gimp/INSTALL.in

497 lines
23 KiB
Plaintext
Raw Normal View History

---------------------------------------
Installation instructions for GIMP @GIMP_APP_VERSION@
---------------------------------------
There are some basic steps to building and installing GIMP.
GIMP @GIMP_APP_VERSION@ replaces earlier GIMP 2.99.x versions. It is advised to
uninstall them before installing GIMP @GIMP_APP_VERSION@. Since libgimp* libraries
and data are all versionned anyway, it is possible to keep your older
GIMP 2.x installation in parallel to GIMP @GIMP_APP_VERSION@ on a same prefix.
GIMP @GIMP_APP_VERSION@ is not backward compatible with GIMP 2.10 and earlier
versions. Plug-ins and scripts written for GIMP 2.10, 2.8, 2.6 or
earlier GIMP 2.x versions will not work because the API changed.
The most important part is to make sure the requirements for a build
are fulfilled. We depend on a number of tools and libraries which are
listed below. For libraries this means you need to also have the
header files installed.
This file is generated (versions are filled by our build system) and
focuses on keeping an up-to-date list of dependencies intended to
packagers, contributors or whoever wants to compile GIMP from source.
Building and running self-built software often requires more setup, in
particular environment variables so that your system knows where to
find the various pieces of the software. The following document can
help in that regard:
https://developer.gimp.org/core/setup/build/
2009-05-13 16:19:52 +08:00
******************************************************************
* Unless you are experienced with building software from source, *
* you should not attempt to build all these libraries yourself! *
* We suggest that you check if your distributor has development *
* packages of them and use these instead. *
******************************************************************
2009-05-13 16:19:52 +08:00
1. You need to have installed a recent version of pkg-config (>= @GIMP_PKGCONFIG_VERSION@) available
from https://www.freedesktop.org/software/pkgconfig/.
The compatible pkgconf utility would also work.
2. You need gettext version 0.19.8 or newer. Older versions did not have support yet
for certain file formats.
3. You need to have GEGL version @GEGL_REQUIRED_VERSION@ or newer and babl version
@BABL_REQUIRED_VERSION@ or newer. You can get them from https://gegl.org/ or clone
2009-04-25 23:57:19 +08:00
them from the GNOME git repository:
https://gitlab.gnome.org/GNOME/babl.git
https://gitlab.gnome.org/GNOME/gegl.git
GEGL must be built with Cairo support, i.e. -Dcairo=enabled option (required
for some mandatory operations such as "gegl:npd").
Introspection must be enabled for both babl and GEGL with -Denable-gir=true
and -Dintrospection=true respectively. The only case where we don't build
GIR data is when cross-compiling because of the difficulty to make cross-tools
for GObject Introspection.
Nevertheless if you have working GIR cross-tools, you can force the expected
behavior with GIMP's meson option -Dcan-crosscompile-gir=true
Optional:
- build GEGL with libumfpack (SuiteSparse) (`-Dumfpack=enabled`)
for alternative Matting engine "gegl:matting-levin" and OpenEXR
library (`-Dopenexr=enabled`) for OpenEXR format support.
- build GEGL with maxflow (https://github.com/gerddie/maxflow) and
the option -Dworkshop=true in order to be able to select the
experimental Paint Select tool in the Playground (operation
"gegl:paint-select" is needed).
- The "Show Image Graph" item in the "Debug" menu (hidden by
default on stable release) requires the GEGL operation
"gegl:introspect" which is always built but deactivated unless
the `dot` tool from graphviz is available (runtime dependency).
4. You need to have installed GTK version @GTK_REQUIRED_VERSION@ or newer.
GIMP also needs a recent version of GLib (>= @GLIB_REQUIRED_VERSION@), GDK-Pixbuf
(>= @GDK_PIXBUF_REQUIRED_VERSION@), and Pango (>= @PANGO_REQUIRED_VERSION@). Sources for these can be grabbed
from https://download.gnome.org/sources/.
5. We use cairo >= @CAIRO_REQUIRED_VERSION@, which is hosted at
https://www.cairographics.org/.
6. We require PangoCairo, a Pango backend using Cairo. Make sure you
have Cairo, FreeType2 and fontconfig installed before you compile
Pango. GIMP depends on freetype2 being newer than version @FREETYPE2_REQUIRED_VERSION@
and fontconfig @FONTCONFIG_REQUIRED_VERSION@ or newer. Older versions are known to have
bugs that seriously affect the stability of GIMP.
On Windows, we recommend fontconfig 2.13.95 (or over) where support
of fonts in user directory (Windows 1809 feature) appeared.
We also require HarfBuzz @HARFBUZZ_REQUIRED_VERSION@ or newer, an OpenType text shaping
tool. As this is a dependency for Pango, you will likely have it
installed, but you may have to install a development package for
the headers.
2014-05-03 02:31:07 +08:00
2014-08-13 08:36:55 +08:00
7. The file-compressor plug-in requires zlib, libbzip2, and liblzma to
be installed. All these libraries are required dependencies.
8. For metadata access GIMP requires the gexiv2 @GEXIV2_REQUIRED_VERSION@ or newer library.
It is hosted at: https://wiki.gnome.org/Projects/gexiv2
9. libpng, libjpeg, libtiff, librsvg and lcms are hard dependencies
that can not be disabled. poppler is also a hard dependency because
PDF is too common nowadays for it to be an option (at least for
import); and poppler-data (CJK and Cyrillic support in PDF) is also
required because no languages should be considered "second class
citizen". If we support PDF, let's support it properly, i.e.
exhaustively.
There might be some issues with librsvg, based on the fact newer
versions are in Rust which is not buildable on all platforms. Yet
SVG support was deemed too important to be considered "optional"
for a decent graphics activity. Nevertheless a packager really
intent to have GIMP running on an architecture with no Rust support
could still:
1) easily patch out the file-svg plug-in from build system;
2) build GIMP with -Dvector-icons=false. Ironically librsvg is
needed at build time for this option, in order to create PNG
variants of icons (making librsvg unneeded at runtime). So all it
takes is to have a build machine with librsvg to create the PNG
icons, package and deliver them for machines without librsvg.
This is the compromise we came with, i.e. officially making SVG a
first-class file format, yet explaining how you could ignore it if
you really wanted or needed to.
10. For MyPaint brushes, brushlib (libmypaint) @LIBMYPAINT_REQUIRED_VERSION@ is used.
The libmypaint repository is hosted at:
2014-07-23 00:03:46 +08:00
https://github.com/mypaint/libmypaint
2014-07-23 00:03:46 +08:00
If installing from repository, do not install the master branch!
Checkout the last tag "v1.y.z" from `libmypaint-v1` branch instead
(for instance "v1.6.1" tag at time of writing), or simply install
from a tarball or from your favorite package manager.
2021-02-24 19:33:03 +08:00
In particular, do NOT install tags or release tarballs versioned
"v2.y.z". GIMP depends on the version 1 of libmypaint and is
incompatible with the version 2 (which is still experimental anyway
and has no stable release at time of writing).
11. We also need the mypaint-brushes data package:
https://github.com/mypaint/mypaint-brushes
If installing from repository, install from branch "v1.3.x" or the
last tag "v1.y.z" (e.g. "v1.3.1" at time of writing).
In particular do NOT install from `master` branch which installs
brushes incompatible with GIMP (the `master` branch and v2 brushes
are targeted to software using recent libmypaint which GIMP wasn't
ported to yet).
Also this is a data packages and therefore it will install the
pkg-config file inside `$PREFIX/share/pkgconfig/`. If you install
mypaint-brushes from repository in a non-standard prefix, you will
have to make sure your $PKG_CONFIG_PATH environment variable also
lists `$PREFIX/share/pkgconfig/`.
12. GIMP uses GLib's GIO library to handle file URIs and any I/O in
general, transparently, regardless where the file is stored, i.e.
locally, remotely, with which scheme, and so on. GIO in turn
supports various backends through modules. We don't know all the
modules available but since HTTP and HTTPS are so pervasive
nowadays, we kind of consider a least GIO modules for these schemes
mandatory (it allows to open from a pasted URL or just drag'n drop
from e.g. a browser).
For HTTP support (and many other schemes), on Linux at least, you
should install `gvfs`:
https://wiki.gnome.org/Projects/gvfs
It is unclear whether `gvfs` can be built and installed on other
platforms such as Windows and macOS.
For HTTPS support, you should install `glib-networking`:
https://gitlab.gnome.org/GNOME/glib-networking
Of course there might be more modules providing support of more
storage backends. Ideally GIMP would have support to load from any
backend so packaging together with more GIO modules or recommending
them in a package manager would be ideal. In any case, installing
the ones for HTTP and HTTPS seems like the minimum nowadays.
13. You may want to install other third party libraries or programs
that are needed for some of the available plug-ins. We recommend
to check that the following libraries are installed: openjpeg,
libmng, libwmf, libaa and libgs (Ghostscript).
14. HEIF support depends on the libheif library. If you don't have
access to pre-built packages, the code is available at:
https://github.com/strukturag/libheif
Make sure you build libheif with libde265 and libx265 support (for
respectively decoding and encoding of HEVC, i.e. HEIC files), and
libaom decoder and encoder (for AV1, i.e. AVIF files), otherwise
the plug-in is mostly useless.
15. GObject Introspection requires the following dependencies to be
built and installed with introspection as well: babl, cairo,
GdkPixbuf, GEGL, GIO, GLib, GObject and GTK.
16. Windows builds can now generate backtrace logs upon a crash.
The logs will be available in: %APPDATA%\GIMP\@GIMP_APP_VERSION@\CrashLog\
The feature depends on Dr.MinGW's ExcHndl library:
https://github.com/jrfonseca/drmingw
17. Optional step if compiling GIMP from git (unneeded from tarball): you need
to initialize submodules with command `git submodule update --init`.
18. Configure GIMP by running `meson _build`. You may want to pass some
options to it, see below.
19. Build GIMP by running `ninja -C _build'.
20. Install GIMP by running `ninja -C _build install'. In order to
avoid clashes with other versions of GIMP, we install a binary
called gimp-@GIMP_APP_VERSION@. By default there's also a link created so that
you can type 'gimp' to start gimp-@GIMP_APP_VERSION@.
21. Summary of required packages and what version you need:
Package Name Version
appstream-glib @APPSTREAM_GLIB_REQUIRED_VERSION@
ATK @ATK_REQUIRED_VERSION@
babl @BABL_REQUIRED_VERSION@
cairo @CAIRO_REQUIRED_VERSION@
Fontconfig @FONTCONFIG_REQUIRED_VERSION@
freetype2 @FREETYPE2_REQUIRED_VERSION@
GDK-PixBuf @GDK_PIXBUF_REQUIRED_VERSION@
GEGL @GEGL_REQUIRED_VERSION@
gexiv2 @GEXIV2_REQUIRED_VERSION@
GIO
GLib @GLIB_REQUIRED_VERSION@
glib-networking
GTK @GTK_REQUIRED_VERSION@
gvfs (on Linux)
HarfBuzz @HARFBUZZ_REQUIRED_VERSION@
libbzip2
libjpeg
liblzma @LIBLZMA_REQUIRED_VERSION@
libmypaint @LIBMYPAINT_REQUIRED_VERSION@
libpng @LIBPNG_REQUIRED_VERSION@
libpoppler-glib @POPPLER_REQUIRED_VERSION@
librsvg @RSVG_REQUIRED_VERSION@
Issue #7956: Add full BigTiff open/export support to GIMP. Recent libtiff supports loading BigTiff automatically so we didn't have anything to do there (as long as a recent libtiff was used). For creating a BigTIFF though, we simply needed to add a "8" flag to TIFFOpen/TIFFClientOpen when creating a new image (i.e. using "w8" mode) as explained here in the "Implementation Strategy" section: http://www.simplesystems.org/libtiff/BigTIFFProposal.html What this commit does: - Explicitly bump our libtiff requirement to version 4.0.0 or higher (which is where BigTiff support appeared). libtiff 4.0.0 was apparently released on 2011-12-22 and is available on all current distributions, so it's probably not a problem. - Switch to detect libtiff with a pkg-config test (added in libtiff commit faf5f3eb before 4.0.0 release, so it's fine) instead of function checks. (Note: meson was already detecting for libtiff-4 with pkg-config, which was obviously wrong since it should have mimicked autotools, but well… then changes were minimal on meson) - Add a new "bigtiff" boolean argument to the "file-tiff-save" PDB procedure, FALSE by default. I set this as the first argument as I figure that choosing the format you want is quite a major choice. Unless I misunderstood something, since BigTIFF is really designed to be an evolution of TIFF with a "minimum change strategy", i.e. mostly using 64-bit instead of 32-bit offsets, everything which is possible in TIFF will be in BigTIFF (and oppositely as well, except of course having huge files) so there is no need to have 2 separate procedures. - Adding this new argument to the GUI dialog as a checkbox. - Tweak the load and export procedures' documentation strings to make clear we support both TIFF and BigTIFF. Note: interestingly there doesn't seem to be a separate mimetype for BigTIFF so nothing to update on this side. - Tweak the procedure labels too to mention BigTIFF. Since BigTIFF is still a different format (though very closely resembling) from TIFF, unlike some others which are just extensions embedded in a TIFF file (like GeoTIFF we recently added), I figure it deserves to be explicitly cited.
2022-03-11 17:50:44 +08:00
libtiff @LIBTIFF_REQUIRED_VERSION@
Little CMS @LCMS_REQUIRED_VERSION@
mypaint-brushes-1.0
pangocairo @PANGO_REQUIRED_VERSION@
poppler-data @POPPLER_DATA_REQUIRED_VERSION@
PyGObject
Python @PYTHON3_REQUIRED_VERSION@
zlib
1997-11-25 06:05:25 +08:00
22. Summary of optional packages:
Package Name Version Feature
cairo-pdf @CAIRO_PDF_REQUIRED_VERSION@ PDF export
cfitsio - FITS
iso-codes - Language selection
ExcHndl - Crash logs on Windows with Dr. MinGW
gs - ghostscript
libaa - ASCII art
libheif @LIBHEIF_REQUIRED_VERSION@ HEIF (HEIC, AVIF)
libilbm - Amiga IFF/ILBM
libjxl @LIBJXL_REQUIRED_VERSION@ JPEG XL
libmng - MNG
libwebp @WEBP_REQUIRED_VERSION@ WebP (built with --enable-libwebpmux and --enable-libwebpdemux)
libwmf @WMF_REQUIRED_VERSION@ WMF
libXcursor - X11 Mouse Cursor
libxpm - XPM
openexr @OPENEXR_REQUIRED_VERSION@ OpenEXR
OpenJPEG @OPENJPEG_REQUIRED_VERSION@ JPEG 2000
qoi - QOI
webkit @WEBKITGTK_REQUIRED_VERSION@ Help browser & webpage
vala - Vala plug-ins
23. Summary of optional runtime dependencies:
darktable >= 1.7, with lua support enabled for raw loading
RawTherapee >= 5.2 for raw loading
xdg-email for sending emails
sendmail for sending emails if --with-sendmail enabled
gdb or lldb for our new bug-reporting dialog
"gegl:matting-levin" GEGL operation for alternative matting engine
GJS for Javascript plug-ins
Lua 5.1 (or LuaJIT) and LGI for Lua plug-ins
dot for "Show Image Graph" (unstable branches)
xdg-desktop-portal implemented for your desktop for various D-Bus API (screenshot, color-picking…)
1997-11-25 06:05:25 +08:00
Generic instructions for configuring and compiling auto-configured
packages are included below. Here is an illustration of commands that
might be used to build and install GIMP. The actual configuration,
1997-11-25 06:05:25 +08:00
compilation and installation output is not shown.
% tar xvf gimp-@GIMP_VERSION@.tar.xz # unpack the sources
% cd gimp-@GIMP_VERSION@ # change to the toplevel directory
% meson _build # `configure' step
% ninja -C _build # build GIMP
% ninja -C _build install # install GIMP
1997-11-25 06:05:25 +08:00
The `configure' step examines your system, and adapts GIMP to run on
it. The script has many options, some of which are described in the
generic instructions included at the end of this file. All of the
options can be listed using the command `meson configure' if you
successfully configured already, or by reading the file `meson_options.txt`.
There are several special options the GIMP configure script recognizes.
These are:
1997-11-25 06:05:25 +08:00
-Dvector-icons=false This option installs raster icons instead of
vector icons.
-Drelocatable-bundle=yes This option forces GIMP to search some
resources (e.g. MyPaint brushes or libwmf fonts) relatively to the
running prefix, rather than using build-time paths.
-Dansi=true This option causes stricter ANSI C checking to be
performed when compiling with GCC. The default is for strict
checking to be disabled. NOTE: This option is intended primarily as
a convenience for developers.
-Dgimpdir=DIR. This option changes the default directory GIMP uses to
search for its configuration files from ~/.config/GIMP/@GIMP_APP_VERSION@ (the
directory .config/GIMP/@GIMP_APP_VERSION@ in the user's home directory) to
~/.config/DIR/@GIMP_APP_VERSION@.
If DIR is an absolute path, the directory will be changed to DIR.
-Dshmem-type=[none|sysv|posix|win32|auto]. This option allows you to
specify how image data is transported between the core and plug-ins.
Usually the best way to do this is detected automatically.
-Daa=disabled The AA plug-in needs libaa and configure checks for
its presence. Use -Daa=disabled if you run into problems.
-Dxpm=disabled The XPM plug-in needs libxpm and configure checks
for its presence. If for some reason you don't want to build the
XPM plug-in even though the library is installed, use
-Dxpm=disabled to disable it explicitly.
-Dmng=disabled The MNG plug-in needs libmng and configure checks
for its presence. If for some reason you don't want to build the
MNG plug-in even though the library is installed, use
-Dmng=disabled to disable it explicitly.
-Dwmf=disabled The WMF plug-in needs libwmf2 and configure checks for
its presence. Use -Dwmf=disabled if you run into problems.
-Dwebkit-unmaintained=true We do not recommend to install the Help
browser and Webpage plug-ins anymore. If for some reason you want
these anyway, you can force the build with this explicit option.
-Dprint=false If for some reason you don't want to build the Print
plug-in based on the GtkPrint API, you can build with -Dprint=false.
-Dalsa=disabled If you don't want to compile ALSA support into the
MIDI input controller module, you can use the -Dalsa=disabled option.
2010-06-02 02:45:46 +08:00
-Dlinux-input=disabled If you don't want to compile the Linux Input
controller module, you can use the -Dlinux-input=disabled option.
-Dgi-docgen=enabled|disabled This option controls whether the libgimp
C API references will be created using gi-docgen.
-Dg-ir-doc=true This option controls whether the libgimp API
references for some binding languages will be created using
g-ir-doc-tool and yelp-build.
-Denable-multiproc=false This option allows you to disable support for
multiple processors. It is enabled by default.
2000-01-02 04:07:16 +08:00
-Dwith-sendmail[=PATH] This option is used to tell GIMP to send email
through sendmail instead of xdg-email. You can optionally indicate
where to find the sendmail command. Otherwise sendmail will simply
be searched in your $PATH at runtime.
-Denable-default-bin=false Use this option if you don't want to make
gimp-@GIMP_APP_VERSION@ the default GIMP installation. Otherwise a link called
gimp pointing to the gimp-@GIMP_APP_VERSION@ executable will be installed.
-Denable-console-bin=false Use this option if you don't want the
gimp-console binary to be built in addition to the standard binary.
gimp-console is useful for command-line batch mode or as a server.
-Djavascript=false If for some reason you don't want to install the
JavaScript plug-ins, you can use -Djavascript=false.
-Dlua=false If for some reason you don't want to install the
Lua plug-ins, you can use -Dlua=false.
-Dvala-plugins=disabled If for some reason you don't want to install the
Vala plug-ins, you can use -Dvala-plugins=disabled.
This list is manually maintained. To get an exhaustive listing of options,
read `meson_options.txt'.
Additionally meson supports a wide range of common built-in options. See
documentation: https://mesonbuild.com/Builtin-options.html
The `ninja' command builds several things:
- A bunch of public libraries in the directories starting with 'libgimp'.
- The plug-in programs in the 'plug-ins' directory.
- Some modules in the 'modules' subdirectory.
- The main GIMP program 'gimp-@GIMP_APP_VERSION@' in `app'.
1997-11-25 06:05:25 +08:00
The `ninja install' command installs the GIMP header files associated
2009-05-13 16:19:52 +08:00
with the libgimp libraries, the plug-ins, some data files and the GIMP
executable. After running `ninja install' and assuming the build process
2001-11-13 12:13:58 +08:00
was successful you should be able to run `gimp'.
1997-11-25 06:05:25 +08:00
2000-01-02 04:07:16 +08:00
When configure fails
======================
The configuration step uses pkg-config, a tool that replaces the old foo-config
2009-05-13 16:19:52 +08:00
scripts. The most recent version is available from
https://www.freedesktop.org/software/pkgconfig/
'configure' tries to compile and run a short GTK program. There are
several reasons why this might fail:
* pkg-config could not find the file 'gtk+-3.0.pc' that gets installed
with GTK. (This file is used to get information about where GTK+ is
installed.)
2009-05-13 16:19:52 +08:00
Fix: Either make sure that this file is in the path where pkg-config
looks for it (try 'pkg-config --debug' or add the location of
gtk+-3.0.pc to the environment variable PKG_CONFIG_PATH before running
configure.
2009-05-13 16:19:52 +08:00
* Libraries you installed are not found when you attempt to start GIMP.
The details of how to fix this problem will depend on the system:
On Linux and other systems using ELF libraries, add the directory to
holding the library to /etc/ld.so.conf or to the environment variable
LD_LIBRARY_PATH, and run 'ldconfig'.
On other systems, it may be necessary to encode this path
into the executable, by setting the LDFLAGS environment variable
before running configure. For example:
LDFLAGS="-R/home/joe/lib" ./configure
or
LDFLAGS="-Wl,-rpath -Wl,/home/joe/lib" ./configure
* An old version of the GTK libraries was found instead of
your newly installed version. This commonly happens if a
binary package of GTK was previously installed on your system,
and you later compiled GTK from source.
Fix: Remove the old libraries and include files. If you are afraid
that removing the old libraries may break other packages supplied by
your distributor, you can try installing GLib, GTK and other
libraries in a different prefix after setting the environment
variable PKG_CONFIG_LIBDIR to point to lib/pkgconfig/ in that new
prefix so that it does not try to read the *.pc files from the
default directory (/usr/lib/pkgconfig). However, removing the old
packages is often the easier solution.
A detailed log of the meson output is written to the file meson-logs/meson-log.txt.
This may help diagnose problems.
When meson configure fails on plug-ins
======================================
2009-05-13 16:19:52 +08:00
There are some GIMP plug-ins that need additional third-party libraries
installed on your system. For example to compile the plug-ins that load
and save JPEG, PNG or TIFF files you need the related libraries and header
files installed, otherwise you'll get a message that plug-in xyz will not
be built.
If you are sure that those libraries are correctly installed, but configure
fails to detect them, the following might help:
Set your LDFLAGS environment variable to look for the library in a certain
place, e.g. if you are working in a bash shell you would say:
export LDFLAGS="-L<path_to_library> -L<path_to_another_one>"
before you run configure.
Set your CPPFLAGS environment variable to look for the header file in a
certain place, e.g. if you are working in a bash shell you would say:
export CPPFLAGS="-I<path_to_header_file> -I<path_to_another_one>"
before you run meson.