Update README.md
This commit is contained in:
parent
7152cd1c52
commit
ec8e908bb2
|
@ -24,7 +24,7 @@ Check out if your MacBook is supported on our [FAQ page](https://apphousekitchen
|
|||
You can download the app from GitHub: <https://github.com/davidwernhart/AlDente/releases>
|
||||
|
||||
## Installation Guide
|
||||
An installation guide can be found on our website: https://apphousekitchen.com/installation-guide/
|
||||
An installation guide can be found on our website:[Installation Guide](https://apphousekitchen.com/installation-guide/)
|
||||
|
||||
## How to use
|
||||
When the installation is finished, enter your desired max. charging percentage by clicking on the 🍝 icon on your menu bar. Usually, the operating system will take a minute or two registering the changes, so be patient. You can check if it's working by setting the max. percentage to e.g.: 80%. After a while, clicking on your battery icon will report "Battery is not charging" if you have more than ≈73% left, even though your charger is connected. Notice that in this state, your MacBook is still powered by the charger, but the battery is not charging anymore.
|
||||
|
@ -32,7 +32,7 @@ When the installation is finished, enter your desired max. charging percentage b
|
|||
IMPORTANT: Keeping your battery at a lower percentage, such as under 80%, over weeks without doing full cycles (100%-0%) can result in a disturbed battery calibration. When this happens, your Macbook might turn off with 40-50% left or your battery capacity will drop significantly. However, this is only due to a disturbed battery calibration and not because of a faulty or degraded battery. To avoid this issue, we recommend doing at least one full cycle (0%-100%) every two weeks. Even if your battery calibration gets disturbed, doing 4+ full cycles will recalibrate your battery and the capacity will go up again.
|
||||
|
||||
## FAQ's
|
||||
Check out our FAQ's on our website here: https://apphousekitchen.com/faq/
|
||||
Check out our FAQ's on our website [here](https://apphousekitchen.com/faq/).
|
||||
|
||||
## Other tools used in this project:
|
||||
* <https://github.com/beltex/SMCKit>
|
||||
|
|
Loading…
Reference in New Issue