gimp/gimprc.win32

262 lines
9.7 KiB
Plaintext
Raw Normal View History

# This is the system-wide gimprc file. Any change made in this file
# will affect all users of this system, provided that they are not
# overriding the default values in their personal gimprc file.
#
# Lines that start with a '#' are comments.
# Blank lines are ignored.
# The variable gimp_dir refers to your personal gimp directory. It is
# set to either the value _gimp1.1 or the value of the environment
# variable GIMP_DIRECTORY. If the path in gimp_dir is relative, it is
# considered relative to your home directory (value of environment
# variable %HOME%, or %HOMEDRIVE%:%HOMEPATH%). If you don't have a
# home directory (typical on Windows systems), gimp_dir refers to
# directory in the GIMP installation directory.
# The variable gimp_install_dir is set to the directory where the gimp
# was installed.
(exec_prefix "${gimp_install_dir}\\bin")
(gimp_data_dir "${gimp_install_dir}")
(gimp_plugin_dir "${gimp_install_dir}")
# Set the temporary storage directory...files will appear here
# during the course of running the gimp. Most files will disappear
# when the gimp exits, but some files are likely to remain,
# such as working palette files, so it is best if this directory
# not be one that is shared by other users.
(temp-path "${TEMP}")
# Set the swap file location. The gimp uses a tile based memory
# allocation scheme. The swap file is used to quickly and easily
# swap files out to disk and back in. Be aware that the swap file
# can easily get very large if the gimp is used with large images.
# Also, things can get horribly slow if the swap file is created on
# a directory that is shared over a network. For these reasons, it may
# be desirable to put your swap file in your %TEMP% directory.
(swap-path "${TEMP}")
# Set the brush search path...this path will be searched for valid
# brushes at startup.
(brush-path "${gimp_dir}\\brushes;${gimp_data_dir}\\brushes")
# Specify a default brush. If none is specified it defaults to the
# "1circle.gbr" brush which is just a single pixel sized brush.
# The brush is searched for in the brush path.
(default-brush "19fcircle.gbr")
# Set the pattern search path...this path will be searched for valid
# patterns at startup.
(pattern-path "${gimp_dir}\\patterns;${gimp_data_dir}\\patterns")
# Specify a default pattern.
# The pattern is searched for in the specified pattern paths.
(default-pattern "wood2.pat")
# Set the palette search path...this path will be searched for valid
# palettes at startup.
(palette-path "${gimp_dir}\\palettes;${gimp_data_dir}\\palettes")
# Specify a default palette.
# The pattern is searched for in the specified pattern paths.
(default-palette "Default")
# Set the gradient search path...this path will be searched for valid
# gradients at startup.
(gradient-path "${gimp_dir}\\gradients;${gimp_data_dir}\\gradients")
# Specify a default gradient.
# The gradient is searched for in the specified gradient paths.
(default-gradient "German_flag_smooth")
# Set the plug-in search path...this path will be searched for
# plug-ins when the plug-in is run.
(plug-in-path "${gimp_dir}\\plug-ins;${gimp_dir}\\plug-ins\\script-fu;${gimp_plugin_dir}\\plug-ins")
# Set the path for the script-fu plug-in. This value is ignored by
# the GIMP if the script-fu plug-in is never run.
(script-fu-path "${gimp_dir}\\scripts;${gimp_data_dir}\\scripts")
# Set the path to modules that are to be initialized at startup
(module-path "${gimp_dir}\\modules;${gimp_plugin_dir}\\modules")
# The tile cache is used to make sure the gimp doesn't thrash
# tiles between memory and disk. Setting this value higher will
# cause the gimp to use less swap space, but will also cause
# the gimp to use more memory. Conversely, a smaller cache size
# causes the gimp to use more swap space and less memory.
# Note: the gimp will still run even if `tile-cache-size' is
# set to 0. The actual size can contain a suffix of 'm', 'M',
# 'k', 'K', 'b' or 'B', which makes the gimp interpret the
# size as being specified in megabytes, kilobytes and bytes
# respectively. If no suffix is specified the size defaults to
# being specified in kilobytes.
(tile-cache-size 10m)
# Speed of marching ants in the selection outline
# this value is in milliseconds
# (less time indicates faster marching)
(marching-ants-speed 300)
# Set the number of operations kept on the undo stack
(undo-levels 5)
# Set the color-cube resource for dithering on 8-bit displays
# The 4 values stand for Shades of red, green, blue and grays
# Multiplying the # of shades of each primary color yields
# the total number of colors that will be allocated from the
# gimp colormap. This number should not exceed 256. Most of the
# colors remaining after the allocation of the colorcube
# will be left to the system palette in an effort to reduce
# colormap "flashing".
(color-cube 6 6 4 24)
# Install a GIMP colormap by default -- only for 8-bit displays
# (install-colormap)
# Specify that marching ants for selected regions will be drawn
# with colormap cycling as oposed to redrawing with different stipple masks
# this color cycling option works only with 8-bit displays
# (colormap-cycling)
# Tools such as fuzzy-select and bucket fill find regions based on a
# seed-fill algorithm. The seed fill starts at the intially selected
# pixel and progresses in all directions until the difference of pixel
# intensity from the original is greater than a specified threshold
# ==> This value represents the default threshold
(default-threshold 15)
# There is always a tradeoff between memory usage and speed. In most
# cases, the GIMP opts for speed over memory. However, if memory is
# a big issue, set stingy-memory-use
# (stingy-memory-use)
# When zooming into and out of images, this option enables the
# automatic resizing of windows
# (allow-resize-windows)
# Context-dependent cursors are cool. They are enabled by default.
# However, they require overhead that you may want to do without.
# Uncomment this line to disable them.
# (no-cursor-updating)
# Layer preview sizes:
# none: no previews in layers dialog/layer selector
# small: 32x32
# medium: 64x64
# large: 128x128
# #: #x#
(preview-size small)
# Tooltips
# Comment this out to disable the tooltips in the toolbox
# (dont-show-tool-tips)
# Controlling ruler visibility
# The default behavior is for rulers to be ON.
# This can also be toggled with the View->Toggle Rulers command
# or shift+control+r
# (dont-show-rulers)
# Default units
# This is the default unit of a new image. It will appear in the
# File/New dialog and will be the unit for coordinate display when
# dot-for-dot is off.
# The default units can be one of:
# (inches millimeters points picas) plus those in your user units database
# The default is inches
(default-units inches)
# Default Resolution units
# This is used to specify the resolution of a new image
# The units for the resolution can be one of:
# (inches millimeters points picas) plus those in your user units database
# The default is inches
(default-resolution-units inches)
# Default Resolution
# This is the default resolution of a new image in dpi
# The default is 72.0 dpi in both x and y direction
(default-xresolution 72.0)
(default-yresolution 72.0)
# Controlling statusbar visibility
# The default behavior is to show the statusbar.
# This can also be toggled with the View->Toggle Statusbar command
# or shift+control+s
# (dont-show-statusbar)
# Disable auto saving
# Auto saving is not yet implemented! Nothing will be auto-saved, no matter
# how you set this here.
# Just uncomment the line below...
# (dont-auto-save)
# Disable confirmation before closing an image without saving
# Just uncomment the next line
# (dont-confirm-on-close)
# By default GIMP remembers the positions and sizes of the main dialogs and
# advices your window-manager to place them there again the next time you
# use the GIMP. To disable this behaviour, uncomment the line below...
# (dont-save-session-info)
# To let GIMP try to restore your last saved session,
# uncomment the line below...
# (always-restore-session)
# Setting the level of interpolation
# Uncommenting this line will enable cubic interpolation.
# By default, GIMP uses linear interpolation, which is faster, but has poorer quality
# (cubic-interpolation)
# Set the gamma correction values for the display
# 1.0 corresponds to no gamma correction. For most displays,
# gamma correction should be set to between 2.0 and 2.6
# Run the utility "gamma_correct" to determine appropriate values
# for your display.
#
# One important item to keep in mind: Many images that you might
# get from outside sources will in all likelihood already be
# gamma-corrected. In these cases, the image will look washed-out
# if the gimp has gamma-correction turned on. If you are going
# to work with images of this sort, turn gamma correction off
# by removing this line, or setting the values to 1.0.
# gamma-correction 1.0
# gamma-correction 2.0
# ___
(gamma-correction 1.0)
# Set the manner in which transparency is displayed in images
# Transparency type can be one of:
# 0: Light Checks
# 1: Mid-Tone Checks
# 2: Dark Checks
# 3: White Only
# 4: Gray Only
# 5: Black Only
# Check size can be one of:
# 0: Small
# 1: Medium
# 2: Large
(transparency-type 1)
(transparency-size 2)
# gfig pattern directory
(gfig-path "${gimp_dir}\\gfig;${gimp_data_dir}\\gfig")
# This string sets how image window titles are formatted.
# The following percent expansions are performed:
# %% literal percent sign
# %f bare filename, or "Untiltled"
# %F full path to file
# %p PDB image id
# %i view instance number
# %t image type (RGB, indexed, greyscale)
# %z zoom factor as a percentage
# %s source scale factor
# %d destination scale factor
(image-title-format "%f-%p.%i (%t) %z%%")
# [end of file]