layer.
*
* Add an alpha channel to the layer if it doesn't already have one.
*
* This procedure adds an additional component to the specified layer
* if it does not already possess an alpha channel. An alpha channel
* makes it possible to clear and erase to transparency, instead of the
* background color. This transforms layers of type RGB to RGBA, GRAY
* to GRAYA, and INDEXED to INDEXEDA.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_add_alpha (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-add-alpha",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_flatten:
* @layer_ID: The layer.
*
* Remove the alpha channel from the layer if it has one.
*
* This procedure removes the alpha channel from a layer, blending all
* (partially) transparent pixels in the layer against the background
* color. This transforms layers of type RGBA to RGB, GRAYA to GRAY,
* and INDEXEDA to INDEXED.
*
* Returns: TRUE on success.
*
* Since: 2.4
**/
gboolean
gimp_layer_flatten (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-flatten",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_scale:
* @layer_ID: The layer.
* @new_width: New layer width.
* @new_height: New layer height.
* @local_origin: Use a local origin (as opposed to the image origin).
*
* Scale the layer using the default interpolation method.
*
* This procedure scales the layer so that its new width and height are
* equal to the supplied parameters. The 'local-origin' parameter
* specifies whether to scale from the center of the layer, or from the
* image origin. This operation only works if the layer has been added
* to an image. The interpolation method used can be set with
* gimp_context_set_interpolation().
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_scale (gint32 layer_ID,
gint new_width,
gint new_height,
gboolean local_origin)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-scale",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, new_width,
GIMP_PDB_INT32, new_height,
GIMP_PDB_INT32, local_origin,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_resize:
* @layer_ID: The layer.
* @new_width: New layer width.
* @new_height: New layer height.
* @offx: x offset between upper left corner of old and new layers: (old - new).
* @offy: y offset between upper left corner of old and new layers: (old - new).
*
* Resize the layer to the specified extents.
*
* This procedure resizes the layer so that its new width and height
* are equal to the supplied parameters. Offsets are also provided
* which describe the position of the previous layer's content. This
* operation only works if the layer has been added to an image.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_resize (gint32 layer_ID,
gint new_width,
gint new_height,
gint offx,
gint offy)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-resize",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, new_width,
GIMP_PDB_INT32, new_height,
GIMP_PDB_INT32, offx,
GIMP_PDB_INT32, offy,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_resize_to_image_size:
* @layer_ID: The layer to resize.
*
* Resize a layer to the image size.
*
* This procedure resizes the layer so that it's new width and height
* are equal to the width and height of its image container.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_resize_to_image_size (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-resize-to-image-size",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_set_offsets:
* @layer_ID: The layer.
* @offx: Offset in x direction.
* @offy: Offset in y direction.
*
* Set the layer offsets.
*
* This procedure sets the offsets for the specified layer. The offsets
* are relative to the image origin and can be any values. This
* operation is valid only on layers which have been added to an image.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_set_offsets (gint32 layer_ID,
gint offx,
gint offy)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-set-offsets",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, offx,
GIMP_PDB_INT32, offy,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_create_mask:
* @layer_ID: The layer to which to add the mask.
* @mask_type: The type of mask.
*
* Create a layer mask for the specified layer.
*
* This procedure creates a layer mask for the specified layer.
* Layer masks serve as an additional alpha channel for a layer.
* Different types of masks are allowed for initialisation:
* - white mask (leaves the layer fully visible);
* - black mask (gives the layer complete transparency);
* - the layer's alpha channel (either a copy, or a transfer, which
* leaves the layer fully visible, but which may be more useful than a
* white mask);
* - the current selection;
* - a grayscale copy of the layer;
* - or a copy of the active channel.
*
* The layer mask still needs to be added to the layer. This can be
* done with a call to gimp_layer_add_mask().
*
* gimp_layer_create_mask() will fail if there are no active channels
* on the image, when called with 'ADD-CHANNEL-MASK'. It will return a
* black mask when called with 'ADD-ALPHA-MASK' or
* 'ADD-ALPHA-TRANSFER-MASK' on a layer with no alpha channels, or with
* 'ADD-SELECTION-MASK' when there is no selection on the image.
*
* Returns: The newly created mask.
**/
gint32
gimp_layer_create_mask (gint32 layer_ID,
GimpAddMaskType mask_type)
{
GimpParam *return_vals;
gint nreturn_vals;
gint32 mask_ID = -1;
return_vals = gimp_run_procedure ("gimp-layer-create-mask",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, mask_type,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
mask_ID = return_vals[1].data.d_layer_mask;
gimp_destroy_params (return_vals, nreturn_vals);
return mask_ID;
}
/**
* gimp_layer_get_mask:
* @layer_ID: The layer.
*
* Get the specified layer's mask if it exists.
*
* This procedure returns the specified layer's mask, or -1 if none
* exists.
*
* Returns: The layer mask.
**/
gint32
gimp_layer_get_mask (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gint32 mask_ID = -1;
return_vals = gimp_run_procedure ("gimp-layer-get-mask",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
mask_ID = return_vals[1].data.d_layer_mask;
gimp_destroy_params (return_vals, nreturn_vals);
return mask_ID;
}
/**
* gimp_layer_from_mask:
* @mask_ID: Mask for which to return the layer.
*
* Get the specified mask's layer.
*
* This procedure returns the specified mask's layer , or -1 if none
* exists.
*
* Returns: The mask's layer.
*
* Since: 2.2
**/
gint32
gimp_layer_from_mask (gint32 mask_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gint32 layer_ID = -1;
return_vals = gimp_run_procedure ("gimp-layer-from-mask",
&nreturn_vals,
GIMP_PDB_CHANNEL, mask_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
layer_ID = return_vals[1].data.d_layer;
gimp_destroy_params (return_vals, nreturn_vals);
return layer_ID;
}
/**
* gimp_layer_add_mask:
* @layer_ID: The layer to receive the mask.
* @mask_ID: The mask to add to the layer.
*
* Add a layer mask to the specified layer.
*
* This procedure adds a layer mask to the specified layer. Layer masks
* serve as an additional alpha channel for a layer. This procedure
* will fail if a number of prerequisites aren't met. The layer cannot
* already have a layer mask. The specified mask must exist and have
* the same dimensions as the layer. The layer must have been created
* for use with the specified image and the mask must have been created
* with the procedure 'gimp-layer-create-mask'.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_add_mask (gint32 layer_ID,
gint32 mask_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-add-mask",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_CHANNEL, mask_ID,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_remove_mask:
* @layer_ID: The layer from which to remove mask.
* @mode: Removal mode.
*
* Remove the specified layer mask from the layer.
*
* This procedure removes the specified layer mask from the layer. If
* the mask doesn't exist, an error is returned.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_remove_mask (gint32 layer_ID,
GimpMaskApplyMode mode)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-remove-mask",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, mode,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_is_floating_sel:
* @layer_ID: The layer.
*
* Is the specified layer a floating selection?
*
* This procedure returns whether the layer is a floating selection.
* Floating selections are special cases of layers which are attached
* to a specific drawable.
*
* Returns: TRUE if the layer is a floating selection.
**/
gboolean
gimp_layer_is_floating_sel (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean is_floating_sel = FALSE;
return_vals = gimp_run_procedure ("gimp-layer-is-floating-sel",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
is_floating_sel = return_vals[1].data.d_int32;
gimp_destroy_params (return_vals, nreturn_vals);
return is_floating_sel;
}
/**
* gimp_layer_get_lock_alpha:
* @layer_ID: The layer.
*
* Get the lock alpha channel setting of the specified layer.
*
* This procedure returns the specified layer's lock alpha channel
* setting.
*
* Returns: The layer's lock alpha channel setting.
**/
gboolean
gimp_layer_get_lock_alpha (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean lock_alpha = FALSE;
return_vals = gimp_run_procedure ("gimp-layer-get-lock-alpha",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
lock_alpha = return_vals[1].data.d_int32;
gimp_destroy_params (return_vals, nreturn_vals);
return lock_alpha;
}
/**
* gimp_layer_set_lock_alpha:
* @layer_ID: The layer.
* @lock_alpha: The new layer's lock alpha channel setting.
*
* Set the lock alpha channel setting of the specified layer.
*
* This procedure sets the specified layer's lock alpha channel
* setting.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_set_lock_alpha (gint32 layer_ID,
gboolean lock_alpha)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-set-lock-alpha",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, lock_alpha,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_get_apply_mask:
* @layer_ID: The layer.
*
* Get the apply mask setting of the specified layer.
*
* This procedure returns the specified layer's apply mask setting. If
* the value is TRUE, then the layer mask for this layer is currently
* being composited with the layer's alpha channel.
*
* Returns: The layer's apply mask setting.
**/
gboolean
gimp_layer_get_apply_mask (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean apply_mask = FALSE;
return_vals = gimp_run_procedure ("gimp-layer-get-apply-mask",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
apply_mask = return_vals[1].data.d_int32;
gimp_destroy_params (return_vals, nreturn_vals);
return apply_mask;
}
/**
* gimp_layer_set_apply_mask:
* @layer_ID: The layer.
* @apply_mask: The new layer's apply mask setting.
*
* Set the apply mask setting of the specified layer.
*
* This procedure sets the specified layer's apply mask setting. This
* controls whether the layer's mask is currently affecting the alpha
* channel. If there is no layer mask, this function will return an
* error.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_set_apply_mask (gint32 layer_ID,
gboolean apply_mask)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-set-apply-mask",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, apply_mask,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_get_show_mask:
* @layer_ID: The layer.
*
* Get the show mask setting of the specified layer.
*
* This procedure returns the specified layer's show mask setting. This
* controls whether the layer or its mask is visible. TRUE indicates
* that the mask should be visible. If the layer has no mask, then this
* function returns an error.
*
* Returns: The layer's show mask setting.
**/
gboolean
gimp_layer_get_show_mask (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean show_mask = FALSE;
return_vals = gimp_run_procedure ("gimp-layer-get-show-mask",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
show_mask = return_vals[1].data.d_int32;
gimp_destroy_params (return_vals, nreturn_vals);
return show_mask;
}
/**
* gimp_layer_set_show_mask:
* @layer_ID: The layer.
* @show_mask: The new layer's show mask setting.
*
* Set the show mask setting of the specified layer.
*
* This procedure sets the specified layer's show mask setting. This
* controls whether the layer or its mask is visible. TRUE indicates
* that the mask should be visible. If there is no layer mask, this
* function will return an error.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_set_show_mask (gint32 layer_ID,
gboolean show_mask)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-set-show-mask",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, show_mask,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_get_edit_mask:
* @layer_ID: The layer.
*
* Get the edit mask setting of the specified layer.
*
* This procedure returns the specified layer's edit mask setting. If
* the value is TRUE, then the layer mask for this layer is currently
* active, and not the layer.
*
* Returns: The layer's edit mask setting.
**/
gboolean
gimp_layer_get_edit_mask (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean edit_mask = FALSE;
return_vals = gimp_run_procedure ("gimp-layer-get-edit-mask",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
edit_mask = return_vals[1].data.d_int32;
gimp_destroy_params (return_vals, nreturn_vals);
return edit_mask;
}
/**
* gimp_layer_set_edit_mask:
* @layer_ID: The layer.
* @edit_mask: The new layer's edit mask setting.
*
* Set the edit mask setting of the specified layer.
*
* This procedure sets the specified layer's edit mask setting. This
* controls whether the layer or it's mask is currently active for
* editing. If the specified layer has no layer mask, then this
* procedure will return an error.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_set_edit_mask (gint32 layer_ID,
gboolean edit_mask)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-set-edit-mask",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, edit_mask,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_get_opacity:
* @layer_ID: The layer.
*
* Get the opacity of the specified layer.
*
* This procedure returns the specified layer's opacity.
*
* Returns: The layer opacity.
**/
gdouble
gimp_layer_get_opacity (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gdouble opacity = 0.0;
return_vals = gimp_run_procedure ("gimp-layer-get-opacity",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
opacity = return_vals[1].data.d_float;
gimp_destroy_params (return_vals, nreturn_vals);
return opacity;
}
/**
* gimp_layer_set_opacity:
* @layer_ID: The layer.
* @opacity: The new layer opacity.
*
* Set the opacity of the specified layer.
*
* This procedure sets the specified layer's opacity.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_set_opacity (gint32 layer_ID,
gdouble opacity)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-set-opacity",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_FLOAT, opacity,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_get_mode:
* @layer_ID: The layer.
*
* Get the combination mode of the specified layer.
*
* This procedure returns the specified layer's combination mode.
*
* Returns: The layer combination mode.
**/
GimpLayerMode
gimp_layer_get_mode (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
GimpLayerMode mode = 0;
return_vals = gimp_run_procedure ("gimp-layer-get-mode",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
mode = return_vals[1].data.d_int32;
gimp_destroy_params (return_vals, nreturn_vals);
return mode;
}
/**
* gimp_layer_set_mode:
* @layer_ID: The layer.
* @mode: The new layer combination mode.
*
* Set the combination mode of the specified layer.
*
* This procedure sets the specified layer's combination mode.
*
* Returns: TRUE on success.
**/
gboolean
gimp_layer_set_mode (gint32 layer_ID,
GimpLayerMode mode)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-set-mode",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, mode,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_get_blend_space:
* @layer_ID: The layer.
*
* Get the blend space of the specified layer.
*
* This procedure returns the specified layer's blend space.
*
* Returns: The layer blend space.
*
* Since: 2.10
**/
GimpLayerColorSpace
gimp_layer_get_blend_space (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
GimpLayerColorSpace blend_space = 0;
return_vals = gimp_run_procedure ("gimp-layer-get-blend-space",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
blend_space = return_vals[1].data.d_int32;
gimp_destroy_params (return_vals, nreturn_vals);
return blend_space;
}
/**
* gimp_layer_set_blend_space:
* @layer_ID: The layer.
* @blend_space: The new layer blend space.
*
* Set the blend space of the specified layer.
*
* This procedure sets the specified layer's blend space.
*
* Returns: TRUE on success.
*
* Since: 2.10
**/
gboolean
gimp_layer_set_blend_space (gint32 layer_ID,
GimpLayerColorSpace blend_space)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-set-blend-space",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, blend_space,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_get_composite_space:
* @layer_ID: The layer.
*
* Get the composite space of the specified layer.
*
* This procedure returns the specified layer's composite space.
*
* Returns: The layer composite space.
*
* Since: 2.10
**/
GimpLayerColorSpace
gimp_layer_get_composite_space (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
GimpLayerColorSpace composite_space = 0;
return_vals = gimp_run_procedure ("gimp-layer-get-composite-space",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
composite_space = return_vals[1].data.d_int32;
gimp_destroy_params (return_vals, nreturn_vals);
return composite_space;
}
/**
* gimp_layer_set_composite_space:
* @layer_ID: The layer.
* @composite_space: The new layer composite space.
*
* Set the composite space of the specified layer.
*
* This procedure sets the specified layer's composite space.
*
* Returns: TRUE on success.
*
* Since: 2.10
**/
gboolean
gimp_layer_set_composite_space (gint32 layer_ID,
GimpLayerColorSpace composite_space)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-set-composite-space",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, composite_space,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_layer_get_composite_mode:
* @layer_ID: The layer.
*
* Get the composite mode of the specified layer.
*
* This procedure returns the specified layer's composite mode.
*
* Returns: The layer composite mode.
*
* Since: 2.10
**/
GimpLayerCompositeMode
gimp_layer_get_composite_mode (gint32 layer_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
GimpLayerCompositeMode composite_mode = 0;
return_vals = gimp_run_procedure ("gimp-layer-get-composite-mode",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_END);
if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
composite_mode = return_vals[1].data.d_int32;
gimp_destroy_params (return_vals, nreturn_vals);
return composite_mode;
}
/**
* gimp_layer_set_composite_mode:
* @layer_ID: The layer.
* @composite_mode: The new layer composite mode.
*
* Set the composite mode of the specified layer.
*
* This procedure sets the specified layer's composite mode.
*
* Returns: TRUE on success.
*
* Since: 2.10
**/
gboolean
gimp_layer_set_composite_mode (gint32 layer_ID,
GimpLayerCompositeMode composite_mode)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-layer-set-composite-mode",
&nreturn_vals,
GIMP_PDB_LAYER, layer_ID,
GIMP_PDB_INT32, composite_mode,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}