gimp/libgimp/gimplayer_pdb.c

/* LIBGIMP - The GIMP Library
 * Copyright (C) 1995-2003 Peter Mattis and Spencer Kimball
 *
 * gimplayer_pdb.c
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the
 * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
 * Boston, MA 02111-1307, USA.
 */

/* NOTE: This file is autogenerated by pdbgen.pl */

#include "config.h"

#include "gimp.h"

/**
 * _gimp_layer_new:
 * @image_ID: The image to which to add the layer.
 * @width: The layer width.
 * @height: The layer height.
 * @type: The layer type.
 * @name: The layer name.
 * @opacity: The layer opacity.
 * @mode: The layer combination mode.
 *
 * Create a new layer.
 *
 * This procedure creates a new layer with the specified width, height,
 * and type. Name, opacity, and mode are also supplied parameters. The
 * new layer still needs to be added to the image, as this is not
 * automatic. Add the new layer with the gimp_image_add_layer()
 * command. Other attributes such as layer mask modes, and offsets
 * should be set with explicit procedure calls.
 *
 * Returns: The newly created layer.
 */
gint32
_gimp_layer_new (gint32                image_ID,
                 gint                  width,
                 gint                  height,
                 GimpImageType         type,
                 const gchar          *name,
                 gdouble               opacity,
                 GimpLayerModeEffects  mode)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gint32 layer_ID = -1;

  return_vals = gimp_run_procedure ("gimp-layer-new",
                                    &nreturn_vals,
                                    GIMP_PDB_IMAGE, image_ID,
                                    GIMP_PDB_INT32, width,
                                    GIMP_PDB_INT32, height,
                                    GIMP_PDB_INT32, type,
                                    GIMP_PDB_STRING, name,
                                    GIMP_PDB_FLOAT, opacity,
                                    GIMP_PDB_INT32, mode,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    layer_ID = return_vals[1].data.d_layer;

  gimp_destroy_params (return_vals, nreturn_vals);

  return layer_ID;
}

/**
 * gimp_layer_new_from_drawable:
 * @drawable_ID: The source drawable from where the new layer is copied.
 * @dest_image_ID: The destination image to which to add the layer.
 *
 * Create a new layer by copying an existing drawable.
 *
 * This procedure creates a new layer as a copy of the specified
 * drawable. The new layer still needs to be added to the image, as
 * this is not automatic. Add the new layer with the
 * gimp_image_add_layer() command. Other attributes such as layer mask
 * modes, and offsets should be set with explicit procedure calls.
 *
 * Returns: The newly copied layer.
 */
gint32
gimp_layer_new_from_drawable (gint32 drawable_ID,
                              gint32 dest_image_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gint32 layer_copy_ID = -1;

  return_vals = gimp_run_procedure ("gimp-layer-new-from-drawable",
                                    &nreturn_vals,
                                    GIMP_PDB_DRAWABLE, drawable_ID,
                                    GIMP_PDB_IMAGE, dest_image_ID,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    layer_copy_ID = return_vals[1].data.d_layer;

  gimp_destroy_params (return_vals, nreturn_vals);

  return layer_copy_ID;
}

/**
 * _gimp_layer_copy:
 * @layer_ID: The layer to copy.
 * @add_alpha: Add an alpha channel to the copied layer.
 *
 * Copy a layer.
 *
 * This procedure copies the specified layer and returns the copy. The
 * newly copied layer is for use within the original layer's image. It
 * should not be subsequently added to any other image. The copied
 * layer can optionally have an added alpha channel. This is useful if
 * the background layer in an image is being copied and added to the
 * same image.
 *
 * Returns: The newly copied layer.
 */
gint32
_gimp_layer_copy (gint32   layer_ID,
                  gboolean add_alpha)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gint32 layer_copy_ID = -1;

  return_vals = gimp_run_procedure ("gimp-layer-copy",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, add_alpha,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    layer_copy_ID = return_vals[1].data.d_layer;

  gimp_destroy_params (return_vals, nreturn_vals);

  return layer_copy_ID;
}

/**
 * gimp_layer_add_alpha:
 * @layer_ID: The layer.
 *
 * Add an alpha channel to the layer if it doesn't already have one.
 *
 * This procedure adds an additional component to the specified layer
 * if it does not already possess an alpha channel. An alpha channel
 * makes it possible to move a layer from the bottom of the layer stack
 * and to clear and erase to transparency, instead of the background
 * color. This transforms images of type RGB to RGBA, GRAY to GRAYA,
 * and INDEXED to INDEXEDA.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_add_alpha (gint32 layer_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-add-alpha",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_scale:
 * @layer_ID: The layer.
 * @new_width: New layer width.
 * @new_height: New layer height.
 * @local_origin: Use a local origin (as opposed to the image origin).
 *
 * Scale the layer to the specified extents.
 *
 * This procedure scales the layer so that its new width and height are
 * equal to the supplied parameters. The 'local-origin' parameter
 * specifies whether to scale from the center of the layer, or from the
 * image origin. This operation only works if the layer has been added
 * to an image.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_scale (gint32   layer_ID,
                  gint     new_width,
                  gint     new_height,
                  gboolean local_origin)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-scale",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, new_width,
                                    GIMP_PDB_INT32, new_height,
                                    GIMP_PDB_INT32, local_origin,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_resize:
 * @layer_ID: The layer.
 * @new_width: New layer width.
 * @new_height: New layer height.
 * @offx: x offset between upper left corner of old and new layers: (old - new).
 * @offy: y offset between upper left corner of old and new layers: (old - new).
 *
 * Resize the layer to the specified extents.
 *
 * This procedure resizes the layer so that its new width and height
 * are equal to the supplied parameters. Offsets are also provided
 * which describe the position of the previous layer's content. This
 * operation only works if the layer has been added to an image.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_resize (gint32 layer_ID,
                   gint   new_width,
                   gint   new_height,
                   gint   offx,
                   gint   offy)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-resize",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, new_width,
                                    GIMP_PDB_INT32, new_height,
                                    GIMP_PDB_INT32, offx,
                                    GIMP_PDB_INT32, offy,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_resize_to_image_size:
 * @layer_ID: The layer to resize.
 *
 * Resize a layer to the image size.
 *
 * This procedure resizes the layer so that it's new width and height
 * are equal to the width and height of its image container.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_resize_to_image_size (gint32 layer_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-resize-to-image-size",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_translate:
 * @layer_ID: The layer.
 * @offx: Offset in x direction.
 * @offy: Offset in y direction.
 *
 * Translate the layer by the specified offsets.
 *
 * This procedure translates the layer by the amounts specified in the
 * x and y arguments. These can be negative, and are considered offsets
 * from the current position. This command only works if the layer has
 * been added to an image. All additional layers contained in the image
 * which have the linked flag set to TRUE w ill also be translated by
 * the specified offsets.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_translate (gint32 layer_ID,
                      gint   offx,
                      gint   offy)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-translate",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, offx,
                                    GIMP_PDB_INT32, offy,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_set_offsets:
 * @layer_ID: The layer.
 * @offx: Offset in x direction.
 * @offy: Offset in y direction.
 *
 * Set the layer offsets.
 *
 * This procedure sets the offsets for the specified layer. The offsets
 * are relative to the image origin and can be any values. This
 * operation is valid only on layers which have been added to an image.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_set_offsets (gint32 layer_ID,
                        gint   offx,
                        gint   offy)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-set-offsets",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, offx,
                                    GIMP_PDB_INT32, offy,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_create_mask:
 * @layer_ID: The layer to which to add the mask.
 * @mask_type: The type of mask.
 *
 * Create a layer mask for the specified specified layer.
 *
 * This procedure creates a layer mask for the specified layer. Layer
 * masks serve as an additional alpha channel for a layer. A number of
 * ifferent types of masks are allowed for initialisation: completely
 * white masks (which will leave the layer fully visible), completely
 * black masks (which will give the layer complete transparency, the
 * layer's already existing alpha channel (which will leave the layer
 * fully visible, but which may be more useful than a white mask), the
 * current selection or a grayscale copy of the layer. The layer mask
 * still needs to be added to the layer. This can be done with a call
 * to gimp_layer_add_mask().
 *
 * Returns: The newly created mask.
 */
gint32
gimp_layer_create_mask (gint32          layer_ID,
                        GimpAddMaskType mask_type)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gint32 mask_ID = -1;

  return_vals = gimp_run_procedure ("gimp-layer-create-mask",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, mask_type,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    mask_ID = return_vals[1].data.d_layer_mask;

  gimp_destroy_params (return_vals, nreturn_vals);

  return mask_ID;
}

/**
 * gimp_layer_get_mask:
 * @layer_ID: The layer.
 *
 * Get the specified layer's mask if it exists.
 *
 * This procedure returns the specified layer's mask, or -1 if none
 * exists.
 *
 * Returns: The layer mask.
 */
gint32
gimp_layer_get_mask (gint32 layer_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gint32 mask_ID = -1;

  return_vals = gimp_run_procedure ("gimp-layer-get-mask",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    mask_ID = return_vals[1].data.d_layer_mask;

  gimp_destroy_params (return_vals, nreturn_vals);

  return mask_ID;
}

/**
 * gimp_layer_from_mask:
 * @mask_ID: Mask for which to return the layer.
 *
 * Get the specified mask's layer.
 *
 * This procedure returns the specified mask's layer , or -1 if none
 * exists.
 *
 * Returns: The mask's layer.
 *
 * Since: GIMP 2.2
 */
gint32
gimp_layer_from_mask (gint32 mask_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gint32 layer_ID = -1;

  return_vals = gimp_run_procedure ("gimp-layer-from-mask",
                                    &nreturn_vals,
                                    GIMP_PDB_CHANNEL, mask_ID,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    layer_ID = return_vals[1].data.d_layer;

  gimp_destroy_params (return_vals, nreturn_vals);

  return layer_ID;
}

/**
 * gimp_layer_add_mask:
 * @layer_ID: The layer to receive the mask.
 * @mask_ID: The mask to add to the layer.
 *
 * Add a layer mask to the specified layer.
 *
 * This procedure adds a layer mask to the specified layer. Layer masks
 * serve as an additional alpha channel for a layer. This procedure
 * will fail if a number of prerequisites aren't met. The layer cannot
 * already have a layer mask. The specified mask must exist and have
 * the same dimensions as the layer. Both the mask and the layer must
 * have been created for use with the specified image.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_add_mask (gint32 layer_ID,
                     gint32 mask_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-add-mask",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_CHANNEL, mask_ID,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_remove_mask:
 * @layer_ID: The layer from which to remove mask.
 * @mode: Removal mode.
 *
 * Remove the specified layer mask from the layer.
 *
 * This procedure removes the specified layer mask from the layer. If
 * the mask doesn't exist, an error is returned.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_remove_mask (gint32            layer_ID,
                        GimpMaskApplyMode mode)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-remove-mask",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, mode,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_is_floating_sel:
 * @layer_ID: The layer.
 *
 * Is the specified layer a floating selection?
 *
 * This procedure returns whether the layer is a floating selection.
 * Floating selections are special cases of layers which are attached
 * to a specific drawable.
 *
 * Returns: TRUE if the layer is a floating selection.
 */
gboolean
gimp_layer_is_floating_sel (gint32 layer_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean is_floating_sel = FALSE;

  return_vals = gimp_run_procedure ("gimp-layer-is-floating-sel",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    is_floating_sel = return_vals[1].data.d_int32;

  gimp_destroy_params (return_vals, nreturn_vals);

  return is_floating_sel;
}

/**
 * gimp_layer_get_lock_alpha:
 * @layer_ID: The layer.
 *
 * Get the lock alpha channel setting of the specified layer.
 *
 * This procedure returns the specified layer's lock alpha channel
 * setting.
 *
 * Returns: The layer's lock alpha channel setting.
 */
gboolean
gimp_layer_get_lock_alpha (gint32 layer_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean lock_alpha = FALSE;

  return_vals = gimp_run_procedure ("gimp-layer-get-lock-alpha",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    lock_alpha = return_vals[1].data.d_int32;

  gimp_destroy_params (return_vals, nreturn_vals);

  return lock_alpha;
}

/**
 * gimp_layer_set_lock_alpha:
 * @layer_ID: The layer.
 * @lock_alpha: The new layer's lock alpha channel setting.
 *
 * Set the lock alpha channel setting of the specified layer.
 *
 * This procedure sets the specified layer's lock alpha channel
 * setting.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_set_lock_alpha (gint32   layer_ID,
                           gboolean lock_alpha)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-set-lock-alpha",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, lock_alpha,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_get_apply_mask:
 * @layer_ID: The layer.
 *
 * Get the apply mask setting of the specified layer.
 *
 * This procedure returns the specified layer's apply mask setting. If
 * the value is TRUE, then the layer mask for this layer is currently
 * being composited with the layer's alpha channel.
 *
 * Returns: The layer's apply mask setting.
 */
gboolean
gimp_layer_get_apply_mask (gint32 layer_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean apply_mask = FALSE;

  return_vals = gimp_run_procedure ("gimp-layer-get-apply-mask",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    apply_mask = return_vals[1].data.d_int32;

  gimp_destroy_params (return_vals, nreturn_vals);

  return apply_mask;
}

/**
 * gimp_layer_set_apply_mask:
 * @layer_ID: The layer.
 * @apply_mask: The new layer's apply mask setting.
 *
 * Set the apply mask setting of the specified layer.
 *
 * This procedure sets the specified layer's apply mask setting. This
 * controls whether the layer's mask is currently affecting the alpha
 * channel. If there is no layer mask, this function will return an
 * error.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_set_apply_mask (gint32   layer_ID,
                           gboolean apply_mask)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-set-apply-mask",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, apply_mask,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_get_show_mask:
 * @layer_ID: The layer.
 *
 * Get the show mask setting of the specified layer.
 *
 * This procedure returns the specified layer's show mask setting. This
 * controls whether the layer or its mask is visible. TRUE indicates
 * that the mask should be visible. If the layer has no mask, then this
 * function returns an error.
 *
 * Returns: The layer's show mask setting.
 */
gboolean
gimp_layer_get_show_mask (gint32 layer_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean show_mask = FALSE;

  return_vals = gimp_run_procedure ("gimp-layer-get-show-mask",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    show_mask = return_vals[1].data.d_int32;

  gimp_destroy_params (return_vals, nreturn_vals);

  return show_mask;
}

/**
 * gimp_layer_set_show_mask:
 * @layer_ID: The layer.
 * @show_mask: The new layer's show mask setting.
 *
 * Set the show mask setting of the specified layer.
 *
 * This procedure sets the specified layer's show mask setting. This
 * controls whether the layer's mask is currently affecting the alpha
 * channel. If there is no layer mask, this function will return an
 * error.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_set_show_mask (gint32   layer_ID,
                          gboolean show_mask)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-set-show-mask",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, show_mask,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_get_edit_mask:
 * @layer_ID: The layer.
 *
 * Get the edit mask setting of the specified layer.
 *
 * This procedure returns the specified layer's edit mask setting. If
 * the value is TRUE, then the layer mask for this layer is currently
 * active, and not the layer.
 *
 * Returns: The layer's edit mask setting.
 */
gboolean
gimp_layer_get_edit_mask (gint32 layer_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean edit_mask = FALSE;

  return_vals = gimp_run_procedure ("gimp-layer-get-edit-mask",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    edit_mask = return_vals[1].data.d_int32;

  gimp_destroy_params (return_vals, nreturn_vals);

  return edit_mask;
}

/**
 * gimp_layer_set_edit_mask:
 * @layer_ID: The layer.
 * @edit_mask: The new layer's edit mask setting.
 *
 * Set the edit mask setting of the specified layer.
 *
 * This procedure sets the specified layer's edit mask setting. This
 * controls whether the layer or it's mask is currently active for
 * editing. If the specified layer has no layer mask, then this
 * procedure will return an error.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_set_edit_mask (gint32   layer_ID,
                          gboolean edit_mask)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-set-edit-mask",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, edit_mask,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_get_opacity:
 * @layer_ID: The layer.
 *
 * Get the opacity of the specified layer.
 *
 * This procedure returns the specified layer's opacity.
 *
 * Returns: The layer opacity.
 */
gdouble
gimp_layer_get_opacity (gint32 layer_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gdouble opacity = 0.0;

  return_vals = gimp_run_procedure ("gimp-layer-get-opacity",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    opacity = return_vals[1].data.d_float;

  gimp_destroy_params (return_vals, nreturn_vals);

  return opacity;
}

/**
 * gimp_layer_set_opacity:
 * @layer_ID: The layer.
 * @opacity: The new layer opacity.
 *
 * Set the opacity of the specified layer.
 *
 * This procedure sets the specified layer's opacity.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_set_opacity (gint32  layer_ID,
                        gdouble opacity)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-set-opacity",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_FLOAT, opacity,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}

/**
 * gimp_layer_get_mode:
 * @layer_ID: The layer.
 *
 * Get the combination mode of the specified layer.
 *
 * This procedure returns the specified layer's combination mode.
 *
 * Returns: The layer combination mode.
 */
GimpLayerModeEffects
gimp_layer_get_mode (gint32 layer_ID)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  GimpLayerModeEffects mode = 0;

  return_vals = gimp_run_procedure ("gimp-layer-get-mode",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_END);

  if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS)
    mode = return_vals[1].data.d_int32;

  gimp_destroy_params (return_vals, nreturn_vals);

  return mode;
}

/**
 * gimp_layer_set_mode:
 * @layer_ID: The layer.
 * @mode: The new layer combination mode.
 *
 * Set the combination mode of the specified layer.
 *
 * This procedure sets the specified layer's combination mode.
 *
 * Returns: TRUE on success.
 */
gboolean
gimp_layer_set_mode (gint32               layer_ID,
                     GimpLayerModeEffects mode)
{
  GimpParam *return_vals;
  gint nreturn_vals;
  gboolean success = TRUE;

  return_vals = gimp_run_procedure ("gimp-layer-set-mode",
                                    &nreturn_vals,
                                    GIMP_PDB_LAYER, layer_ID,
                                    GIMP_PDB_INT32, mode,
                                    GIMP_PDB_END);

  success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS;

  gimp_destroy_params (return_vals, nreturn_vals);

  return success;
}