1025 lines
50 KiB
C
1025 lines
50 KiB
C
/* Copyright 2018 Canaan Inc.
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
/**
|
|
* @file
|
|
* @brief Field Programmable GPIO Array (FPIOA)
|
|
*
|
|
* The FPIOA peripheral supports the following features:
|
|
*
|
|
* - 48 IO with 256 functions
|
|
*
|
|
* - Schmitt trigger
|
|
*
|
|
* - Invert input and output
|
|
*
|
|
* - Pull up and pull down
|
|
*
|
|
* - Driving selector
|
|
*
|
|
* - Static input and output
|
|
*
|
|
*/
|
|
|
|
#ifndef _DRIVER_FPIOA_H
|
|
#define _DRIVER_FPIOA_H
|
|
|
|
#include <stdint.h>
|
|
#include "platform.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* clang-format off */
|
|
/* Pad number settings */
|
|
#define FPIOA_NUM_IO (48)
|
|
/* clang-format on */
|
|
|
|
/**
|
|
* @brief FPIOA IO functions
|
|
*
|
|
* @note FPIOA pin function table
|
|
*
|
|
* | Function | Name | Description |
|
|
* |-----------|------------------|-----------------------------------|
|
|
* | 0 | JTAG_TCLK | JTAG Test Clock |
|
|
* | 1 | JTAG_TDI | JTAG Test Data In |
|
|
* | 2 | JTAG_TMS | JTAG Test Mode Select |
|
|
* | 3 | JTAG_TDO | JTAG Test Data Out |
|
|
* | 4 | SPI0_D0 | SPI0 Data 0 |
|
|
* | 5 | SPI0_D1 | SPI0 Data 1 |
|
|
* | 6 | SPI0_D2 | SPI0 Data 2 |
|
|
* | 7 | SPI0_D3 | SPI0 Data 3 |
|
|
* | 8 | SPI0_D4 | SPI0 Data 4 |
|
|
* | 9 | SPI0_D5 | SPI0 Data 5 |
|
|
* | 10 | SPI0_D6 | SPI0 Data 6 |
|
|
* | 11 | SPI0_D7 | SPI0 Data 7 |
|
|
* | 12 | SPI0_SS0 | SPI0 Chip Select 0 |
|
|
* | 13 | SPI0_SS1 | SPI0 Chip Select 1 |
|
|
* | 14 | SPI0_SS2 | SPI0 Chip Select 2 |
|
|
* | 15 | SPI0_SS3 | SPI0 Chip Select 3 |
|
|
* | 16 | SPI0_ARB | SPI0 Arbitration |
|
|
* | 17 | SPI0_SCLK | SPI0 Serial Clock |
|
|
* | 18 | UARTHS_RX | UART High speed Receiver |
|
|
* | 19 | UARTHS_TX | UART High speed Transmitter |
|
|
* | 20 | RESV6 | Reserved function |
|
|
* | 21 | RESV7 | Reserved function |
|
|
* | 22 | CLK_SPI1 | Clock SPI1 |
|
|
* | 23 | CLK_I2C1 | Clock I2C1 |
|
|
* | 24 | GPIOHS0 | GPIO High speed 0 |
|
|
* | 25 | GPIOHS1 | GPIO High speed 1 |
|
|
* | 26 | GPIOHS2 | GPIO High speed 2 |
|
|
* | 27 | GPIOHS3 | GPIO High speed 3 |
|
|
* | 28 | GPIOHS4 | GPIO High speed 4 |
|
|
* | 29 | GPIOHS5 | GPIO High speed 5 |
|
|
* | 30 | GPIOHS6 | GPIO High speed 6 |
|
|
* | 31 | GPIOHS7 | GPIO High speed 7 |
|
|
* | 32 | GPIOHS8 | GPIO High speed 8 |
|
|
* | 33 | GPIOHS9 | GPIO High speed 9 |
|
|
* | 34 | GPIOHS10 | GPIO High speed 10 |
|
|
* | 35 | GPIOHS11 | GPIO High speed 11 |
|
|
* | 36 | GPIOHS12 | GPIO High speed 12 |
|
|
* | 37 | GPIOHS13 | GPIO High speed 13 |
|
|
* | 38 | GPIOHS14 | GPIO High speed 14 |
|
|
* | 39 | GPIOHS15 | GPIO High speed 15 |
|
|
* | 40 | GPIOHS16 | GPIO High speed 16 |
|
|
* | 41 | GPIOHS17 | GPIO High speed 17 |
|
|
* | 42 | GPIOHS18 | GPIO High speed 18 |
|
|
* | 43 | GPIOHS19 | GPIO High speed 19 |
|
|
* | 44 | GPIOHS20 | GPIO High speed 20 |
|
|
* | 45 | GPIOHS21 | GPIO High speed 21 |
|
|
* | 46 | GPIOHS22 | GPIO High speed 22 |
|
|
* | 47 | GPIOHS23 | GPIO High speed 23 |
|
|
* | 48 | GPIOHS24 | GPIO High speed 24 |
|
|
* | 49 | GPIOHS25 | GPIO High speed 25 |
|
|
* | 50 | GPIOHS26 | GPIO High speed 26 |
|
|
* | 51 | GPIOHS27 | GPIO High speed 27 |
|
|
* | 52 | GPIOHS28 | GPIO High speed 28 |
|
|
* | 53 | GPIOHS29 | GPIO High speed 29 |
|
|
* | 54 | GPIOHS30 | GPIO High speed 30 |
|
|
* | 55 | GPIOHS31 | GPIO High speed 31 |
|
|
* | 56 | GPIO0 | GPIO pin 0 |
|
|
* | 57 | GPIO1 | GPIO pin 1 |
|
|
* | 58 | GPIO2 | GPIO pin 2 |
|
|
* | 59 | GPIO3 | GPIO pin 3 |
|
|
* | 60 | GPIO4 | GPIO pin 4 |
|
|
* | 61 | GPIO5 | GPIO pin 5 |
|
|
* | 62 | GPIO6 | GPIO pin 6 |
|
|
* | 63 | GPIO7 | GPIO pin 7 |
|
|
* | 64 | UART1_RX | UART1 Receiver |
|
|
* | 65 | UART1_TX | UART1 Transmitter |
|
|
* | 66 | UART2_RX | UART2 Receiver |
|
|
* | 67 | UART2_TX | UART2 Transmitter |
|
|
* | 68 | UART3_RX | UART3 Receiver |
|
|
* | 69 | UART3_TX | UART3 Transmitter |
|
|
* | 70 | SPI1_D0 | SPI1 Data 0 |
|
|
* | 71 | SPI1_D1 | SPI1 Data 1 |
|
|
* | 72 | SPI1_D2 | SPI1 Data 2 |
|
|
* | 73 | SPI1_D3 | SPI1 Data 3 |
|
|
* | 74 | SPI1_D4 | SPI1 Data 4 |
|
|
* | 75 | SPI1_D5 | SPI1 Data 5 |
|
|
* | 76 | SPI1_D6 | SPI1 Data 6 |
|
|
* | 77 | SPI1_D7 | SPI1 Data 7 |
|
|
* | 78 | SPI1_SS0 | SPI1 Chip Select 0 |
|
|
* | 79 | SPI1_SS1 | SPI1 Chip Select 1 |
|
|
* | 80 | SPI1_SS2 | SPI1 Chip Select 2 |
|
|
* | 81 | SPI1_SS3 | SPI1 Chip Select 3 |
|
|
* | 82 | SPI1_ARB | SPI1 Arbitration |
|
|
* | 83 | SPI1_SCLK | SPI1 Serial Clock |
|
|
* | 84 | SPI_SLAVE_D0 | SPI Slave Data 0 |
|
|
* | 85 | SPI_SLAVE_SS | SPI Slave Select |
|
|
* | 86 | SPI_SLAVE_SCLK | SPI Slave Serial Clock |
|
|
* | 87 | I2S0_MCLK | I2S0 Master Clock |
|
|
* | 88 | I2S0_SCLK | I2S0 Serial Clock(BCLK) |
|
|
* | 89 | I2S0_WS | I2S0 Word Select(LRCLK) |
|
|
* | 90 | I2S0_IN_D0 | I2S0 Serial Data Input 0 |
|
|
* | 91 | I2S0_IN_D1 | I2S0 Serial Data Input 1 |
|
|
* | 92 | I2S0_IN_D2 | I2S0 Serial Data Input 2 |
|
|
* | 93 | I2S0_IN_D3 | I2S0 Serial Data Input 3 |
|
|
* | 94 | I2S0_OUT_D0 | I2S0 Serial Data Output 0 |
|
|
* | 95 | I2S0_OUT_D1 | I2S0 Serial Data Output 1 |
|
|
* | 96 | I2S0_OUT_D2 | I2S0 Serial Data Output 2 |
|
|
* | 97 | I2S0_OUT_D3 | I2S0 Serial Data Output 3 |
|
|
* | 98 | I2S1_MCLK | I2S1 Master Clock |
|
|
* | 99 | I2S1_SCLK | I2S1 Serial Clock(BCLK) |
|
|
* | 100 | I2S1_WS | I2S1 Word Select(LRCLK) |
|
|
* | 101 | I2S1_IN_D0 | I2S1 Serial Data Input 0 |
|
|
* | 102 | I2S1_IN_D1 | I2S1 Serial Data Input 1 |
|
|
* | 103 | I2S1_IN_D2 | I2S1 Serial Data Input 2 |
|
|
* | 104 | I2S1_IN_D3 | I2S1 Serial Data Input 3 |
|
|
* | 105 | I2S1_OUT_D0 | I2S1 Serial Data Output 0 |
|
|
* | 106 | I2S1_OUT_D1 | I2S1 Serial Data Output 1 |
|
|
* | 107 | I2S1_OUT_D2 | I2S1 Serial Data Output 2 |
|
|
* | 108 | I2S1_OUT_D3 | I2S1 Serial Data Output 3 |
|
|
* | 109 | I2S2_MCLK | I2S2 Master Clock |
|
|
* | 110 | I2S2_SCLK | I2S2 Serial Clock(BCLK) |
|
|
* | 111 | I2S2_WS | I2S2 Word Select(LRCLK) |
|
|
* | 112 | I2S2_IN_D0 | I2S2 Serial Data Input 0 |
|
|
* | 113 | I2S2_IN_D1 | I2S2 Serial Data Input 1 |
|
|
* | 114 | I2S2_IN_D2 | I2S2 Serial Data Input 2 |
|
|
* | 115 | I2S2_IN_D3 | I2S2 Serial Data Input 3 |
|
|
* | 116 | I2S2_OUT_D0 | I2S2 Serial Data Output 0 |
|
|
* | 117 | I2S2_OUT_D1 | I2S2 Serial Data Output 1 |
|
|
* | 118 | I2S2_OUT_D2 | I2S2 Serial Data Output 2 |
|
|
* | 119 | I2S2_OUT_D3 | I2S2 Serial Data Output 3 |
|
|
* | 120 | RESV0 | Reserved function |
|
|
* | 121 | RESV1 | Reserved function |
|
|
* | 122 | RESV2 | Reserved function |
|
|
* | 123 | RESV3 | Reserved function |
|
|
* | 124 | RESV4 | Reserved function |
|
|
* | 125 | RESV5 | Reserved function |
|
|
* | 126 | I2C0_SCLK | I2C0 Serial Clock |
|
|
* | 127 | I2C0_SDA | I2C0 Serial Data |
|
|
* | 128 | I2C1_SCLK | I2C1 Serial Clock |
|
|
* | 129 | I2C1_SDA | I2C1 Serial Data |
|
|
* | 130 | I2C2_SCLK | I2C2 Serial Clock |
|
|
* | 131 | I2C2_SDA | I2C2 Serial Data |
|
|
* | 132 | CMOS_XCLK | DVP System Clock |
|
|
* | 133 | CMOS_RST | DVP System Reset |
|
|
* | 134 | CMOS_PWDN | DVP Power Down Mode |
|
|
* | 135 | CMOS_VSYNC | DVP Vertical Sync |
|
|
* | 136 | CMOS_HREF | DVP Horizontal Reference output |
|
|
* | 137 | CMOS_PCLK | Pixel Clock |
|
|
* | 138 | CMOS_D0 | Data Bit 0 |
|
|
* | 139 | CMOS_D1 | Data Bit 1 |
|
|
* | 140 | CMOS_D2 | Data Bit 2 |
|
|
* | 141 | CMOS_D3 | Data Bit 3 |
|
|
* | 142 | CMOS_D4 | Data Bit 4 |
|
|
* | 143 | CMOS_D5 | Data Bit 5 |
|
|
* | 144 | CMOS_D6 | Data Bit 6 |
|
|
* | 145 | CMOS_D7 | Data Bit 7 |
|
|
* | 146 | SCCB_SCLK | SCCB Serial Clock |
|
|
* | 147 | SCCB_SDA | SCCB Serial Data |
|
|
* | 148 | UART1_CTS | UART1 Clear To Send |
|
|
* | 149 | UART1_DSR | UART1 Data Set Ready |
|
|
* | 150 | UART1_DCD | UART1 Data Carrier Detect |
|
|
* | 151 | UART1_RI | UART1 Ring Indicator |
|
|
* | 152 | UART1_SIR_IN | UART1 Serial Infrared Input |
|
|
* | 153 | UART1_DTR | UART1 Data Terminal Ready |
|
|
* | 154 | UART1_RTS | UART1 Request To Send |
|
|
* | 155 | UART1_OUT2 | UART1 User-designated Output 2 |
|
|
* | 156 | UART1_OUT1 | UART1 User-designated Output 1 |
|
|
* | 157 | UART1_SIR_OUT | UART1 Serial Infrared Output |
|
|
* | 158 | UART1_BAUD | UART1 Transmit Clock Output |
|
|
* | 159 | UART1_RE | UART1 Receiver Output Enable |
|
|
* | 160 | UART1_DE | UART1 Driver Output Enable |
|
|
* | 161 | UART1_RS485_EN | UART1 RS485 Enable |
|
|
* | 162 | UART2_CTS | UART2 Clear To Send |
|
|
* | 163 | UART2_DSR | UART2 Data Set Ready |
|
|
* | 164 | UART2_DCD | UART2 Data Carrier Detect |
|
|
* | 165 | UART2_RI | UART2 Ring Indicator |
|
|
* | 166 | UART2_SIR_IN | UART2 Serial Infrared Input |
|
|
* | 167 | UART2_DTR | UART2 Data Terminal Ready |
|
|
* | 168 | UART2_RTS | UART2 Request To Send |
|
|
* | 169 | UART2_OUT2 | UART2 User-designated Output 2 |
|
|
* | 170 | UART2_OUT1 | UART2 User-designated Output 1 |
|
|
* | 171 | UART2_SIR_OUT | UART2 Serial Infrared Output |
|
|
* | 172 | UART2_BAUD | UART2 Transmit Clock Output |
|
|
* | 173 | UART2_RE | UART2 Receiver Output Enable |
|
|
* | 174 | UART2_DE | UART2 Driver Output Enable |
|
|
* | 175 | UART2_RS485_EN | UART2 RS485 Enable |
|
|
* | 176 | UART3_CTS | UART3 Clear To Send |
|
|
* | 177 | UART3_DSR | UART3 Data Set Ready |
|
|
* | 178 | UART3_DCD | UART3 Data Carrier Detect |
|
|
* | 179 | UART3_RI | UART3 Ring Indicator |
|
|
* | 180 | UART3_SIR_IN | UART3 Serial Infrared Input |
|
|
* | 181 | UART3_DTR | UART3 Data Terminal Ready |
|
|
* | 182 | UART3_RTS | UART3 Request To Send |
|
|
* | 183 | UART3_OUT2 | UART3 User-designated Output 2 |
|
|
* | 184 | UART3_OUT1 | UART3 User-designated Output 1 |
|
|
* | 185 | UART3_SIR_OUT | UART3 Serial Infrared Output |
|
|
* | 186 | UART3_BAUD | UART3 Transmit Clock Output |
|
|
* | 187 | UART3_RE | UART3 Receiver Output Enable |
|
|
* | 188 | UART3_DE | UART3 Driver Output Enable |
|
|
* | 189 | UART3_RS485_EN | UART3 RS485 Enable |
|
|
* | 190 | TIMER0_TOGGLE1 | TIMER0 Toggle Output 1 |
|
|
* | 191 | TIMER0_TOGGLE2 | TIMER0 Toggle Output 2 |
|
|
* | 192 | TIMER0_TOGGLE3 | TIMER0 Toggle Output 3 |
|
|
* | 193 | TIMER0_TOGGLE4 | TIMER0 Toggle Output 4 |
|
|
* | 194 | TIMER1_TOGGLE1 | TIMER1 Toggle Output 1 |
|
|
* | 195 | TIMER1_TOGGLE2 | TIMER1 Toggle Output 2 |
|
|
* | 196 | TIMER1_TOGGLE3 | TIMER1 Toggle Output 3 |
|
|
* | 197 | TIMER1_TOGGLE4 | TIMER1 Toggle Output 4 |
|
|
* | 198 | TIMER2_TOGGLE1 | TIMER2 Toggle Output 1 |
|
|
* | 199 | TIMER2_TOGGLE2 | TIMER2 Toggle Output 2 |
|
|
* | 200 | TIMER2_TOGGLE3 | TIMER2 Toggle Output 3 |
|
|
* | 201 | TIMER2_TOGGLE4 | TIMER2 Toggle Output 4 |
|
|
* | 202 | CLK_SPI2 | Clock SPI2 |
|
|
* | 203 | CLK_I2C2 | Clock I2C2 |
|
|
* | 204 | INTERNAL0 | Internal function signal 0 |
|
|
* | 205 | INTERNAL1 | Internal function signal 1 |
|
|
* | 206 | INTERNAL2 | Internal function signal 2 |
|
|
* | 207 | INTERNAL3 | Internal function signal 3 |
|
|
* | 208 | INTERNAL4 | Internal function signal 4 |
|
|
* | 209 | INTERNAL5 | Internal function signal 5 |
|
|
* | 210 | INTERNAL6 | Internal function signal 6 |
|
|
* | 211 | INTERNAL7 | Internal function signal 7 |
|
|
* | 212 | INTERNAL8 | Internal function signal 8 |
|
|
* | 213 | INTERNAL9 | Internal function signal 9 |
|
|
* | 214 | INTERNAL10 | Internal function signal 10 |
|
|
* | 215 | INTERNAL11 | Internal function signal 11 |
|
|
* | 216 | INTERNAL12 | Internal function signal 12 |
|
|
* | 217 | INTERNAL13 | Internal function signal 13 |
|
|
* | 218 | INTERNAL14 | Internal function signal 14 |
|
|
* | 219 | INTERNAL15 | Internal function signal 15 |
|
|
* | 220 | INTERNAL16 | Internal function signal 16 |
|
|
* | 221 | INTERNAL17 | Internal function signal 17 |
|
|
* | 222 | CONSTANT | Constant function |
|
|
* | 223 | INTERNAL18 | Internal function signal 18 |
|
|
* | 224 | DEBUG0 | Debug function 0 |
|
|
* | 225 | DEBUG1 | Debug function 1 |
|
|
* | 226 | DEBUG2 | Debug function 2 |
|
|
* | 227 | DEBUG3 | Debug function 3 |
|
|
* | 228 | DEBUG4 | Debug function 4 |
|
|
* | 229 | DEBUG5 | Debug function 5 |
|
|
* | 230 | DEBUG6 | Debug function 6 |
|
|
* | 231 | DEBUG7 | Debug function 7 |
|
|
* | 232 | DEBUG8 | Debug function 8 |
|
|
* | 233 | DEBUG9 | Debug function 9 |
|
|
* | 234 | DEBUG10 | Debug function 10 |
|
|
* | 235 | DEBUG11 | Debug function 11 |
|
|
* | 236 | DEBUG12 | Debug function 12 |
|
|
* | 237 | DEBUG13 | Debug function 13 |
|
|
* | 238 | DEBUG14 | Debug function 14 |
|
|
* | 239 | DEBUG15 | Debug function 15 |
|
|
* | 240 | DEBUG16 | Debug function 16 |
|
|
* | 241 | DEBUG17 | Debug function 17 |
|
|
* | 242 | DEBUG18 | Debug function 18 |
|
|
* | 243 | DEBUG19 | Debug function 19 |
|
|
* | 244 | DEBUG20 | Debug function 20 |
|
|
* | 245 | DEBUG21 | Debug function 21 |
|
|
* | 246 | DEBUG22 | Debug function 22 |
|
|
* | 247 | DEBUG23 | Debug function 23 |
|
|
* | 248 | DEBUG24 | Debug function 24 |
|
|
* | 249 | DEBUG25 | Debug function 25 |
|
|
* | 250 | DEBUG26 | Debug function 26 |
|
|
* | 251 | DEBUG27 | Debug function 27 |
|
|
* | 252 | DEBUG28 | Debug function 28 |
|
|
* | 253 | DEBUG29 | Debug function 29 |
|
|
* | 254 | DEBUG30 | Debug function 30 |
|
|
* | 255 | DEBUG31 | Debug function 31 |
|
|
*
|
|
* Any IO of FPIOA have 256 functions, it is a IO-function matrix.
|
|
* All IO have default reset function, after reset, re-configure
|
|
* IO function is required.
|
|
*/
|
|
|
|
/* clang-format off */
|
|
typedef enum _fpioa_function
|
|
{
|
|
FUNC_JTAG_TCLK = 0, /*!< JTAG Test Clock */
|
|
FUNC_JTAG_TDI = 1, /*!< JTAG Test Data In */
|
|
FUNC_JTAG_TMS = 2, /*!< JTAG Test Mode Select */
|
|
FUNC_JTAG_TDO = 3, /*!< JTAG Test Data Out */
|
|
FUNC_SPI0_D0 = 4, /*!< SPI0 Data 0 */
|
|
FUNC_SPI0_D1 = 5, /*!< SPI0 Data 1 */
|
|
FUNC_SPI0_D2 = 6, /*!< SPI0 Data 2 */
|
|
FUNC_SPI0_D3 = 7, /*!< SPI0 Data 3 */
|
|
FUNC_SPI0_D4 = 8, /*!< SPI0 Data 4 */
|
|
FUNC_SPI0_D5 = 9, /*!< SPI0 Data 5 */
|
|
FUNC_SPI0_D6 = 10, /*!< SPI0 Data 6 */
|
|
FUNC_SPI0_D7 = 11, /*!< SPI0 Data 7 */
|
|
FUNC_SPI0_SS0 = 12, /*!< SPI0 Chip Select 0 */
|
|
FUNC_SPI0_SS1 = 13, /*!< SPI0 Chip Select 1 */
|
|
FUNC_SPI0_SS2 = 14, /*!< SPI0 Chip Select 2 */
|
|
FUNC_SPI0_SS3 = 15, /*!< SPI0 Chip Select 3 */
|
|
FUNC_SPI0_ARB = 16, /*!< SPI0 Arbitration */
|
|
FUNC_SPI0_SCLK = 17, /*!< SPI0 Serial Clock */
|
|
FUNC_UARTHS_RX = 18, /*!< UART High speed Receiver */
|
|
FUNC_UARTHS_TX = 19, /*!< UART High speed Transmitter */
|
|
FUNC_RESV6 = 20, /*!< Reserved function */
|
|
FUNC_RESV7 = 21, /*!< Reserved function */
|
|
FUNC_CLK_SPI1 = 22, /*!< Clock SPI1 */
|
|
FUNC_CLK_I2C1 = 23, /*!< Clock I2C1 */
|
|
FUNC_GPIOHS0 = 24, /*!< GPIO High speed 0 */
|
|
FUNC_GPIOHS1 = 25, /*!< GPIO High speed 1 */
|
|
FUNC_GPIOHS2 = 26, /*!< GPIO High speed 2 */
|
|
FUNC_GPIOHS3 = 27, /*!< GPIO High speed 3 */
|
|
FUNC_GPIOHS4 = 28, /*!< GPIO High speed 4 */
|
|
FUNC_GPIOHS5 = 29, /*!< GPIO High speed 5 */
|
|
FUNC_GPIOHS6 = 30, /*!< GPIO High speed 6 */
|
|
FUNC_GPIOHS7 = 31, /*!< GPIO High speed 7 */
|
|
FUNC_GPIOHS8 = 32, /*!< GPIO High speed 8 */
|
|
FUNC_GPIOHS9 = 33, /*!< GPIO High speed 9 */
|
|
FUNC_GPIOHS10 = 34, /*!< GPIO High speed 10 */
|
|
FUNC_GPIOHS11 = 35, /*!< GPIO High speed 11 */
|
|
FUNC_GPIOHS12 = 36, /*!< GPIO High speed 12 */
|
|
FUNC_GPIOHS13 = 37, /*!< GPIO High speed 13 */
|
|
FUNC_GPIOHS14 = 38, /*!< GPIO High speed 14 */
|
|
FUNC_GPIOHS15 = 39, /*!< GPIO High speed 15 */
|
|
FUNC_GPIOHS16 = 40, /*!< GPIO High speed 16 */
|
|
FUNC_GPIOHS17 = 41, /*!< GPIO High speed 17 */
|
|
FUNC_GPIOHS18 = 42, /*!< GPIO High speed 18 */
|
|
FUNC_GPIOHS19 = 43, /*!< GPIO High speed 19 */
|
|
FUNC_GPIOHS20 = 44, /*!< GPIO High speed 20 */
|
|
FUNC_GPIOHS21 = 45, /*!< GPIO High speed 21 */
|
|
FUNC_GPIOHS22 = 46, /*!< GPIO High speed 22 */
|
|
FUNC_GPIOHS23 = 47, /*!< GPIO High speed 23 */
|
|
FUNC_GPIOHS24 = 48, /*!< GPIO High speed 24 */
|
|
FUNC_GPIOHS25 = 49, /*!< GPIO High speed 25 */
|
|
FUNC_GPIOHS26 = 50, /*!< GPIO High speed 26 */
|
|
FUNC_GPIOHS27 = 51, /*!< GPIO High speed 27 */
|
|
FUNC_GPIOHS28 = 52, /*!< GPIO High speed 28 */
|
|
FUNC_GPIOHS29 = 53, /*!< GPIO High speed 29 */
|
|
FUNC_GPIOHS30 = 54, /*!< GPIO High speed 30 */
|
|
FUNC_GPIOHS31 = 55, /*!< GPIO High speed 31 */
|
|
FUNC_GPIO0 = 56, /*!< GPIO pin 0 */
|
|
FUNC_GPIO1 = 57, /*!< GPIO pin 1 */
|
|
FUNC_GPIO2 = 58, /*!< GPIO pin 2 */
|
|
FUNC_GPIO3 = 59, /*!< GPIO pin 3 */
|
|
FUNC_GPIO4 = 60, /*!< GPIO pin 4 */
|
|
FUNC_GPIO5 = 61, /*!< GPIO pin 5 */
|
|
FUNC_GPIO6 = 62, /*!< GPIO pin 6 */
|
|
FUNC_GPIO7 = 63, /*!< GPIO pin 7 */
|
|
FUNC_UART1_RX = 64, /*!< UART1 Receiver */
|
|
FUNC_UART1_TX = 65, /*!< UART1 Transmitter */
|
|
FUNC_UART2_RX = 66, /*!< UART2 Receiver */
|
|
FUNC_UART2_TX = 67, /*!< UART2 Transmitter */
|
|
FUNC_UART3_RX = 68, /*!< UART3 Receiver */
|
|
FUNC_UART3_TX = 69, /*!< UART3 Transmitter */
|
|
FUNC_SPI1_D0 = 70, /*!< SPI1 Data 0 */
|
|
FUNC_SPI1_D1 = 71, /*!< SPI1 Data 1 */
|
|
FUNC_SPI1_D2 = 72, /*!< SPI1 Data 2 */
|
|
FUNC_SPI1_D3 = 73, /*!< SPI1 Data 3 */
|
|
FUNC_SPI1_D4 = 74, /*!< SPI1 Data 4 */
|
|
FUNC_SPI1_D5 = 75, /*!< SPI1 Data 5 */
|
|
FUNC_SPI1_D6 = 76, /*!< SPI1 Data 6 */
|
|
FUNC_SPI1_D7 = 77, /*!< SPI1 Data 7 */
|
|
FUNC_SPI1_SS0 = 78, /*!< SPI1 Chip Select 0 */
|
|
FUNC_SPI1_SS1 = 79, /*!< SPI1 Chip Select 1 */
|
|
FUNC_SPI1_SS2 = 80, /*!< SPI1 Chip Select 2 */
|
|
FUNC_SPI1_SS3 = 81, /*!< SPI1 Chip Select 3 */
|
|
FUNC_SPI1_ARB = 82, /*!< SPI1 Arbitration */
|
|
FUNC_SPI1_SCLK = 83, /*!< SPI1 Serial Clock */
|
|
FUNC_SPI_SLAVE_D0 = 84, /*!< SPI Slave Data 0 */
|
|
FUNC_SPI_SLAVE_SS = 85, /*!< SPI Slave Select */
|
|
FUNC_SPI_SLAVE_SCLK = 86, /*!< SPI Slave Serial Clock */
|
|
FUNC_I2S0_MCLK = 87, /*!< I2S0 Master Clock */
|
|
FUNC_I2S0_SCLK = 88, /*!< I2S0 Serial Clock(BCLK) */
|
|
FUNC_I2S0_WS = 89, /*!< I2S0 Word Select(LRCLK) */
|
|
FUNC_I2S0_IN_D0 = 90, /*!< I2S0 Serial Data Input 0 */
|
|
FUNC_I2S0_IN_D1 = 91, /*!< I2S0 Serial Data Input 1 */
|
|
FUNC_I2S0_IN_D2 = 92, /*!< I2S0 Serial Data Input 2 */
|
|
FUNC_I2S0_IN_D3 = 93, /*!< I2S0 Serial Data Input 3 */
|
|
FUNC_I2S0_OUT_D0 = 94, /*!< I2S0 Serial Data Output 0 */
|
|
FUNC_I2S0_OUT_D1 = 95, /*!< I2S0 Serial Data Output 1 */
|
|
FUNC_I2S0_OUT_D2 = 96, /*!< I2S0 Serial Data Output 2 */
|
|
FUNC_I2S0_OUT_D3 = 97, /*!< I2S0 Serial Data Output 3 */
|
|
FUNC_I2S1_MCLK = 98, /*!< I2S1 Master Clock */
|
|
FUNC_I2S1_SCLK = 99, /*!< I2S1 Serial Clock(BCLK) */
|
|
FUNC_I2S1_WS = 100, /*!< I2S1 Word Select(LRCLK) */
|
|
FUNC_I2S1_IN_D0 = 101, /*!< I2S1 Serial Data Input 0 */
|
|
FUNC_I2S1_IN_D1 = 102, /*!< I2S1 Serial Data Input 1 */
|
|
FUNC_I2S1_IN_D2 = 103, /*!< I2S1 Serial Data Input 2 */
|
|
FUNC_I2S1_IN_D3 = 104, /*!< I2S1 Serial Data Input 3 */
|
|
FUNC_I2S1_OUT_D0 = 105, /*!< I2S1 Serial Data Output 0 */
|
|
FUNC_I2S1_OUT_D1 = 106, /*!< I2S1 Serial Data Output 1 */
|
|
FUNC_I2S1_OUT_D2 = 107, /*!< I2S1 Serial Data Output 2 */
|
|
FUNC_I2S1_OUT_D3 = 108, /*!< I2S1 Serial Data Output 3 */
|
|
FUNC_I2S2_MCLK = 109, /*!< I2S2 Master Clock */
|
|
FUNC_I2S2_SCLK = 110, /*!< I2S2 Serial Clock(BCLK) */
|
|
FUNC_I2S2_WS = 111, /*!< I2S2 Word Select(LRCLK) */
|
|
FUNC_I2S2_IN_D0 = 112, /*!< I2S2 Serial Data Input 0 */
|
|
FUNC_I2S2_IN_D1 = 113, /*!< I2S2 Serial Data Input 1 */
|
|
FUNC_I2S2_IN_D2 = 114, /*!< I2S2 Serial Data Input 2 */
|
|
FUNC_I2S2_IN_D3 = 115, /*!< I2S2 Serial Data Input 3 */
|
|
FUNC_I2S2_OUT_D0 = 116, /*!< I2S2 Serial Data Output 0 */
|
|
FUNC_I2S2_OUT_D1 = 117, /*!< I2S2 Serial Data Output 1 */
|
|
FUNC_I2S2_OUT_D2 = 118, /*!< I2S2 Serial Data Output 2 */
|
|
FUNC_I2S2_OUT_D3 = 119, /*!< I2S2 Serial Data Output 3 */
|
|
FUNC_RESV0 = 120, /*!< Reserved function */
|
|
FUNC_RESV1 = 121, /*!< Reserved function */
|
|
FUNC_RESV2 = 122, /*!< Reserved function */
|
|
FUNC_RESV3 = 123, /*!< Reserved function */
|
|
FUNC_RESV4 = 124, /*!< Reserved function */
|
|
FUNC_RESV5 = 125, /*!< Reserved function */
|
|
FUNC_I2C0_SCLK = 126, /*!< I2C0 Serial Clock */
|
|
FUNC_I2C0_SDA = 127, /*!< I2C0 Serial Data */
|
|
FUNC_I2C1_SCLK = 128, /*!< I2C1 Serial Clock */
|
|
FUNC_I2C1_SDA = 129, /*!< I2C1 Serial Data */
|
|
FUNC_I2C2_SCLK = 130, /*!< I2C2 Serial Clock */
|
|
FUNC_I2C2_SDA = 131, /*!< I2C2 Serial Data */
|
|
FUNC_CMOS_XCLK = 132, /*!< DVP System Clock */
|
|
FUNC_CMOS_RST = 133, /*!< DVP System Reset */
|
|
FUNC_CMOS_PWDN = 134, /*!< DVP Power Down Mode */
|
|
FUNC_CMOS_VSYNC = 135, /*!< DVP Vertical Sync */
|
|
FUNC_CMOS_HREF = 136, /*!< DVP Horizontal Reference output */
|
|
FUNC_CMOS_PCLK = 137, /*!< Pixel Clock */
|
|
FUNC_CMOS_D0 = 138, /*!< Data Bit 0 */
|
|
FUNC_CMOS_D1 = 139, /*!< Data Bit 1 */
|
|
FUNC_CMOS_D2 = 140, /*!< Data Bit 2 */
|
|
FUNC_CMOS_D3 = 141, /*!< Data Bit 3 */
|
|
FUNC_CMOS_D4 = 142, /*!< Data Bit 4 */
|
|
FUNC_CMOS_D5 = 143, /*!< Data Bit 5 */
|
|
FUNC_CMOS_D6 = 144, /*!< Data Bit 6 */
|
|
FUNC_CMOS_D7 = 145, /*!< Data Bit 7 */
|
|
FUNC_SCCB_SCLK = 146, /*!< SCCB Serial Clock */
|
|
FUNC_SCCB_SDA = 147, /*!< SCCB Serial Data */
|
|
FUNC_UART1_CTS = 148, /*!< UART1 Clear To Send */
|
|
FUNC_UART1_DSR = 149, /*!< UART1 Data Set Ready */
|
|
FUNC_UART1_DCD = 150, /*!< UART1 Data Carrier Detect */
|
|
FUNC_UART1_RI = 151, /*!< UART1 Ring Indicator */
|
|
FUNC_UART1_SIR_IN = 152, /*!< UART1 Serial Infrared Input */
|
|
FUNC_UART1_DTR = 153, /*!< UART1 Data Terminal Ready */
|
|
FUNC_UART1_RTS = 154, /*!< UART1 Request To Send */
|
|
FUNC_UART1_OUT2 = 155, /*!< UART1 User-designated Output 2 */
|
|
FUNC_UART1_OUT1 = 156, /*!< UART1 User-designated Output 1 */
|
|
FUNC_UART1_SIR_OUT = 157, /*!< UART1 Serial Infrared Output */
|
|
FUNC_UART1_BAUD = 158, /*!< UART1 Transmit Clock Output */
|
|
FUNC_UART1_RE = 159, /*!< UART1 Receiver Output Enable */
|
|
FUNC_UART1_DE = 160, /*!< UART1 Driver Output Enable */
|
|
FUNC_UART1_RS485_EN = 161, /*!< UART1 RS485 Enable */
|
|
FUNC_UART2_CTS = 162, /*!< UART2 Clear To Send */
|
|
FUNC_UART2_DSR = 163, /*!< UART2 Data Set Ready */
|
|
FUNC_UART2_DCD = 164, /*!< UART2 Data Carrier Detect */
|
|
FUNC_UART2_RI = 165, /*!< UART2 Ring Indicator */
|
|
FUNC_UART2_SIR_IN = 166, /*!< UART2 Serial Infrared Input */
|
|
FUNC_UART2_DTR = 167, /*!< UART2 Data Terminal Ready */
|
|
FUNC_UART2_RTS = 168, /*!< UART2 Request To Send */
|
|
FUNC_UART2_OUT2 = 169, /*!< UART2 User-designated Output 2 */
|
|
FUNC_UART2_OUT1 = 170, /*!< UART2 User-designated Output 1 */
|
|
FUNC_UART2_SIR_OUT = 171, /*!< UART2 Serial Infrared Output */
|
|
FUNC_UART2_BAUD = 172, /*!< UART2 Transmit Clock Output */
|
|
FUNC_UART2_RE = 173, /*!< UART2 Receiver Output Enable */
|
|
FUNC_UART2_DE = 174, /*!< UART2 Driver Output Enable */
|
|
FUNC_UART2_RS485_EN = 175, /*!< UART2 RS485 Enable */
|
|
FUNC_UART3_CTS = 176, /*!< UART3 Clear To Send */
|
|
FUNC_UART3_DSR = 177, /*!< UART3 Data Set Ready */
|
|
FUNC_UART3_DCD = 178, /*!< UART3 Data Carrier Detect */
|
|
FUNC_UART3_RI = 179, /*!< UART3 Ring Indicator */
|
|
FUNC_UART3_SIR_IN = 180, /*!< UART3 Serial Infrared Input */
|
|
FUNC_UART3_DTR = 181, /*!< UART3 Data Terminal Ready */
|
|
FUNC_UART3_RTS = 182, /*!< UART3 Request To Send */
|
|
FUNC_UART3_OUT2 = 183, /*!< UART3 User-designated Output 2 */
|
|
FUNC_UART3_OUT1 = 184, /*!< UART3 User-designated Output 1 */
|
|
FUNC_UART3_SIR_OUT = 185, /*!< UART3 Serial Infrared Output */
|
|
FUNC_UART3_BAUD = 186, /*!< UART3 Transmit Clock Output */
|
|
FUNC_UART3_RE = 187, /*!< UART3 Receiver Output Enable */
|
|
FUNC_UART3_DE = 188, /*!< UART3 Driver Output Enable */
|
|
FUNC_UART3_RS485_EN = 189, /*!< UART3 RS485 Enable */
|
|
FUNC_TIMER0_TOGGLE1 = 190, /*!< TIMER0 Toggle Output 1 */
|
|
FUNC_TIMER0_TOGGLE2 = 191, /*!< TIMER0 Toggle Output 2 */
|
|
FUNC_TIMER0_TOGGLE3 = 192, /*!< TIMER0 Toggle Output 3 */
|
|
FUNC_TIMER0_TOGGLE4 = 193, /*!< TIMER0 Toggle Output 4 */
|
|
FUNC_TIMER1_TOGGLE1 = 194, /*!< TIMER1 Toggle Output 1 */
|
|
FUNC_TIMER1_TOGGLE2 = 195, /*!< TIMER1 Toggle Output 2 */
|
|
FUNC_TIMER1_TOGGLE3 = 196, /*!< TIMER1 Toggle Output 3 */
|
|
FUNC_TIMER1_TOGGLE4 = 197, /*!< TIMER1 Toggle Output 4 */
|
|
FUNC_TIMER2_TOGGLE1 = 198, /*!< TIMER2 Toggle Output 1 */
|
|
FUNC_TIMER2_TOGGLE2 = 199, /*!< TIMER2 Toggle Output 2 */
|
|
FUNC_TIMER2_TOGGLE3 = 200, /*!< TIMER2 Toggle Output 3 */
|
|
FUNC_TIMER2_TOGGLE4 = 201, /*!< TIMER2 Toggle Output 4 */
|
|
FUNC_CLK_SPI2 = 202, /*!< Clock SPI2 */
|
|
FUNC_CLK_I2C2 = 203, /*!< Clock I2C2 */
|
|
FUNC_INTERNAL0 = 204, /*!< Internal function signal 0 */
|
|
FUNC_INTERNAL1 = 205, /*!< Internal function signal 1 */
|
|
FUNC_INTERNAL2 = 206, /*!< Internal function signal 2 */
|
|
FUNC_INTERNAL3 = 207, /*!< Internal function signal 3 */
|
|
FUNC_INTERNAL4 = 208, /*!< Internal function signal 4 */
|
|
FUNC_INTERNAL5 = 209, /*!< Internal function signal 5 */
|
|
FUNC_INTERNAL6 = 210, /*!< Internal function signal 6 */
|
|
FUNC_INTERNAL7 = 211, /*!< Internal function signal 7 */
|
|
FUNC_INTERNAL8 = 212, /*!< Internal function signal 8 */
|
|
FUNC_INTERNAL9 = 213, /*!< Internal function signal 9 */
|
|
FUNC_INTERNAL10 = 214, /*!< Internal function signal 10 */
|
|
FUNC_INTERNAL11 = 215, /*!< Internal function signal 11 */
|
|
FUNC_INTERNAL12 = 216, /*!< Internal function signal 12 */
|
|
FUNC_INTERNAL13 = 217, /*!< Internal function signal 13 */
|
|
FUNC_INTERNAL14 = 218, /*!< Internal function signal 14 */
|
|
FUNC_INTERNAL15 = 219, /*!< Internal function signal 15 */
|
|
FUNC_INTERNAL16 = 220, /*!< Internal function signal 16 */
|
|
FUNC_INTERNAL17 = 221, /*!< Internal function signal 17 */
|
|
FUNC_CONSTANT = 222, /*!< Constant function */
|
|
FUNC_INTERNAL18 = 223, /*!< Internal function signal 18 */
|
|
FUNC_DEBUG0 = 224, /*!< Debug function 0 */
|
|
FUNC_DEBUG1 = 225, /*!< Debug function 1 */
|
|
FUNC_DEBUG2 = 226, /*!< Debug function 2 */
|
|
FUNC_DEBUG3 = 227, /*!< Debug function 3 */
|
|
FUNC_DEBUG4 = 228, /*!< Debug function 4 */
|
|
FUNC_DEBUG5 = 229, /*!< Debug function 5 */
|
|
FUNC_DEBUG6 = 230, /*!< Debug function 6 */
|
|
FUNC_DEBUG7 = 231, /*!< Debug function 7 */
|
|
FUNC_DEBUG8 = 232, /*!< Debug function 8 */
|
|
FUNC_DEBUG9 = 233, /*!< Debug function 9 */
|
|
FUNC_DEBUG10 = 234, /*!< Debug function 10 */
|
|
FUNC_DEBUG11 = 235, /*!< Debug function 11 */
|
|
FUNC_DEBUG12 = 236, /*!< Debug function 12 */
|
|
FUNC_DEBUG13 = 237, /*!< Debug function 13 */
|
|
FUNC_DEBUG14 = 238, /*!< Debug function 14 */
|
|
FUNC_DEBUG15 = 239, /*!< Debug function 15 */
|
|
FUNC_DEBUG16 = 240, /*!< Debug function 16 */
|
|
FUNC_DEBUG17 = 241, /*!< Debug function 17 */
|
|
FUNC_DEBUG18 = 242, /*!< Debug function 18 */
|
|
FUNC_DEBUG19 = 243, /*!< Debug function 19 */
|
|
FUNC_DEBUG20 = 244, /*!< Debug function 20 */
|
|
FUNC_DEBUG21 = 245, /*!< Debug function 21 */
|
|
FUNC_DEBUG22 = 246, /*!< Debug function 22 */
|
|
FUNC_DEBUG23 = 247, /*!< Debug function 23 */
|
|
FUNC_DEBUG24 = 248, /*!< Debug function 24 */
|
|
FUNC_DEBUG25 = 249, /*!< Debug function 25 */
|
|
FUNC_DEBUG26 = 250, /*!< Debug function 26 */
|
|
FUNC_DEBUG27 = 251, /*!< Debug function 27 */
|
|
FUNC_DEBUG28 = 252, /*!< Debug function 28 */
|
|
FUNC_DEBUG29 = 253, /*!< Debug function 29 */
|
|
FUNC_DEBUG30 = 254, /*!< Debug function 30 */
|
|
FUNC_DEBUG31 = 255, /*!< Debug function 31 */
|
|
FUNC_MAX = 256, /*!< Function numbers */
|
|
} fpioa_function_t;
|
|
/* clang-format on */
|
|
|
|
/**
|
|
* @brief FPIOA pull settings
|
|
*
|
|
* @note FPIOA pull settings description
|
|
*
|
|
* | PU | PD | Description |
|
|
* |-----|-----|-----------------------------------|
|
|
* | 0 | 0 | No Pull |
|
|
* | 0 | 1 | Pull Down |
|
|
* | 1 | 0 | Pull Up |
|
|
* | 1 | 1 | Undefined |
|
|
*
|
|
*/
|
|
|
|
/* clang-format off */
|
|
typedef enum _fpioa_pull
|
|
{
|
|
FPIOA_PULL_NONE, /*!< No Pull */
|
|
FPIOA_PULL_DOWN, /*!< Pull Down */
|
|
FPIOA_PULL_UP, /*!< Pull Up */
|
|
FPIOA_PULL_MAX /*!< Count of pull settings */
|
|
} fpioa_pull_t;
|
|
/* clang-format on */
|
|
|
|
/**
|
|
* @brief FPIOA driving settings
|
|
*
|
|
* @note FPIOA driving settings description
|
|
* There are 16 kinds of driving settings
|
|
*
|
|
* @note Low Level Output Current
|
|
*
|
|
* |DS[3:0] |Min(mA)|Typ(mA)|Max(mA)|
|
|
* |--------|-------|-------|-------|
|
|
* |0000 |3.2 |5.4 |8.3 |
|
|
* |0001 |4.7 |8.0 |12.3 |
|
|
* |0010 |6.3 |10.7 |16.4 |
|
|
* |0011 |7.8 |13.2 |20.2 |
|
|
* |0100 |9.4 |15.9 |24.2 |
|
|
* |0101 |10.9 |18.4 |28.1 |
|
|
* |0110 |12.4 |20.9 |31.8 |
|
|
* |0111 |13.9 |23.4 |35.5 |
|
|
*
|
|
* @note High Level Output Current
|
|
*
|
|
* |DS[3:0] |Min(mA)|Typ(mA)|Max(mA)|
|
|
* |--------|-------|-------|-------|
|
|
* |0000 |5.0 |7.6 |11.2 |
|
|
* |0001 |7.5 |11.4 |16.8 |
|
|
* |0010 |10.0 |15.2 |22.3 |
|
|
* |0011 |12.4 |18.9 |27.8 |
|
|
* |0100 |14.9 |22.6 |33.3 |
|
|
* |0101 |17.4 |26.3 |38.7 |
|
|
* |0110 |19.8 |30.0 |44.1 |
|
|
* |0111 |22.3 |33.7 |49.5 |
|
|
*
|
|
*/
|
|
|
|
/* clang-format off */
|
|
typedef enum _fpioa_driving
|
|
{
|
|
FPIOA_DRIVING_0, /*!< 0000 */
|
|
FPIOA_DRIVING_1, /*!< 0001 */
|
|
FPIOA_DRIVING_2, /*!< 0010 */
|
|
FPIOA_DRIVING_3, /*!< 0011 */
|
|
FPIOA_DRIVING_4, /*!< 0100 */
|
|
FPIOA_DRIVING_5, /*!< 0101 */
|
|
FPIOA_DRIVING_6, /*!< 0110 */
|
|
FPIOA_DRIVING_7, /*!< 0111 */
|
|
FPIOA_DRIVING_8, /*!< 1000 */
|
|
FPIOA_DRIVING_9, /*!< 1001 */
|
|
FPIOA_DRIVING_10, /*!< 1010 */
|
|
FPIOA_DRIVING_11, /*!< 1011 */
|
|
FPIOA_DRIVING_12, /*!< 1100 */
|
|
FPIOA_DRIVING_13, /*!< 1101 */
|
|
FPIOA_DRIVING_14, /*!< 1110 */
|
|
FPIOA_DRIVING_15, /*!< 1111 */
|
|
FPIOA_DRIVING_MAX /*!< Count of driving settings */
|
|
} fpioa_driving_t;
|
|
/* clang-format on */
|
|
|
|
/**
|
|
* @brief FPIOA IO
|
|
*
|
|
* FPIOA IO is the specific pin of the chip package. Every IO
|
|
* has a 32bit width register that can independently implement
|
|
* schmitt trigger, invert input, invert output, strong pull
|
|
* up, driving selector, static input and static output. And more,
|
|
* it can implement any pin of any peripheral devices.
|
|
*
|
|
* @note FPIOA IO's register bits Layout
|
|
*
|
|
* | Bits | Name |Description |
|
|
* |-----------|----------|---------------------------------------------------|
|
|
* | 31 | PAD_DI | Read current IO's data input. |
|
|
* | 30:24 | NA | Reserved bits. |
|
|
* | 23 | ST | Schmitt trigger. |
|
|
* | 22 | DI_INV | Invert Data input. |
|
|
* | 21 | IE_INV | Invert the input enable signal. |
|
|
* | 20 | IE_EN | Input enable. It can disable or enable IO input. |
|
|
* | 19 | SL | Slew rate control enable. |
|
|
* | 18 | SPU | Strong pull up. |
|
|
* | 17 | PD | Pull select: 0 for pull down, 1 for pull up. |
|
|
* | 16 | PU | Pull enable. |
|
|
* | 15 | DO_INV | Invert the result of data output select (DO_SEL). |
|
|
* | 14 | DO_SEL | Data output select: 0 for DO, 1 for OE. |
|
|
* | 13 | OE_INV | Invert the output enable signal. |
|
|
* | 12 | OE_EN | Output enable.It can disable or enable IO output. |
|
|
* | 11:8 | DS | Driving selector. |
|
|
* | 7:0 | CH_SEL | Channel select from 256 input. |
|
|
*
|
|
*/
|
|
typedef struct _fpioa_io_config
|
|
{
|
|
uint32_t ch_sel : 8;
|
|
/*!< Channel select from 256 input. */
|
|
uint32_t ds : 4;
|
|
/*!< Driving selector. */
|
|
uint32_t oe_en : 1;
|
|
/*!< Static output enable, will AND with OE_INV. */
|
|
uint32_t oe_inv : 1;
|
|
/*!< Invert output enable. */
|
|
uint32_t do_sel : 1;
|
|
/*!< Data output select: 0 for DO, 1 for OE. */
|
|
uint32_t do_inv : 1;
|
|
/*!< Invert the result of data output select (DO_SEL). */
|
|
uint32_t pu : 1;
|
|
/*!< Pull up enable. 0 for nothing, 1 for pull up. */
|
|
uint32_t pd : 1;
|
|
/*!< Pull down enable. 0 for nothing, 1 for pull down. */
|
|
uint32_t resv0 : 1;
|
|
/*!< Reserved bits. */
|
|
uint32_t sl : 1;
|
|
/*!< Slew rate control enable. */
|
|
uint32_t ie_en : 1;
|
|
/*!< Static input enable, will AND with IE_INV. */
|
|
uint32_t ie_inv : 1;
|
|
/*!< Invert input enable. */
|
|
uint32_t di_inv : 1;
|
|
/*!< Invert Data input. */
|
|
uint32_t st : 1;
|
|
/*!< Schmitt trigger. */
|
|
uint32_t resv1 : 7;
|
|
/*!< Reserved bits. */
|
|
uint32_t pad_di : 1;
|
|
/*!< Read current IO's data input. */
|
|
} __attribute__((packed, aligned(4))) fpioa_io_config_t;
|
|
|
|
/**
|
|
* @brief FPIOA tie setting
|
|
*
|
|
* FPIOA Object have 48 IO pin object and 256 bit input tie bits.
|
|
* All SPI arbitration signal will tie high by default.
|
|
*
|
|
* @note FPIOA function tie bits RAM Layout
|
|
*
|
|
* | Address | Name |Description |
|
|
* |-----------|------------------|----------------------------------|
|
|
* | 0x000 | TIE_EN[31:0] | Input tie enable bits [31:0] |
|
|
* | 0x004 | TIE_EN[63:32] | Input tie enable bits [63:32] |
|
|
* | 0x008 | TIE_EN[95:64] | Input tie enable bits [95:64] |
|
|
* | 0x00C | TIE_EN[127:96] | Input tie enable bits [127:96] |
|
|
* | 0x010 | TIE_EN[159:128] | Input tie enable bits [159:128] |
|
|
* | 0x014 | TIE_EN[191:160] | Input tie enable bits [191:160] |
|
|
* | 0x018 | TIE_EN[223:192] | Input tie enable bits [223:192] |
|
|
* | 0x01C | TIE_EN[255:224] | Input tie enable bits [255:224] |
|
|
* | 0x020 | TIE_VAL[31:0] | Input tie value bits [31:0] |
|
|
* | 0x024 | TIE_VAL[63:32] | Input tie value bits [63:32] |
|
|
* | 0x028 | TIE_VAL[95:64] | Input tie value bits [95:64] |
|
|
* | 0x02C | TIE_VAL[127:96] | Input tie value bits [127:96] |
|
|
* | 0x030 | TIE_VAL[159:128] | Input tie value bits [159:128] |
|
|
* | 0x034 | TIE_VAL[191:160] | Input tie value bits [191:160] |
|
|
* | 0x038 | TIE_VAL[223:192] | Input tie value bits [223:192] |
|
|
* | 0x03C | TIE_VAL[255:224] | Input tie value bits [255:224] |
|
|
*
|
|
* @note Function which input tie high by default
|
|
*
|
|
* | Name |Description |
|
|
* |---------------|---------------------------------------|
|
|
* | SPI0_ARB | Arbitration function of SPI master 0 |
|
|
* | SPI1_ARB | Arbitration function of SPI master 1 |
|
|
*
|
|
* Tie high means the SPI Arbitration input is 1
|
|
*
|
|
*/
|
|
typedef struct _fpioa_tie
|
|
{
|
|
uint32_t en[FUNC_MAX / 32];
|
|
/*!< FPIOA GPIO multiplexer tie enable array */
|
|
uint32_t val[FUNC_MAX / 32];
|
|
/*!< FPIOA GPIO multiplexer tie value array */
|
|
} __attribute__((packed, aligned(4))) fpioa_tie_t;
|
|
|
|
/**
|
|
* @brief FPIOA Object
|
|
*
|
|
* FPIOA Object have 48 IO pin object and 256 bit input tie bits.
|
|
* All SPI arbitration signal will tie high by default.
|
|
*
|
|
* @note FPIOA IO Pin RAM Layout
|
|
*
|
|
* | Address | Name |Description |
|
|
* |-----------|----------|--------------------------------|
|
|
* | 0x000 | PAD0 | FPIOA GPIO multiplexer io 0 |
|
|
* | 0x004 | PAD1 | FPIOA GPIO multiplexer io 1 |
|
|
* | 0x008 | PAD2 | FPIOA GPIO multiplexer io 2 |
|
|
* | 0x00C | PAD3 | FPIOA GPIO multiplexer io 3 |
|
|
* | 0x010 | PAD4 | FPIOA GPIO multiplexer io 4 |
|
|
* | 0x014 | PAD5 | FPIOA GPIO multiplexer io 5 |
|
|
* | 0x018 | PAD6 | FPIOA GPIO multiplexer io 6 |
|
|
* | 0x01C | PAD7 | FPIOA GPIO multiplexer io 7 |
|
|
* | 0x020 | PAD8 | FPIOA GPIO multiplexer io 8 |
|
|
* | 0x024 | PAD9 | FPIOA GPIO multiplexer io 9 |
|
|
* | 0x028 | PAD10 | FPIOA GPIO multiplexer io 10 |
|
|
* | 0x02C | PAD11 | FPIOA GPIO multiplexer io 11 |
|
|
* | 0x030 | PAD12 | FPIOA GPIO multiplexer io 12 |
|
|
* | 0x034 | PAD13 | FPIOA GPIO multiplexer io 13 |
|
|
* | 0x038 | PAD14 | FPIOA GPIO multiplexer io 14 |
|
|
* | 0x03C | PAD15 | FPIOA GPIO multiplexer io 15 |
|
|
* | 0x040 | PAD16 | FPIOA GPIO multiplexer io 16 |
|
|
* | 0x044 | PAD17 | FPIOA GPIO multiplexer io 17 |
|
|
* | 0x048 | PAD18 | FPIOA GPIO multiplexer io 18 |
|
|
* | 0x04C | PAD19 | FPIOA GPIO multiplexer io 19 |
|
|
* | 0x050 | PAD20 | FPIOA GPIO multiplexer io 20 |
|
|
* | 0x054 | PAD21 | FPIOA GPIO multiplexer io 21 |
|
|
* | 0x058 | PAD22 | FPIOA GPIO multiplexer io 22 |
|
|
* | 0x05C | PAD23 | FPIOA GPIO multiplexer io 23 |
|
|
* | 0x060 | PAD24 | FPIOA GPIO multiplexer io 24 |
|
|
* | 0x064 | PAD25 | FPIOA GPIO multiplexer io 25 |
|
|
* | 0x068 | PAD26 | FPIOA GPIO multiplexer io 26 |
|
|
* | 0x06C | PAD27 | FPIOA GPIO multiplexer io 27 |
|
|
* | 0x070 | PAD28 | FPIOA GPIO multiplexer io 28 |
|
|
* | 0x074 | PAD29 | FPIOA GPIO multiplexer io 29 |
|
|
* | 0x078 | PAD30 | FPIOA GPIO multiplexer io 30 |
|
|
* | 0x07C | PAD31 | FPIOA GPIO multiplexer io 31 |
|
|
* | 0x080 | PAD32 | FPIOA GPIO multiplexer io 32 |
|
|
* | 0x084 | PAD33 | FPIOA GPIO multiplexer io 33 |
|
|
* | 0x088 | PAD34 | FPIOA GPIO multiplexer io 34 |
|
|
* | 0x08C | PAD35 | FPIOA GPIO multiplexer io 35 |
|
|
* | 0x090 | PAD36 | FPIOA GPIO multiplexer io 36 |
|
|
* | 0x094 | PAD37 | FPIOA GPIO multiplexer io 37 |
|
|
* | 0x098 | PAD38 | FPIOA GPIO multiplexer io 38 |
|
|
* | 0x09C | PAD39 | FPIOA GPIO multiplexer io 39 |
|
|
* | 0x0A0 | PAD40 | FPIOA GPIO multiplexer io 40 |
|
|
* | 0x0A4 | PAD41 | FPIOA GPIO multiplexer io 41 |
|
|
* | 0x0A8 | PAD42 | FPIOA GPIO multiplexer io 42 |
|
|
* | 0x0AC | PAD43 | FPIOA GPIO multiplexer io 43 |
|
|
* | 0x0B0 | PAD44 | FPIOA GPIO multiplexer io 44 |
|
|
* | 0x0B4 | PAD45 | FPIOA GPIO multiplexer io 45 |
|
|
* | 0x0B8 | PAD46 | FPIOA GPIO multiplexer io 46 |
|
|
* | 0x0BC | PAD47 | FPIOA GPIO multiplexer io 47 |
|
|
*
|
|
*/
|
|
typedef struct _fpioa
|
|
{
|
|
fpioa_io_config_t io[FPIOA_NUM_IO];
|
|
/*!< FPIOA GPIO multiplexer io array */
|
|
fpioa_tie_t tie;
|
|
/*!< FPIOA GPIO multiplexer tie */
|
|
} __attribute__((packed, aligned(4))) fpioa_t;
|
|
|
|
/**
|
|
* @brief FPIOA object instanse
|
|
*/
|
|
extern volatile fpioa_t *const fpioa;
|
|
|
|
/**
|
|
* @brief Initialize FPIOA user custom default settings
|
|
*
|
|
* @note This function will set all FPIOA pad registers to user-defined
|
|
* values from kconfig
|
|
*
|
|
* @return result
|
|
* - 0 Success
|
|
* - Other Fail
|
|
*/
|
|
int fpioa_init(void);
|
|
|
|
/**
|
|
* @brief Get IO configuration
|
|
*
|
|
* @param[in] number The IO number
|
|
* @param cfg Pointer to struct of IO configuration for specified IO
|
|
*
|
|
* @return result
|
|
* - 0 Success
|
|
* - Other Fail
|
|
*/
|
|
int fpioa_get_io(int number, fpioa_io_config_t *cfg);
|
|
|
|
/**
|
|
* @brief Set IO configuration
|
|
*
|
|
* @param[in] number The IO number
|
|
* @param[in] cfg Pointer to struct of IO configuration for specified IO
|
|
*
|
|
* @return result
|
|
* - 0 Success
|
|
* - Other Fail
|
|
*/
|
|
int fpioa_set_io(int number, fpioa_io_config_t *cfg);
|
|
|
|
/**
|
|
* @brief Set IO configuration with function number
|
|
*
|
|
* @note The default IO configuration which bind to function number will
|
|
* set automatically
|
|
*
|
|
* @param[in] number The IO number
|
|
* @param[in] function The function enum number
|
|
*
|
|
* @return result
|
|
* - 0 Success
|
|
* - Other Fail
|
|
*/
|
|
int fpioa_set_function_raw(int number, fpioa_function_t function);
|
|
|
|
/**
|
|
* @brief Set only IO configuration with function number
|
|
*
|
|
* @note The default IO configuration which bind to function number will
|
|
* set automatically
|
|
*
|
|
* @param[in] number The IO number
|
|
* @param[in] function The function enum number
|
|
*
|
|
* @return result
|
|
* - 0 Success
|
|
* - Other Fail
|
|
*/
|
|
int fpioa_set_function(int number, fpioa_function_t function);
|
|
|
|
/**
|
|
* @brief Set tie enable to function
|
|
*
|
|
* @param[in] function The function enum number
|
|
* @param[in] enable Tie enable to set, 1 is enable, 0 is disable
|
|
*
|
|
* @return result
|
|
* - 0 Success
|
|
* - Other Fail
|
|
*/
|
|
int fpioa_set_tie_enable(fpioa_function_t function, int enable);
|
|
|
|
/**
|
|
* @brief Set tie value to function
|
|
*
|
|
* @param[in] function The function enum number
|
|
* @param[in] value Tie value to set, 1 is HIGH, 0 is LOW
|
|
*
|
|
* @return result
|
|
* - 0 Success
|
|
* - Other Fail
|
|
*/
|
|
int fpioa_set_tie_value(fpioa_function_t function, int value);
|
|
|
|
/**
|
|
* @brief Set IO pull function
|
|
*
|
|
* @param[in] number The IO number
|
|
* @param[in] pull The pull enum number
|
|
*
|
|
* @return result
|
|
* - 0 Success
|
|
* - Other Fail
|
|
*/
|
|
int fpioa_set_io_pull(int number, fpioa_pull_t pull);
|
|
|
|
/**
|
|
* @brief Get IO pull function
|
|
*
|
|
* @param[in] number The IO number
|
|
*
|
|
* @return result
|
|
* - -1 Fail
|
|
* - Other The pull enum number
|
|
*/
|
|
int fpioa_get_io_pull(int number);
|
|
|
|
/**
|
|
* @brief Set IO driving
|
|
*
|
|
* @param[in] number The IO number
|
|
* @param[in] driving The driving enum number
|
|
*
|
|
* @return result
|
|
* - 0 Success
|
|
* - Other Fail
|
|
*/
|
|
int fpioa_set_io_driving(int number, fpioa_driving_t driving);
|
|
|
|
/**
|
|
* @brief Get IO driving
|
|
*
|
|
* @param[in] number The IO number
|
|
*
|
|
* @return result
|
|
* - -1 Fail
|
|
* - Other The driving enum number
|
|
*/
|
|
int fpioa_get_io_driving(int number);
|
|
|
|
/**
|
|
* @brief Get IO by function
|
|
*
|
|
* @param[in] function The function enum number
|
|
*
|
|
* @return result
|
|
* - -1 Fail
|
|
* - Other The IO number
|
|
*/
|
|
int fpioa_get_io_by_function(fpioa_function_t function);
|
|
|
|
/**
|
|
* @brief Set IO slew rate control
|
|
*
|
|
* @param[in] number The IO number
|
|
* @param[in] sl_value Enable slew rate. 0: disable 1:enable
|
|
*
|
|
* @return result
|
|
* - 0 Success
|
|
* - Other Fail
|
|
*/
|
|
int fpioa_set_sl(int number, uint8_t sl_enable);
|
|
|
|
/**
|
|
* @brief Set IO slew rate
|
|
*
|
|
* @param[in] number The IO number
|
|
* @param[in] st_enable Enable schmitt trigger. 0: disable 1:enable
|
|
*
|
|
* @return result
|
|
* - 0 Success
|
|
* - Other Fail
|
|
*/
|
|
int fpioa_set_st(int number, uint8_t st_enable);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* _DRIVER_FPIOA_H */
|
|
|