gimp/libgimp/gimpcolor_pdb.c

699 lines
22 KiB
C

/* LIBGIMP - The GIMP Library
* Copyright (C) 1995-2003 Peter Mattis and Spencer Kimball
*
* gimpcolor_pdb.c
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*/
/* NOTE: This file is auto-generated by pdbgen.pl */
#include "config.h"
#include "gimp.h"
#undef GIMP_DISABLE_DEPRECATED
#undef __GIMP_COLOR_PDB_H__
#include "gimpcolor_pdb.h"
/**
* gimp_brightness_contrast:
* @drawable_ID: The drawable.
* @brightness: Brightness adjustment.
* @contrast: Contrast adjustment.
*
* Modify brightness/contrast in the specified drawable.
*
* This procedures allows the brightness and contrast of the specified
* drawable to be modified. Both 'brightness' and 'contrast' parameters
* are defined between -127 and 127.
*
* Returns: TRUE on success.
*/
gboolean
gimp_brightness_contrast (gint32 drawable_ID,
gint brightness,
gint contrast)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-brightness-contrast",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_INT32, brightness,
GIMP_PDB_INT32, contrast,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_levels:
* @drawable_ID: The drawable.
* @channel: The channel to modify.
* @low_input: Intensity of lowest input.
* @high_input: Intensity of highest input.
* @gamma: Gamma correction factor.
* @low_output: Intensity of lowest output.
* @high_output: Intensity of highest output.
*
* Modifies intensity levels in the specified drawable.
*
* This tool allows intensity levels in the specified drawable to be
* remapped according to a set of parameters. The low/high input levels
* specify an initial mapping from the source intensities. The gamma
* value determines how intensities between the low and high input
* intensities are interpolated. A gamma value of 1.0 results in a
* linear interpolation. Higher gamma values result in more high-level
* intensities. Lower gamma values result in more low-level
* intensities. The low/high output levels constrain the final
* intensity mapping--that is, no final intensity will be lower than
* the low output level and no final intensity will be higher than the
* high output level. This tool is only valid on RGB color and
* grayscale images. It will not operate on indexed drawables.
*
* Returns: TRUE on success.
*/
gboolean
gimp_levels (gint32 drawable_ID,
GimpHistogramChannel channel,
gint low_input,
gint high_input,
gdouble gamma,
gint low_output,
gint high_output)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-levels",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_INT32, channel,
GIMP_PDB_INT32, low_input,
GIMP_PDB_INT32, high_input,
GIMP_PDB_FLOAT, gamma,
GIMP_PDB_INT32, low_output,
GIMP_PDB_INT32, high_output,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_levels_auto:
* @drawable_ID: The drawable.
*
* This procedure is deprecated! Use gimp_levels_stretch() instead.
*
* Returns: TRUE on success.
*/
gboolean
gimp_levels_auto (gint32 drawable_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-levels-auto",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_levels_stretch:
* @drawable_ID: The drawable.
*
* Automatically modifies intensity levels in the specified drawable.
*
* This procedure allows intensity levels in the specified drawable to
* be remapped according to a set of guessed parameters. It is
* equivalent to clicking the \"Auto\" button in the Levels tool. This
* procedure is only valid on RGB color and grayscale images. It will
* not operate on indexed drawables.
*
* Returns: TRUE on success.
*/
gboolean
gimp_levels_stretch (gint32 drawable_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-levels-stretch",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_posterize:
* @drawable_ID: The drawable.
* @levels: Levels of posterization.
*
* Posterize the specified drawable.
*
* This procedures reduces the number of shades allows in each
* intensity channel to the specified 'levels' parameter.
*
* Returns: TRUE on success.
*/
gboolean
gimp_posterize (gint32 drawable_ID,
gint levels)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-posterize",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_INT32, levels,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_desaturate:
* @drawable_ID: The drawable.
*
* Desaturate the contents of the specified drawable.
*
* This procedure desaturates the contents of the specified drawable.
* This procedure only works on drawables of type RGB color.
*
* Returns: TRUE on success.
*/
gboolean
gimp_desaturate (gint32 drawable_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-desaturate",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_desaturate_full:
* @drawable_ID: The drawable.
* @desaturate_mode: The formula to use to desaturate.
*
* Desaturate the contents of the specified drawable, with the
* specified formula.
*
* This procedure desaturates the contents of the specified drawable,
* with the specified formula. This procedure only works on drawables
* of type RGB color.
*
* Returns: TRUE on success.
*
* Since: GIMP 2.4
*/
gboolean
gimp_desaturate_full (gint32 drawable_ID,
GimpDesaturateMode desaturate_mode)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-desaturate-full",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_INT32, desaturate_mode,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_equalize:
* @drawable_ID: The drawable.
* @mask_only: Equalization option.
*
* Equalize the contents of the specified drawable.
*
* This procedure equalizes the contents of the specified drawable.
* Each intensity channel is equalizeed independently. The equalized
* intensity is given as inten' = (255 - inten). Indexed color
* drawables are not valid for this operation. The 'mask_only' option
* specifies whether to adjust only the area of the image within the
* selection bounds, or the entire image based on the histogram of the
* selected area. If there is no selection, the entire image is
* adjusted based on the histogram for the entire image.
*
* Returns: TRUE on success.
*/
gboolean
gimp_equalize (gint32 drawable_ID,
gboolean mask_only)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-equalize",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_INT32, mask_only,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_invert:
* @drawable_ID: The drawable.
*
* Invert the contents of the specified drawable.
*
* This procedure inverts the contents of the specified drawable. Each
* intensity channel is inverted independently. The inverted intensity
* is given as inten' = (255 - inten). Indexed color drawables are not
* valid for this operation.
*
* Returns: TRUE on success.
*/
gboolean
gimp_invert (gint32 drawable_ID)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-invert",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_curves_spline:
* @drawable_ID: The drawable.
* @channel: The channel to modify.
* @num_points: The number of values in the control point array.
* @control_pts: The spline control points: { cp1.x, cp1.y, cp2.x, cp2.y, ... }.
*
* Modifies the intensity curve(s) for specified drawable.
*
* Modifies the intensity mapping for one channel in the specified
* drawable. The drawable must be either grayscale or RGB, and the
* channel can be either an intensity component, or the value. The
* 'control_pts' parameter is an array of integers which define a set
* of control points which describe a Catmull Rom spline which yields
* the final intensity curve. Use the gimp_curves_explicit() function
* to explicitly modify intensity levels.
*
* Returns: TRUE on success.
*/
gboolean
gimp_curves_spline (gint32 drawable_ID,
GimpHistogramChannel channel,
gint num_points,
const guint8 *control_pts)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-curves-spline",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_INT32, channel,
GIMP_PDB_INT32, num_points,
GIMP_PDB_INT8ARRAY, control_pts,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_curves_explicit:
* @drawable_ID: The drawable.
* @channel: The channel to modify.
* @num_bytes: The number of bytes in the new curve (always 256).
* @curve: The explicit curve.
*
* Modifies the intensity curve(s) for specified drawable.
*
* Modifies the intensity mapping for one channel in the specified
* drawable. The drawable must be either grayscale or RGB, and the
* channel can be either an intensity component, or the value. The
* 'curve' parameter is an array of bytes which explicitly defines how
* each pixel value in the drawable will be modified. Use the
* gimp_curves_spline() function to modify intensity levels with
* Catmull Rom splines.
*
* Returns: TRUE on success.
*/
gboolean
gimp_curves_explicit (gint32 drawable_ID,
GimpHistogramChannel channel,
gint num_bytes,
const guint8 *curve)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-curves-explicit",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_INT32, channel,
GIMP_PDB_INT32, num_bytes,
GIMP_PDB_INT8ARRAY, curve,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_color_balance:
* @drawable_ID: The drawable.
* @transfer_mode: Transfer mode.
* @preserve_lum: Preserve luminosity values at each pixel.
* @cyan_red: Cyan-Red color balance.
* @magenta_green: Magenta-Green color balance.
* @yellow_blue: Yellow-Blue color balance.
*
* Modify the color balance of the specified drawable.
*
* Modify the color balance of the specified drawable. There are three
* axis which can be modified: cyan-red, magenta-green, and
* yellow-blue. Negative values increase the amount of the former,
* positive values increase the amount of the latter. Color balance can
* be controlled with the 'transfer_mode' setting, which allows
* shadows, mid-tones, and highlights in an image to be affected
* differently. The 'preserve-lum' parameter, if TRUE, ensures that the
* luminosity of each pixel remains fixed.
*
* Returns: TRUE on success.
*/
gboolean
gimp_color_balance (gint32 drawable_ID,
GimpTransferMode transfer_mode,
gboolean preserve_lum,
gdouble cyan_red,
gdouble magenta_green,
gdouble yellow_blue)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-color-balance",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_INT32, transfer_mode,
GIMP_PDB_INT32, preserve_lum,
GIMP_PDB_FLOAT, cyan_red,
GIMP_PDB_FLOAT, magenta_green,
GIMP_PDB_FLOAT, yellow_blue,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_colorize:
* @drawable_ID: The drawable.
* @hue: Hue in degrees.
* @saturation: Saturation in percent.
* @lightness: Lightness in percent.
*
* Render the drawable as a grayscale image seen through a colored
* glass.
*
* Desaturates the drawable, then tints it with the specified color.
* This tool is only valid on RGB color images. It will not operate on
* grayscale or indexed drawables.
*
* Returns: TRUE on success.
*
* Since: GIMP 2.2
*/
gboolean
gimp_colorize (gint32 drawable_ID,
gdouble hue,
gdouble saturation,
gdouble lightness)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-colorize",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_FLOAT, hue,
GIMP_PDB_FLOAT, saturation,
GIMP_PDB_FLOAT, lightness,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_histogram:
* @drawable_ID: The drawable.
* @channel: The channel to modify.
* @start_range: Start of the intensity measurement range.
* @end_range: End of the intensity measurement range.
* @mean: Mean intensity value.
* @std_dev: Standard deviation of intensity values.
* @median: Median intensity value.
* @pixels: Alpha-weighted pixel count for entire image.
* @count: Alpha-weighted pixel count for range.
* @percentile: Percentile that range falls under.
*
* Returns information on the intensity histogram for the specified
* drawable.
*
* This tool makes it possible to gather information about the
* intensity histogram of a drawable. A channel to examine is first
* specified. This can be either value, red, green, or blue, depending
* on whether the drawable is of type color or grayscale. The drawable
* may not be indexed. Second, a range of intensities are specified.
* The gimp_histogram() function returns statistics based on the pixels
* in the drawable that fall under this range of values. Mean, standard
* deviation, median, number of pixels, and percentile are all
* returned. Additionally, the total count of pixels in the image is
* returned. Counts of pixels are weighted by any associated alpha
* values and by the current selection mask. That is, pixels that lie
* outside an active selection mask will not be counted. Similarly,
* pixels with transparent alpha values will not be counted.
*
* Returns: TRUE on success.
*/
gboolean
gimp_histogram (gint32 drawable_ID,
GimpHistogramChannel channel,
gint start_range,
gint end_range,
gdouble *mean,
gdouble *std_dev,
gdouble *median,
gdouble *pixels,
gdouble *count,
gdouble *percentile)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-histogram",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_INT32, channel,
GIMP_PDB_INT32, start_range,
GIMP_PDB_INT32, end_range,
GIMP_PDB_END);
*mean = 0.0;
*std_dev = 0.0;
*median = 0.0;
*pixels = 0.0;
*count = 0.0;
*percentile = 0.0;
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
if (success)
{
*mean = return_vals[1].data.d_float;
*std_dev = return_vals[2].data.d_float;
*median = return_vals[3].data.d_float;
*pixels = return_vals[4].data.d_float;
*count = return_vals[5].data.d_float;
*percentile = return_vals[6].data.d_float;
}
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_hue_saturation:
* @drawable_ID: The drawable.
* @hue_range: Range of affected hues.
* @hue_offset: Hue offset in degrees.
* @lightness: Lightness modification.
* @saturation: Saturation modification.
*
* Modify hue, lightness, and saturation in the specified drawable.
*
* This procedures allows the hue, lightness, and saturation in the
* specified drawable to be modified. The 'hue-range' parameter
* provides the capability to limit range of affected hues.
*
* Returns: TRUE on success.
*/
gboolean
gimp_hue_saturation (gint32 drawable_ID,
GimpHueRange hue_range,
gdouble hue_offset,
gdouble lightness,
gdouble saturation)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-hue-saturation",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_INT32, hue_range,
GIMP_PDB_FLOAT, hue_offset,
GIMP_PDB_FLOAT, lightness,
GIMP_PDB_FLOAT, saturation,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}
/**
* gimp_threshold:
* @drawable_ID: The drawable.
* @low_threshold: The low threshold value.
* @high_threshold: The high threshold value.
*
* Threshold the specified drawable.
*
* This procedures generates a threshold map of the specified drawable.
* All pixels between the values of 'low_threshold' and
* 'high_threshold' are replaced with white, and all other pixels with
* black.
*
* Returns: TRUE on success.
*/
gboolean
gimp_threshold (gint32 drawable_ID,
gint low_threshold,
gint high_threshold)
{
GimpParam *return_vals;
gint nreturn_vals;
gboolean success = TRUE;
return_vals = gimp_run_procedure ("gimp-threshold",
&nreturn_vals,
GIMP_PDB_DRAWABLE, drawable_ID,
GIMP_PDB_INT32, low_threshold,
GIMP_PDB_INT32, high_threshold,
GIMP_PDB_END);
success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;
gimp_destroy_params (return_vals, nreturn_vals);
return success;
}