# traditional Chinese translation of gimp-tips. # Copyright (C) 2003 Free Software Foundation, Inc. # (partially based on Harry C.H. Chou's work) # Abel Cheung , 2003. # msgid "" msgstr "" "Project-Id-Version: gimp20-tips 1.3.22\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2003-11-05 20:52+0800\n" "PO-Revision-Date: 2003-11-05 21:06+0800\n" "Last-Translator: Abel Cheung \n" "Language-Team: Chinese (traditional) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: tips/gimp-tips.xml.in.h:1 msgid "Welcome to The GIMP !" msgstr "歡迎使用 GIMP！" #: tips/gimp-tips.xml.in.h:2 msgid "" "Alt-click on the layer mask's preview in the Layers dialog toggles " "viewing the mask directly." msgstr "" "在「圖層」對話方塊的圖層遮罩預覽圖內，按 Alt 鍵加上滑鼠按鈕會切換是" "否直接顯示遮罩。" #: tips/gimp-tips.xml.in.h:3 msgid "" "Ctrl-click on the layer mask's preview in the Layers dialog toggles " "the effect of the layer mask." msgstr "" "在「圖層」對話方塊的圖層遮罩預覽圖內，按 Ctrl 鍵加上滑鼠按鈕可切換圖" "層遮罩的效果。" #: tips/gimp-tips.xml.in.h:4 msgid "" "Ctrl-click with the Bucket Fill tool to have it use the background " "color instead of the foreground color." msgstr "" "使用「油漆桶填色」工具時，按 Ctrl 鍵加上滑鼠按鈕會令填色時使用背景顏" "色而非前景顏色。" #: tips/gimp-tips.xml.in.h:5 msgid "" "Ctrl-drag with the Rotate tool will constrain the rotation to 15 " "degree angles." msgstr "" "在旋轉工具中，按 Ctrl 鍵加上滑鼠按鈕會將旋轉角度限制" "為 15°的倍數。" #: tips/gimp-tips.xml.in.h:6 msgid "" "Shift-click on the eye icon in the Layers dialog to hide all layers " "but that one. Shift-click again to show all layers." msgstr "" "在「圖層」對話方塊的眼形圖示中，按 Shift 鍵加上滑鼠按鈕會只顯示指定" "圖層而隱藏其它圖層。再做一次則會顯示所有圖層。" #: tips/gimp-tips.xml.in.h:7 msgid "" "A Floating Selection must be anchored to a new layer or to the last active " "layer before doing other operations on the image. Click on the \"New Layer\" " "or \"Anchor Layer buttons\" in the Layers dialog, or use the menus to do the " "same." msgstr "" "對圖像進行任何操作前，浮動選擇區域必須先固定在新的圖層或是最後使用的圖層上。" "要進行以上的程序，可以在「圖層」對話方塊中選取「新增圖層」或「固定圖層」按" "鈕。另外在選單中也可以使用同樣的方法。" #: tips/gimp-tips.xml.in.h:8 msgid "" "After you enabled \"Dynamic Keyboard Shortcuts\" in the Preferences dialog, " "you can reassign shortcut keys. Do so by bringing up the menu, selecting a " "menu item, and pressing the desired key combination. If \"Save Keyboard " "Shortcuts\" is enabled, the key bindings are saved when you exit GIMP." msgstr "" "在偏好設定對話方塊中啟用「可即時更改捷徑鍵設定」後，您可以重新安排選單上的" "捷徑鍵。方法是先用滑鼠選取選單的某個項目，然後按下新的捷徑鍵組合。結束 GIMP " "時，這些按鍵組合會被儲存下來。" #: tips/gimp-tips.xml.in.h:9 msgid "" "Click and drag on a ruler to place a Guide on an image. All dragged " "selections will snap to the guides. You can remove guides by dragging them " "off the image with the Move tool." msgstr "" "在尺規上按下滑鼠左鍵並拖曳至圖像內就可以加入參考線。以後任何拖曳的選擇區域都" "會自動吸引至參考線上。如果要去除參考線，可利用「移動」工具將參考線拖曳到圖像" "範圍以外。" #: tips/gimp-tips.xml.in.h:10 msgid "" "If some of your scanned photos do not look colorful enough, you can easily " "improve their tonal range with the \"Auto\" button in the Levels tool (Layer-" ">Colors->Levels). If there are any color casts, you can correct them " "with the Curves tool (Layer->Colors->Curves)." msgstr "" "如果掃描出來的相片色彩不太鮮豔，可以使用「色階」工具（圖像→色彩→色階）中的" "「自動」按鈕來改善圖像的色彩範圍。如果色彩有任何走樣，可以利用「曲線」工具" "（圖像→色彩→曲線）來修正。" #: tips/gimp-tips.xml.in.h:11 msgid "" "If you stroke a path (Edit->Stroke Selection), the paint tools can be " "used with their current settings. You can use the Paintbrush in gradient " "mode or even the Eraser or the Smudge tool." msgstr "" "描畫路徑時（編輯→依選擇區域描邊），可以使用目前的繪畫工具和設定。您可以在漸層" "模式中使用「畫筆」，甚至「橡皮擦」或「塗污」工具也可以。" #: tips/gimp-tips.xml.in.h:12 msgid "" "If your screen is too cluttered, you can press Tab multiple times " "in an image window to hide or show the toolbox and other dialogs." msgstr "" "如果畫面過於混亂，您可以在圖像視窗中重複按下 Tab 鍵來隱藏或顯示工具" "箱及其它對話方塊。" #: tips/gimp-tips.xml.in.h:13 msgid "" "Most plug-ins work on the current layer of the current image. In some cases, " "you will have to merge all layers (Image->Flatten Image) if you want the " "plug-in to work on the whole image." msgstr "" "絕大多數的增效模組只會對圖像目前的圖層產生效用。在某些情況下，您必須先合併所" "有圖層 (圖像→圖像平面化)，增效模組才會對整幅圖像產生效用。" #: tips/gimp-tips.xml.in.h:14 msgid "" "Nearly all image operations are performed by right-clicking on the image. " "And don't worry, you can undo most mistakes..." msgstr "" "幾乎所有的圖像處理都可以在圖像上按下右邊滑鼠按鈕來進行。不需太擔心，大部份的" "錯誤都是可以復原的..." #: tips/gimp-tips.xml.in.h:15 msgid "" "Not all effects can be applied to all kinds of images. This is indicated by " "a grayed-out menu-entry. You may need to change the image mode to RGB (Image-" ">Mode->RGB), add an alpha-channel (Layers->Transparency->Add " "Alpha Channel) or flatten it (Image->Flatten Image)." msgstr "" "並非所有效果都適用於各類圖像。當某項功能無法使用時，選單的文字會以淺灰色表" "示。如果需要該種效果，可能需要將圖像的色系轉為 RGB (圖像→模式→RGB)、加入透明" "色版 (圖層→透明度→新增透明色版) 或者將它平面化 (圖像→圖像平面化)。" #: tips/gimp-tips.xml.in.h:16 msgid "" "Pressing and holding the Shift key before making a selection allows " "you to add to the current selection instead of replacing it. Using Ctrl before making a selection subtracts from the current one." msgstr "" "在選取區域之前按下 Shift 鍵，便會將新選擇的區域加到舊的區域一起而非" "代替舊的區域。使用 Ctrl 則是將舊的區域減去新的區域。" #: tips/gimp-tips.xml.in.h:17 msgid "" "The GIMP supports gzip compression on the fly. Just add .gz (or " ".bz2, if you have bzip2 installed) to the filename and your image " "will be saved compressed. Of course loading compressed images works too." msgstr "" "GIMP 支援 gzip 直接壓縮/解壓。只要在檔名加上 .gz (或在安裝了 bzip2 " "的情況下使用 .bz2)，圖像會以壓縮狀態儲存。 當然直接打開壓縮圖檔也可" "以。" #: tips/gimp-tips.xml.in.h:18 msgid "" "The GIMP uses layers to let you organize your image. Think of them as a " "stack of slides or filters, such that looking through them you see a " "composite of their contents." msgstr "" "GIMP 使用圖層來組織圖像。可將圖層想像成一疊投影片或濾鏡，將它們重疊後可以看到" "整合後的內容。" #: tips/gimp-tips.xml.in.h:19 msgid "" "The file selection dialog box has command-line completion with Tab, " "just like the shell. Type part of a filename, hit Tab, and voila, " "it's completed." msgstr "" "在檔案選擇對話方塊內有類似 shell 的自動補齊功能。只要鍵入一部份檔案名稱，按" "下 Tab，就完成了！" #: tips/gimp-tips.xml.in.h:20 msgid "" "The layer named \"Background\" is special because it lacks transparency. " "This prevents you from adding a layer mask or moving the layer up in the " "stack. You may add transparency to it by right-clicking in the Layers dialog " "and selecting \"Add Alpha Channel\"." msgstr "" "圖層中稱為「背景」的一個是比較特殊的，因為它沒有透明度。這樣會妨礙您加上圖層" "遮罩或將圖層移至較面層的位置。在「圖層」對話方塊中按右邊滑鼠按鈕並選取「新增" "透明色版」可以替它加上透明度。" #: tips/gimp-tips.xml.in.h:21 msgid "" "To create a perfect circle, hold Shift while doing an ellipse " "select. To place a circle precisely, drag horizontal and vertical guides " "tangent to the circle you want to select, place your cursor at the " "intersection of the guides, and the resulting selection will just touch the " "guides." msgstr "" "若要畫出正圓形，方法是選擇橢圓區域時按下 Shift 鍵。若要精確地選取放" "置圓形的位置，先拖曳水平及垂直參考線至目標圓形的切線位置，再將游標放到參考線" "的交叉點上，得出來的選擇區域便會僅僅接觸到參考線。" #: tips/gimp-tips.xml.in.h:22 msgid "" "When using a drawing tool (Paintbrush, Airbrush, or Pencil), Shift-" "click will draw a straight line from your last drawing point to your current " "cursor position. If you also press Ctrl, the line will be " "constrained to 15 degree angles." msgstr "" "當使用繪圖工具 (畫筆、噴槍或鉛筆) 時，按 Shift 鍵再按滑鼠按鈕會由上" "一點繪畫一條直線到目前的位置。若再按 Ctrl 鍵，線條的角度會限制為 15°" "的倍數。" #: tips/gimp-tips.xml.in.h:23 msgid "" "When you save an image to work on it again later, try using XCF, the GIMP's " "native file format (use the file extension .xcf). This preserves " "the layers and every aspect of your work-in-progress. Once a project is " "completed, you can save it as JPEG, PNG, GIF, ..." msgstr "" "如果儲存一幅將來可能會再修改的圖像，可試試使用 XCF，即 GIMP 內定使用的圖像格" "式 (延伸檔名為 .xcf)。這樣會保留所有圖層及任何圖像的細節。圖像完成" "後，可以將圖像另存為 JPEG、PNG、GIF 等等..." #: tips/gimp-tips.xml.in.h:24 msgid "" "You can adjust and re-place a selection by using Alt-drag. If this " "makes the window move, your window manager uses the Alt key " "already. Try pressing Shift at the same time." msgstr "" "按 Alt 鍵再用滑鼠拖曳可以調整和重新放置選擇區域。如果這個組合令視窗" "移動，即表示視窗總管已經使用了 Alt鍵。這個時候，請試試同時按下 " "Shift 鍵。" #: tips/gimp-tips.xml.in.h:25 msgid "" "You can adjust the selection range for fuzzy select by clicking and dragging " "left and right." msgstr "您可以調整模糊選擇區域的範圍，方法是按下滑鼠按鈕後向左或右拖曳。" #: tips/gimp-tips.xml.in.h:26 msgid "" "You can create and edit complex selections using the Path tool. The Paths " "dialog allows you to work on multiple paths and to convert them to " "selections." msgstr "" "您可以使用路徑工具來製作及修改複雜的選擇區域。在「路徑」對話方塊中，您可以" "同時處理多個路徑並將它們轉換為選擇區域。" #: tips/gimp-tips.xml.in.h:27 msgid "" "You can drag a layer from the Layers dialog and drop it onto the toolbox. " "This will create a new image containing only that layer." msgstr "" "您可以在「圖層」對話方塊中拖曳一個圖層並將之放進工具箱內。這樣會產生一幅只含" "有該圖層的圖像。" #: tips/gimp-tips.xml.in.h:28 msgid "" "You can drag and drop many things in the GIMP. For example, dragging a color " "from the toolbox or from a color palette and dropping it into an image will " "fill the current image or selection with that color." msgstr "" "GIMP 裡面很多東西都是可以拖曳的。舉個例子，從工具箱或色盤裡拖曳一種顏色出來並" "放到圖像上，會將目前的圖像或選擇區域填滿該種顏色。" #: tips/gimp-tips.xml.in.h:29 msgid "" "You can draw simple squares or circles using Edit->Stroke Selection. It " "strokes the edge of your current selection. More complex shapes can be drawn " "using the Path tool or with Filters->Render->Gfig." msgstr "" "您可以用「編輯→將選擇區域描邊」來繪畫簡單的矩形或圓形。它會用畫筆描出目前的" "選擇區域的邊界。至於更複雜的圖形，可以使用「路徑」工具或者「濾鏡→描繪→Gfig」" "來繪畫。" #: tips/gimp-tips.xml.in.h:30 msgid "" "You can get context-sensitive help for most of the GIMP's features by " "pressing the F1 key at any time. This also works inside the menus." msgstr "" "您可以在任何時候按下 F1 來瀏覽相關功能的說明文件，即使在選單中也同樣適用。" #: tips/gimp-tips.xml.in.h:31 msgid "" "You can perform many layer operations by right-clicking on the text label of " "a layer in the Layers dialog." msgstr "" "在「圖層」對話方塊中，在圖層名稱上按下右邊滑鼠按鈕，可以執行很多不同的圖層功" "能。" #: tips/gimp-tips.xml.in.h:32 msgid "" "You can press or release the Shift and Ctrl keys while you " "are making a selection in order to constrain it to a perfect square or " "circle, or to have it centered on its starting point." msgstr "" "當選取區域時可以同時按下 Shift 及 Ctrl 鍵，這樣可以限制選擇" "區域為正方形或正圓形，或是將滑鼠開始拖曳的位置定為選擇區域的中心點。" #: tips/gimp-tips.xml.in.h:33 msgid "" "You can save a selection to a channel (Select->Save to Channel) and then " "modify this channel with any paint tools. Using the buttons in the Channels " "dialog, you can toggle the visibility of this new channel or convert it to a " "selection." msgstr "" "您可以將選擇區域儲存為色版 (選擇→儲存為色版) 然後使用任何繪畫工具修改該色版。" "利用「色版」對話方塊的按鈕，您可以切換是否顯示這個新的色版並將之轉換為選擇區" "域。" #: tips/gimp-tips.xml.in.h:34 msgid "" "You can use Alt-Tab to cycle through all layers in an " "image (if your window manager doesn't trap those keys...)." msgstr "" "您可以用 Alt-Tab 來逐層顯示圖像中的所有圖層。(但必須注意視" "窗管理程式會否攔截這個按鍵組合...)" #: tips/gimp-tips.xml.in.h:35 msgid "" "You can use the middle mouse button to pan around the image, if it's larger " "than its display window." msgstr "當圖像大於顯示圖像的視窗時，可以用中央滑鼠按鈕抓住圖像在視窗內移動。" #: tips/gimp-tips.xml.in.h:36 msgid "" "You can use the paint tools to change the selection. Click on the \"Quick " "Mask\" button at the bottom left of an image window. Change your selection " "by painting in the image and click on the button again to convert it back to " "a normal selection." msgstr "" "您可以使用繪畫工具來更改選擇區域。按下圖像視窗左下角的「快速遮罩」按鈕。透過" "在圖像上繪圖可以更改選擇區域，然後再按一次按鈕可以將之轉換為普通的選擇區域。" #~ msgid "You can adjust and re-place a selection by using Alt-drag." #~ msgstr "您可以透過按下 Alt 鍵再拖曳滑鼠來調整及重新放置選擇區域。" #~ msgid "" #~ "If your fonts turn out blocky, that's because they're not scalable fonts. " #~ "Most X servers support scalable Type 1 Postscript fonts. Download and " #~ "install them. Some font servers allow you to use TrueType (.ttf) " #~ "fonts, which are also scalable." #~ msgstr "" #~ "如果字型看起來很不平滑，那是因為它們不是可縮放的字型。大部份的 X 伺服器都" #~ "支援 Type 1 Postscript 字型。您可以下載並安裝這類字型。某些字型伺服程式允" #~ "許使用 TrueType (.ttf) 字型，它們也是可以縮放的。"