Plug-ins are not prepared to handle high-precision brushes/
patterns, even when they're otherwise aware of high-precision
drawables, so make sure to always use compat formats when
communicating brush/pattern data to plug-ins.
Allowing plug-ins to handle high-precision brush/pattern data would
require some additional API.
If you click on a zone filled in several visible layers, you don't
necessarily want the top layer. You may want one below. With this
change, as long as you hold alt, you will loop through all candidate
layers from top to bottom (then looping back top when reaching the
bottom).
In a first alt-click, you will always end up to the top candidate.
The whole bucket fill specific enum stuff is on its way out, so let's
keep this one out of libgimp for now until we decide how to present
line art filling in the PDB.
The raw PDB wrapper _gimp_drawable_get_format() only transfers the
format's encoding, so we need to add the space from the image's color
profile.
Also fix handling of indexed formats: remove our own indexed format
cache and rely on babl_new_palette_with_space() to return the same
format for any (encoding, space) combination.
Also update the PDB docs to reflect that most magic is happening in
the libgimp C wrapper.
This was my initial choice, but the more I think about it, the less I am
sure this was the right choice. There was some common code (as I was
making a common composite bucket fill once the line art was generated),
but there is also a lot of different code and the functions were filled
of exception when we were doing a line art fill. Also though there is a
bit of color works (the way we decide whether a pixel is part of a
stroke or not, though currently this is basic grayscale threshold), this
is really not the same as other criterions. In particular this was made
obvious on the Select by Color tool where the line art criterion was
completely meaningless and would have had to be opted-out!
This commit split a bit the code. Instead of finding the line art in the
criterion list, I add a third choice to the "Fill whole selection"/"Fill
similar colors" radio. In turn I create a new GimpBucketFillArea type
with the 3 choices, and remove line art value from GimpSelectCriterion.
I am not fully happy yet of this code, as it creates a bit of duplicate
code, and I would appreciate to move some code away from gimpdrawable-*
and gimppickable-* files. This may happen later. I break the work in
pieces to not get too messy.
Also this removes access to the smart colorization from the API, but
that's probably ok as I prefer to not freeze options too early in the
process since API needs to be stable. Probably we should get a concept
of experimental API.
The code was too much spread out, in core and tool code, and also it was
made too specific to fill. I'll want to reuse this code at least in the
fuzzy select tool. This will avoid code duplication, and also make this
new process more self-contained and simpler to review later (the
algorithm also has a lot of settings and it is much cleaner to have them
as properties rather than passing these as parameters through many
functions).
The refactoring may not be finished; that's at least a first step.
The distance map has all the information we need already. Also we will
actually grow up to the max radius pixel (middle pixel of a stroke).
After discussing with Aryeom, we realized it was better to fill a stroke
fully (for cases of overflowing, I already added the "Maximum growing
size" property anyway).
When flooding the line art, we may overflood it in sample merge (which
would use color in the line art computation). And if having all colors
on the same layer, this would go over other colors (making the wrong
impression that the line art leaked).
This new option is mostly to keep some control over the mask growth.
Usually a few pixels is enough for most styles of drawing (though we
could technically allow for very wide strokes).
We don't really need to flow every line art pixel and this new
implementation is simpler (because we don't actually need over-featured
watershedding), and a lot lot faster, making the line art bucket fill
now very reactive.
For this, I am keeping the computed distance map, as well as local
thickness map around to be used when flooding the line art pixels
(basically I try to flood half the stroke thickness).
Note that there are still some issues with this new implementation as it
doesn't properly flood yet created (i.e. invisible) splines and
segments, and in particular the ones between 2 colored sections. I am
going to fix this next.
Since commit b00037b850, erosion size is not used anymore, as this step
has been removed, and the end point detection now uses local thickness
of strokes instead.
I have not added all the options for this new tool yet, but this sets
the base. I also added a bit of TODO for several places where we need to
make it settable, in particular the fuzzy select tool, but also simply
PDB calls (this will need to be a PDB context settings.
Maybe also I will want to make some LineArtOptions struct in order not
to have infinite list of parameters to functions. And at some point, it
may also be worth splitting a bit process with other type of
selection/fill (since they barely share any settings anyway).
Finally I take the opportunity to document a little more the parameters
to gimp_lineart_close(), which can still be improved later (I should
have documented these straight away when I re-implemented this all from
G'Mic code, as I am a bit fuzzy on some details now and will need to
re-understand code).
Right now, this is mostly meaningless as it is still done sequentially.
But I am mostly preparing the field to pre-compute the line art as
background thread.
This commit implements part of the research paper "A Fast and Efficient
Semi-guided Algorithm for Flat Coloring Line-arts" from the GREYC (the
people from G'Mic). It is meant to select regions from drawn sketchs in
a "smart" way, in particular it tries to close non-perfectly closed
regions, which is a common headache for digital painters and colorists.
The implementation is not finished as it needs some watersheding as well
so that the selected area does not leave "holes" near stroke borders.
The research paper proposes a new watersheding algorithm, but I may not
have to implement it, as it is more focused on automatic colorization
with prepared spots (instead of bucket fill-type interaction).
This will be used in particular with the fuzzy select and bucket fill
tools.
Note that this first version is a bit slow once we get to big images,
but I hope to be able to optimize this.
Also no options from the algorithm are made available in the GUI yet.
... to make multi-color hard-edge gradient fills possible
Add a new "step" gradient-segment blending function, which is 0
before the midpoint, and 1 at, and after, the midpoint. This
creates a hard-edge transition between the two adjacent color stops
at the midpoint. Creating such a transition was already possible,
but required duplicating the same color at the opposing ends of two
adjacent stops, which is cumbersome.
Add a Babl space parameter to gimp_gegl_color_new() and all utility
functions using it. Pass NULL if the GimpRGB actually is sRGB, pass
the image's layer space if the color was already converted using
gimp_pickable_srgb_to_image_color() or similar.
Squashed commit of the following:
commit ee1ff7d502658cfa1248a13a3f0348495db07eda
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Sun Jul 29 00:31:47 2018 +0900
Fixed that gimp-text-dir-ttb-* icons are lacked in Symbolic.
commit d87d012d697628da28fe90199cc04b95b72ba8ef
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Sat Jul 28 16:23:10 2018 +0900
Fix a typo.
commit cf0238bf7df56c384cdf3b7ec69557d14740f853
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Sat Jul 28 15:50:57 2018 +0900
Fixed seg fault error.
commit b07f60d06f
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Fri Jul 27 17:15:34 2018 +0900
Add support for vertical text writing.
https://gitlab.gnome.org/GNOME/gimp/issues/641
All babl formats now have a space equivalent to a color profile,
determining the format's primaries and TRCs. This commit makes GIMP
aware of this.
libgimp:
- enum GimpPrecision: rename GAMMA values to NON_LINEAR and keep GAMMA
as deprecated aliases, add PERCEPTUAL values so we now have LINEAR,
NON_LINEAR and PERCPTUAL for each encoding, matching the babl
encoding variants RGB, R'G'B' and R~G~B~.
- gimp_color_transform_can_gegl_copy() now returns TRUE if both
profiles can return a babl space, increasing the amount of fast babl
color conversions significantly.
- TODO: no solution yet for getting libgimp drawable proxy buffers in
the right format with space.
plug-ins:
- follow the GimpPrecision change.
- TODO: everything else unchanged and partly broken or sub-optimal,
like setting a new image's color profile too late.
app:
- add enum GimpTRCType { LINEAR, NON_LINEAR, PERCEPTUAL } as
replacement for all "linear" booleans.
- change gimp-babl functions to take babl spaces and GimpTRCType
parameters and support all sorts of new perceptual ~ formats.
- a lot of places changed in the early days of goat invasion didn't
take advantage of gimp-babl utility functions and constructed
formats manually. They all needed revisiting and many now use much
simpler code calling gimp-babl API.
- change gimp_babl_format_get_color_profile() to really extract a
newly allocated color profile from the format, and add
gimp_babl_get_builtin_color_profile() which does the same as
gimp_babl_format_get_color_profile() did before. Visited all callers
to decide whether they are looking for the format's actual profile,
or for one of the builtin profiles, simplifying code that only needs
builtin profiles.
- drawables have a new get_space_api(), get_linear() is now get_trc().
- images now have a "layer space" and an API to get it,
gimp_image_get_layer_format() returns formats in that space.
- an image's layer space is created from the image's color profile,
change gimpimage-color-profile to deal with that correctly
- change many babl_format() calls to babl_format_with_space() and take
the space from passed formats or drawables
- add function gimp_layer_fix_format_space() which replaces the
layer's buffer with one that has the image's layer format, but
doesn't change pixel values
- use gimp_layer_fix_format_space() to make sure layers loaded from
XCF and created by plug-ins have the right space when added to the
image, because it's impossible to always assign the right space upon
layer creation
- "assign color profile" and "discard color profile" now require use
of gimp_layer_fix_format_space() too because the profile is now
embedded in all formats via the space. Add
gimp_image_assign_color_profile() which does all that and call it
instead of a simple gimp_image_set_color_profile(), also from the
PDB set-color-profile functions, which are essentially "assign" and
"discard" calls.
- generally, make sure a new image's color profile is set before
adding layers to it, gimp_image_set_color_profile() is more than
before considered know-what-you-are-doing API.
- take special precaution in all places that call
gimp_drawable_convert_type(), we now must pass a new_profile from
all callers that convert layers within the same image (such as
image_convert_type, image_convert_precision), because the layer's
new space can't be determined from the image's layer format during
the call.
- change all "linear" properties to "trc", in all config objects like
for levels and curves, in the histogram, in the widgets. This results
in some GUI that now has three choices instead of two.
TODO: we might want to reduce that back to two later.
- keep "linear" boolean properties around as compat if needed for file
pasring, but always convert the parsed parsed boolean to
GimpTRCType.
- TODO: the image's "enable color management" switch is currently
broken, will fix that in another commit.
Add a gimp-register-file-handler-priority procedure, which can be
used to set the priority of a file-handler procedure. When more
than one file-handler procedure matches a file, the procedure with
the lowest priority is used; if more than one procedure has the
lowest priority, it is unspecified which one of them is used. The
default priority of file-handler procedures is 0.
Add the necessary plumbing (plus some fixes) to the plug-in manager
to handle file-handler priorities. In particular, use two
different lists for each type of file-handler procedures: one meant
for searching, and is sorted according to priority, and one meant
for display, and is sorted alphabetically.
Instead just transform the measurement extremities appropriately to
still map to the same points.
To do so, I also added out parameters to gimp_image_resize_to_layers()
so that calling code can get offsets from old origin (as well as new
image dimensions).
Use gimp_fonts_wait(), added in the previous commit, to wait for
fonts to finish loading before operations that depend on font
availability. In particular, this includes font- and text-related
PDB functions, and text-layer rendering.
Fonts should not be blocking startup as this provides a very bad
experience when people have a lot of fonts. This was experienced even
more on Windows where loading time are often excessively long.
We were already running font loading in a thread, yet were still
blocking startup (thread was only so that the loading status GUI could
get updated as a feedback). Now we will only start loading and proceed
directly to next steps.
While fonts are not loaded, the text tool will not be usable, yet all
other activities can be performed.
so plug-ins cannot thaw what they haven't frozen, and the code
can clean up frozen stuff left behind by crashed or broken plug-ins.
Also redo the cleanup code so it only keeps track of the undo group
counts and freeze counts of what *this* GimpPlugInProcFrame did
itself. That should make it even stricter against broken code that
could mess up internals.
These procedures freeze/thaw the corresponding containers of the
image, allowing plug-ins that perform many changes affecting any of
these containers to suppress updates to the corresponding dialogs,
significantly improving performance.
We were only able to translate selections and layers (bot not channels
and paths) via the PDB, this new procedure fixes that. Deprecation of
old API and some more transform consistency to follow...
In the gimp-channel-combine-masks PDB wrapper, only push an undo step
if the modified channel is attached to an image. It's a completely
reasonable use case to combine unattached channels.
Ell