# This is the system-wide gimprc file.  Any change made in this file
# will affect all users of this system, provided that they are not
# overriding the default values in their personal gimprc file.
#
# Lines that start with a '#' are comments.
# Blank lines are ignored.

# The variable gimp_dir refers to your personal gimp directory. It is
# set to either the value _gimp1.1 or the value of the environment
# variable GIMP_DIRECTORY.  If the path in gimp_dir is relative, it is
# considered relative to your home directory (value of environment
# variable %HOME%, or %HOMEDRIVE%:%HOMEPATH%).  If you don't have a
# home directory (typical on Windows systems), gimp_dir refers to
# directory in the GIMP installation directory.

# The variable gimp_install_dir is set to the directory where the gimp
# was installed.

(exec_prefix "${gimp_install_dir}\\bin")
(gimp_data_dir "${gimp_install_dir}")
(gimp_plugin_dir "${gimp_install_dir}")

# Set the temporary storage directory...files will appear here
# during the course of running the gimp.  Most files will disappear
# when the gimp exits, but some files are likely to remain,
# such as working palette files, so it is best if this directory
# not be one that is shared by other users.
(temp-path "${TEMP}")

# Set the swap file location. The gimp uses a tile based memory
# allocation scheme. The swap file is used to quickly and easily
# swap files out to disk and back in. Be aware that the swap file
# can easily get very large if the gimp is used with large images.
# Also, things can get horribly slow if the swap file is created on 
# a directory that is shared over a network.  For these reasons, it may 
# be desirable to put your swap file in your %TEMP% directory.
(swap-path "${TEMP}")

# Set the brush search path...this path will be searched for valid
#  brushes at startup.
(brush-path "${gimp_dir}\\brushes;${gimp_data_dir}\\brushes")

# Specify a default brush. If none is specified it defaults to the
#  "1circle.gbr" brush which is just a single pixel sized brush.
#  The brush is searched for in the brush path.
(default-brush "19fcircle.gbr")

# Set the pattern search path...this path will be searched for valid
#  patterns at startup.
(pattern-path "${gimp_dir}\\patterns;${gimp_data_dir}\\patterns")

# Specify a default pattern.
#  The pattern is searched for in the specified pattern paths.
(default-pattern "wood2.pat")

# Set the palette search path...this path will be searched for valid
#  palettes at startup.
(palette-path "${gimp_dir}\\palettes;${gimp_data_dir}\\palettes")

# Specify a default palette.
#  The pattern is searched for in the specified pattern paths.
(default-palette "Default")

# Set the gradient search path...this path will be searched for valid
#  gradients at startup.
(gradient-path "${gimp_dir}\\gradients;${gimp_data_dir}\\gradients")

# Specify a default gradient.
#  The gradient is searched for in the specified gradient paths.
(default-gradient "German_flag_smooth")

# Set the plug-in search path...this path will be searched for
#  plug-ins when the plug-in is run.
(plug-in-path "${gimp_dir}\\plug-ins;${gimp_dir}\\plug-ins\\script-fu;${gimp_plugin_dir}\\plug-ins")

# Set the path for the script-fu plug-in.  This value is ignored by
#  the GIMP if the script-fu plug-in is never run.
(script-fu-path "${gimp_dir}\\scripts;${gimp_data_dir}\\scripts")

# Set the path to modules that are to be initialized at startup
(module-path "${gimp_dir}\\modules;${gimp_plugin_dir}\\modules")

# The tile cache is used to make sure the gimp doesn't thrash
# tiles between memory and disk. Setting this value higher will
# cause the gimp to use less swap space, but will also cause
# the gimp to use more memory. Conversely, a smaller cache size
# causes the gimp to use more swap space and less memory.
# Note: the gimp will still run even if `tile-cache-size' is
# set to 0. The actual size can contain a suffix of 'm', 'M',
# 'k', 'K', 'b' or 'B', which makes the gimp interpret the
# size as being specified in megabytes, kilobytes and bytes
# respectively. If no suffix is specified the size defaults to
# being specified in kilobytes.
(tile-cache-size 10m)

# Speed of marching ants in the selection outline
#  this value is in milliseconds
#  (less time indicates faster marching)
(marching-ants-speed 300)

# Set the number of operations kept on the undo stack
(undo-levels 5)

# Set the color-cube resource for dithering on 8-bit displays
#  The 4 values stand for Shades of red, green, blue and grays
#  Multiplying the # of shades of each primary color yields
#  the total number of colors that will be allocated from the
#  gimp colormap.  This number should not exceed 256.  Most of the
#  colors remaining after the allocation of the colorcube
#  will be left to the system palette in an effort to reduce
#  colormap "flashing".
(color-cube 6 6 4 24)

# Install a GIMP colormap by default -- only for 8-bit displays
# (install-colormap)

# Specify that marching ants for selected regions will be drawn
#  with colormap cycling as oposed to redrawing with different stipple masks
#  this color cycling option works only with 8-bit displays
# (colormap-cycling)

# Tools such as fuzzy-select and bucket fill find regions based on a
#  seed-fill algorithm.  The seed fill starts at the intially selected
#  pixel and progresses in all directions until the difference of pixel
#  intensity from the original is greater than a specified threshold
#  ==> This value represents the default threshold
(default-threshold 15)

# There is always a tradeoff between memory usage and speed.  In most
#  cases, the GIMP opts for speed over memory.  However, if memory is
#  a big issue, set stingy-memory-use
# (stingy-memory-use)

# When zooming into and out of images, this option enables the
#  automatic resizing of windows
# (allow-resize-windows)

# Context-dependent cursors are cool.  They are enabled by default.
#  However, they require overhead that you may want to do without.
#  Uncomment this line to disable them.
# (no-cursor-updating)

# Layer preview sizes:
#  none:    no previews in layers dialog/layer selector
#  small:   32x32
#  medium:  64x64
#  large:   128x128
#  #:       #x#
(preview-size small)

# Tooltips
#  Comment this out to disable the tooltips in the toolbox
# (dont-show-tool-tips)

# Controlling ruler visibility
#  The default behavior is for rulers to be ON.
#  This can also be toggled with the View->Toggle Rulers command
#  or shift+control+r
# (dont-show-rulers)

# Default units
#  This is the default unit of a new image. It will appear in the
#  File/New dialog and will be the unit for coordinate display when
#  dot-for-dot is off.
#  The default units can be one of:
#  (inches millimeters points picas) plus those in your user units database
#  The default is inches
(default-units inches)

# Default Resolution units
#  This is used to specify the resolution of a new image
#  The units for the resolution can be one of:
#  (inches millimeters points picas) plus those in your user units database
#  The default is inches
(default-resolution-units inches)

# Default Resolution
#  This is the default resolution of a new image in dpi
#  The default is 72.0 dpi in both x and y direction
(default-xresolution 72.0)
(default-yresolution 72.0)

# Controlling statusbar visibility
#  The default behavior is to show the statusbar.
#  This can also be toggled with the View->Toggle Statusbar command
#  or shift+control+s
# (dont-show-statusbar)

# Disable auto saving
#  Auto saving is not yet implemented! Nothing will be auto-saved, no matter
#  how you set this here.  
#  Just uncomment the line below...
# (dont-auto-save)

# Disable confirmation before closing an image without saving
#  Just uncomment the next line
# (dont-confirm-on-close)

# By default GIMP remembers the positions and sizes of the main dialogs and
#  advices your window-manager to place them there again the next time you
#  use the GIMP. To disable this behaviour, uncomment the line below...
# (dont-save-session-info)

# To let GIMP try to restore your last saved session, 
#  uncomment the line below...
# (always-restore-session)

# Setting the level of interpolation
#  Uncommenting this line will enable cubic interpolation.
#  By default, GIMP uses linear interpolation, which is faster, but has poorer quality
# (cubic-interpolation)

# Set the gamma correction values for the display
#  1.0 corresponds to no gamma correction.  For most displays,
#  gamma correction should be set to between 2.0 and 2.6
#  Run the utility "gamma_correct" to determine appropriate values
#  for your display.
#
# One important item to keep in mind:  Many images that you might
#  get from outside sources will in all likelihood already be
#  gamma-corrected.  In these cases, the image will look washed-out
#  if the gimp has gamma-correction turned on.  If you are going
#  to work with images of this sort, turn gamma correction off
#  by removing this line, or setting the values to 1.0.
#  gamma-correction 1.0
#  gamma-correction 2.0
#                 ___
(gamma-correction 1.0)

# Set the manner in which transparency is displayed in images
#  Transparency type can be one of:
#    0: Light Checks
#    1: Mid-Tone Checks
#    2: Dark Checks
#    3: White Only
#    4: Gray Only
#    5: Black Only
#  Check size can be one of:
#    0: Small
#    1: Medium
#    2: Large
(transparency-type 1)
(transparency-size 2)

# gfig pattern directory
(gfig-path "${gimp_dir}\\gfig;${gimp_data_dir}\\gfig")

# This string sets how image window titles are formatted.
# The following percent expansions are performed:
#   %%  literal percent sign
#   %f  bare filename, or "Untiltled"
#   %F  full path to file
#   %p  PDB image id
#   %i  view instance number
#   %t  image type (RGB, indexed, greyscale)
#   %z  zoom factor as a percentage
#   %s  source scale factor
#   %d  destination scale factor
(image-title-format "%f-%p.%i (%t) %z%%")

# [end of file]